Comparison of methods for the fabrication and the characterization of polymer self-assemblies: what are the important parameters?

ROPISA Strategy for In-Situ Loading in Polypeptide Nanoparticles

We report a ring-opening polymerization induced self-assembly (ROPISA) synthetic strategy for in-situ encapsulation of fluorescent dye molecules in poly(ʟ-serine) based polypeptide nano-assemblies and demonstrate their cellular bioimaging application. A bulky ʟ-serine N-carboxyanhydride monomer is tailor-made and polymerized using PEG-amine as hydrophilic macroinitiator in water at pH 8.5 to obtain polypeptide block copolymer as stable dispersions in the form of opalescent solutions. Both water soluble fluorescent dyes like Rhodamine B, HPTS and water insoluble fluorescent dye like Nile red are readily encapsulated in-situ in the ROPISA process which afforded stable fluorescent polypeptide nanoformulation for direct application in biological system. The polypeptide nanoparticle dispersion is found to be stable, and they are found to have spherical nanoparticle morphology of 25 nm in size. Both the nascent and fluorescent dye encapsulated polypeptide nanoparticles were found to be nontoxic to mammalian cells up to 100 µg/mL and non-hemolytic to Red Blood Cells. These polypeptide nanoparticles were readily endocytosed across the cell membrane and internalized in the cytosol, and the proof-of-concept was established by confocal microscopy. This newly developed in-situ ROPISA process for fluorescent dye loading opens up new platform for polypeptide nano-formulations for application in both material and biomedical fields.

pH-Responsive Micelles Containing Quinine Functionalities Enhance Intracellular Gene Delivery and Expression

Quinine is a promising building block for creating polymer carriers for intracellular nucleic acid delivery. This is due to its ability to bind to genetic material through intercalation and electrostatic interactions and the balance of hydrophobicity and hydrophilicity dependent on the pH/charge state. Yet, studies utilizing cinchona alkaloid natural products in gene delivery are limited. Herein, we present the incorporation of a quinine functionalized monomer (Q) into block polymer architectures to form self-assembled micelles for highly efficient gene delivery. Q was incorporated into the core and/or the shell of the micelles to introduce the unique advantages of quinine to the system. We found that incorporation of Q into the core of the micelle resulted in acid-induced disassembly of the micelle and a boost in transfection efficiency by promoting endosomal escape. This effect was especially evident in the cancerous cell line, A549, which has a more acidic intracellular environment. Incorporation of Q into the shell of the micelles resulted in intercalative binding to the genetic payload as well as larger micelle-DNA complexes (micelleplexes) from the hydrophobicity of Q in the shell. These factors enable the micelleplexes to be more resistant to serum and have more persistent protein expression post-transfection. Overall, this study is the first to demonstrate the benefits of including quinine functionalities into self-assembled micelles for highly efficient gene delivery and presents a platform for inclusion of other natural products with similar properties into micellar systems.

Photodynamic Eradication of Pseudomonas aeruginosa with Ru-Photosensitizers Encapsulated in Enzyme Degradable Nanocarriers

The development of new approaches for the treatment of the increasingly antibiotic-resistant pathogen Pseudomonas aeruginosa was targeted by enhancing the effect of local antimicrobial photodynamic therapy (aPDT) using poly(ethylene glycol)-block-poly(lactic acid) (PEG114-block-PLAx) nanocarriers that were loaded with a ruthenium-based photosensitizer (PS). The action of tris(1,10-phenanthroline) ruthenium (II) bis(hexafluorophosphate) (RuPhen3) encapsulated in PEG114-block-PLAx micelles and vesicles was shown to result in an appreciable aPDT inactivation efficiency against planktonic Pseudomonas aeruginosa. In particular, the encapsulation of the PS, its release, and the efficiency of singlet oxygen (1O2) generation upon irradiation with blue light were studied spectroscopically. The antimicrobial effect was analyzed with two strains of Pseudomonas aeruginosa. Compared with PS-loaded micelles, formulations of the PS-loaded vesicles showed 10 times enhanced activity with a strong photodynamic inactivation effect of at least a 4.7 log reduction against both a Pseudomonas aeruginosa lab strain and a clinical isolate collected from the lung of a cystic fibrosis (CF) patient. This work lays the foundation for the targeted eradication of Pseudomonas aeruginosa using aPDT in various medical application areas.

Iron-based hybrid polyionic complexes as chemical reservoirs for the pH-triggered synthesis of Prussian blue nanoparticles

HYPOTHESIS

Hybrid polyion complexes (HPICs) obtained from the complexation in aqueous solution of a double hydrophilic block copolymer and metal ions can act as efficient precursors for the controlled synthesis of nanoparticles. In particular, the possibility to control the availability of metal ions by playing on the pH conditions is of special interest to obtain nanoparticles with controlled size and composition.

EXPERIMENTS

HPICs based on Fe³⁺ ions were used to initiate the formation of Prussian blue (PB) nanoparticles in presence of potassium ferrocyanide in reaction media with varying pH values.

FINDINGS

Complexed Fe³⁺ ions within HPICs can be easily released by adjusting the pH value either through the addition of a base/acid or by using a merocyanine photoacid. This allows to modulate the reactivity of Fe³⁺ ions with potassium ferrocyanide present in solution. As a result, PB nanoparticles with different structures (core, core-shell), composition and controlled size are obtained.

