A MnO2 nanosheet-assisted GSH detection platform using an iridium(iii) complex as a switch-on luminescent probe

Design and application of a highly selective and sensitive fluorescent probe for continuous detection of Cu2+ and GSH with bioimaging

Optimal levels of Cu2+ are essential for the proper functioning of organisms, while excessive quantities lead to significant detrimental effects. In this study, a Schiff base fluorescent probe XSF based on 3-aminobenzo[b]thiophene-2-carboxylate was been successfully designed and synthesized. The synthesis pathway of XSF is highly convenient, enabling the detection of Cu2+ through a dual channel mechanism involving fluorescence quenching and colorimetric response. It exhibits exceptional sensitivity with an extremely low detection limit (2.91 × 10-7 M), rapid response kinetics (less than 10 s), and applicability within a pH range of 3-9. The fluorescence quenching of XSF by Cu2+ was reasonably explained using techniques such as 1H NMR and DFT calculations. In addition, satisfactory recovery rates were achieved in the detection of Cu2+ in actual samples such as drinking water, ginger, and chocolate. The visual detection method was successfully applied to real samples including cellophane noodles and towels, and XSF test papers were prepared, fully demonstrating the potential of XSF for practical testing applications. The XSF-Cu2+ system demonstrates high sensitivity in the detection of GSH (LOD = 8.73 × 10-7 M) and exhibits a remarkable enhancement in fluorescence response. XSF has successfully demonstrated its application in the detection of Cu2+ and GSH within cells, thus highlighting its potential as a promising tool in the field of biology.

A sheltering ratio fluorescence composite based on BR-CDs for selectivity detection of GSH

To distinguish different biothiol species and resolve cysteine interference in fluorescence detection, a fluorescence ratio strategy with shielding effect that specifically responds to GSH without Cys interference was constructed by employing the composite of blue-emitting (B-CDs) and red-emitting carbon dots (R-CDs). The constructed BR-CDs composite showed a decrease in red-emission intensity and simultaneous recovery of blue-emission intensity in the presence of GSH, while the ratio of dual-emission fluorescence intensity, FL440/FL620, showed a superior linear response to GSH in the range of 30-500 μmol/L with a limit of detection (LOD) of 5.27 μmol/L. This designed strategy exhibited excellent performance in the detection of GSH. The BR-CDs complexes were effective in estimating GSH levels in a variety of food matrices, including tomato, pear and potato, with recoveries% ranging from 94.36 % to 112.02 % and RSD% below 0.41 %, demonstrating the potential of the composites for the selective quantitative detection of GSH.

Dual-Function Bis-Tetraphenylethenes for Selective Metal Ion and Glutathione Detection and Current Transformer Application

This study reports the synthesis of bis-substituted tetraphenylethenes (TPEs) and the investigation of their photophysical and photochemical properties. Utilizing the aggregation-induced emission characteristic of TPEs, this study demonstrates that BPh-TPE and BRh-TPE function as "turn-off" fluorescent sensors for detecting Cu2+ and Hg2+/Ag+, respectively, exhibiting quenched fluorescence in the presence of these ions. The limits of detection (LODs) for Cu2+, Hg2+, and Ag+ are determined to be 299, 522 nM, and 1.58 μM, respectively. Interestingly, the probes also show "turn-on" fluorescence upon the addition of glutathione (GSH) in the presence of Cu2+ or Hg2+. Specifically, the LOD for GSH using the BPh-TPE-Cu2+ complex is 457 nM. Practical applicability is confirmed via visual color changes on filter paper and in water samples. These findings highlight the potential of these TPE derivatives for detecting copper, mercury, silver ions, and GSH in environmental water. Additionally, Al/organic layer/p-Si heterojunction devices incorporating spin-coated TPE layers are fabricated. Their electrical behaviors are analyzed through current-voltage and current-time measurements under varying light conditions. Transient photocurrent analysis indicates strong photoresponse, supporting their suitability for optoelectronic and photovoltaic applications.

A mitochondria-targeted iridium(III) complex-based sensor for endogenous GSH detection in living cells

Glutathione (GSH) plays an important role in maintaining redox homeostasis in biological systems. Development of reliable glutathione sensors is of great significance to better understand the role of biomolecules in living cells and organisms. Based on the advantages of the photophysical properties of iridium complexes, we proposed a "turn-on" phosphorescent sensor. Ir-DNFB has the characteristics of a large Stokes shift, high sensitivity for GSH detection, low cytotoxicity, and extremely short response time, and can specifically analyze glutathione in living cells and highly target endogenous glutathione in mitochondria. The N-H group on the imidazole ring of Ir-DNFB could form a new electrostatic interaction with the α-carboxyl group on the glutamate moiety of glutathione. The nucleophilic attack reaction was regulated by the sulfhydryl group on GSH, following which the ether bond linking the 2,4-dinitrobenzene to probe Ir-DNFB was broken, accompanied with a phosphorescence enhancement. Most importantly, the process of recognizing glutathione was not affected by other amino acids. Overall, this work provided a very useful tool for rapidly distinguishing between normal, inflammatory, and progressive tumor cells.

In-situ synthesis of 2D nanozymes-coated cellulose nanofibers on paper-based chips for portable detection of biothiols

BACKGROUND

Simple, fast and low-cost paper-based analytical devices (PADs) have a good application prospect for point-of-care detection of GSH. However, effective immobilization of functional nanomaterials onto cellulose, as a critical factor in the construction of PADs, presents numerous difficulties and challenges.

RESULTS

In this study, we have developed an exceptionally straightforward and environmentally friendly synthetic approach by using ovalbumin (OVA) as a bio-mineralization template for the preparation of MnO2 nanosheets. The MnO2 nanosheets produced in the solution phase exhibited excellent intrinsic nano-enzyme activity and biodegradability. The OVA-MnO2 nanosheets can effectively oxidize Amplex red in the absence of H2O2, enabling sensitive detection of GSH with a linear range of 5 nM-10 μM and a detection limit as low as 2.8 nM. Furthermore, we utilized this method to facilitate in situ synthesis of OVA-MnO2 nanosheets directly on paper substrates. This approach eliminates the need for conventional stirring and centrifugation steps, greatly simplifying the fabrication process while reducing material usage and time expenditure. Characterization of the chemical composition and morphology confirmed the intimate growth of the 2D nano-enzymes on the cellulose fibers. Utilizing smartphone capabilities, the OVA-MnO2 nanosheet-modified PAD enabled instrument-free detection of GSH, demonstrating high sensitivity (0.74 μM) and a wide linear response range (1-1000 μM).

