An Anionic Mesoionic Carbene (anMIC) and its Transformation to Metallo MIC-Boranes: Synthesis and Properties

Neutral mesoionic carbenes (MICs) based on a 1,2,3-triazole core have had a strong impact on various branches of chemistry such as homogeneous catalysis, electrocatalysis, and photochemistry/photophysics. We present here the first general synthesis of anionic mesoionic carbenes (anMICs, 2) based on a 1,2,3-triazole core and a borate backbone. The free anMIC is stable in solution under an inert atmosphere at low temperatures, and can be stored for several weeks. Analysis of donor properties shows that these anMICs are extremely strong σ-donors, bypassing the donor properties of strong donors such as MICs, NHCs, anionic NHCs and N-heterocyclic olefins. The room temperature conversion of the free anMICs leads to three equally interesting compound classes: an amide-coordinated borane based on a MIC-borane backbone (2BR3), a polymeric triazolide (1Li) and an amide-coordinated metallo-MIC-borane. The metallo-MIC-borane (3Li) is an interesting precursor for the synthesis of further amide-coordinated MIC-borane compounds. Quantum chemical calculations have been used to elucidate the mechanism of transformation of the anMICs. We thus introduce three new categories of mesoionic compounds here with potential for different branches of chemistry and beyond.

Recyclable and (Bio)degradable Polyesters in a Circular Plastics Economy

Polyesters carrying polar main-chain ester linkages exhibit distinct material properties for diverse applications and thus play an important role in today's plastics economy. It is anticipated that they will play an even greater role in tomorrow's circular plastics economy that focuses on sustainability, thanks to the abundant availability of their biosourced building blocks and the presence of the main-chain ester bonds that can be chemically or biologically cleaved on demand by multiple methods and thus bring about more desired end-of-life plastic waste management options. Because of this potential and promise, there have been intense research activities directed at addressing recycling, upcycling or biodegradation of existing legacy polyesters, designing their biorenewable alternatives, and redesigning future polyesters with intrinsic chemical recyclability and tailored performance that can rival today's commodity plastics that are either petroleum based and/or hard to recycle. This review captures these exciting recent developments and outlines future challenges and opportunities. Case studies on the legacy polyesters, poly(lactic acid), poly(3-hydroxyalkanoate)s, poly(ethylene terephthalate), poly(butylene succinate), and poly(butylene-adipate terephthalate), are presented, and emerging chemically recyclable polyesters are comprehensively reviewed.

Poly(ether)s derived from oxa-Michael polymerization: a comprehensive review

Poly(ether)s represent an important class of polymers and are typically formed by ring-opening polymerization, Williamson ether synthesis, or self-condensation of alcohols. The oxa-Michael reaction presents another method to form poly(ether)s with additional functional groups in the polymer backbone starting from di- or triols and electron deficient olefins such as acrylates, sulfones, or acrylamides. However, research on oxa-Michael polymerization is still limited. Herein, we outline the principles of the oxa-Michael polymerization and focus on the synthesis and preparation of poly(ether-sulfone)s, poly(ether-ester)s, poly(ether)s, and poly(ether-amide)s. Further, challenges as well as future perspectives of the oxa-Michael polymerization are discussed.

Graphical abstract

Reaching High Stereoselectivity and Activity in Organocatalyzed Ring-Opening Polymerization of Racemic Lactide by the Combined Use of a Chiral (Thio)Urea and a N-Heterocyclic Carbene

Stereochemical control during polymerization is a key strategy of polymer chemistry to achieve semicrystalline engineered plastics. The stereoselective ring-opening polymerization (ROP) of racemic lactide (rac-LA), which can lead to highly isotactic polylactide (PLA), is one of the emblematic examples in this area. Surprisingly, stereoselective ROP of rac-LA employing chiral organocatalysts has been under-leveraged. Here we show that a commercially available chiral thiourea (TU1), or its urea homologue (U1), can be used in conjunction with an appropriately selected N-heterocyclic carbene (NHC) to trigger the stereoselective ROP of rac-LA at room temperature in toluene. Both a high organic catalysis activity (>90% monomer conversion in 5-9 h) and a high stereoselectivity (probability of formation of meso dyads, P_m, in the range 0.82-0.93) can be achieved by thus pairing a NHC and a chiral amino(thio)urea. The less sterically hindered and the more basic NHC, that is, a NHC bearing tert-butyl substituents (NHC_tBu), provides the highest stereoselectivity when employed in conjunction with the chiral TU1 or U1. This asymmetric organic catalysis strategy, as applied here in polymerization chemistry, further expands the field of possibilities to achieve bioplastics with adapted thermomechanical properties.

