Physical Aging of Poly(methyl methacrylate) Brushes and Spin-Coated Films

While there is significant attention aimed at understanding how one-dimensional confinement and chain confirmations can impact the glass transition temperature (Tg) of polymer films, there remains a limited focus on similar effects on sub-Tg processes, notably, structural relaxation. Using spectroscopic ellipsometry, we investigated the combined influence of confinement and molecular packing on Tg and physical aging, i.e., the property changes that accompany structural relaxation, at select film thicknesses and aging temperatures (Ta). We used poly(methyl methacrylate) (PMMA) films in the brush and spin-coated morphologies as model systems. We found that whether a PMMA film exhibited a decrease or increase in physical aging rate with confinement was dependent on the morphology. Notably, PMMA brushes exhibited higher physical aging rates compared to similarly thick spin-coated films at all values of Ta. These intriguing findings reveal the strong effects of confinement and molecular packing on the structural relaxation of polymer films. Results from this study have the potential to aid in the design of thin-film materials with controllable long-term glassy-state properties.

CuBr-mediated surface-initiated controlled radical polymerization in air

Herein, we present a straightforward CuBr-mediated surface-initiated controlled radical polymerization (SI-CRP) method for fabricating polymer brushes using microliter volumes of reaction solution in air and at room temperature. The key advantage of this method is its ability to rapidly grow polymer brushes with oxygen tolerance, driven by the controlled disproportionation of CuI into CuII and Cu0 by CuBr and ligand. We demonstrate the successful preparation of homo-, block, patterned, and wafer-scale polymer brushes. Additionally, the catalyst in CuBr-mediated SI-CRP is reusable, long-lasting, and compatible with various monomers. This work broadens the potential of CuBr for polymer brush growth, making it accessible to both experts and non-experts.

Charge State of Weak Polyelectrolyte Brushes Determines Salt-Dependent Swelling and Hysteretic Behavior

We investigate the combined effects of ionizable monomer fraction f, pH, and monovalent salt concentration Cs on the swelling of weak polyelectrolyte brushes (PEBs) by using in situ ellipsometry. Our system consists of random copolymers of basic (2-(dimethylamino)ethyl acrylate, DMAEA) and neutral (2-hydroxyethyl acrylate, HEA) monomers at varying fractions of ionizable monomer. Swelling of the brushes qualitatively follows the trends predicted by scaling laws for PEBs under different charge states but quantitatively deviates at specific ionic strengths and pH values. We posit these deviations stem from the lack of excluded volume effects and assumptions of strong chain stretching in current theoretical models. Most notably, we uncover a salt-dependent, nonmonotonic hysteretic behavior as weak PEB brushes are cycled from protonated to deprotonated and back. The nonmonotonic trend of hysteresis with salt can be explained by an interplay between the protonation facilitating effects of salt in the osmotic regime and the charge screening effects in the salted regime, which make charge distribution along weak PEBs more uniform. Our results provide insight into the mechanisms that determine whether polyelectrolytes exhibit weak versus strong polyelectrolyte behavior in various environmental conditions.

Roughness-Mediated SI-Fe0CRP for Polymer Brush Engineering toward Superior Drag Reduction

Surface-initiated iron(0)-mediated controlled radical polymerization (SI-Fe0CRP) with low toxicity and excellent biocompatibility is promising for the fabrication of biofunctional polymer coatings. However, the development of Fe(0)-based catalysts remains limited by the lower dissociation activity of the Fe(0) surface in comparison to Cu(0). Here, we found that, by simply polishing the Fe(0) plate surface with sandpaper, the poly(methacryloyloxy)ethyl trimethylammonium chloride brush growth rate has been increased significantly to 3.3 from 0.14 nm min-1 of the pristine Fe(0) plate. The excellent controllability of roughness-mediated SI-Fe0CRP can be demonstrated by customizing multicompartment brushes and triblock brushes. Furthermore, we found that the resulting polymer brush coatings exhibit remarkably low water adhesion (0.097 mN) and an outstanding drag reduction rate of 52% in water. This work provides a promising strategy for regulating the grafting rate of polymer brushes via SI-Fe0CRP for biocompatible marine drag reduction coatings.

Surface Functionalization with Polymer Brushes via Surface-Initiated Atom Transfer Radical Polymerization: Synthesis, Applications, and Current Challenges

Polymer brushes have received great attention in recent years due to their distinctive properties and wide range of applications. The synthesis of polymer brushes typically employs surface-initiated atom transfer radical polymerization (SI-ATRP) techniques. To realize the control of the polymerization process in different environments, various SI-ATRP techniques triggered by different stimuli have been developed. This review focuses on the latest developments in different stimuli-triggered SI-ATRP methods, such as electrochemically mediated, photoinduced, enzyme-assisted, mechanically controlled, and organocatalyzed ATRP. Additionally, SI-ATRP technology triggered by a combination of multiple stimuli sources is also discussed. Furthermore, the applications of polymer brushes in lubrication, biological applications, antifouling, and catalysis are also systematically summarized and discussed. Despite the advancements in the synthesis of various types of 1D, 2D, and 3D polymer brushes via controlled radical polymerization, contemporary challenges remain in the quest for more efficient and straightforward synthetic protocols that allow for precise control over the composition, structure, and functionality of polymer brushes. We anticipate the readers could promote the understanding of surface functionalization based on ATRP-mediated polymer brushes and envision future directions for their application in surface coating technologies.

