Target DNA induced switches of DNA polymerase activity

DNA-Mediated Control of Protein Function in Semi-Synthetic Systems

The development of strategies for controlling protein function in a precise and predictable manner has the potential to revolutionize catalysis, diagnostics, and medicine. In this regard, the use of DNA has emerged as a powerful approach for modulating protein activity. The programmable nature of DNA allows for constructing sophisticated architectures wherein proteins can be placed with control over position, orientation, and stoichiometry. This ability is especially useful considering that the properties of proteins can be influenced by their local environment or their proximity to other functional molecules. Here, we chronicle the different strategies that have been developed to interface DNA with proteins in semi-synthetic systems. We further delineate the unique applications unlocked by the unprecedented level of structural control that DNA affords. We end by outlining outstanding challenges in the area and discuss future research directions towards potential solutions.

Paper-Based Biosensors for the Detection of Nucleic Acids from Pathogens

Paper-based biosensors are microfluidic analytical devices used for the detection of biochemical substances. The unique properties of paper-based biosensors, including low cost, portability, disposability, and ease of use, make them an excellent tool for point-of-care testing. Among all analyte detection methods, nucleic acid-based pathogen detection offers versatility due to the ease of nucleic acid synthesis. In a point-of-care testing context, the combination of nucleic acid detection and a paper-based platform allows for accurate detection. This review offers an overview of contemporary paper-based biosensors for detecting nucleic acids from pathogens. The methods and limitations of implementing an integrated portable paper-based platform are discussed. The review concludes with potential directions for future research in the development of paper-based biosensors.

Lead-start isothermal polymerase amplification controlled by DNAzymatic switches

As DNA polymerases are even active at ambient temperature, there is inevitable non-specific amplification; to avoid the undesired amplification of analytes, a heat activation-based polymerase chain reaction (PCR), called hot-start PCR, is widely used to be highly precise and quantitative in detection. Unlike thermocycling amplification, isothermal amplification, compatible for point-of-care (PoC) tests, cannot be benefited by the heat-activation technique, making the method qualitative rather than quantitative. In this work, we newly developed a lead ion (Pb²⁺) activation technique, called lead-start isothermal amplification, allowing on-demand activation or deactivation of DNA polymerases at room temperature. We systematically correlated the DNA polymerase inhibition by the TQ30 aptamer with Pb²⁺-responsive strand cleavage by the GR5 DNAzyme, and relying on the type of interconnectors, Pb²⁺ successfully served as an initiator or a terminator of isothermal DNA amplification. Our lead-start isothermal amplification was exceptionally Pb²⁺-specific, dramatically increasing the enzymatic activity of DNA polymerase (>25 times) only by Pb²⁺ introduction. Despite one-by-one sample preparation, a number of reactions can begin and end at the same time, sharing the identical amplification conditions, and thereby allowing their quantitative analysis and comparison. Using a portable UV lamp and a smartphone camera, we also succeeded in quantifying the amounts of clinically important and human papillomavirus type 16 genes in human serum and SARS-CoV-2's nucleocapsid genes in human serum and saliva, and the limit of detection was as low as 0.1 nM, highly applicable for actual PoC tests in the field with no purification process.

Swelling of Serum-Stable DNA Nanoparticles upon Target-Induced Conformational Rearrangement of Sensing Probes for the Signal-On Detection of Cancer-Related Genes

Nuclease-resistant assay probes are of significant importance for biochemical analysis and disease diagnosis. In this contribution, a reconfigurable lipidic moiety-attached DNA nanoparticle (LDN) is constructed from a cholesterol-conjugated multifunctional hairpin-type DNA probe (Chol-DP) by hydrophobicity-mediated self-assembly. The LDN holds high serum stability and displays a low false-positive signal even in a complex biological milieu. The hydrophobic cholesterol moiety enables the hydrophobicity-mediated assembly, while hydrophilic DNA sequence serves as a recognition element and a polymerization template. The initiator-activated strand displacement amplification (SDA) reaction can convert the hairpin-shaped probe into rigid double-stranded DNA (dsDNA), causing the conformational rearrangement-based LDN swelling that can be used to reliably and fluorescently signal the cancer-related p53 gene. The size increase and structural reconfiguration are confirmed by dynamic light scattering (DLS) analysis and confocal microscopy imaging, respectively. Target p53 is specifically detected down to 10 pM. The whole assay process involved only several simple mixing steps. Recovery test and blind test further confirm the feasibility of the use of the LDN for the detection of target DNA in a complex biological milieu, indicating a promising nanotool for biomedical applications.