Nontoxic N-Heterocyclic Olefin Catalyst Systems for Well-Defined Polymerization of Biocompatible Aliphatic Polycarbonates

Herein, N-heterocyclic olefins (NHOs) are utilized as catalysts for the ring-opening polymerization (ROP) of functional aliphatic carbonates. This emerging class of catalysts provides high reactivity and rapid conversion. Aiming for the polymerization of monomers with high side chain functionality, six-membered carbonates derived from 2,2-bis(hydroxymethyl)propionic acid (bis-MPA) served as model compounds. Tuning the reactivity of NHO from predominant side chain transesterification at room temperature toward ring-opening at lowered temperatures (-40 °C) enables controlled ROP. These refined conditions give narrowly distributed polymers of the hydrophobic carbonate 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one (MTC-OBn) (Đ < 1.30) at (pseudo)first-order kinetic polymerization progression. End group definition of these polymers demonstrated by mass spectrometry underlines the absence of side reactions. For the active ester monomer 5-methyl-5-pentafluorophenyloxycarbonyl-1,3-dioxane-2-one (MTC-PFP) with elevated side chain reactivity, a cocatalysis system consisting of NHO and the Lewis acid magnesium iodide is required to retune the reactivity from side chains toward controlled ROP. Excellent definition of the products (Đ < 1.30) and mass spectrometry data demonstrate the feasibility of this cocatalyst approach, since MTC-PFP has thus far only been polymerized successfully using acidic catalysts with moderate control. The broad feasibility of our findings was further demonstrated by the synthesis of block copolymers for bioapplications and their successful nanoparticular assembly. High tolerability of NHO in vitro with concentrations ranging up to 400 μM (equivalent to 0.056 mg/mL) further emphasize the suitability as a catalyst for the synthesis of bioapplicable materials. The polycarbonate block copolymer mPEG₄₄-b-poly(MTC-OBn) enables physical entrapment of hydrophobic dyes in sub-20 nm micelles, whereas the active ester block copolymer mPEG₄₄-b-poly(MTC-PFP) is postfunctionalizable by covalent dye attachment. Both block copolymers thereby serve as platforms for physical or covalent modification of nanocarriers for drug delivery.

Polyethers Based on Short-Chain Alkyl Glycidyl Ethers: Thermoresponsive and Highly Biocompatible Materials

The polymerization of short-chain alkyl glycidyl ethers (SCAGEs) enables the synthesis of biocompatible polyethers with finely tunable hydrophilicity. Aliphatic polyethers, most prominently poly(ethylene glycol) (PEG), are utilized in manifold biomedical applications due to their excellent biocompatibility and aqueous solubility. By incorporation of short hydrophobic side-chains at linear polyglycerol, control of aqueous solubility and the respective lower critical solution temperature (LCST) in aqueous solution is feasible. Concurrently, the chemically inert character in analogy to PEG is maintained, as no further functional groups are introduced at the polyether structure. Adjustment of the hydrophilicity and the thermoresponsive behavior of the resulting poly(glycidyl ether)s in a broad temperature range is achieved either by the combination of the different SCAGEs or with PEG as a hydrophilic block. Homopolymers of methyl and ethyl glycidyl ether (PGME, PEGE) are soluble in aqueous solution at room temperature. In contrast, n-propyl glycidyl ether and iso-propyl glycidyl ether lead to hydrophobic polyethers. The use of a variety of ring-opening polymerization techniques allows for controlled polymerization, while simultaneously determining the resulting microstructures. Atactic as well as isotactic polymers are accessible by utilization of the respective racemic or enantiomerically pure monomers. Polymer architectures varying from statistical copolymers, di- and triblock structures to star-shaped architectures, in combination with PEG, have been applied in various thermoresponsive hydrogel formulations or polymeric surface coatings for cell sheet engineering. Materials responding to stimuli are of increasing importance for "smart" biomedical systems, making thermoresponsive polyethers with short-alkyl ether side chains promising candidates for future biomaterials.