SIGNIFICANCE

The synthesis of MnO2 nanosheets directly on cellulose substrates substantially streamlines the modification workflow of PADs and reduces detection costs, offering new avenues for clinical diagnostics of relevant diseases.

A Sensitive and Quick Fluorescent Sensor for the "Turn-On" Detection and Imaging of Glutathione Based on Sulfur Quantum Dots and MnO2 Nanosheets

Glutathione (GSH) is one of the most abundant bioethanol antioxidants in living cells. Here, a fluorescent probe based on MnO2 nanosheets and sulfur quantum dots (SQDs) was fabricated. Because of the synergistic effect of IFE and FRET, the fluorescence from SQDs was quenched by MnO2 nanosheets. In the presence of GSH, the fluorescence of SQDs could be recovered because of the reduction of MnO2 nanosheets by GSH. The method can detect GSH in the concentration range of 5 ~ 1000 μM with the detection limit as low as 1.26 μM. This quick, easy, and cost-effective sensor could be used for the quantification of GSH in serum samples and the imaging of GSH in Escherichia coli O157:H7.

Drip-Dry Strategy Assisted Blu-Ray Disc Biosensor for Fast Point of Care Testing

Discs and numerous other consumer products have been developed for point of care testing (POCT) to replace traditional large and expensive biochemical devices in certain scenarios. Herein, we propose a drip-dry strategy (2D strategy) assisted Blu-ray disc (BD) biosensor, termed BDB, for rapid and portable POCT within 30 min with the cost of a single test < $1. The platform utilizes the covered area formed by the deposition of the substance to be measured on the activated BD surface after the evaporation of water and realizes the quantitative detection of the target through the error readout of free disc quality diagnosis software. As a proof of concept, we first demonstrated the feasibility of direct quantitative detection of substances in solution in a single system through the detection of pure proteins avoiding colorimetric reagent used in traditional optical detection. For the complex mixed systems, we then innovatively utilize the principle that soluble targets promote/inhibit the dissolution of insoluble precipitates to achieve specific detection of targets and successfully apply BDB to the indirect quantitative detection of glutathione (GSH) with LOD of 0.447 mM in the range of 2-16 mM and organophosphorus pesticides (OPs) with LOD of 2.122 × 10-7 M in the range of 1.289 × 10-7-1.289 × 10-4 M. The BDB is widely applicable, easy to operate, and less time-consuming, which is anticipated to provide an alternative method for early, on-site detection or screening.

Shining New Light on Biological Systems: Luminescent Transition Metal Complexes for Bioimaging and Biosensing Applications

Luminescence imaging is a powerful and versatile technique for investigating cell physiology and pathology in living systems, making significant contributions to life science research and clinical diagnosis. In recent years, luminescent transition metal complexes have gained significant attention for diagnostic and therapeutic applications due to their unique photophysical and photochemical properties. In this Review, we provide a comprehensive overview of the recent development of luminescent transition metal complexes for bioimaging and biosensing applications, with a focus on transition metal centers with a d6, d8, and d10 electronic configuration. We elucidate the structure-property relationships of luminescent transition metal complexes, exploring how their structural characteristics can be manipulated to control their biological behavior such as cellular uptake, localization, biocompatibility, pharmacokinetics, and biodistribution. Furthermore, we introduce the various design strategies that leverage the interesting photophysical properties of luminescent transition metal complexes for a wide variety of biological applications, including autofluorescence-free imaging, multimodal imaging, organelle imaging, biological sensing, microenvironment monitoring, bioorthogonal labeling, bacterial imaging, and cell viability assessment. Finally, we provide insights into the challenges and perspectives of luminescent transition metal complexes for bioimaging and biosensing applications, as well as their use in disease diagnosis and treatment evaluation.

Facile, green and scalable synthesis of single-layer manganese dioxide nanosheets and its application for GSH and cTnI colorimetric detection

Manganese dioxide (MnO2) nanosheets possess unique physical and chemical properties, making them widely applicable in various fields, such as chemistry and biomedicine. Although MnO2 nanosheets are produced using bottom-up wet chemistry synthesis methods, their scale is below the gram level and requires a long processing time, restricting their effective scale-up from laboratory to market. We report a facile, green and scalable synthesis of MnO2 nanosheets by mixing Shiranui mandarin orange juice and KMnO4 for 30 minutes. We produced more than one gram (1.095) of MnO2 nanosheets with a 0.65 nm mean thickness and a 50 nm mean lateral size. Furthermore, we established a visual colorimetric biosensing strategy based on MnO2 nanosheets for the assay of glutathione (GSH) and cardiac troponin I (cTnI), offering high sensitivity and feasibility in clinical samples. For GSH, the limit of detection was 0.08 nM, and for cTnI, it was 0.70 pg mL-1. Meanwhile, the strategy can be used for real-time analysis by applying a smartphone-enabled biosensing strategy, which can provide point-of-care testing in remote areas.

A bimodal time-gated luminescence-magnetic resonance imaging nanoprobe based on a europium(III) complex anchored on BSA-coated MnO2 nanosheets for highly selective detection of H2O2

A novel nanocomposite, [Eu(BTD)3(DPBT)]-BSA@MnO2, is reported to serve as an effective nanoprobe for bimodal time-gated luminescence (TGL) and magnetic resonance (MR) imaging of H2O2in vitro and in vivo. The nanoprobe was fabricated by immobilizing visible-light-excitable Eu3+ complexes in bovine serum albumin (BSA)-coated lamellar MnO2 nanosheets. The TGL of the Eu3+ complex was effectively quenched by the MnO2 nanosheets. Upon exposure to H2O2, the MnO2 nanosheets underwent reduction to Mn2+, which simultaneously triggered rapid, selective and sensitive "turn-on" responses toward H2O2 in both TGL and MR detection modes. The presence of a protective "corona" formed by BSA enables the nanoprobe to withstand high concentrations of glutathione (GSH), a strong reducing agent of MnO2 nanosheets. This capability allows the nanoprobe to be utilized for detecting H2O2 in living biosamples. The combined utilization of TGL and MR detection modes enables the nanoprobe to image H2O2 across a wide range of resolutions, from the subcellular level to the whole body, without any depth limitations. The results obtained from these modes can be cross-validated, enhancing the accuracy of the detection. The capability of the nanoprobe was validated by TGL imaging of endogenous and exogenous H2O2 in live HeLa cells, as well as bimodal TGL-MR imaging of H2O2 in tumor-bearing mice. The research achievements suggest that the integration of luminescent lanthanide complexes with protein-coated MnO2 nanosheets offers a promising bimodal TGL-MR sensing platform for H2O2in vitro and in vivo.