Galvanic-Replacement-Assisted Synthesis of Nanostructured Silver-Surface for SERS Characterization of Two-Dimensional Polymers

Surface-enhanced Raman scattering (SERS) spectroscopy is a powerful technology in trace analysis. However, the wide applications of SERS in practice are limited by the expensive substrate materials and the complicated preparation processes. Here we report a simple and economical galvanic-replacement-assisted synthesis route to prepare Ag nanoparticles on Cu(0) foil (nanoAg@Cu), which can be directly used as SERS substrate. The fabrication process is fast (ca. 10 min) and easily scaled up to centimeters or even larger. In addition, the morphology of the nanoAg@Cu (with Ag particles size from 30 nm to 160 nm) can be adjusted by various additives (e.g., amino-containing ligands). Finally, we show that the as-prepared nanoAg@Cu can be used for SERS characterization of two-dimensional polymers, and ca. 298 times relative enhancement of Raman intensity is achieved. This work offers a simple and economical strategy for the scalable fabrication of silver-based SERS substrate in thin film analysis.

Surface-Initiated Zerovalent Metal-Mediated Controlled Radical Polymerization (SI-Mt0CRP) for Brush Engineering

ConspectusThe surface-tethered polymer brush has become a powerful approach to tailoring the chemical and physical properties of surfaces and interfaces and revealed broad application prospects in widespread fields such as self-cleaning, surface lubrication, and antibiofouling. Access to these diverse functional polymer brushes is highly dependent on versatile and powerful surface-initiated controlled radical polymerization (SI-CRP) strategies. However, conventional SI-CRP typically requires oxygen exclusion, large amounts of catalysts and monomer solution, and a long reaction time, making it time-consuming and sophisticated. When using a two-plate system consisting of an initiator-bearing substrate and a metal plate, we and our collaborators introduced surface-initiated zerovalent metal-mediated controlled radical polymerization (SI-Mt0CRP). In the SI-Mt0CRP setup, a metal(0) plate (Cu, Fe, Zn, or Sn) is placed proximately to an initiator-functionalized substrate and forms a confined polymerization system which considerably simplifies the synthesis of a wide range of polymer brushes with high grafting densities over large areas (up to the meter scale).In comparison to classical SI-ATRP (catalyzed by metal salts), SI-Mt0CRP demonstrates oxygen tolerance, high controllability, good retention of chain-end functionality, and facile recyclability of the metal catalysts (i.e., metal foil/plate). Taking advantage of the confined geometry of the SI-Mt0CRP setup, polymer brushes with various conformations and architectures are easily accessible while consuming only microliter volumes of monomer solution and without complicated operations under ambient conditions. Owing to these attractive characteristics, SI-Mt0CRP has become a versatile technique for functionalizing materials for targeted applications, ranging from the areas of surface science to materials science and nanotechnology.In this Account, we summarize the recent advances of SI-Mt0CRP catalyzed by zerovalent metals (e.g., Cu, Fe, Zn, and Sn) and highlight the intrinsic advantages of the featured experimental setup, compared with the "classical" SI-CRP in which metal salt, powder, or wire is applied. We further discuss the synthetic features and proposed mechanism of SI-Mt0CRP while emphasizing the various external technologies' (including "on water" reaction, galvanic replacement, lithography, and capillary microfluidic) integrated polymerization systems. We also describe structural polymer brushes, including block copolymers, patterned and gradient structures, and arrayed and binary polymer brushes. Finally, we introduce the diverse polymer brushes that have been prepared using these techniques, with a focus on targeted and emerging applications. We anticipate that the discussion presented in this Account will promote a better understanding of the SI-Mt0CRP technique and advance the future development of practical surface brushing.

Ice-Inspired Polymeric Slippery Surface with Excellent Smoothness, Stability, and Antifouling Properties

Ice is omnipresent in our daily life and possesses intrinsic slipperiness as a result of the formation of a quasi-liquid layer. Thus, the functional surfaces inspired by ice show great prospects in widespread fields from surface lubrication to antifouling coatings. Herein, we report an ice-inspired polymeric slippery surface (II-PSS) constructed by a self-lubricating liquid layer and a densely surface-grafted polymer brush. The polymer brush layer could act as a homogeneous matrix to capture lubricant molecules via strong and dynamic dipole-dipole interactions to form a stable quasi-liquid layer that resembles the ice surface. The II-PSS can be easily fabricated on various solid substrates (e.g., silicon, glass, aluminum oxide, plastics, etc.) with excellent smoothness (roughness of ∼0.4 nm), optical transmittance (∼94.5%), as well as repellence toward diverse liquids with different surface tensions (22.3-72.8 mN m-1), pH values (1-14), salinity, and organic pollutants. Further investigation shows that the II-PSS exhibits extremely low attachment for proteins and marine organisms (e.g., algae and mussels) for over one month. These results demonstrate a robust and promising strategy for high-performance antifouling coatings.