Towards high-performance sustainable polymers via isomerization-driven irreversible ring-opening polymerization of five-membered thionolactones

The development of sustainable polymers that possess useful material properties competitive with existing petroleum-derived polymers is a crucial goal but remains a formidable challenge for polymer science. Here we demonstrate that irreversible ring-opening polymerization (IROP) of biomass-derived five-membered thionolactones is an effective and robust strategy for the polymerization of non-strained five-membered rings-these polymerizations are commonly thermodynamically forbidden under ambient conditions, at industrially relevant temperatures of 80-100 °C. Computational studies reveal that the selective IROP of these thionolactones is thermodynamically driven by S/O isomerization during the ring-opening process. IROP of γ-thionobutyrolactone, a representative non-strained thionolactone, affords a sustainable polymer from renewable resources that possesses external-stimuli-triggered degradability. This poly(thiolactone) also exhibits high performance, with its key thermal and mechanical properties comparing well to those of commercial petroleum-based low-density polyethylene. This IROP strategy will enable conversion of five-membered lactones, generally unachievable by other polymerization methods, into sustainable polymers with a range of potential applications.

Diphenyl phosphate/ethyl diphenylphosphinite as an efficient organocatalytic system for ring-opening polymerization of ε-caprolactone and δ-valerolactone

A novel controlled/living ROP method of ε-CL and δ-VL using ethyl diphenylphosphinite/diphenyl phosphate (EDPP/DPP) organocatalytic system was revealed, which involves the activated monomer mechanism and the reversible chain end deactivation process.

Organocatalytic Synthesis of Poly(hydroxymethylfuroate) via Ring-Opening Polymerization of 5-Hydroxymethylfurfural-Based Cyclic Oligoesters

The synthesis of hydroxymethylfuroate macrocyclic oligoesters c(HMF)n promoted by an N-heterocyclic carbene (NHC) organocatalyst is herein presented together with the subsequent organocatalytic, entropically-driven ring-opening polymerization (ED-ROP) leading to the fully...

Synthesis of Diverse Polycarbonates by Organocatalytic Copolymerization of CO2 and Epoxides: From High Pressure and Temperature to Ambient Conditions

Organophosphazenes combined with triethylborane (TEB) were selected as binary organocatalyts for the copolymerization of CO₂ and epoxides. Both the activity and selectivity were highly dependent on the nature of phosphazenes. 2,4,6-Tris[tri(1-pyrrolidinyl)-iminophosphorane]-1,3,5-triazine (C₃ N₃ -Py-P₃ ) with a relatively low basicity (pK_a =26.5 in CD₃ CN) and a bulky molecular size (φ=1.3 nm) exhibited an unprecedented efficiency (TON up to 12240) and selectivity (>99 % polymer selectivity and >99 % carbonate linkages) toward copolymerization of CO₂ and cyclohexene oxide (CHO), and produced CO₂ -based polycarbonates (CO₂ -PCs) with high molar masses (M_n up to 275.5 kDa) at 1 MPa of CO₂ and 80 °C. Surprisingly, this binary catalytic system achieved efficient CO₂ /CHO copolymerization with TOF up to 95 h^-1 at 1 atm pressure and room temperature.

Mechanochemical Release of N-Heterocyclic Carbenes from Flex-Activated Mechanophores

We have discovered a new flex-activated mechanophore that releases an N-heterocyclic carbene (NHC) under mechanical load. The mechanophore design is based upon NHC-carbodiimide (NHC-CDI) adducts and demonstrates an important first step toward flex-activated designs capable of further downstream reactivities. Since the flex-activation is non-destructive to the main polymer chains, the material can be subjected to multiple compression cycles to achieve iterative increases in the activation percentage of mechanophores. Two different NHC structures were demonstrated, signifying the potential modularity of the mechanophore design.

Exploring Oxidative NHC-Catalysis as Organocatalytic Polymerization Strategy towards Polyamide Oligomers

The polycondensation of diamines and dialdehydes promoted by an N-heterocyclic carbene (NHC) catalyst in the presence of a quinone oxidant and hexafluoro-2-propanol (HFIP) is herein presented for the synthesis of oligomeric polyamides (PAs), which are obtained with a number-average molecular weight (M_n ) in the range of 1.7-3.6 kg mol^-1 as determined by NMR analysis. In particular, the utilization of furanic dialdehyde monomers (2,5-diformylfuran, DFF; 5,5'-[oxybis(methylene)]bis[2-furaldehyde], OBFA) to access known and previously unreported biobased PAs is illustrated. The synthesis of higher molecular weight PAs (poly(decamethylene terephthalamide, PA10T, M_n = 62.8 kg mol^-1 ; poly(decamethylene 2,5-furandicarboxylamide, PA10F, M_n = 6.5 kg mol^-1 ) by a two-step polycondensation approach is also described. The thermal properties (TGA and DSC analyses) of the synthesized PAs are reported.

A comparison of zwitterionic and anionic mechanisms in the dual-catalytic polymerization of lactide

Two different polymerization mechanisms for lactide are selectivity addressed to illuminate the respective role of organobase and Lewis acid component.

