Lowering water oxidation overpotentials using the ionisable imidazole of copper(2-(2'-pyridyl)imidazole)

Experimental and theoretical studies of pH-responsive iridium(III) complexes of azole and N-heterocyclic carbene ligands

A series of nine luminescent iridium(III) complexes with pH-responsive imidazole and benzimidazole ligands have been prepared and characterized. The first series of complexes were of the form [Ir(ppy)2(N^N)]+ or [Ir(ppy)2(C^N)]+ (where ppy is 2-phenylpyridine and N^N is 2-(2-pyridyl)imidazole or 2-(2-pyridyl)benzimidazole and C^N represents a pyridyl-triazolylidene-based N-heterocyclic carbene ligand). For these complexes, the benzimidazole group was either unsubstituted or substituted with electron-withdrawing (Cl) or electron-donating (Me) groups. The second series of complexes were of the form [Ir(phbim)2(N^N)]+ or [Ir(phbim)2(C^N)]+ (where phbim is 2-phenylbenzimidazole and N^N is either 2,2'-bipyridine or 1,10-phenanthroline and C^N is either a pyridyl-imidazolylidene or pyridyl-triazolylidene N-heterocyclic carbene ligand). UV-visible and photoluminescence pH titration studies showed that changing the protonation state of these complexes results in significant changes in the photoluminescence emission properties. The pKa values of prepared complexes were estimated from the spectroscopic pH titration data and these values show that the nature of the pH-sensitive ligands (either main or ancillary ligands) resulted in a significant capacity to modulate the pKa values for these compounds with values ranging from 5.19-11.22. Theoretical investigations into the nature of the electronic transitions for the different protonation states of compounds were performed and the results were consistent with the experimental results.

Electrocatalytic Water Oxidation by Mononuclear Copper Complexes of Bis-amide Ligands with N4 Donor: Experimental and Theoretical Investigation

The present work describes electrocatalytic water oxidation of three monomeric copper complexes [CuII(L1)] (1), [CuII(L2)(H2O)] (2), and [CuII(L3)] (3) with bis-amide tetradentate ligands: L1 = N,N'-(1,2-phenylene)dipicolinamide, L2 = N,N'-(4,5-dimethyl-1,2-phenylene)bis(pyrazine-2-carboxamide), L3 = N,N'-(1,2-phenylene)bis(pyrazine-2-carboxamide), for the production of molecular oxygen by the oxidation of water at pH 13.0. Ligands and all complexes have been synthesized and characterized by single crystal XRD, analytical, and spectroscopic techniques. X-ray crystallographic data show that the ligand coordinates to copper in a dianionic fashion through deprotonation of two -NH protons. Cyclic voltammetry study shows a reversible copper-centered redox couple with one ligand-based oxidation event. The electrocatalytic water oxidation occurs at an onset potential of 1.16 (overpotential, η ≈ 697 mV), 1.2 (η ≈ 737 mV), and 1.23 V (η ≈ 767 mV) for 1, 2, and 3 respectively. A systematic variation of the ligand scaffold has been found to display a profound effect on the rate of electrocatalytic oxygen evolution. The results of the theoretical (density functional theory) studies show the stepwise ligand-centered oxidation process and the formation of the O-O bond during water oxidation passes through the water nucleophilic attack for all the copper complexes. At pH = 13, the turnover frequencies have been experimentally obtained as 88, 1462, and 10 s-1 (peak current measurements) for complexes 1, 2, and 3, respectively. Production of oxygen gas during controlled potential electrolysis was detected by gas chromatography.

Impact of the hybridization form of the coordinated nitrogen atom on the electrocatalytic water oxidation performance of copper complexes with pentadentate amine-pyridine ligands

The field of molecular catalysts places a strong emphasis on the connection between the ligand structure and its catalytic performance. Herein, we changed the type of coordinated nitrogen atom in pentadentate amine-pyridine ligands to explore the impact of its hybridization form on the water oxidation performance of copper complexes. In the electrochemical tests, the copper complex bearing dipyridine-triamine displayed an apparently higher rate constant of 4.97 s-1, while the copper complex with tripyridine-diamine demonstrated overpotential reduction by 56 mV and better long-term electrolytic stability.