Diblock versus block-random copolymer architecture effect on physical properties of Gd3+-based hybrid polyionic complexes

HYPOTHESIS

Random insertion of vinylphosphonic acid (VPA) units into a of PEG-PAA block copolymer improves the chemical stability and properties of hybrid nanoobjects obtained from the complexation of the copolymer with metal ions.

EXPERIMENTS

Block polymers based on poly(acrylic acid) (PAA) and poly(ethylene glycol) (PEG) are modified by random insertion of 0 to 100 % of phosphonic acid functions in PAA block by a RAFT polymerization process. These polymers are then used to form hybrid polyionic complexes (HPICs) by complexation with gadolinium or europium ions. The properties of the obtained assemblies are evaluated by magnetic relaxivity, fluorescence and light scattering measurements.

FINDINGS

The insertion of VPA units within the PAA block increases the chemical stability of the hybrid micelles by maintaining their integrity even at low pH. This insertion also minimizes the exchange of ions between HPICs and the surrounding medium thanks to a strengthening of interactions toward lanthanide ions. When such systems are used as MRI contrast agents or luminescent probe, 50/50 AA/VPA composition appears to be a good compromise to achieve optimal relaxivity or luminescent properties while ensuring a good chemical stability.

Assemblies of poly(N-vinyl-2-pyrrolidone)-based double hydrophilic block copolymers triggered by lanthanide ions: characterization and evaluation of their properties as MRI contrast agents

Because of the formation of specific antibodies to poly(ethylene glycol) (PEG) leading to life-threatening side effects, there is an increasing need to develop alternatives to treatments and diagnostic methods based on PEGylated copolymers. Block copolymers comprising a poly(N-vinyl-2-pyrrolidone) (PVP) segment can be used for the design of such vectors without any PEG block. As an example, a poly(acrylic acid)-block-poly(N-vinyl-2-pyrrolidone) (PAA-b-PVP) copolymer with controlled composition and molar mass is synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Mixing this copolymer with lanthanide cations (Gd³⁺, Eu³⁺, Y³⁺) leads to the formation of hybrid polyion complexes with increased stability, preventing the lanthanide cytotoxicity and in vitro cell penetration. These new nanocarriers exhibit enhanced T₁ MRI contrast, when intravenously administered into mice. No leaching of gadolinium ions is detected from such hybrid complexes.

Synthesis and Self-Assembly of UV-Cross-Linkable Amphiphilic Polyoxazoline Block Copolymers: Importance of Multitechnique Characterization

In the nanomedicine field, there is a need to widen the availability of nanovectors to compensate for the increasingly reported side effects of poly(ethene glycol). Nanovectors enabling cross-linking can further optimize drug delivery. Cross-linkable polyoxazolines are therefore relevant candidates to address these two points. Here we present the synthesis of coumarin-functionalized poly(2-alkyl-2-oxazoline) block copolymers, namely, poly(2-methyl-2-oxazoline)-block-poly(2-phenyl-2-oxazoline) and poly(2-methyl-2-oxazoline)-block-poly(2-butyl-2-oxazoline). The hydrophilic ratio and molecular weights were varied in order to obtain a range of possible behaviors. Their self-assembly after nanoprecipitation or film rehydration was examined. The resulting nano-objects were fully characterized by transmission electron microscopy (TEM), cryo-TEM, multiple-angle dynamic and static light scattering. In most cases, the formation of polymer micelles was observed, as well as, in some cases, aggregates, which made characterization more difficult. Cross-linking was performed under UV illumination in the presence of a coumarin-bearing cross-linker based on polymethacrylate derivatives. Addition of the photo-cross-linker and cross-linking resulted in better-defined objects with improved stability in most cases.

Tailoring a Solvent-Assisted Method for Solid-Supported Hybrid Lipid-Polymer Membranes

Combining amphiphilic block copolymers and phospholipids opens new opportunities for the preparation of artificial membranes. The chemical versatility and mechanical robustness of polymers together with the fluidity and biocompatibility of lipids afford hybrid membranes with unique properties that are of great interest in the field of bioengineering. Owing to its straightforwardness, the solvent-assisted method (SA) is particularly attractive for obtaining solid-supported membranes. While the SA method was first developed for lipids and very recently extended to amphiphilic block copolymers, its potential to develop hybrid membranes has not yet been explored. Here, we tailor the SA method to prepare solid-supported polymer-lipid hybrid membranes by combining a small library of amphiphilic diblock copolymers poly(dimethyl siloxane)-poly(2-methyl-2-oxazoline) and poly(butylene oxide)-block-poly(glycidol) with phospholipids commonly found in cell membranes including 1,2-dihexadecanoyl-sn-glycero-3-phosphocholine, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine, sphingomyelin, and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-(glutaryl). The optimization of the conditions under which the SA method was applied allowed for the formation of hybrid polymer-lipid solid-supported membranes. The real-time formation and morphology of these hybrid membranes were evaluated using a combination of quartz crystal microbalance and atomic force microscopy. Depending on the type of polymer-lipid combination, significant differences in membrane coverage, formation of domains, and quality of membranes were obtained. The use of the SA method for a rapid and controlled formation of solid-supported hybrid membranes provides the basis for developing customized artificial hybrid membranes.

