Synergistic photocatalytic aerobic oxidation of sulfides and amines on TiO2 under visible-light irradiation

Visible-light TiO2-catalyzed synthesis of dihydrobenzofurans by oxidative [3 + 2] annulation of phenols with alkenyl phenols

An oxidative strategy for the preparation of dihydrobenzofurans via heterogeneous photocatalysis is reported. This method leverages the surface interaction between the alkenyl phenol and the TiO2 solid surface, which enables direct activation by visible light without the need for pre-functionalization or surface modification. The resulting alkenyl phenoxyl radical is proposed to be selectively captured by a neutral phenol nucleophile, rendering β-5' coupling with excellent chemo- and regio-selectivity. The reaction proceeds under benign conditions, using an inexpensive, nontoxic, and recyclable photocatalyst under visible light irradiation with air as the terminal oxidant at room temperature.

Three-Motif Molecular Junction Type Covalent Organic Frameworks for Efficient Photocatalytic Aerobic Oxidation

Covalent organic frameworks (COFs), with the features of flexible structure regulation and easy introduction of functional groups, have aroused broad interest in the field of photocatalysis. However, due to the low light absorption intensity, low photoelectron conversion efficiency, and lack of suitable active sites, it remains a great challenge to achieve efficient photocatalytic aerobic oxidation reactions. Herein, based on reticular chemistry, we rationally designed a series of three-motif molecular junction type COFs, which formed dual photosensitizer coupled redox molecular junctions containing multifunctional COF photocatalysts. Significantly, due to the strong light adsorption ability of dual photosensitizer units and integrated oxidation and reduction features, the PY-BT COF exhibited the highest activity for photocatalytic aerobic oxidation. Especially, it achieved a photocatalytic benzylamine conversion efficiency of 99.9% in 2.5 h, which is much higher than that of the two-motif molecular junctions with only one photosensitizer or redox unit lacking COFs. The mechanism of selective aerobic oxidation was studied through comprehensive experiments and density functional theory calculations. The results showed that the photoinduced electron transfer occurred from PY and then through triphenylamine to BT. Furthermore, the thermodynamics energy for benzylamine oxidation on PY-BT COF was much lower than that for others, which confirmed the synergistic effect of dual photosensitizer coupled redox molecular junction COFs. This work provided a new strategy for the design of functional COFs with three-motif molecular junctions and also represented a new insight into the multifunctional COFs for organic catalytic reactions.

New insight into highly efficient CSA@g-C3 N4 for photocatalytic oxidation of benzyl alcohol and thioanisole: NAEDS as a promoter of photoactivity under blue LED irradiation

An open new perspective has been established toward synthesizing eco-friendly CSA@g-C3 N4 employing surface engineering. The carbon nitride modified through camphorsulfonic acid was designed and developed in a category of the new generation of photocatalysts for the oxidation of benzyl alcohol and thioanisole in the existence of a natural deep eutectic solvent (NADES). In comparison with pure g-C3 N4 , not only does CSA@g-C3 N4 exhibit an extraordinarily higher ability for harvesting visible light stemming from declining the recombination rate of electrons/holes dependent on PL results but it also reveals notable photocatalytic oxidation capability in the transformation of alcohols as well as thiols into relevant compounds. In addition, non-metal compound (CSA) incorporation would result in considerably diminishing the energy band gap value from 2.8 to 2.28 eV to escalate the visible-light absorption of g-C3 N4 . While the conventional consensus implies that inherent properties of photocatalysts bring on high photoactivity, this study indicates that deploying choline chloride-urea deep eutectic solvent as an external factor plays the role of photoactivity accelerator. Furthermore, readily recycling and reusability can be achieved for the photocatalytic setup of CSA@g-C3 N4 ascribed to its heterogeneous nature with no drop in the photoactivity.

