Temperature-Controllable Liquid Crystalline Medium for Stereochemical Elucidation of Organic Compounds via Residual Chemical Shift Anisotropies

The configuration elucidation of organic molecules continues to pose significant challenges in studies involving stereochemistry. Nuclear magnetic resonance (NMR) techniques are powerful for obtaining such structural information. Anisotropic NMR techniques, such as measurement of residual dipolar couplings (RDCs) and residual chemical shift anisotropies (RCSAs), complementing isotropic NMR parameters, provide relative configuration information. RCSAs provide valuable structural information, especially for nonprotonated carbons, yet have been severely underutilized due to the lack of an easily operational alignment medium capable of rapid transition from anisotropic to isotropic environments, especially in aqueous conditions. In this study, an oligopeptide-based alignment media (FK)4 is presented for RCSA measurements. Temperature variation manipulates the assembly of (FK)4, yielding tunable anisotropic and isotropic phases without the requirement of any special devices or time-consuming correction procedures during data analysis. Decent observed ΔΔRCSA values from sp3 carbons benefit the utilization of RCSA measurements in the structural elucidation of organic molecules highly composed with sp3 carbons. Moreover, the (FK)4 alignment medium is applicable for both RDC and RCSA measurements in one sample, further advancing the configuration analysis of molecules of interest.

Bioinspired Microadhesives with Greatly Enhanced Reversible Adhesion Fabricated by Synthesized Silicone Elastomer with Increasing Phenyl Contents

We present a facile chemical method for fabricating bioinspired microadhesives with significant improved reversible adhesion strength. Four kinds of polysiloxane with gradient varying phenyl contents were synthesized and used to fabricate microadhesives. The chemical structures and mechanical properties, as well as surface properties of the four microadhesives, were confirmed and characterized by ATR-FTIR, DSC, XPS, low-field NMR, tensile tests, and SEM, respectively. The macroadhesion test results revealed that phenyl contents showed remarkable and positive impacts on the macroadhesion performance of microadhesives. The pull-off adhesion strength of microadhesives with 90% phenyl content (0.851 N/cm2) was nearly 300% higher than that of pure PDMS (0.309 N/cm2). The macroadhesion mechanism analysis demonstrates that a larger bulk energy dissipation caused by massive π-π interaction, as well as the hydrophobic interaction and van der Waals forces at the interface synergistically resulted in a significant enhancement of the adhesion performance. Our results demonstrate the remarkable impact of chemical structures on the adhesion of microadhesives, and it is conducive to the further improvement of adhesion properties of bioinspired microadhesives.

A humidity-resistant bio-inspired microfibrillar adhesive fabricated using a phenyl-rich polysiloxane elastomer for reliable skin patches

Steady adhesion under varying humidity conditions is fundamentally challenging due to the barrier of interfacial water molecules. Here, we demonstrate a humidity-resistant gecko-inspired microfibrillar adhesive fabricated by using a specific phenyl-rich polysiloxane. In contrast with the great decline of macroadhesion with increasing humidity for the typical polydimethylsiloxane (PDMS) microfibrillar adhesives, strong macroadhesion of a microfibrillar adhesive fabricated using synthetic phenyl-rich polysiloxane maintains adhesion well across a wide relative humidity range (1% to 95%). Moreover, the pull-off strength is increased by 500% compared to that of phenyl-absent PDMS microfibrillar adhesives at extremely high humidity. Mechanism analysis demonstrates that the synergistic interplay of strong interfacial hydrophobicity leading to dry contact and bulk energy dissipation through massive aromatic π-π interactions contributes greatly to the reliable and strong humidity macroadhesion. The present results provide a better understanding of humidity macroadhesion as well as application potential for microfibrillar adhesives, which are proven to be reliable skin adhesive patches for long-term health-care that have to be exposed to varying humidity conditions of the skin surface.

From passive to emerging smart silicones

Amassing remarkable properties, silicones are practically indispensable in our everyday life. In most classic applications, they play a passive role in that they cover, seal, insulate, lubricate, water-proof, weather-proof etc. However, silicone science and engineering are highly innovative, seeking to develop new compounds and materials that meet market demands. Thus, the unusual properties of silicones, coupled with chemical group functionalization, has allowed silicones to gradually evolve from passive materials to active ones, meeting the concept of “smart materials”, which are able to respond to external stimuli. In such cases, the intrinsic properties of polysiloxanes are augmented by various chemical modifications aiming to attach reactive or functional groups, and/or by engineering through proper cross-linking pattern or loading with suitable fillers (ceramic, magnetic, highly dielectric or electrically conductive materials, biologically active, etc.), to add new capabilities and develop high value materials. The literature and own data reflecting the state-of-the art in the field of smart silicones, such as thermoplasticity, self-healing ability, surface activity, electromechanical activity and magnetostriction, thermo-, photo-, and piezoresponsivity are reviewed.

Polymer Encapsulation Strategy toward 3D Printable, Sustainable, and Reliable Form-Stable Phase Change Materials for Advanced Thermal Energy Storage

Form-stable phase change materials (PCMs) have garnered tremendous attention in thermal energy storage (TES) owing to their remarkable latent heat. However, the integration of intelligent manufacturing, recycling, and optimized multifunction is considered not feasible for form-stable PCMs due to the restriction of encapsulation technology. Here, an excellent polymer encapsulation strategy is proposed to prepare 3D printable, sustainable, and reliable form-stable PCMs (Si_PCM-x), which are universal for petroleum-based and biobased long alkyl compounds. Si_PCM-x have top-class latent heat, and the phase-change temperatures are tunable from body temperature to high temperature. The in situ formative bottlebrush phase-change polysiloxane networks are used as supporting materials, and the encapsulation mechanism is clarified. Si_rbw-250 can be degraded and re-encapsulated to achieve recycling. Besides, Si_rbw-250 is fabricated as the customer-designed objects with shape-changing behavior via 3D printing. By introducing the metal foams and nano-coatings, the resulting phase-change composites simultaneously exhibit excellent superhydrophobicity, mechanical properties, thermal conductivity, electromagnetic interference shielding behavior, and solar-, electric-, and magnetic-to-thermal energy conversion ability. Besides, S-Ni-Si_PCM-250 can be applied in the wearable functional devices and movable solar-thermal charging. This strategy will lead to huge renovation in the TES field and provide an efficient guideline for designing advanced form-stable PCMs.