Development of Integrated Systems for On-Site Infection Detection

The modern healthcare system faces an unrelenting threat from microorganisms, as evidenced by global outbreaks of new viral diseases, emerging antimicrobial resistance, and the rising incidence of healthcare-associated infections (HAIs). An effective response to these threats requires rapid and accurate diagnostic tests that can identify causative pathogens at the point of care (POC). Such tests could eliminate diagnostic uncertainties, facilitating patient triaging, minimizing the empiric use of antimicrobial drugs, and enabling targeted treatments. Current standard methods, however, often fail to meet the needs of rapid diagnosis in POC settings. Culture-based assays entail long processing times and require specialized laboratory infrastructure; nucleic acid (NA) tests are often limited to centralized hospitals due to assay complexity and high costs. Here we discuss two new POC tests developed in our groups to enable the rapid diagnosis of infection. The first is nanoPCR that takes advantages of core-shell magnetoplasmonic nanoparticles (MPNs): (i) Au shell significantly accelerates thermocycling via volumetric, plasmonic light-to-heat conversion and (ii) a magnetic core enables sensitive in situ fluorescent detection via magnetic clearing. By adopting a Ferris wheel module, the system expedites multisamples in parallel with a minimal setup. When applied to COVID-19 diagnosis, nanoPCR detected SARS-CoV-2 RNA down to 3.2 copy/μL within 17 min. In particular, nanoPCR diagnostics accurately identified COVID-19 cases in clinical samples (n = 150), validating its clinical applicability. The second is a polarization anisotropy diagnostic (PAD) system that exploits the principle of fluorescence polarization (FP) as a detection modality. Fluorescent probes were designed to alter their molecular weight upon recognizing target NAs. This event modulates the probes' tumbling rate (Brownian motion), which leads to changes in FP. The approach is robust against environmental noise and benefits from the ratiometric nature of the signal readout. We applied PAD to detect clinically relevant HAI bacteria (Escherichia coli, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Staphylococcus aureus). The PAD assay demonstrated detection sensitivity down to the single bacterium level and determined both drug resistance and virulence status. In summary, these new tests have the potential to become powerful tools for rapid diagnosis in the infectious disease space. They do not require highly skilled personnel or labor-intensive analyses, and the assays are quick and cost-effective. These attributes will make nanoPCR and PAD well-aligned with a POC workflow to aid physicians to initiate prompt and informed patient treatment.

G-quadruplex-forming aptamer enhances the peroxidase activity of myoglobin against luminol

Aptamers can control the biological functions of enzymes, thereby facilitating the development of novel biosensors. While aptamers that inhibit catalytic reactions of enzymes were found and used as signal transducers to sense target molecules in biosensors, no aptamers that amplify enzymatic activity have been identified. In this study, we report G-quadruplex (G4)-forming DNA aptamers that upregulate the peroxidase activity in myoglobin specifically for luminol. Using in vitro selection, one G4-forming aptamer that enhanced chemiluminescence from luminol by myoglobin's peroxidase activity was discovered. Through our strategy—in silico maturation, which is a genetic algorithm-aided sequence manipulation method, the enhancing activity of the aptamer was improved by introducing mutations to the aptamer sequences. The best aptamer conserved the parallel G4 property with over 300-times higher luminol chemiluminescence from peroxidase activity more than myoglobin alone at an optimal pH of 5.0. Furthermore, using hemin and hemin-binding aptamers, we demonstrated that the binding property of the G4 aptamers to heme in myoglobin might be necessary to exert the enhancing effect. Structure determination for one of the aptamers revealed a parallel-type G4 structure with propeller-like loops, which might be useful for a rational design of aptasensors utilizing the G4 aptamer-myoglobin pair.

Graphene biosensors for bacterial and viral pathogens

The infection and spread of pathogens (e.g., COVID-19) pose an enormous threat to the safety of human beings and animals all over the world. The rapid and accurate monitoring and determination of pathogens are of great significance to clinical diagnosis, food safety and environmental evaluation. In recent years, with the evolution of nanotechnology, nano-sized graphene and graphene derivatives have been frequently introduced into the construction of biosensors due to their unique physicochemical properties and biocompatibility. The combination of biomolecules with specific recognition capabilities and graphene materials provides a promising strategy to construct more stable and sensitive biosensors for the detection of pathogens. This review tracks the development of graphene biosensors for the detection of bacterial and viral pathogens, mainly including the preparation of graphene biosensors and their working mechanism. The challenges involved in this field have been discussed, and the perspective for further development has been put forward, aiming to promote the development of pathogens sensing and the contribution to epidemic prevention.

