Magnetic MOF microreactors for recyclable size-selective biocatalysis

Ultrarapid and Sustainable Synthesis of Trimetallic-Based MOF (CrNiFe-MOF) from Stainless Steel and Disodium Terephthalate-Derived PET Wastes

Designing easy and sustainable strategies for the synthesis of metal-organic frameworks (MOFs) from organic and inorganic wastes with the efficient removal of phosphate from water remains a challenge. The majority of the reported works have utilized costly precursors and nonsoluble ligands for the synthesis of MOFs. Herein, we have developed a low-cost, simple, and sustainable alternative approach using the coprecipitation method in water at room temperature for the synthesis of a new adsorbent-based trimetallic MOF. Poly(ethylene terephthalate) and stainless steel wastes were used as sources of water-soluble disodium terephthalate ligand and three metallic species (chromium, nickel, and iron salts) for the fabrication of trimetallic MOF (CrNiFe-MOF), respectively. The newly developed MOF demonstrates a superior space-time yield of 5760 g m-3 day-1, reaching a level allowing the industrialization production of this sustainable MOF. The scanning electron microscopy and adsorption studies revealed that the developed trimetallic MOF consists of aggregated nanoparticles and the presence of defective as well as mesoporous structures. This MOF showed an enhanced adsorption capacity of phosphate from real eutrophic water samples and higher stability in a range of pHs. The density functional theory calculations evidenced that the phosphate ions preferentially adsorb over H2O toward the metal oxo-trimers, with the adsorption energies increasing from H3PO4 to PO43- species in line with an improvement of the adsorption performance of CrNiFe-MOF when the pH increases, i.e., when HPO42- and PO43- become more predominant. These calculations also supported that the incorporation of Cr metal sites in the oxo-trimer is expected to boost the phosphate affinity of the MOF. Finally, our work provides an easy and eco-friendly approach for MOF designing to enhance phosphate removal from water.

Biodiesel Production Using Palm Oil with a MOF-Lipase B Biocatalyst from Candida Antarctica: A Kinetic and Thermodynamic Study

This research presents the results of the immobilization of Candida Antarctica Lipase B (CALB) on MOF-199 and ZIF-8 and its use in the production of biodiesel through the transesterification reaction using African Palm Oil (APO). The results show that the highest adsorption capacity, the 26.9 mg·g^-1 Lipase, was achieved using ZIF-8 at 45 °C and an initial protein concentration of 1.20 mg·mL^-1. The results obtained for the adsorption equilibrium studies allow us to infer that CALB was physically adsorbed on ZIF-8 while chemically adsorbed with MOF-199. It was determined that the adsorption between Lipase and the MOFs under study better fit the Sips isotherm model. The results of the kinetic studies show that adsorption kinetics follow the Elovich model for the two synthesized biocatalysts. This research shows that under the experimental conditions in which the studies were carried out, the adsorption processes are a function of the intraparticle and film diffusion models. According to the results, the prepared biocatalysts showed a high efficiency in the transesterification reaction to produce biodiesel, with methanol as a co-solvent medium. In this work, the catalytic studies for the imidazolate, ZIF-8, presented more catalytic activity when used with CALB. This system presented 95% biodiesel conversion, while the biocatalyst formed by MOF-199 and CALB generated a catalytic conversion percentage of 90%. Although both percentages are high, it should be noted that CALB-MOF-199 presented better reusability, which is due to chemical interactions.

Buffer Effects in Zirconium-Based UiO Metal-Organic Frameworks (MOFs) That Influence Enzyme Immobilization and Catalytic Activity in Enzyme/MOF Biocatalysts

Novel biocatalysts that feature enzymes immobilized onto solid supports have recently become a major research focus in an effort to create more sustainable and greener chemistries in catalysis. Many of these novel biocatalyst systems feature enzymes immobilized onto metal-organic frameworks (MOFs), which have been shown to increase enzyme activity, stability, and recyclability in industrial processes. While the strategies used for immobilizing enzymes onto MOFs can vary, the conditions always require a buffer to maintain the functionality of the enzymes during immobilization. This report brings attention to critical buffer effects important to consider when developing enzyme/MOF biocatalysts, specifically for buffering systems containing phosphate ions. A comparative analysis of different enzyme/MOF biocatalysts featuring horseradish peroxidase and/or glucose oxidase immobilized onto the MOFs UiO-66, UiO-66-NH₂, and UiO-67 using a noncoordinate buffering system (MOPSO buffer) and a phosphate buffering system (PBS) show that phosphate ions can have an inhibitory effect. Previous studies utilizing phosphate buffers for enzyme immobilization onto MOFs have shown Fourier transform infrared (FT-IR) spectra that have been assigned stretching frequencies associated with enzymes after immobilization. Analyses and characterizations using zeta potential measurements, scanning electron microscopy, Brunauer-Emmett-Teller surface area, powder X-ray diffraction, Energy Dispersive X-ray Spectroscopy, and FT-IR show concerning differences in enzyme loading and activity based on the buffering system used during immobilization.