Biocatalytic self-assembled synthetic vesicles and coacervates: From single compartment to artificial cells

Compartmentalization is an intrinsic feature of living cells that allows spatiotemporal control over the biochemical pathways expressed in them. Over the years, a library of compartmentalized systems has been generated, which includes nano to micrometer sized biomimetic vesicles derived from lipids, amphiphilic block copolymers, peptides, and nanoparticles. Biocatalytic vesicles have been developed using a simple bag containing enzyme design of liposomes to multienzymes immobilized multi-vesicular compartments for artificial cell generation. Additionally, enzymes were also entrapped in membrane-less coacervate droplets to mimic the cytoplasmic macromolecular crowding mechanisms. Here, we have discussed different types of single and multicompartment systems, emphasizing their recent developments as biocatalytic self-assembled structures using recent examples. Importantly, we have summarized the strategies in the development of the self-assembled structure to improvise their adaptivity and flexibility for enzyme immobilization. Finally, we have presented the use of biocatalytic assemblies in mimicking different aspects of living cells, which further carves the path for the engineering of a minimal cell.

Dendron-functionalised hyperbranched bis-MPA polyesters as efficient non-viral vectors for gene therapy in different cell lines

Gene therapy has become a relevant tool in the biomedical field to treat or even prevent some diseases. The effective delivery of genetic material into the cell remains a crucial...

Hybrid polymeric micelles stabilized by gallium ions: Structural investigation

The addition of gallium ions to a solution of a double-hydrophilic block copolymer, i.e. poly(ethylene oxide)-block-poly(acrylic acid), leads to the spontaneous formation of highly monodisperse micelles with a Hybrid PolyIon Complexes (HPICs) core. By combining several techniques, a precise description of the HPIC architecture was achieved. In particular and for the first time, NMR and anomalous small angle X-ray scattering (ASAXS) enable tracking of the inorganic ions in solution and highlighting the co-localization of the gallium and the poly(acrylic acid) blocks in a rigid structure at the core of the micelle. Such a core has a radius of ca 4.3 nm while the complete nano-object with its poly(ethylene oxide) shell has a total radius of ca 11 nm. The aggregation number was also estimated using the ASAXS results. This comprehensive structural characterization of the Ga HPICs corroborates the assumptions made for HPICs based on other inorganic ions and demonstrates the universality of the HPIC structure leading, for example, to new families of contrast agents in medical imaging.

Hydrogen Sulfide-Responsive Bicontinuous Nanospheres

Block copolymers (BCPs) that can self-assemble into particles and be triggered by disease-specific molecules such as hydrogen sulfide (H₂S) have the potential to impact on drug delivery, decreasing off-target toxicities while increasing drug efficacy. However, the incorporation of H₂S-responsive aryl azides into BCPs for self-assembly has been limited by heat, light, and radical sensitivities. In this study, a robust activator regenerated by the electron-transfer atom-transfer radical polymerization reaction was used to synthesize aryl-azide-containing BCPs under ambient conditions. Conditions controlling self-assembly of the BCPs into 150-200 nm particles and the physicochemical properties of the particles were investigated. The use of nanoprecipitation with tetrahydrofuran to promote self-assembly of the BCPs resulted in vesicle structures, while dimethylformamide or dimethylsulfoxide resulted in polymeric bicontinuous nanospheres (BCNs). Triggering of the BCPs and particles (vesicles or BCNs) via exposure to H₂S revealed that unsubstituted aryl azides were readily reduced (by HS^-), resulting in particle disruption or cross-linking. The relative polar nature of the particle bilayers containing unsubstituted aryl azides and the open structure of the BCNs did however limit encapsulation of small hydrophilic and hydrophobic payloads. Incorporation of a benzylamide substituent onto the aryl azide group increased the hydrophobicity of the particles and encapsulation of hydrophilic cargo but reduced sensitivity to H₂S, likely due to the reduced penetration of HS^- into the bilayer.

Kinetic stability modulation of polymeric nanoparticles for enhanced detection of influenza virus via penetration of viral fusion peptides

Specific interactions between viruses and host cells provide essential insights into material science-based strategies to combat emerging viral diseases. pH-triggered viral fusion is ubiquitous to multiple viral families and is important for understanding the viral infection cycle. Inspired by this process, virus detection has been achieved using nanomaterials with host-mimetic membranes, enabling interactions with amphiphilic hemagglutinin fusion peptides of viruses. Most research has been on designing functional nanoparticles with fusogenic capability for virus detection, and there has been little exploitation of the kinetic stability to alter the ability of nanoparticles to interact with viral membranes and improve their sensing performance. In this study, a homogeneous fluorescent assay using self-assembled polymeric nanoparticles (PNPs) with tunable responsiveness to external stimuli is developed for rapid and straightforward detection of an activated influenza A virus. Dissociation of PNPs induced by virus insertion can be readily controlled by varying the fraction of hydrophilic segments in copolymers constituting PNPs, giving rise to fluorescence signals within 30 min and detection of various influenza viruses, including H9N2, CA04(H1N1), H4N6, and H6N8. Therefore, the designs demonstrated in this study propose underlying approaches for utilizing engineered PNPs through modulation of their kinetic stability for direct and sensitive identification of infectious viruses.