Switching the activity of Taq polymerase using clamp-like triplex aptamer structure

In nature, allostery is the principal approach for regulating cellular processes and pathways. Inspired by nature, structure-switching aptamer-based nanodevices are widely used in artificial biotechnologies. However, the canonical aptamer structures in the nanodevices usually adopt a duplex form, which limits the flexibility and controllability. Here, a new regulating strategy based on a clamp-like triplex aptamer structure (CLTAS) was proposed for switching DNA polymerase activity via conformational changes. It was demonstrated that the polymerase activity could be regulated by either adjusting structure parameters or dynamic reactions including strand displacement or enzymatic digestion. Compared with the duplex aptamer structure, the CLTAS possesses programmability, excellent affinity and high discrimination efficiency. The CLTAS was successfully applied to distinguish single-base mismatches. The strategy expands the application scope of triplex structures and shows potential in biosensing and programmable nanomachines.

Aptamer-based regulation of transcription circuits

We propose synthetic DNA/RNA transcription circuits based on specific aptamer recognition. By mimicking transcription factor regulation, combined with specific enzyme/DNA aptamer binding, multiple biomolecules including DNA, RNA, polymerase, restriction enzymes and methylase were used as regulators. In addition, multi-level cascading networks and methylation-switch circuits were also established. This regulation strategy has the potential to expand the toolkit of in vitro synthetic biology.

Target-Activated DNA Polymerase Activity for Sensitive RNase H Activity Assay

Herein, the ribonuclease H (RNase H) activity assay based on the target-activated DNA polymerase activity is described. In this method, a detection probe composed of two functional sequences, a binding site for DNA polymerase and a catalytic substrate for RNase H, serves as a key component. The detection probe, at its initial state, suppresses the DNA polymerase activity, but it becomes destabilized by RNase H, which specifically hydrolyzes RNA in RNA/DNA hybrid duplexes. As a result, DNA polymerase recovers its activity and initiates multiple primer extension reactions in a separate TaqMan probe-based signal transduction module, leading to a significantly enhanced fluorescence "turn-on" signal. This assay can detect RNase H activity as low as 0.016 U mL^-1 under optimized conditions. Furthermore, its potential use for evaluating RNase H inhibitors, which have been considered potential therapeutic agents against acquired immune deficiency syndrome (AIDS), is successfully explored. In summary, this approach is quite promising for the sensitive and accurate determination of enzyme activity and inhibitor screening.

ESI-TOF MS analysis of complexes formed between quercetin and five metal ions in hot water and a study into their DNA cleavage activity

Quercetin is a flavonoid compound widely found in vegetables, fruits, and medicinal plants. It has carbonyl and phenolic hydroxyl groups in its structure that can easily form complexes with metal ions. In this study, we reacted quercetin in water at 95 °C with five metal trace elements commonly found in plants, namely calcium, magnesium, zinc, iron(III), and copper. Each supernatant was then examined by electrospray ionization-time-of-flight mass spectrometry (ESI-TOF MS). The results showed that quercetin can form complexes with Ca²⁺, Mg²⁺, Zn²⁺, and Cu²⁺ in ratios of 2:1, 3:1, and 3:2. Interestingly, after reaction with Fe³⁺ in water at 95 °C, not only can quercetin‑iron(III) complexes be formed in ratios of 2:1 and 3:1, but small amounts of quercetin‑iron(II) complexes can also be formed in the same ratios. Furthermore, DNA cleavage experiments showed that when acting alone, quercetin and Cu²⁺ have weak or no cleavage effects on DNA, but the complex formed after reaction in hot water cleaves DNA in a time- and concentration-dependent manner. These results indicate that complexes may form between quercetin and a variety of metal trace elements in a water decoction of plants, and that these metal complexes may be the material basis for the health-promoting and therapeutic effects of edible or medicinal plants.