Poly(ε-lysine) and its derivatives via ring-opening polymerization of biorenewable cyclic lysine

Minireview focused on poly(ε-lysine) and its derivatives via ring-opening polymerization of biorenewable cyclic lysine.

Structure and activity relationship studies of N-heterocyclic olefin and thiourea/urea catalytic systems: application in ring-opening polymerization of lactones

Structure–activity relationship studies of N-heterocyclic olefin and thiourea/urea catalytic systems were performed and applied to ROP of lactones.

A simplified approach for the metal-free polymerization of propylene oxide

Triethyl borane (Et3B), in combination with phosphazene-type superbases, has recently emerged as a powerful co-catalyst for the anionic polymerization of epoxides. Here, it is demonstrated that the monomer-activating property of Et3B can also compensate for the application of much gentler organobases. This not only results in simpler setups, but also significantly reduces nucleophilicity/basicity-derived side reactions. Notably, this principle applies to such a degree that simple 4-dimethylaminopyridine (DMAP) or 1,4-diazabicyclo[2.2.2]octane (DABCO) can serve to polymerize propylene oxide (PO). With suitable initiators, this results for example in very well-defined block copolyethers (Ð M ≤ 1.03) without requiring work-up to remove side products such as PPO homopolymer. Performance correlates nicely with the corresponding organobase proton affinities (PAs), and a limiting PA of 220-230 kcal mol-1 was identified for successful PO polymerization.

DFT Modeling of Organocatalytic Ring-Opening Polymerization of Cyclic Esters: A Crucial Role of Proton Exchange and Hydrogen Bonding

Organocatalysis is highly efficient in the ring-opening polymerization (ROP) of cyclic esters. A variety of initiators broaden the areas of organocatalysis in polymerization of different monomers, such as lactones, cyclic carbonates, lactides or gycolides, ethylene phosphates and phosphonates, and others. The mechanisms of organocatalytic ROP are at least as diverse as the mechanisms of coordination ROP; the study of these mechanisms is critical in ensuring the polymer compositions and architectures. The use of density functional theory (DFT) methods for comparative modeling and visualization of organocatalytic ROP pathways, in line with experimental proof of the structures of the reaction intermediates, make it possible to establish these mechanisms. In the present review, which continues and complements our recent manuscript that focused on DFT modeling of coordination ROP, we summarized the results of DFT modeling of organocatalytic ROP of cyclic esters and some related organocatalytic processes, such as polyester transesterification.

Coordination Ring-Opening Polymerization of Cyclic Esters: A Critical Overview of DFT Modeling and Visualization of the Reaction Mechanisms

Ring-opening polymerization (ROP) of cyclic esters (lactones, lactides, cyclic carbonates and phosphates) is an effective tool to synthesize biocompatible and biodegradable polymers. Metal complexes effectively catalyze ROP, a remarkable diversity of the ROP mechanisms prompted the use of density functional theory (DFT) methods for simulation and visualization of the ROP pathways. Optimization of the molecular structures of the key reaction intermediates and transition states has allowed to explain the values of catalytic activities and stereocontrol events. DFT computation data sets might be viewed as a sound basis for the design of novel ROP catalysts and cyclic substrates, for the creation of new types of homo- and copolymers with promising properties. In this review, we summarized the results of DFT modeling of coordination ROP of cyclic esters. The importance to understand the difference between initiation and propagation stages, to consider the possibility of polymer-catalyst coordination, to figure out the key transition states, and other aspects of DFT simulation and visualization of ROP have been also discussed in our review.

Oxidative NHC-Catalysis as Organocatalytic Platform for the Synthesis of Polyester Oligomers by Step-Growth Polymerization

The application of N-heterocyclic carbene (NHC) catalysis to the polycondensation of diols and dialdehydes under oxidative conditions is herein presented for the synthesis of polyesters using fossil-based (ethylene glycol, phthalaldehydes) and bio-based (furan derivatives, glycerol, isosorbide) monomers. The catalytic dimethyl triazolium/1,8-diazabicyclo[5.4.0]undec-7-ene couple and stoichiometric quinone oxidant afforded polyester oligomers with a number-average molecular weight (M_n ) in the range of 1.5-7.8 kg mol^-1 as determined by NMR analysis. The synthesis of a higher molecular weight polyester (polyethylene terephthalate, PET) by an NHC-promoted two-step procedure via oligoester intermediates is also illustrated together with the catalyst-controlled preparation of cross-linked or linear polyesters derived from the trifunctional glycerol. The thermal properties (TGA and DSC analyses) of the synthesized oligoesters are also reported.