Synthesis of Phenol-Hydrazide-Appended Tetraphenylethenes as Novel On-Off-On Cascade Sensors of Copper and Glutathione

This study reports the synthesis of novel fluorescent probes, phenol-hydrazide-appended tetraphenylethenes (TPEs I and II), and explores their photochemical properties. The probes exhibit aggregation-induced emission (AIE) in increasing water content, as observed using fluorescence spectroscopy. Further investigation with UV-vis and fluorescence techniques revealed their potential as ion sensors. Both TPE I and TPE II act as "turn-off" sensors for Cu2+ ions, showing decreased fluorescence intensity in their presence. Their limit of detection (LOD) and association constant (K a) for Cu2+ were found to be comparable at 747 nM/597 nM, and 2.46 × 105 M-1/2/1.78 × 105 M-1/2, respectively. Moreover, the quantum yields of TPE I and TPE II were also calculated and found to be 0.651 and 0.325, respectively. Interestingly, these probes also function as "turn-on" sensors for glutathione (GSH) in the presence of copper. This means their fluorescence can be reversibly switched off and on by alternating CuCl2 and GSH additions. Moreover, the LOD values for GSH with TPE II-Cu2+ were calculated to be 544 nM. In addition, the investigation also employed visual analysis to assess the color alterations of TPEs on filter paper and in real water samples. Overall, this research introduces promising new probes with potential applications in copper ion detection and biomolecule glutathione sensing in real water samples.

A dual-channel sensor array for discrimination of biothiols based on manganese dioxide nanosheets

A dual-signal sensor array for highly sensitive identification of biothiols is reported based on different optical responses of MnO₂/curcumin (CUR) system to different biothiols. The addition of MnO₂ nanosheets (MnO₂ NSs) quenches the fluorescence of CUR, and the color of the mixture changes from yellow to brown. In the presence of reductive biothiols, MnO₂ NSs are etched and lose their fluorescence quenching ability, resulting in an increase in the fluorescence intensity of CUR at 540 nm and a decrease in the absorbance at 430 nm. The sensor array generates specific response modes based on the varying reduction abilities of different biothiols, which can be distinguished by linear discriminant analysis (LDA). The sensor array successfully distinguished five biothiols (glutathione (GSH), dithiothreitol (DTT), cysteine (Cys), mercaptoethanol (ME), and homocysteine (Hcy)) across a wide concentration range (1 μM-100 μM) and biothiol mixtures with varing molar ratios.

Plasmonic Cu2-xSe Mediated Colorimetric/Photothermal Dual-Readout Detection of Glutathione

Plasmonic nanomaterials have attracted great attention in the field of catalysis and sensing for their outstanding electrical and optical properties. Here, a representative type of nonstoichiometric Cu_2-xSe nanoparticles with typical near-infrared (NIR) localized surface plasma resonance (LSPR) properties originating from their copper deficiency was applied to catalyze the oxidation of colorless TMB into their blue product in the presence of H₂O₂, indicating they had good peroxidase-like activity. However, glutathione (GSH) inhibited the catalytic oxidation of TMB, as it can consume the reactive oxygen species. Meanwhile, it can induce the reduction of Cu(II) in Cu_2-xSe, resulting in a decrease in the degree of copper deficiency, which can lead to a reduction in the LSPR. Therefore, the catalytic ability and photothermal responses of Cu_2-xSe were decreased. Thus, in our work, a colorimetric/photothermal dual-readout array was developed for the detection of GSH. The linear calibration for GSH concentration was in the range of 1-50 μM with the LOD as 0.13 μM and 50-800 μM with the LOD as 39.27 μM. To evaluate the practicability of the assay, tomatoes and cucumbers were selected as real samples, and good recoveries indicated that the developed assay had great potential in real applications.

AND-Gated Nanosensor for Imaging of Glutathione and Apyrimidinic Endonuclease 1 in Cells, Animals, and Organoids

The development of a strategy for imaging of glutathione (GSH) and apurinic/apyrimidinic endonuclease 1 (APE1) in an organism remains challenging despite their significance in elaborating the correlated pathophysiological processes. Therefore, in this study, we propose a DNA-based AND-gated nanosensor for fluorescence imaging of the GSH as well as APE1 in living cells, animals, and organoids. The DNA probe is composed of a G-strand and A-strand. The disulfide bond in the G-strand is cleaved through a GSH redox reaction, and the hybridization stability between the G-strand and A-strand is decreased, leading to a conformational change of the A-strand. In the presence of APE1, the apurinic/apyrimidinic (AP) site in the A-strand is digested, producing a fluorescence signal for the correlated imaging of GSH and APE1. This nanosensor enables monitoring of the expression level change of GSH and APE1 in cells. Additionally, we illustrate the capability of this "dual-keys-and-locked" conceptual methodology in achieving specific tumor imaging when GSH and APE1 are present simultaneously (overexpressed GSH and APE1 in tumor cells) with improving tumor-to-normal tissue ratio in vivo. Furthermore, using this nanosensor, the GSH and APE1 also are visualized in organoids that recapitulate the phenotypic and functional traits of the original biological specimens. Overall, this study demonstrates the potential of our proposed biosensing technology in investigating the roles of various biological molecules involved in specific diseases.

