Comparison of rhenium-porphyrin dyads for CO2 photoreduction: photocatalytic studies and charge separation dynamics studied by time-resolved IR spectroscopy

Synthesis and Photocatalytic CO2 Reduction of a Cyclic Zinc(II) Porphyrin Trimer with an Encapsulated Rhenium(I) Bipyridine Tricarbonyl Complex

We previously reported a cyclic Zn(II) porphyrin trimer in which three Zn porphyrins are alternately bridged by three 2,2'-bipyridine (bpy) moieties, enabling the encapsulation of metal complexes within the nanopore formed by the Zn porphyrins. In this study, we introduced a [Re(CO)3 Br] fragment into one of the bpy moieties of the cyclic trimer to form the catalytic Re(4,4'-R2 -bpy)(CO)3 Br center (R=methyl ester). The ester groups (R) play an important role in the synthesis of the cyclic structure. However, it was observed that these ester groups significantly deactivated the photocatalytic CO2 reduction reaction. Therefore, we converted the ester groups with a suitable reducing reagent into hydroxymethyl groups, followed by acetylation to form acetoxymethyl groups. This modification remarkably enhanced the photocatalytic activity of the cyclic trimer=Re complex system for CO2 reduction. Moreover, in the modified system, the presence of the Re complex induced room-temperature phosphorescence of the Zn porphyrin. The phosphorescence was significantly quenched by 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole, indicating that efficient electron transfer mediated by the excited triplet state of the Zn porphyrin occurs during the photocatalytic CO2 reduction.

Cobalt-based tripodal complexes as molecular catalysts for photocatalytic CO2 reduction

Construction of artificial photosynthetic systems including CO2 reduction is a promising pathway to produce carbon-neutral fuels and mitigate the greenhouse effect concurrently. However, the exploitation of earth-abundant catalysts for photocatalytic CO2 reduction remains a fundamental challenge, which can be assisted by a systematic summary focusing on a specific catalyst family. Cobalt-based complexes featuring tripodal ligands should merit more insightful discussion and summarization, as they are one of the most examined catalyst families for CO2 photoreduction. In this feature article, the key developments of cobalt-based tripodal complexes as molecular catalysts for light-driven CO2 reduction are discussed to offer an upcoming perspective, analyzing the present progress in electronic/steric tuning through ligand modification and dinuclear design to achieve a synergistic effect, as well as the bottlenecks for further development.

Significance of the connecting position between Zn(ii) porphyrin and Re(i) bipyridine tricarbonyl complex units in dyads for room-temperature phosphorescence and photocatalytic CO2 reduction: unexpected enhancement by triethanolamine in catalytic activity

We synthesized three new dyads composed of a Zn porphyrin and fac-Re(bpy)(CO)3Br (bpy = 2,2'-bipyridine) units, ZnP-nBpy[double bond, length as m-dash]ReBr (n = 4, 5, and 6), in which the porphyrin is directly connected at the meso-position through the 4-, 5-, or 6-position of the bpy. We investigated the relationships between the connecting positions and the photophysical properties as well as catalytic activity in the CO2 reduction reaction. The dyad connected through the 6-position, ZnP-6Bpy[double bond, length as m-dash]ReBr, showed obvious phosphorescence with a lifetime of 280 μs at room temperature, in N,N-dimethylacetamide (DMA), whereas the other two dyads showed almost no phosphorescence under the same conditions. The photocatalytic CO2 reduction reactions in DMA using 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole as the electron donor and the three dyads ZnP-nBpy[double bond, length as m-dash]ReBr selectively produced CO with similar initial rates, but the durabilities were low. The addition of triethanolamine (TEOA) suppressed the decomposition of dyads, improving their durabilities and reaction efficiencies. In particular, ZnP-5Bpy[double bond, length as m-dash]ReBr was remarkably improved-it gave the highest durability and reaction efficiency among the three dyads; the reaction quantum yield reached 24%. The reason for this significant activity is no accumulation of electrons on the Zn porphyrin in ZnP-5Bpy[double bond, length as m-dash]ReBr, which would be caused by dual interactions of TEOA with the Re and Zn ions in the dyad. As the highest catalytic activity was observed in ZnP-5Bpy[double bond, length as m-dash]ReBr among the three dyads, which had no room-temperature phosphorescence (RTP), the catalytic activities and RTP properties are considered independent, but they are greatly influenced by the connecting positions on the bpy ligand in ZnP-nBpy[double bond, length as m-dash]ReBr.

Precious-Metal-Free CO2 Photoreduction Boosted by Dynamic Coordinative Interaction between Pyridine-Tethered Cu(I) Sensitizers and a Co(II) Catalyst

Improving the photocatalytic efficiency of a fully noble-metal-free system for CO₂ reduction remains a fundamental challenge, which can be accomplished by facilitating electron delivery as a consequence of exploiting intermolecular interactions. Herein, we have designed two Cu(I) photosensitizers with different pyridyl pendants at the phenanthroline moiety to enable dynamic coordinative interactions between the sensitizers and a cobalt macrocyclic catalyst. Compared to the parent Cu(I) photosensitizer, one of the pyridine-tethered derivatives boosts the apparent quantum yield up to 76 ± 6% at 425 nm for selective (near 99%) CO₂-to-CO conversion. This value is nearly twice that of the parent system with no pyridyl pendants (40 ± 5%) and substantially surpasses the record (57%) of the noble-metal-free systems reported so far. This system also realizes a maximum turnover number of 11 800 ± 1400. In contrast, another Cu(I) photosensitizer, in which the pyridine substituents are directly linked to the phenanthroline moiety, is inactive. The above behavior and photocatalytic mechanism are systematically elucidated by transient fluorescence, transient absorption, transient X-ray absorption spectroscopies, and quantum chemical calculations. This work highlights the advantage of constructing coordinative interactions to fine-tune the electron transfer processes within noble-metal-free systems for CO₂ photoreduction.

