Fluorescence-Encoded Time-Domain Coherent Raman Spectroscopy in the Visible Range

Fluorescence-encoded vibrational spectroscopy has attracted increasing attention by virtue of its high sensitivity and high chemical specificity. We recently demonstrated fluorescence-encoded time-domain coherent Raman spectroscopy (FLETCHERS), which enables low-frequency vibrational spectroscopy of low-concentration fluorophores using near-infrared (800-900 nm) light excitation. However, the feasibility of this study was constrained by the scarcity of excitable molecules in the near-infrared range. Consequently, the broader applicability of FLETCHERS has not been investigated. Here we extend the capabilities of FLETCHERS into the visible range by employing a noncollinear optical parametric amplifier as a light source, significantly enhancing its versatility. Specifically, we use the method, which we refer to as visible FLETCHERS (vFLETCHERS), to individually acquire Raman spectra from five visible fluorophores that have absorption peaks in the 600-700 nm region. These results not only confirm the versatility of vFLETCHERS for a wide range of molecules but also allude to its widespread applicability in biological research through highly sensitive supermultiplexed imaging.

Triplet-triplet annihilation photon upconversion-mediated photochemical reactions

Photon upconversion is a method for harnessing high-energy excited states from low-energy photons. Such photons, particularly in the red and near-infrared wavelength ranges, can penetrate tissue deeply and undergo less competitive absorption in coloured reaction media, enhancing the efficiency of large-scale reactions and in vivo phototherapy. Among various upconversion methodologies, the organic-based triplet-triplet annihilation upconversion (TTA-UC) stands out - demonstrating high upconversion efficiencies, requiring low excitation power densities and featuring tunable absorption and emission wavelengths. These factors contribute to improved photochemical reactions for fields such as photoredox catalysis, photoactivation, 3D printing and immunotherapy. In this Review, we explore concepts and design principles of organic TTA-UC-mediated photochemical reactions, highlighting notable advancements in the field, as well as identify challenges and propose potential solutions. This Review sheds light on the potential of organic TTA-UC to advance beyond the traditional photochemical reactions and paves the way for research in various fields and clinical applications.

Photophysics and its application in photon upconversion

Photoluminescence (PL) upconversion is a phenomenon involving light-matter interaction, where the energy of the emitted photons is higher than that of the incident photons. PL upconversion has promising applications in optoelectronic devices, displays, photovoltaics, imaging, diagnosis and treatment. In this review, we summarize the mechanism of PL upconversion and ultrafast PL physical processes. In particular, we highlight the advances in laser cooling, biological imaging, volumetric displays and photonics.

Effect of Surface Modification on the Luminescence of Individual Upconversion Nanoparticles

Lanthanide-doped upconversion nanoparticles (UCNPs) hold promise for single-molecule imaging owing to their excellent photostability and minimal autofluorescence. However, their limited water dispersibility, often from the hydrophobic oleic acid ligand during synthesis, is a challenge. To address this, various surface modification strategies' impact on single-particle upconversion luminescence are studied. UCNPs are made hydrophilic through methods like ligand exchange with dye IR806, HCl or NOBF4 treatment, silica coating (SiO2 or mesoporous mSiO2 ), and self-assembly with polymer of DSPE-PEG or F127. The studies revealed that UCNPs modified with NOBF4 and DSPE-PEG exhibited notably higher single-particle brightness with minimal quenching (3% and 8%, respectively), followed by SiO2 , F127, IR806, mSiO2 , and HCl (84% quenching). HCl disrupted UCNPs's crystal lattice, weakening luminescence, while mSiO2 absorbed solvent molecules, causing luminescence quenching. Energy transfer to IR806 also reduced the brightness. Additionally, a prevalence of upconversion red emission over green is observed, with the red-to-green ratio increasing with irradiance. UCNPs coated with DSPE-PEG exhibited the brightest single-particle luminescence in water, retaining 48% of its original emission due to a lower critical micelle concentration and superior water protection. In summary, the investigation provides valuable insights into the role of surface chemistry on UCNPs at the single-particle level.

Developments and Challenges Involving Triplet Transfer across Organic/Inorganic Heterojunctions for Singlet Fission and Photon Upconversion

In this Perspective, we provide an overview of recent advances in harvesting triplets for photovoltaic and photon upconversion applications from two angles. In singlet fission-sensitized solar cells, the triplets are harvested through a low band gap semiconductor such as Si. Recent literature has shown how a thin interlayer or orientation of the singlet fission molecule can successfully lead to triplet transfer. On the other hand, the integration of transition metal dichalcogenides (TMDCs) with suitable organic molecules has shown triplet-triplet annihilation upconversion (TTA-UC) of near-infrared photons. We consider the theoretical aspect of the triplet transfer process between a TMDC and organic semiconductors. We discuss possible bottlenecks that can limit the harvesting of energy from triplets and perspectives to overcome these.

Bodipy Dimer for Enhancing Triplet-Triplet Annihilation Upconversion Performance

Triplet-triplet annihilation upconversion (TTA-UC) has considerable potential for emerging applications in bioimaging, optogenetics, photoredox catalysis, solar energy harvesting, etc. Fluoroboron dipyrrole (Bodipy) dyes are an essential type of annihilator in TTA-UC. However, conventional Bodipy dyes generally have large molar extinction coefficients and small Stokes shifts (<20 nm), subjecting them to severe internal filtration effects at high concentrations, and resulting in low upconversion quantum efficiency of TTA-UC systems using Bodipy dyes as annihilators. In this study, a Bodipy dimer (B-2) with large Stokes shifts was synthesized using the strategy of dimerization of an already reported Bodipy annihilator (B-1). Photophysical characterization and theoretical chemical analysis showed that both B-1 and B-2 can couple with the red light-activated photosensitizer PdTPBP to fulfill TTA-UC; however, the higher fluorescence quantum yield of B-2 resulted in a higher upconversion efficiency (η_UC) for PdTPBP/B-2 (10.7%) than for PdTPBP/B-1 (4.0%). This study proposes a new strategy to expand Bodipy Stokes shifts and improve TTA-UC performance, which can facilitate the application of TTA-UC in photonics and biophotonics.