An activatable nanoprobe based on nanocomposites of visible-light-excitable europium(III) complex-anchored MnO2 nanosheets for bimodal time-gated luminescence and magnetic resonance imaging of tumor cells

Bimodal imaging probes that combine magnetic resonance imaging (MRI) and photoluminescence imaging are quite appealing since they can supply both anatomical and molecular information to effectively ameliorate the accuracy of detection. In this study, an activatable nanoprobe, [Eu(BTD)₃(DPBT)]@MnO₂, for bimodal time-gated luminescence imaging (TGLI) and MRI has been constructed by anchoring visible-light-excitable Eu³⁺ complexes on lamellar MnO₂ nanosheets. Due to the luminescence quenching effect and non-magnetic resonance (MR) activity of MnO₂ nanosheets, the developed nanoprobe presents quite weak TGL and MR signals. After exposure to H₂O₂ or GSH, accompanied by the transformation from MnO₂ to Mn²⁺, the nanoprobe exhibits rapid, sensitive, and selective "turn-on" responses towards GSH and H₂O₂ in TGL and MR detection modes. Furthermore, the nanoprobe displays high stability, low cytotoxicity, good biocompatibility and water dispersion. Given the high contents of GSH and H₂O₂ in cancer cells, the nanoprobe was used for the identification of cancer cells by TGLI of intracellular GSH and H₂O₂, as well as for the tracing of tumor cells in tumor-bearing mice by tumor-targeting in vivo MRI and TGLI of tumor tissues. The research outcomes proved the potential of [Eu(BTD)₃(DPBT)]@MnO₂ as a useful nanoprobe for the tracing and accurate detection of cancer cells in vitro and in vivo via bimodal TGLI and MRI.

Visual Detection and Sensing of Mercury Ions and Glutathione Using Fluorescent Copper Nanoclusters

Visual detection of mercury ions and glutathione is of great significance to public health and environmental issues. Herein, we developed a fluorescent sensor (l-Cys/CuNCs@ESM) based on the eggshell membrane (ESM) and red-emitting copper nanoclusters (CuNCs) by the in situ strategy via l-cysteine (l-Cys) as the reducing and protective agent for mercury ions and glutathione sensing visually. The as-prepared fluorescent product had good stability, portability, large Stokes shift (250 nm), and long fluorescence lifetime (7.3 μs). Notably, the l-Cys/CuNCs@ESM exhibited a specific fluorescence quenching response toward Hg²⁺. Moreover, the interaction between glutathione (GSH) and Hg²⁺ could subsequently recover the fluorescence effectively. Inspired by this "on-off-on" switch, the l-Cys/CuNCs@ESM was applied as the dual-sensing system for visual detection of mercury ions and glutathione integrating with the portable smartphone. The limit of detection (LOD) of Hg²⁺ is 1.1 μM for visualization and 0.52 μM for the fluorescence spectrometer. The corresponding LODs of GSH are 2.8 and 0.59 μM, respectively. This platform presents significant sensitivity, specificity, and stability, offering a promising potential for real-time/on-site sensing.

Construction of an aggregation-induced electrochemiluminescent sensor based on an aminal-linked covalent organic framework for sensitive detection of glutathione in human serum

We demonstrate the construction of an aggregation-induced electrochemiluminescent (AIECL) sensor for glutathione (GSH) assay by integrating an aminal-linked covalent organic framework (A-COF) with manganese dioxide (MnO₂) nanosheets. The AIECL of the A-COF is quenched by the MnO₂ nanosheets via electrochemiluminescent resonance energy transfer (ERET) from the excited A-COF to MnO₂. The presence of GSH can reduce the MnO₂ nanosheets into Mn²⁺, restoring the AIECL emission of the A-COF. This AIECL sensor has the characteristics of fast response, high sensitivity, and good selectivity toward GSH, and it can accurately measure GSH in human serum.

Colorimetric sensing of glucose and GSH using core-shell Cu/Au nanoparticles with peroxidase mimicking activity

The catalytic properties of bimetallic nanoparticles have been widely studied by researchers in many fields. In this paper, core-shell Cu/Au nanoparticles (Cu/Au NPs) were synthesized by a simple and mild one-pot method, and their peroxidase activity was proved by catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) with color change to blue. The change of solution color and absorbance strongly depends on the concentration of H₂O₂, so it can be used for direct detection of H₂O₂ and indirect detection of glucose. What's more, GSH can efficiently react with the hydroxyl radicals from H₂O₂ catalyzed by core-shell Cu/Au NPs to inhibit the production of ox-TMB. Thus, the concentration of GSH can be determined by the decrease in the absorbance of the solution at 652 nm. The results showed that our proposed strategy had good detection range and detection limit for the detection of glucose and GSH. This method has been used in the detection of practical samples and has great application potential in environmental monitoring and clinical diagnosis.

Fluorescent-based nanosensors for selective detection of a wide range of biological macromolecules: A comprehensive review

Thanks to their unique attributes, such as good sensitivity, selectivity, high surface-to-volume ratio, and versatile optical and electronic properties, fluorescent-based bioprobes have been used to create highly sensitive nanobiosensors to detect various biological and chemical agents. These sensors are superior to other analytical instrumentation techniques like gas chromatography, high-performance liquid chromatography, and capillary electrophoresis for being biodegradable, eco-friendly, and more economical, operational, and cost-effective. Moreover, several reports have also highlighted their application in the early detection of biomarkers associated with drug-induced organ damage such as liver, kidney, or lungs. In the present work, we comprehensively overviewed the electrochemical sensors that employ nanomaterials (nanoparticles/colloids or quantum dots, carbon dots, or nanoscaled metal-organic frameworks, etc.) to detect a variety of biological macromolecules based on fluorescent emission spectra. In addition, the most important mechanisms and methods to sense amino acids, protein, peptides, enzymes, carbohydrates, neurotransmitters, nucleic acids, vitamins, ions, metals, and electrolytes, blood gases, drugs (i.e., anti-inflammatory agents and antibiotics), toxins, alkaloids, antioxidants, cancer biomarkers, urinary metabolites (i.e., urea, uric acid, and creatinine), and pathogenic microorganisms were outlined and compared in terms of their selectivity and sensitivity. Altogether, the small dimensions and capability of these nanosensors for sensitive, label-free, real-time sensing of chemical, biological, and pharmaceutical agents could be used in array-based screening and in-vitro or in-vivo diagnostics. Although fluorescent nanoprobes are widely applied in determining biological macromolecules, unfortunately, they present many challenges and limitations. Efforts must be made to minimize such limitations in utilizing such nanobiosensors with an emphasis on their commercial developments. We believe that the current review can foster the wider incorporation of nanomedicine and will be of particular interest to researchers working on fluorescence technology, material chemistry, coordination polymers, and related research areas.