Boosting CO2 photoreduction by π-π-induced preassembly between a Cu(I) sensitizer and a pyrene-appended Co(II) catalyst

The design of a highly efficient system for CO2 photoreduction fully based on earth-abundant elements presents a challenge, which may be overcome by installing suitable interactions between photosensitizer and catalyst to expedite the intermolecular electron transfer. Herein, we have designed a pyrene-decorated Cu(I) complex with a rare dual emission behavior, aiming at additional π-interaction with a pyrene-appended Co(II) catalyst for visible light-driven CO2-to-CO conversion. The results of 1H NMR titration, time-resolved fluorescence/absorption spectroscopies, quantum chemical simulations, and photocatalytic experiments clearly demonstrate that the dynamic π-π interaction between sensitizer and catalyst is highly advantageous in photocatalysis by accelerating the intermolecular electron transfer rate up to 6.9 × 105 s-1, thus achieving a notable apparent quantum yield of 19% at 425 nm with near-unity selectivity. While comparable to most earth-abundant molecular systems, this value is over three times of the pyrene-free system (6.0%) and far surpassing the benchmarking Ru(II) tris(bipyridine) (0.3%) and Ir(III) tris(2-phenylpyridine) (1.4%) photosensitizers under parallel conditions.

Advancements and Challenges in Reductive Conversion of Carbon Dioxide via Thermo-/Photocatalysis

Carbon dioxide (CO₂) is the major greenhouse gas and also an abundant and renewable carbon resource. Therefore, its chemical conversion and utilization are of great attraction for sustainable development. Especially, reductive conversion of CO₂ with energy input has become a current hotspot due to its ability to access fuels and various important chemicals. Nowadays, the controllable CO₂ hydrogenation to formic acid and alcohols using sustainable H₂ resources has been regarded as an appealing solution to hydrogen storage and CO₂ accumulation. In addition, photocatalytic CO₂ reduction to CO also provides a potential way to utilize this greenhouse gas efficiently. Besides direct CO₂ hydrogenation, CO₂ reductive functionalization integrates CO₂ reduction with subsequent C-X (X = N, S, C, O) bond formation and indirect transformation strategies, enlarging the diverse products derived from CO₂ and promoting CO₂ reductive conversion into a new stage. In this Perspective, the progress and challenges of CO₂ reductive conversion, including hydrogenation, reductive functionalization, photocatalytic reduction, and photocatalytic reductive functionalization are summarized and discussed along with the key issues and future trends/directions in this field. We hope this Perspective can evoke intense interest and inspire much innovation in the promise of CO₂ valorization.

Co-facial π-π Interaction Expedites Sensitizer-to-Catalyst Electron Transfer for High-Performance CO2 Photoreduction

The sunlight-driven reduction of CO₂ into carbonaceous fuels can lower the atmospheric CO₂ concentration and provide renewable energy simultaneously, attracting scientists to design photocatalytic systems for facilitating this process. Significant progress has been made in designing high-performance photosensitizers and catalysts in this regard, and further improvement can be realized by installing additional interactions between the abovementioned two components, however, the design strategies and mechanistic investigations on such interactions remain challenging. Here, we present the construction of molecular models for intermolecular π-π interactions between the photosensitizer and the catalyst, via the introduction of pyrene groups into both molecular components. The presence, types, and strengths of diverse π-π interactions, as well as their roles in the photocatalytic mechanism, have been examined by ¹H NMR titration, fluorescence quenching measurements, transient absorption spectroscopy, and quantum chemical simulations. We have also explored the rare dual emission behavior of the pyrene-appended iridium photosensitizer, of which the excited state can deliver the photo-excited electron to the pyrene-decorated cobalt catalyst at a fast rate of 2.60 × 10⁶ s^-1 via co-facial π-π interaction, enabling a remarkable apparent quantum efficiency of 14.3 ± 0.8% at 425 nm and a high selectivity of 98% for the photocatalytic CO₂-to-CO conversion. This research demonstrates non-covalent interaction construction as an effective strategy to achieve rapid CO₂ photoreduction besides a conventional photosensitizer/catalyst design.

Photochemistry of transition metal carbonyls

The purpose of this Tutorial Review is to outline the fundamental photochemistry of metal carbonyls, and to show how the advances in technology have increased our understanding of the detailed mechanisms, particularly how relatively simple experiments can provide deep understanding of complex problems. We recall some important early experiments that demonstrate the key principles underlying current research, concentrating on the binary carbonyls and selected substituted metal carbonyls. At each stage, we illustrate with examples from recent applications. This review first considers the detection of photochemical intermediates in three environments: glasses and matrices; gas phase; solution. It is followed by an examination of the theory underpinning these observations. In the final two sections, we briefly address applications to the characterization and behaviour of complexes with very labile ligands such as N₂, H₂ and alkanes, concentrating on key mechanistic points, and also describe some principles and examples of photocatalysis.

