Quantum dot-NanoLuc bioluminescence resonance energy transfer enables tumor imaging and lymph node mapping in vivo

Nanocrystals for Deep-Tissue In Vivo Luminescence Imaging in the Near-Infrared Region

In vivo imaging technologies have emerged as a powerful tool for both fundamental research and clinical practice. In particular, luminescence imaging in the tissue-transparent near-infrared (NIR, 700-1700 nm) region offers tremendous potential for visualizing biological architectures and pathophysiological events in living subjects with deep tissue penetration and high imaging contrast owing to the reduced light-tissue interactions of absorption, scattering, and autofluorescence. The distinctive quantum effects of nanocrystals have been harnessed to achieve exceptional photophysical properties, establishing them as a promising category of luminescent probes. In this comprehensive review, the interactions between light and biological tissues, as well as the advantages of NIR light for in vivo luminescence imaging, are initially elaborated. Subsequently, we focus on achieving deep tissue penetration and improved imaging contrast by optimizing the performance of nanocrystal fluorophores. The ingenious design strategies of NIR nanocrystal probes are discussed, along with their respective biomedical applications in versatile in vivo luminescence imaging modalities. Finally, thought-provoking reflections on the challenges and prospects for future clinical translation of nanocrystal-based in vivo luminescence imaging in the NIR region are wisely provided.

Self-Luminous Probe with One-Step Energy Conversion from Bioluminescence to NIR-IIb

Self-luminous probes with near-infrared (NIR) emission are powerful tools for deep-penetration and autofluorescence-free imaging, owing to the joint optimization of both excitation and emission. However, the limited emission wavelength and requirement for multistep energy transfer limit its potency. In this study, the concept of direct wavelength conversion is established from visible light (vis) to NIR-IIb using an exquisitely designed sensitizer-activator ion pair. The manipulation of the doping hosts enables a pair of energy levels between the sensitizer and activator. Based on this a class of broadband vis-responsive nanocrystals with intense NIR-II emission is prepared. The stability and quantum yield (up to 7.4%) of the nanocrystals are further enhanced by ZnS passivation via coherent epitaxial growth. By coupling luciferase, the self-luminous probe can convert bioluminescence to NIR-IIb luminescence (>1500 nm) through a one-step energy transfer. A maximum penetrable thickness of 6 mm is achieved in the porcine tissue model. Collectively, the distinctive photon-conversion performance of this probe offers the prospect of high-resolution labeling of deep-seated lesions.

Imaging Techniques in Pharmacological Precision Medicine

Biomedical imaging is a powerful tool for medical diagnostics and personalized medicines. Examples of commonly used imaging modalities include Positron Emission Tomography (PET), Ultrasound (US), Single Photon Emission Computed Tomography (SPECT), and hybrid imaging. By combining these modalities, scientists can gain a comprehensive view and better understand physiology and pathology at the preclinical, clinical, and multiscale levels. This can aid in the accuracy of medical diagnoses and treatment decisions. Moreover, biomedical imaging allows for evaluating the metabolic, functional, and structural details of living tissues. This can be particularly useful for the early diagnosis of diseases such as cancer and for the application of personalized medicines. In the case of hybrid imaging, two or more modalities are combined to produce a high-resolution image with enhanced sensitivity and specificity. This can significantly improve the accuracy of diagnosis and offer more detailed treatment plans. In this book chapter, we showcase how continued advancements in biomedical imaging technology can potentially revolutionize medical diagnostics and personalized medicine.

Mechanical Unfolding and Refolding of NanoLuc via Single-Molecule Force Spectroscopy and Computer Simulations

A highly bioluminescent protein, NanoLuc (Nluc), has seen numerous applications in biological assays since its creation. We recently engineered a NanoLuc polyprotein that showed high bioluminescence but displayed a strong misfolding propensity after mechanical unfolding. Here, we present our single-molecule force spectroscopy (SMFS) studies by atomic force microscopy (AFM) and steered molecular dynamics (SMD) simulations on two new hybrid protein constructs comprised of Nluc and I91 titin domains, I91-I91-Nluc-I91-I91-I91-I91 (I91₂-Nluc-I91₄) and I91-Nluc-I91-Nluc-I91-Nluc-I91, to characterize the unfolding behavior of Nluc in detail and to further investigate its misfolding properties that we observed earlier for the I91₂-Nluc₃-I91₂ construct. Our SMFS results confirm that Nluc's unfolding proceeds similarly in all constructs; however, Nluc's refolding differs in these constructs, and its misfolding is minimized when Nluc is monomeric or separated by I91 domains. Our simulations on monomeric Nluc, Nluc dyads, and Nluc triads pinpointed the origin of its mechanical stability and captured interesting unfolding intermediates, which we also observed experimentally.

