Influencing ionic conductivity and mechanical properties of ionic liquid polymer electrolytes by designing the chemical monomer structure

Polymeric single chloride-ion conductor networks based on acrylic imidazolium chloride ionic liquid monomers AACXImCYCl as reported previously are prepared. The chemical structure of the polymers is varied with respect to the acrylic substituents (alkyl spacer and alkyl substituent in the imidazolium ring). The networks are examined in detail with respect to the influence of the chemical structure on the resulting properties including thermal behavior, rheological behavior, swelling behavior, and ionic conductivity. The ionic conductivities increase (by two orders of magnitude from 10-6 to 10-4 S·cm-1 with increasing temperature), while the complex viscosities of the polymer networks decrease simultaneously. After swelling in water for 1 week the ionic conductivity reaches values of 10-2 S·cm-1. A clear influence of the spacer and the crosslinker content on the glass transition temperature was shown for the first time in these investigations. With increasing crosslinker content, the Tg values and the viscosities of the networks increase. With increasing spacer length, the Tg values decrease, but the viscosities increase with increasing temperature. The results reveal that the materials represent promising electrolytes for batteries, as proven by successful charging/discharging of a p(TEMPO-MA)/zinc battery over 350 cycles.

Aqueous Redox Flow Batteries: Small Organic Molecules for the Positive Electrolyte Species

There are a number of critical requirements for electrolytes in aqueous redox flow batteries. This paper reviews organic molecules that have been used as the redox-active electrolyte for the positive cell reaction in aqueous redox flow batteries. These organic compounds are centred around different organic redox-active moieties such as the aminoxyl radical (TEMPO and N-hydroxyphthalimide), carbonyl (quinones and biphenols), amine (e. g., indigo carmine), ether and thioether (e. g., thianthrene) groups. We consider the key metrics that can be used to assess their performance: redox potential, operating pH, solubility, redox kinetics, diffusivity, stability, and cost. We develop a new figure of merit - the theoretical intrinsic power density - which combines the first four of the aforementioned metrics to allow ranking of different redox couples on just one side of the battery. The organic electrolytes show theoretical intrinsic power densities which are 2-100 times larger than that of the VO2+ /VO2 + couple, with TEMPO-derivatives showing the highest performance. Finally, we survey organic positive electrolytes in the literature on the basis of their redox-active moieties and the aforementioned figure of merit.

Life cycle thinking and safe-and-sustainable-by-design approaches for the battery innovation landscape

Developments in battery technology are essential for the energy transition and need to follow the framework for safe-and-sustainable-by-design (SSbD) materials, chemicals, products, and processes as set by the EU. SSbD is a broad approach that ensures that chemicals/advanced materials/products/services are produced and used in a way to avoid harm to humans and the environment. Technical and policy-related literature was surveyed for battery technologies and recommendations were provided for a broad SSbD approach that remains firmly grounded in Life Cycle Thinking principles. The approach integrates functional performance and sustainability (safety, social, environmental, and economic) aspects throughout the life cycle of materials, products, and processes, and evaluates how their interactions reflect on SSbD parameters. 22 different types of batteries were analyzed in a life cycle thinking approach for criticality, toxicity/safety, environmental and social impact, circularity, functionality, and cost to ensure battery innovation has a green and sustainable purpose to avoid unintended consequences.

Charge-transport kinetics of dissolved redox-active polymers for rational design of flow batteries

Charge-transport kinetics of redox-active polymers is essential in designing electrochemical devices. We formulate the homogeneous and heterogeneous charge-transfer processes of the redox-active polymers dissolved in electrolytes. The critical electrochemical parameters, the apparent diffusion coefficient of charge transport (D _app) and standard electrochemical reaction constant (k ⁰), are estimated by considering the physical diffusion D _phys of polymer chains (D _app, k ⁰ ∝ D _phys). The models are validated with previously reported compounds and newly synthesized hydrophilic macromolecules. Solution-type cells are examined to analyze their primary responses from the electrochemical viewpoints.