Fully amorphous atactic and isotactic block copolymers and their self-assembly into nano- and microscopic vesicles

The introduction of chirality into aqueous self-assemblies by employing isotactic block copolymers (BCPs) is an emerging field of interest as it promises special membrane properties of polymersomes not accessible by atactic BCPs. However, isotactic BCPs typically exhibit crystalline behaviour, inducing high membrane stiffness and limiting their applicability in systems involving membrane proteins or sensitive cargo. In this study, an isotactic yet fully amorphous BCP is introduced which overcomes these limitations. Three BCPs composed of poly(butylene oxide)-block-poly(glycidol) (PBO-b-PG), differing solely in their tacticities (R/S, R and S), were synthesised and characterised regarding their structural, optical and thermal properties. Their self-assembly into homogenous phases of nanoscopic polymersomes (referred to as small unilamellar vesicles, SUVs) was analysed, revealing stability differences between SUVs composed of the different BCPs. Additionally, microscopic giant unilamellar vesicles (GUVs) were prepared by double emulsion microfluidics. Only the atactic BCP formed GUVs which were stable over several hours, whereas GUVs composed of isotactic BCPs ruptured within several minutes after formation. The ability of atactic PBO-b-PG to form microreactors was elucidated by reconstituting the membrane protein OmpF in the GUV membrane by microfluidics and performing an enzyme reaction inside its lumen. The system presented here serves as platform to design versatile vesicles with flexible membranes composed of atactic or isotactic BCPs. Hence, they allow for the introduction of chirality into nano- or microreactors which is a yet unstudied field and could enable special biotechonological applications.

Methods of Encapsulation of Biomacromolecules and Living Cells. Prospects of Using Metal–Organic Frameworks

The review discusses different methods of encapsulation and biomineralization of macromolecules and living cells. Main advantages and disadvantages of most commonly used carriers, matrices, and materials for immobilization of proteins, enzymes, nucleic acids, and living cells are briefly surveyed. Examples of delivery vehicles for multifunctional encapsulation of protein-like substances are presented. Particular attention is paid to prospects of using metal–organic frameworks in medicine and biotechnology.

Repurposing of Guanabenz acetate by encapsulation into long-circulating nanopolymersomes for treatment of triple-negative breast cancer

Poor patient response and limited treatment modalities are the major challenges against combating triple-negative breast cancer (TNBC). The high related mortality urges for novel cancer therapeutics. Guanabenz acetate (GA) is an orphan antihypertensive drug with a short half-life. Re-purposing (GA) by developing a polymersome (PS)-based cancer nanomedicine is an innovative approach in treating TNBC. Formulation and optimization of GA-loaded PEGylated Polycaprolactone PS through different process variables (solvent selection, the order of addition, pH of the aqueous phase, and drug to polymer ratio) were achieved by the nanoprecipitation method. The in vitro cellular uptake, anti-cancer, and anti-metastatic activity of GA and GA-loaded PS were tested in MDA-MB 231(TNBC cell line) and MCF-7 cell line. Western blot analysis was performed to elucidate the molecular anti-cancer mechanism. The in vivo biodistribution study and antitumor activity were investigated in the TNBC-xenograft model implanted in mice. Under optimized formulation conditions, GA-loaded PS had a nanosize of 90.5 nm with PDI < 0.2, a zeta potential -9.11 mV, drug encapsulation efficiency of 92.11% and sustained drug release for 6-days. GA-loaded PS exhibited enhanced cellular uptake and achieved a significantly lower IC₅₀ in both breast cancer cell lines compared to free GA. Treatment with GA-loaded PS (60 µM) showed a significant reduction of 60.5 and 78.1% in cancer migration and metastasis in the case of MDA-MB 231 and MCF-7, respectively. Besides, drug-loaded PS increased phosphorylation of translational regulator eIF2α and decreased expression of Rac1 which were essential for decreasing cancer cell survival and metastasis. In vivo biodistribution study of GA-loaded PS showed long-circulating PS with high passively targeted tumor accumulation. Treatment with GA-loaded PS resulted in a significant decrease in tumor size and weight compared to free GA. In conclusion, GA-loaded PS is a new promising cancer therapeutics for the treatment of TNBC.

Weakly Ionically Bound Thermosensitive Hyperbranched Polymers

We synthesized novel amphiphilic hyperbranched polymers (HBPs) with variable contents of weakly ionically tethered thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) macrocations in contrast to traditional covalent linking. Their assembling behavior was studied below and above the lower critical solution temperature (LCST). The HBPs underwent a morphological transition under changing temperature and ionic strength due to the LCST transition of PNIPAM and the reduction in the ionization degree of terminal ionic groups, respectively. We suggest that, in contrast to traditional branched polymers, ionically linked PNIPAM macrocations can reversibly disassociate from the sulfonate groups and form mobile coronas, endowing the dynamic micellar morphologies. In addition, assembly at the air-water interface confined PNIPAM macrocations and resulted in the formation of heterogeneous Langmuir-Blodgett (LB) monolayers with diverse surface morphologies for different peripheral compositions with circular domains formed in the condensed state. The HBPs with 25% PNIPAM showed larger and more stable circular domains that were partially preserved at high compression than those of HBPs with 50% PNIPAM. Moreover, the LB monolayers showed variable surface mechanical and surface charge distribution, which can be attributed to net dipole redistribution caused by the behavior of mobile PNIPAM macrocations and core sulfonate groups.