Strategic Synthesis of Heptacoordinated FeIII Bifunctional Complexes for Efficient Water Electrolysis

In this research, highly efficient heterogeneous bifunctional (BF) electrocatalysts (ECs) have been strategically designed by Fe coordination (CR ) complexes, [Fe2 L2 (H2 O)2 Cl2 ] (C1) and [Fe2 L2 (H2 O)2 (SO4 )].2(CH4 O) (C2) where the high seven CR number synergistically modifies the electronic environment of the Fe centre for facilitation of H2 O electrolysis. The electronic status of Fe and its adjacent atomic sites have been further modified by the replacement of -Cl- in C1 by -SO4 2- in C2. Interestingly, compared to C1, the O-S-O bridged C2 reveals superior BF activity with extremely low overpotential (η) at 10 mA cm-2 (140 mVOER , 62 mVHER ) and small Tafel slope (120.9 mV dec-1 OER , 45.8 mV dec-1 HER ). Additionally, C2 also facilitates a high-performance alkaline H2 O electrolyzer with cell voltage of 1.54 V at 10 mA cm-2 and exhibits remarkable long-term stability. Thus, exploration of the intrinsic properties of metal-organic framework (MOF)-based ECs opens up a new approach to the rational design of a wide range of molecular catalysts.

Dinuclear Cobalt Complexes for Homogeneous Water Oxidation: Tuning Rate and Overpotential through the Non-Innocent Ligand

In this study, dinuclear cobalt complexes (1 and 2) featuring bis(benzimidazole)pyrazolide-type ligands (H₂ L and Me₂ L) were prepared and evaluated as molecular electrocatalysts for water oxidation. Notably, 1 bearing a non-innocent ligand (H₂ L) displayed faster catalytic turnover than 2 under alkaline conditions, and the base dependence of water oxidation and kinetic isotope effect analysis indicated that the reaction mediated by 1 proceeded by a different mechanism relative to 2. Spectroelectrochemical, cold-spray ionization mass spectrometric and computational studies found that double deprotonation of 1 under alkaline conditions cathodically shifted the catalysis-initiating potential and further altered the turnover-limiting step from nucleophilic water attack on (H₂ L)Co^III ₂ (superoxo) to deprotonation of (L)Co^III ₂ (OH)₂ . The rate-overpotential analysis and catalytic Tafel plots showed that 1 exhibited a significantly higher rate than previously reported Ru-based dinuclear electrocatalysts at similar overpotentials. These observations suggest that using non-innocent ligands is a valuable strategy for designing effective metal-based molecular water oxidation catalysts.

Ligands modification strategies for mononuclear water splitting catalysts

Artificial photosynthesis (AP) has been proved to be a promising way of alleviating global climate change and energy crisis. Among various materials for AP, molecular complexes play an important role due to their favorable efficiency, stability, and activity. As a result of its importance, the topic has been extensively reviewed, however, most of them paid attention to the designs and preparations of complexes and their water splitting mechanisms. In fact, ligands design and preparation also play an important role in metal complexes’ properties and catalysis performance. In this review, we focus on the ligands that are suitable for designing mononuclear catalysts for water splitting, providing a coherent discussion at the strategic level because of the availability of various activity studies for the selected complexes. Two main designing strategies for ligands in molecular catalysts, substituents modification and backbone construction, are discussed in detail in terms of their potentials for water splitting catalysts.

Homogeneous Water Oxidation Catalyzed by First-Row Transition Metal Complexes: Unveiling the Relationship between Turnover Frequency and Reaction Overpotential

The utilization of earth-abundant low-toxicity metal ions in the construction of highly active and efficient molecular catalysts promoting the water oxidation reaction is important for developing a sustainable artificial energy cycle. However, the kinetic and thermodynamic properties of the currently available molecular water oxidation catalysts (MWOCs) have not been comprehensively investigated. This Review summarizes the current status of MWOCs based on first-row transition metals in terms of their turnover frequency (TOF, a kinetic property) and overpotential (η, a thermodynamic property) and uses the relationship between log(TOF) and η to assess catalytic performance. Furthermore, the effects of the same ligand classes on these MWOCs are discussed in terms of TOF and η, and vice versa. The collective analysis of these relationships provides a metric for the direct comparison of catalyst systems and identifying factors crucial for catalyst design.