Two 3D Two-Fold Interpenetrated Dia-Like Polyoxometalate-Based Metal-Organic Frameworks: Synthesis and Sulfide Selective Oxidation Activity

Two new three-dimensional (3D) polyoxometalate-based metal-organic frameworks (POMOFs), [M2(btap)4(H2O)4(HPMo10VI Mo2VO40)] (M = Co (1) and Cd (2); btap = 3, 5-bis(1', 2', 4'-triazol-1'-yl)pyridine), have been synthesized under mild hydrothermal conditions and characterized in detail. Single-crystal X-ray diffraction (SXRD) analysis indicates that 1 and 2 are isostructural. In complexes 1 and 2, the metal ion is coordinated with the ligand to form two different left and right helical one-dimensional chains, which are alternately connected in a twisted form to build a two-fold interpenetrated three-dimensional structure, and the polyoxometalate is encapsulated into in the pores generated by the interpenetrating structure. It is noteworthy that 1 and 2, as recyclable catalysts, possess favorable heterogeneous catalytic activity and excellent sulfoxide selectivity in sulfide oxidation reactions, with H2O2 as an oxidant. By reason of the high dispersion of polyoxometalate with good intrinsic activity in the skeleton structure, the title complex has high activity. In addition, no obvious decrease of sulfoxide yield is observed after at least five cycles. These results indicate the excellent catalytic activity and sustainability of 1 and 2.

Photocatalytic Aryl Sulfide Oxidation Using 4-Nitrophenylacetylene-Modified Cu2O Crystals

4-Nitrophenylacetylene-functionalized Cu₂O rhombic dodecahedra and cubes have been used to photocatalyze aryl sulfide oxidation generating aryl sulfoxides. With an oxygen supply and light from a blue light-emitting diode (LED), the reaction can be completed in 12 h with a water and methanol mixed solution. Generally high product yields and excellent product selectivity of sulfoxides over sulfones were achieved. In particular, a thioanisole to methyl phenyl sulfoxide yield of 98% was obtained. A mechanistic study has revealed that photogenerated electrons, holes, and superoxide radicals are involved in the oxidation reaction. The benefit of simple photocatalyst preparation and molecular functionalization to boost catalytic performance shows that surface-controlled ionic solids can be very effective photocatalysts for some organic transformations.

A Photoredox/Sulfide Dual Catalysis System That Uses Sulfide Radical Cations to Promote Alkene Chlorotrifluoromethylation

Sulfides and their derivatives are among the most important class of reagent in synthetic chemistry. Despite the importance of such compounds, the use of sulfide radical cations in synthetic chemistry is underdeveloped. To address this issue, herein, we describe alkene chlorotrifluoromethylation reactions promoted by photoredox/sulfide dual catalysis systems, which involves sulfide radical cations generated through the oxidation of sulfides by a photoredox catalyst. The high functional group tolerance of this chemistry was demonstrated using natural products and drug molecules as substrate alkenes.

Highly Crystalline Ag-based Coordination Polymers for Efficient Photocatalytic Oxidation of Sulfides

Coordination polymers (CPs) display great potential for the development of highly active photocatalysts. Herein, we report the fabrication of a highly crystalline CP, [Ag₂ BTT]_n (BTT=benzene-1,2,4,5-tetrathiol). The crystal structure of [Ag₂ BTT]_n was resolved and its performance for photocatalytic oxidation of thioanisole was explored. [Ag₂ BTT]_n is highly active and selective for the photo-oxidation of sulfides to sulfoxides under mild conditions, that is, in air, at room temperature and in the absence of a sacrificial reagent, co-catalyst or redox mediator.

Aerobic Photocatalysis: Oxidation of Sulfides to Sulfoxides

Sulfoxides constitute one of the most important functional groups in organic chemistry found in numerous pharmaceuticals and natural products. Sulfoxides are usually obtained from the oxidation of the corresponding sulfides. Among various oxidants, oxygen or air are considered the greenest and most sustainable reagent. Photochemistry and photocatalysis is increasingly applied in new, as well as traditional, yet demanding, reaction, like the aerobic oxidation of sulfides to sulfoxides, since photocatalysis has provided the means to access them in mild and effective ways. In this review, we will summarize the photochemical protocols that have been developed for the oxidation of sulfides to sulfoxides, employing air or oxygen as the oxidant. The aim of this review is to present: i) a historical overview, ii) the key mechanistic studies and proposed mechanisms and iii) categorize the different catalytic systems in literature.

