Plasmonic nanoarchitectured systems for biomedical application

In this paper we discuss the latest developments in colloidal plasmonics, a field with over a century of history, applied to the biomedical sector. Emphasis is placed on the nanoarchitectonic nature of plasmonic systems that can be used for sensing, drug delivery and manipulation of biomolecules. For instance, quantum effects linked to plasmonic phenomena are being used to enhance monitoring of chiral particles and their interaction with light, which is essential for the pharmaceutical industry in reaching the required enantiopurity in some drugs. In diagnostics, radiofrequency waves can excite surface plasmon resonance through amplified photoacoustic effects, thus permitting thermo-acoustic imaging. An example of enhanced therapy was introduced in carefully designed nanoarchitectures where a multi-branched gold nanooctopus was surrounded by a mesoporous polydopamine and loaded with ribonucleoproteins for the target delivery into tumor cells. Moreover, the longstanding challenge of heating due to Ohmic losses, which has hindered the use of plasmonic tweezers for manipulating biologically relevant analytes, is now being exploited for enhanced trapping, manipulation, and transport of cells and other biological particles. The combination of magnetic materials and plasmonic colloids in the realms of magnetoplasmonics can also be explored in sensing and enhanced drug delivery, which further exemplifies the versatility of nanoarchitectonics.

Toward Hyphenated In Situ Infrared and Raman Spectroscopies in Interfacial Electrochemistry

To address the pressing demand for hyphenated in situ characterization of the electrode-electrolyte interfaces at the molecular level, we report herein a technical note to demonstrate the hyphenation of in situ electrochemical surface-enhanced infrared absorption spectroscopy (SEIRAS) and shell-isolated nanoparticle enhanced Raman spectroscopy (SHINERS). The core setup incorporates a top-down configured Raman optic fiber head loaded on a 3-dimension positioning module and a bottom-up configured attenuated total reflection infrared spectroscopy (ATR-IR) spectroelectrochemical cell accommodated in a custom-designed optical accessory. The feasibility of this integrated design is initially validated by the simultaneous measurement of two model systems, namely, potential dependent adsorption of pyridine on a Au film electrode and the CO2 reduction reaction on a Cu film electrode by in situ SEIRAS and SHINERS, yielding distinct and complementary spectral information.

A surface-enhanced infrared absorption spectroscopy (SEIRA) multivariate approach for atrazine detection

A green, fast and effective multivariate method for the determination of atrazine (ATZ) was developed using conventional infrared equipment furnished with an attenuated total reflectance module (ATR-IR), providing limit of detection (LOD) and limit of quantification (LOQ) in the ranges from 1.9 to 4.6 µg/mL and from 5.6 to 14 µg/mL, respectively. Furthermore, the surface-enhanced infrared absorption (SEIRA) approach was investigated to improve the sensitivity of the measurements and detect ATZ at low concentrations, addressing the compatibility with reference methods. To this end, a substrate formed by silver selenide quantum dots stabilized with mercaptopropionic acid (Ag2Se/MPA), synthesized in aqueous medium by an one-pot synthesis, was used. The spectral data were investigated by univariate and multivariate calibrations, allowing to calculate the enhancement factor (EF) and the multivariate enhancement factor (MEF), respectively. The SEIRA strategy proved to be able to enhance the atrazine signal up to 86-fold, allowing the detection of ATZ at concentrations as low as 0.001 µg/mL.

Surface-Enhanced Infrared Absorption Spectroscopy by Resonant Vibrational Coupling with Plasmonic Metal Oxide Nanocrystals

Coupling between plasmonic resonances and molecular vibrations in nanocrystals (NCs) offers a promising approach for detecting molecules at low concentrations and discerning their chemical identities. Metallic NC superlattices can enhance vibrational signals under far-field detection by generating a myriad of intensified electric field hot spots between the NCs. Yet, their effectiveness is limited by the fixed electron concentration dictated by the metal composition and inefficient hot spot creation due to the large mode volume. Doped metal oxide NCs, such as tin-doped indium oxide (ITO), could overcome these limitations by enabling broad tunability of resonance frequencies in the mid-infrared range through independent variation of size and doping concentration. This study investigates the potential of close-packed ITO NC monolayers for surface-enhanced infrared absorption by quantifying trends in the coupling between their plasmon modes and various molecular vibrations. We show that maximum vibrational signal intensity occurs in monolayers composed of larger, more highly doped NCs, where the plasmon resonance peak lies at higher frequency than the molecular vibration. Using finite element and mutual polarization methods, we establish that near-field enhancement is stronger on the low-frequency side of the plasmon resonance and for more strongly coupled plasmonic NCs, thus rationalizing the design rules we experimentally uncovered. Our results can guide the development of optimal metal oxide NC-based superstructures for sensing target molecules or modifying their chemical properties through vibrational coupling.

