One-Step Synthesis of Acylborons from Acyl Chlorides through Copper-Catalyzed Borylation with Polystyrene-Supported PPh3 Ligand

We developed a one-step synthesis of acylborons from both readily available acyl chlorides and bis(pinacolato)diboron through copper(I)-catalyzed borylation. Under the reaction conditions using ^tBuOLi, polystyrene-supported triphenylphosphine as a copper ligand was found to promote the borylation of acyl chlorides while suppressing alcoholysis. This method enables the facile synthesis of potassium acyltrifluoroborates.

Copper-Catalyzed Borylation of Acyl Chlorides with an Alkoxy Diboron Reagent: A Facile Route to Acylboron Compounds

Herein, the copper‐catalyzed borylation of readily available acyl chlorides with bis(pinacolato)diboron, (B₂pin₂) or bis(neopentane glycolato)diboron (B₂neop₂) is reported, which provides stable potassium acyltrifluoroborates (KATs) in good yields from the acylboronate esters. A variety of functional groups are tolerated under the mild reaction conditions (room temperature) and substrates containing different carbon‐skeletons, such as aryl, heteroaryl and primary, secondary, tertiary alkyl are applicable. Acyl N‐methyliminodiacetic acid (MIDA) boronates can also been accessed by modification of the workup procedures. This process is scalable and also amenable to the late‐stage conversion of carboxylic acid‐containing drugs into their acylboron analogues, which have been challenging to prepare previously. A catalytic mechanism is proposed based on in situ monitoring of the reaction between p‐toluoyl chloride and an NHC‐copper(I) boryl complex as well as the isolation of an unusual lithium acylBpinOBpin compound as a key intermediate.

Preparation of Potassium Acyltrifluoroborates (KATs) from Carboxylic Acids by Copper-Catalyzed Borylation of Mixed Anhydrides

We report the preparation of potassium acyltrifluoroborates (KATs) from widely available carboxylic acids. Mixed anhydrides of carboxylic acids were prepared using isobutyl chloroformate and transformed to the corresponding KATs using a commercial copper catalyst, B₂ (pin)₂ , and aqueous KHF₂ . This method allows for the facile preparation of aliphatic, aromatic, and amino acid-derived KATs and is compatible with a variety of functional groups including alkenes, esters, halides, nitriles, and protected amines.

Amide bond formation: beyond the dilemma between activation and racemisation

The development of methods for amide bond formation without recourse to typical condensation reagents has become an emerging research area and has been actively explored in the past quarter century. Inspired by the structure of vitamin B12, we have developed a metal-templated macrolactamisation that generates a new wave towards classical macrolactam synthesis. Further, distinct from the extensively used methods with condensation reagents or catalysts based on catalyst/reagent control our metal-catalysed methods based on substrate control can effectively address long-standing challenges such as racemisation in the field of peptide chemistry. In addition, the substrate-controlled strategy demonstrates the feasibility of "remote" peptide bond-forming reaction catalysed by a metal-ligand complex. Moreover, an originally designed hydrosilane/aminosilane system can avoid not only racemisation but also unnecessary waste production. This feature article documents our discovery and application of our original approaches in amide bond formation.