Sensitive and specific detection of proteins based on target-responsive DNA polymerase activity

We herein describe a novel method for the detection of target protein based on the target-responsive DNA polymerase activity. In the sensor, two different types of DNA aptamers with the respective functions: one binds to the target protein and the other binds to DNA polymerase, are rationally engineered and combined to form the detection probe that regulates DNA polymerase activity in response to the target protein. In the presence of target protein, the detection probe becomes destabilized and stops the inhibition of DNA polymerase activity. Consequently, the active DNA polymerase initiates the primer extension reaction on the target-specific DNA aptamer, which recycles the target protein to promote another activation cycle of DNA polymerase. In addition, DNA polymerase also catalyzes the primer extension reaction on the primer/template complex in conjugation with TaqMan probe, leading to the significantly enhanced fluorescence intensities. With this novel strategy, we detected a model target protein, lysozyme with a limit of detection as low as 0.80 nM. In addition, the practical applicability of this system was successfully demonstrated by determining lysozyme in human serum.

A Personal Glucose Meter for Label-Free and Washing-Free Biomolecular Detection

We developed a label-free and washing-free method for biomolecular detection using a personal glucose meter (PGM). ATP was selected as a model target, and cascade enzymatic reactions promoted by hexokinase and pyruvate kinase were adopted to link the amount of ATP to glucose that is detectable by a hand-held PGM. In principle, the presence of target ATP enables hexokinase to catalyze the conversion of glucose to glucose 6-phosphate by providing a phosphate group to glucose, and thus the amount of glucose is decreased in proportion to the amount of ATP. In addition, adenosine 5'-diphosphate (ADP), which is generated after hexokinase-catalyzed enzymatic reaction, is recovered to ATP by a pyruvate kinase enzyme. The regenerated ATP is again supplemented to catalyze multiple rounds of cascade enzymatic reactions, leading to signal amplification. As a result, the change of glucose amount that is inversely proportional to ATP amount is simply measured by a hand-held PGM. By employing this strategy, we successfully determined ATP down to 49 nM with high selectivity even in real samples such as tap water, human serum, and bovine urine. Importantly, the developed system does not require expensive modification and washing steps but is conveniently operated with a commercially available PGM, which would pave the way for the development of a simple and cost-effective sensing platform.

Nucleic acid aptamer-based methods for diagnosis of infections

Infectious diseases are a serious global problem, which not only take an enormous human toll but also incur tremendous economic losses. In combating infectious diseases, rapid and accurate diagnostic tests are required for pathogen identification at the point of care (POC). In this review, investigations of diagnostic strategies for infectious diseases that are based on aptamers, especially nucleic acid aptamers, oligonucleotides that have high affinities and specificities toward their targets, are described. Owing to their unique features including low cost of production, easy chemical modification, high chemical stability, reproducibility, and low levels of immunogenicity and toxicity, aptamers have been widely utilized as bio-recognition elements (bio-receptors) for the development of infection diagnostic systems. We discuss nucleic acid aptamer-based methods that have been developed for diagnosis of infections using a format that organizes discussion according to the target pathogenic analytes including toxins or proteins, whole cells and nucleic acids. Also included is, a summary of recent advances made in the sensitive detection of pathogenic bacteria utilizing the isothermal nucleic acid amplification method. Lastly, a nucleic acid aptamer-based POC system is described and future directions of studies in this area are discussed.

Universal, colorimetric microRNA detection strategy based on target-catalyzed toehold-mediated strand displacement reaction

In this work, we developed a novel, label-free, and enzyme-free strategy for the colorimetric detection of microRNA (miRNA), which relies on a target-catalyzed toehold-mediated strand displacement (TMSD) reaction. The system employs a detection probe that specifically binds to the target miRNA and sequentially releases a catalyst strand (CS) intended to trigger the subsequent TMSD reaction. Thus, the presence of target miRNA releases the CS that mediates the formation of an active G-quadruplex DNAzyme which is initially caged and inactivated by a blocker strand. In addition, a fuel strand that is supplemented for the recycling of the CS promotes another TMSD reaction, consequently generating a large number of active G-quadruplex DNAzymes. As a result, a distinct colorimetric signal is produced by the ABTS oxidation promoted by the peroxidase mimicking activity of the released G-quadruplex DNAzymes. Based on this novel strategy, we successfully detected miR-141, a promising biomarker for human prostate cancer, with high selectivity. The diagnostic capability of this system was also demonstrated by reliably determining target miR-141 in human serum, showing its great potential towards real clinical applications. Importantly, the proposed approach is composed of separate target recognition and signal transduction modules. Thus, it could be extended to analyze different target miRNAs by simply redesigning the detection probe while keeping the same signal transduction module as a universal signal amplification unit, which was successfully demonstrated by analyzing another target miRNA, let-7d.