Electrocatalytic Water Oxidation Activity of Molecular Copper Complexes: Effect of Redox-Active Ligands

Two molecular copper(II) complexes, (NMe₄)₂[Cu^II(L₁)] (1) and (NMe₄)₂[Cu^II(L₂)] (2), ligated by a N₂O₂ donor set of ligands [L₁ = N,N'-(1,2-phenylene)bis(2-hydroxy-2-methylpropanamide), and L₂ = N,N'-(4,5-dimethyl-1,2-phenylene)bis(2-hydroxy-2-methylpropanamide)] have been synthesized and thoroughly characterized. An electrochemical study of 1 in a carbonate buffer at pH 9.2 revealed a reversible copper-centered redox couple at 0.51 V, followed by two ligand-based oxidation events at 1.02 and 1.25 V, and catalytic water oxidation at an onset potential of 1.28 V (overpotential of 580 mV). The electron-rich nature of the ligand likely supports access to high-valent copper species on the CV time scale. The results of the theoretical electronic structure investigation were quite consistent with the observed stepwise ligand-centered oxidation process. A constant potential electrolysis experiment with 1 reveals a catalytic current density of >2.4 mA cm^-2 for 3 h. A one-electron-oxidized species of 1, (NMe₄)[Cu^III(L₁)] (3), was isolated and characterized. Complex 2, on the contrary, revealed copper and ligand oxidation peaks at 0.505, 0.90, and 1.06 V, followed by an onset water oxidation (WO) at 1.26 V (overpotential of 560 mV). The findings show that the ligand-based oxidation reactions strongly depend upon the ligand's electronic substitution; however, such effects on the copper-centered redox couple and catalytic WO are minimal. The energetically favorable mechanism has been established through the theoretical calculation of stepwise reaction energies, which nicely explains the experimentally observed electron transfer events. Furthermore, as revealed by the theoretical calculations, the O-O bond formation process occurs through a water nucleophilic attack mechanism with an easily accessible reaction barrier. This study demonstrates the importance of redox-active ligands in the development of molecular late-transition-metal electrocatalysts for WO reactions.

A low-cost commercial Cu(ii)–EDTA complex for electrocatalytic water oxidation in neutral aqueous solution

A low-cost commercial Cu complex [Cu(EDTA)(H2O)] is developed as a molecular catalyst for OER with high efficiency and durable stability.

A hemilabile 2-(2′-pyridyl)-imidazole based nickel(ii) complex: proton-coupled-electron-transfer, bactericidal and cytotoxicity studies

This study deals with the synthesis, structural characterization, proto-coupled-electron-transfer, bactericidal and cytotoxicity study of a hemilabile and water-soluble 2-(2′-pyridyl)-imidazole nickel(ii) complex.

Bio-Inspired Molecular Catalysts for Water Oxidation

The catalytic tetranuclear manganese-calcium-oxo cluster in the photosynthetic reaction center, photosystem II, provides an excellent blueprint for light-driven water oxidation in nature. The water oxidation reaction has attracted intense interest due to its potential as a renewable, clean, and environmentally benign source of energy production. Inspired by the oxygen-evolving complex of photosystem II, a large of number of highly innovative synthetic bio-inspired molecular catalysts are being developed that incorporate relatively cheap and abundant metals such as Mn, Fe, Co, Ni, and Cu, as well as Ru and Ir, in their design. In this review, we briefly discuss the historic milestones that have been achieved in the development of transition metal catalysts and focus on a detailed description of recent progress in the field.

Electrocatalytic water oxidation by a water-soluble copper complex with a pentadentate amine-pyridine ligand

A water-soluble copper complex with a diamine-tripyridine ligand was synthesized successfully and well characterized. It was found to be catalytically active for the water oxidation reaction under basic conditions. Based on the electrochemical test result, this copper complex displayed an apparent rate constant (k_cat) of 0.81 s^-1 for the oxygen evolution reaction in 0.1 M phosphate buffer solution at pH 11.0. More importantly, the copper complex remained stable over 3 h of a bulk electrolysis experiment at 1.60 V with a Faradaic efficiency of 90.7% for O₂ evolution, and the decrement of current density was only 1.9%. These results suggest that the pentadentate copper complex is an efficient and durable homogeneous Earth-abundant electrocatalyst for water oxidation.

