Construction of Membraneless and Multicompartmentalized Coacervate Protocells Controlling a Cell Metabolism-like Cascade Reaction

In recent years, there has been growing attention to designing synthetic protocells, capable of mimicking micrometric and multicompartmental structures and highly complex physicochemical and biological processes with spatiotemporal control. Controlling metabolism-like cascade reactions in coacervate protocells is still challenging since signal transduction has to be involved in sequential and parallelized actions mediated by a pH change. Herein, we report the hierarchical construction of membraneless and multicompartmentalized protocells composed of (i) a cytosol-like scaffold based on complex coacervate droplets stable under flow conditions, (ii) enzyme-active artificial organelles and a substrate nanoreservoir capable of triggering a cascade reaction between them in response to a pH increase, and (iii) a signal transduction component based on the urease enzyme capable of the conversion of an exogenous biological fuel (urea) into an endogenous signal (ammonia and pH increase). Overall, this strategy allows a synergistic communication between their components within the membraneless and multicompartment protocells and, thus, metabolism-like enzymatic cascade reactions. This signal communication is transmitted through a scaffold protocell from an "inactive state" (nonfluorescent protocell) to an "active state" (fluorescent protocell capable of consuming stored metabolites).

A quality by design approach for the synthesis of palmitoyl-L-carnitine-loaded nanoemulsions as drug delivery systems

Nanoemulsions (NE) are lipid nanocarriers that can efficiently load hydrophobic active compounds, like palmitoyl-L-carnitine (pC), used here as model molecule. The use of design of experiments (DoE) approach is a useful tool to develop NEs with optimized properties, requiring less experiments compared to trial-and-error approach. In this work, NE were prepared by the solvent injection technique and DoE using a two-level fractional factorial design (FFD) as model was implemented for designing pC-loaded NE. NEs were fully characterized by a combination of techniques, studying its stability, scalability, pC entrapment and loading capacity and biodistribution, which was studied ex-vivo after injection of fluorescent NEs in mice. We selected the optimal composition for NE, named pC-NE_U, after analysis of four variables using DoE. pC-NE_U incorporated pC in a very efficient manner, with high entrapment efficiency (EE) and loading capacity. pC-NE_U did not change its initial colloidal properties stored at 4 °C in water during 120 days, nor in buffers with different pH values (5.3 and 7.4) during 30 days. Moreover, the scalability process did not affect NE properties and stability profile. Finally, biodistribution study showed that pC-NE_U formulation was predominantly concentrated in the liver, with minimal accumulation in spleen, stomach, and kidneys.

Harnessing the power of polyol-based polyesters for biomedical innovations: synthesis, properties, and biodegradation

Polyesters based on polyols have emerged as promising biomaterials for various biomedical applications, such as tissue engineering, drug delivery systems, and regenerative medicine, due to their biocompatibility, biodegradability, and versatile physicochemical properties. This review article provides an overview of the synthesis methods, performance, and biodegradation mechanisms of polyol-based polyesters, highlighting their potential for use in a wide range of biomedical applications. The synthesis techniques, such as simple polycondensation and enzymatic polymerization, allow for the fine-tuning of polyester structure and molecular weight, thereby enabling the tailoring of material properties to specific application requirements. The physicochemical properties of polyol-based polyesters, such as hydrophilicity, crystallinity, and mechanical properties, can be altered by incorporating different polyols. The article highlights the influence of various factors, such as molecular weight, crosslinking density, and degradation medium, on the biodegradation behavior of these materials, and the importance of understanding these factors for controlling degradation rates. Future research directions include the development of novel polyesters with improved properties, optimization of degradation rates, and exploration of advanced processing techniques for fabricating scaffolds and drug delivery systems. Overall, polyol-based polyesters hold significant potential in the field of biomedical applications, paving the way for groundbreaking advancements and innovative solutions that could revolutionize patient care and treatment outcomes.