Imaging Heterogeneous 3D Dynamics of Individual Solutes in a Polyelectrolyte Brush

Understanding molecular transport in polyelectrolyte brushes (PEBs) is crucial for applications such as separations, drug delivery, anti-fouling, and biosensors, where structural features of the polymer control intermolecular interactions. The complex structure and local heterogeneity of PEBs, while theoretically predicted, are not easily accessed with conventional experimental methods. In this work, we use 3D single-molecule tracking to understand transport behavior within a cationic poly(2-(N,N-dimethylamino)ethyl acrylate) (PDMAEA) brush using an anionic dye, Alexa Fluor 546, as the probe. The analysis is done by a parallelized, unbiased 3D tracking algorithm. Our results explicitly demonstrate that spatial heterogeneity within the brush manifests as heterogeneity of single-molecule displacements. Two distinct populations of probe motion are identified, with anticorrelated axial and lateral transport confinement, which we believe to correspond to intra- vs inter-chain probe motion.

Ultra-Fast Preparation of Large-Area Graphdiyne-Based Membranes via Alkynylated Surface-Modification for Nanofiltration

Graphdiynes (GDYs), two-dimensional graphene-like carbon systems, are considered as potential advanced membrane material due to their unique physicochemical features. Nevertheless, the scale-up of integrated GDY membranes is technologically challenging, and most studies remain at the theoretical stage. Herein, we report a simple and efficient alkynylated surface-mediated strategy to prepare hydrogen-substituted graphdiyne (HsGDY) membranes on commercial alumina tubes. Surface alkynylation initiates an accelerated surface-confined coupling reaction in the presence of a copper catalyst and facilitates the nanoscale epitaxial lateral growth of HsGDY. A continuous and ultra-thin HsGDY membrane (∼100 nm) can be produced within 15 min. The resulting membranes exhibit outstanding molecular sieving together with excellent water permeances (ca. 1100 L m^-2  h^-1 MPa^-1 ), and show a long-term durability in cross-flow nanofiltration, owing to the superhydrophilic surface and hydrophobic pore walls.

Tinware-Inspired Aerobic Surface-Initiated Controlled Radical Polymerization (SI-Sn0CRP) for Biocompatible Surface Engineering

Surface anchored polymer brushes prepared by surface-initiated controlled radical polymerization (SI-CRP) have raised considerable interest in biomaterials and bioengineering. However, undesired residues of noxious transition metal catalysts critically restrain their widespread biomedical applications. Herein, we present a robust and biocompatible surface-initiated controlled radical polymerization catalyzed by a Sn(0) sheet (SI-Sn⁰CRP) under ambient conditions. Through this approach, microliter volumes of vinyl monomers with diverse functions (heterocyclic, ionic, hydrophilic, and hydrophobic) could be efficiently converted to homogeneous polymer brushes. The excellent controllability of SI-Sn⁰CRP strategy is further demonstrated by the exquisite fabrication of predetermined block and patterned polymer brushes through chain extension and photolithography, respectively. Additionally, in virtue of intrinsic biocompatibility of Sn, the resultant polymer brushes present transcendent affinity toward blood and cell, in marked contrast to those of copper-based approaches. This strategy could provide an avenue for the controllable fabrication of biocompatible polymer brushes toward biological applications.

Seawater-Boosting Surface-Initiated Atom Transfer Radical Polymerization for Functional Polymer Brush Engineering

Iron-mediated surface-initiated reversible deactivation radical polymerization (Fe⁰ SI-RDRP) is an appealing approach to produce robust polymer surfaces with low toxicity and biocompatibility, while its application has been limited so far due to the poor activity of iron-based catalysts. Herein, we show that the iron(0)-mediated surface-initiated atom transfer radical polymerization (Fe⁰ SI-ATRP) could be significantly enhanced by simply using seawater as reaction media. In comparison, there was no polymer brush formation in deionized water. This method could convert a range of monomers to well-defined polymer brushes with unparalleled speed (up to 31.5 nm min^-1) and a minor amount of monomer consumption (μL). Moreover, the resultant polymer brush shows chain-end fidelity which could be exemplified by repetitive Fe⁰ SI-ATRP to obtain tetrablock brushes. Finally, we show the preparation of polymer-brush-gated ion-selective membranes by Fe⁰ SI-ATRP for osmotic energy conversion, which gives excellent power densities of 5.93 W m^-2, outperforming the most reported as well as commercialized benchmark (5 W m^-2).