Plasmonic Nanostructure Biosensors: A Review

Plasmonic nanostructure biosensors based on metal are a powerful tool in the biosensing field. Surface plasmon resonance (SPR) can be classified into localized surface plasmon resonance (LSPR) and propagating surface plasmon polariton (PSPP), based on the transmission mode. Initially, the physical principles of LSPR and PSPP are elaborated. In what follows, the recent development of the biosensors related to SPR principle is summarized. For clarity, they are categorized into three groups according to the sensing principle: (i) inherent resonance-based biosensors, which are sensitive to the refractive index changes of the surroundings; (ii) plasmon nanoruler biosensors in which the distances of the nanostructure can be changed by biomolecules at the nanoscale; and (iii) surface-enhanced Raman scattering biosensors in which the nanostructure serves as an amplifier for Raman scattering signals. Moreover, the advanced application of single-molecule detection is discussed in terms of metal nanoparticle and nanopore structures. The review concludes by providing perspectives on the future development of plasmonic nanostructure biosensors.

Gold Nanostar Characterization by Nanoparticle Tracking Analysis

We demonstrate the application of nanoparticle tracking analysis (NTA) for the quantitative characterization of gold nanostars (GNSs). GNSs were synthesized by the seed-mediated growth method using triblock copolymer (TBP) gold nanoparticles (GNPs). These GNPs (≈ 10 nm) were synthesized from Au³⁺ (≈ 1 mM) in aqueous F127 (w/v 5%) containing the co-reductant ascorbic acid (≈ 2 mM). The GNS tip-to-core aspect ratio (AR) decreased when higher concentrations of GNPs were added to the growth solution. The AR dependency of GNSs on Au³⁺/Au(seed) concentration ratio implies that growth is partly under kinetic control. NTA measured GNS sizes, concentrations, and relative scattering intensities. Molar absorption coefficients ∼ 10⁹-10¹⁰ M^-1 cm^-1 (ε_400 nm) for each batch of GNSs were determined using the combination of extinction spectra and NTA concentrations for heterogeneous samples. NTA in combination with UV-vis was used to derive the linear relationships: (1) hydrodynamic size versus localized surface plasmon peak maxima; (2) ε_400 nm versus localized surface plasmon peak maxima; (3) ε_400 nm versus hydrodynamic size. NTA for quantitative characterization of anisotropic nanoparticles could lead to future applications, including heterogeneous colloidal catalysis.

Towards multi-molecular surface-enhanced infrared absorption using metal plasmonics

Surface-enhanced infrared absorption (SEIRA) leads to a largely improved detection of polar molecules, compared to standard infrared absorption. The enhancement principle is based on localized surface plasmon resonances of the substrate, which match the frequency of molecular vibrations in the analyte of interest. Therefore, in practical terms, the SEIRA sensor needs to be tailored to each specific analyte. We review SEIRA sensors based on metal plasmonics for the detection of biomolecules such as DNA, proteins, and lipids. We further focus this review on chemical SEIRA sensors, with potential applications in quality control, as well as on the improvement in sensor geometry that led to the development of multiresonant SEIRA substrates as sensors for multiple analytes. Finally, we give an introduction into the integration of SEIRA sensors with surface-enhanced Raman scattering (SERS).