Conjugate-Driven Electron Density Delocalization of Piperidine Nitroxyl Radical for Stable Aqueous Zinc Hybrid Flow Batteries

Stable and soluble redox-active nitroxyl radicals are highly desired for high-capacity and long-life aqueous zinc hybrid flow batteries (AZHFBs). Here we report a "π-π" conjugated imidazolium and "p-π" conjugated acetylamino co-functionalized 2,2,6,6-tetramethylpiperidine-N-oxyl (MIAcNH-TEMPO) as stable catholyte for AZHFBs. The incorporation of double-conjugate substituents could delocalize the electron density of the N-O head and thus remarkably stabilize the radical and oxoammonium forms of TEMPO, avoiding the side reaction of ring-opening. Consequently, the applied MIAcNH-TEMPO/Zn AZHFB demonstrates the hardly time-dependent stability with a constant capacity retention of 99.95 % per day over 16.7 days at a high concentration catholyte of 1.5 M and high current density of 50 mA cm^-2 . This proposed molecular engineering strategy based on electron density regulation of redox-active structures displays an attractive efficacy and thus represents a remarkable advance in high-performance AZHFBs.

Key Features of TEMPO-Containing Polymers for Energy Storage and Catalytic Systems

The need for environmentally benign portable energy storage drives research on organic batteries and catalytic systems. These systems are a promising replacement for commonly used energy storage devices that rely on limited resources such as lithium and rare earth metals. The redox-active TEMPO (2,2,6,6-tetramethylpiperidin-1-oxyl-4-yl) fragment is a popular component of organic systems, as its benefits include remarkable electrochemical performance and decent physical properties. TEMPO is also known to be an efficient catalyst for alcohol oxidation, oxygen reduction, and various complex organic reactions. It can be attached to various aliphatic and conductive polymers to form high-loading catalysis systems. The performance and efficiency of TEMPO-containing materials strongly depend on the molecular structure, and thus rational design of such compounds is vital for successful implementation. We discuss synthetic approaches for producing electroactive polymers based on conductive and non-conductive backbones with organic radical substituents, fundamental aspects of electrochemistry of such materials, and their application in energy storage devices, such as batteries, redox-flow cells, and electrocatalytic systems. We compare the performance of the materials with different architectures, providing an overview of diverse charge interactions for hybrid materials, and presenting promising research opportunities for the future of this area.

Nanoscale Hybrid Electrolytes with Viscosity Controlled Using Ionic Stimulus for Electrochemical Energy Conversion and Storage

As renewable energy is rapidly integrated into the grid, the challenge has become storing intermittent renewable electricity. Technologies including flow batteries and CO₂ conversion to dense energy carriers are promising storage options for renewable electricity. To achieve this technological advancement, the development of next generation electrolyte materials that can increase the energy density of flow batteries and combine CO₂ capture and conversion is desired. Liquid-like nanoparticle organic hybrid materials (NOHMs) composed of an inorganic core with a tethered polymeric canopy (e.g., polyetheramine (HPE)) have a capability to bind chemical species of interest including CO₂ and redox-active species. In this study, the unique response of NOHM-I-HPE-based electrolytes to salt addition was investigated, including the effects on solution viscosity and structural configurations of the polymeric canopy, impacting transport behaviors. The addition of 0.1 M NaCl drastically lowered the viscosity of NOHM-based electrolytes by up to 90%, reduced the hydrodynamic diameter of NOHM-I-HPE, and increased its self-diffusion coefficient, while the ionic strength did not alter the behaviors of untethered HPE. This study is the first to fundamentally discern the changes in polymer configurations of NOHMs induced by salt addition and provides a comprehensive understanding of the effect of ionic stimulus on their bulk transport properties and local dynamics. These insights could be ultimately employed to tailor transport properties for a range of electrochemical applications.

Electronic and Spintronic Open-Shell Macromolecules, Quo Vadis?

Open-shell macromolecules (i.e., polymers containing radical sites either along their backbones or at the pendant sites of repeat units) have attracted significant attention owing to their intriguing chemical and physical (e.g., redox, optoelectronic, and magnetic) properties, and they have been proposed and/or implemented in a wide range of potential applications (e.g., energy storage devices, electronic systems, and spintronic modules). These successes span multiple disciplines that range from advanced macromolecular chemistry through nanoscale structural characterization and on to next-generation solid-state physics and the associated devices. In turn, this has allowed different scientific communities to expand the palette of radical-containing polymers relatively quickly. However, critical gaps remain on many fronts, especially regarding the elucidation of key structure-property-function relationships that govern the underlying electrochemical, optoelectronic, and spin phenomena in these materials systems. Here, we highlight vital developments in the history of open-shell macromolecules to explain the current state of the art in the field. Moreover, we provide a critical review of the successes and bring forward open opportunities that, if solved, could propel this class of materials in a meaningful manner. Finally, we provide an outlook to address where it seems most likely that open-shell macromolecules will go in the coming years. Our considered view is that the future of radical-containing polymers is extremely bright and the addition of talented researchers with diverse skills to the field will allow these materials and their end-use devices to have a positive impact on the global science and technology enterprise in a relatively rapid manner.