BioMOF-Based Anti-Cancer Drug Delivery Systems

A variety of nanomaterials have been developed specifically for biomedical applications, such as drug delivery in cancer treatment. These materials involve both synthetic and natural nanoparticles and nanofibers of varying dimensions. The efficacy of a drug delivery system (DDS) depends on its biocompatibility, intrinsic high surface area, high interconnected porosity, and chemical functionality. Recent advances in metal-organic framework (MOF) nanostructures have led to the achievement of these desirable features. MOFs consist of metal ions and organic linkers that are assembled in different geometries and can be produced in 0, 1, 2, or 3 dimensions. The defining features of MOFs are their outstanding surface area, interconnected porosity, and variable chemical functionality, which enable an endless range of modalities for loading drugs into their hierarchical structures. MOFs, coupled with biocompatibility requisites, are now regarded as highly successful DDSs for the treatment of diverse diseases. This review aims to present the development and applications of DDSs based on chemically-functionalized MOF nanostructures in the context of cancer treatment. A concise overview of the structure, synthesis, and mode of action of MOF-DDS is provided.

Revisiting carboxylic group functionalization of silica sol-gel materials

The carboxylic chemical group is a ubiquitous moiety present in amino acids, a ligand for transition metals, a colloidal stabilizer, and a weak acidic ion-exchanger in polymeric resins and given this property, it is attractive for responsive materials or nanopore-based gating applications. As the number of uses increases, subtle requirements are imposed on this molecular group when anchored to various platforms for the functioning of an integrated chemical system. In this context, silica stands as an inert and multipurpose platform that enables the anchoring of multiple chemical entities combined through several orthogonal synthesis methods on the interface. Surface chemical modification relies on the use of organoalkoxysilanes that must meet the demand of tuned chemical properties; this, in turn, urges for innovative approaches for having an improved, but simple, organic toolbox. Starting from commonly available molecular precursors, several approaches have emerged: hydrosilylation, click thiol-ene additions, the use of carbodiimides or the reaction between cyclic anhydrides and anchored amines. In this review, we analyze the importance of the COOH groups in the area of materials science and the commercial availability of COOH-based silanes and present new approaches for obtaining COOH-based organoalkoxide precursors. Undoubtedly, this will attract widespread interest for the ultimate design of highly integrated chemical platforms.

Up-to-Five-Photon Upconversion from Near-Infrared to Ultraviolet Luminescence Coupled to Aluminum Plasmonic Lattices

The incorporation of upconversion luminescence (UCL) materials into various plasmonic structures promotes light-matter interactions in nanophotonic systems. It has been experimentally demonstrated that UCL enhancement entailing two photons exhibits a quadratic dependence on the excitation intensity. However, in the field of plasmonics, there have not been sufficient studies on high-order multi-photon upconversion processes. We report up-to-five-photon UCL, wherein λ = 1550 nm near-infrared light is converted to 382 nm ultraviolet light, from core-inert shell nanoparticles coupled to aluminum plasmonic lattices. The five-photon UCL intensity of nanoparticles on the plasmonic lattice is over 800 times stronger than that on the flat glass. We demonstrate that the enhancement of UCL scales with the nth power of the local field enhancement for n-photon process. These findings give a strategy to obtain high-order multi-photon UPL with aluminum plasmonic nanostructures and can contribute to anti-counterfeiting application.

Image-Guided Precision Treatments

Chemotherapy, radiotherapy, and surgery are traditional cancer treatments, which usually produce unpredictable side effects and potential risks to normal healthy organs/tissues. Thus, safe and reliable treatment strategies are urgently required for maximized therapeutic efficiency to lesions and minimized risks to healthy regions. To this end, molecular imaging is responsible to undertake a specific targeting therapy. Besides that, the image guidance as a precision visualized approach for real-time in situ evaluations as well as an intraoperational navigation approach has earned attractive attention in the past decade. Along with the rapid development of multifunctional micro-/nanobiomaterials, versatile cutting-edge and advanced therapy strategies (e.g., thermal therapy, dynamic therapy, gas therapy, etc.) have been achieved and greatly contributed to the image-guided precision treatments in every aspect. Therefore, this chapter aims to discuss about both traditional and advanced cancer treatments and especially to elucidate the important roles that visualized medicine has been playing in the image-guided precision treatments.

Recent Developments of Microscopic Study for Lanthanide and Manganese Doped Luminescent Materials

Luminescent materials are indispensable for applications in lighting, displays and photovoltaics, which can transfer, absorb, store and utilize light energy. Their performance is closely related with their size and morphologies, exact atomic arrangement, and local configuration about photofunctional centers. Advanced electron microscopy-based techniques have enabled the possibility to study nanostructures with atomic resolution. Especially, with the advanced micro-electro-mechanical systems, it is able to characterize the luminescent materials at the atomic scale under various environments, providing a deep understanding of the luminescent mechanism. Accordingly, this review summarizes the recent achievements of microscopic study to directly image the microstructure and local environment of activators in lanthanide and manganese (Ln/Mn²⁺ )-doped luminescent materials, including: 1) bulk materials, the typical systems are nitride/oxynitride phosphors; and 2) nanomaterials, such as nanocrystals (hexagonal-phase NaLnF₄ and perovskite) and 2D nanosheets (Ca₂ Ta₃ O₁₀ and MoS₂ ). Finally, the challenges and limitations are highlighted, and some possible solutions to facilitate the developments of advanced luminescent materials are provided.