Metasurface Micro/Nano-Optical Sensors: Principles and Applications

Metasurfaces are 2D artificial materials consisting of arrays of metamolecules, which are exquisitely designed to manipulate light in terms of amplitude, phase, and polarization state with spatial resolutions at the subwavelength scale. Traditional micro/nano-optical sensors (MNOSs) pursue high sensitivity through strongly localized optical fields based on diffractive and refractive optics, microcavities, and interferometers. Although detections of ultra-low concentrations of analytes have already been demonstrated, the label-free sensing and recognition of complex and unknown samples remain challenging, requiring multiple readouts from sensors, e.g., refractive index, absorption/emission spectrum, chirality, etc. Additionally, the reliability of detecting large, inhomogeneous biosamples may be compromised by the limited near-field sensing area from the localization of light. Here, we review recent advances in metasurface-based MNOSs and compare them with counterparts using micro-optics from aspects of physics, working principles, and applications. By virtue of underlying the physics and design flexibilities of metasurfaces, MNOSs have now been endowed with superb performances and advanced functionalities, leading toward highly integrated smart sensing platforms.

Identification of milk quality and adulteration by surface-enhanced infrared absorption spectroscopy coupled to artificial neural networks using citrate-capped silver nanoislands

Milk is one of the most important multicomponent superfoods owing to its rich macronutrient composition. It requires quality control at all the production stages from the farm to the finished products. A localized surface plasmon resonance optical sensor based on a citrate-capped silver nanoparticle (Cit-AgNP)–coated glass substrate was developed. The fabrication of such sensors involved a single-step synthesis of Cit-AgNPs followed by surface modification of glass slides to be coated with the nanoparticles. The scanning electron microscope micrographs demonstrated that the nanoparticles formed monolayer islands on glass slides. The developed surface-enhanced infrared absorption spectroscopy (SEIRA) sensor was coupled to artificial neural networking (ANN) for the qualitative differentiation between cow, camel, goat, buffalo, and infants’ formula powdered milk types. Moreover, it can be used for the quantitative determination of the main milk components such as fat, casein, urea, and lactose in each milk type. The qualitative results showed that the obtained FTIR spectra of cow and buffalo milk have high similarity, whereas camel milk resembled infant formula powdered milk. The most difference in FTIR characteristics was evidenced in the case of goat milk. The developed sensor adds several advantages over the traditional techniques of milk analysis using MilkoScan™ such as less generated waste, elimination of pre-treatment steps, minimal sample volume, low operation time, and on-site analysis.

Plasmonic nanosensors for point-of-care biomarker detection

Advancement of materials along with their fascinating properties play increasingly important role in facilitating the rapid progress in medicine. An excellent example is the recent development of biosensors based on nanomaterials that induce surface plasmon effect for screening biomarkers of various diseases ranging from cancer to Covid-19. The recent global pandemic re-confirmed the trend of real-time diagnosis in public health to be in point-of-care (POC) settings that can screen interested biomarkers at home, or literally anywhere else, at any time. Plasmonic biosensors, thanks to its versatile designs and extraordinary sensitivities, can be scaled into small and portable devices for POC diagnostic tools. In the meantime, efforts are being made to speed up, simplify and lower the cost of the signal readout process including converting the conventional heavy laboratory instruments into lightweight handheld devices. This article reviews the recent progress on the design of plasmonic nanomaterial-based biosensors for biomarker detection with a perspective of POC applications. After briefly introducing the plasmonic detection working mechanisms and devices, the selected highlights in the field focusing on the technology's design including nanomaterials development, structure assembly, and target applications are presented and analyzed. In parallel, discussions on the sensor's current or potential applicability in POC diagnosis are provided. Finally, challenges and opportunities in plasmonic biosensor for biomarker detection, such as the current Covid-19 pandemic and its testing using plasmonic biosensor and incorporation of machine learning algorithms are discussed.

Two orders of magnitude extra SERS enhancement on silver nanoparticle-based substrate induced by laser irradiation in nitrogen ambient

Photo-reduction of silver oxide and light-induced Ag nanoparticle (NP) generations have been applied for Surface-enhanced Raman spectroscopy (SERS) substrate fabricated for years. In this paper, we demonstrate a general method to enhance the SERS activity of conventional Ag NPs-based SERS substrates by performing Raman scattering measurement in a nitrogen ambient after a period of laser irradiation (photoactivation). The Raman characteristic peak intensity of carbonaceous impurities adsorbed on the surfaces of Ag NPs display an additional enhancement of 93 times after photoactivation in nitrogen ambient. A 3-fold extra Raman gain enhancement is also observed in the nitrogen-protected SERS measurement of R6G molecules. The extra SERS enhancement is attributed to the sub-nanometer scale near-field coupling between the Ag NPs and the photo-generated Ag clusters in the surface oxide layer of Ag NPs. This model is verified through the finite-difference time-domain (FDTD) simulations.