Elucidating natural product structures using a robust measurement of carbon residual chemical shift anisotropy combined with DFT

Determination of configurations and conformations is an important step in the structural characterization of small molecules. Apart from utilizing isotropic J-couplings and nuclear overhauser effect (NOEs) measured in isotropic solution, anisotropic Nuclear Magnetic resonance (NMR) data such as residual dipolar couplings and residual chemical shift anisotropies (RCSAs) were also used to elucidate complex small molecule structures. Measuring RCSA has always been historically difficult due to the isotropic shift effect accompanied by molecular alignment and therefore only occasionally applied in a few examples. Here, we present a robust measurement of carbon RCSAs using a smaller gel-stretching device to determine the structures of a few small molecules. A systematic study on how different density functional theory computed anisotropies of the chemical shift anisotropy tensors impact RCSA data interpretation has also been discussed. We also discuss the effect of utilizing various carbons as reference nuclei for RCSA data extraction as well as the orientation behavior of estrone in orthogonal alignment media.

Relative configuration of micrograms of natural compounds using proton residual chemical shift anisotropy

3D molecular structure determination is a challenge for organic compounds or natural products available in minute amounts. Proton/proton and proton/carbon correlations yield the constitution. J couplings and NOEs oftentimes supported by one-bond ¹H,¹³C residual dipolar couplings (RDCs) or by ¹³C residual chemical shift anisotropies (RCSAs) provide the relative configuration. However, these RDCs or carbon RCSAs rely on 1% natural abundance of ¹³C preventing their use for compounds available only in quantities of a few 10’s of µgs. By contrast, ¹H RCSAs provide similar information on spatial orientation of structural moieties within a molecule, while using the abundant ¹H spin. Herein, ¹H RCSAs are accurately measured using constrained aligning gels or liquid crystals and applied to the 3D structural determination of molecules with varying complexities. Even more, deuterated alignment media allow the elucidation of the relative configuration of around 35 µg of a briarane compound isolated from Briareum asbestinum.

Determination of 3D molecular structures remains challenging for natural products or organic compounds available in minute amounts. Here, the authors determine the structure of complex molecules, including few micrograms of briarane B-3 isolated from Briareum asbestinums, through measurement of ¹H residual chemical shift anisotropy.

Catalytic Control of Plastic Flow in Siloxane-Based Liquid Crystalline Elastomer Networks

Liquid crystalline elastomer networks cross-linked by dynamic covalent bonds (xLCE) have the ability to be (re)processed during the plastic flow. However, the current bond-exchange strategies that are used to induce plastic flow in xLCE lack the efficient method to control the elastic-plastic transition. Here we describe a straightforward method to manipulate the transition to plastic flow via the choice of catalyst in xLCE cross-linked by siloxane. The nature and the amount of catalyst have a profound effect on the elastic-plastic transition temperature, and the stress relaxation behavior of the network. The temperature of fast plastic flow and the associated bond-exchange activation energy varied from 120 °C and 83 kJ/mol in the "fastest" exchange promoted by triazobicyclodecene (TBD) to 240 °C and 164 kJ/mol in the "slowest" exchange with triphenylphosphine (PPH), with a range of catalysts in between. We have identified the optimum conditions for programming an aligned monodomain xLCE, high programming temperature (230 °C) and low nematic to isotropic transition (60 °C), to achieve thermally and mechanically stable actuators.

Residual Dipolar Couplings in Structure Determination of Natural Products

The determination of natural products stereochemistry remains a formidable task. Residual dipolar couplings (RDCs) induced by anisotropic media are a powerful tool for determination of the stereochemistry of organic molecule in solution. This review will provide a short introduction on RDCs-based methodology for the structural elucidation of natural products. Special attention is given to the current availability of alignment media in organic solvents. The applications of RDCs for structural analysis of some examples of natural products were discussed and summarized. This review provides a short introduction on RDCs-based methodology for the structural elucidation of natural products. Special attention is given to the current availability of alignment media in organic solvents. The applications of RDCs for structural analysis of some examples of natural products were discussed and summarized.

A Self-Assembled Oligopeptide as a Versatile NMR Alignment Medium for the Measurement of Residual Dipolar Couplings in Methanol

Residual dipolar coupling (RDC) is a powerful structural parameter for the determination of the constitution, conformation, and configuration of organic molecules. Herein, we report the first liquid crystal-based orienting medium that is compatible with MeOH, thus enabling RDC acquisitions of a wide range of intermediate to polar organic molecules. The liquid crystals were produced from self-assembled oligopeptide nanotubes (AAKLVFF), which are stable at very low concentrations. The presented alignment medium is highly homogeneous, and the size of RDCs can be scaled with the concentration of the peptide. To assess the accuracy of the RDC measurement by employing this new medium, seven bioactive natural products from different classes were chosen and analyzed. The straightforward preparation of the anisotropic alignment sample will offer a versatile and robust protocol for the routine RDC measurement of natural products.