Oxygen Tolerance in Surface-Initiated Reversible Deactivation Radical Polymerizations: Are Polymer Brushes Turning into Technology?

Over the past three decades, the development of reversible deactivation radical polymerizations (RDRP), and advancements toward more user-friendly and accessible experimental setups have opened the door for nonexperts to design complex macromolecules with well-defined properties. External mediation, improved tolerance to oxygen, and increased reaction volumes for higher synthetic output are some of the many noteworthy technical improvements. The development of RDRPs in solution was paralleled by their application on solid substrates to synthesize surface-grafted "polymer brushes" via surface-initiated RDRP (SI-RDRP). This Viewpoint paper provides a current perspective on recent developments in SI-RDRP methods that are tolerant to oxygen, especially highlighting those that could potentially enable scaling up of the synthesis of brushes for the functionalization of technologically relevant materials.

Galvanic-Replacement-Assisted Surface-Initiated Atom Transfer Radical Polymerization for Functional Polymer Brush Engineering

Here we present a facile and robust strategy, namely, galvanic-replacement-assisted surface-initiated Cu(0)-mediated atom transfer radical polymerization (gr-SI-Cu⁰ATRP, or gr-SI-Cu⁰CRP) for polymer brush engineering under ambient conditions. In gr-SI-Cu⁰ATRP, highly active and nanostructured Cu(0) surfaces are obtained by a simple galvanic replacement on zinc/aluminum surfaces in dilute Cu²⁺ solution. Polymer brush growth rate is extremely high (up to ∼904 nm in 30 min polymerization); meanwhile, both nano Cu(0) surfaces and Cu²⁺ solution can be reused multiple times without losing grafting efficiency. We also demonstrate that the gr-SI-Cu⁰ATRP is advantageous for polymer brush engineering on arbitrary substrates, including flexible (polyethylene terephthalate), curved (polycarbonate), and porous (anodic aluminum oxide), and endow the substrates with various functionalities, for example, anti-icing, antifogging, and ion selectivity.

Design of biointerfaces composed of soft materials using controlled radical polymerizations

Soft interface materials have an immense potential for the improvement of biointerfaces, which are the interface of biological and artificially designed materials. Controlling the chemical and physical structures of the interfaces at the nanometer level plays an important role in understanding the mechanism of the functioning and its applications. Controlled radical polymerization (CRP) techniques, including atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, have been developed in the field of precision polymer chemistry. It allows the formation of well-defined surfaces such as densely packed polymer brushes and self-assembled nanostructures of block copolymers. More recently, a novel technique to prepare polymers containing biomolecules, called biohybrids, has also been developed, which is a consequence of the advancement of CRP so as to proceed in an aqueous media with oxygen. This review article summarizes recent advances in CRP for the design of biointerfaces.

Brush-like polymers: design, synthesis and applications

With the development of controlled polymerisation, almost all polymerisation strategies have been successfully transplanted to surface-initiated polymerisation. The resulting polymer brushes have emerged as an effective tool for surface functionalization and modulation of the surface properties of materials. To meet various demands it is possible to tailor a material surface with polymer brushes that have diverse dimensionalities, morphologies and compositions. The crowded environment within polymer brushes as well as the stretched conformation of polymer chains sometimes provide unique physicochemical properties, which lead to the delicate creation of inorganic-organic hybridised nanostructures, anti-fouling coatings, biomedical carriers, and materials for use in lubrication, photonics and energy storage. So far, challenges remain in the high-precision synthesis and topological control needed to realize extended applications of polymer brushes. In this Feature Article, we highlight the topology, potential application prospects and various synthetic protocols, particularly for recently established methods, for the efficient synthesis of polymer brushes, as well as their benefits and limitations.

Fabrication of Three-Dimensional Polymer-Brush Gradients within Elastomeric Supports by Cu0-Mediated Surface-Initiated ATRP

Cu⁰-mediated surface-initiated ATRP (Cu⁰ SI-ATRP) emerges as a versatile, oxygen-tolerant process to functionalize three-dimensional (3D), microporous supports forming single and multiple polymer-brush gradients with a fully tunable composition. When polymerization mixtures are dispensed on a Cu⁰-coated plate, this acts as oxygen scavenger and source of active catalyst. In the presence of an ATRP initiator-bearing microporous elastomer placed in contact with the metallic plate, the reaction solution infiltrates by capillarity through the support, simultaneously triggering the controlled growth of polymer brushes. The polymer grafting process proceeds with kinetics that are determined by the progressive infiltration of the reaction solution within the microporous support and by the continuous diffusion of catalyst regenerated at the Cu⁰ surface. The combination of these effects enables the accessible generation of 3D polymer-brush gradients extending across the microporous scaffolds used as supports, finally providing materials with a continuous variation of interfacial composition and properties.