A design of red emission CDs-based aptasensor for sensitive detection of insulin via fluorescence resonance energy transfer

We successfully designed an aptasensor based on the red emission carbon dots (R-CDs) and effectively detected insulin (INS) via fluorescence resonance energy transfer (FRET). In the process, the aptamer (apt) labeled with R-CDs (R-CDs@apt) was used as fluorescence donor and graphene oxide (GO) was used as fluorescence receptor. The successful detection due to the aptamer sequence has a certain affinity for Go and INS, while the affinity for INS is stronger than that of GO. When INS is not added to the detection system, the aptamer is adsorbed onto the surface of GO, shortening the distance between R-CDs@apt and GO, resulting in FRET and the quenching of fluorescence of R-CDs@apt. When INS was added to the detection system, the aptamer selectively bound INS and separated from the adsorption of GO, FRET gradually disappeared and the fluorescence of R-CDs@apt/GO/INS system was restored. By comparing the changes of fluorescence intensity before and after adding INS, the detection of INS was implemented. The aptasensor has a good linear curve with the detection limit of as low as 1.1 nM when the concentration of INS reached 1.3-150 nM. This method has excellent selectivity and anti-interference. Therefore, it is a potential method for detecting substances in biological fluids.

Advances in upconversion luminescence nanomaterial-based biosensor for virus diagnosis

Various infectious viruses have been posing a major threat to global public health, especially SARS-CoV-2, which has already claimed more than six million lives up to now. Tremendous efforts have been made to develop effective techniques for rapid and reliable pathogen detection. The unique characteristics of upconversion nanoparticles (UCNPs) pose numerous advantages when employed in biosensors, and they are a promising candidate for virus detection. Herein, this Review will discuss the recent advancement in the UCNP-based biosensors for virus and biomarkers detection. We summarize four basic principles that guide the design of UCNP-based biosensors, which are utilized with luminescent or electric responses as output signals. These strategies under fundamental mechanisms facilitate the enhancement of the sensitivity of UCNP-based biosensors. Moreover, a detailed discussion and benefits of applying UCNP in various virus bioassays will be presented. We will also address some obstacles in these detection techniques and suggest routes for progress in the field. These progressions will undoubtedly pose UCNP-based biosensors in a prominent position for providing a convenient, alternative approach to virus detection.

Enhancement of single upconversion nanoparticle imaging by topologically segregated core-shell structure with inward energy migration

Manipulating topological arrangement is a powerful tool for tuning energy migration in natural photosynthetic proteins and artificial polymers. Here, we report an inorganic optical nanosystem composed of NaErF₄ and NaYbF₄, in which topological arrangement enhanced upconversion luminescence. Three architectures are designed for considerations pertaining to energy migration and energy transfer within nanoparticles: outside-in, inside-out, and local energy transfer. The outside-in architecture produces the maximum upconversion luminescence, around 6-times brighter than that of the inside-out at the single-particle level. Monte Carlo simulation suggests a topology-dependent energy migration favoring the upconversion luminescence of outside-in structure. The optimized outside-in structure shows more than an order of magnitude enhancement of upconversion brightness compared to the conventional core-shell structure at the single-particle level and is used for long-term single-particle tracking in living cells. Our findings enable rational nanoprobe engineering for single-molecule imaging and also reveal counter-intuitive relationships between upconversion nanoparticle structure and optical properties.

Dopant ion concentration-dependent upconversion luminescence of cubic SrF2:Yb3+,Er3+ nanocrystals prepared by a fluorolytic sol-gel method

A fluorolytic sol-gel method was used for the fast and simple synthesis of small cubic-phase SrF₂:Yb³⁺,Er³⁺ upconversion (UC) nanocrystals (UCNC) of different composition at room temperature. Systematic studies of the crystal phase and particle size of this Yb³⁺,Er³⁺-concentration series as well as excitation power density (P)-dependent UC luminescence (UCL) spectra, UCL quantum yields (Φ_UCL), and UCL decay kinetics yielded maximum UCL performance for doping amounts of Yb³⁺ of 13.5% and Er³⁺ of 1.3% in the studied doping and P-range (30-400 W cm^-2). Furthermore, Φ_UCL were determined to be similar to popular β-NaYF₄:Yb³⁺,Er³⁺. The relative spectral UCL distributions revealed that all UCNC show a strong red emission in the studied doping and P-range (30-400 W cm^-2) and suggest that the UCL quenching pathway for unshelled cubic-phase SrF₂:Yb³⁺,Er³⁺ UCNC differs from the commonly accepted population and depopulation pathways of β-NaYF₄:Yb³⁺,Er³⁺ UCNC. In SrF₂:Yb³⁺,Er³⁺ UCNC the ⁴S_3/2 → ⁴I_13/2 transition exhibits a notably stronger sensitivity towards P and reveals increasing values for decreasing Yb³⁺-Yb³⁺ distances while the ⁴I_9/2 → ⁴I_15/2 transition is significantly less affected by P and energy migration facilitated UCL quenching. These results emphasize the complexity of the UC processes and the decisive role of the crystal phase and symmetry of the host lattice on the operative UCL quenching mechanism in addition to surface effects. Moreover, the room temperature UCNC synthesis enabled a systematic investigation of the influence of the calcination temperature on the crystal phase of powder-UCNC and the associated UCL properties. Calcination studies of solid UCNC of optimized doping concentration in the temperature range of 175 °C and 800 °C showed the beneficial influence of temperature-induced healing of crystal defects on UCL and the onset of a phase separation connected with the oxygenation of the lanthanide ions at elevated temperature. This further emphasizes the sensitivity of the UC process to the crystal phase and quality of the host matrix.