Designed polymeric conjugation motivates tunable activation of molecular oxygen in heterogeneous organic photosynthesis

Photocatalytic oxidative organic reactions are important synthetic transformations, and research on reaction selectivity by reactive oxygen species (ROS) is significant. To date, however, there has rarely been any focus on the directed generation of ROSs. Herein, we report the first identification of tunable molecular oxygen activation induced by polymeric conjugation in nonmetallic conjugated microporous polymers (CMP). The conjugation between these can be achieved by the introduction of alkynyl groups. CMP-A with an alkynyl bridge facilitates the intramolecular charge mobility while CMP-D, lacking an alkynyl group enhances the photoexcited carrier build-up on the surface from diffusion. These different processes dominate the directed ROS generation of the superoxide radical (O₂^-) and singlet oxygen (¹O₂), respectively. This theory is substantiated by the different performances of these CMPs in the aerobic oxidation of sulfides and the dehydrogenative coupling of amines, and could provide insight into the rational design of CMPs for various heterogeneous organic photosynthesis.

Recent Advances in Heterogeneous Photo-Driven Oxidation of Organic Molecules by Reactive Oxygen Species

The photo-driven oxidation of organic molecules into corresponding high-value-added products has become a promising method in chemical synthesis. This strategy can drive thermodynamically non-spontaneous reactions and achieve challenging thermocatalytic processes under ambient conditions. Reactive oxygen species (ROS) are not only significant intermediates for producing target products via photoinduced oxidation reactions but also contribute to the creation of sustainable chemical processes. Here, the latest advances in heterogeneous photo-driven oxidation reactions involving ROS are summarized. The major types of ROS and their generation are introduced, and the behaviors of various ROS involved in photo-driven processes are reviewed in terms of the formation of different bonds. Emphasis is placed on unraveling the reaction mechanisms of ROS and establishing strategies for their regulation, and the remaining challenges and perspectives are summarized and analyzed. This Review is expected to provide an in-depth understanding of the mechanisms of ROS involved in photo-driven oxidation processes as an important foundation for the design of efficient catalysts. Clarifying the role of ROS in oxidation reactions has important scientific significance for improving the atomic and energy efficiency of reactions in practical applications.

An overview on recent development in visible light-mediated organic synthesis over heterogeneous photo-nanocatalysts

The implementation of heterogeneous photo-nanocatalysts in organic syntheses has been investigated greatly in the last decade as a result of the increasing demand to achieve the organic reactions via the use of green approaches and through the availability of visible light source. Herein, the presented results describe the basic concepts and state-of-the-art of fundamental insight into key features that influence the catalytic performance in organic reactions to investigate and optimize a broad range of catalyzed organic transformations, that benefit the researchers in academia and chemical industry fields.

Electrophilic Chlorine from Chlorosulfonium Salts: A Highly Chemoselective Reduction of Sulfoxides

Herein, we describe a selective late-stage deoxygenation of sulfoxides based on a novel application of chlorosulfonium salts and demonstrate a new process using these species generated in situ from sulfoxides as the source of electrophilic chlorine. The use of highly nucleophilic 1,3,5-trimethoxybenzene (TMB) as the reducing agent is described for the first time and applied in the deoxygenation of simple and functionalized sulfoxides. The method is easy to handle, economic, suitable for gram-scale operations, and readily applied for poly-functionalized molecules, as demonstrated with more than 45 examples, including commercial medicines and analogues. We also report the results of competition experiments that define the more reactive sulfoxide and we present a mechanistic proposal based on substrate and product observations.

Selective Photocatalytic Oxidation of Thioanisole on DUT-67(Zr) Mediated by Surface Coordination

DUT-67(Zr) was obtained by a solvothermal route and applied to photocatalytic selective synthesis of thioanisole under light illuminating. The conversion of thioanisole is up to 95%, and the selectivity of methyl phenyl sulfoxide is 98%. The activity of DUT-67(Zr) is over 10 times higher than that of UiO-66. This great increased activity is attributed to the high percentages of oxygen vacancies on DUT-67(Zr). The ESR result shows there are more oxygen vacancies that can expose high density unsaturated Zr sites on DUT-67(Zr). The in situ FTIR reveals that unsaturated Zr sites on DUT-67(Zr) possess Lewis acidity which facilitate the adsorption of the substrates to form the coordination species, promoting the activation of thioanisole. The absorption edge of DUT-67(Zr) with coordination species red-shifts to 360 nm, which can be presented by DRS. Furthermore, the oxygen molecules can be activated by excited electrons to form ^•O₂^-. Finally, a possible photocatalytic process of oxidating thioanisole to methyl phenyl sulfoxide based on the coordination effect between DUT-67(Zr) and thioanisole is proposed at a molecular level.