Optimization of localized surface plasmon resonance hot spots in surface-enhanced infrared absorption spectroscopy aluminum substrate as an optical sensor coupled to chemometric tools for the purity assay of quinary mixtures

Surface-enhanced infrared absorption spectroscopy offers an alternative to conventional IR spectroscopy and utilizes the signal enhancement exerted by the plasmon resonance of nanostructured metal thin films. Citrate-capped silver nanoparticles were prepared in a single-step method, and their morphology was identified using transmission electron microscopy, scanning electron microscopy, ultraviolet/visible spectrophotometry, and Zetasizer. The nanoparticles generated were deposited on the surface of cheap aluminum slides for different durations aiming for the selection of the best time producing a thin film, suitable to act as a lab-on-a-chip SEIRA substrate. These substrates were coupled to partial least squares regression tools for simultaneous resolving of the quinary mixture in commercial dosage forms of bisoprolol, perindopril, bisoprolol acid degradation product, bisoprolol alkali degradation product, and perindoprilat in concentration ranges of 15-75, 60-300, 15-55, 12-60, and 20-80 μg/mL with limits of detection values of 0.69, 3.43, 0.97, 1.25, and 1.09 μg/mL, respectively. Overall, we could demostrate that the localized surface plasmon resonance sensor coupled to chemometrics provides cheap, simple, selective, multiplex, rapid, and molecular specific procedures for impurity detection, which would be beneficial in many applications for quality control and quality accuracy of active pharmaceutical ingredients.

Recent developments on gold nanostructures for surface enhanced Raman spectroscopy: Particle shape, substrates and analytical applications. A review

Surface enhanced Raman spectroscopy (SERS) is a powerful technique for sensitive analysis which is attracting great attention in the last decades. In this review, different gold nanostructures that have been exploited for SERS analysis are described, ranging from gold nanospheres to anisotropic and complex-shaped gold nanostructures, in which the presence of high aspect ratio features leads to an increment of the electromagnetic field at the surface of the nanomaterial, resulting in enhanced SERS response. In addition to the shape of the nanostructure, the interparticle nanogaps play a prominent role in the SERS efficiency. In this sense, different approaches such as nanoaggregation and formation of assemblies and ordered structures lead to the creation of the so-called hot spots. SERS measurements may be performed in solution, while usually the nanostructures are deposited building a SERS substrate, which can be created via attachment of chemically prepared gold nanostructures, as well as via top-down physical methods. Among the classical supports for creating the SERS substrates, in the last years there is a trend towards the development of flexible supports based on polymers as well as paper. Finally, some recent applications of gold nanostructures-based SERS substrates within the analytical field are discussed to spotlight the potential of this technique in real-world analytical scenarios.

A facile route toward hydrophilic plasmonic copper selenide nanocrystals: new perspectives for SEIRA applications

Development of versatile and efficient plasmonic nanoprobes for detection of (bio)molecules in an ultrasmall concentration, when applied as substrates in surface-enhanced infrared (SEIRA) spectroscopy.

Hybrid Gold Nanoparticle-Polyoxovanadate Matrices: A Novel Surface Enhanced Raman/Surface Enhanced Infrared Spectroscopy Substrate

Bare gold nanoparticles were embedded into an iron-polyoxovanadate matrix and used to enhance both the infrared and Raman signatures of a model analyte. A detailed characterization of the matrix-embedded nanoparticles revealed that they retained a plasmon resonance at 564 nm. The enhancement of vibrational signatures of the model analyte crystal violet using bare and embedded gold nanoparticles was compared for both surface enhanced infrared (SEIRA) spectroscopy and surface enhanced Raman spectroscopy (SERS) yielding enhancement factors of 2.2 for SEIRA and 77 for SERS. In contrast, the bare gold nanoparticles revealed significantly lower enhancements (1.6 for SEIRA; 20 for SERS). Hence, it was shown that embedding nanoparticles within an inorganic polyoxometalate-based matrix is an innovative strategy to amplify their signal enhancement properties in vibrational spectroscopies.