Selective removal of toxic organic dyes using Trӧger base-containing sulfone copolymers made from a metal-free thiol-yne click reaction followed by oxidation

Three copolymers TCP1–3 bearing Trӧger's base (TB) units intercalated with various thioether groups were synthesized using a catalyst-free thiol-yne click reaction. TCP1–3 display excellent solubility in common organic solvents allowing for their structural, and photophysical characterization. The thioether groups in TCP1–3 were selectively oxidized into their respective sulfone derivatives under mild oxidation reaction conditions affording the postmodified copolymers TCP4–6. Investigation of organic dye uptake from water by TCP1–6 proved their efficiency as selective adsorbents removing up to 100% of the cationic dye methylene blue (MEB) when compared to anionic dyes, such as Congo red (CR), methyl orange (MO) and methyl blue (MB). The sulfone-containing copolymers TCP4–6 display superior and faster MEB removal efficiencies with respect to their corresponding synthons TCP1–3.

Copolymers TCP1–3 with Trӧger's base units and aryl thioether groups were made via a click reaction. Selective oxidation of the thioethers into sulfone groups afforded TCP4–6 which display up to 100% removal efficiency of methylene blue from water.

Surface Grafting "Band-Aid" for "Everyone": Filter Paper-Assisted Surface-Initiated Polymerization in the Presence of Air

We report herein a facile and generalized approach to the modification of solid surfaces with polymer brushes under ambient conditions: filter paper-assisted surface-initiated Cu0 -mediated controlled radical polymerization (PSI-CuCRP). The polymerization solution wetted filter paper is sandwiched between a copper plate and an initiator-modified substrate, which allows the creation of a surface-initiated polymerization (SIP) "band-aid" so that everyone can perform the surface grafting selectively with good control over the quality of the polymer brushes employing low concentration and microliter amounts of the monomer solution. The versatility of this method is demonstrated by grafting different homo-, block-, and multicomponent polymer brushes by using the same activation system and reaction conditions, the polymerization process can be precisely controlled to yield uniform polymers and show high chain-end functionality which is exemplified by in situ tetra-copolymerization. The combination of photolithography and paper cutting enables to prepare arbitrary three-dimensional patterned polymer brushes on the surface.

Making ATRP More Practical: Oxygen Tolerance

Atom-transfer radical polymerization (ATRP) is a well-known technique for the controlled polymerization of vinyl monomers under mild conditions. However, as with any other radical polymerization, ATRP typically requires rigorous oxygen exclusion, making it time-consuming and challenging to use by nonexperts. In this Account, we discuss various approaches to achieving oxygen tolerance in ATRP, presenting the overall progress in the field.Copper-mediated ATRP, which we first discovered in the late 1990s, uses a Cu^I/L activator that reversibly reacts with the dormant C(sp³)-X polymer chain end, forming a X-Cu^II/L deactivator and a propagating radical. Oxygen interferes with activation and chain propagation by quenching the radicals and oxidizing the activator. At ATRP equilibrium, the activator is present at a much higher concentration than the propagating radicals. Thus, oxidation of the activator is the dominant inhibition pathway. In conventional ATRP, this reaction is irreversible, so oxygen must be strictly excluded to achieve good results.Over the last two decades, our group has developed several ATRP techniques based on the concept of regenerating the activator. When the oxidized activator is continuously converted back to its active reduced form, then the catalytic system itself can act as an oxygen scavenger. Regeneration can be accomplished by reducing agents and photo-, electro-, and mechanochemical stimuli. This family of methods offers a degree of oxygen tolerance, but most of them can tolerate only a limited amount of oxygen and do not allow polymerization in an open vessel.More recently, we discovered that enzymes can be used in auxiliary catalytic systems that directly deoxygenate the reaction medium and protect the polymerization process. We developed a method that uses glucose oxidase (GOx), glucose, and sodium pyruvate to very effectively scavenge oxygen and enable open-vessel ATRP. By adding a second enzyme, horseradish peroxidase (HPR), we managed to extend the role of the auxiliary enzymatic system to generating carbon-based radicals and changed ATRP from an oxygen-sensitive to an oxygen-fueled reaction.While performing control experiments for the enzymatic methods, we noticed that using sodium pyruvate under UV irradiation triggers polymerization without the presence of GOx. This serendipitous discovery allowed us to develop the first oxygen-proof, small-molecule-based, photoinduced ATRP system. It has oxygen tolerance similar to that of the enzymatic methods, exhibits superior compatibility with both aqueous media and organic solvents, and avoids problems associated with purifying polymers from enzymes. The system was able to rapidly polymerize N-isopropylacrylamide, a challenging monomer, with a high degree of control.These contributions have substantially simplified the use of ATRP, making it more practical and accessible to everyone.