Synthesis of a Novel Electrochemical Probe for the Sensitive and Selective Detection of Biothiols and Its Clinical Applications

The ability to estimate and quantify biothiols in biological fluids is very significant for attaining a detailed understanding of biothiols-related pathological diseases. Most of the developed methods for biothiols detection are not suitable for this purpose owing to their low sensitivity, poor selectivity, and long experimental procedures. In this study, a novel and simple structure electrochemical probe has been synthesized for the first time for the selective determination of biothiols. The developed probe is based on using 2,4-dinitrobenzenesulfonyl moiety (DNBS) as a selective recognition moiety for biothiols. The electrochemical probe was successfully fabricated through a facile one-step reaction between 2,4-dinitrobenzenesulfonyl chloride (DNBS-Cl) and p-aminophenol. The successful synthesis of the probe was confirmed by using different characterization techniques such as an NMR spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy, and mass spectrometry. Biothiols can selectively cleave the DNBS moiety through an aromatic nucleophilic substitution (ANS) reaction within 10 min to release p-aminophenol, which is a highly electrochemical active molecule that can be selectively detected easily by cyclic voltammetry at low potential. The probe has been employed for the quantification of cysteine, glutathione, and homocysteine with a LOD of 1.50, 3.48, and 4.67 μM, respectively. Excellent recoveries have been achieved in the range of 95.44-98.71% for the determination of the total biothiols in the human plasma sample.

A Yellow Fluorescence Probe for the Detection of Oxidized Glutathione and Biological Imaging

It is well-known that the ratio of reduced l-glutathione (GSH) to oxidized l-glutathione (GSSG) is a vital biomarker for monitoring overall cellular health, thus detecting the intracellular concentration of glutathione is of great significance. Recently, an increasing number of reports have published various methods for GSH detection, but studies on the detection of GSSG are still rare. Here, we report a kind of new yellow fluorescent carbon dots (CDs) for the detection of GSSG through a fluorescence "off-on" process. Because the surface is rich in amino groups, the CDs show a positive potential. When the concentration of GSSG was continuously increased, the CDs' fluorescence dropped sharply, while the fluorescence gradually recovered after the addition of sodium sulfide. The phenomenon of fluorescence quenching is linear with the concentration of the quencher (GSSG)(0-200 μM), and 0.18 μM is calculated as the detection limit. More interestingly, as a fluorescent probe, the CDs can be further used for fluorescence imaging in living cells and zebrafish.

Graphitic-phase C3N4 nanosheets combined with MnO2 nanosheets for sensitive fluorescence quenching detection of organophosphorus pesticides

In this study, we have developed a sensitive approach to measure organophosphorus pesticides (OPs) using graphitic-phase C₃N₄ nanosheets (g-C₃N₄) combined with a nanomaterial-based quencher, MnO₂ nanosheets (MnO₂ NS). Since MnO₂ NS can quench the fluorescence of g-C₃N₄ via the inner-filter effect (IFE), enzymatic hydrolysate (thiocholine, TCh) can efficiently trigger the decomposition of MnO₂ nanosheets in the presence of acetylcholinesterase (AChE) and acetylthiocholine (ATCh), resulting in the fluorescence recovery of g-C₃N₄. OPs, as inhibitors to AChE activity, can prevent the generation of TCh and decomposition of MnO₂ nanosheets while exhibiting fluorescence quenching. Therefore, the AChE-ATCh-MnO₂-g-C₃N₄ system can be utilized to quantitatively detect OPs based on g-C₃N₄ fluorescence. Under optimal conditions, the linear ranges for the determination of parathion-methyl (PM) and 2,2-dichlorovinyl dimethyl phosphate (DDVP) were found to be 0.1-2.1 ng/mL and 0.5-16 ng/mL, respectively, with limits of detection of 0.069 ng/mL and 0.20 ng/mL, respectively. The advantages of this assay are user-friendliness, ease of use, and cost effectiveness compared to other more sophisticated analytical instruments.

Single-Atom Fe-Anchored Nano-Diamond With Enhanced Dual-Enzyme Mimicking Performance for H2O2 and Glutathione Detection

Glutathione (GSH) is an important antioxidant and free radical scavenger that converts harmful toxins into harmless substances and excretes them out of the body. In the present study, we successfully prepared single-atom iron oxide-nanoparticle (Fe-NP)-modified nanodiamonds (NDs) named Fe-NDs via a one-pot in situ reduction method. This nanozyme functionally mimics two major enzymes, namely, peroxidase and oxidase. Accordingly, a colorimetric sensing platform was designed to detect hydrogen peroxide (H₂O₂) and GSH. Owing to their peroxidase-like activity, Fe-NDs can oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue with sufficient linearity at H₂O₂ concentrations of 1-60 μM and with a detection limit of 0.3 μM. Furthermore, using different concentrations of GSH, oxidized TMB can be reduced to TMB, and the color change from blue to nearly colorless can be observed by the naked eye (linear range, 1-25 μM; detection limit, 0.072 μM). The established colorimetric method based on oxidase-like activity can be successfully used to detect reduced GSH in tablets and injections with good selectivity and high sensitivity. The results of this study exhibited reliable consistency with the detection results obtained using high-performance liquid chromatography (HPLC). Therefore, the Fe-NDs colorimetric sensor designed in this study offers adequate accuracy and sensitivity.

Hierarchical flower-like manganese oxide/polystyrene with enhanced oxidase-mimicking performance for sensitive colorimetric detection of glutathione

Glutathione (GSH) is an important antioxidant and free radical scavenger that converts harmful toxins into harmless substances and excretes them out of the body. In this paper, 3D hierarchical flower-like nanozyme named MnO₂/PS (polystyrene) was successfully prepared by template method for the first time. After the systematical studies, MnO₂/PS nanozyme was evaluated to possess favorable oxidase activity and direct 3,3',5,5'-tetramethylbenzidine (TMB) catalytic ability in the near-neutral environment at room temperature. With the addition of different concentrations of GSH, oxidized TMB can be reduced to TMB with the whole process from blue to nearly colorless be observed by naked eyes. In addition, there is a good linear relationship in the range 1-50 μM and a detection limit of 0.08 μM. The method proposed can be successfully applied to the detection of reduced GSH in tablets and injections with good selectivity and high sensitivity. The analysis results exhibited good consistency with the results obtained by HPLC.