Copper-Catalyzed Carbonylative Coupling of Alkyl Halides

Transition metal-catalyzed carbonylation reactions represent a direct and atom-economical approach to introduce oxygen functionality into organic compounds, with CO acting as an inexpensive and readily available C1 feedstock. Despite the long history of carbonylation catalysis, including many processes that have been industrialized at bulk scale, there remain several challenges to tackle. For example, noble metals such as Pd, Rh, and Ir are typically used as catalysts for carbonylation reactions, rather than earth-abundant alternatives. Additionally, while carbonylation of C(sp²)-hybridized substrates (e.g., aryl halides) is well-known, carbonylation of unactivated alkyl electrophiles, especially where β-hydride elimination can compete with desired CO migratory insertion at the catalyst site, remains challenging for many systems. Recently, base metal catalysis based on Mn, Co, and other metals has enabled advances in carbonylative coupling of alkyl electrophiles, though the nucleophiles are often limited to alcohols or amines to generate esters or amides as products. Thus, we have targeted base metal-catalyzed carbonylative C-C and C-E (E = N, H, Si, B) coupling reactions as a method for approaching diverse carbonyl compounds of synthetic importance.Initially, we designed a heterobimetallic catalyst platform for carbonylative C-C coupling of alkyl halides with arylboronic esters (i.e., carbonylative Suzuki-Miyaura coupling) to generate aryl alkyl ketones. Subsequently, we developed multicomponent carbonylation reactions of alkyl halides using NHC-Cu catalysts (NHC = N-heterocyclic carbene). These reactions operate by radical mechanisms, converting alkyl halides into either acyl radical or acyl halide intermediates that undergo subsequent C-C or C-E coupling at the Cu site. This mechanistic paradigm is relatively novel in the metal-catalyzed carbonylation area, allowing us to discover a previously unexplored chemical space in carbonylative coupling catalysis. We have successfully developed the following reactions: (a) hydrocarbonylative coupling of alkynes with alkyl halides; (b) borocarbonylative coupling of alkynes with alkyl halides; (c) reductive aminocarbonylation of alkyl halides with nitroarenes; (d) reductive carbonylation of alkyl halides; (e) carbonylative silylation of alkyl halides; (f) carbonylative borylation of alkyl halides. These reactions provide a broad range of valuable products including ketones, allylic alcohols, β-borylenones, amides, alcohols, acylsilanes, and acylborons in an efficient manner. Notably, the preparation of some of these products has previously required multistep syntheses, harsh conditions, or specialized reagents. By contrast, the multicomponent coupling platform that we have developed requires only readily available building blocks and rapidly increases molecular complexity in a single synthetic manipulation.

Chemoselective Amide-Forming Ligation Between Acylsilanes and Hydroxylamines Under Aqueous Conditions

We report the facile amide-forming ligation of acylsilanes with hydroxylamines (ASHA ligation) under aqueous conditions. The ligation is fast, chemoselective, mild, high-yielding and displays excellent functional-group tolerance. Late-stage modifications of an array of marketed drugs, peptides, natural products, and biologically active compounds showcase the robustness and functional-group tolerance of the reaction. The key to the success of the reaction could be the possible formation of the strong Si-O bond via a Brook-type rearrangement. Given its simplicity and efficiency, this ligation has the potential to unfold new applications in the areas of medicinal chemistry and chemical biology.

Rapid Access to Diverse Potassium Acyltrifluoroborates (KATs) through Late-Stage Chemoselective Cross-Coupling Reactions

Potassium acyltrifluoroborates (KATs) are opening up new avenues in chemical biology, materials science, and synthetic organic chemistry due to their intriguing reactivities. However, the synthesis of these compounds remains mostly complicated and time-consuming. Herein, we have developed chemoselective Pd-catalyzed approaches for the late-stage diversification of arenes bearing prefunctionalized KATs. These approaches feature chemoselective cross-coupling, rapid diversification, functional group tolerance, mild reaction conditions, simple operation, and high yields.

One-Step Synthesis of Acylboron Compounds via Copper-Catalyzed Carbonylative Borylation of Alkyl Halides*

A copper-catalyzed carbonylative borylation of unactivated alkyl halides has been developed, enabling efficient synthesis of aliphatic potassium acyltrifluoroborates (KATs) in high yields by treating the in situ formed tetracoordinated acylboron intermediates with aqueous KHF₂ . A variety of functional groups are tolerated under the mild reaction conditions, and primary, secondary, and tertiary alkyl halides are all applicable. In addition, this method also provides facile access to N-methyliminodiacetyl (MIDA) acylboronates as well as α-methylated potassium acyltrifluoroborates in a one-pot manner. Mechanistic studies indicate a radical atom transfer carbonylation (ATC) mechanism to form acyl halide intermediates that are subsequently borylated by (NHC)CuBpin.