Mechanistic Insight into the O2 Evolution Catalyzed by Copper Complexes with Tetra- and Pentadentate Ligands

The mononuclear complexes ([(bztpen)Cu] (BF₄)₂ (bztpen = N-benzyl-N,N',N'-tris (pyridin-2-yl methyl ethylenediamine))) and ([(dbzbpen)Cu(OH₂)] (BF₄)₂ (dbzbpen = N,N'-dibenzyl-N,N'-bis(pyridin-2-ylmethyl) ethylenediamine)) have been reported as water oxidation catalysts in basic medium (pH = 11.5). We explore the O₂ evolution process catalyzed by these copper catalysts with various ligands (L) by applying the first-principles molecular dynamics simulations. First, the oxidation of catalysts to the metal-oxo intermediates [LCu(O)]²⁺ occurs through the proton-coupled electron transfer (PCET) process. These intermediates are involved in the oxygen-oxygen bond formation through the water-nucleophilic addition process. Here, we have considered two types of oxygen-oxygen bond formation. The first one is the transfer of the hydroxide of the water molecule to the Cu═O moiety; the proton transfer to the solvent leads to the formation of the peroxide complex ([LCu(OOH)]⁺). The other is the formation of the hydrogen peroxide complex ([LCu(HOOH)]²⁺) by the transfer of proton and hydroxide of the water molecule to the metal-oxo intermediate. The formation of the peroxide complex requires less activation free energy than hydrogen peroxide formation for both catalysts. We found two transition states in the well-tempered metadynamics simulations: one for proton transfer and another for hydroxide transfer. In both cases, the proton transfer requires higher free energy. Following the formation of the oxygen-oxygen bond, we study the release of the dioxygen molecule. The formed peroxide and hydrogen peroxide complexes are converted into the superoxide complex ([LCu(OO)]²⁺) through the transfer of proton, electron, and PCET processes. The superoxide complex releases an oxygen molecule upon the addition of a water molecule. The free energy of activation for the release of the dioxygen molecule is lesser than that of the oxygen-oxygen bond formation. When we observe the entire water oxidation process, the oxygen-oxygen bond formation is the rate-determining step. We calculated the rates of reaction by using the Eyring equation and found them to be close to the experimental values.

Ligand Radical Mediated Water Oxidation by a Family of Copper o-Phenylene Bis-oxamidate Complexes

Understanding the reactivity landscape for the activation of water until the formation of the O-O bond and O₂ release in molecular chemistry is a decisive step in guiding the elaboration of cost-effective catalysts for the oxygen-evolving reaction (OER). Copper(II) complexes have recently caught the attention of chemists as catalysts for the 4e^-/4H⁺ water oxidation process. While a copper(IV) intermediate has been proposed as the reactive intermediate species, no spectroscopic signature has been reported so far. Copper(III) ligand radical species have also been formulated and supported by theoretical studies. We found, herein, that the reactivity sequence for the water oxidation with a family of Copper(II) o-phenylene bis-oxamidate complexes is a function of the substitution pattern on the periphery of the aromatic ring. In-situ EPR, FTIR, and rR spectroelectrochemical studies helped to sequence the elementary electrochemical and chemical events leading toward the O₂ formation selectively at the copper center. EPR and FTIR spectroelectrochemistry suggests that ligand-centered oxidations are preferred over metal-centered oxidations. rR spectroelectrochemical study revealed the accumulation of a bis-imine bound copper(II) superoxide species, as the reactive intermediate, under catalytic turnover, which provides the evidence for the O-O bond formation during OER.

Mechanistic Understanding of Water Oxidation in the Presence of a Copper Complex by In Situ Electrochemical Liquid Transmission Electron Microscopy