Nitroxide radical polymers for emerging plastic energy storage and organic electronics: fundamentals, materials, and applications

Increasing demand for portable and flexible electronic devices requires seamless integration of the energy storage system with other electronic components. This ever-growing area has urged on the rapid development of new electroactive materials that not only possess excellent electrochemical properties but hold capabilities to be fabricated to desired shapes. Ideally, these new materials should have minimal impact on the environment at the end of their life. Nitroxide radical polymers (NRPs) with their remarkable electrochemical and physical properties stand out from diverse organic redox systems and have attracted tremendous attention for their identified applications in plastic energy storage and organic devices. In this review, we present a comprehensive summary of NRPs with respect to the fundamental electrochemical properties, design principles and fabrication methods for different types of energy storage systems and organic electronic devices. While highlighting some exciting progress on charge transfer theory and emerging applications, we end up with a discussion on the challenges and opportunities regarding the future directions of this field.

Redox-Active Aqueous Microgels for Energy Storage Applications

The search for new environmental-friendly materials for energy storage is ongoing. In the presented paper, we propose polymer microgels as a new class of redox-active colloids (RACs). The microgel stable colloids are perspective low-viscosity fluids for advanced flow batteries with high volumetric energy density. In this research, we describe the procedure for the anchoring of 4-amino-2,2,6,6-tetramethylpiperidine-1-oxyl (4-amino-TEMPO) redox-active sites to the polymeric chains of water-soluble microgels based on poly(N-isopropylacrylamide)-poly(acrylic acid) interpenetrating networks. Using cyclic voltammetry and EPR spectroscopy, we show that ca. 14% of 4-amino-TEMPO groups retain electroactive properties and demonstrate the reversible redox response. It allows achieving a stable capacity of 2.5 mAh/g, enabling the low-viscous catholyte with a capacity of more than 100 mAh/L.

Effect of Electrolyte Additives on the Water Transfer Behavior for Alkaline Zinc-Iron Flow Batteries

Alkaline zinc-iron flow batteries (AZIFBs) are a very promising candidate for electrochemical energy storage. The electrolyte plays an important role in determining the energy density and reliability of a battery. The substantial water migration through a membrane during cycling is one of the critical issues that affect the reliability and performance of an AZIFB. In this work, it has been proven that the reason for water migration in AZIFBs is the synergetic effect of concentration gradient, different ionic strengths of negolyte and posolyte, and the electric field. To address the issue of water migration in AZIFBs, a series of additives are employed and the effects of additives on the water transfer behavior and electrochemical performance of AZIFBs are investigated in detail. The results indicate that all investigated additives can suppress water migration through a polybenzimidazole membrane because of the shrunken gap of osmotic pressure and ionic strength between negolyte and posolyte. Moreover, organic additives such as glucose can decrease battery performance because of the increased polarizability of the electrode, whereas inorganic additives such as Na₂SO₄ demonstrate no distinct effect on battery performance. Specifically, an AZIFB that employs Na₂SO₄ as an additive in the negative electrolyte can afford a Coulombic efficiency of ∼99% and a voltage efficiency of ∼88% for 120 cycles at 80 mA cm^-2, together with a good effect for inhibiting water migration behavior. This paper presents an effective way to suppress water migration and increase the reliability of AZIFBs.