Capillary Microfluidic-Assisted Surface Structuring

A facile and universal oxygen-tolerant, capillary microfluidic-derived, controlled radical polymerization for surface structuring (gradient and patterned polymer brushes) is reported. A syringe pump and a filter paper sheet are used as capillary microfluidic to supply the reaction solution (monomer, solvent, and ligand) to a sandwich-shaped setup by placing a flat copper plate onto an ATRP initiator-modified substrate and resulting in gradient polymer brush formation with controlled thickness, steepness, and grafting area, polymers are showing the high chain-end fidelity. Two different polymer brushes (binary polymer brushes) can be simultaneously grown from both ends of the initiator modified substrate by using this method, which can be used to study the interfacial properties of different polymer brushes.

Visual Detection of Thiocyanate Based on Fabry-Perot Etalons with a Responsive Polymer Brush as the Transducer

The detection of thiocyanate (SCN^-) is particularly important in industrial effluents and biological fluids because of the toxic nature of SCN^-. Herein, a metal-insulator-metal (MIM) resonator for visual detection of SCN^- is presented based on a poly[(2-(methacryloyloxy)ethyl) trimethylammonium chloride] (PMETAC) brush. The MIM resonator exhibits obvious color change as the concentration of SCN^- changes, which can be easily distinguished by the naked eyes. In addition, the as-prepared MIM resonator also shows the advantages of good anti-interference, excellent reusability, and fast response rate. Combining the above advantages, the proposed MIM resonator may provide a broad perspective for a wide variety of visible-light applications.

Facile Fabrication of Bio- and Dual-Functional Poly(2-oxazoline) Bottle-Brush Brush Surfaces

Poly(2-oxazoline)s (POx) bottle-brush brushes have excellent biocompatible and lubricious properties, which are promising for the functionalization of surfaces for biomedical devices. Herein, a facile synthesis of POx is reported which is based bottle-brush brushes (BBBs) on solid substrates. Initially, backbone brushes of poly(2-isopropenyl-2-oxazoline) (PIPOx) were fabricated via surface initiated Cu0 plate-mediated controlled radical polymerization (SI-Cu0 CRP). Poly(2-methyl-2-oxazoline) (PMeOx) side chains were subsequently grafted from the PIPOx backbone via living cationic ring opening polymerization (LCROP), which result in ≈100 % increase in brush thickness (from 58 to 110 nm). The resultant BBBs shows tunable thickness up to 300 nm and high grafting density (σ) with 0.42 chains nm-2 . The synthetic procedure of POx BBBs can be further simplified by using SI-Cu0 CRP with POx molecular brush as macromonomer (Mn =536 g mol-1 , PDI=1.10), which results in BBBs surface up to 60 nm with well-defined molecular structure. Both procedures are significantly superior to the state-of-art approaches for the synthesis of POx BBBs, which are promising to design bio-functional surfaces.

Versatile Surface Modification of Hydrogels by Surface-Initiated, Cu0-Mediated Controlled Radical Polymerization

Surface-initiated controlled radical polymerization mediated by a Cu0 plate (SI-Cu0 CRP) emerges as a versatile and efficient method for the functionalization of the exposed surfaces of hydrogels with a wide variety of polymer brushes. When a Cu0 plate is placed in contact with initiator-bearing hydrogel surfaces in the presence of ligand and monomer and under ambient conditions, it rapidly consumes dissolved oxygen from the reaction mixture, further acting as a source of catalyst and leading to the rapid growth of hydrogel-bound polymer chains. Three types of functional surfaces have been prepared as examples of the wide range of potential materials that can be synthesized in this way, including a hydrogel with a protective, hydrophobic surface, a lubricious hydrogel, as well as a hydrogel with thermally switchable frictional properties.

Oxygen Tolerant and Cytocompatible Iron(0)-Mediated ATRP Enables the Controlled Growth of Polymer Brushes from Mammalian Cell Cultures

The use of zerovalent iron (Fe⁰)-coated plates, which act both as a source of catalyst and as a reducing agent during surface-initiated atom transfer radical polymerization (SI-ATRP), enables the controlled growth of a wide range of polymer brushes under ambient conditions utilizing either organic or aqueous reaction media. Thanks to its cytocompatibility, Fe⁰ SI-ATRP can be applied within cell cultures, providing a tool that can broadly and dynamically modify the substrate's affinity toward cells, without influencing their viability. Upon systematically assessing the application of Fe-based catalytic systems in the controlled grafting of polymers, Fe⁰ SI-ATRP emerges as an extremely versatile technique that could be applied to tune the physicochemical properties of a cell's microenvironments on biomaterials or within tissue engineering constructs.

Substrate-independent Cu(0)-mediated controlled radical polymerization: grafting of block copolymer brushes from poly(dopamine) modified surfaces

A method is presented combining poly(dopamine) chemistry and surface-initiated Cu(0)-mediated controlled radical polymerization (SI-CuCRP). Polymer brushes and block copolymer brushes are grafted independent of the original surface properties.