Recent progress in upconversion nanomaterials for emerging optical biological applications

The recent advances of upconversion nanoparticles (UCNPs) have made them the ideal "partner" for a variety of biological applications. In this review, we describe the emerging biological optical applications of UCNPs, focus on their potential therapeutic advantages. Firstly, we briefly review the development and mechanisms of upconversion luminescence, including organic and inorganic UCNPs. Next, in the section on UCNPs for imaging and detection, we list the development of UCNPs in visualization, temperature sensing, and detection. In the section on therapy, recent results are described concerning optogenetics and neurotherapy. Tumor therapy is another major part of this section, including the synergistic application of phototherapy such as photoimmunotherapy. In a special section, we briefly cover the integration of UCNPs in therapeutics. Finally, we present our understanding of the limitations and prospects of applications of UCNPs in biological fields, hoping to provide a more comprehensive understanding of UCNPs and attract more attention.

Electrodeposition of Lithium-Based Upconversion Nanoparticle Thin Films for Efficient Perovskite Solar Cells

In this work, high-quality lithium-based, LiYF4=Yb3+,Er3+ upconversion (UC) thin film was electrodeposited on fluorene-doped tin oxide (FTO) glass for solar cell applications. A complete perovskite solar cell (PSC) was fabricated on top of the FTO glass coated with UC thin film and named (UC-PSC device). The fabricated UC-PSC device demonstrated a higher power conversion efficiency (PCE) of 19.1%, an additional photocurrent, and a better fill factor (FF) of 76% in comparison to the pristine PSC device (PCE = ~16.57%; FF = 71%). Furthermore, the photovoltaic performance of the UC-PSC device was then tested under concentrated sunlight with a power conversion efficiency (PCE) of 24% without cooling system complexity. The reported results open the door toward efficient PSCs for renewable and green energy applications.

Rare earth nanoparticles for sprayed and intravenous NIR II imaging and photodynamic therapy of tongue cancer

In this research, rare earth nanoparticles coupled with dihydroartemisinin (DHA) and a targeted antibody (RENP-DHA-Cap) for sprayed NIR II imaging and photodynamic therapy (PDT) of tongue cancer were designed. Genetic algorithms combined with combinatorial chemistry were proposed and successfully achieved in a single optimized luminescent phosphor with enhanced NIR II and high upconversion luminescence (UCL) under a NIR laser of wavelength 980 nm or/and 808 nm. In particular, T1 magnetic resonance imaging (MRI) signals can be adjusted with the Gd ion concentration. In combination with the targeted antibody of capmatinib (Cap), precise NIR II imaging for in situ tongue cancer by a simple spray method can be achieved. Most importantly, NIR II imaging and PDT treatment can be realized with RENP-DHA-capmatinib injected intravenously. This orthogonal theranostic mode with precise diagnosis under 808 nm and targeted effective treatment under 980 nm may promote tongue cancer theranostics.

Controlling upconversion in emerging multilayer core-shell nanostructures: from fundamentals to frontier applications

Lanthanide-based upconversion nanomaterials have recently attracted considerable attention in both fundamental research and various frontier applications owing to their excellent photon upconversion performance and favourable physicochemical properties. In particular, the emergence of multi-layer core-shell (MLCS) nanostructures offers a versatile and powerful tool to realize well-defined matrix compositions and spatial distributions of the dopant on the nanometer length scale. In contrast to the conventional nanomaterials and commonly investigated core-shell nanoparticles, the rational design of MLCS nanostructures allows us to deliberately introduce more functional properties into an upconversion system, thus providing unprecedented opportunities for the precise manipulation of energy transfer channels, the dynamic control of upconversion processes, the fine tuning of switchable emission colours and new functional integration at a single-particle level. In this review, we present a summary and discussion on the key aspects of the recent progress in lanthanide-based MLCS nanoparticles, including the manipulation of emission and lifetime, the switchable multicolour output and the lanthanide ionic interactions on the nanoscale. Benefitting from the multifunctional and versatile luminescence properties, the MLCS nanostructures exhibit great potential in diversities of frontier applications such as three-dimensional display, upconversion laser, optical memory, anti-counterfeiting, thermometry, bioimaging, and therapy. The outlook and challenges as well as perspectives for the research in MLCS nanostructure materials are also provided. This review would be greatly helpful in exploring new structural designs of lanthanide-based materials to further manipulate the upconversion phenomenon and expand their application boundaries.

On the photostability and luminescence of dye-sensitized upconverting nanoparticles using modified IR820 dyes

Dye sensitization is a promising route to enhance luminescence from lanthanide-doped upconverting nanoparticles (LnUCNPs) by improving the photon harvesting capability of LnUCNPs through the use of dye molecules, characterized by higher absorption coefficients. The literature does not fully address the poor photostability of NIR dyes, hindering solution-based applications. The improvements achieved by dye-sensitized LnUCNPs are usually obtained by comparison with non-dye sensitized LnUCNPs. This comparison results in exciting the LnUCNPs at different wavelengths with respect to the dye-sensitized LnUCNPs or at the same wavelengths, where, however, the non-dye sensitized LnUCNPs do not absorb. Both these comparisons are hardly conclusive for a quantification of the improvements achieved by dye-sensitization. Both shortcomings were addressed by studying the photodegradation via thorough spectroscopic evaluations of a 4-nitrothiophenol-modified and unmodified IR820-LnUCNP system. The modified IR820 dye system exhibits a 200% enhancement in the emission of NaGdF₄:Er³⁺,Yb³⁺/NaGdF₄:Yb³⁺ nanoparticles relative to the unmodified IR820-sensitized LnUCNPs and emits for over twice the duration, demonstrating a substantial improvement over previous dye-LnUCNP systems. Upconversion dynamics between the dyes and Er³⁺ establish the importance of back-transfer dynamics in modulating the dye-LnUCNP luminescence. Quantum yield measurements further illustrate the mechanism of sensitization and increased efficiency of this new nanosystem.