Self-illuminating NIR-II bioluminescence imaging probe based on silver sulfide quantum dots

Bioluminescence (BL) imaging has emerged to tackle the potential challenges of fluorescence (FL) imaging including the autofluorescence background, inhomogeneous illumination over a wide imaging field, and the light-induced overheating effect. Taking advantage of the bioluminescence resonance energy transfer (BRET) mechanism between a conventional luciferin compound and a suitable acceptor, the visible light of the former can be extended to photons with longer wavelengths emitting from the latter. Although BRET-based self-illuminating imaging probes have already been prepared, employing potentially cytotoxic elements as the acceptor with the emission wavelengths which hardly reach the first near-infrared (NIR-I) window, has limited their applications as safe and high performance in vivo imaging agents. Herein, we report a biocompatible, self-illuminating, and second near-infrared (NIR-II) emissive probe to address the cytotoxicity concerns as well as improve the penetration depth and spatiotemporal resolution of BL imaging. To this end, NanoLuc luciferase enzyme molecules were immobilized on the surface of silver sulfide quantum dots to oxidize its luciferin substrate and initiate a single-step BRET mechanism, resulting in NIR-II photons from the quantum dots. The resulting dual modality (BL/FL) probes were successfully applied to in vivo tumor imaging in mice, demonstrating that NIR-II BL signals could be easily detected from the tumor sites, giving rise to ∼2 times higher signal-to-noise ratios compared to those obtained under FL mode. The results indicated that nontoxic NIR-II emitting nanocrystals deserve more attention to be tailored to fill the growing demands of preparing appropriate agents for high quality BL imaging.

Macromolecular assembly of bioluminescent protein nanoparticles for enhanced imaging

Bioluminescence imaging has advantages over fluorescence imaging, such as minimal photobleaching and autofluorescence, and greater signal-to-noise ratios in many complex environments. Although significant achievements have been made in luciferase engineering for generating bright and stable reporters, the full capability of luciferases for nanoparticle tracking has not been comprehensively examined. In biocatalysis, enhanced enzyme performance after immobilization on nanoparticles has been reported. Thus, we hypothesized that by assembling luciferases onto a nanoparticle, the resulting complex could lead to substantially improved imaging properties. Using a modular bioconjugation strategy, we attached NanoLuc (NLuc) or Akaluc bioluminescent proteins to a protein nanoparticle platform (E2), yielding nanoparticles NLuc-E2 and Akaluc-E2, both with diameters of ∼45 ​nm. Although no significant differences were observed between different conditions involving Akaluc and Akaluc-E2, free NLuc at pH 5.0 showed significantly lower emission values than free NLuc at pH 7.4. Interestingly, NLuc immobilization on E2 nanoparticles (NLuc-E2) emitted increased luminescence at pH 7.4, and at pH 5.0 showed over two orders of magnitude (>200-fold) higher luminescence (than free NLuc), expanding the potential for imaging detection using the nanoparticle even upon endocytic uptake. After uptake by macrophages, the resulting luminescence with NLuc-E2 nanoparticles was up to 7-fold higher than with free NLuc at 48 ​h. Cells incubated with NLuc-E2 could also be imaged using live bioluminescence microscopy. Finally, biodistribution of nanoparticles into lymph nodes was detected through imaging using NLuc-E2, but not with conventionally-labeled fluorescent E2. Our data demonstrate that NLuc-bound nanoparticles have advantageous properties that can be utilized in applications ranging from single-cell imaging to in vivo biodistribution.

Engineered Amber-Emitting Nano Luciferase and Its Use for Immunobioluminescence Imaging In Vivo

The NanoLuc luciferase (NLuc) and its furimazine (FRZ) substrate have revolutionized bioluminescence (BL) assays and imaging. However, the use of the NLuc-FRZ luciferase-luciferin pair for mammalian tissue imaging is hindered by the low tissue penetration of the emitting blue photons. Here, we present the development of an NLuc mutant, QLuc, which catalyzes the oxidation of a synthetic QTZ luciferin for bright and red-shifted emission peaking at ∼585 nm. Compared to other small single-domain NLuc mutants, this amber-light-emitting luciferase exhibited improved performance for imaging deep-tissue targets in live mice. Leveraging this novel bioluminescent reporter, we further pursued in vivo immunobioluminescence imaging (immunoBLI), which used a fusion protein of a single-chain variable antibody fragment (scFv) and QLuc for molecular imaging of tumor-associated antigens in a xenograft mouse model. As one of the most red-shifted NLuc variants, we expect QLuc to find broad applications in noninvasive mammalian imaging. Moreover, the immunoBLI method complements immunofluorescence imaging and immuno-positron emission tomography (immunoPET), serving as a convenient and nonradioactive molecular imaging tool for animal models in basic and preclinical research.

Lymph Node Mapping for Tumor Micrometastasis

Lymph node mapping for tumor micrometastasis is of great significance for the prevention, prognosis, and treatment of cancer. Currently, the traditional clinical detection methods (computed tomography, magnetic resonance imaging, or positron emission tomography/computed tomography) in clinical lymph node mapping still have some inherent disadvantages, which have prompted the development of various fluorescent probes for lymph node mapping. However, the conventional fluorescent probes such as indocyanine green or methylene blue in lymph node mapping are still accompanied by several problems such as impaired surgical field vision due to dye staining or less accumulation and shorter retention time in the lymph node. In a recent achievement, newly designed nanoparticles are prepared with novel properties that could be attractive for lymph node mapping. In this review, we will provide details on the progress of various nanoparticles for lymph node mapping and emphasize other multivariant properties in different nanoparticles, including strong tumor-targeting affinity and specificity, self-luminescence, and even with the function to kill metastatic cancer cells.