Radical Charge Population and Energy: Critical Role in Redox Potential and Cycling Life of Piperidine Nitroxyl Radical Cathodes in Aqueous Zinc Hybrid Flow Batteries

Redox-active 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) derivatives have recently been investigated to expand the choice of catholyte for aqueous flow batteries (AFBs). However, the effects of substituent R in 4-position on redox potential and corresponding capacity fading mechanism are still unclear. Here, we conduct comparative studies of four R-TEMPO with R = -OH, -NH₂, -COOH, and -NHCOCH₃ in zinc hybrid AFBs. Experimental and theoretical analyses reveal that low-radical head charge population sum and radical energy, depending on R in 4-position, play a critical role in enhancing redox potential and cycling life of R-TEMPO. The electronic effect brought along by N-acetyl could redistribute the charge and lower systematic energy, making the ring-opening joint sturdy and therefore suppress the side reactions. Accordingly, the 4-NHCOCH₃-TEMPO/Zn battery achieves a high capacity retention of >99.65%/day and an open-circuit voltage of 1.71 V. Our findings on the effects of substituent are greatly anticipated to boost the high-energy density, long-life, and eco-friendly TEMPO-based AFBs.

A pH-Neutral, Aqueous Redox Flow Battery with a 3600-Cycle Lifetime: Micellization-Enabled High Stability and Crossover Suppression

Redox-flow batteries (RFBs) are a highly promising large-scale energy storage technology for mitigating the intermittent nature of renewable energy sources. Here, the design and implementation of a micellization strategy in an anthraquinone-based, pH-neutral, nontoxic, and metal-free aqueous RFB is reported. The micellization strategy (1) improves stability by protecting the redox-active anthraquinone core with a hydrophilic poly(ethylene glycol) shell and (2) increases the overall size to mitigate the crossover issue through a physical blocking mechanism. Paired with a well-established potassium ferrocyanide catholyte, the micelle-based RFB displayed an excellent capacity retention of 90.7 % after 3600 charge/discharge cycles (28.3 days), corresponding to a capacity retention of 99.67 % per day and 99.998 % per cycle. The mechanistic studies of redox-active materials were also conducted and indicated the absence of side reactions commonly observed in other anthraquinone-based RFBs. The outstanding performance of the RFB demonstrates the effectiveness of the micellization strategy for enhancing the performance of organic material-based aqueous RFBs.

Structure-properties relationship for energy storage redox polymers: a review

Redox-active polymers among the energy storage materials (ESMs) are very attractive due to their exceptional advantages such as high stability and processability as well as their simple manufacturing. Their applications are found to useful in electric vehicle, ultraright computers, intelligent electric gadgets, mobile sensor systems, and portable intelligent clothing. They are found to be more efficient and advantageous in terms of superior processing capacity, quick loading unloading, stronger security, lengthy life cycle, versatility, adjustment to various scales, excellent fabrication process capabilities, light weight, flexible, most significantly cost efficiency, and non-toxicity in order to satisfy the requirement for the usage of these potential applications. The redox-active polymers are produced through organic synthesis, which allows the design and free modification of chemical constructions, which allow for the structure of organic compounds. The redox-active polymers can be finely tuned for the desired ESMs applications with their chemical structures and electrochemical properties. The redox-active polymers synthesis also offers the benefits of high-scale, relatively low reaction, and a low demand for energy. In this review we discussed the relationship between structural properties of different polymers for solar energy and their energy storage applications.

Organic Cathode Materials for Rechargeable Zinc Batteries: Mechanisms, Challenges, and Perspectives

Energy and environmental issues have given rise to the development of advanced energy-storage devices worldwide. Electrochemical energy technologies, such as rechargeable batteries, are considered to be the most reliable and efficient candidates. Compared with other batteries, zinc-based batteries seem promising due to their advantages, including inherent safety, cost-effectiveness, and environmentally friendliness. As potential alternatives to conventional inorganic cathodes, organic cathodes for Zn-organic batteries have become a hot topic for research, owing to their favorable characteristics, such as easy structure design, controllable synthesis, and environmental benignancy. Herein, a systematic overview on the fundamentals of organic cathode materials for zinc batteries, including material design, electrochemical mechanisms, technical advances, and challenging analysis, is provided. Furthermore, perspectives and corresponding research directions are offered to facilitate the future development of organic cathode materials for zinc batteries toward practical applications.