Biomedically-relevant metal organic framework-hydrogel composites

Metal organic frameworks (MOFs) are incredibly versatile three-dimensional porous materials with a wide range of applications that arise from their well-defined coordination structures, high surface areas and porosities, as well as ease of structural tunability due to diverse compositions achievable. In recent years, following advances in synthetic strategies, development of water-stable MOFs and surface functionalisation techniques, these porous materials have found increasing biomedical applications. In particular, the combination of MOFs with polymeric hydrogels creates a class of new composite materials that marries the high water content, tissue mimicry and biocompatibility of hydrogels with the inherent structural tunability of MOFs in various biomedical contexts. Additionally, the MOF-hydrogel composites can transcend each individual component such as by providing added stimuli-responsiveness, enhancing mechanical properties and improving the release profile of loaded drugs. In this review, we discuss the recent key advances in the design and applications of MOF-hydrogel composite materials. Following a summary of their synthetic methodologies and characterisation, we discuss the state-of-the-art in MOF-hydrogels for biomedical use - cases including drug delivery, sensing, wound treatment and biocatalysis. Through these examples, we aim to demonstrate the immense potential of MOF-hydrogel composites for biomedical applications, whilst inspiring further innovations in this exciting field.

Enzyme-Linked Metal Organic Frameworks for Biocatalytic Degradation of Antibiotics

Metal organic frameworks (MOFs) are multi-dimensional network of crystalline material held together by bonding of metal atoms and organic ligands. Owing to unique structural, chemical, and physical properties, MOFs has been used for enzyme immobilization to be employed in different catalytic process, including catalytic degradation of antibiotics. Immobilization process other than providing large surface provides enzyme with enhanced stability, catalytic activity, reusability, and selectivity. There are various approaches of enzyme immobilization over MOFs including physical adsorption, chemical bonding, diffusion and in situ encapsulation. In situ encapsulation is one the best approach that provides extra stability from unfolding and denaturation in harsh industrial conditions. Presence of antibiotic in environment is highly damaging for human in particular and ecosystem in general. Different methods such as ozonation, oxidation, chlorination and catalysis are available for degradation or removal of antibiotics from environment, however these are associated with several issues. Contrary to these, enzyme immobilized MOFs are novel system to be used in catalytic degradation of antibiotics. Enzyme@MOFs are more stable, reusable and more efficient owing to additional support of MOFs to natural enzymes in well-established process of photocatalysis for degradation of antibiotics aimed at environmental remediation. Prime focus of this review is to present catalytic degradation of antibiotics by enzyme@MOFs while outlining their synthetics approaches, characterization, and mechanism of degradation. Furthermore, this review highlights the significance of enzyme@MOFs system for antibiotics degradation in particular and environmental remediation in general. Current challenges and future perspective of research in this field are also outlined along with concluding comments.

Graphical Abstract

Facile synthesis of lipase-loaded starch nanoparticles as recyclable biocatalyst in Pickering interfacial systems

To develop recyclable biocatalyst used in Pickering interfacial systems, the pH-responsive monomer [2-(dimethylamine)ethyl methacrylate] (DMAEMA) was grafted onto the maize starch molecule via free radical polymerization. Subsequently, combined with the gelatinization-ethanol precipitation and lipase (Candida rugosa) absorption process, an enzyme-loaded starch nanoparticle with DMAEMA grafting (D-SNP@CRL) was tailor-made, showing a nanometer size and regular sphere. X-ray photoelectron spectroscopy and confocal laser scanning microscopy confirmed a concentration-induced enzyme distribution within D-SNP@CRL, thereof the outside-to-inside enzyme distribution was proved to be optimum in achieving the highest catalytic efficiency. Benefited from the tunable wettability and size of D-SNP@CRL under pH variation, the generated Pickering emulsion could be readily applied as the recyclable microreactors for the n-butanol/vinyl acetate transesterification. This catalysis exhibited both highly catalytic activity and good recyclability, making the enzyme-loaded starch particle a promising green and sustainable biocatalyst in the Pickering interfacial system.

Fluorine extraction from organofluorine molecules to make fluorinated clusters in yttrium MOFs

A new rare earth based two-dimensional coordination network and a three-dimensional metal-organic framework (MOF) have been synthesized using bicinchoninic acid (BCA) and yttrium(iii) ions. Yttrium dimer nodes are formed in the absence of a modulator, resulting in a 2D layered coordination network (Y-BCA-2D). The presence of fluorinating agents, e.g., 2-fluorobenzoic acid (2-FBA), 2,6-difluorobenzoic acid (2,6-DFBA), and perfluorohexanoic acid (PFHxA) result in μ₃-F bridged metal hexaclusters (Y₆F₈) that form a three-dimensional MOF (Y-BCA-3D). It was found that Y³⁺ can break highly stable C-F bonds in aromatic and aliphatic fluorinated compounds. Single-crystal X-ray diffraction (SC-XRD) shows the presence of fluorine in the metal cluster which was confirmed by energy dispersive X-ray spectroscopy (EDS). High resolution X-ray photoelectron spectroscopy (XPS) and ¹⁹F Nuclear Magnetic Resonance (NMR) also verify the presence of metal-fluorine bonds in the cluster. The Y-BCA-3D MOF selectively adsorbs CO₂ but not N₂.

Immobilization of a Bienzymatic System via Crosslinking to a Metal‐Organic Framework