BRET-Based Dual-Color (Visible/Near-Infrared) Molecular Imaging Using a Quantum Dot/EGFP-Luciferase Conjugate

By virtue of its high sensitivity, bioluminescence imaging (BLI) is an important tool for biosensing and bioimaging in life sciences. Compared to fluorescence imaging (FLI), BLI has a superior advantage that the background signals resulting from autofluorescence are almost zero due to the unnecessity of external excitation. In addition, BLI can permit a long-term observation of living cells because BL results in very low photocytotoxicity toward the host cells. Although BLI has such superior properties over FLI, the available wavelengths in BLI are mostly limited to the visible region. Here we present bioluminescence resonance energy transfer (BRET)-based visible and near-infrared dual-color molecular imaging using a quantum dot (QD) and luciferase-protein conjugate.

Molecular Probes for Autofluorescence-Free Optical Imaging

Optical imaging is an indispensable tool in clinical diagnostics and fundamental biomedical research. Autofluorescence-free optical imaging, which eliminates real-time optical excitation to minimize background noise, enables clear visualization of biological architecture and physiopathological events deep within living subjects. Molecular probes especially developed for autofluorescence-free optical imaging have been proven to remarkably improve the imaging sensitivity, penetration depth, target specificity, and multiplexing capability. In this Review, we focus on the advancements of autofluorescence-free molecular probes through the lens of particular molecular or photophysical mechanisms that produce long-lasting luminescence after the cessation of light excitation. The versatile design strategies of these molecular probes are discussed along with a broad range of biological applications. Finally, challenges and perspectives are discussed to further advance the next-generation autofluorescence-free molecular probes for in vivo imaging and in vitro biosensors.

Engineering with NanoLuc: a playground for the development of bioluminescent protein switches and sensors

The small engineered luciferase NanoLuc has rapidly become a powerful tool in the fields of biochemistry, chemical biology, and cell biology due to its exceptional brightness and stability. The continuously expanding NanoLuc toolbox has been employed in applications ranging from biosensors to molecular and cellular imaging, and currently includes split complementation variants, engineering techniques for spectral tuning, and bioluminescence resonance energy transfer-based concepts. In this review, we provide an overview of state-of-the-art NanoLuc-based sensors and switches with a focus on the underlying protein engineering approaches. We discuss the advantages and disadvantages of various strategies with respect to sensor sensitivity, modularity, and dynamic range of the sensor and provide a perspective on future strategies and applications.

Methods for Intracellular Delivery of Quantum Dots

Quantum dots (QDs) have attracted considerable attention as fluorescent probes for life sciences. The advantages of using QDs in fluorescence-based studies include high brilliance, a narrow emission band allowing multicolor labeling, a chemically active surface for conjugation, and especially, high photostability. Despite these advantageous features, the size of the QDs prevents their free transport across the plasma membrane, limiting their use for specific labeling of intracellular structures. Over the years, various methods have been evaluated to overcome this issue to explore the full potential of the QDs. Thus, in this review, we focused our attention on physical and biochemical QD delivery methods-electroporation, microinjection, cell-penetrating peptides, molecular coatings, and liposomes-discussing the benefits and drawbacks of each strategy, as well as presenting recent studies in the field. We hope that this review can be a useful reference source for researches that already work or intend to work in this area. Strategies for the intracellular delivery of quantum dots discussed in this review (electroporation, microinjection, cell-penetrating peptides, molecular coatings, and liposomes).

Applications of bioluminescence in biotechnology and beyond

Bioluminescent probes have hugely benefited from the input of synthetic chemistry and protein engineering. Here we review the latest applications of these probes in biotechnology and beyond, with an eye on current limitations and future directions.

Coelenterazine-Dependent Luciferases as a Powerful Analytical Tool for Research and Biomedical Applications

: The functioning of bioluminescent systems in most of the known marine organisms is based on the oxidation reaction of the same substrate-coelenterazine (CTZ), catalyzed by luciferase. Despite the diversity in structures and the functioning mechanisms, these enzymes can be united into a common group called CTZ-dependent luciferases. Among these, there are two sharply different types of the system organization-Ca2+-regulated photoproteins and luciferases themselves that function in accordance with the classical enzyme-substrate kinetics. Along with deep and comprehensive fundamental research on these systems, approaches and methods of their practical use as highly sensitive reporters in analytics have been developed. The research aiming at the creation of artificial luciferases and synthetic CTZ analogues with new unique properties has led to the development of new experimental analytical methods based on them. The commercial availability of many ready-to-use assay systems based on CTZ-dependent luciferases is also important when choosing them by first-time-users. The development of analytical methods based on these bioluminescent systems is currently booming. The bioluminescent systems under consideration were successfully applied in various biological research areas, which confirms them to be a powerful analytical tool. In this review, we consider the main directions, results, and achievements in research involving these luciferases.