Synthesis and Characterization of Curcumin-Loaded Nanoparticles of Poly(Glycerol Sebacate): A Novel Highly Stable Anticancer System

The research for alternative administration methods for anticancer drugs, towards enhanced effectiveness and selectivity, represents a major challenge for the scientific community. In the last decade, polymeric nanostructured delivery systems represented a promising alternative to conventional drug administration since they ensure secure transport to the selected target, providing active compounds protection against elimination, while minimizing drug toxicity to non-target cells. In the present research, poly(glycerol sebacate), a biocompatible polymer, was synthesized and then nanostructured to allow curcumin encapsulation, a naturally occurring polyphenolic phytochemical isolated from the powdered rhizome of Curcuma longa L. Curcumin was selected as an anticancer agent in virtue of its strong chemotherapeutic activity against different cancer types combined with good cytocompatibility within healthy cells. Despite its strong and fascinating biological activity, its possible exploitation as a novel chemotherapeutic has been hampered by its low water solubility, which results in poor absorption and low bioavailability upon oral administration. Hence, its encapsulation within nanoparticles may overcome such issues. Nanoparticles obtained through nanoprecipitation, an easy and scalable technique, were characterized in terms of size and stability over time using dynamic light scattering and transmission electron microscopy, confirming their nanosized dimensions and spherical shape. Finally, biological investigation demonstrated an enhanced cytotoxic effect of curcumin-loaded PGS-NPs on human cervical cancer cells compared to free curcumin.

Solvent-Free Production by Extrusion of Bio-Based Poly(glycerol-co-diacids) Sheets for the Development of Biocompatible and Electroconductive Elastomer Composites

Faced with growing global demand for new potent, bio-based, biocompatible elastomers, the present study reports the solvent-free production of 13 pure and derived poly(glycerol-co-diacid) composite sheets exclusively using itaconic acid, sebacic acid, and 2,5-furandicarboxylic acid (FDCA) with glycerol. Herein, modified melt polycondensation and Co(II)-catalyzed polytransesterification were employed to produce all exploitable prepolymers, enabling the easy and rapid manufacturing of elastomer sheets by extrusion. Most of our samples were loaded with 4 wt% of various additives such as natural polysaccharides, synthetic polymers, and/or 25 wt% sodium chloride as porogen agents. The removal of unreacted monomers and acidic short oligomers was carried out by means of washing with NaHCO3 aqueous solution, and pH monitoring was conducted until efficient sheet surface neutralization. For each sheet, their surface morphologies were observed by Field-emission microscopy, and DSC was used to confirm their amorphous nature and the impact of the introduction of every additive. The chemical constitution of the materials was monitored by FTIR. Then, cytotoxicity tests were performed for six of our most promising candidates. Finally, we achieved the production of two different types of extrusion-made PGS elastomers loaded with 10 wt% PANI particulates and 4 wt% microcrystalline cellulose for adding potential electroconductivity and stability to the material, respectively. In a preliminary experiment, we showed the effectiveness of these materials as performant, time-dependent electric pH sensors when immersed in a persistent HCl atmosphere.

Optimisation of Glycerol and Itaconic Anhydride Polycondensation

Glycerol polyesters have recently become objects of interest in tissue engineering. Barely known so far is poly(glycerol itaconate) (PGItc), a biocompatible, biodegradable polyester. Due to the presence of a C=C electron-acceptor moiety, it is possible to post-modify the product by Michael additions to change the properties of PGItc. Thus, using PGItc as one of the elements of cellular scaffold crosslinked in situ for bone tissue regeneration seems to be a very attractive yet unexplored solution. This work aims to optimize the synthesis of PGItc to obtain derivatives with a double bond in the side chain with the highest conversion rates. The experiments were performed with itaconic anhydride and glycerol using mathematical planning of experiments according to the Box-Behnken plan without solvent and catalyst. The input variables of the process were the ratio of the OH/COOH, temperature, and reaction time. The optimised output variables were: the degree of esterification (EDtitr), the degree of esterification calculated from the analysis of 1H NMR spectra (EDNMR), and the degree of itaconic anhydride conversion-calculation based on 13C NMR spectra (%X13CNMR). In each of statistical models, the significance of the changed synthesis parameters was determined. Optimal conditions are when OH/COOH ratio is equal to 1.5, temperature is 140 °C and time of reaction is 5 h. The higher OH/COOH ratio, temperature and longer the experiment time, the higher the value of the degree of esterification and the degree of anhydride conversion.