Poly(Ethylene Glycol)-b-Poly(D,L-Lactide) Nanoparticles as Potential Carriers for Anticancer Drug Oxaliplatin

Nanoparticles based on biocompatible methoxy poly(ethylene glycol)-b-poly(D,L-lactide) (mPEG₁₁₃-b-P(D,L)LA_n) copolymers as potential vehicles for the anticancer agent oxaliplatin were prepared by a nanoprecipitation technique. It was demonstrated that an increase in the hydrophobic PLA block length from 62 to 173 monomer units leads to an increase of the size of nanoparticles from 32 to 56 nm. Small-angle X-ray scattering studies confirmed the “core-corona” structure of mPEG₁₁₃-b-P(D,L)LA_n nanoparticles and oxaliplatin loading. It was suggested that hydrophilic oxaliplatin is adsorbed on the core-corona interface of the nanoparticles during the nanoprecipitation process. The oxaliplatin loading content decreased from 3.8 to 1.5% wt./wt. (with initial loading of 5% wt./wt.) with increasing PLA block length. Thus, the highest loading content of the anticancer drug oxaliplatin with its encapsulation efficiency of 76% in mPEG₁₁₃-b-P(D,L)LA_n nanoparticles can be achieved for block copolymer with short hydrophobic block.

Effect of the microstructure of n-butyl acrylate/N-isopropylacrylamide copolymers on their thermo-responsiveness, self-organization and gel properties in water

HYPOTHESIS

Polymer composition, microstructure, molar mass, architecture… critically affect the properties of thermoresponsive polymers in aqueous media.

EXPERIMENTS

The behaviour of n-isopropylacrylamide and n-butyl acrylate-based copolymers of variable composition and structure (statistical, diblock or triblock) was studied in solution at different temperatures and concentrations with turbidimetry measurements, differential scanning calorimetry, electronic microscopy, rheology and scattering experiments.

FINDINGS

This study illustrates how it is possible through chemical engineering of the microstructure of amphiphilic thermoresponsive polymers to modulate significantly the self-assembly, morphological and mechanical properties of these materials in aqueous media. Statistical structures induced a strong decrease of cloud point temperature compared to block structures with similar composition. Moreover, block structures lead below the transition temperature to the formation of colloidal structures. Above the transition temperature, the formation of colloidal aggregates is observed at low concentrations, and at higher concentrations the formation of gels. Neutron scattering and light scattering measurements show that for a given composition diblock structures lead to smaller colloids and mesoglobules than their triblock counterparts. Moreover, diblock structures, compared to triblock analogs, allow the formation of gels that do not demix with time (no synaeresis) but that are softer than triblock gels.

Designing peptide nanoparticles for efficient brain delivery

The targeted delivery of therapeutic compounds to the brain is arguably the most significant open problem in drug delivery today. Nanoparticles (NPs) based on peptides and designed using the emerging principles of molecular engineering show enormous promise in overcoming many of the barriers to brain delivery faced by NPs made of more traditional materials. However, shortcomings in our understanding of peptide self-assembly and blood-brain barrier (BBB) transport mechanisms pose significant obstacles to progress in this area. In this review, we discuss recent work in engineering peptide nanocarriers for the delivery of therapeutic compounds to the brain: from synthesis, to self-assembly, to in vivo studies, as well as discussing in detail the biological hurdles that a nanoparticle must overcome to reach the brain.

Self-assembly of dextran - b - deoxycholic acid polyester copolymers: Copolymer composition and self-assembly procedure tune the aggregate size and morphology

Self-assembly potential of new amphiphilic block copolymers containing dextran (M_n 4500, 8000, 15,000) and a semi-rigid deoxycholic acid-oligoethyleneglycol polyester (M_n 2500-8800, 2 or 4 ethyleneglycol units), was evaluated as a function of copolymer composition and self-assembly procedure, using dynamic light scattering and transmission electron microscopy. Addition of copolymer solution to water provided small star-like micelles (∼ 100 nm), while addition of water to copolymer solution led to various morphologies and sizes (60-600 nm), depending on polymer composition. Worm-like micelles were obtained from a copolymer containing dextran with M_n 4500 and 66 wt% polyester, and vesicles were formed by copolymers prepared from dextran with M_n 8000 and containing 46 wt% polyester. Presence of a longer oligoethyleneglycol decreased the size of micelles and vesicles due to an enhanced flexibility of the polyester hydrophobic block. The results allow the selection of the most appropriate parameters to obtain the desired aggregate characteristics.

Deepening the insight into poly(butylene oxide)-block-poly(glycidol) synthesis and self-assemblies: micelles, worms and vesicles

Aqueous self-assembly of amphiphilic block copolymers is studied extensively for biomedical applications like drug delivery and nanoreactors. The commonly used hydrophilic block poly(ethylene oxide) (PEO), however, suffers from several drawbacks. As a potent alternative, poly(glycidol) (PG) has gained increasing interest, benefiting from its easy synthesis, high biocompatibility and flexibility as well as enhanced functionality compared to PEO. In this study, we present a quick and well-controlled synthesis of poly(butylene oxide)-block-poly(glycidol) (PBO-b-PG) amphiphilic diblock copolymers together with a straight-forward self-assembly protocol. Depending on the hydrophilic mass fraction of the copolymer, nanoscopic micelles, worms and polymersomes were formed as well as microscopic giant unilamellar vesicles. The particles were analysed regarding their size and shape, using dynamic and static light scattering, TEM and Cryo-TEM imaging as well as confocal laser scanning microscopy. We have discovered a strong dependence of the formed morphology on the self-assembly method and show that only solvent exchange leads to the formation of homogenous phases. Thus, a variety of different structures can be obtained from a highly flexible copolymer, justifying a potential use in biomedical applications.