Pulmonary-arterial-hypertension (PAH)-on-a-chip: fabrication, validation and application

Currently used animal and cellular models for pulmonary arterial hypertension (PAH) only partially recapitulate its pathophysiology in humans and are thus inadequate in reproducing the hallmarks of the disease, inconsistent in portraying the sex-disparity, and unyielding to combinatorial study designs. Here we sought to deploy the ingenuity of microengineering in developing and validating a tissue chip model for human PAH. We designed and fabricated a microfluidic device to emulate the luminal, intimal, medial, adventitial, and perivascular layers of a pulmonary artery. By growing three types of pulmonary arterial cells (PACs)-endothelial, smooth muscle, and adventitial cells, we recreated the PAH pathophysiology on the device. Diseased (PAH) PACs, when grown on the chips, moved of out their designated layers and created phenomena similar to the major pathologies of human PAH: intimal thickening, muscularization, and arterial remodeling and show an endothelial to mesenchymal transition. Flow-induced stress caused control cells, grown on the chips, to undergo morphological changes and elicit arterial remodeling. Our data also suggest that the newly developed chips can be used to elucidate the sex disparity in PAH and to study the therapeutic efficacy of existing and investigational anti-PAH drugs. We believe this miniaturized device can be deployed for testing various prevailing and new hypotheses regarding the pathobiology and drug therapy in human PAH.

Advanced Bioluminescence System for In Vivo Imaging with Brighter and Red-Shifted Light Emission

In vivo bioluminescence imaging (BLI), which is based on luminescence emitted by the luciferase-luciferin reaction, has enabled continuous monitoring of various biochemical processes in living animals. Bright luminescence with a high signal-to-background ratio, ideally red or near-infrared light as the emission maximum, is necessary for in vivo animal experiments. Various attempts have been undertaken to achieve this goal, including genetic engineering of luciferase, chemical modulation of luciferin, and utilization of bioluminescence resonance energy transfer (BRET). In this review, we overview a recent advance in the development of a bioluminescence system for in vivo BLI. We also specifically examine the improvement in bioluminescence intensity by mutagenic or chemical modulation on several beetle and marine luciferase bioluminescence systems. We further describe that intramolecular BRET enhances luminescence emission, with recent attempts for the development of red-shifted bioluminescence system, showing great potency in in vivo BLI. Perspectives for future improvement of bioluminescence systems are discussed.

Bioluminescence-Based Energy Transfer Using Semiconductor Quantum Dots as Acceptors

Bioluminescence resonance energy transfer (BRET) is the non-radiative transfer of energy from a bioluminescent protein donor to a fluorophore acceptor. It shares all the formalism of Förster resonance energy transfer (FRET) but differs in one key aspect: that the excited donor here is produced by biochemical means and not by an external illumination. Often the choice of BRET source is the bioluminescent protein Renilla luciferase, which catalyzes the oxidation of a substrate, typically coelenterazine, producing an oxidized product in its electronic excited state that, in turn, couples with a proximal fluorophore resulting in a fluorescence emission from the acceptor. The acceptors pertinent to this discussion are semiconductor quantum dots (QDs), which offer some unrivalled photophysical properties. Amongst other advantages, the QD's large Stokes shift is particularly advantageous as it allows easy and accurate deconstruction of acceptor signal, which is difficult to attain using organic dyes or fluorescent proteins. QD-BRET systems are gaining popularity in non-invasive bioimaging and as probes for biosensing as they don't require external optical illumination, which dramatically improves the signal-to-noise ratio by avoiding background auto-fluorescence. Despite the additional advantages such systems offer, there are challenges lying ahead that need to be addressed before they are utilized for translational types of research.

Creation of different bioluminescence resonance energy transfer based biosensors with high affinity to VEGF

In age-related macular degeneration (AMD) or diabetic retinopathy (DR), hypoxia and inflammatory processes lead to an upregulation of the vascular endothelial growth factor (VEGF) expression and thereby to pathological neovascularisation with incorrectly formed vessels prone to damage, thus increasing the vascular permeability and the risk of bleeding and oedema in the retina. State of the art treatment is the repeated intraocular injection of anti-VEGF molecules. For developing improved individualized treatment approaches, a minimally invasive, repeatable method for in vivo quantification of VEGF in the eye is necessary. Therefore, we designed single molecule eBRET2 VEGF biosensors by directly fusing a Renilla luciferase mutant (Rluc8) N-terminal and a green fluorescent protein (GFP2) C-terminal to a VEGF binding domain. In total, 10 different VEGF biosensors (Re01- Re10) were generated based on either single domains or full length of VEGF receptor 1 or 2 extracellular regions as VEGF binding domains. Full length expression of the biosensors in HEK293-T cells was verified via Western Blot employing an anti-Rluc8-IgG. Expression of alternative splice variants was eliminated through the deletion of the donor splice site by introduction of a silent point mutation. In all ten biosensors the energy transfer from the Rluc8 to the GFP2 occurs and generates a measurable eBRET2 ratio. Four biosensors show a relevant change of the BRET ratio (ΔBR) after VEGF binding. Furthermore, each biosensor shows a unique detection range for VEGF quantification and especially Re06 and Re07 have a high sensitivity in the range of in vivo VEGF concentrations in the eye, previously measured by invasive methods. In conclusion, we generated several eBRET2 biosensors that are suitable for VEGF quantification in vitro and could identify two eBRET2 biosensors, which may be suitable for non-invasive in vivo VEGF quantification with an implantable device.