Tumor-Microenvironment-Activated Reactive Oxygen Species Amplifier for Enzymatic Cascade Cancer Starvation/Chemodynamic /Immunotherapy

At present, some progress has been made in the field of cancer theranostics based on nanocatalysts (NCs), but achieving precise theranostics in response to the specific tumor microenvironment (TME) remains a major challenge. Herein, a TME-responsive upconversion nanoparticles (UCNPs)-based smart UCNPs@Cu-Cys-GOx (UCCG) nanosystem is engineered, which combines natural enzymes and nanozymes so as to amplify reactive oxygen species (ROS) generation in situ for cancer starvation/chemodynamic/immunotherapy. One of the biggest merits of this material is that it can be preserved inert (off) in normal tissues, and only in the TME can it be specifically activated (on) through a series of enzymatic cascades to boost ROS production via a strategy of open source (H₂ O₂ self-supplying ability) and reduce expenditure (glutathione (GSH) consuming ability). More importantly, the enhanced oxidative stress by UCCG NCs reverses the immunosuppressive TME, and facilitates antitumor immune responses. Meanwhile, the starvation/chemodynamic synergistic therapy triggered by UCCG combined with PD-L1 antibody effectively inhibits the growth of primary tumors and cancer metastasis. In addition, the UCNPs in UCCG present upconversion luminescence enhancement, which can be exploited to visualize the reinforced ROS generation in real time. Collectively, this work provides an original method for the devising and exploitation of UCNPs-based catalytic immunotherapy.

One-photon red light-triggered disassembly of small-molecule nanoparticles for drug delivery

BACKGROUND

Photoresponsive drug delivery can achieve spatiotemporal control of drug accumulation at desired sites. Long-wavelength light is preferable owing to its deep tissue penetration and low toxicity. One-photon upconversion-like photolysis via triplet-triplet energy transfer (TTET) between photosensitizer and photoresponsive group enables the use of long-wavelength light to activate short-wavelength light-responsive groups. However, such process requires oxygen-free environment to achieve efficient photolysis due to the oxygen quenching of triplet excited states.

RESULTS

Herein, we report a strategy that uses red light to trigger disassembly of small-molecule nanoparticles by one-photon upconversion-like photolysis for cancer therapy. A photocleavable trigonal molecule, BTAEA, self-assembled into nanoparticles and enclosed photosensitizer, PtTPBP. Such nanoparticles protected TTET-based photolysis from oxygen quenching in normoxia aqueous solutions, resulting in efficient red light-triggered BTAEA cleavage, dissociation of nanoparticles and subsequent cargo release. With paclitaxel as the model drug, the red light-triggered drug release system demonstrated promising anti-tumor efficacy both in vitro and in vivo.

CONCLUSIONS

This study provides a practical reference for constructing photoresponsive nanocarriers based on the one-photon upconversion-like photolysis.

Photon Upconversion for Photovoltaics and Photocatalysis: A Critical Review

Opportunities for enhancing solar energy harvesting using photon upconversion are reviewed. The increasing prominence of bifacial solar cells is an enabling factor for the implementation of upconversion, however, when the realistic constraints of current best-performing silicon devices are considered, many challenges remain before silicon photovoltaics operating under nonconcentrated sunlight can be enhanced via lanthanide-based upconversion. A photophysical model reveals that >1-2 orders of magnitude increase in the intermediate state lifetime, energy transfer rate, or generation rate would be needed before such solar upconversion could start to become efficient. Methods to increase the generation rate such as the use of cosensitizers to expand the absorption range and the use of plasmonics or photonic structures are reviewed. The opportunities and challenges for these approaches (or combinations thereof) to achieve efficient solar upconversion are discussed. The opportunity for enhancing the performance of technologies such as luminescent solar concentrators by combining upconversion together with micro-optics is also reviewed. Triplet-triplet annihilation-based upconversion is progressing steadily toward being relevant to lower-bandgap solar cells. Looking toward photocatalysis, photophysical modeling indicates that current blue-to-ultraviolet lanthanide upconversion systems are very inefficient. However, hope remains in this direction for organic upconversion enhancing the performance of visible-light-active photocatalysts.

Upconversion luminescent nanomaterials: A promising new platform for food safety analysis

Foodborne diseases have become a significant threat to public health worldwide. Development of analytical techniques that enable fast and accurate detection of foodborne pathogens is significant for food science and safety research. Assays based on lanthanide (Ln) ion-doped upconversion nanoparticles (UCNPs) show up as a cutting edge platform in biomedical fields because of the superior physicochemical features of UCNPs, including negligible autofluorescence, large signal-to-noise ratio, minimum photodamage to biological samples, high penetration depth, and attractive optical and chemical features. In recent decades, this novel and promising technology has been gradually introduced to food safety research. Herein, we have reviewed the recent progress of Ln³⁺-doped UCNPs in food safety research with emphasis on the following aspects: 1) the upconversion mechanism and detection principles; 2) the history of UCNPs development in analytical chemistry; 3) the in-depth state-of-the-art synthesis strategies, including synthesis protocols for UCNPs, luminescence, structure, morphology, and surface engineering; 4) applications of UCNPs in foodborne pathogens detection, including mycotoxins, heavy metal ions, pesticide residue, antibiotics, estrogen residue, and pathogenic bacteria; and 5) the challenging and future perspectives of using UCNPs in food safety research. Considering the diversity and complexity of the foodborne harmful substances, developing novel detections and quantification techniques and the rigorous investigations about the effect of the harmful substances on human health should be accelerated.