Giant Polymer Compartments for Confined Reactions

In nature, various specific reactions only occur in spatially controlled environments. Cell compartment and subcompartments act as the support required to preserve the bio-specificity and functionality of the biological content, by affording absolute segregation. Inspired by this natural perfect behavior, bottom-up approaches are on focus to develop artificial cell-like structures, crucial for understanding relevant bioprocesses and interactions or to produce tailored solutions in the field of therapeutics and diagnostics. In this review, we discuss the benefits of constructing polymer-based single and multicompartments (capsules and giant unilamellar vesicles (GUVs)), equipped with biomolecules as to mimic cells. In this respect, we outline key examples of how such structures have been designed from scratch, namely, starting from the application-oriented selection and synthesis of the amphiphilic block copolymer. We then present the state-of-the-art techniques for assembling the supramolecular structure while permitting the encapsulation of active compounds and the incorporation of peptides/membrane proteins, essential to support in situ reactions, e.g., to replicate intracellular signaling cascades. Finally, we briefly discuss important features that these compartments offer and how they could be applied to engineer the next generation of microreactors, therapeutic solutions, and cell models.

Hybrid giant lipid vesicles incorporating a PMMA-based copolymer

BACKGROUND

In recent years, there has been a growing interest in the formation of copolymer-lipid hybrid self-assemblies, which allow combining and improving the main features of pure lipid-based and copolymer-based systems known for their potential applications in the biomedical field. As the most common method used to obtain giant vesicles is electroformation, most systems so far used low T_g polymers for their flexibility at room temperature.

METHODS

Copolymers used in the hybrid vesicles have been synthesized by a modified version of the ATRP, namely the Activators ReGenerated by Electron Transfer ATRP and characterized by NMR and DSC. Giant hybrid vesicles have been obtained using electroformation and droplet transfer method. Confocal fluorescence microscopy was used to image the vesicles.

RESULTS

Electroformation enabled to obtain hybrid vesicles in a narrow range of compositions (15 mol% was the maximum copolymer content). This range could be extended by the use of a droplet transfer method, which enabled obtaining hybrid vesicles incorporating a methacrylate-based polymer in a wide range of compositions. Proof of the hybrid composition was obtained by fluorescence microscopy using labeled lipids and copolymers.

CONCLUSIONS

This work describes for the first time, to the best of our knowledge, the formation of giant hybrid polymer/lipid vesicles formed with such a content of a polymethylmethacrylate copolymer, the glass temperature of which is above room temperature.

GENERAL SIGNIFICANCE

This work shows that polymer structures, more complex than the ones mostly employed, can be possibly included in giant hybrid vesicles by using the droplet transfer method. This will give easier access to functionalized and stimuli-responsive giant vesicles and to systems exhibiting a tunable permeability, these systems being relevant for biological and technological applications.

γ-Butyrolactone Copolymerization with the Well-Documented Polymer Drug Carrier Poly(ethylene oxide)-block-poly(ε-caprolactone) to Fine-Tune Its Biorelevant Properties

Polymeric drug carriers exhibit excellent properties that advance drug delivery systems. In particular, carriers based on poly(ethylene oxide)-block-poly(ε-caprolactone) are very useful in pharmacokinetics. In addition to their proven biocompatibility, there are several requirements for the efficacy of the polymeric drug carriers after internalization, e.g., nanoparticle behavior, cellular uptake, the rate of degradation, and cellular localization. The introduction of γ-butyrolactone units into the hydrophobic block enables the tuning of the abovementioned properties over a wide range. In this study, a relatively high content of γ-butyrolactone units with a reasonable yield of ≈60% is achieved by anionic ring-opening copolymerization using 1,5,7-triazabicyclo[4.4.0]dec-5-ene as a very efficient catalyst in the nonpolar environment of toluene with an incorporated γ-butyrolactone content of ≈30%. The content of γ-butyrolactone units can be easily modulated according to the feed ratio of the monomers. This method enables control over the rate of degradation so that when the content of γ-butyrolactone increases, the rate of degradation increases. These findings broaden the application possibilities of polyester-polyether-based nanoparticles for biomedical applications, such as drug delivery systems.

Rational design of block copolymer self-assemblies in photodynamic therapy

Photodynamic therapy is a technique already used in ophthalmology or oncology. It is based on the local production of reactive oxygen species through an energy transfer from an excited photosensitizer to oxygen present in the biological tissue. This review first presents an update, mainly covering the last five years, regarding the block copolymers used as nanovectors for the delivery of the photosensitizer. In particular, we describe the chemical nature and structure of the block copolymers showing a very large range of existing systems, spanning from natural polymers such as proteins or polysaccharides to synthetic ones such as polyesters or polyacrylates. A second part focuses on important parameters for their design and the improvement of their efficiency. Finally, particular attention has been paid to the question of nanocarrier internalization and interaction with membranes (both biomimetic and cellular), and the importance of intracellular targeting has been addressed.

Biomolecule–polymer hybrid compartments: combining the best of both worlds

Recent advances in bio/polymer hybrid compartments in the quest to obtain artificial cells, biosensors and catalytic compartments.