A leading biotechnological advancement in the field of biocatalysis is the immobilization of enzymes on solid supports to create more stable and recyclable systems. Metal-organic frameworks (MOFs) are porous materials that have been explored as solid supports for enzyme immobilization. Composed of organic linkers and inorganic nodes, MOFs feature empty void space with large surface areas and have the ability to be modified post-synthesis. Our target enzyme system for immobilization is glucose oxidase (GOx) and chloroperoxidase (CPO). Glucose oxidase catalyzes the oxidation of glucose and is used for many applications in biosensing, biofuel cells, and food production. Chloroperoxidase is a fungal heme enzyme that catalyzes peroxide-dependent halogenation, oxidation, and hydroxylation. These two enzymes work sequentially in this enzyme system by GOx producing peroxide, which activates CPO that reacts with a suitable substrate. This study focuses on using a zirconium-based MOF, UiO-66-NH2, to immobilize the enzyme system via crosslinking with the MOF’s amine group on the surface of the MOF. This study investigates two different crosslinkers: disuccinimidyl glutarate (DSG) and 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC)/N-hydroxysuccinidimide (NHS), providing stable crosslinking of the MOF to the enzymes. The two crosslinkers are used to covalently bond CPO and GOx onto UiO-66-NH2, and a comparison of the recyclability and enzymatic activity of the single immobilization of CPO and the doubly immobilized CPO and GOx is discussed through assays and characterization analyses. The DSG-crosslinked composites displayed enhanced activity relative to the free enzyme, and all crosslinked enzyme/MOF composites demonstrated recyclability, with at least 30% of the activity being retained after four catalytic cycles. The results of this report will aid researchers in utilizing CPO as a biocatalyst that is more active and has greater recyclability.

Dynamic, Polymer-Integrated Crystals for Efficient, Reversible Protein Encapsulation

Crystalline materials are increasingly being used as platforms for encapsulating proteins to create stable, functional materials. However, the uptake efficiencies and stimuli-responsiveness of crystalline frameworks are limited by their rigidities. We have recently reported a new form of materials, polymer-integrated crystals (PIX), which combine the structural order of protein crystals with the dynamic, stimuli-responsive properties of synthetic polymers. Here we show that the crystallinity, flexibility, and chemical tunability of PIX can be exploited to encapsulate guest proteins with high loading efficiencies (up to 46% w/w). The electrostatic host-guest interactions enable reversible, pH-controlled uptake/release of guest proteins as well as the mutual stabilization of the host and the guest, thus creating a uniquely synergistic platform toward the development of functional biomaterials and the controlled delivery of biological macromolecules.

Wettability tunable metal organic framework functionalized high internal phase emulsion porous monoliths for fast solid-phase extraction and sensitive analysis of hydrophilic heterocyclic amines

Surface wettability greatly influences the adsorptive, catalytic, and diffuse performances of a porous material. To realize the improved adsorption performance to hydrophilic heterocyclic amines (HAs), polymeric high internal phase emulsions (polyHIPEs) that can be tuned from hydrophobic to hydrophilic is synthesized by facilely regulating the amount of metal organic frameworks (MOFs). The water contact angle of the MOFs and polyHIPEs hybrids (MOFs@polyHIPEs) decreases from 133° to 0° as the amount of amide-modified MOFs increases from 0% to 10%. The hydrophilization of divinybenzene (DVB) based polyHIPEs by MOFs hybridization significantly enhances their adsorption performance and enables them to be suitable for the solid phase extraction (SPE) of hydrophilic HAs. Under the optimized conditions, the MOFs@polyHIPEs achieve adsorption capacities ranging from 42.89 to 86.71 µg/g for HAs through the π-π interaction and hydrogen bonding. The adsorption follows the pseudo-second-order kinetic model, and the nitrogen atoms in/on the imidazole ring are identified as the active adsorption sites for hydrogen bonding. This SPE method, along with HPLC-MS detection, provides detection limits of HAs as low as 0.00020-0.00040 ng/mL. This work offers a feasible strategy in tuning the surface wettability of polyHIPEs without post-modification to achieve high-efficiency enrichment and analysis of HAs.

Biomimetic Metal-Organic Frameworks as Targeted Vehicles to Enhance Osteogenesis

Although engineered nanoparticles loaded with specific growth factors are used to regulate differentiation of stem cells, the low loading efficiency and biocompatibility are still great challenges in tissue repair. A nature-inspired biomimetic delivery system with targeted functions is attractive for enhancing cell activity and controlling cell fate. Herein, a stem cell membrane (SCM)-wrapped dexamethasone (DEX)-loaded zeolitic imidazolate framework-8 (ZIF-8) is constructed, which integrates the synthetic nanomaterials with native plasma membrane, to achieve efficient DEX delivery and DEX-mediated bone repair. The DEX@ZIF-8-SCM enables high DEX loading capacity, modulates the sustained release, and facilitates the specific uptake of mesenchymal stem cells (MSCs), owing to the porous property of ZIF-8 and the innate targeting capability of SCM. The endocytosed DEX@ZIF-8-SCM shows high cytocompatibility and greatly enhances the osteogenic differentiation of MSCs. Furthermore, RNA-sequencing data reveal that the phosphoinositide 3-kinase (PI3K)-Akt signaling pathways are activated and dominantly involved in the accelerated osteogenesis. In the bone defect model, the administrated DEX@ZIF-8-SCM exerts excellent biocompatibility and effectively promotes bone regeneration. Overall, the SCM-derived biomimetic nanoplatform achieves targeted delivery, excellent biosafety, and enhanced osteogenic differentiation and bone repair, which provides a new and valid strategy for treating various tissue injuries.

A Comprehensive Review on the Use of Metal–Organic Frameworks (MOFs) Coupled with Enzymes as Biosensors

Several studies have shown the development of electrochemical biosensors based on enzymes immobilized in metal–organic frameworks (MOFs). Although enzymes have unique properties, such as efficiency, selectivity, and environmental sustainability, when immobilized, these properties are improved, presenting significant potential for several biotechnological applications. Using MOFs as matrices for enzyme immobilization has been considered a promising strategy due to their many advantages compared to other supporting materials, such as larger surface areas, higher porosity rates, and better stability. Biosensors are analytical tools that use a bioactive element and a transducer for the detection/quantification of biochemical substances in the most varied applications and areas, in particular, food, agriculture, pharmaceutical, and medical. This review will present novel insights on the construction of biosensors with materials based on MOFs. Herein, we have been highlighted the use of MOF for biosensing for biomedical, food safety, and environmental monitoring areas. Additionally, different methods by which immobilizations are performed in MOFs and their main advantages and disadvantages are presented.