NIR laser scanning microscopy for photophysical characterization of upconversion nanoparticles and nanohybrids

Photophysical characterization of upconversion nanoparticles (UCNPs) and nanohybrids (UCNHs) is more challenging than that of down-conversion nanomaterials. Moreover, it is still difficult to gain knowledge about the homogeneity of the sample and colocalization of emissive chromophores and nanoparticles in nanohybrids. Near infrared laser scanning microscopy (NIR-LSM) is a well-known and useful imaging technique, which enables excitation in the NIR region and has been extensively applied to optical fluorescence imaging of organic fluorophores and nanomaterials, such as quantum dots, which exhibit a short-lived emission. NIR-LSM has recently been used to determine the empirical emission lifetime of UCNPs, thus extending its application range to nanomaterials with a long lifetime emission. Here, we review our previous findings and include new measurements and samples to fully address the potential of this technique. NIR-LSM has proved to be extraordinarily useful not only for photophysical characterization of UCNHs consisting of UCNPs capped with a fluorophore to easily visualize the occurrence of the resonance energy transfer process between the UCNH constituents and their homogeneity, but also to assess the colocalization of the fluorophore and the UCNP in the UCNH; all this information can be acquired on the micro-/nano-meter scale by just taking one image.

Photostable and Small YVO4:Yb,Er Upconversion Nanoparticles in Water

In this work, we report a simple method of silica coating of upconversion nanoparticles (UCNPs) to obtain well-crystalline particles that remain small and not agglomerated after high-temperature post-annealing, and produce bright visible emission when pumped with near-infrared light. This enables many interesting biological applications, including high-contrast and deep tissue imaging, quantum sensing and super-resolution microscopy. These VO₄-based UNCPs are an attractive alternative to fluoride-based crystals for water-based biosensing applications.

Application of DNA sequences in anti-counterfeiting: Current progress and challenges

Counterfeiting has never been more challenging than during the COVID-19 pandemic as counterfeit test kits and therapeutics have been discovered in the market. Current anti-counterfeiting labels have weaknesses: they can either be duplicated easily, are expensive or ill-suited for the existing complex supply chains. While RFID tags provide for an excellent alternative to current anti-counterfeiting methods, they can prove to be expensive and other routes involving nanomaterials can be difficult to encrypt. A DNA based anticounterfeiting system has significant advantages such as relative ease of synthesis and vast data storage abilities, along with great potential in encryption. Although DNA is equipped with such beneficial properties, major challenges that limit its real-world anti-counterfeiting applications include protection in harsh environments, rapid inexpensive sequence determination, and its attachment to products. This review elaborates the current progress of DNA based anti-counterfeiting systems and identifies technological gaps that need to be filled for its practical application. Progress made on addressing the primary challenges associated with the use of DNA, and potential solutions are discussed.

Rare-Earth Incorporated Alloy Catalysts: Synthesis, Properties, and Applications

To improve the performance of metallic catalysts, alloying provides an efficient methodology to design state-of-the-art materials. As emerging functional materials, rare-earth metal compounds can integrate the unique orbital structure and catalytic behavior of rare earth elements into metallic materials. Such rare-earth containing alloy catalysts proffer an opportunity to tailor electronic properties, tune charged carrier transport, and synergize surface reactivity, which are expected to significantly improve the performance and stability of catalysis. Despite its significance, there are only few reviews on rare earth containing alloys or related topics. This review summarizes the composition, synthesis, and applications of rare earth containing alloys in the field of catalysis. Subsequent to comprehensively summarizing and constructively discussing the existing work, the challenges and possibilities of future research on rare-earth metal compound materials are evaluated.

A Spontaneous Membrane-Adsorption Approach to Enhancing Second Near-Infrared Deep-Imaging-Guided Intracranial Tumor Therapy

Herein, a functional class of microenvironment-associated nanomaterials is reported for improving the second near-infrared (NIR-II) imaging and photothermal therapeutic effect on intracranial tumors via a spontaneous membrane-adsorption approach. Specific peptides, photothermal agents, and biological alkylating agents were designed to endow the nanogels with high targeting specificity, photothermal properties, and pharmacological effects. Importantly, the frozen scanning electron microscopy technology (cryo-SEM) was utilized to observe the self-association of nanomaterials on tumor cells. Interestingly, the spontaneous membrane-adsorption behavior of nanomaterials was captured through direct imaging evidence. Histological analysis showed that the cross-linking adhesion in intracranial tumor and monodispersity in normal tissues of the nanogels not only enhanced the retention time but also ensured excellent biocompatibility. Impressively, in vivo data confirmed that the microenvironment-associated nanogels could significantly enhance brain tumor clearance rate within a short treatment timeframe (only two weeks). In short, utilizing the spontaneous membrane-adsorption strategy can significantly improve NIR-II diagnosis and phototherapy in brain diseases while avoiding high-risk complications.