Synthesis of Acylboron Compounds

Acylboron compounds are emerging as versatile functional groups with applications in multiple research fields. Their synthesis, however, is still challenging and requires innovative methods. This Minireview provides an overview on the obstacles of acylboron synthesis and highlights notable advances within the last three years on new strategies to overcome the challenges posed by the formation of acyl-boron bonds.

Recent Advances in the Synthesis of Acylboranes and Their Widening Applicability

The most common types of acylboranes are acyltrifluoroborates, acyl MIDA-boronates, and monofluoroacylboronates. Because of the increasing importance of these compounds in the past decade, we highlight the recently reported synthetic strategies to access acylboranes. In addition, an expanding array of their applications has been discovered, based on either the ability of acylboranes to enter rapid amide-forming ligations or the retained ketone-like character of the carbonyl group. Therefore, we also describe ground-breaking achievements where acylboranes were successfully put to use, such as their utility in biochemical, material, and medicinal sciences.

Synthesis of Polymers Containing Potassium Acyltrifluoroborates (KATs) and Post-polymerization Ligation and Conjugation

We report the synthesis of monomers for atom-transfer radical polymerization (ATRP) and a reversible addition-fragmentation chain transfer (RAFT) agent bearing trifluoroborate iminiums (TIMs), which are quantitatively converted into potassium acyltrifluoroborates (KATs) after polymerization. The resulting KAT-containing polymers are suitable for rapid amide-forming ligations for both post-polymerization modification and polymer conjugation. The polymer conjugation occurs rapidly, even under dilute (micromolar) aqueous conditions at ambient temperatures, thereby enabling the synthesis of a variety of linear and star-shaped block copolymers. In addition, we applied post-polymerization modification to the covalent linking of a photocaged cyclic antibiotic (gramicidin S) to the side chains of the KAT-containing copolymer. Cellular assays revealed that the polymer-antibiotic conjugate is biocompatible and provides efficient light-controlled release of the antibiotic on demand.

Synthesis and Tunable Optical Properties of C,N-Chelated Borate Luminophores Derived from Potassium Acyltrifluoroborates

A new class of borate luminophores has been synthesized by a simple two-step reaction using potassium acyltrifluoroborates (KATs) as starting materials. The hydrazones obtained from reactions between KATs and 2-hydrazinopyridines followed by a cyclization resulted in the unprecedented formation of C,N-chelated six-membered bora-heterocycles. Under consideration of the results of DFT and TD-DFT calculations, four luminophores based on such bora-heterocycles are designed and synthesized, which exhibit a tunable fluorescence range from blue to red in the solid state. Moreover, one of the luminophores exhibits mechanofluorochromism from blue to yellow/green. As a result of the aforementioned mechanochromism of one of these luminophores, white-color emission was achieved by simply mixing the four luminophores.

Diversity-Oriented Synthesis of α-Functionalized Acylborons and Borylated Heteroarenes by Nucleophilic Ring Opening of α-Chloroepoxyboronates

The ring-opening reactions of N-methyliminodiacetyl (MIDA) α-chloroepoxyboronates with different nucleophiles allow the modular synthesis of a diverse array of organoboronates. These include seven types of α-functionalized acylboronates and seven types of borylated heteroarenes, some of which are difficult-to-access products using alternative methods. The common synthons, α-chloroepoxyboronates, could be viably synthesized by a two-step procedure from the corresponding alkenyl MIDA boronates. Mild reaction conditions, good functional-group tolerance, and generally good efficiency were observed. The utility of the products was also demonstrated.