Visual naked-eye detection of SARS-CoV-2 RNA based on covalent organic framework capsules

The ongoing outbreak of coronavirus disease 2019 (COVID-19) caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has highlighted that new diagnosis technologies are crucial for controlling the spread of the disease. Especially in the resources-limit region, conveniently operated detection methods such as "naked-eye" detection are urgently required that no instrument is needed. Herein, we have designed a novel and facile strategy to fabricate covalent organic framework (COF) capsules, which can be utilized to establish a new colorimetric assay for naked-eye detection of SARS-CoV-2 RNA. Specifically, we employ the digestible ZIF-90 as the sacrificial template to prepare the hollow COF capsules for horseradish peroxidase (HRP) encapsulation. The fabricated COF capsules can provide an appropriate microenvironment for the enzyme molecules, which may improve the conformational freedom of enzymes, enhance the mass transfer, and endow the enzyme with high environmental resistance. With such design, the proposed assay exhibits outstanding analytical performance for the detection of SARS-CoV-2 RNA in the linear range from 5 pM to 50 nM with a detection limit of 0.28 pM which can go parallel to qTR-PCR analysis. Our method also possesses excellent selectivity and reproducibility. Moreover, this method can also be served to analyze the clinical samples, and can successfully differentiate COVID-19 patients from healthy people, suggesting the promising potential in clinical diagnosis.

Recent development of metal-organic framework nanocomposites for biomedical applications

Albeit metal-organic framework (MOF) composites have been extensively explored, reducing the size and dimensions of various contents within the composition, to the nanoscale regime, has recently presented unique opportunities for enhanced properties with the formation of MOF-based nanocomposites. Many distinctive strategies have been used to fabricate these nanocomposites such as through the introduction of nanoparticles (NPs) into a MOF precursor solution or vice versa to achieve a core-shell or heterostructure configuration. As such, MOF-based nanocomposites offer seemingly limitless possibilities and promising solutions for the vast range of applications across biomedical disciplines especially for improving in vivo implementation. In this review, we focus on the recent development of MOF-based nanocomposites, outline their classification according to the type of integrations (NPs, coating materials, and different MOF-derived nanocomposites), and direct special attention towards the various approaches and strategies employed to construct these nanocomposites for their prospective utilization in biomedical applications including biomimetic enzymes and photo, chemo, sonodynamic, starvation and hyperthermia therapies. Lastly, our work aims to highlight the exciting potential as well as the challenges of MOF-based nanocomposites to help guide future research as well as to contribute to the progress of MOF-based nanotechnology in biomedicine.

Polymers as Encapsulating Agents and Delivery Vehicles of Enzymes

Enzymes are versatile biomolecules with broad applications. Since they are biological molecules, they can be easily destabilized when placed in adverse environmental conditions, such as variations in temperature, pH, or ionic strength. In this sense, the use of protective structures, as polymeric capsules, has been an excellent approach to maintain the catalytic stability of enzymes during their application. Thus, in this review, we report the use of polymeric materials as enzyme encapsulation agents, recent technological developments related to this subject, and characterization methodologies and possible applications of the formed bioactive structures. Our search detected that the most explored methods for enzyme encapsulation are ionotropic gelation, spray drying, freeze-drying, nanoprecipitation, and electrospinning. α-chymotrypsin, lysozyme, and β-galactosidase were the most used enzymes in encapsulations, with chitosan and sodium alginate being the main polymers. Furthermore, most studies reported high encapsulation efficiency, enzyme activity maintenance, and stability improvement at pH, temperature, and storage. Therefore, the information presented here shows a direction for the development of encapsulation systems capable of stabilizing different enzymes and obtaining better performance during application.

Pickering-Droplet-Derived MOF Microreactors for Continuous-Flow Biocatalysis with Size Selectivity

Enzymatic microarchitectures with spatially controlled reactivity, engineered molecular sieving ability, favorable interior environment, and industrial productivity show great potential in synthetic protocellular systems and practical biotechnology, but their construction remains a significant challenge. Here, we proposed a Pickering emulsion interface-directed synthesis method to fabricate such a microreactor, in which a robust and defect-free MOF layer was grown around silica emulsifier stabilized droplet surfaces. The compartmentalized interior droplets can provide a biomimetic microenvironment to host free enzymes, while the outer MOF layer secludes active species from the surroundings and endows the microreactor with size-selective permeability. Impressively, the thus-designed enzymatic microreactor exhibited excellent size selectivity and long-term stability, as demonstrated by a 1000 h continuous-flow reaction, while affording completely equal enantioselectivities to the free enzyme counterpart. Moreover, the catalytic efficiency of such enzymatic microreactors was conveniently regulated through engineering of the type or thickness of the outer MOF layer or interior environments for the enzymes, highlighting their superior customized specialties. This study provides new opportunities in designing MOF-based artificial cellular microreactors for practical applications.