Bioluminescence Resonance Energy Transfer (BRET) Coupled Near-Infrared Imaging of Apoptotic Cells

Detection of apoptotic cells is crucial for understanding the mechanism of diseases and for therapy development. So far, visible-emitting fluorescent probes such as FITC-labeled Annexin V has been widely used for the detection of apoptotic cells. However, such probes cannot be applied to noninvasive imaging in the near-infrared (NIR) region. Compared with visible light, NIR light is highly permeable in turbid biological samples and tissues. In addition, NIR optical imaging has several advantages such as lower autofluorescence and scattering from biological samples, leading to clearer images with high signal to background ratios. Here, we describe the synthesis and application of bioluminescence resonance energy transfer (BRET)-coupled quantum dots (QDs) for the NIR optical imaging of apoptotic cells.

Self-illumination of Carbon Dots by Bioluminescence Resonance Energy Transfer

Carbon-dots (CDs), the emerging fluorescent nanoparticles, show special multicolor properties, chemical stability, and biocompatibility, and are considered as the new and advanced imaging probe in replacement of molecular fluorophores and semiconductor quantum dots. However, the requirement of external high power light source limits the application of fluorescent nanomaterials in bio-imaging. The present study aims to take advantage of bioluminescence resonance energy transfer mechanism (BRET) in creating self-illuminating C-dots. Renilla luciferase (Rluc) is chosen as the BRET donor molecule. Conjugation of Renilla luciferase and C-dots is necessary to keep their distance close for energy transfer. The optimal condition for achieving BRET is investigated by studying the effects of different factors on the performance of BRET, including the type of conjugation, concentration of carbon dots, and conjugation time. The linear relationship of BRET efficiency as a function of the amount of C-dots in the range of 0.20–0.80 mg/mL is observed. The self-illuminating carbon dots could be applied in bioimaging avoiding the tissue damage from the external high power light source.

In Vivo Biosensing Using Resonance Energy Transfer

Solution-phase and intracellular biosensing has substantially enhanced our understanding of molecular processes foundational to biology and pathology. Optical methods are favored because of the low cost of probes and instrumentation. While chromatographic methods are helpful, fluorescent biosensing further increases sensitivity and can be more effective in complex media. Resonance energy transfer (RET)-based sensors have been developed to use fluorescence, bioluminescence, or chemiluminescence (FRET, BRET, or CRET, respectively) as an energy donor, yielding changes in emission spectra, lifetime, or intensity in response to a molecular or environmental change. These methods hold great promise for expanding our understanding of molecular processes not just in solution and in vitro studies, but also in vivo, generating information about complex activities in a natural, organismal setting. In this review, we focus on dyes, fluorescent proteins, and nanoparticles used as energy transfer-based optical transducers in vivo in mice; there are examples of optical sensing using FRET, BRET, and in this mammalian model system. After a description of the energy transfer mechanisms and their contribution to in vivo imaging, we give a short perspective of RET-based in vivo sensors and the importance of imaging in the infrared for reduced tissue autofluorescence and improved sensitivity.

Au@SiO2@CuInS2-ZnS/Anti-AFP fluorescent probe improves HCC cell labeling

BACKGROUND

Clear tumor imaging is essential to the resection of hepatocellular carcinoma (HCC). This study aimed to create a novel biological probe to improve the HCC imaging.

METHODS

Au nano-flower particles and CuInS₂-ZnS core-shell quantum dots were synthesized by hydrothermal method. Au was coated with porous SiO₂ and combined with anti-AFP antibody. HCC cell line HepG2 was used to evaluate the targeting efficacy of the probe, while flow cytometry and MTT assay were used to detect the cytotoxicity and bio-compatibility of the probe. Probes were subcutaneously injected to nude mice to explore light intensity and tissue penetration.

RESULTS

The fluorescence stability of the probe was maintained 100% for 24 h, and the brightness value was 4 times stronger than that of the corresponding CuInS₂-ZnS quantum dot. In the targeting experiment, the labeled HepG2 emitted yellow fluorescence. In the cytotoxicity experiments, MTT and flow cytometry results showed that the bio-compatibility of the probe was fine, the inhibition rate of HepG2 cell with 60% Cu-QDs/Anti-AFP probe and Au-QDs/Anti-AFP probe solution for 48 h were significantly different (86.3%±7.0% vs. 4.9%±1.3%, t = 19.745, P<0.05), and the apoptosis rates were 83.3%±5.1% vs. 4.4%±0.8% (P<0.001). In the animal experiment, the luminescence of the novel probe can penetrate the abdominal tissues of a mouse, stronger than that of CuInS₂-ZnS quantum dot.