Catalytic Synthesis of Potassium Acyltrifluoroborates (KATs) through Chemoselective Cross-Coupling with a Bifunctional Reagent

Potassium acyltrifluoroborates (KATs) are increasingly important functional groups, and general methods for their preparation are of great current interest. We report a bifunctional iminium reagent bearing both a tin nucleophile and a trifluoroborate, which was applied in chemoselective Pd⁰ -catalyzed Migita-Kosugi-Stille cross-coupling reactions owith aryl and vinyl halides. This method gives access to previously inaccessible aromatic and α,β-unsaturated acyltrifluoroborates, including precursors to amino-acid derived KATs.

Traceless Templated Amide-Forming Ligations

Template assistance allows organic reactions to occur under highly dilute conditions-where intermolecular reactions often fail to proceed-by bringing reactants into close spatial proximity. This strategy has been elegantly applied to numerous systems, but always with the retention of at least one of the templating groups in the product. In this report, we describe a traceless, templated amide-forming ligation that proceeds at low micromolar concentration under aqueous conditions in the presence of biomolecules. We utilized the unique features of an acylboronate-hydroxylamine ligation, in which covalent bonds are broken in each of the reactants as the new amide bond is formed. By using streptavidin as a template and acylboronates and O-acylhydroxylamines bearing desthiobiotins that are cleaved upon amide formation, we demonstrate that traceless, templated ligation occurs rapidly even at submicromolar concentrations. The requirement for a close spatial orientation of the functional groups-achieved upon binding to streptavidin-is critical for the observed enhancement in the rate and quantity of product formed.

Concise Synthesis of Potassium Acyltrifluoroborates from Aldehydes through Copper(I)-Catalyzed Borylation/Oxidation

Potassium acyltrifluoroborates (KATs) were prepared through copper(I)-catalyzed borylation of aldehydes and subsequent oxidation. This synthetic route is characterized by the wide range of aldehydes accessible, favorable step economy, mild reaction conditions, and tolerance of various functional groups, and it enables the facile generation of a range of KATs, for example, bearing halide, sulfide, acetal, or ester moieties. Moreover, this method was applied to the three-step synthesis of various α-amino acid analogues that bear a KAT moiety on the C-terminus by using naturally occurring amino acids as the starting material.

Regio- and Diastereoselective Synthesis of Cyclohexadienylborons via an Intermolecular Diels-Alder Reaction of Alkenyl MIDA Boronates with 2-Pyrones

An efficient synthesis of highly functionalized cyclohexadienylborons via an inverse electron-demand Diels-Alder reaction/CO₂ extrusion of alkenyl MIDA boronates with 2-pyrones is outlined. By controlling the reaction temperature, the corresponding C(sp³ )-rich bicyclolactones could also be readily formed. The exo-selective reactions feature good functional-group tolerance, broad substrate scope, and excellent regio- and diastereoselectivity. Oxidation of the cyclohexadienylborons in a one-pot procedure led to the construction of aromatic boronates bearing valuable functional groups. Synthetic transformations of the C-B bond were demonstrated.

Acylboranes: synthetic strategies and applications

Acylboranes are an attractive class of compounds, of which the synthesis has very recently been documented as summarised in this review. Access to these compounds provides a path to study their properties and reactivity.

A revised mechanism for the α-ketoacid hydroxylamine amide forming ligations

The α-ketoacid-hydroxylamine amide-forming (KAHA) ligation reactions were investigated using computational methods to provide improved insights on the mechanism of these reactions.

Nonclassical Routes for Amide Bond Formation

The present review offers an overview of nonclassical (e.g., with no pre- or in situ activation of a carboxylic acid partner) approaches for the construction of amide bonds. The review aims to comprehensively discuss relevant work, which was mainly done in the field in the last 20 years. Organization of the data follows a subdivision according to substrate classes: catalytic direct formation of amides from carboxylic and amines ( section 2 ); the use of carboxylic acid surrogates ( section 3 ); and the use of amine surrogates ( section 4 ). The ligation strategies (NCL, Staudinger, KAHA, KATs, etc.) that could involve both carboxylic acid and amine surrogates are treated separately in section 5 .