Porphyrins and phthalocyanines as biomimetic tools for photocatalytic H2 production and CO2 reduction

The increasing energy demand and environmental issues caused by the over-exploitation of fossil fuels render the need for renewable, clean, and environmentally benign energy sources unquestionably urgent. The zero-emission energy carrier, H₂ is an ideal alternative to carbon-based fuels especially when it is generated photocatalytically from water. Additionally, the photocatalytic conversion of CO₂ into chemical fuels can reduce the CO₂ emissions and have a positive environmental and economic impact. Inspired by natural photosynthesis, plenty of artificial photocatalytic schemes based on porphyrinoids have been investigated. This review covers the recent advances in photocatalytic H₂ production and CO₂ reduction systems containing porphyrin or phthalocyanine derivatives. The unique properties of porphyrinoids enable their utilization both as chromophores and as catalysts. The homogeneous photocatalytic systems are initially described, presenting the various approaches for the improvement of photosensitizing activity and the enhancement of catalytic performance at the molecular level. On the other hand, for the development of the heterogeneous systems, numerous methods were employed such as self-assembled supramolecular porphyrinoid nanostructures, construction of organic frameworks, combination with 2D materials and adsorption onto semiconductors. The dye sensitization on semiconductors opened the way for molecular-based dye-sensitized photoelectrochemical cells (DSPECs) devices based on porphyrins and phthalocyanines. The research in photocatalytic systems as discussed herein remains challenging since there are still many limitations making them unfeasible to be used at a large scale application before finding a large-scale application.

Photocatalytic CO2 reduction sensitized by a special-pair mimic porphyrin connected with a rhenium(i) tricarbonyl complex

Zn porphyrins with an imidazolyl group at the meso position generate a highly stable porphyrin dimer by complementary coordination from the imidazolyl to the Zn ion in noncoordinating solvents such as chloroform, which mimics the natural special pair in photosynthesis. In this work, we have synthesized an imidazolyl-substituted Zn porphyrin connected with a Re 2,2-bipyridine tricarbonyl complex as a CO₂ reduction catalyst via a p-phenylene linker, affording a homodimer with two Re complexes on both sides (ReDRe). The dimeric structure is easily dissociated into the corresponding monomers in coordinating solvents. Therefore, we prepared a mixture containing a heterodimer with the Re carbonyl complex on one side (ReD) by simple mixing with an imidazolyl Zn porphyrin and evaporating the solvent. Using the Grubbs catalyst, the subsequent olefin metathesis reaction of the mixture gave covalently linked porphyrin dimers through the allyloxy side chains, enabling the isolation of the stable hetero- (ReD′) and homo-dimers (ReD′Re) with gel permeation chromatography. The Zn porphyrin dimers have intense absorption bands in the visible light region and acted as good photosensitizers in photocatalytic CO₂ reduction in a mixture of N,N-dimethylacetamide and triethanolamine (5 : 1 v/v) containing 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole as the electron donor, giving CO with high selectivity and durability. Under irradiation with strong light intensity, the reaction rate in ReD′ exceeded that of the previous porphyrin Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> Re complex dyad, ZnP-phen=Re. For instance, after irradiation at 560 nm for 18 h, the turnover number (TON_CO) of ReD′ reached 2800, whereas the TON_CO of ZnP-phen=Re was 170. The high activity in the system using the porphyrin dimer originates from no accumulation of the one-electron reduced species of the porphyrin that inhibit light absorption due to the inner-filter effect.

An artificial special pair was connected with a Re 2,2-bipyridine tricarbonyl complex. The special pair derivative acted as a good photosensitizer in photocatalytic CO₂ reduction, giving CO with high selectivity and durability.

Promoting photocatalytic CO2 reduction through facile electronic modification of N-annulated perylene diimide rhenium bipyridine dyads

The development of CO₂ conversion catalysts has become paramount in the effort to close the carbon loop. Herein, we report the synthesis, characterization, and photocatalytic CO₂ reduction performance for a series of N-annulated perylene diimide (NPDI) tethered Re(bpy) supramolecular dyads [Re(bpy-C2-NPDI-R)], where R = –H, –Br, –CN, –NO₂, –OPh, –NH₂, or pyrrolidine (–NR₂). The optoelectronic properties of these Re(bpy-C2-NPDI-R) dyads were heavily influenced by the nature of the R-group, resulting in significant differences in photocatalytic CO₂ reduction performance. Although some R-groups (i.e. –Br and –OPh) did not influence the performance of CO₂ photocatalysis (relative to –H; TON_co ∼60), the use of an electron-withdrawing –CN was found to completely deactivate the catalyst (TON_co < 1) while the use of an electron-donating –NH₂ improved CO₂ photocatalysis four-fold (TON_co = 234). Despite being the strongest EWG, the –NO₂ derivative exhibited good photocatalytic CO₂ reduction abilities (TON_co = 137). Using a combination of CV and UV-vis-nIR SEC, it was elucidated that the –NO₂ derivative undergoes an in situ transformation to –NH₂ under reducing conditions, thereby generating a more active catalyst that would account for the unexpected activity. A photocatalytic CO₂ mechanism was proposed for these Re(bpy-C2-NPDI-R) dyads (based on molecular orbital descriptions), where it is rationalized that the photoexcitation pathway, as well as the electronic driving-force for NPDI²⁻ to Re(bpy) electron-transfer both significantly influence photocatalytic CO₂ reduction. These results help provide rational design principles for the future development of related supramolecular dyads.