Target-induced inner-filter effect-based ratiometric sensing platform by fluorescence modulation of persistent luminescent nanoparticles and 2, 3-diaminophenazine

A ratiometric fluorescence sensing platform with smartphone was designed for highly sensitive detection of glutathione (GSH), ascorbic acid (AA), and alkaline phosphatase (ALP) activity by modulation the inner filter effect...

A FeS2NPs-Luminol-MnO2NSs system based on chemiluminescence resonance energy transfer platform for sensing glutathione

In this work, ferrous disulfide nanoparticles (FeS₂NPs) with oxidase properties were synthesized, and a FeS₂NPs-Luminol-MnO₂ nanosheets (MnO₂NSs) chemiluminescence resonance energy transfer (CRET) system was successfully established. Because of reaction with MnO₂NSs, glutathione (GSH) can inhibit CRET between Luminol and MnO₂NSs and recover the luminescence intensity of FeS₂NPs-Luminol. Consequently, we developed a GSH sensor based on this chemiluminescence resonance energy transfer (CRET) system. Under optimal conditions, the FeS₂NPs-Luminol-MnO₂NSs sensing system showed very sensitive response to GSH in the range of 1 μM-500 μM. The limit of detection of GSH reached as low as 0.15 μM. Finally, the sensor was successfully used for the detection of GSH in serum.

Development of a NIR fluorescent probe for the detection of intracellular cysteine and glutathione and the monitoring of the drug resistance

Intracellular cysteine and glutathione was deemed as the most important reductants in the cell and played significant roles in the cellular homeostasis and redox adjustment. Here we developed a NIR fluorescent probe (HI) to detect and report the intracellular cysteine and glutathione, and monitor the development of the drug resistance of tumor. HI with both excited wavelength and emitting wavelength located within near infrared area showed no fluorescence in the normal physiological environment. However, when HI responded to cysteine and glutathione, strong NIR fluorescence could be turned on, which was linear dependent to the cysteine concentrations and the limited of detection was 0.18 μM. The response between HI and cysteine/glutathione demonstrated high specificity and no other amino acids showed influence or competition. The HPLC identification of the recognition results confirmed the response of acryloyloxy on the HI and active sulfhydryl on the cysteine/glutathione. DFT calculation of the HOMO and LUMO energy before and after response revealed the intramolecular charge transfer mechanism that induced the generation of the fluorescence. When HI was incubated with PATU-8988 and PATU-8988/Fu cell, the intracellular cysteine and glutathione could be clearly imaged and monitored by the enhanced fluorescence. Meanwhile, when HI was applied to the tumor-bearing mice, the drug resistance of tumor could be monitored and reported.

Disclosing the Origin of Transition Metal Oxides as Peroxidase (and Catalase) Mimetics

Since Fe3O4 was reported to mimic horseradish peroxidase (HRP) with comparable activity (2007), countless peroxidase nanozymes have been developed for a wide range of applications from biological detection assays to disease diagnosis and biomedicine development. However, researchers have recently argued that Fe3O4 has no peroxidase activity because surface Fe(III) cannot oxidize tetramethylbenzidine (TMB) in the absence of H2O2 (cf. HRP). This motivated us to investigate the origin of transition metal oxides as peroxidase mimetics. The redox between their surface Mn+ (oxidation) and H2O2 (reduction) was found to be the key step generating OH radicals, which oxidize not only TMB for color change but other H2O2 to produce HO2 radicals for Mn+ regeneration. This mechanism involving free OH and HO2 radicals is distinct from that of HRP with a radical retained on the Fe-porphyrin ring. Most importantly, it also explains the origin of their catalase-like activity (i.e., the decomposition of H2O2 into H2O and O2). Because the production of OH radicals is the rate-limiting step, the poor activity of Fe3O4 can be attributed to the slow redox of Fe(II) with H2O2, which is two orders of magnitude slower than the most active Cu(I) among common transition metal oxides. We further tested glutathione (GSH) detection on the basis of its peroxidase-like activity to highlight the importance of understanding the mechanism when selecting materials with high performance.

Feasibility Study on Facile and One-step Colorimetric Determination of Glutathione by Exploiting Oxidase-like Activity of Fe3O4-MnO2 Nanocomposites

A facile and one-step colorimetric assay is described for the determination of glutathione (GSH). It is based on the use of manganese dioxide-decorated magnetic (Fe₃O₄@MnO₂) nanocomposite that was prepared by an in-situ redox reaction. It exhibits oxidase-mimicking activity and can catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) without H₂O₂to form a blue colored product (oxTMB) with an absorption maximum at 651 nm. Once GSH is introduced, the component of MnO₂ can be rapidly reduced to Mn²⁺ ions, which leads to inhibit the formation of oxTMB. Based on these findings, a one-step colorimetric assay was developed for the detection GSH in the range of 0.2 to 25 μM with a low detection limit of 0.2 μM without using any procedures of separation and washing. Importantly, the proposed approach is also used to accurately evaluate the intracellular GSH levels. In our perception, the assay is rapid, sensitive and specific.

An ultrasensitive chemiluminescent biosensor for tracing glutathione in human serum using BSA@AuNCs as a peroxidase-mimetic nanozyme on a luminol/artesunate system

In this work, a nanosensor chemiluminescent (CL) probe for sensing glutathione (GSH) was developed, for the first time, based on its inhibition of the intrinsic peroxidase-mimetic effect of BSA@AuNCs. The endoperoxide linkage of artesunate could be hydrolyzed by BSA@AuNCs resulting in the release of reactive oxygen species (ROS), and the consequent generation of strong CL emission. By virtue of the strong covalent interactions of -S⋯Au-, GSH could greatly suppress the peroxidase-mimetic effect of BSA@AuNCs, leading to a drastic CL quenching. The CL quenching efficiency increased proportionally to the logarithm of GSH concentration through the linearity range of 50.0-5000.0 nM with a limit of detection of 5.2 nM. This CL-based strategy for GSH tracing demonstrated the advantages of ultrasensitivity, high selectivity and simplicity. This strategy was successfully utilized to measure GSH levels in human serum with reasonable recovery results of 98.71%, 103.18%, and 101.68%, suggesting that this turn-off CL sensor is a promising candidate for GSH in biological and clinical samples.