Metal-Organic Framework-Based Hierarchically Porous Materials: Synthesis and Applications

Metal-organic frameworks (MOFs) have been widely recognized as one of the most fascinating classes of materials from science and engineering perspectives, benefiting from their high porosity and well-defined and tailored structures and components at the atomic level. Although their intrinsic micropores endow size-selective capability and high surface area, etc., the narrow pores limit their applications toward diffusion-control and large-size species involved processes. In recent years, the construction of hierarchically porous MOFs (HP-MOFs), MOF-based hierarchically porous composites, and MOF-based hierarchically porous derivatives has captured widespread interest to extend the applications of conventional MOF-based materials. In this Review, the recent advances in the design, synthesis, and functional applications of MOF-based hierarchically porous materials are summarized. Their structural characters toward various applications, including catalysis, gas storage and separation, air filtration, sewage treatment, sensing and energy storage, have been demonstrated with typical reports. The comparison of HP-MOFs with traditional porous materials (e.g., zeolite, porous silica, carbons, metal oxides, and polymers), subsisting challenges, as well as future directions in this research field, are also indicated.

Surface molecularly imprinted magnetic MOFs: A novel platform coupled with magneto electrode for high throughput electrochemical sensing analysis of oxytetracycline in foods

In order to solve inherent problems of traditional molecularly imprinted electrochemical sensors (MIECS), a novel platform of surface molecularly imprinted magnetic metal-organic frameworks (mMOFs@MIPs) was coupled with magneto electrode to establish magnetic MIECS for the recognition of oxytetracycline (OTC). mMOFs@MIPs were synthesized using layer-by-layer modification method for the recognition of OTC. With the help of magneto electrodes, mMOFs@MIPs can be magnetically modified on the electrode surface, forming the electrochemical sensing interface. The imprinted cavities of mMOFs@MIPs can act as the electron channel of the probe to realize label-free detection of OTC. A linear response was obtained within the OTC concentration range of 1.0 × 10^-9 g mL^-1-1.0 × 10^-4 g mL^-1. The applicability of the sensor was estimated using the spiking and recovery method in milk samples with the recoveries ranging from 89.0% to 103.1%. It has potential applications in food safety analysis with high throughput detection capability, high specificity and good stability.

Lipase Immobilization on Macroporous ZIF-8 for Enhanced Enzymatic Biodiesel Production

Immobilization of enzyme on metal-organic frameworks (MOFs) has drawn increasing interest owing to their many well-recognized characteristics. However, the pore sizes of MOFs (mostly micropores and mesopores) limit their application for enzyme immobilization to a great extent owing to the large size of enzyme molecules. Synthesis of MOFs with macropores would therefore solve this problem, typically encountered with conventional MOFs. In this work, macroporous zeolitic imidazolate frameworks (ZIF-8), referred to as M-ZIF-8, were synthesized and used for immobilization of Aspergillus niger lipase (ANL). Immobilization efficiency using M-ZIF-8 and enzymatic catalytic performance for biodiesel preparation were investigated. The immobilized ANL on M-ZIF-8 (ANL@M-ZIF-8) showed higher enzymatic activity (6.5-fold), activity recovery (3.8-fold), thermal stability (1.4- and 3.4-fold at 80 and 100 °C, respectively), reusability (after five cycles, 68% of initial activity was maintained), and porosity than ANL on conventional ZIF-8 (ANL/ZIF-8). In addition, by using ANL@M-ZIF-8 for catalyzing a biodiesel production reaction, a higher fatty acid methyl ester yield was achieved.

Selective adsorption and separation of stevioside and rebaudioside A by a metal-organic framework with boronic acid

The boronic acid functionalization metal-organic frameworks (MOFs), as unique boronate affinity adsorbents, have desired specific molecular affinity for the separation and enrichment of cis-diol-compounds. Herein, the boronic acid functionalized Zn-based MOF adsorbent (MOF-BA) was synthesized through a simple one-step microwave method and used for the recognition and isolation of steviol glycosides (SGs). This MOF-BA exhibits the same spherical structure and isostructure with the parent framework composed only of the primitive ligand as verified by SEM and XRD characterization. It was confirmed that changing the ratio of ligands could achieve the adjustability of the boron content in the framework. At the same time, the MOF-BA-1.0 showed a suitable pore size (4.69 nm), and the presence of boric acid functional groups showed favorable selectivity for stevioside (STV). The static adsorption results showed that adsorption performances of rebaudioside A (RA) and STV from crude sugar solution (5.0 mg mL−1, pH 8) on MOF-BA-1.0 were investigated at 303 K for 15 h. The adsorption capacities for STV and RA were 42.93 mg g−1 and 22.96 mg g−1, respectively, and the adsorption selectivity (αSTV/RA) reached 4.35. The adsorption isotherm and kinetic data of MOF-BA-1.0 for RA and STV obeyed the Langmuir isotherm model and pseudo second order kinetic model, respectively. The study demonstrated that MOF-BA-1.0 adsorbent could be used as a potential adsorbent to purify the active ingredients of stevia and obtain a high concentration of RA products.

Pickering Emulsion-Based Microreactors for Size-Selective Interfacial Enzymatic Catalysis

In this study, we have developed a mild and effective method to prepare a metal-organic framework (MOF)-based microcapsule by the self-assembly of pre-synthesized zeolite imidazolate framework-8 (ZIF-8) nanoparticles at the oil-water interface combined with deposition of a dense ZIF-8 coating outside the capsule. By introducing the enzyme Candida antarctica lipase B (CalB) directly into the stabilizer ZIF-8 or the water phase of Pickering emulsion during the preparation process, we achieved that the enzyme was immobilized within the shell (CalB@ZIF-8@cap) or in the cavity (ZIF-8@cap-CalB) of the microcapsules, respectively. The resulting CalB-loaded microcapsules were robust and had a core-shell structure proved by scanning electron microscopy. Meanwhile, Fourier transform infrared spectroscopy was conducted to confirm the encapsulation of enzymes in the microcapsules and their position in the microcapsules was confirmed by fluorescence microscopy. Furthermore, through the comparison of transesterification reactions between a pair of small substrates and a pair of larger ones, the two types of CalB-loaded microcapsules showed great catalytic activity, stability and size selectivity, and the catalytic activity of CalB@ZIF-8@cap was slightly higher than that of ZIF-8@cap-CalB. Importantly, due to the large size of the microcapsules, the catalyst could be separated from the reaction system by sedimentation, thereby reducing the energy consumption for separation. These kinds of multifunctional MOF-enzyme composites may open up new opportunities for the biocatalysis and microreactor.