Targeted Luminescent Probes for Precise Upconversion/NIR II Luminescence Diagnosis of Lung Adenocarcinoma

In this research, the antibody of the searched hub genes has been proposed to combine with a rare-earth composite for an upconversion luminescence (UCL) and downconversion (DCL) NIR-II imaging strategy for the diagnosis of lung adenocarcinoma (LUAD). Weighted gene co-expression network analysis is used to search the most relevant hub genes, and the required top genes that contribute to tumorigenesis (negative: CLEC3B, MFAP4, PECAM1, and FHL1; positive: CCNB2, CDCA5, HMMR, and TOP2A) are identified and validated by survival analysis and transcriptional and translational results. Meanwhile, fluorescence imaging probes (NaYF₄:Yb,Er,Eu@NaYF₄:Nd, denoted as NYF:Eu NPs) with multimodal optical imaging properties of downconversion and upconversion luminescence in the visible region and luminescence in the near infrared II region are designed with various uniform sizes and enhanced penetration and sensitivity. Finally, when the NYF:Eu NP probe is combined with antibodies of these chosen positive hub genes (such as, TOP2A and CCNB2), the in vitro and in vivo animal experiments (flow cytometry, cell counting kit-8 assay using A549 cells, and in vivo immunohistochemistry IHC microscopy images of LUAD from patient cases) indicate that the designed nanoprobes can be excellently used as a targeted optical probe for future accurate diagnosis and surgery navigation of LUAD in contrast with other cancer cells and normal cells. This strategy of antibodies combined with optical probes provides a dual-modal luminescence imaging method for precise medicine.

Engineering Red-Enhanced and Biocompatible Upconversion Nanoparticles

The exceptional optical properties of lanthanide-doped upconversion nanoparticles (UCNPs) make them among the best fluorescent markers for many promising bioapplications. To fully utilize the unique advantages of the UCNPs for bioapplications, recent significant efforts have been put into improving the brightness of small UCNPs crystals by optimizing dopant concentrations and utilizing the addition of inert shells to avoid surface quenching effects. In this work, we engineered bright and small size upconversion nanoparticles in a core–shell–shell (CSS) structure. The emission of the synthesized CSS UCNPs is enhanced in the biological transparency window under biocompatible excitation wavelength by optimizing dopant ion concentrations. We also investigated the biosafety of the synthesized CSS UCNP particles in living cell models to ensure bright and non-toxic fluorescent probes for promising bioapplications.

Integration of IR-808 and thiol-capped Au–Bi bimetallic nanoparticles for NIR light mediated photothermal/photodynamic therapy and imaging

A novel Au–Bi bimetallic nanoplatform has been developed for enhanced photodynamic and photothermal therapy.

Multimodal Luminescent Yb3+ /Er3+ /Bi3+ -Doped Perovskite Single Crystals for X-ray Detection and Anti-Counterfeiting

Anti-counterfeiting techniques have become a global topic since they is correlated to the information and data safety, in which multimodal luminescence is one of the most desirable candidates for practical applications. However, it is a long-standing challenge to actualize robust multimodal luminescence with high thermal stability and humid resistance. Conventionally, the multimodal luminescence is usually achieved by the combination of upconversion and downshifting luminescence, which only responds to the electromagnetic waves in a limited range. Herein, the Yb³⁺ /Er³⁺ /Bi³⁺ co-doped Cs₂ Ag_0.6 Na_0.4 InCl₆ perovskite material is reported as an efficient multimodal luminescence material. Beyond the excitation of ultraviolet light and near-infrared laser (980 nm), this work extends multimodal luminescence to the excitation of X-ray. Besides the flexible excitation sources, this material also shows the exceptional luminescence performance, in which the X-ray detection limit reaches the level of nGy s^-1 , indicating a great potential for further application as a colorless pigment in the anti-counterfeiting field. More importantly, the obtained double perovskite features high stability against both humidity and temperature up to 400 °C. This integrated multifunctional luminescent material provides a new directional solution for the development of multifunctional optical materials and devices.

Contemporary Synthesis of Ultrasmall (sub-10 nm) Upconverting Nanomaterials

Due to their unique photophysical properties, upconverting nanoparticles (UCNPs), i. e. particles capable of converting near-infrared (NIR) photons into tunable emissions in the range of ultraviolet (UV) to NIR, have great potential for use in various biomedical fields such as bioimaging, photodynamic therapy and bioanalytical applications. As far as biomedical applications are concerned, these materials have a number of advantageous properties such as brilliant luminescence and exceptional photostability. Very small "stealth" particles (sub-10 nm), which can circulate in the body largely undetected by the immune system, are particularly important for in vivo use. The fabrication of such particles, which simultaneously have a defined (ultrasmall) size and the required optical properties, is a great challenge and an area that is in its infancy. This minireview provides a concise overview of recent developments on appropriate synthetic methodologies to produce such UCNPs. Particular attention was given to the influence of both surfactants and dopants used to precisely adjust size, crystalline phase and optical properties of UCNPs.

Optimized Multimetal Sensitized Phosphor for Enhanced Red Up-Conversion Luminescence by Machine Learning

In this research, machine learning including the genetic algorithm (GA) and support vector machine (SVM) algorithm is used to solve the "low up-conversion luminescence (UCL) intensity" problem in order to find the optimal phosphor with enhanced red UCL emission using multielement K/Li/Mn metal modulation. Compared with the first generation of phosphors, the best phosphors' fluorescence intensity occurs in the third generation optimized by the GA, with a stronger brightness (4.91-fold), a higher relative quantum yield (6.40-fold), and an enhanced tissue penetration depth (by 5 mm). The single and multiple dopants effect on the upconversion intensity of K+Li+Mn sensitizers is also studied: the intensity increases first and then decreases with the increase of Yb/Er/K+Li+Mn content, and the optimized K+Li+Mn concentration is 6.03%. In order to confirm the stability of the brightness optimization by the GA, a batch of phosphors was synthesized with the same element proportion, and the similarity of fluorescence intensity of two batches of phosphors was evaluated by the SVM algorithm with the classification accuracy index. Finally, the optimized phosphor was used for bioimaging and phosphor-LED.