Seven N-annulated perylene diimide tethered rhenium (2,2′-bipyridine) supramolecular dyads are evaluated as photocatalysts for the reduction for carbon dioxide, highlighting the importance of photoexcitation pathway and electronic driving-force.

Topology- and wavelength-governed CO2 reduction photocatalysis in molecular catalyst-metal–organic framework assemblies

Optimising catalyst materials for visible light-driven fuel production requires understanding complex and intertwined processes including light absorption and catalyst stability, as well as mass, charge, and energy transport. These phenomena can be uniquely combined (and ideally controlled) in porous host–guest systems. Towards this goal we designed model systems consisting of molecular complexes as catalysts and porphyrin metal–organic frameworks (MOFs) as light-harvesting and hosting porous matrices. Two MOF-rhenium molecule hybrids with identical building units but differing topologies (PCN-222 and PCN-224) were prepared including photosensitiser-catalyst dyad-like systems integrated via self-assembled molecular recognition. This allowed us to investigate the impact of MOF topology on solar fuel production, with PCN-222 assemblies yielding a 9-fold turnover number enhancement for solar CO₂-to-CO reduction over PCN-224 hybrids as well as a 10-fold increase compared to the homogeneous catalyst-porphyrin dyad. Catalytic, spectroscopic and computational investigations identified larger pores and efficient exciton hopping as performance boosters, and further unveiled a MOF-specific, wavelength-dependent catalytic behaviour. Accordingly, CO₂ reduction product selectivity is governed by selective activation of two independent, circumscribed or delocalised, energy/electron transfer channels from the porphyrin excited state to either formate-producing MOF nodes or the CO-producing molecular catalysts.

Two MOF molecular catalyst hybrids with differing topologies show mass and light transport governed photocatalysis. MOF-specific, irradiation wavelength-dependent product control is unlocked by switching between two energy/electron transfer channels.

Reticular-Chemistry-Inspired Supramolecule Design as a Tool to Achieve Efficient Photocatalysts for CO2 Reduction

Photocatalytic CO₂ reduction into C1 products is one of the most trending research subjects of current times as sustainable energy generation is the utmost need of the hour. In this review, we have tried to comprehensively summarize the potential of supramolecule-based photocatalysts for CO₂ reduction into C1 compounds. At the outset, we have thrown light on the inert nature of gaseous CO₂ and the various challenges researchers are facing in its reduction. The evolution of photocatalysts used for CO₂ reduction, from heterogeneous catalysis to supramolecule-based molecular catalysis, and subsequent semiconductor-supramolecule hybrid catalysis has been thoroughly discussed. Since CO₂ is thermodynamically a very stable molecule, a huge reduction potential is required to undergo its one- or multielectron reduction. For this reason, various supramolecule photocatalysts were designed involving a photosensitizer unit and a catalyst unit connected by a linker. Later on, solid semiconductor support was also introduced in this supramolecule system to achieve enhanced durability, structural compactness, enhanced charge mobility, and extra overpotential for CO₂ reduction. Reticular chemistry is seen to play a pivotal role as it allows bringing all of the positive features together from various components of this hybrid semiconductor-supramolecule photocatalyst system. Thus, here in this review, we have discussed the selection and role of various components, viz. the photosensitizer component, the catalyst component, the linker, the semiconductor support, the anchoring ligands, and the peripheral ligands for the design of highly performing CO₂ reduction photocatalysts. The selection and role of various sacrificial electron donors have also been highlighted. This review is aimed to help researchers reach an understanding that may translate into the development of excellent CO₂ reduction photocatalysts that are operational under visible light and possess superior activity, efficiency, and selectivity.

Lowering Electrocatalytic CO2 Reduction Overpotential Using N-Annulated Perylene Diimide Rhenium Bipyridine Dyads with Variable Tether Length

We report the design, synthesis, and characterization of four N-annulated perylene diimide (NPDI) functionalized rhenium bipyridine [Re(bpy)] supramolecular dyads. The Re(bpy) scaffold was connected to the NPDI chromophore either directly [Re(py-C0-NPDI)] or via an ethyl [Re(bpy-C2-NPDI)], butyl [Re(bpy-C4-NPDI)], or hexyl [Re(bpy-C6-NPDI)] alkyl-chain spacer. Upon electrochemical reduction in the presence of CO₂ and a proton source, Re(bpy-C2/4/6-NPDI) all exhibited significant current enhancement effects, while Re(py-C0-NPDI) did not. During controlled potential electrolysis (CPE) experiments at E_appl = -1.8 V vs Fc^+/0, Re(bpy-C2/4/6-NPDI) all achieved comparable activity (TON_co ∼ 25) and Faradaic efficiency (FE_co ∼ 94%). Under identical CPE conditions, the standard catalyst Re(dmbpy) was inactive for electrocatalytic CO₂ reduction; only at E_appl = -2.1 V vs Fc^+/0 could Re(dmbpy) achieve the same catalytic performance, representing a 300 mV lowering in overpotential for Re(bpy-C2/4/6-NPDI). At higher overpotentials, Re(bpy-C4/6-NPDI) both outperformed Re(bpy-C2-NPDI), indicating the possibility of coinciding electrocatalytic CO₂ reduction mechanisms that are dictated by tether-length and overpotential. Using UV-vis-nearIR spectroelectrochemistry (SEC), FTIR SEC, and chemical reduction experiments, it was shown that the NPDI-moiety served as an electron-reservoir for Re(bpy), thereby allowing catalytic activity at lower overpotentials. Density functional theory studies probing the optimized geometries and frontier molecular orbitals of various catalytic intermediates revealed that the geometric configuration of NPDI relative to the Re(bpy)-moiety plays a critical role in accessing electrons from the electron-reservoir. The improved performance of Re(bpy-C2/4/6-NPDI)dyads at lower overpotentials, relative to Re(dmbpy), highlights the utility of chromophore electron-reservoirs as a method for lowering the overpotential for CO₂ conversion.