In situ assembled ZIF superstructures via an emulsion-free soft-templating approach

Assembling well-defined MOF superstructures remains challenging as it requires easily removable hard templates or readily available immiscible solutions for an emulsion-based soft-template approach. In this work, a single-step emulsion-free soft templating approach is reported to spontaneously prepare hollow ZIF-8 and ZIF-67 colloidosomes with no further purification. These superstructures can load different enzymes regardless of the size and charge with a high encapsulation efficiency of 99%. We envisage that this work will expand the repertoires of MOF superstructures by the judicious selection of precursors and the reaction medium.

Facile Synthesis of Enzyme-Embedded Metal-Organic Frameworks for Size-Selective Biocatalysis in Organic Solvent

In situ immobilization of enzyme into metal-organic frameworks (MOFs) is performed through a one-step and facile method. Candida antarctica lipase B (CalB) is directly embedded in zeolitic imidazolate framework (ZIF)-8 by simply mixing an aqueous solution of 2-methylimidazole and zinc nitrate hexahydrate [Zn(NO₃)₂⋅6H₂O] containing CalB at room temperature. Due to the intrinsic micropores of ZIF-8, the obtained CalB@ZIF composite is successfully applied in size-selective transesterification reaction in organic solvent. CalB@ZIF not only shows much higher catalytic activity but also exhibits higher thermal stability than free CalB. Besides, the robust ZIF-8 shell also offers the hybrid composites excellent reusability.

Metal-Organic Frameworks: A Potential Platform for Enzyme Immobilization and Related Applications

Enzymes, as natural catalysts with remarkable catalytic activity and high region-selectivities, hold great promise in industrial catalysis. However, applications of enzymatic transformation are hampered by the fragility of enzymes in harsh conditions. Recently, metal-organic frameworks (MOFs), due to their high stability and available structural properties, have emerged as a promising platform for enzyme immobilization. Synthetic strategies of enzyme-MOF composites mainly including surface immobilization, covalent linkage, pore entrapment and in situ synthesis. Compared with free enzymes, most immobilized enzymes exhibit enhanced resistance against solvents and high temperatures. Besides, MOFs serving as matrixes for enzyme immobilization show extraordinary superiority in many aspects compared with other supporting materials. The advantages of using MOFs to support enzymes are discussed. To obtain a high enzyme loading capacity and to reduce the diffusion resistance of reactants and products during the reaction, the mesoporous MOFs have been designed and constructed. This review also covers the applications of enzyme-MOF composites in bio-sensing and detection, bio-catalysis, and cancer therapy, which is concerned with interdisciplinary nano-chemistry, material science and medical chemistry. Finally, some perspectives on reservation or enhancement of bio-catalytic activity of enzyme-MOF composites and the future of enzyme immobilization strategies are discussed.

Metal-Organic Frameworks: A New Platform for Enzyme Immobilization

Metal-organic frameworks (MOFs) with attractive properties such as high surface area, tunable porosity, designable functionality and excellent stability, have aroused great interest from researchers as the matrices for enzyme immobilization. Recently, several efficient strategies including surface immobilization, post-synthetic infiltration and in situ encapsulation have been explored. MOF-immobilized enzymes, named enzymes@MOFs, show remarkably enhanced stability and recyclability, accelerating cell-free biocatalysis in diverse applications. This concept will impart the typical strategies for enzyme immobilization with MOFs, and their potential applications.

Encapsulating soluble active species into hollow crystalline porous capsules beyond integration of homogeneous and heterogeneous catalysis

Homogeneous molecular catalysts and heterogeneous catalysts possess complementary strengths, and are of great importance in laboratory/commercial procedures. While various porous hosts, such as polymers, carbons, silica, metal oxides and zeolites, have been used in an attempt to heterogenize homogeneous catalysts, realizing the integration of both functions at the expense of discounting their respective advantages, it remains a significant challenge to truly combine their intrinsic strengths in a single catalyst without compromise. Here, we describe a general template-assisted approach to incorporating soluble molecular catalysts into the hollow porous capsule, which prevents their leaching due to the absence of large intergranular space. In the resultant yolk (soluble)-shell (crystalline) capsules, the soluble yolks can perform their intrinsic activity in a mimetic homogeneous environment, and the crystalline porous shells endow the former with selective permeability, substrate enrichment, size-selective and heterogeneous cascade catalysis, beyond the integration of the respective advantages of homogeneous and heterogeneous catalysts.

Hydrophobic pore space constituted in macroporous ZIF-8 for lipase immobilization greatly improving lipase catalytic performance in biodiesel preparation

BACKGROUND

During lipase-mediated biodiesel production, by-product glycerol adsorbing on immobilized lipase is a common trouble that hinders enzymatic catalytic activity in biodiesel production process. In this work, we built a hydrophobic pore space in macroporous ZIF-8 (named as M-ZIF-8) to accommodate lipase so that the generated glycerol would be hard to be adsorbed in such hydrophobic environment. The performance of the immobilized lipase in biodiesel production as well as its characteristics for glycerol adsorption were systematically studied. The PDMS (polydimethylsiloxane) CVD (chemical vapor deposition) method was utilized to get hydrophobic M-ZIF-8-PDMS with hydrophobic macropore space and then ANL (Aspergillus niger lipase) was immobilized on M-ZIF-8 and M-ZIF-8-PDMS by diffusion into the macropores.