The design of molecular oxygen-evolution reaction (OER) catalysts requires fundamental mechanistic studies on their widely unknown mechanisms of action. To this end, copper complexes keep attracting interest as good catalysts for the OER, and metal complexes with TMC (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane) stand out as active OER catalysts. A mononuclear copper complex, [Cu(TMC)(H₂O)](NO₃)₂ (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane), combined both key features and was previously reported to be one of the most active copper-complex-based catalysts for electrocatalytic OER in neutral aqueous solutions. However, the functionalities and mechanisms of the catalyst are still not fully understood and need to be clarified with advanced analytical studies to enable further informed molecular catalyst design on a larger scale. Herein, the role of nanosized Cu oxide particles, ions, or clusters in the electrochemical OER with a mononuclear copper(II) complex with TMC was investigated by operando methods, including in situ vis-spectroelectrochemistry, in situ electrochemical liquid transmission electron microscopy (EC-LTEM), and extended X-ray absorption fine structure (EXAFS) analysis. These combined experiments showed that Cu oxide-based nanoparticles, rather than a molecular structure, are formed at a significantly lower potential than required for OER and are candidates for being the true OER catalysts. Our results indicate that for the OER in the presence of a homogeneous metal complex-based (pre)catalyst, careful analyses and new in situ protocols for ruling out the participation of metal oxides or clusters are critical for catalyst development. This approach could be a roadmap for progress in the field of sustainable catalysis via informed molecular catalyst design. Our combined approach of in situ TEM monitoring and a wide range of complementary spectroscopic techniques will open up new perspectives to track the transformation pathways and true active species for a wide range of molecular catalysts.

Homogeneous Catalysts Based on First-Row Transition-Metals for Electrochemical Water Oxidation

Strategies that enable the renewable production of storable fuels (i. e. hydrogen or hydrocarbons) through electrocatalysis continue to generate interest in the scientific community. Of central importance to this pursuit is obtaining the requisite chemical (H+ ) and electronic (e- ) inputs for fuel-forming reduction reactions, which can be met sustainably by water oxidation catalysis. Further possibility exists to couple these redox transformations to renewable energy sources (i. e. solar), thus creating a carbon neutral solution for long-term energy storage. Nature uses a Mn-Ca cluster for water oxidation catalysis via multiple proton-coupled electron-transfers (PCETs) with a photogenerated bias to perform this process with TOF 100∼300 s-1 . Synthetic molecular catalysts that efficiently perform this conversion commonly utilize rare metals (e. g., Ru, Ir), whose low abundance are associated to higher costs and scalability limitations. Inspired by nature's use of 1st row transition metal (TM) complexes for water oxidation catalysts (WOCs), attempts to use these abundant metals have been intensively explored but met with limited success. The smaller atomic size of 1st row TM ions lowers its ability to accommodate the oxidative equivalents required in the 4e- /4H+ water oxidation catalysis process, unlike noble metal catalysts that perform single-site electrocatalysis at lower overpotentials (η). Overcoming the limitations of 1st row TMs requires developing molecular catalysts that exploit biomimetic phenomena - multiple-metal redox-cooperativity, PCET and second-sphere interactions - to lower the overpotential, preorganize substrates and maintain stability. Thus, the ultimate goal of developing efficient, robust and scalable WOCs remains a challenge. This Review provides a summary of previous research works highlighting 1st row TM-based homogeneous WOCs, catalytic mechanisms, followed by strategies for catalytic activity improvements, before closing with a future outlook for this field.

Electrocatalytic oxidation of water using self-assembled copper(ii) tetraaza macrocyclic complexes on a 4-(pyridine-4′-amido)benzene grafted gold electrode

Gold surface anchored copper(ii)tetraaza macrocyclic complex showed an excellent electrocatalytic activity towards water oxidation with an overpotential of 284 mV at a current density of 1.31 mA cm⁻² and a Tafel slope of 48 mV decade⁻¹ in neutral pH.

Electrochemical water oxidation by a copper complex with an N4-donor ligand under neutral conditions

A mononuclear copper(ii) complex [Cu(H2L)](NO3)2 with an N4-donor redox-active ligand is found to be an efficient homogeneous catalyst for electrochemical water oxidation with the assistance of ligand oxidation.