Enhancing Ru(II)-Catalysis with Visible-Light-Mediated Dye-Sensitized TiO2 Photocatalysis for Oxidative C-H Olefination of Arene Carboxylic Acids at Room Temperature

Erythrosine B sensitized TiO₂ photocatalysis has been combined with Ru(II)-catalysis to accomplish an oxidative olefination/annulation of benzoic acids with activated olefins under mild conditions that tolerates useful functionalities, such as halides, free hydroxy, acetamido, etc. The morphology of the photocatalyst is unaffected during the reaction and it can be reused. Mechanistic studies favor the involvement of a photo-induced single electron transfer process.

Synthetic Approaches for C-N Bonds by TiO2 Photocatalysis

Nitrogen-containing organic compounds possess the most important status in drug molecules and agricultural chemicals. More than 80% currently used drugs have at least a C-N bond. The green and mild methodology to prepare diverse C-N bonds to replace traditional harsh preparation protocols is always a hotspot in modern synthetic chemistry. TiO₂-based nanomaterials, considered as environmentally benign, stable, and powerful photocatalysts, have recently been applied in some certain challenging organic synthesis including construction of useful C-N compounds under mild conditions that are impossible to complete by conventional catalysis. This mini review would present state-of-the-art paragon examples of TiO₂ photocatalyzed C-N bond formations. The discussion would be divided into two main sections: (1) N-alkylation of amines and (2) C-N formation in heterocycle synthesis. Especially, the mechanism of TiO₂ photocatalytic C-N bond formation through activating alcohol into C=O by photo-induced hole followed by C=NH-R formation and finally hydrogenating C=NH-R into C-N bonds by combination of photo-induced electron/H⁺ assisted with loaded-Pt would be covered in detail. We believe that the mini-review will bring new insights into TiO₂ photocatalysis applied to construct challenging organic compounds through enabling photo-induced hole and electron in a concerted way on coupling two substrate molecules together with respect to their conventionally independent catalysis behavior.

TiO₂ Photocatalysis for Transfer Hydrogenation

Catalytic transfer hydrogenation reactions, based on hydrogen sources other than gaseous H₂, are important processes that are preferential in both laboratories and factories. However, harsh conditions, such as high temperature, are usually required for most transition-metal catalytic and organocatalytic systems. Moreover, non-volatile hydrogen donors such as dihydropyridinedicarboxylate and formic acid are often required in these processes which increase the difficulty in separating products and lowered the whole atom economy. Recently, TiO₂ photocatalysis provides mild and facile access for transfer hydrogenation of C=C, C=O, N=O and C-X bonds by using volatile alcohols and amines as hydrogen sources. Upon light excitation, TiO₂ photo-induced holes have the ability to oxidatively take two hydrogen atoms off alcohols and amines under room temperature. Simultaneously, photo-induced conduction band electrons would combine with these two hydrogen atoms and smoothly hydrogenate multiple bonds and/or C-X bonds. It is heartening that practices and principles in the transfer hydrogenations of substrates containing C=C, C=O, N=O and C-X bond based on TiO₂ photocatalysis have overcome a lot of the traditional thermocatalysis' limitations and flaws which usually originate from high temperature operations. In this review, we will introduce the recent paragon examples of TiO₂ photocatalytic transfer hydrogenations used in (1) C=C and C≡C (2) C=O and C=N (3) N=O substrates and in-depth discuss basic principle, status, challenges and future directions of transfer hydrogenation mediated by TiO₂ photocatalysis.

Application of metal oxide semiconductors in light-driven organic transformations

Herein, we provide an up-to-date overview of metal oxide semiconductors (MOS) as versatile and inexpensive photocatalysts to enable light-driven organic transformations.