Self-Assembly of PEG-b-PTMC Copolymers: Micelles and Polymersomes Size Control

Poly(ethylene glycol)₄₅-b-poly(trimethylene carbonate)_n PEG₄₅-b-PTMC_n diblock copolymers were synthesized with five different PTMC degrees of polymerization (n = 38, 96, 144, 170, 332) and their self-assembly properties in water were studied using a manual nanoprecipitation procedure. We confirmed that the copolymer's hydrophilic weight fraction (f_PEG) is controlling nanoparticles morphology. We determined that the PEG₄₅-b-PTMC₉₆ with f_PEG ≈ 17% is the optimal hydrophilic fraction for the stabilization of well-defined unilamellar vesicles with a membrane thickness of δ ≈ 14.6 nm. Maintaining this fraction constant and modulating the overall molar mass of the block copolymers allowed the establishment of a power law of [Formula: see text] which provides a robust correlation between the molar mass of PTMC and vesicles' membrane thickness. Finally, we proved that controlling nanoprecipitation's conditions by microfluidics allowed fine-tuning and control of the nanoparticles size and polydispersity index while maintaining their shape with a perfect batch-to-batch reproducibility.

Quality-by-Design Approach for Biological API Encapsulation into Polymersomes Using "Off-the-Shelf" Materials: a Study on L-Asparaginase

Polymersomes are versatile nanostructures for protein delivery with hydrophilic core suitable for large biomolecule encapsulation and protective stable corona. Nonetheless, pharmaceutical products based on polymersomes are not available in the market, yet. Here, using commercially available copolymers, we investigated the encapsulation of the active pharmaceutical ingredient (API) L-asparaginase, an enzyme used to treat acute lymphoblastic leukemia, in polymersomes through a quality-by-design (QbD) approach. This allows for streamlining of processes required for improved bioavailability and pharmaceutical activity. Polymersomes were prepared by bottom-up (temperature switch) and top-down (film hydration) methods employing the diblock copolymers poly(ethylene oxide)-poly(lactic acid) (PEG₄₅-PLA₆₉, PEG₁₁₄-PLA₁₅₃, and PEG₁₁₄-PLA₁₈₀) and the triblock Pluronic^® L-121 (poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), PEG₅-PPO₆₈-PEG₅). Quality Target Product Profile (QTPP), Critical Quality Attributes (CQAs), Critical Process Parameters (CPPs), and the risk assessment were discussed for the early phase of polymersome development. An Ishikawa diagram was elaborated focusing on analytical methods, raw materials, and processes for polymersome preparation and L-asparaginase encapsulation. PEG-PLA resulted in diluted polymersomes systems. Nonetheless, a much higher yield of Pluronic^® L-121 polymersomes of 200 nm were produced by temperature switch, reaching 5% encapsulation efficiency. Based on these results, a risk estimation matrix was created for an initial risk assessment, which can help in the future development of other polymersome systems with biological APIs nanoencapsulated.

Rifampicin Nanoformulation Enhances Treatment of Tuberculosis in Zebrafish

Mycobacterium tuberculosis, the etiologic agent of tuberculosis, is an intracellular pathogen of alveolar macrophages. These cells avidly take up nanoparticles, even without the use of specific targeting ligands, making the use of nanotherapeutics ideal for the treatment of such infections. Methoxy poly(ethylene oxide)- block-poly(ε-caprolactone) nanoparticles of several different polymer blocks' molecular weights and sizes (20-110 nm) were developed and critically compared as carriers for rifampicin, a cornerstone in tuberculosis therapy. The polymeric nanoparticles' uptake, consequent organelle targeting and intracellular degradation were shown to be highly dependent on the nanoparticles' physicochemical properties (the cell uptake half-lives 2.4-21 min, the degradation half-lives 51.6 min-ca. 20 h after the internalization). We show that the nanoparticles are efficiently taken up by macrophages and are able to effectively neutralize the persisting bacilli. Finally, we demonstrate, using a zebrafish model of tuberculosis, that the nanoparticles are well tolerated, have a curative effect, and are significantly more efficient compared to a free form of rifampicin. Hence, these findings demonstrate that this system shows great promise, both in vitro and in vivo, for the treatment of tuberculosis.

Electrochemical impacts complement light scattering techniques for in situ nanoparticle sizing

We show that the electrochemical particle-impact technique (or 'nano-impacts') complements light scattering techniques for sizing both mono- and poly-disperse nanoparticles. It is found that established techniques - Dynamic Light Scattering (DLS) and Nanoparticle Tracking Analysis (NTA) - can accurately measure the diameters of '30 nm' silver particles assuming spherical shapes, but are unable to accurately size a smaller '20 nm' sample. In contrast, nano-impacts have a high accuracy (<5% error in effective diameters) and are able to size both individual '20 nm' and '30 nm' silver NPs in terms of the number of constituent atoms. Further study of a '20 nm and 30 nm' bimodal sample shows that the electrochemical technique resolves the two very similar sizes well, demonstrating accurate sizing regardless of particle size polydispersity, whereas due to inherent limitations of light scattering measurements this is not possible for DLS and NTA. Electrochemical sizing is concluded to offer significant attractions over light scattering methods.

Polymersomes: Preparation and Characterization

Polymersomes, also called polymeric vesicles, are self-assembled by amphiphilic copolymers. Due to their unique characters, polymersomes are attracting more and more interest as an important class of vehicles for nanopharmaceuticals. In this chapter, various methods to prepare and characterize polymersomes are introduced systematically with several applicable examples. In addition, the advantages and disadvantages of each method were compared and analyzed with the aim to help readers choose the appropriate method in the process of experiments. Although some methods we introduced here are effective in preparing and characterizing polymersomes, the remaining challenge in this filed is to develop new tools. The reason is that polymersome is a kind of complex nanostructure, and some minor factors can affect the formation of polymersome. Meanwhile, more advanced technology should be developed to precisely determine the structure of some complex polymersomes such as multilayer polymersomes.