Water Oxidation at Neutral pH using a Highly Active Copper-Based Electrocatalyst

The sluggish kinetics of the oxygen evolution reaction (OER) at the anode severely limit hydrogen production at the cathode in water splitting systems. Although electrocatalytic systems based on cheap and earth-abundant copper catalysts have shown promise for water oxidation under basic conditions, only very few examples with high overpotential can be operated under acidic or neutral conditions, even though hydrogen evolution in the latter case is much easier. This work presents an efficient and robust Cu-based molecular catalyst, which self-assembles as a periodic film from its precursors under aqueous conditions on the surface of a glassy carbon electrode. This film catalyzes the OER under neutral conditions with impressively low overpotential. In controlled potential electrolysis, a stable catalytic current of 1.0 mA cm^-2 can be achieved at only 2.0 V (vs. RHE) and no significant decrease in the catalytic current is observed even after prolonged bulk electrolysis. The catalyst displays first-order kinetics and a single site mechanism for water oxidation with a TOF (k_cat ) of 0.6 s^-1 . DFT calculations on of the periodic Cu(TCA)₂ (HTCA=1-mesityl-1H-1,2,3-triazole-4-carboxylic acid) film reveal that TCA defects within the film create Cu^I active sites that provide a low overpotential route for OER, which involves Cu^I , Cu^II -OH, Cu^III =O and Cu^II -OOH intermediates and is enabled at a potential of 1.54 V (vs. RHE), requiring an overpotential of 0.31 V. This corresponds well with an overpotential of approximately 0.29 V obtained experimentally for the grown catalytic film after 100 CV cycles at pH 6. However, to reach a higher current density of 1 mA cm^-2 , an overpotential of 0.72 V is required.

Copper Coordination Complexes for Energy-Relevant Applications

Copper coordination complexes have emerged as a group of transition metal complexes that play important roles in solar energy conversion, utilization and storage, and have the potential to replace the quintessential commonly used transition metals, like Co, Pt, Ir and Ru as light sensitizers, redox mediators, electron donors and catalytic centers. The applications of copper coordination compounds in chemistry and energy related technologies are many and demonstrate their rightful place as sustainable, low toxicity and Earth-abundant alternative materials. In this perspective we show the most recent impact made by copper coordination complexes in dye-sensitized solar cells and other energy relevant applications.

Copper-based homogeneous and heterogeneous catalysts for electrochemical water oxidation

Water oxidation is currently believed to be the bottleneck in the field of electrochemical water splitting and artificial photosynthesis. Enormous efforts have been devoted toward the exploration of water oxidation catalysts (WOCs), including homogeneous and heterogeneous catalysts. Recently, Cu-based WOCs have been widely developed because of their high abundance, low cost, and biological relevance. However, to the best of our knowledge, no review has been made so far on such types of catalysts. Thus, we have summarized the recent progress made in the development of homogeneous and heterogeneous Cu-based WOCs for electrochemical catalysis. Furthermore, the evaluations of catalytic activity, stability, and mechanism of these catalysts are carefully concluded and highlighted. We believe that this review can summarize the current progress in the field of Cu-based electrochemical WOCs and help in the design of more efficient and stable WOCs.

Detection of hydrogen sulfide in water samples with 2-(4-hydroxyphenyl)-4,5-di(2-pyridyl)imidazole-copper(II) complex using environmentally green microplate fluorescence assay method

Hydrogen sulfide (H₂S) is a colorless toxic gas which can be found as HS^- in rivers and waste waters especially in the occupational susceptible environment. Herein we synthesized a lophine analogue, 2-(4-hydroxyphenyl)-4,5-di(2-pyridyl)imidazole (HPI), which fluoresces at 410 nm after excitation at 280 nm. HPI has an imidazole ring and a pyridine ring which are capable of forming coordinate bonds with copper (Cu(II)) that cause quenching of HPI fluorescence. We found that HS^- can selectively liberate HPI from the complex via formation of CuS, thus, HPI regains its fluorescence properties. Interestingly, the probe was proved to be regenerable. This reaction was used for the development of a fluorescence microplate assay for the determination of HS^- in environmental samples. The method was applied to river water samples and was able to detect HS^- in concentrations down to 5 ppb with acceptable accuracy (90.3-103.0%) and good precision (%RSD ≤ 4.1). The method showed many advantages over the previously reported ones including instantaneous reaction, simple probe synthesis, high-throughput, high selectivity toward hydrogen sulfide over other ions and sulfur or thiol containing compounds and at last, it complies with the green chemistry rules through using a regenerable probe, aqueous solvents, and miniaturized measurement system.

Recent Advances in the Development of Molecular Catalyst-Based Anodes for Water Oxidation toward Artificial Photosynthesis

Catalytic water oxidation represents a bottleneck for developing artificial photosynthetic systems that store solar energy as renewable fuels. A variety of molecular water oxidation catalysts (WOCs) have been reported over the last two decades. In view of their applications in artificial photosynthesis devices, it is essential to immobilize molecular catalysts onto the surfaces of conducting/semiconducting supports for fabricating efficient and stable water oxidation anodes/photoanodes. Molecular WOC-based anodes are essential for developing photovoltaic artificial photosynthesis devices and, moreover, the performance of molecular WOC on anodes will provide important insight into designing extended molecular WOC-based photoanodes for photoelectrochemical (PEC) water oxidation. This Review concerns recent progress in the development of molecular WOC-based anodes over the last two decades and looks at the prospects for using such anodes in artificial photosynthesis.