Recent advances in modified TiO2 for photo-induced organic synthesis

The recent advancements of modified TiO₂ materials as photocatalysts for organic synthesis are summarized.

TiO2 Photocatalyzed C–H Bond Transformation for C–C Coupling Reactions

Fulfilling the direct inert C–H bond functionalization of raw materials that are earth-abundant and commercially available for the synthesis of diverse targeted organic compounds is very desirable and its implementation would mean a great reduction of the synthetic steps required for substrate prefunctionalization such as halogenation, borylation, and metalation. Successful C–H bond functionalization mainly resorts to homogeneous transition-metal catalysis, albeit sometimes suffering from poor catalyst reusability, nontrivial separation, and severe biotoxicity. TiO2 photocatalysis displays multifaceted advantages, such as strong oxidizing ability, high chemical stability and photostability, excellent reusability, and low biotoxicity. The chemical reactions started and delivered by TiO2 photocatalysts are well known to be widely used in photocatalytic water-splitting, organic pollutant degradation, and dye-sensitized solar cells. Recently, TiO2 photocatalysis has been demonstrated to possess the unanticipated ability to trigger the transformation of inert C–H bonds for C–C, C–N, C–O, and C–X bond formation under ultraviolet light, sunlight, and even visible-light irradiation at room temperature. A few important organic products, traditionally synthesized in harsh reaction conditions and with specially functionalized group substrates, are continuously reported to be realized by TiO2 photocatalysis with simple starting materials under very mild conditions. This prominent advantage—the capability of utilizing cheap and readily available compounds for highly selective synthesis without prefunctionalized reactants such as organic halides, boronates, silanes, etc.—is attributed to the overwhelmingly powerful photo-induced hole reactivity of TiO2 photocatalysis, which does not require an elevated reaction temperature as in conventional transition-metal catalysis. Such a reaction mechanism, under typically mild conditions, is apparently different from traditional transition-metal catalysis and beyond our insights into the driving forces that transform the C–H bond for C–C bond coupling reactions. This review gives a summary of the recent progress of TiO2 photocatalytic C–H bond activation for C–C coupling reactions and discusses some model examples, especially under visible-light irradiation.

Metal- and Additive-Free Oxidation of Sulfides into Sulfoxides by Fullerene-Modified Carbon Nitride with Visible-Light Illumination

Photocatalytic selective oxidation has attracted considerable attention as an environmentally friendly strategy for organic transformations. Some methods have been reported for the photocatalytic oxidation of sulfides into sulfoxides in recent years. However, the practical application of these processes is undermined by several challenges, such as low selectivity, sluggish reaction rates, the requirement of UV-light irradiation, the use of additives, and the instability of the photocatalyst. Herein, a metal-free C₆₀ /graphitic carbon nitride (g-C₃ N₄ ) composite photocatalyst was fabricated by a facile method, and well characterized by TEM, SEM, FTIR spectroscopy, XRD, X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy, and photoluminescence spectroscopy. The C₆₀ /g-C₃ N₄ catalyst exhibited a high photocatalytic activity at room temperature for the selective oxidation of sulfides into the corresponding sulfoxides in the presence of other functional groups, due to the synergetic roles of C₆₀ and g-C₃ N₄ . Several important parameters have been screened, and this method afforded good to excellent yields of sulfoxides under optimal conditions. The superoxide radical (^. O₂^- ) and singlet oxygen (¹ O₂ ) were identified as the oxidative species for the oxidation of sulfides into sulfoxides by exploring EPR experiments, and hence, a plausible mechanism for this oxidation was proposed. Moreover, the C₆₀ /g-C₃ N₄ catalyst can be easily recovered by filtration and then reused at least four times without loss in activity.

Titanium dioxide visible light photocatalysis: surface association enables photocatalysis with visible light irradiation

Titanium dioxide (TiO₂) is a widely employed and inexpensive photocatalyst, but its use in organic synthesis has been limited by the short-wavelength ultraviolet irradiation typically used. We have discovered that TiO₂ particles efficiently mediate photocatalytic radical cation Diels-Alder cycloadditions using a simple visible light source, enabled by the formation of a visible light absorbing complex of the substrate on the semiconductor surface.