Metal-Organic Framework Nanoparticles Induce Pyroptosis in Cells Controlled by the Extracellular pH

Ion homeostasis is essential for cellular survival, and elevated concentrations of specific ions are used to start distinct forms of programmed cell death. However, investigating the influence of certain ions on cells in a controlled way has been hampered due to the tight regulation of ion import by cells. Here, it is shown that lipid-coated iron-based metal-organic framework nanoparticles are able to deliver and release high amounts of iron ions into cells. While high concentrations of iron often trigger ferroptosis, here, the released iron induces pyroptosis, a form of cell death involving the immune system. The iron release occurs only in slightly acidic extracellular environments restricting cell death to cells in acidic microenvironments and allowing for external control. The release mechanism is based on endocytosis facilitated by the lipid-coating followed by degradation of the nanoparticle in the lysosome via cysteine-mediated reduction, which is enhanced in slightly acidic extracellular environment. Thus, a new functionality of hybrid nanoparticles is demonstrated, which uses their nanoarchitecture to facilitate controlled ion delivery into cells. Based on the selectivity for acidic microenvironments, the described nanoparticles may also be used for immunotherapy: the nanoparticles may directly affect the primary tumor and the induced pyroptosis activates the immune system.

Self-Sufficient and Highly Efficient Gold Sandwich Upconversion Nanocomposite Lasers for Stretchable and Bio-applications

Multifunctional lanthanide-doped upconversion nanoparticles (UCNPs) have spread their wings in the fields of flexible optoelectronics and biomedical applications. One of the ongoing challenges lies in achieving UCNP-based nanocomposites, which enable a continuous-wave (CW) laser action at ultralow thresholds. Here, gold sandwich UCNP nanocomposites [gold (Au¹)-UCNP-gold (Au²)] capable of exhibiting lasing at ultralow thresholds under CW excitation are demonstrated. The metastable energy-level characteristics of lanthanides are advantageous for creating population inversion. In particular, localized surface plasmon resonance-based electromagnetic hotspots in the nanocomposites and the huge enhancement of scattering coefficient for the formation of coherent closed loops due to multiple scattering facilitate the process of stimulated emissions as confirmed by theoretical simulations. The nanocomposites are subjected to stretchable systems for enhancing the lasing action (threshold ∼ 0.06 kW cm^-2) via a light-trapping effect. The applications in bioimaging of HeLa cells and antibacterial activity (photothermal therapy) are demonstrated using the newly designed Au¹-UCNP-Au² nanocomposites.

Lanthanide-Based Nanocomposites for Photothermal Therapy under Near-Infrared Laser: Relationship between Light and Heat, Biostability, and Reaction Temperature

In this research, typical organic/inorganic photothermal therapy (PTT) agents were designed with a combination of upconversion luminescent (UCL) or near-infrared (NIR) II imaging rare-earth nanomaterials for photo-acoustic (PA)/UCL/NIR II imaging-guided PTT under NIR laser irradiation. The results show the following: (1) The PTT effect mainly comes from NIR absorption and partly from UCL light conversion. (2) Visible UCL emission is mainly quenched by NIR absorption of the coated PTT agent and partly quenched by visible absorption, indicating that excitation may play a more important role than in the UCL emission process. (3) The biostability of the composite might be decided by the synthesis reaction temperature. Among the five inorganic/organic nanocomposites, UCNP@MnO₂ is the most suitable candidate for cancer diagnosis and treatment because of its stimuli-response ability to the micro-acid environment of tumor cells and highest biostability. The composites generate heat for PTT after entering the tumor cells, and then, the visible light emission gradually regains as MnO₂ is reduced to colorless Mn²⁺ ions, thereby illuminating the cancer cells after the therapy.

Activatable Molecular Probes for Second Near-Infrared Fluorescence, Chemiluminescence, and Photoacoustic Imaging

Optical imaging plays a crucial role in biomedicine. However, due to strong light scattering and autofluorescence in biological tissue between 650-900 nm, conventional optical imaging often has a poor signal-to-background ratio and shallow penetration depth, which limits its ability in deep-tissue in vivo imaging. Second near-infrared fluorescence, chemiluminescence, and photoacoustic imaging modalities mitigate these issues by their respective advantages of minimized light scattering, eliminated external excitation, and ultrasound detection. To enable disease detection, activatable molecular probes (AMPs) with the ability to change their second near-infrared fluorescence, chemiluminescence, or photoacoustic signals in response to a biomarker have been developed. This Minireview summarizes the molecular design strategies, sensing mechanisms, and imaging applications of AMPs. The potential challenges and perspectives of AMPs in deep-tissue imaging are also discussed.

Origin of the giant thermal enhancement of the Er3+ ion's 4I9/2-4I15/2 photoluminescence

The Er³⁺ ion's ⁴I_9/2-⁴I_15/2 emission spectrum, which was rarely reported before, was successfully observed in the as-prepared scheelite-structured CaWO₄:Yb³⁺,Er³⁺ phosphors, upon excitation at 980 nm. This photoluminescence, peaking at ca. 800 nm, was found to undergo a monotonous and giant enhancement with increasing the temperature from 333 to 813 K. Its dependence on pump power revealed that this emission spectrum was from one-photon pumping mechanism. Together with the analysis on luminescence intensity ratio thermometry, it was confirmed that the giant enhancement of the 800 nm emission spectrum was most likely to come from the adjacent lower ⁴I_11/2 state via a thermally coupled way.