Binding-responsive catalysis of Taq DNA polymerase for the sensitive and selective detection of cell-surface proteins

Here we develop a new method for the sensitive and selective detection of cell-surface proteins with an aptamer probe designed for binding-responsive catalysis of Taq DNA polymerase. Taking the biotin receptor as a model, the method allows the detection of target protein on surfaces of different types of cancer cells.

Rapid and label-free strategy for the sensitive detection of Hg2+ based on target-triggered exponential strand displacement amplification

A rapid and label-free strategy for sensitive detection of Hg²⁺ is developed based on target-triggered exponential strand displacement amplification (eSDA).

Highly Sensitive Protein Detection Based on Smart Hybrid Nanocomposite-Controlled Switch of DNA Polymerase Activity

In this work, we have successfully designed a smart and flexible signal amplification method based on a newly synthesized hybrid nanocomposite with switchable enzyme activity for specific and sensitive protein detection. The smart hybrid nanocomposite synthesized here is initially loaded with quenched fluorophore and a unique aptamer-inhibited DNA polymerase. It then undergoes target protein-triggered release of the fluorophore and activation of the DNA polymerase, which can thereby promote multiple catalytic reactions and recycled use of the target protein, resulting in the generation of highly amplified signals. Therefore, a small amount of target protein can lead to a large amount of signal without being consumed. In addition, the programmable control of DNA polymerase activity may effectively reduce background signal and avoid false positive results, which may further facilitate an efficient detection of small amounts of protein. By taking the detection of human stress-induced phosphoprotein 1 (STIP1) as an example, the excellent performance of this method has been verified. Furthermore, the proposed method has been used to analyze serum STIP1 from patients of ovarian cancer, showing promising application in clinical practice.

Aptamer-mediated universal enzyme assay based on target-triggered DNA polymerase activity

We herein describe an innovative method for a universal fluorescence turn-on enzyme assay, which relies on the target enzyme-triggered DNA polymerase activity. In the first target recognition step, the target enzyme is designed to destabilize detection probe derived from an aptamer specific to DNA polymerase containing the overhang sequence and the complementary blocker DNA, which consequently leads to the recovery of DNA polymerase activity inhibited by the detection probe. This target-triggered polymerase activity is monitored in the second signal transduction step based on primer extension reaction coupled with TaqMan probe. Utilizing this design principle, we have successfully detected the activities of two model enzymes, exonuclease I and uracil DNA glycosylase with high sensitivity and selectivity. Since this strategy is composed of separated target recognition and signal transduction modules, it could be universally employed for the sensitive determination of numerous different target enzymes by simply redesigning the overhang sequence of detection probe, while keeping TaqMan probe-based signal transduction module as a universal signaling tool.

Rapid identification of health care-associated infections with an integrated fluorescence anisotropy system

Health care-associated infections (HAIs) and drug-resistant pathogens have become a major health care issue with millions of reported cases every year. Advanced diagnostics would allow clinicians to more quickly determine the most effective treatment, reduce the nonspecific use of broad-spectrum antimicrobials, and facilitate enrollment in new antibiotic treatments. We present a new integrated system, polarization anisotropy diagnostics (PAD), for rapid detection of HAI pathogens. The PAD uses changes of fluorescence anisotropy when detection probes recognize target bacterial nucleic acids. The technology is inherently robust against environmental noise and economically scalable for parallel measurements. The assay is fast (2 hours) and performed on-site in a single-tube format. When applied to clinical samples obtained from interventional procedures, the PAD determined the overall bacterial burden, differentiated HAI bacterial species, and identified drug resistance and virulence status. The PAD system holds promise as a powerful tool for near-patient, rapid HAI testing.

Metal ion triggers for reversible switching of DNA polymerase

A new strategy to modulate DNA polymerase activity in a reversible and switchable manner was devised by using the novel interactions between DNA bases and metal ions.

Fluorescence Polarization Based Nucleic Acid Testing for Rapid and Cost-Effective Diagnosis of Infectious Disease

A new nucleic acid detection method was developed for a rapid and cost-effective diagnosis of infectious disease. This approach relies on the three unique elements: 1) detection probes that regulate DNA polymerase activity in response to the complementary target DNA; 2) universal reporters conjugated with a single fluorophore; and 3) fluorescence polarization (FP) detection. As a proof-of-concept, the assay was used to detect and sub-type Salmonella bacteria with sensitivities down to a single bacterium in less than three hours.