Layered tin monoselenide as advanced photothermal conversion materials for efficient solar energy-driven water evaporation

Solar energy-driven water evaporation lays a solid foundation for important photothermal applications such as sterilization, seawater desalination, and electricity generation. Due to the strong light-matter coupling, broad absorption wavelength range, and prominent quantum confinement effect, layered tin monoselenide (SnSe) holds a great potential to effectively harness solar irradiation and convert it to heat energy. In this study, SnSe is successfully deposited on a centimeter-scale nickel foam using a facile one-step pulsed-laser deposition approach. Importantly, the maximum evaporation rate of SnSe-coated nickel foam (SnSe@NF) reaches 0.85 kg m^-2 h^-1, which is even 21% larger than that obtained with the commercial super blue coating (0.7 kg m^-2 h^-1) under the same condition. A systematic analysis reveals that its good photothermal conversion capability is attributed to the synergetic effect of multi-scattering-induced light trapping and the optimal trade-off between light absorption and phonon emission. Finally, the SnSe@NF device is further used for seawater evaporation, demonstrating a comparable evaporation rate (0.8 kg m^-2 h^-1) to that of fresh water and good stability over many cycles of usage. In summary, the current contribution depicts a facile one-step scenario for the economical and efficient solar-enabled SnSe@NF evaporation devices. More importantly, an in-depth analysis of the photothermal conversion mechanism underneath the layered materials depicts a fundamental paradigm for the design and application of photothermal devices based on them in the future.

Polyoxometalate LUMO engineering: a strategy for visible-light-responsive aerobic oxygenation photocatalysts

We report efficient visible-light-responsive oxygenation photocatalysis via the strategy of LUMO engineering of polyoxometalates.

Green synthesis of PbCrO4 nanostructures using gum of ferula assa-foetida for enhancement of visible-light photocatalytic activity

Photocatalytic selective oxidation has attracted considerable attention as an environmentally friendly strategy for organic transformations.

Photocatalytic Dehydrogenation of Primary Alcohols: Selectivity Goes against Adsorptivity

Solid/liquid heterogeneous photocatalysis was often considered to occur on the active sites of a solid catalyst surface. Herein, we report that the selectivity of photocatalytic dehydrogenative oxidations of aliphatic primary alcohols in acetonitrile solution into corresponding aldehydes exhibits an anomalous relationship with adsorption behavior of the alcohols. By using Pt-loaded TiO₂ photocatalyst in an inert atmosphere under UV light illumination, primary short-chain alcohols (SCAs) with strong adsorption were dehydrogenated into aldehydes in very poor selectivity, whereas weak-adsorbable long-chain alcohols (LCAs) were transformed into corresponding aldehydes with much higher selectivity. More than 20 examples of primary LCAs (C₄-C₁₀) were successfully transformed into their corresponding aldehydes with satisfactory selectivity and yield. Both solid-state magic-angle-spinning ¹³C NMR and attenuated total reflectance-Fourier transform infrared spectroscopy studies provided concrete differences in adsorption behaviors on the Pt-TiO₂ photocatalyst surface between SCA ethanol and LCA n-octanol. To further uncover the mechanism for different selectivities of SCAs and LCAs in photodehydrogenation, in situ electron paramagnetic resonance (EPR) experiments (at 8 K temperature) were employed to observe the oxidation features of photogenerated hole in the valance band of Pt-TiO₂ (h_vb ⁺). The EPR experimental studies exhibited that unlike ethanol, either n-octanol or solvent acetonitrile alone all could not scavenge photogenerated h_vb ⁺ on Pt-P25 photocatalyst and only n-octanol dissolved in acetonitrile solvent could smoothly react with photoinduced hole. This indicated that selective oxidations of LCAs were achieved by solvent-delivered oxidation rather than directly destructive oxidation of photogenerated h_vb ⁺. Our results may open an alternative way in selective dehydrogenative oxidation of various substrates sensitive to both dioxygen and high-temperature treatments.

Merging visible light photocatalysis of dye-sensitized TiO2 with TEMPO: the selective aerobic oxidation of alcohols

Efficient visible-light-induced selective aerobic oxidation of alcohols was accomplished by merging the photocatalysis of dye-sensitized TiO₂ with TEMPO catalysis.