CONCLUSIONS

The Au@SiO₂@CuInS₂-ZnS/Anti-AFP probe can targetedly recognize and label HepG2 cells with good bio-compatibility and no toxicity, and the strong tissue penetrability of luminescence may be helpful to surgeons.

Chemiluminescence and Bioluminescence Imaging for Biosensing and Therapy: In Vitro and In Vivo Perspectives

Chemiluminescence (CL) and bioluminescence (BL) imaging technologies, which require no external light source so as to avoid the photobleaching, background interference and autoluminescence, have become powerful tools in biochemical analysis and biomedical science with the development of advanced imaging equipment. CL imaging technology has been widely applied to high-throughput detection of a variety of analytes because of its high sensitivity, high efficiency and high signal-to-noise ratio (SNR). Using luciferase and fluorescent proteins as reporters, various BL imaging systems have been developed innovatively for real-time monitoring of diverse molecules in vivo based on the reaction between luciferin and the substrate. Meanwhile, the kinetics of protein interactions even in deep tissues has been studied by BL imaging. In this review, we summarize in vitro and in vivo applications of CL and BL imaging for biosensing and therapy. We first focus on in vitro CL imaging from the view of improving the sensitivity. Then, in vivo CL applications in cells and tissues based on different CL systems are demonstrated. Subsequently, the recent in vitro and in vivo applications of BL imaging are summarized. Finally, we provide the insight into the development trends and future perspectives of CL and BL imaging technologies.

Imaging of Red-Shifted Light From Bioluminescent Tumors Using Fluorescence by Unbound Excitation From Luminescence

Early detection of tumors is today a major challenge and requires sensitive imaging methodologies coupled with new efficient probes. In vivo optical bioluminescence imaging has been widely used in the field of preclinical oncology to visualize tumors and several cancer cell lines have been genetically modified to provide bioluminescence signals. However, the light emitted by the majority of commonly used luciferases is usually in the blue part of the visible spectrum, where tissue absorption is still very high, making deep tissue imaging non-optimal, and calling for optimized optical imaging methodologies. We have previously shown that red-shifting of bioluminescence signal by Fluorescence Unbound Excitation from Luminescence (FUEL) is a mean to increase bioluminescence signal sensitivity detection in vivo. Here, we applied FUEL to tumor detection in two different subcutaneous tumor models: the auto-luminescent human embryonic kidney (HEK293) cell line and the murine B16-F10 melanoma cell line previously transfected with a plasmid encoding the Luc2 firefly luciferase. Tumor size and bioluminescence were measured over time and tumor vascularization characterized. We then locally injected near infrared emitting Quantum Dots (NIR QDs) in the tumor site and observed a red-shifting of bioluminescence signal by (FUEL) indicating that FUEL could be used to allow deeper tumor detection in mice.

Integration of Nanomaterials and Bioluminescence Resonance Energy Transfer Techniques for Sensing Biomolecules

Bioluminescence resonance energy transfer (BRET) techniques offer a high degree of sensitivity, reliability and ease of use for their application to sensing biomolecules. BRET is a distance dependent, non-radiative energy transfer, which uses a bioluminescent protein to excite an acceptor through the resonance energy transfer. A BRET sensor can quickly detect the change of a target biomolecule quantitatively without an external electromagnetic field, e.g., UV light, which normally can damage tissue. Having been developed quite recently, this technique has evolved rapidly. Here, different bioluminescent proteins have been reviewed. In addition to a multitude of bioluminescent proteins, this manuscript focuses on the recent development of BRET sensors by utilizing quantum dots. The special size-dependent properties of quantum dots have made the BRET sensing technique attractive for the real-time monitoring of the changes of target molecules and bioimaging in vivo. This review offers a look into the basis of the technique, donor/acceptor pairs, experimental applications and prospects.

Bioluminescence Resonance Energy Transfer as a Method to Study Protein-Protein Interactions: Application to G Protein Coupled Receptor Biology

The bioluminescence resonance energy transfer (BRET) approach involves resonance energy transfer between a light-emitting enzyme and fluorescent acceptors. The major advantage of this technique over biochemical methods is that protein-protein interactions (PPI) can be monitored without disrupting the natural environment, frequently altered by detergents and membrane preparations. Thus, it is considered as one of the most versatile technique for studying molecular interactions in living cells at "physiological" expression levels. BRET analysis has been applied to study many transmembrane receptor classes including G-protein coupled receptors (GPCR). It is well established that these receptors may function as dimeric/oligomeric forms and interact with multiple effectors to transduce the signal. Therefore, they are considered as attractive targets to identify PPI modulators. In this review, we present an overview of the different BRET systems developed up to now and their relevance to identify inhibitors/modulators of protein⁻protein interaction. Then, we introduce the different classes of agents that have been recently developed to target PPI, and provide some examples illustrating the use of BRET-based assays to identify and characterize innovative PPI modulators in the field of GPCRs biology. Finally, we discuss the main advantages and the limits of BRET approach to characterize PPI modulators.