Rapid electron transfer via dynamic coordinative interaction boosts quantum efficiency for photocatalytic CO2 reduction

The fulfillment of a high quantum efficiency for photocatalytic CO₂ reduction presents a key challenge, which can be overcome by developing strategies for dynamic attachment between photosensitizer and catalyst. In this context, we exploit the use of coordinate bond to connect a pyridine-appended iridium photosensitizer and molecular catalysts for CO₂ reduction, which is systematically demonstrated by ¹H nuclear magnetic resonance titration, theoretical calculations, and spectroscopic measurements. The mechanistic investigations reveal that the coordinative interaction between the photosensitizer and an unmodified cobalt phthalocyanine significantly accelerates the electron transfer and thus realizes a remarkable quantum efficiency of 10.2% ± 0.5% at 450 nm for photocatalytic CO₂-to-CO conversion with a turn-over number of 391 ± 7 and nearly complete selectivity, over 4 times higher than a comparative system with no additional interaction (2.4%±0.2%). Moreover, the decoration of electron-donating amino groups on cobalt phthalocyanine can optimize the quantum efficiency up to 27.9% ± 0.8% at 425 nm, which is more attributable to the enhanced coordinative interaction rather than the intrinsic activity. The control experiments demonstrate that the dynamic feature of coordinative interaction is important to prevent the coordination occupancy of labile sites, also enabling the wide applicability on diverse non-noble-metal catalysts.

Positioning photosensitizer and catalyst complexes in photocatalytic systems is a promising method to direct desired electron transfers. Here, authors employ a dynamic coordinative interaction between molecular components to improve CO₂ photoreduction to CO with a high quantum efficiency of 27.9%.

Metal-templated synthesis of rigid and conformationally restricted cyclic bisporphyrins: specific retention times on a cyanopropyl-modified silica gel column

A series of rigid and conformationally restricted cyclic bis(zinc porphyrin)s connected via 2,2'-bipyridine and phthalamide, isophthalamide, or terephthalamide moieties were prepared by metal-templated synthesis. The yields were significantly improved when compared with those obtained under metal-free conditions. In particular, phthalamide and terephthalamide derivatives were obtained only by metal-templated synthesis. Structural analyses and dynamics of the exchange between the conformers in each cyclic porphyrin were examined by NMR spectroscopy. Although the distances between the two zinc porphyrins were extended in the order of phthalamide, isophthalamide, and terephthalamide derivatives, the order of the specific retention of the cyclic porphyrins on cyanopropyl-modified silica gel (CN-MS) chromatography columns varied. Thus, this order was reversed in the isophthalamide and terephthalamide derivatives. Based on the rigid structure of the terephthalamide derivative, the origin of the specific retention on the CN-MS chromatography column was attributed to both the distance and rigidity of the cyclic porphyrins.

Photocatalytic CO2 Reductions Catalyzed by meso-(1,10-Phenanthrolin-2-yl)-Porphyrins Having a Rhenium(I) Tricarbonyl Complex

We have prepared Zn and free-base porphyrins appended with a fac-Re(phen)(CO)3 Br (where phen is 1,10-phenanthroline) at the meso position of the porphyrin, and performed photocatalytic CO2 reduction using porphyrin-Re dyads in the presence of either triethylamine (TEA) or 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as an electron donor. The Zn porphyrin dyad showed a high turnover number for CO production compared with the free-base porphyrin dyad, suggesting that the central Zn ion of porphyrin plays an important role in suppressing electron accumulation on the porphyrin part and achieving high durability of the photocatalytic CO2 reduction using both TEA and BIH. The effect of acids on the CO2 reduction was investigated using the Zn porphyrin-Re dyad and BIH. Acetic acid, a relatively strong Brønsted acid, rapidly causes the porphyrin's color to fade upon irradiation and dramatically decreases CO production, whereas proper weak Brønsted acids such as 2,2,2-trifluoroethanol and phenol enhance the CO2 reduction.