Glycidyl Tosylate: Polymerization of a "Non-Polymerizable" Monomer permits Universal Post-Functionalization of Polyethers

Glycidyl tosylate appears to be a non-polymerizable epoxide when nucleophilic initiators are used because of the excellent leaving group properties of the tosylate. However, using the monomer-activated mechanism, this unusual monomer can be copolymerized with ethylene oxide (EO) and propylene oxide (PO), respectively, yielding copolymers with 7-25 % incorporated tosylate-moieties. The microstructure of the copolymers was investigated via in situ 1 H NMR spectroscopy, and the reactivity ratios of the copolymerizations have been determined. Quantitative nucleophilic substitution of the tosylate-moiety is demonstrated for several examples. This new structure provides access to a library of functionalized polyethers that cannot be synthesized by conventional oxyanionic polymerization.

Lewis Pair Polymerization of Epoxides via Zwitterionic Species as a Route to High-Molar-Mass Polyethers

A dual catalytic setup based on N-heterocyclic olefins (NHOs) and magnesium bis(hexamethyldisilazide) (Mg(HMDS)₂ ) was used to prepare poly(propylene oxide) with a molar mass (M_n ) >500 000 g mol^-1 , in some cases even >10⁶  g mol^-1 , as determined by GPC/light scattering. This is achieved by combining the rapid polymerization characteristics of a zwitterionic, Lewis pair type mechanism with the efficient epoxide activation by the Mg^II species. Transfer-to-monomer, traditionally frustrating attempts at synthesizing polyethers with a high degree of polymerization, is practically removed as a limiting factor by this approach. NMR and MALDI-ToF MS experiments reveal key aspects of the proposed mechanism, whereby the polymerization is initiated via nucleophilic attack by the NHO on the activated monomer, generating a zwitterionic species. This strategy can also be extended to other epoxides, including functionalized monomers.

N-Heterocyclic Olefin Catalysis for the Ring Opening of Cyclic Amidine Compounds: A Pathway to the Synthesis of ε-Caprolactam- and γ-Lactam-Derived Amines

For the first time, 1,2-dimethyl-3-ethylimidazolium iodide (1a) catalyzes the ring opening of the bicyclic amidine system of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene) or DBN (1,5-diazabicyclo[4.3.0]non-5-ene) on reaction with aldehydes. The mechanism here proposed involves an N-heterocyclic olefin (NHO) catalytic species that acts as a nucleophile to promote the cyclic amidine ring opening. The resulting ε-caprolactam- and γ-lactam-derived imines were obtained in moderate to excellent yields (28-99%) and reduced to the corresponding amines by sodium borohydride. Confirmation of the imine product was achieved via single-crystal X-ray diffraction studies.

N-Heterocyclic Carbenes in Materials Chemistry

N-Heterocyclic carbenes (NHCs) have become one of the most widely studied class of ligands in molecular chemistry and have found applications in fields as varied as catalysis, the stabilization of reactive molecular fragments, and biochemistry. More recently, NHCs have found applications in materials chemistry and have allowed for the functionalization of surfaces, polymers, nanoparticles, and discrete, well-defined clusters. In this review, we provide an in-depth look at recent advances in the use of NHCs for the development of functional materials.

Equilibrium Coordination of NHCs to Si(IV) Species and Donor Exchange in Donor-Acceptor Stabilized Si(II) and Ge(II) Compounds

We report the reversible coordination of the N-heterocyclic carbene (NHC), NHC ^iPr₂Me₂ (NHC ^iPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene), to silicon(IV)-halides, SiCl₄, MeSiCl₃, Me₂SiCl₂, and Me₃SiCl. Predicted as well as experimentally determined thermodynamic parameters of these equilibria confirm that the complexation constant increases with the Lewis acidity of the silicon halides. In contrast, the more σ-donating N-heterocyclic carbene, NHC^Me₄ (NHC^Me₄ = 1,3,4,5-tetramethylimidazol-2-ylidene), does not show any signs of dissociation from the corresponding SiCl₄ and Me₂SiCl₂ adducts even at higher temperatures. As a consequence, NHC ^iPr₂Me₂ in donor-acceptor stabilized Si(II)- and Ge(II)-dimethyl complexes, NHC ^iPr₂Me₂·GeMe₂·Fe(CO)₄ and NHC ^iPr₂Me₂·SiMe₂·Fe(CO)₄, is readily replaced by NHC^Me₄.