Electrolyte Lifetime in Aqueous Organic Redox Flow Batteries: A Critical Review

Aqueous organic redox flow batteries (RFBs) could enable widespread integration of renewable energy, but only if costs are sufficiently low. Because the levelized cost of storage for an RFB is a function of electrolyte lifetime, understanding and improving the chemical stability of active reactants in RFBs is a critical research challenge. We review known or hypothesized molecular decomposition mechanisms for all five classes of aqueous redox-active organics and organometallics for which cycling lifetime results have been reported: quinones, viologens, aza-aromatics, iron coordination complexes, and nitroxide radicals. We collect, analyze, and compare capacity fade rates from all aqueous organic electrolytes that have been utilized in the capacity-limiting side of flow or hybrid flow/nonflow cells, noting also their redox potentials and demonstrated concentrations of transferrable electrons. We categorize capacity fade rates as being "high" (>1%/day), "moderate" (0.1-1%/day), "low" (0.02-0.1%/day), and "extremely low" (≤0.02%/day) and discuss the degree to which the fade rates have been linked to decomposition mechanisms. Capacity fade is observed to be time-denominated rather than cycle-denominated, with a temporal rate that can depend on molecular concentrations and electrolyte state of charge through, e.g., bimolecular decomposition mechanisms. We then review measurement methods for capacity fade rate and find that simple galvanostatic charge-discharge cycling is inadequate for assessing capacity fade when fade rates are low or extremely low and recommend refining methods to include potential holds for accurately assessing molecular lifetimes under such circumstances. We consider separately symmetric cell cycling results, the interpretation of which is simplified by the absence of a different counter-electrolyte. We point out the chemistries with low or extremely low established fade rates that also exhibit open circuit potentials of 1.0 V or higher and transferrable electron concentrations of 1.0 M or higher, which are promising performance characteristics for RFB commercialization. We point out important directions for future research.

Advanced Materials for Zinc-Based Flow Battery: Development and Challenge

Zinc-based flow batteries (ZFBs) are well suitable for stationary energy storage applications because of their high energy density and low-cost advantages. Nevertheless, their wide application is still confronted with challenges, which are mainly from advanced materials. Therefore, research on advanced materials for ZFBs in terms of electrodes, membranes, and electrolytes as well as their chemistries are of the utmost importance. Herein, the focus is on the scientific understandings of the fundamental design of these advanced materials and their chemistries in relation to the battery performance. The principles of using different materials in different ZFB technologies, the functions and structure of the materials, and further material improvements are discussed in detail. Finally, the challenges and prospects of ZFBs are summarized as well. This review provides valuable instruction on how to design and develop new materials as well as new chemistries for ZFBs.

Block copolymers for supercapacitors, dielectric capacitors and batteries

Block copolymer-based energy storage emerges as an active interdisciplinary research field. This topical review presents a survey of the recent advances in block copolymers for energy storage. In the first section, we introduce the background of electrochemical energy storage and block copolymer thermodynamics. In the second section, we discuss the current understandings of block copolymer chemistry, processing, pore size, and ionic conductivity. In the third section, we summarize the design principles and state-of-the-art applications of block copolymers in three energy storage devices, namely, supercapacitors, dielectric capacitors, and batteries. Lastly, we present our perspectives on future possible breakthroughs and associated challenges that are essential to propel the development of advanced block copolymers for energy storage. We expect the review to encourage innovative studies on integrating block copolymers into energy storage applications.

Inhibition of Zinc Dendrite Growth in Zinc-Based Batteries

Zinc deposition and dissolution is a significant process in zinc-based batteries. During this process, the formation of zinc dendrites is pervasive, which leads to the loss of efficiency and capacity of batteries. The continually growing dendrites will finally pierce the separator and cause the batteries to short circuit. Thus, employing effective methods to inhibit the formation and growth of zinc dendrites is vital for the practical application of zinc-based batteries. This Minireview first clarifies the formation and growth principles of zinc dendrites. Then, the research and development of methods to solve the problem of zinc dendrites are reviewed, including ways to suppress the further formation and growth of dendrites as far as possible, to minimize the adverse effects of dendrites, along with ways to produce dendrite-free deposition processes. The mechanisms, advantages, drawbacks, and perspectives of these methods are illustrated. Thus, this overview of these methods will aid understanding of the formation process of zinc dendrites and provide an extensive, comprehensive, and professional reference to resolve the problem of zinc dendrites completely.