Influence of the Nucleophilic Ligand on the Reactivity of Carbonyl Rhenium(I) Complexes towards Methyl Propiolate: A Computational Chemistry Perspective

A comparative theoretical study on the reactivity of the complexes [ReY(CO)₃(bipy)] (Y = NH₂, NHMe, NHpTol, OH, OMe, OPh, PH₂, PHMe, PMe₂, PHPh, PPh₂, PMePh, SH, SMe, SPh; bipy = 2,2′-bipyridine) towards methyl propiolate was carried out to analyze the influence of both the heteroatom (N, O, P, S) and the alkyl and/or aryl substituents of the Y ligand on the nature of the product obtained. The methyl substituent tends to accelerate the reactions. However, an aromatic ring bonded to N and O makes the reaction more difficult, whereas its linkage to P and S favour it. On the whole, ligands with O and S heteroatoms seem to disfavour these processes more than ligands with N and P heteroatoms, respectively. Phosphido and thiolato ligands tend to yield a coupling product with the bipy ligand, which is not the general case for hydroxo, alcoxo or amido ligands. When the Y ligand has an O/N and an H atom the most likely product is the one containing a coupling with the carbonyl ligand, which is not always obtained when Y contains P/S. Only for OMe and OPh, the product resulting from formal insertion into the Re-Y bond is the preferred.

Rhenium in the core of porphyrin and rhenium bound to the periphery of porphyrin: synthesis and applications

An overview of most of the well known rhenium porphyrins (rhenium in the core of porphyrins) is presented here reviewing their synthesis, coordination chemistry, and applications. The important features of oxorhenium(v) porphyrins are discussed elaborately taking into account their application in epoxidation reaction. Moreover, the chemistry of some recently known porphyrin-Re conjugates (rhenium bound to the periphery of porphyrin) is reported considering their applications in the photochemical carbon dioxide reduction process and photodynamic therapy. The number of well characterized rhenium porphyrinoids are limited but they show interesting diverse properties, some of which are also discussed in this review.

Improving photosensitization for photochemical CO2-to-CO conversion

Inspired by nature, improving photosensitization represents a vital direction for the development of artificial photosynthesis. The sensitization ability of photosensitizers (PSs) reflects in their electron-transfer ability, which highly depends on their excited-state lifetime and redox potential. Herein, for the first time, we put forward a facile strategy to improve sensitizing ability via finely tuning the excited state of Ru(II)-PSs (Ru-1–Ru-4) for efficient CO₂ reduction. Remarkably, [Ru(Phen)₂(3-pyrenylPhen)]²⁺ (Ru-3) exhibits the best sensitizing ability among Ru-1–Ru-4, over 17 times higher than that of typical Ru(Phen)₃²⁺. It can efficiently sensitize a dinuclear cobalt catalyst for CO₂-to-CO conversion with a maximum turnover number of 66 480. Systematic investigations demonstrate that its long-lived excited state and suitable redox driving force greatly contributed to this superior sensitizing ability. This work provides a new insight into dramatically boosting photocatalytic CO₂ reduction via improving photosensitization.

Characterization of charge carrier behavior in photocatalysis using transient absorption spectroscopy

Photocatalysis is a promising sustainable method to generate solar fuels for the future, as well as having other applications such as water/air purification. However, the performance of photocatalysts is often limited by poor charge carrier dynamics. To improve charge carrier dynamics, it is necessary to characterize and understand charge carrier behavior in photocatalytic systems. This critical review will present Transient Absorption Spectroscopy (TAS) as a useful technique for understanding the behavior of photoexcited charges in semiconductor photocatalysts. The role of TAS amongst other techniques for characterizing charge carrier behavior will be outlined. Basic principles behind TAS will be introduced, and interpretation of TAS spectra and kinetics will be discussed in the context of exemplar literature. It will be demonstrated that TAS is a powerful technique to obtain fundamental understanding of the behavior of photoexcited charges.

Dinuclear metal complexes: multifunctional properties and applications

Dinuclear metal complexes have enabled breakthroughs in OLEDs, photocatalytic water splitting and CO₂reduction, DSPEC, chemosensors, biosensors, PDT and smart materials.

Formation of CX Bonds in CO2 Chemical Fixation Catalyzed by Metal-Organic Frameworks

Transformation of CO₂ based on metal-organic framework (MOF) catalysts is becoming a hot research topic, not only because it will help to reduce greenhouse gas emission, but also because it will allow for the production of valuable chemicals. In addition, a large number of impressive products have been synthesized by utilizing CO₂ . In fact, it is the formation of new covalent bonds between CO₂ and substrate molecules that successfully result in CO₂ solidly inserting into the products, and only four types of new CX bonds, including CH, CC, CN, and CO bonds, are observed in this exploration. An overview of recent progress in constructing CX bonds for CO₂ conversion catalyzed by various MOF catalysts is provided. The catalytic mechanism of generating different CX bonds is further discussed according to both structural features of MOFs and the interactions among CO₂ , substrates, as well as MOFs. The future opportunities and challenges in this field are also tentatively covered.