Efficient visible light-driven water oxidation catalysed by an iron(iv) clathrochelate complex

A water-stable FeIV clathrochelate complex catalyses fast and homogeneous photochemical oxidation of water to dioxygen with a turnover frequency of 2.27 s-1 and a maximum turnover number of 365. An FeV intermediate generated under catalytic conditions is trapped and characterised using EPR and Mössbauer spectroscopy.

Copper Containing Molecular Systems in Electrocatalytic Water Oxidation—Trends and Perspectives

Molecular design represents an exciting platform to refine mechanistic details of electrocatalytic water oxidation and explore new perspectives. In the growing number of publications some general trends seem to be outlined concerning the operation mechanisms, with the help of experimental and theoretical approaches that have been broadly applied in the case of bioinorganic systems. In this review we focus on bio-inspired Cu-containing complexes that are classified according to the proposed mechanistic pathways and the related experimental evidence, strongly linked to the applied ligand architecture. In addition, we devote special attention to features of molecular compounds, which have been exploited in the efficient fabrication of catalytically active thin films.

Low overpotential water oxidation at neutral pH catalyzed by a copper(ii) porphyrin

Low-overpotential water oxidation catalyzed by copper(ii) porphyrin to produce O₂ in neutral aqueous solution and H₂O₂ in acidic solution.

Low overpotential water oxidation under mild conditions is required for new energy conversion technologies with potential application prospects. Extensive studies on molecular catalysis have been performed to gain fundamental knowledge for the rational designing of cheap, efficient and robust catalysts. We herein report a water-soluble Cu^II complex of tetrakis(4-N-methylpyridyl)porphyrin (1), which catalyzes the oxygen evolution reaction (OER) in neutral aqueous solutions with small overpotentials: the onset potential of the catalytic water oxidation wave measured at current density j = 0.10 mA cm^–2 is 1.13 V versus a normal hydrogen electrode (NHE), which corresponds to an onset overpotential of 310 mV. Constant potential electrolysis of 1 at neutral pH and at 1.30 V versus NHE displayed a substantial and stable current for O₂ evolution with a faradaic efficiency of >93%. More importantly, in addition to the 4e water oxidation to O₂ at neutral pH, 1 can catalyze the 2e water oxidation to H₂O₂ in acidic solutions. The produced H₂O₂ is detected by rotating ring–disk electrode measurements and by the sodium iodide method after bulk electrolysis at pH 3.0. This work presents an efficient and robust Cu-based catalyst for water oxidation in both neutral and acidic solutions. The observation of H₂O₂ during water oxidation catalysis is rare and will provide new insights into the water oxidation mechanism.

Electrochemical water oxidation using a copper complex

This study highlights the importance of proton coupled electron transfer (PCET) during electrochemical-driven water oxidation catalysis employing a copper complex.

Heterogeneous catalytic water oxidation controlled by coordination geometries of copper(ii) centers with thiolato donors

Heterometallic coordination compounds containing a thiolato dicopper(ii) core increase heterogeneous electrocatalytic activities for water oxidation in proportion to the numbers of vacant dicopper(ii) coordination sites.

Magnetic relaxation in [Ln(hfac)4]− anions with [Cu(hfac)-radical]nn+ cation chains as counterions

Two novel 3d–4f compounds involving [Ln(hfac)₄]⁻ anions and {[Cu-radical]⁺}_n cation chains are presented. The Dy derivative exhibits slow magnetization relaxation.

An octanuclear Cu(ii) cluster with a bio-inspired Cu4O4 cubic fragment for efficient photocatalytic water oxidation

An octanuclear Cu(ii) cluster [Cu₈(dpk·OH)₈(OAc)₄](ClO₄)₄ was found to be an efficient homogeneous catalyst for photocatalytic water oxidation with an oxygen yield, TON and TOF of 35.6%, 178 and 3.6 s⁻¹, respectively.