BRET based dual-colour (visible/near-infrared) molecular imaging using a quantum dot/EGFP–luciferase conjugate

Owing to its high sensitivity, bioluminescence imaging is an important tool for biosensing and bioimaging in life sciences. Compared to fluorescence imaging, bioluminescence imaging has a superior advantage that the background signals resulting from autofluorescence are almost zero. In addition, bioluminescence imaging can permit long-term observation of living cells because external excitation is not needed, leading to no photobleaching and photocytotoxicity. Although bioluminescence imaging has such superior properties over fluorescence imaging, observation wavelengths in bioluminescence imaging are mostly limited to the visible region. Here we present bioluminescence resonance energy transfer (BRET) based dual-colour (visible/near-infrared) molecular imaging using a quantum dot (QD) and luciferase protein conjugate. This bioluminescent probe is designed to emit green and near-infrared luminescence from enhanced green fluorescent protein (EGFP) and CdSeTe/CdS (core/shell) QDs, where EGFP–Renilla luciferase (RLuc) fused proteins are conjugated to the QDs. Since the EGFP–RLuc fused protein contains an immunoglobulin binding domain (GB1) of protein G, it is possible to prepare a variety of molecular imaging probes functionalized with antibodies (IgG). We show that the BRET-based QD probe can be used for highly sensitive dual-colour (visible/near-infrared) bioluminescence molecular imaging of membrane receptors in cancer cells.

A bioluminescent dual-colour molecular-imaging probe was prepared to emit green and near-infrared luminescence from a conjugate between enhanced green fluorescent protein (EGFP), Renilla luciferase (RLuc) and CdSeTe/CdS quantum dot (QD).

Quantum Dot Based Nano-Biosensors for Detection of Circulating Cell Free miRNAs in Lung Carcinogenesis: From Biology to Clinical Translation

Lung cancer is the most frequently occurring malignancy and the leading cause of cancer-related death for men in our country. The only recommended screening method is clinic based low-dose computed tomography (also called a low-dose CT scan, or LDCT). However, the effect of LDCT on overall mortality observed in lung cancer patients is not statistically significant. Over-diagnosis, excessive cost, risks associated with radiation exposure, false positive results and delay in the commencement of the treatment procedure questions the use of LDCT as a reliable technique for population-based screening. Therefore, identification of minimal-invasive biomarkers able to detect malignancies at an early stage might be useful to reduce the disease burden. Circulating nucleic acids are emerging as important source of information for several chronic pathologies including lung cancer. Of these, circulating cell free miRNAs are reported to be closely associated with the clinical outcome of lung cancer patients. Smaller size, sequence homology between species, low concentration and stability are some of the major challenges involved in characterization and specific detection of miRNAs. To circumvent these problems, synthesis of a quantum dot based nano-biosensor might assist in sensitive, specific and cost-effective detection of differentially regulated miRNAs. The wide excitation and narrow emission spectra of these nanoparticles result in excellent fluorescent quantum yields with a broader color spectrum which make them ideal bio-entities for fluorescence resonance energy transfer (FRET) based detection for sequential or simultaneous study of multiple targets. In addition, photo-resistance and higher stability of these nanoparticles allows extensive exposure and offer state-of-the art sensitivity for miRNA targeting. A major obstacle for integrating QDs into clinical application is the QD-associated toxicity. However, the use of non-toxic shells along with surface modification not only overcomes the toxicity issues, but also increases the ability of QDs to quickly detect circulating cell free miRNAs in a non-invasive mode. The present review illustrates the importance of circulating miRNAs in lung cancer diagnosis and highlights the translational prospects of developing QD-based nano-biosensor for rapid early disease detection.

Detection of lymph node metastasis with near-infrared upconversion luminescent nanoprobes

The detection of lymph node metastasis is of great importance for therapy planning and prognosis of cancers, but remains challenging in the clinic. In the current study, we report a tumor-specific imaging probe constructed with NaGdF4:Yb,Tm,Ca@NaLuF4 core@shell upconversion nanoparticles showing distinctive near infrared emission. The following studies revealed that the characteristic Tm dopant emission at 804 nm showed a penetration depth up to 7.7 mm through multi-layered mice skin tissues, substantially greater than emissions at 655 nm and 541 nm typically from the widely used Er dopant, which is apparently favorable for sensitive tumor diagnosis. The cell binding assay further revealed that the anti-HER2 antibodies covalently attached on the particle surface endowed the nanoprobe with excellent binding specificity in targeting HER2-positive cancer cells in vitro, which further enabled the detection of lymph node metastasis of breast cancer in vivo in mice. In addition, the pharmacokinetics of the resulting nanoprobes were intensively studied through both upconversion luminescence imaging and SPECT imaging for comparing with that of the mother particles. The results obtained through both approaches were well consistent and revealed that the surface conjugation of antibodies largely altered the pharmacokinetic behaviors and substantially prolonged the blood half-life of the underlying nanoparticles, which was never reported before.