Utility of Squaraine Dyes for Dye-Sensitized Photocatalysis on Water or Carbon Dioxide Reduction

Red light-sensitized squaraine (SQ) dyes were developed and incorporated into dye-sensitized catalysts (DSCs) with the formula of SQ/TiO₂/Cat, and their efficacies were evaluated in terms of performance on either water or carbon dioxide reduction. Pt nanoparticles or fac-[Re(4,4'-bis-(diethoxyphosphorylmethyl)-2,2'-bipyridine)(CO)₃Cl] were used as each catalytic center within the DSC frame of SQ/TiO₂/Pt (Type I) or SQ/TiO₂/Re(I) (Type II). In order to convey the potential utility of SQ in low energy sensitization, the following catalytic reductions were carried out under selective lower energy irradiation (>500 nm). Type I and II showed different catalytic performances, primarily due to the choice of solvent for each catalytic condition: hydrogenation was carried out in H₂O, but CO₂ reduction in dimethylformamide (DMF), and SQ was more stable in aqueous acid conditions for hydrogen generation than CO₂ reduction in DMF. A suspension of Type I in 3 mL water containing 0.1 M ascorbic acid (pH = 2.66) resulted in efficient photocatalytic hydrogen evolution, producing 37 μmol of H₂ for 4 h. However, in photocatalysis of Type II (SQ/TiO₂/Re(I)) in 3 mL DMF containing 0.1 M 1,3-dimethyl-2-phenyl-1,3-dihydrobenzimidazole, the TiO₂-bound SQ dyes were not capable of working as a low energy sensitizer because SQ was susceptible to dye decomposition in nucleophilic DMF conditions, resulting in DSC deactivation for the CO₂ reduction. Even with the limitation of solvent, the DSC conditions for the utility of SQ have been established: the anchoring group effect of SQ with either phosphonic acid or carboxylic acid onto the TiO₂ surface; energy alignment of SQ with the flat band potentials (E _fb) of TiO₂ semiconductors and the reduction power of electron donors; and the wavelength range of the light source used, particularly when >500 nm.

Homogeneous visible light mediated transition metal catalysis other than Ruthenium and Iridium

The field of photoredox chemistry is dominated by ruthenium- or iridium based metal complexes or organic dyes that are employed as catalysts. Other metal based coordination compounds provide a cost efficient alternative, however, the much shorter excited lifetimes generally observed for such complexes make their application more challenging. Nevertheless, a growing number of successful examples with metal complexes based on chromium, iron, nickel, zirconium, cerium, rhenium, platinum, uranium, and especially on copper exist, which is being reviewed in this chapter.

Peripherally Metalated Porphyrins with Applications in Catalysis, Molecular Electronics and Biomedicine

Porphyrins are conjugated, stable chromophores with a central core that binds a variety of metal ions and an easily functionalized peripheral framework. By combining the catalytic, electronic or cytotoxic properties of selected transition metal complexes with the binding and electronic properties of porphyrins, enhanced characteristics of the ensemble are generated. This review article focuses on porphyrins bearing one or more peripheral transition metal complexes and discusses their potential applications in catalysis or biomedicine. Modulation of the electronic properties and intramolecular communication through coordination bond linkages in bis-porphyrin scaffolds is also presented.

Metal-Organic-Framework-Based Catalysts for Photoreduction of CO2

Photoreduction of CO₂ into reusable carbon forms is considered as a promising approach to address the crisis of energy from fossil fuels and reduce excessive CO₂ emission. Recently, metal-organic frameworks (MOFs) have attracted much attention as CO₂ photoreduction-related catalysts, owing to their unique electronic band structures, excellent CO₂ adsorption capacities, and tailorable light-absorption abilities. Recent advances on the design, synthesis, and CO₂ reduction applications of MOF-based photocatalysts are discussed here, beginning with the introduction of the characteristics of high-efficiency photocatalysts and structural advantages of MOFs. The roles of MOFs in CO₂ photoreduction systems as photocatalysts, photocatalytic hosts, and cocatalysts are analyzed. Detailed discussions focus on two constituents of pure MOFs (metal clusters such as Ti-O, Zr-O, and Fe-O clusters and functional organic linkers such as amino-modified, photosensitizer-functionalized, and electron-rich conjugated linkers) and three types of MOF-based composites (metal-MOF, semiconductor-MOF, and photosensitizer-MOF composites). The constituents, CO₂ adsorption capacities, absorption edges, and photocatalytic activities of these photocatalysts are highlighted to provide fundamental guidance to rational design of efficient MOF-based photocatalyst materials for CO₂ reduction. A perspective of future research directions, critical challenges to be met, and potential solutions in this research field concludes the discussion.

Investigation of excited state, reductive quenching, and intramolecular electron transfer of Ru(ii)-Re(i) supramolecular photocatalysts for CO2 reduction using time-resolved IR measurements

Supramolecular photocatalysts in which Ru(ii) photosensitizer and Re(i) catalyst units are connected to each other by an ethylene linker are among the best known, most effective and durable photocatalytic systems for CO2 reduction. In this paper we report, for the first time, time-resolved infrared (TRIR) spectra of three of these binuclear complexes to uncover why the catalysts function so efficiently. Selective excitation of the Ru unit with a 532 nm laser pulse induces slow intramolecular electron transfer from the 3MLCT excited state of the Ru unit to the Re unit, with rate constants of (1.0-1.1) × 104 s-1 as a major component and (3.5-4.3) × 106 s-1 as a minor component, in acetonitrile. The produced charge-separated state has a long lifetime, with charge recombination rate constants of only (6.5-8.4) × 104 s-1. Thus, although it has a large driving force (-ΔG0CR ∼ 2.6 eV), this process is in the Marcus inverted region. On the other hand, in the presence of 1-benzyl-1,4-dihydronicotinamide (BNAH), reductive quenching of the excited Ru unit proceeds much faster (kq[BNAH (0.2 M)] = (3.5-3.8) × 106 s-1) than the abovementioned intramolecular oxidative quenching, producing the one-electron-reduced species (OERS) of the Ru unit. Nanosecond TRIR data clearly show that intramolecular electron transfer from the OERS of the Ru unit to the Re unit (kET > 2 × 107 s-1) is much faster than from the excited state of the Ru unit, and that it is also faster than the reductive quenching process of the excited Ru unit by BNAH. To measure the exact value of kET, picosecond TRIR spectroscopy and a stronger reductant were used. Thus, in the case of the binuclear complex with tri(p-fluorophenyl)phosphine ligands (RuRe(FPh)), for which intramolecular electron transfer is expected to be the fastest among the three binuclear complexes, in the presence of 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH), kET was measured as kET = (1.4 ± 0.1) × 109 s-1. This clearly shows that intramolecular electron transfer in these RuRe binuclear supramolecular photocatalysts is not the rate-determining process in the photocatalytic reduction of CO2, which is one of the main reasons why they work so efficiently.