Large-area periodic arrays of gold nanostars derived from HEPES-, DMF-, and ascorbic-acid-driven syntheses

With arms radiating from a central core, gold nanostars represent a unique and fascinating class of nanomaterials from which extraordinary plasmonic properties are derived. Despite their relevance to sensing applications, methods for fabricating homogeneous populations of nanostars on large-area planar surfaces in truly periodic arrays is lacking. Herein, the fabrication of nanostar arrays is demonstrated through the formation of hexagonal patterns of near-hemispherical gold seeds and their subsequent exposure to a liquid-state chemical environment that is conducive to colloidal nanostar formation. Three different colloidal nanostar protocols were targeted where HEPES, DMF, and ascorbic acid represent a key reagent in their respective redox chemistries. Only the DMF-driven synthesis proved readily adaptable to the substrate-based platform but nanostar-like structures emerged from the other protocols when synthetic controls such as reaction kinetics, the addition of Ag⁺ ions, and pH adjustments were applied. Because the nanostars were derived from near-hemispherical seeds, they acquired a unique geometry that resembles a conventional nanostar that has been truncated near its midsection. Simulations of plasmonic properties of this geometry reveal that such structures can exhibit maximum near-field intensities that are as much as seven-times greater than the standard nanostar geometry, a finding that is corroborated by surface-enhanced Raman scattering (SERS) measurements showing large enhancement factors. The study adds nanostars to the library of nanostructure geometries that are amenable to large-area periodic arrays and provides a potential pathway for the nanofabrication of SERS substrates with even greater enhancements.

Gallium arsenide waveguides as a platform for direct mid-infrared vibrational spectroscopy

During recent years, mid-infrared (MIR) spectroscopy has matured into a versatile and powerful sensing tool for a wide variety of analytical sensing tasks. Attenuated total reflection (ATR) techniques have gained increased interest due to their potential to perform non-destructive sensing tasks close to real time. In ATR, the essential component is the sampling interface, i.e., the ATR waveguide and its material properties interfacing the sample with the evanescent field ensuring efficient photon-molecule interaction. Gallium arsenide (GaAs) is a versatile alternative material vs. commonly used ATR waveguide materials including but not limited to silicon, zinc selenide, and diamond. GaAs-based internal reflection elements (IREs) are a new generation of semiconductor-based waveguides and are herein used for the first time in direct spectroscopic applications combined with conventional Fourier transform infrared (FT-IR) spectroscopy. Next to the characterization of the ATR waveguide, exemplary surface reactions were monitored, and trace-level analyte detection via signal amplification taking advantage of surface-enhanced infrared absorption (SEIRA) effects was demonstrated. As an example of real-world relevance, the mycotoxin aflatoxin B1 (AFB1) was used as a model analyte in food and feed safety analysis.

Tackling the Scalability Challenge in Plasmonics by Wrinkle-Assisted Colloidal Self-Assembly

Electromagnetic radiation of a certain frequency can excite the collective oscillation of the free electrons in metallic nanostructures using localized surface plasmon resonances (LSPRs), and this phenomenon can be used for a variety of optical and electronic functionalities. However, nanostructure design over a large area using controlled LSPR features is challenging and requires high accuracy. In this article, we offer an overview of the efforts made by our group to implement a wrinkle-assisted colloidal particle assembly method to approach this challenge from a different angle. First, we introduce the controlled wrinkling process and discuss the underlying theoretical framework. We then set out how the wrinkled surfaces are utilized to guide the self-assembly of colloidal nanoparticles of various surface chemistry, size, and shape. Subsequently, template-assisted colloidal self-assembly mechanisms and a general guide for particle assembly beyond plasmonics will be presented. In addition, we also discuss the collective plasmonic behavior in depth, including strong plasmonic coupling due to nanoscale gap size as well as magnetic mode excitation and demonstrate the potential applications of wrinkle-assisted colloidal particle assembly method in the field of mechanoresponsive metasurfaces and surface-enhanced spectroscopy. Lastly, a general perspective in the field of template-assisted colloidal assembly with regard to potential applications in plasmonic photocatalysis, solar cells, optoelectronics, and sensing devices is provided.

Advancements in fractal plasmonics: structures, optical properties, and applications

Fractal nanostructures exhibit optical properties that span the visible to far-infrared and are emerging as exciting structures for plasmon-mediated applications.