A bioluminescent system of fungi: prospects for application in medical research

Bioluminescence is chemical oxidation of a small luciferin molecule by air catalyzed by luciferase and accompanied by the emission of photons in the visible spectrum. This reaction is used in bioluminescent bioimaging, the method for the visualization of organism’s interior. Bioimaging is a popular tool used in medical research. However, it has an unfortunate drawback: it requires introduction of external luciferin to the system before every experiment. In this work we discuss a possibility of developing an autonomous luminescent system in eukaryotes based on the bioluminescent system of higher fungi.

1001 lights: luciferins, luciferases, their mechanisms of action and applications in chemical analysis, biology and medicine

Bioluminescence (BL) is a spectacular phenomenon involving light emission by live organisms. It is caused by the oxidation of a small organic molecule, luciferin, with molecular oxygen, which is catalysed by the enzyme luciferase. In nature, there are approximately 30 different BL systems, of which only 9 have been studied to various degrees in terms of their reaction mechanisms. A vast range of in vitro and in vivo analytical techniques have been developed based on BL, including tests for different analytes, immunoassays, gene expression assays, drug screening, bioimaging of live organisms, cancer studies, the investigation of infectious diseases and environmental monitoring. This review aims to cover the major existing applications for bioluminescence in the context of the diversity of luciferases and their substrates, luciferins. Particularly, the properties and applications of d-luciferin, coelenterazine, bacterial, Cypridina and dinoflagellate luciferins and their analogues along with their corresponding luciferases are described. Finally, four other rarely studied bioluminescent systems (those of limpet Latia, earthworms Diplocardia and Fridericia and higher fungi), which are promising for future use, are also discussed.

Bioluminescence Resonance Energy Transfer (BRET)-coupled Annexin V-functionalized Quantum Dots for Near-Infrared Optical Detection of Apoptotic Cells

Deregulation in apoptosis induces numerous diseases such as cancer, cardiovascular, and neurodegenerative diseases. Detection of apoptotic cells is crucial for understanding the mechanism of these diseases and for therapy development. Although optical imaging using visible-emitting fluorescent probes, such as FITC-labeled annexin V, is widely used for the detection of apoptotic cells, there are very limited probes that can be used in the near-infrared region (NIR) over 700 nm. Compared with visible light, NIR light is highly permeable in turbid biological samples and tissues. In addition, optical imaging in the NIR region shows low autofluorescence from biological samples, leading to clearer images with high signal to background ratios. Here, we report the synthesis of bioluminescence resonance energy transfer (BRET)-coupled annexin V-functionalized quantum dots (QDs) and their application to NIR optical detection of apoptotic cells.

A replication-competent foot-and-mouth disease virus expressing a luciferase reporter

•

We have generated a replication-competent foot-and-mouth disease virus expressing Nanoluciferase, designated as Nano-FMDV.

•

Nano-FMDV is genetically stable.

•

The replication of Nano-FMDV can be monitored by bioluminescent methods.

•

This reporter virus has potential applications in real-time monitoring of FMDV infection in vitro and in vivo, and in screening of antivirals and antibodies.

Bioluminescence is a powerful tool in the study of viral infection both in vivo and in vitro. Foot-and-mouth disease virus (FMDV) has a small RNA genome with a limited tolerance to foreign RNA entities. There has been no success in making a reporter FMDV expressing a luciferase in infected cell culture supernatants. We report here for the first time a replication-competent FMDV encoding Nanoluciferase, named as Nano-FMDV. Nano-FMDV is genetically stable during serial passages in cells and exhibits growth kinetics and plaque morphology similar to its parental virus. There are applications for the use of Nano-FMDV such as real-time monitoring of FMDV replication in vitro and in vivo.

DNA nanomaterials for preclinical imaging and drug delivery

Besides being the carrier of genetic information, DNA is also an excellent biological organizer to establish well-designed nanostructures in the fields of material engineering, nanotechnology, and biomedicine. DNA-based materials represent a diverse nanoscale system primarily due to their predictable base pairing and highly regulated conformations, which greatly facilitate the construction of DNA nanostructures with distinct shapes and sizes. Integrating the emerging advancements in bioconjugation techniques, DNA nanostructures can be readily functionalized with high precision for many purposes ranging from biosensors to imaging to drug delivery. Recent progress in the field of DNA nanotechnology has exhibited collective efforts to employ DNA nanostructures as smart imaging agents or delivery platforms within living organisms. Despite significant improvements in the development of DNA nanostructures, there is limited knowledge regarding the in vivo biological fate of these intriguing nanomaterials. In this review, we summarize the current strategies for designing and purifying highly-versatile DNA nanostructures for biological applications, including molecular imaging and drug delivery. Since DNA nanostructures may elicit an immune response in vivo, we also present a short discussion of their potential toxicities in biomedical applications. Lastly, we discuss future perspectives and potential challenges that may limit the effective preclinical and clinical employment of DNA nanostructures. Due to their unique properties, we predict that DNA nanomaterials will make excellent agents for effective diagnostic imaging and drug delivery, improving patient outcome in cancer and other related diseases in the near future.