RESULTS

ANL@M-ZIF-8-PDMS presented higher enzymatic activity recovery and better biodiesel production catalytic performance compared to ANL@M-ZIF-8. Further study revealed that less glycerol adsorption was observed through the hydrophobic modification, which may attribute to the improved immobilized lipase performance during biodiesel production and ANL@M-ZIF-8-PDMS remained more than 96% activity after five cycles' reuse. Through secondary structure and kinetic parameters' analysis, we found that ANL@M-ZIF-8-PDMS had lower extent of protein aggregation and twice catalytic efficiency (V _max/K _m) than ANL@M-ZIF-8.

CONCLUSIONS

Hydrophobic pore space constituted in macroporous ZIF-8 for lipase immobilization greatly improved lipase catalytic performance in biodiesel preparation. The hydrophobic modification time showed negligible influence on the reusability of the immobilized lipase. This work broadened the prospect of immobilization of enzyme on MOFs with some inspiration.

Confinement of Candida Antarctica Lipase B in a Multifunctional Cyclodextrin-Derived Silicified Hydrogel and Its Application as Enzymatic Nanoreactor

Supramolecular hydrogels with a three-dimensional cross-linked macromolecular network have attracted growing scientific interest in recent years because of their ability to incorporate high loadings of bioactive molecules such as drugs, proteins, antibodies, peptides, and genes. Herein, we report a versatile approach for the confinement of Candida antarctica lipase B (CALB) within a silica-strengthened cyclodextrin-derived supramolecular hydrogel and demonstrate its potential application in the selective oxidation of 2,5-diformylfuran (DFF) to 2,5-furandicarboxylic acid (FDCA) under mild conditions. The enzymatic nanoreactor was deeply characterized using thermogravimetric analysis, Fourier transform infrared spectroscopy, N₂-adsorption, dynamic light scattering, UV-visible spectroscopy, transmission electron microscopy, scanning electron microscopy, and confocal laser scanning microscopy, while the reaction products were established on the basis of ¹H nuclear magnetic resonance spectroscopy combined with high-performance liquid chromatography. Our results revealed that while CALB immobilized in conventional sol-gel silica yielded exclusively 5-formylfuran-2-carboxylic acid (FFCA), confinement of the enzyme in the silicified hydrogel imparted a 5-fold increase in DFF conversion and afforded 67% FDCA yield in 7 h and almost quantitative yields in less than 24 h. The hierarchically interconnected pore structure of the host matrix was found to provide a readily accessible diffusion path for reactants and products, while its flexible hydrophilic-hydrophobic interface was extremely beneficial for the interfacial activation of the immobilized lipase.

Hollow zeolite microspheres as a nest for enzymes: a new route to hybrid heterogeneous catalysts

In the field of heterogeneous catalysis, the successful integration of enzymes and inorganic catalysts could pave the way to multifunctional materials which are able to perform advanced cascade reactions. However, such combination is not straightforward, for example in the case of zeolite catalysts for which enzyme immobilization is restricted to the external surface. Herein, this challenge is overcome by developing a new kind of hybrid catalyst based on hollow zeolite microspheres obtained by the aerosol-assisted assembly of zeolite nanocrystals. The latter spheres possess open entry-ways for enzymes, which are then loaded and cross-linked to form cross-linked enzyme aggregates (CLEAs), securing their entrapment. This controlled design allows the combination of all the decisive features of the zeolite with a high enzyme loading. A chemo-enzymatic reaction is demonstrated, where the structured zeolite material is used both as a nest for the enzyme and as an efficient inorganic catalyst. Glucose oxidase (GOx) ensures the in situ production of H₂O₂ subsequently utilized by the TS-1 zeolite to catalyze the epoxidation of allylic alcohol toward glycidol. The strategy can also be used to entrap other enzymes or combination of enzymes, as demonstrated here with combi-CLEAs of horseradish peroxidase (HRP) and glucose oxidase. We anticipate that this strategy will open up new perspectives, leveraging on the spray-drying (aerosol) technique to shape microparticles from various nano-building blocks and on the entrapment of biological macromolecules to obtain new multifunctional hybrid microstructures.

Rapid mechanochemical encapsulation of biocatalysts into robust metal-organic frameworks

Metal–organic frameworks (MOFs) have recently garnered consideration as an attractive solid substrate because the highly tunable MOF framework can not only serve as an inert host but also enhance the selectivity, stability, and/or activity of the enzymes. Herein, we demonstrate the advantages of using a mechanochemical strategy to encapsulate enzymes into robust MOFs. A range of enzymes, namely β-glucosidase, invertase, β-galactosidase, and catalase, are encapsulated in ZIF-8, UiO-66-NH₂, or Zn-MOF-74 via a ball milling process. The solid-state mechanochemical strategy is rapid and minimizes the use of organic solvents and strong acids during synthesis, allowing the encapsulation of enzymes into three prototypical robust MOFs while maintaining enzymatic biological activity. The activity of encapsulated enzyme is demonstrated and shows increased resistance to proteases, even under acidic conditions. This work represents a step toward the creation of a suite of biomolecule-in-MOF composites for application in a variety of industrial processes.