Cu(ii) coordination polymers with nitrogen catenation ligands for efficient photocatalytic water oxidation

Cu(ii) coordination polymers with nitrogen catenation ligands can photocatalyze water oxidation with the highest TOF (1.68 s⁻¹) among copper-based photocatalysts.

Improvement of Electrochemical Water Oxidation by Fine-Tuning the Structure of Tetradentate N4 Ligands of Molecular Copper Catalysts

Two copper complexes, [(L1)Cu(OH₂ )](BF₄ )₂ [1; L1=N,N'-dimethyl-N,N'-bis(pyridin-2-ylmethyl)-1,2-diaminoethane] and [(L2)Cu(OH₂ )](BF₄ )₂ [2, L2=2,7-bis(2-pyridyl)-3,6-diaza-2,6-octadiene], were prepared as molecular water oxidation catalysts. Complex 1 displayed an overpotential (η) of 1.07 V at 1 mA cm^-2 and an observed rate constant (k_obs ) of 13.5 s^-1 at η 1.0 V in pH 9.0 phosphate buffer solution, whereas 2 exhibited a significantly smaller η (0.70 V) to reach 1 mA cm^-2 and a higher k_obs (50.4 s^-1 ) than 1 under identical test conditions. Additionally, 2 displayed better stability than 1 in controlled potential electrolysis experiments with a faradaic efficiency of 94 % for O₂ evolution at 1.58 V, when a casing tube was used for the Pt cathode. A possible mechanism for 1- and 2-catalyzed O₂ evolution reactions is discussed based on the experimental evidence. These comparative results indicate that fine-tuning the structures of tetradentate N₄ ligands can bring about significant change in the performance of copper complexes for electrochemical water oxidation.

Electrocatalytic Water Oxidation by a Homogeneous Copper Catalyst Disfavors Single-Site Mechanisms

Deployment of solar fuels derived from water requires robust oxygen-evolving catalysts made from earth abundant materials. Copper has recently received much attention in this regard. Mechanistic parallels between Cu and single-site Ru/Ir/Mn water oxidation catalysts, including intermediacy of terminal Cu oxo/oxyl species, are prevalent in the literature; however, intermediacy of late transition metal oxo species would be remarkable given the high d-electron count would fill antibonding orbitals, making these species high in energy. This may suggest alternate pathways are at work in copper-based water oxidation. This report characterizes a dinuclear copper water oxidation catalyst, {[(L)Cu(II)]₂-(μ-OH)₂}(OTf)₂ (L = Me₂TMPA = bis((6-methyl-2-pyridyl)methyl)(2-pyridylmethyl)amine) in which water oxidation proceeds with high Faradaic efficiency (>90%) and moderate rates (33 s^-1 at ∼1 V overpotential, pH 12.5). A large kinetic isotope effect (k_H/k_D = 20) suggests proton coupled electron transfer in the initial oxidation as the rate-determining step. This species partially dissociates in aqueous solution at pH 12.5 to generate a mononuclear {[(L)Cu(II)(OH)]}⁺ adduct (K_eq = 0.0041). Calculations that reproduce the experimental findings reveal that oxidation of either the mononuclear or dinuclear species results in a common dinuclear intermediate, {[LCu(III)]₂-(μ-O)₂}²⁺, which avoids formation of terminal Cu(IV)═O/Cu(III)-O^• intermediates. Calculations further reveal that both intermolecular water nucleophilic attack and redox isomerization of {[LCu(III)]₂-(μ-O)₂}²⁺ are energetically accessible pathways for O-O bond formation. The consequences of these findings are discussed in relation to differences in water oxidation pathways between Cu catalysts and catalysts based on Ru, Ir, and Mn.

Electrocatalytic water oxidation by Cu(ii) ions in a neutral borate buffer solution

Herein we report that a Cu(ii) salt can efficiently catalyze water oxidation in a neutral borate buffer.

Armed by Asp? C-terminal carboxylate in a Dap-branched peptide and consequences in the binding of CuII and electrocatalytic water oxidation

C-Terminal carboxylate in branched peptide allows insight into water oxidation electrocatalysis by Cu-complexes, revealing differences to homologues with varied modules.

Electrocatalytic water oxidation by copper(ii) complexes containing a tetra- or pentadentate amine-pyridine ligand

Two copper(ii) complexes were demonstrated to be catalytically active for electrochemical water oxidation with good stability in pH 11.5 solutions.