Manipulating Backbone Planarity of Ester Functionalized Conjugated Polymer Constitutional Isomer Derivatives Blended with Molecular Acceptors for Controlling Photovoltaic Properties

Exploring both electron donor and acceptor phase components in bulk heterojunction structures has contributed to the advancement of organic photovoltaics (OPV) realizing power conversion efficiencies reaching 20%. Being able to control backbone planarity of the donor polymer, while understanding its effects on the polymer conformation and photophysical properties, fosters the groundwork for further achievements in this realm. In this report, three isomeric PM7 derivatives are designed and synthesized where the benzodithiophene-4,8-dione structure is replaced by a quaterthiophene bridge carrying two ester moieties. The placement of these two ester groups varies among three configurational isomers, which ultimately influences the chain conformations and aggregation behavior of each polymer. Specifically, PM7-D3 has ester groups attached to the inner positions of the outer thiophenes showing moderate solution aggregation; PM7-D4 has ester groups attached to the inner positions of the inner thiophenes featuring a twisted backbone with no solution aggregation behavior; and PM7-D5 has ester groups attached to the outer positions of the inner thiophenes with strong solution aggregation. PM7-D5 shows the highest average power conversion efficiency of 11.4% paired with the molecular acceptor L8-BO. In addition, the differences among the polymer backbones are expressed by their state energies and carrier mobility in the corresponding fabricated OPV devices.

The Critical Role of Materials' Interaction in Realizing Organic Field-Effect Transistors Via High-Dilution Blending with Insulating Polymers

High-performance low-band-gap polymer semiconductors are visibly colored, making them unsuitable for transparent and imperceptible electronics without reducing film thickness to the nanoscale range. Herein, we demonstrate polymer/insulator blends exhibiting favorable miscibility that improves the transparency and carrier transport in an organic field-effect transistor (OFET) device. The mesoscale structures leading to more efficient charge transport in ultrathin films relevant to the realization of transparent and flexible electronic applications are explored based on thermodynamic material interaction principles in conjunction with optical and morphological studies. By blending the commodity polymer polystyrene (PS) with two high-performing polymers, PDPP3T and P (NDI2OD-T2) (known as N2200), a drastic difference in morphology and fiber network are observed due to considerable differences in the degree of thermodynamic interaction between the conjugated polymers and PS. Intrinsic material interaction behavior establishes a long-range intermolecular interaction in the PDPP3T polymer fibrillar network dispersed in the majority (80%) PS matrix resulting in a ca. 3-fold increased transistor hole mobility of 1.15 cm² V^-1 s^-1 (highest = 1.5 cm² V^-1 s^-1) as compared to the pristine material, while PS barely affects the electron mobility in N2200. These basic findings provide important guidelines to achieve high mobility in transparent OFETs.

Novel conjugated polymers based on bis-dithieno[3,2-b;2′,3′-d]pyrrole vinylene donor and diketopyrrolopyrrole acceptor: side chain engineering in organic field effect transistors

Novel bulky and rigid vinyl-donor–DPP acceptor (D–A) polymers, poly[dithieno[3,2-b:2′,3′-d]pyrrole vinylene dithieno[3,2-b:2′,3′-d]pyrrolediketopyrrolopyrrole] (PB(DTP)V-DPP) were synthesized.

Cyano-substituted benzochalcogenadiazole-based polymer semiconductors for balanced ambipolar organic thin-film transistors

Two new cyano-substituted benzochalcogenadiazoles were copolymerized with bithiophene, and the polymers show well balanced ambipolarity in transistors.

Bright conjugated polymer nanoparticles containing a biodegradable shell produced at high yields and with tuneable optical properties by a scalable microfluidic device

This study compares the performance of a microfluidic technique and a conventional bulk method to manufacture conjugated polymer nanoparticles (CPNs) embedded within a biodegradable poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PEG_5K-PLGA_55K) matrix. The influence of PEG_5K-PLGA_55K and conjugated polymers cyano-substituted poly(p-phenylene vinylene) (CN-PPV) and poly(9,9-dioctylfluorene-2,1,3-benzothiadiazole) (F8BT) on the physicochemical properties of the CPNs was also evaluated. Both techniques enabled CPN production with high end product yields (∼70-95%). However, while the bulk technique (solvent displacement) under optimal conditions generated small nanoparticles (∼70-100 nm) with similar optical properties (quantum yields ∼35%), the microfluidic approach produced larger CPNs (140-260 nm) with significantly superior quantum yields (49-55%) and tailored emission spectra. CPNs containing CN-PPV showed smaller size distributions and tuneable emission spectra compared to F8BT systems prepared under the same conditions. The presence of PEG_5K-PLGA_55K did not affect the size or optical properties of the CPNs and provided a neutral net electric charge as is often required for biomedical applications. The microfluidics flow-based device was successfully used for the continuous preparation of CPNs over a 24 hour period. On the basis of the results presented here, it can be concluded that the microfluidic device used in this study can be used to optimize the production of bright CPNs with tailored properties with good reproducibility.

Precise Side-Chain Engineering of Thienylenevinylene-Benzotriazole-Based Conjugated Polymers with Coplanar Backbone for Organic Field Effect Transistors and CMOS-like Inverters

Two donor-acceptor (D-A) alternating conjugated polymers based on thienylenevinylene-benzotriazole (TV-BTz), PTV6B with a linear side chain and PTVEhB with a branched side chain, were synthesized and characterized for organic field effect transistors (OFETs) and complementary metal-oxide-semiconductor (CMOS)-like inverters. According to density functional theory (DFT), polymers based on TV-BTz exhibit a coplanar and rigid structure with no significant twists, which could cause to an increase in charge-carrier mobility in OFETs. Alternating alkyl side chains of the polymers impacted neither the band gap nor the energy level. However, it significantly affected the morphology and crystallinity when the polymer films were thermally annealed. To investigate the effect of thermal annealing on the morphology and crystallinity, we characterized the polymer films using atomic force microscopy (AFM) and 2D-grazing incidence X-ray diffraction (2D-GIWAXD). Fibrillary morphologies with larger domains and increased crystallinity were observed in the polymer films after thermal annealing. These polymers exhibited improved charge-carrier mobilities in annealed films at 200 °C and demonstrated optimal OFET device performance with p-type transport characteristics with charge-carrier mobilities of 1.51 cm²/(V s) (PTV6B) and 2.58 cm²/(V s) (PTVEhB). Furthermore, CMOS-like inorganic (ZnO)-organic (PTVEhB) hybrid bilayer inverter showed that the inverting voltage (V_inv) was positioned near the ideal switching point at half (1/2) of supplied voltage (V_DD) due to fairly balanced p- and n-channels.

Approaching high charge carrier mobility by alkylating both donor and acceptor units at the optimized position in conjugated polymers

A strategy for obtaining improved OFET mobility in both donor and acceptor alkylated polymer semiconductors.

High Mobility Ambipolar Diketopyrrolopyrrole-Based Conjugated Polymer Synthesized Via Direct Arylation Polycondensation

A diketopyrrolopyrrole-based conjugated polymer, PDPP-4FTVT, which exhibits ambipolar transport behavior in air with hole and electron mobilities up to 3.40 and 5.86 cm(2) V(-1) s(-1), respectively, is synthesized via direct arylation polycondensation. Incorporation of F-atoms in β-positions of thiophene rings dramatically improves the efficiency of direct arylation polycondensation.