Metal–organic frameworks (MOFs) are attractive for encapsulating enzymes for industrial purposes because they can increase selectivity, stability, and/or activity of the enzymes. Here, the authors developed an economical solid-state mechanochemical method to encapsulate enzymes during MOF synthesis.

Electrostatic Interaction-Induced Formation of Enzyme-on-MOF as Chemo-Biocatalyst for Cascade Reaction with Unexpectedly Acid-Stable Catalytic Performance

Combining biocatalytic and chemocatalytic reactions in a one-pot reaction not only avoids the tedious isolation of intermediates during the reactions but also provides a desirable alternative to extend the range of catalytic reactions. Here, we report a facile strategy to immobilize an enzyme, glucose oxidase (GOx), on PCN-222(Fe) induced by electrostatic interaction in which PCN-222(Fe) serves as both a support and chemocatalyst. The immobilization was confirmed through ζ potential measurement, confocal laser scanning microscopy, Fourier transform infrared spectrometry, and UV-vis spectroscopy. This chemo-biocatalyst was applied to a cascade reaction to catalyze glucose oxidation and ABTS (ABTS = 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (or pyrogallol) oxidation. The catalytic kinetics studies show that these chemo-biocatalytic cascade reactions obey the Michaelis-Menten equation, which indicates that the cascade reactions follow the typical enzymatic dynamic regulation process. Interestingly, GOx/PCN-222(Fe) exhibits an exceptional acid-stable catalytic performance as evidenced by circular dichroism spectroscopy where no significant structure change was observed toward acidic solutions with different pH values. GOx/PCN-222(Fe) also displays desirable recyclability since no significant loss of conversion rates was found after six repeated reactions. This work presents a convenient strategy to construct metal-organic framework based chemo-biocatalysts, which may find potential applications in sensing and nanomachines.

Hierarchical Micro- and Mesoporous Zn-Based Metal-Organic Frameworks Templated by Hydrogels: Their Use for Enzyme Immobilization and Catalysis of Knoevenagel Reaction

Encapsulation of enzymes in metal-organic frameworks (MOFs) is often obstructed by the small size of the orifices typical of most reported MOFs, which prevent the passage of larger-size enzymes. Here, the preparation of hierarchical micro- and mesoporous Zn-based MOFs via the templated emulsification method using hydrogels as a template is presented. Zinc-based hydrogels featuring a 3D interconnecting network are first produced via the formation of hydrogen bonds between melamine and salicylic acid in which zinc ions are well distributed. Further coordination with organic linkers followed by the removal of the hydrogel template produces hierarchical Zn-based MOFs containing both micropores and mesopores. These new MOFs are used for the encapsulation of glucose oxidase and horseradish peroxidase to prove the concept. The immobilized enzymes exhibit a remarkably enhanced increased operational stability and enzymatic activity with a k_cat /k_m value of 85.68 mm s^-1 . This value is 7.7-fold higher compared to that found for the free enzymes in solution, and 2.7-fold higher than enzymes adsorbed on conventional microporous MOFs. The much higher catalytic activity of the mesoporous conjugate for Knoevenagel reactions is demonstrated, since the large pores enable easier access to the active sites, and compared with that observed for catalysis using microporous MOFs.

Enhancing microperoxidase activity and selectivity: immobilization in metal-organic frameworks

Microperoxidases 8 (MP8) and 11 (MP11) are heme-containing peptides obtained by the proteolytic digestion of Cytochrome c. They act as mini-enzymes that combine both peroxidase-like and Cytochrome P450-like activities that may be useful in the synthesis of fine chemicals or in the degradation of environmental pollutants. However, their use is limited by their instability in solution due to (i) the bleaching of the heme in the presence of an excess of H2O2, (ii) the decoordination of the distal histidine ligand of the iron under acidic conditions and, (iii) their tendency to aggregate in aqueous alkaline solutions, even at low concentrations. Additionally, both MP8 and MP11 show relatively low selectivity, due to the lack of control of the substrates by a specific catalytic pocket on the distal face of the heme. Both stability and selectivity issues can be effectively addressed by immobilization of microperoxidases in solid matrices, which can also lead to their possible recycling from the reaction medium. Considering their relatively small size, the pore inclusion of MPs into Metal-Organic Frameworks appeared to be more adequate compared to other immobilization methods that have been widely investigated for decades. The present minireview describes the catalytic activities of MP8 and MP11, their limitations, and various results describing their immobilization into MOFs which led to MP11- or MP8@MOF hybrid materials that display good activity in the oxidation of dyes and phenol derivatives, with remarkable recyclability due to the stabilization of the MPs inside the MOF cavities. An example of selective oxidation of dyes according to their charge by MP8@MOF hybrid materials is also highlighted.

Laccase Encapsulation in ZIF-8 Metal-Organic Framework Shows Stability Enhancement and Substrate Selectivity

CgL1 laccase from Corynebacterium glutamicum was encapsulated into the metal-organic framework (MOF) ZIF-8 which was synthesized in a rapid enzyme friendly aqueous synthesis, the fastest in situ encapsulation of laccases reported to date. The obtained enzyme/MOF, i. e. laccase@ZIF-8 composite showed enhanced thermal (up to 70 °C) and chemical (N,N-dimethylformamide) stability, resulting in a stable heterogenous catalyst, suitable for high temperature reactions in organic solvents. Furthermore, the defined structure of ZIF-8 produced a size selective substrate specificity, so that substrates larger than the pore size were not accepted. Thereby, 2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) was used to verify that the enzyme is immobilized inside the MOF versus the outside surface. The enzyme@MOF composite was analyzed by atomic absorption spectroscopy (ASS) to precisely determine the enzyme loading to 2.1 wt%.