Gradient metal nanoislands as a unified surface enhanced Raman scattering and surface enhanced infrared absorption platform for analytics

A metal nanoisland layer with varying plasmonic responses offers surface enhanced Raman scattering and infrared absorption optimal sites on a single surface.

Gold-nanostar-based SERS substrates for studying protein aggregation processes

Aggregation of proteins has been related to some neurodegenerative diseases such as Alzheimer's and Parkinson's among others. Raman spectroscopy is a useful technique for the investigation of protein conformation and of changes in their secondary structure. In this study, a surface enhanced Raman spectroscopy (SERS) substrate based on the immobilization of plasmonic gold nanostars on a glass slide via silanization of the surface has been prepared and characterized. Gold nanostars were synthesized via a seed-growth method using gold nanoparticles as seeds obtained via stainless steel as the reducing agent. The plasmonic substrate provided an enhancement of 5.7 × 102 fold, as shown for the Raman signal of crystal violet. Using this SERS-active substrate, the investigation of aggregation processes of bovine serum albumin (BSA) and myoglobin proteins upon temperature and solvent modification has been enabled with enhanced sensitivity. Both curve fitting and deconvolution of the amide I band, as well as 2D correlation analysis, were employed for the evaluation of the changes in the SERS spectra of the protein samples. The amide I band within the SERS spectra of the BSA protein revealed a decrease in the α-helix structures within the secondary structure of the protein while the presence of β-sheet structures increased with temperature and solvent concentration.

Novel strategy for fabrication of sensing layer on thiol-functionalized fiber-optic tapers and their application as SERS probes

This work presents a new strategy to fabricate optical fiber surface-enhanced Raman scattering (SERS) probes with high-performance remote sensing prepared by thiol functionalization of silica fiber taper, and further in situ nucleation and growth of silver nanoparticles (AgNPs). The prepared fiber probes can effectively identify the analyte 4-aminothiophenol (4-ATP) with a limit of detection (LOD) as low as 2.15 × 10^-11 M using a portable commercial Raman spectrometer. Simultaneously, such fiber probes have shown a good reproducibility with the relative standard deviation (RSD) value of 7.6%, and possessed high signal stability at room temperature over one month. Furthermore, this approach provides new insight into the fabrication of fiber SERS probe integrated the advantages in terms of sensitivity, reproducibility and stability, which shows great potential for practical SERS applications.

How to accurately predict solution-phase gold nanostar stability

Unwanted nanoparticle aggregation and/or agglomeration may occur when anisotropic nanoparticles are dispersed in various solvents and matrices. While extended Derjaguin-Landau-Verwey-Overbeek (DLVO) theory has been successfully applied to predict nanoparticle stability in solution, this model fails to accurately predict the physical stability of anisotropic nanostructures; thus limiting its applicability in practice. Herein, DLVO theory was used to accurately predict gold nanostar stability in solution by investigating how the choice of the nanostar dimension considered in calculations influences the calculated attractive and repulsive interactions between nanostructures. The use of the average radius of curvature of the nanostar tips instead of the average radius as the nanostar dimension of interest increases the accuracy with which experimentally observed nanoparticle behavior can be modeled theoretically. This prediction was validated by measuring time-dependent localized surface plasmon resonance (LSPR) spectra of gold nanostars suspended in solutions with different ionic strengths. Minimum energy barriers calculated from collision theory as a function of nanoparticle concentration were utilized to make kinetic predictions. All in all, these studies suggest that choosing the appropriate gold nanostar dimension is crucial to fully understanding and accurately predicting the stability of anisotropic nanostructures such as gold nanostars; i.e., whether the nanostructures remain stable and can be used reproducibly, or whether they aggregate and exhibit inconsistent results. Thus, the present work provides a deeper understanding of internanoparticle interactions in solution and is expected to lead to more consistent and efficient analytical and bioanalytical applications of these important materials in the future. Graphical abstract ᅟ.