Ratiometric fluorescence and smartphone dual-mode detection of glutathione using carbon dots coupled with Ag+-triggered oxidation of o-phenylenediamine

Developing ratiometric fluorescence and smartphone dual-mode bioanalysis methods is important but challenging. A ratiometric fluorescence method for determining glutathione (GSH) using carbon dots (CDs) and Ag⁺-triggered o-phenylenediamine (OPD) oxidation is described here. Ag⁺oxidizes OPD to give 2,3-diaminophenazine (oxOPD), which effectively quenches CD fluorescence at 436 nm through the inner filter effect and causes a new emission peak at 561 nm. GSH chelates with Ag⁺and prevents the Ag⁺oxidizing OPD and therefore effectively preserves CD emission at 436 nm (blue) and allows only weak oxOPD fluorescence at 561 nm (orange) to occur. The oxOPD to CD fluorescence intensity ratio decreased linearly as the GSH concentration increased in the range 0-150 nM, and the detection limit was 15 nM. The ratiometric fluorescence probe lit with an ultraviolet lamp clearly changed color from orange to blue as the GSH concentration increased. An image was acquired using a smartphone camera and converted into digital values. The blue and red channel ratio was calculated and used to quantify GSH. The method therefore allows dual-mode detection of GSH.

Highly sensitive and selective detection and intracellular imaging of glutathione using MnO2 nanosheets assisted enhanced fluorescence of gold nanoclusters

Glutathione (GSH) plays a critical role in biological defense system and is associated with numerous human pathologies. However, it still remains a challenge for fluorescent detection of GSH over cysteine (Cys) and homocysteine (Hcy) because of their similar structures. In this work, MnO₂ nanosheets can efficiently quench the fluorescence of gold nanoclusters (Met-AuNCs) prepared by blending methionine and HAuCl₄ owing to their superior absorption capability. However, GSH can reduce MnO₂ nanosheets into Mn²⁺ which leads to the fluorescence recovery of Met-AuNCs. More intriguingly, GSH can dramatically and selectively enhance the fluorescence intensity of Met-AuNCs. Hence, a low background, ultrasensitive fluorescent detection of GSH was obtained with a detection limit of 68 nM. Moreover, the assay has been successfully used for GSH detection in human serum samples and cellular imaging with high selectivity over Cys and Hcy.

Naturally Occurring Exopolysaccharide Nanoparticles: Formation Process and Their Application in Glutathione Detection

Naturally occurring nanoscale exopolysaccharide (EPS) has attracted much attention in recent years. In this research, we obtained a new kind of naturally occurring spherical EPS nanoparticles (EPS-R503) from Lactobacillus plantarum R503. The secretion, self-assembly process, morphological structure, and surface characteristics of the as-prepared nanoparticles were comprehensively revealed with transmission electron microscopy (TEM) and atomic force microscope (AFM) for the first time. It was found that the EPS-R503 nanoparticles consist of negatively charged heteropolysaccharide composed of mannose, glucose, galactose, and glucuronide with several functional groups including -OH, -COOH, and -NH₂. When different solvents were used to treat the EPS-R503 nanoparticles, the morphological structure and surface properties could be changed or manipulated. The forming mechanism of EPS-R503 was elucidated based on the aggregation processes from a fundamental point of view. Furthermore, EPS-R503 can serve as reducing and stabilizing agents for the biosynthesis of manganese dioxide nanosheets (MnO₂ NSs), leading to EPS-MnO₂ nanocomposite. The as-prepared nanocomposites can absorb fluorescein (FL) to form EPS-MnO₂-FL, which can be used to detect glutathione (GSH) with a low limit of detection (0.16 μM) and a wide detection range from 0.05 to 4 mM. The excellent biocompatibility of EPS-MnO₂-FL endows the feasibility of in vivo detection of GSH as well. Overall, the findings from this work not only benefit the exploitation of naturally occurring EPS nanomaterials but also provide a novel strategy for the green synthesis of metal-containing nanosheets for GSH detection.

Investigating the Effect of Substrate Stiffness on the Redox State of Cardiac Fibroblasts Using Scanning Electrochemical Microscopy

Cardiac fibrosis, in which cardiac fibroblasts differentiate into myofibroblasts, leads to oversecretion of the extracellular matrix, results in increased stiffness, and facilitates disequilibrium of cellular redox state, further leading to oxidative stress and various degrees of cell death. However, the relationship between the matrix stiffness and the redox status of cardiac fibroblasts remains unclear. In this work, we constructed an in vitro cardiac fibrosis model by culturing cardiac fibroblasts on polyacrylamide gels with tunable stiffness and characterized the differentiation of cardiac fibroblasts to myofibroblasts by immunofluorescence staining of α-smooth muscle actin. We then applied scanning electrochemical microscopy (SECM) with a depth scan mode to in situ and quantitatively assess the redox status by monitoring the glutathione (GSH) efflux rate (k) through the redox reaction between GSH (a typical indicator of cellular redox level) released from cardiac fibroblasts and SECM probe-oxidized ferrocenecarboxylic acid ([FcCOOH]⁺). The SECM results demonstrate that the GSH efflux from the cardiac fibroblasts decreased with increasing substrate stiffness (i.e., mimicking the increased fibrosis degree), indicating that a more oxidizing microenvironment facilitates the cell differentiation and GSH may serve as a biomarker to predict the degree of cardiac fibrosis. This work provides an SECM approach to quantify the redox state of cardiac fibroblasts by recording the GSH efflux rate. In addition, the newly established relationship between the redox balance and the substrate stiffness would help to better understand the redox state of cardiac fibroblasts during cardiac fibrosis.