Photophysics and Photoredox Catalysis of a Homoleptic Rhenium(I) Tris(diisocyanide) Complex

Herein a homoleptic rhenium(I) complex bearing three chelating diisocyanide ligands and its photophysical properties are communicated. The complex emits weakly from a high-energy triplet metal-to-ligand charge-transfer excited state with an 8 ns lifetime in deaerated CH₃CN at 22 °C and is shown to act as an efficient photoredox catalyst comparable to [Ir(ppy)₃] (ppy = 2-phenylpyridine) in representative test reactions.

Covalently linking CuInS2 quantum dots with a Re catalyst by click reaction for photocatalytic CO2 reduction

Covalently linking a Re catalyst to CuInS₂ QDs through a facile click reaction for efficient electron transfer to improve photocatalytic CO₂ reduction is reported.

Synthesis and Photophysical Properties of Porphyrin Macrorings Composed of Free-Base Porphyrins and Slipped-Cofacial Zinc Porphyrin Dimers

The self-assembled macroring N-(Zn-Fb-Zn)₃ has been constructed by intermolecular complementary coordination among three trisporphyrin Zn-Fb-Zn molecules, each of which consists of a central free-base porphyrin and two imidazolyl-zinc-porphyrin ends. Thus, N-(Zn-Fb-Zn)₃ has three slipped-cofacial zinc porphyrin dimers ("special pair model") and three free-base porphyrins, alternately. The zinc porphyrin dimers in N-(Zn-Fb-Zn)₃ are covalently connected by a ring-closing olefin metathesis reaction between the allyl ether groups substituted on the zinc porphyrin dimers, giving a covalently linked macroring C-(Zn-Fb-Zn)₃. The fluorescence spectra of C-(Zn-Fb-Zn)₃ in several solvents show that the photoinduced energy transfer from one of the zinc porphyrin dimers to a free-base porphyrin occurs intramolecularly in toluene, whereas the photoinduced electron transfer predominantly occurs intramolecularly in N,N-dimethylformamide. Treatment of C-(Zn-Fb-Zn)₃ with copper(II) acetate gives a Cu-containing heteromultinuclear porphyrin macroring C-(Zn-Cu-Zn)₃, demonstrating that C-(Zn-Fb-Zn)₃ could be a good precursor to construct various heteromultinuclear porphyrin macrorings.

A Tris(diisocyanide)chromium(0) Complex Is a Luminescent Analog of Fe(2,2'-Bipyridine)32

A meta-terphenyl unit was substituted with an isocyanide group on each of its two terminal aryls to afford a bidentate chelating ligand (CN^tBuAr₃NC) that is able to stabilize chromium in its zerovalent oxidation state. The homoleptic Cr(CN^tBuAr₃NC)₃ complex luminesces in solution at room temperature, and its excited-state lifetime (2.2 ns in deaerated THF at 20 °C) is nearly 2 orders of magnitude longer than the current record lifetime for isoelectronic Fe(II) complexes, which are of significant interest as earth-abundant sensitizers in dye-sensitized solar cells. Due to its chelating ligands, Cr(CN^tBuAr₃NC)₃ is more robust than Cr(0) complexes with carbonyl or monodentate isocyanides, manifesting in comparatively slow photodegradation. In the presence of excess anthracene in solution, efficient energy transfer and subsequent triplet-triplet annihilation upconversion is observed. With an excited-state oxidation potential of -2.43 V vs Fc⁺/Fc, the Cr(0) complex is a very strong photoreductant. The findings presented herein are relevant for replacement of precious metals in dye-sensitized solar cells and in luminescent devices by earth-abundant elements.

Synthesis, spectroscopic, electrochemical and computational studies of rhenium(i) tricarbonyl complexes based on bidentate-coordinated 2,6-di(thiazol-2-yl)pyridine derivatives

The impact of structure modification of the 2,6-di(thiazol-2-yl)pyridine based ligand was investigated.

Rhenium(V)-oxo corrolazines: isolating redox-active ligand reactivity

The synthesis of the first example of a third-row metallocorrolazine characterized by single crystal X-ray diffraction is reported. This Re(V)(O) porphyrinoid complex shows an exclusively ligand-based reactivity with strong acids and oxidizing agents. The one-electron oxidized π-radical-cation complex is capable of H-atom abstraction.