Mechanism and application of surface-initiated ATRP in the presence of a Zn0 plate

SI-Zn⁰-ATRP enables the synthesis of chemically different polymer brushes under full ambient conditions, using just microliter volumes of reaction solutions.

Accessible and sustainable Cu(0)-mediated radical polymerisation for the functionalisation of surfaces

Towards use of environmentally benign solvents and ambient conditions for surface functionalisation by controlled growth of thick cationic polymer brushes.

Boosting or moderating surface-initiated Cu(0)-mediated controlled radical polymerization with external additives

External additives regulate the copper disproportionation/comproportionation equilibrium to control polymer brush growth in surface-initiated Cu(0)-mediated controlled radical polymerization.

Bioinert and Lubricious Surfaces by Macromolecular Design

The modification of a variety of biomaterials and medical devices often encompasses the generation of biopassive and lubricious layers on their exposed surfaces. This is valid when the synthetic supports are required to integrate within physiological media without altering their interfacial composition and when the minimization of shear stress prevents or reduces damage to the surrounding environment. In many of these cases, hydrophilic polymer brushes assembled from surface-interacting polymer adsorbates or directly grown by surface-initiated polymerizations (SIP) are chosen. Although growing efforts by polymer chemists have been focusing on varying the composition of polymer brushes in order to attain increasingly bioinert and lubricious surfaces, the precise modulation of polymer architecture has simultaneously enabled us to substantially broaden the tuning potential for the above-mentioned properties. This feature article concentrates on reviewing this latter strategy, comparatively analyzing how polymer brush parameters such as molecular weight and grafting density, the application of block copolymers, the introduction of branching and cross-links, or the variation of polymer topology beyond the simple, linear chains determine highly technologically relevant properties, such as biopassivity and lubrication.

Growing Polymer Brushes from a Variety of Substrates under Ambient Conditions by Cu0-Mediated Surface-Initiated ATRP

Cu⁰-mediated surface-initiated atom transfer radical polymerization (Cu⁰ SI-ATRP) is a highly versatile, oxygen-tolerant, and extremely controlled polymer-grafting technique that enables the modification of flat inorganic surfaces, as well as porous organic and polymeric supports of different compositions. Exploiting the intimate contact between a copper plate, acting as a source of catalyst and reducing agent, and an initiator-bearing support, Cu⁰ SI-ATRP enables the rapid growth of biopassive, lubricious brushes from large flat surfaces, as well as from various organic supports, including cellulose fibers and elastomers, using microliter volumes of reaction mixtures, and without the need for deoxygenation of reaction mixtures or an inert atmosphere. Thanks to a detailed analysis of its mechanism and the parameters governing the polymerization process, polymer brush growth by Cu⁰ SI-ATRP can be precisely modulated and adapted to be applied to morphologically and chemically different substrates, setting up the basis for translating SI-ATRP methods from academic studies into technologically relevant surface-modification approaches.

Translating Surface-Initiated Atom Transfer Radical Polymerization into Technology: The Mechanism of Cu0-Mediated SI-ATRP under Environmental Conditions

The exceptional features of Cu⁰-mediated surface-initiated atom transfer radical polymerization (Cu⁰ SI-ATRP), and its potential for implementation in technologically relevant surface functionalizations are demonstrated thanks to a comprehensive understanding of its mechanism. Cu⁰ SI-ATRP enables the synthesis of multifunctional polymer brushes with a remarkable degree of control, over extremely large areas and without the need for inert atmosphere or deoxygenation of monomer solutions. When a polymerization mixture is placed between a flat copper plate and an ATRP-initiator-functionalized substrate, the vertical distance between these two overlaying surfaces determines the tolerance of the grafting process toward the oxygen, while the composition of the polymerization solution emerges as the critical parameter regulating polymer-grafting kinetics. At very small distances between the copper plate and the initiating surfaces, the oxygen dissolved in the solution is rapidly consumed via oxidation of the metallic substrate. In the presence of ligand, copper species diffuse to the surface-immobilized initiators and trigger a rapid growth of polymer brushes. Concurrently, the presence and concentration of added Cu^II regulates the generation of Cu^I-based activators through comproportionation with Cu⁰. Hence, under oxygen-tolerant conditions, the extent of comproportionation, together with the solvent-dependent rate constant of activation (k_act) of ATRP are the main determinants of the growth rate of polymer brushes.