Polymersomes: Breaking the Glass Ceiling?

Polymer vesicles, also known as polymersomes, have garnered a lot of interest even before the first report of their fabrication in the mid-1990s. These capsules have found applications in areas such as drug delivery, diagnostics and cellular models, and are made via the self-assembly of amphiphilic block copolymers, predominantly with soft, rubbery hydrophobic segments. Comparatively, and despite their remarkable impermeability, glassy polymersomes (GPs) have been less pervasive due to their rigidity, lack of biodegradability and more restricted fabrication strategies. GPs are now becoming more prominent, thanks to their ability to undergo stable shape-change (e.g., into non-spherical morphologies) as a response to a predetermined trigger (e.g., light, solvent). The basics of block copolymer self-assembly with an emphasis on polymersomes and GPs in particular are reviewed here. The principles and advantages of shape transformation of GPs as well as their general usefulness are also discussed, together with some of the challenges and opportunities currently facing this area.

Molecular bionics - engineering biomaterials at the molecular level using biological principles

Life and biological units are the result of the supramolecular arrangement of many different types of molecules, all of them combined with exquisite precision to achieve specific functions. Taking inspiration from the design principles of nature allows engineering more efficient and compatible biomaterials. Indeed, bionic (from bion-, unit of life and -ic, like) materials have gained increasing attention in the last decades due to their ability to mimic some of the characteristics of nature systems, such as dynamism, selectivity, or signalling. However, there are still many challenges when it comes to their interaction with the human body, which hinder their further clinical development. Here we review some of the recent progress in the field of molecular bionics with the final aim of providing with design rules to ensure their stability in biological media as well as to engineer novel functionalities which enable navigating the human body.

Extended photo-induced endosome-like structures in giant vesicles promoted by block-copolymer nanocarriers

Upon irradiation, the photosensitizer pheophorbide-a causes dramatic morphological transitions in giant unilamellar lipid vesicles. This endocytosis-like process occurs only when the photoactive species are encapsulated in a copolymer nanocarrier and strictly depends on the chemical nature of the copolymer. Altogether, these results open up new perspectives in the field of photo-chemical internalization mediated by nanoassemblies.

Transport of nano-objects in narrow channels: influence of Brownian diffusion, confinement and particle nature

This paper presents experimental results about transport of dilute suspensions of nano-objects in silicon-glass micrometric and sub-micrometric channels. Two kinds of objects are used: solid, rigid latex beads and spherical capsule-shaped, soft polymersomes. They are tracked using fluorescence microscopy. Three aspects are studied: confinement (ratio between particle diameter and channel depth), Brownian diffusion and particle nature. The aim of this work is to understand how these different aspects affect the transport of suspensions in narrow channels and to understand the different mechanisms at play. Concerning the solid beads we observe the appearance of two regimes, one where the experimental mean velocity is close to the expected one and another where this velocity is lower. This is directly related to a competition between confinement, Brownian diffusion and advection. These two regimes are shown to be linked to the inhomogeneity of particles distribution in the channel depth, which we experimentally deduce from velocity distributions. This inhomogeneity appears during the entrance process into the sub-micrometric channels, as for hydrodynamic separation or deterministic lateral displacement. Concerning the nature of the particles we observed a shift of transition towards the second regime likely due to the relationships between shear stress and polymersomes mechanical properties which could reduce the inhomogeneity imposed by the geometry of our device.

Challenges for the Self-Assembly of Poly(Ethylene Glycol)⁻Poly(Lactic Acid) (PEG-PLA) into Polymersomes: Beyond the Theoretical Paradigms

Polymersomes (PL), vesicles formed by self-assembly of amphiphilic block copolymers, have been described as promising nanosystems for drug delivery, especially of biomolecules. The film hydration method (FH) is widely used for PL preparation, however, it often requires long hydration times and commonly results in broad size distribution. In this work, we describe the challenges of the self-assembly of poly (ethylene glycol)-poly(lactic acid) (PEG-PLA) into PL by FH exploring different hydrophilic volume fraction (f) values of this copolymer, stirring times, temperatures and post-FH steps in an attempt to reduce broad size distribution of the nanostructures. We demonstrate that, alongside f value, the methods employed for hydration and post-film steps influence the PEG-PLA self-assembly into PL. With initial FH, we found high PDI values (>0.4). However, post-hydration centrifugation significantly reduced PDI to 0.280. Moreover, extrusion at higher concentrations resulted in further improvement of the monodispersity of the samples and narrow size distribution. For PL prepared at concentration of 0.1% (m/v), extrusion resulted in the narrower size distributions corresponding to PDI values of 0.345, 0.144 and 0.081 for PEG₄₅-PLA₆₉, PEG₁₁₄-PLA₁₅₃ and PEG₁₁₄-PLA₁₈₀, respectively. Additionally, we demonstrated that copolymers with smaller f resulted in larger PL and, therefore, higher encapsulation efficiency (EE%) for proteins, since larger vesicles enclose larger aqueous volumes.

Giant polymersomes from non-assisted film hydration of phosphate-based block copolymers

Polybutadiene-block-poly(ethyl ethylene phosphate) can reproducibly self-assemble in large number into giant unilamellar vesicles (GUVs) by non-assisted film hydration, representing a stepping stone for better liposomes – substitutes towards the generation of artificial cells.