Graphene-assisted multilayer structure employing hybrid surface plasmon and magnetic plasmon for surface-enhanced vibrational spectroscopy

A graphene-assisted vertical multilayer structure is proposed for high performance surface-enhanced Raman scattering (SERS) and surface-enhanced infrared absorption (SEIRA) spectroscopies on a single substrate, employing simultaneous localized surface plasmon in the visible region and magnetic plasmon resonance in the mid-infrared region. Such multilayer structure consists of a monolayer graphene sandwiched between Ag nanoparticles (NPs) and a metal-insulator-metal (MIM) microstructure, which can be easily fabricated by a standard surface micromachining process. Benefiting from the large near field enhancement by the hybrid plasmons in both visible and mid-infrared regions, a high enhancement factor of up to 10⁷ for SERS and 10⁵ for SEIRA can be achieved. Additionally, the strong magnetic resonance of the MIM microstructure can be tuned in broadband to selectively enhance the desired vibration modes of molecules. The strong SERS and SEIRA enhancement together with easy fabrication provides new opportunities for developing integrated plasmonic devices for multispectral detection of molecules on the same substrate.

Plasmonic Optical Imaging of Gold Nanorods Localization in Small Animals

Gold nanoparticles (GNP) have been intensively investigated for applications in cancer imaging and therapy. Most imaging studies focused on microscopic imaging. Their potential as optical imaging probes for whole body small animal imaging has rarely been explored. Taking advantage of their surface plasmon resonance (SPR) properties, we aim to develop a noninvasive diffuse optical imaging method to map the distribution of a special type of GNP, gold nanorods (GNR), in small animals. We developed an integrated dual-modality imaging system capable of both x-ray computed tomography (XCT) and diffuse optical tomography (DOT). XCT provides the animal anatomy and contour required for DOT; DOT maps the distribution of GNR in the animal. This SPR enhanced optical imaging (SPROI) technique was investigated using simulation, phantom and mouse experiments. The distribution of GNR at various concentrations (0.1-100 nM, or 3.5 ug/g-3.5 mg/g) was successfully reconstructed from centimeter-scaled volumes. SPROI detected GNR at 18 μg/g concentration in the mouse breast tumor, and is 3 orders more sensitive than x-ray imaging. This study demonstrated the high sensitivity of SPROI in mapping GNR distributions in small animals. It does not require additional imaging tags other than GNR themselves. SPROI can be used to detect tumors targeted by GNR via passive targeting based on enhanced permeability and retention or via active targeting using biologically conjugated ligands.

New trends in plasmonic (bio)sensing

The strong enhancement and localization of electromagnetic field in plasmonic systems have found applications in many areas, which include sensing and biosensing. In this paper, an overview will be provided of the use of plasmonic phenomena in sensors and biosensors with emphasis on two main topics. The first is related to possible ways to enhance the performance of sensors and biosensors based on surface plasmon resonance (SPR), where examples are given of functionalized magnetic nanoparticles, magnetoplasmonic effects and use of metamaterials for SPR sensing. The other topic is focused on surface-enhanced Raman scattering (SERS) for sensing, for which uniform, flexible, and reproducible SERS substrates have been produced. With such recent developments, there is the prospect of improving sensitivity and lowering the limit of detection in order to overcome the limitations inherent in ultrasensitive detection of chemical and biological analytes, especially at single molecule levels.

Review of SERS Substrates for Chemical Sensing

The SERS effect was initially discovered in the 1970s. Early research focused on understanding the phenomenon and increasing enhancement to achieve single molecule detection. From the mid-1980s to early 1990s, research started to move away from obtaining a fundamental understanding of the phenomenon to the exploration of analytical applications. At the same time, significant developments occurred in the field of photonics that led to the advent of inexpensive, robust, compact, field-deployable Raman systems. The 1990s also saw rapid development in nanoscience. This convergence of technologies (photonics and nanoscience) has led to accelerated development of SERS substrates to detect a wide range of chemical and biological analytes. It would be a monumental task to discuss all the different kinds of SERS substrates that have been explored. Likewise, it would be impossible to discuss the use of SERS for both chemical and biological detection. Instead, a review of the most common metallic (Ag, Cu, and Au) SERS substrates for chemical detection only is discussed, as well as SERS substrates that are commercially available. Other issues with SERS for chemical detection have been selectivity, reversibility, and reusability of the substrates. How these issues have been addressed is also discussed in this review.

Plasmonic nanoparticles in chemical analysis

In this review various analytical techniques utilising the plasmonic properties of silver and gold nanoparticles have been presented.