Turn-on fluorescent glutathione detection based on lucigenin and MnO2 nanosheets

In this work, a glutathione (GSH) sensing nano-platform using lucigenin as a fluorescent probe in the presence of MnO2 nanosheets was reported for the first time. Unlike the earlier fluorescent detection systems based on MnO2 nanosheets, which depend on Förster resonance energy transfer (FRET) or the dynamic quenching effect (DQE), the mechanism of the quenching process of MnO2 nanosheets on lucigenin fluorescence was attributed mainly to a static quenching effect (SQE) with a minor contribution of the inner filter effect (IFE). A double exponential fluorescence decay of lucigenin was obtained in various MnO2 nanosheet concentrations as a result of their SQE and IFE. Based on this phenomenon and taking advantage of the redox reaction between GSH and MnO2 nanosheets, we have developed a switch-on sensitive fluorescent method for GSH via the recovery of the MnO2 nanosheet-quenched fluorescence of lucigenin. A good linearity range of 1.0-150.0 μM with a low limit of detection (S/N = 3) of 180.0 nM was achieved, revealing the higher sensitivity for GSH determination in comparison with the previously reported MnO2 nanosheet-based turn-on fluorescent methods. The developed fluorescent nano-platform exhibits excellent selectivity with successful application for GSH detection in human serum plasma, indicating its good practicability for GSH sensing in biological and clinical applications.

Anti-metastasis and anti-proliferation effect of mitochondria-accumulating ruthenium(II) complexes via redox homeostasis disturbance and energy depletion

The antiproliferative activity of three cyclometalated Ru(II) complexes with the formula [Ru(bpy)₂L]PF₆, where bpy = 2,2'-bipyridine, Ru1: L1 = phenanthro[4,5-fgh]quinoxaline; Ru2: L2 = benzo[f]naphtho[2,1-h]quinoxaline; and Ru3: L3 = phenanthro[9,10-b]pyrazine, have been synthesized and characterized. The lipophilicity of the three Ru(II) complexes was modulated by the alteration of the planarity in the ligands of the complexes. With appropriate lipophilicity, Ru1-Ru3 exhibited mitochondrial accumulating property and cytotoxic activity against a spectrum of cancer cell lines. The underlying mechanism study indicated that these Ru(II) complexes can selectively accumulate in mitochondria and disrupt physiological processes, including the redox balance and energy generation in cancer cells. Elevation of iron content in triple-negative breast cancer (MDA-MB-231 cells) was observed after treatment with Ru(II) complexes, which may contribute to the production of reactive oxygen species (ROS) via Fenton reaction chemistry. Besides, the Ru(II) complexes decreased the intracellular glutathione (GSH) in cancer cells, leading to the failure in the cells to combat oxidative damage. Both of the mentioned processes contribute to the high oxidative stress and eventually lead to cancer cell death. On the other hand, Ru1-Ru3 significantly induced the depletion of adenosine triphosphate (ATP), causing disturbance of energy generation. Moreover, the results of wound-healing assay and transwell invasion assay, as well as the tube formation assay indicated the anti-migration and anti-angiogenesis properties of Ru1-Ru3. Our study demonstrated that these Ru(II) complexes are promising chemotherapeutic agents with oxidative stress induction and energy generation disturbance.

Development of manganese dioxide-based nanoprobes for fluorescence detection and imaging of glutathione

A manganese dioxide-based nanoprobe is developed for fluorescence detection and imaging of glutathione (GSH) in yeast cells and onion tissues.

Universal Platform for Ratiometric Sensing Based on Catalytically Induced Inner-Filter Effect by Cu2

Integrating two kinds of fluorescent probes in one system to develop a ratiometric sensing platform is of prime importance for achieving an accurate assay. Inspired by the efficient overlapped spectrum of 2-aminoterephthalic acid (PTA-NH₂) and 2,3-diaminophenazine (DAP), a new sensitive ratiometric fluorescent sensor has been developed for Cu²⁺ on the basis of in situ converting o-phenylenediamine (OPD) into DAP through the catalysis of Cu²⁺. Here, the presence of Cu²⁺ induced the emission of DAP, which acted as an energy acceptor to inhibit the emission of PTA-NH₂. This dual-emission reverse change ratiometric profile based on the inner-filter effect improved sensitivity and accuracy, and the highly sensitive determination of Cu²⁺ with a detection limit of 1.7 nmol·L^-1 was obtained. The proposed sensing platform displayed the wide range of detection of Cu²⁺ from 5 to 200 nmol·L^-1 by modulating the reaction time between Cu²⁺ and OPD. Moreover, based on the specific interaction between glutathione (GSH) and Cu²⁺, this fluorescent sensor showed high response toward GSH in a range of 0.5-80 μmol·L^-1 with a detection limit of 0.16 μmol·L^-1. The successful construction of this simple ratiometric sensing platform without the participation of enzymes provides a new route for the detection of small biological molecules that are closely related to human health.

A sensitive "Switch-on" phosphorescent probe for ferrous iron quantification in drug and In vitro imaging of living cells

Iron plays an important role in various physiological processes. However, the detailed biological functions of iron have not been sufficiently explored because of a lack of effective methods to monitoring iron, especially the labile ferrous ion (Fe²⁺). In the current study, a novel turn-on phosphorescent probe for Fe²⁺ quantification and visualization has been proposed based on the hybrid nanocomposite of manganese dioxide and gemini iridium complex (MnO₂-GM-Ir). The surfactant-like GM-Ir with positive charges was beneficial to combine with the negatively charged manganese dioxide (MnO₂) nanosheets, and thus endowing the MnO₂-GM-Ir nanocomposite excellent dispersion ability in the water as well as efficiently avoiding the interference to the detection caused by the agglomeration of nanocomposite. Phosphorescence of GM-Ir was effectively quenched by MnO₂ nanosheets through fluorescence resonance energy transfer (FRET) and the inner filter effect (IFE), while the phosphorescence could be significantly recovered in the presence of Fe²⁺via a selective Fe²⁺-mediated reduction of MnO₂ nanosheets, indicating a highly-specific selectivity towards Fe²⁺ with a low detection limit (80 nM). The drug test assay and in vitro imaging studies further proved that the MnO₂-GM-Ir nanocomposite could be employed as a promising probe for the quantitative detection of exogenous Fe²⁺ in drug and in vitro imaging of living cells.

Dual enzyme-like activity of iridium nanoparticles and their applications for the detection of glucose and glutathione

Here we show that iridium nanoparticles (Ir NPs) functionally mimic peroxidase and catalase. The possible mechanism of intrinsic dual-enzyme mimetic activity of Ir NPs was investigated. Based on the excellent peroxidase-like activity of Ir NPs, a new colorimetric detection method for reduced glutathione (GSH) and glucose was proposed.