Antifouling Surface Coating Using Droplet-Based SI-ARGET ATRP of Carboxybetaine under Open-Air Conditions

The formation of a dense zwitterionic brush through surface-initiated atom transfer radical polymerization (SI-ATRP) is a typical graft-from approach used to achieve antifouling surfaces with high fidelity; however, their air-tightness may cause inconvenience to users. In this context, activator regenerated by electron transfer (ARGET) ATRP is emerging as an alternative surface-coating tool because limited amount of air is allowed to form a dense polymer brush. However, the degree of air tolerance that can ensure a thick polymer brush has not been clearly defined, limiting its practical usage under ambient-air conditions. In this study, we investigated the SI-ARGET ATRP of carboxybetaine (CB) by changing the air conditions, along with the air-related parameters, such as the concentration of the reducing agent, the volume of the polymerization solution (PS), or the solvent composition, and correlated their effects with the poly(CB) thickness. Based on the optimized reaction conditions, a poly(CB) brush with reliable thickness was feasibly formed even under open-air conditions without a degassing step. In addition, a microliter droplet (∼100 μL) of PS was sufficient to proceed with the SI-ARGET ATRP for the covering of a poly(CB) brush on the surface area of interest. By applying an optimized SI-ARGET ATRP of CB, antifouling was feasibly achieved in the surface region of interest using an array to form a large surface area under fully exposed air conditions. In other words, optimized SI-ARGET ATRP enabled the formation of a thick poly(CB) brush on the surfaces of various dimensions under open-air conditions.

Surface-Initiated Cu(0)-Mediated CRP for the Rapid and Controlled Synthesis of Quasi-3D Structured Polymer Brushes

Surface-initiated controlled radical polymerization mediated by Cu(0) plate (SI-Cu(0)_plate-CRP) is an extremely effective and versatile technique for the synthesis of functional polymer brushes from vinyl monomers on planar substrates. The advantages of SI-Cu(0)_plate-CRP in comparison to "classical" SI-CRP methods not only rely on the easy accessibility, handling, and recycling of the catalyst source, but also on the faster brush growth rates, and exceptionally high reinitiation efficiencies and grafting densities for the obtained brushes. The confined geometry of the SI-Cu(0)_plate-CRP reaction setup, with a Cu(0) plate placed in close proximity to the initiator bearing substrate, considerably simplifies the preparation of polymer brushes over large areas, and the fabrication of gradient, patterned and arrayed polymer brushes. In this viewpoint we summarize the recent developments and applications of SI-Cu(0)_plate-CRP, emphasizing its mechanism, advantages, and standing challenges.

Microfluidically mediated atom-transfer radical polymerization

Microfluidically mediated atom-transfer radical polymerization can be used to fabricate polymer brushes with a controlled gradient.

An efficient process for the Cu(0)-mediated synthesis and subsequent chain extension of poly(methyl acrylate) macroinitiator

A process combining a continuous tubular and a semi-batch reactor is established as an efficient method for the synthesis of block copolymers.

"On Water" Surface-initiated Polymerization of Hydrophobic Monomers

We present the "on water" surface-initiated Cu-mediated controlled radical polymerization ("on water" SI-CuCRP) that converts hydrophobic monomers in aqueous reaction medium to polymer brushes at unparalleled speed and efficiency. The method allows the facile conversion of a variety of common monomers under most simple reaction conditions and with minimal monomer amounts to thick and homogeneous polymer brushes. The highly living character of the "on water" SI-CuCRP allowed the preparation of decablock (homo)polymer brushes and opens the pathway to sequentially controlled polymer brushes on solids.

Polymerization driven monomer passage through monolayer chemical vapour deposition graphene

Mass transport through graphene is receiving increasing attention due to the potential for molecular sieving. Experimental studies are mostly limited to the translocation of protons, ions, and water molecules, and results for larger molecules through graphene are rare. Here, we perform controlled radical polymerization with surface-anchored self-assembled initiator monolayer in a monomer solution with single-layer graphene separating the initiator from the monomer. We demonstrate that neutral monomers are able to pass through the graphene (via native defects) and increase the graphene defects ratio (Raman I_D/I_G) from ca. 0.09 to 0.22. The translocations of anionic and cationic monomers through graphene are significantly slower due to chemical interactions of monomers with the graphene defects. Interestingly, if micropatterned initiator-monolayers are used, the translocations of anionic monomers apparently cut the graphene sheet into congruent microscopic structures. The varied interactions between monomers and graphene defects are further investigated by quantum molecular dynamics simulations.

Up in the air: oxygen tolerance in controlled/living radical polymerisation

The requirement for deoxygenation in controlled/living radical polymerisation (CLRP) places significant limitations on its widespread implementation by necessitating the use of large reaction volumes, sealed reaction vessels as well as requiring access to specialised equipment such as a glove box and/or inert gas source. As a result, in recent years there has been intense interest in developing strategies for overcoming the effects of oxygen inhibition in CLRP and therefore remove the necessity for deoxygenation. In this review, we highlight several strategies for achieving oxygen tolerant CLRP including: "polymerising through" oxygen, enzyme mediated deoxygenation and the continuous regeneration of a redox-active catalyst. In order to provide further clarity to the field, we also establish some basic parameters for evaluating the degree of "oxygen tolerance" that can be achieved using a given oxygen scrubbing strategy. Finally, we propose some applications that could most benefit from the implementation of oxygen tolerant CLRP and provide a perspective on the future direction of this field.