Stable Radical Materials for Energy Applications

Although less studied than their closed-shell counterparts, materials containing stable open-shell chemistries have played a key role in many energy storage and energy conversion devices. In particular, the oxidation-reduction (redox) properties of these stable radicals have made them a substantial contributor to the progress of organic batteries. Moreover, the use of radical-based materials in photovoltaic devices and thermoelectric systems has allowed for these emerging molecules to have impacts in the energy conversion realm. Additionally, the unique doublet states of radical-based materials provide access to otherwise inaccessible spin states in optoelectronic devices, offering many new opportunities for efficient usage of energy in light-emitting devices. Here, we review the current state of the art regarding the molecular design, synthesis, and application of stable radicals in these energy-related applications. Finally, we point to fundamental and applied arenas of future promise for these designer open-shell molecules, which have only just begun to be evaluated in full.

Self-reporting and refoldable profluorescent single-chain nanoparticles

We pioneer the formation of self-reporting and refoldable profluorescent single-chain nanoparticles (SCNPs) via the light-induced reaction (λ_max = 320 nm) of nitroxide radicals with a photo-active crosslinker.

We pioneer the formation of self-reporting and refoldable profluorescent single-chain nanoparticles (SCNPs) via the light-induced reaction (λ_max = 320 nm) of nitroxide radicals with a photo-active crosslinker. Whereas the tethered nitroxide moiety in these polymers fully quenches the luminescence (i.e. fluorescence) of the aromatic backbone, nitroxide trapping of a transient C-radical leads to the corresponding closed shell alkoxyamine thereby restoring luminescence of the folded SCNP. Hence, the polymer in the folded state is capable of emitting light, while in the non-folded state the luminescence is silenced. Under oxidative conditions the initially folded SCNPs unfold, resulting in luminescence switch-off and the reestablishment of the initial precursor polymer. Critically, we show that the luminescence can be repeatedly silenced and reactivated. Importantly, the self-reporting character of the SCNPs was followed by size-exclusion chromatography (SEC), dynamic light scattering (DLS), fluorescence, electron paramagnetic resonance (EPR), nuclear magnetic resonance (NMR) and diffusion ordered NMR spectroscopy (DOSY).

Molecular engineering of organic electroactive materials for redox flow batteries

With high scalability and independent control over energy and power, redox flow batteries (RFBs) stand out as an important large-scale energy storage system.

Nitroxide radical polymers – a versatile material class for high-tech applications

A comprehensive summary of synthetic strategies for the preparation of nitroxide radical polymer materials and a state-of-the-art perspective on their latest and most exciting applications.

One-Step Cationic Grafting of 4-Hydroxy-TEMPO and its Application in a Hybrid Redox Flow Battery with a Crosslinked PBI Membrane

By using a one-step epoxide ring-opening reaction between 4-hydroxy-2,2,6,6-tetramethylpiperidine 1-oxyl (4-hydroxy-TEMPO) and glycidyltrimethylammonium cation (GTMA⁺ ), we synthesized a cation-grafted TEMPO (g⁺ -TEMPO) and studied its electrochemical performance against a Zn²⁺ /Zn anode in a hybrid redox flow battery. To conduct Cl^- counter anions, a crosslinked methylated polybenzimidazole (PBI) membrane was prepared and placed between the catholyte and anolyte. Compared to 4-hydroxy-TEMPO, the positively charged g⁺ - TEMPO exhibits enhanced reaction kinetics. Moreover, flow battery tests with g⁺ -TEMPO show improved Coulombic, voltage, and energy efficiencies and cycling stability over 140 cycles. Crossover of active species through the membrane was not detected.

High resolution mass spectrometric access to nitroxide containing polymers

We introduce a mass spectrometric access route to nitroxide containing polymers via high resolution electrospray ionization mass spectrometry (HR ESI MS), a polymer class that is – due to the presence of unpaired spins – highly challenging to analyze via NMR techniques.

Redox-Flow Batteries: From Metals to Organic Redox-Active Materials

Research on redox-flow batteries (RFBs) is currently experiencing a significant upturn, stimulated by the growing need to store increasing quantities of sustainably generated electrical energy. RFBs are promising candidates for the creation of smart grids, particularly when combined with photovoltaics and wind farms. To achieve the goal of "green", safe, and cost-efficient energy storage, research has shifted from metal-based materials to organic active materials in recent years. This Review presents an overview of various flow-battery systems. Relevant studies concerning their history are discussed as well as their development over the last few years from the classical inorganic, to organic/inorganic, to RFBs with organic redox-active cathode and anode materials. Available technologies are analyzed in terms of their technical, economic, and environmental aspects; the advantages and limitations of these systems are also discussed. Further technological challenges and prospective research possibilities are highlighted.