Novel Magnetic Elastic Phase-Change Nanodroplets as Dual Mode Contrast Agent for Ultrasound and Magnetic Resonance Imaging

Recently, dual-mode imaging systems merging magnetic resonance imaging (MRI) and ultrasound (US) have been developed. Designing a dual-mode contrast agent is complex due to different mechanisms of enhancement. Herein, we describe novel phase change nanodroplets (PCNDs) with perfluoropentane encapsulated in a pre-polyglycerol sebacate (pre-PGS) shell loaded with polyethylene glycol (PEG)-coated iron oxide nanoparticles as having a dual-mode contrast agent effect. Iron oxide nanoparticles were prepared via the chemical co-precipitation method and PCNDs were prepared via the solvent displacement technique. PCNDs showed excellent enhancement in the in vitro US much more than Sonovue^® microbubbles. Furthermore, they caused a susceptibility effect resulting in a reduction of signal intensity on MRI. An increase in the concentration of nanoparticles caused an increase in the MR contrast effect but a reduction in US intensity. The concentration of nanoparticles in a shell of PCNDs was optimized to obtain a dual-mode contrast effect. Biocompatibility, hemocompatibility, and immunogenicity assays showed that PCNDs were safe and non-immunogenic. Another finding was the dual-mode potential of unloaded PCNDs as T1 MR and US contrast agents. Results suggest the excellent potential of these PCNDs for use as dual-mode contrast agents for both MRI and US.

Modulating the Properties of Poly(glycerol sebacate)-Based Polyurethane Hydrogels Using an Organoclay

Elastomeric hydrogels are promising in soft tissue applications due to their biomimetic mechanical and physical behaviors. In this study, we design and synthesize a poly(glycerol sebacate)-based polyurethane-clay nanocomposite hydrogel system with controllable mechanical, swelling, drug release, and biodegradation behaviors. The polymer-clay nanocomposites are synthesized by in situ polymerization in the presence of a solvent, which facilitates the dispersion of clay within the polymer matrix and their bonding. The nanocomposite hydrogels exhibit higher water swelling ratios in comparison to the neat polymer. The fully swollen hydrogels are capable of enduring complex mechanical deformations such as stretching and knotting, while the tensile moduli of the hydrogels mimic various soft tissues in human body. The mechanical behavior of hydrogels is significantly enhanced by the addition of no more than 3 phr clay, showing higher stiffness, strength, ductility, and toughness. The drug loading and release behavior of the hydrogels is investigated with three model drugs, showing selective drug loading capacity and sustained release, based on the Coulombic interaction between the clay and drug molecules. Biodegradation tests under a simulated body condition reveal a highly tunable degradation rate by the clay content in the nanocomposite hydrogels. Good cytocompatibility by the cell metabolic assay with mouse fibroblasts in vitro is also demonstrated. Finally, three-dimensional microporous foam is manufactured as a proof-of-concept study.

Doxorubicin-loaded natural daptomycin micelles with enhanced targeting and anti-tumor effect in vivo

Development of a simple method to enhance targeting and anti-tumor effect of the chemotherapeutic agents in vivo is a major problem. Amphipathic and natural daptomycin is biocompatible antibacterial polypeptide used in clinical practice. Herein, doxorubicin (DOX) was stabilized by zwitterionic daptomycin (Dap) micelles in aqueous solution to form a zwitterionic nanodrug (Dap-DOX micelles). The hydrodynamic size and zeta potential of Dap-DOX micelles were 85 nm and -10 mV, respectively. The study on the controlled release showed that more DOX molecules were released from Dap-DOX micelles at acidic condition of tumor tissue than that at neutral condition of normal tissue which was due to pH responsiveness of Dap-DOX micelles. Dap-DOX micelles exhibited good stability in fibrinogen solution. Moreover, MTT studies showed that Dap-DOX micelles had higher cytotoxicity than free DOX. Notably, the results of flow cytometry indicated that the average fluorescence intensity of Dap-DOX micelle-treated cells was higher than that of free DOX-treated cells, and acidic conditions were more favorable for Dap-DOX micelles than normal pH in cell uptake assay. More importantly, Dap-DOX micelles were biocompatible in vivo based on the changes of weight and blood indexes of mice. Dap-DOX micelles were selectively accumulated at tumor sites in vivo through EPR effect, which reduced the toxicity of free DOX and achieved excellent tumor inhibition effect. The tumor inhibition rate of Dap-DOX micelles reached 96%. Dap-DOX micelles also effectively inhibited the growth of bacterial. Taken together, Dap-based drug delivery systems are promising and effective in cancer therapy.

5FU encapsulated polyglycerol sebacate nanoparticles as anti-cancer drug carriers

The majority of anti-cancer drugs fail to reach clinical trials due to their low water solubility. A biocompatible drug delivery system that encapsulates and efficiently delivers hydrophobic drugs to the target site is the need of the hour. This study addresses the issue by focusing on a polymeric polyglycerol sebacate (PGS) nanoparticles loaded with 5-fluorouracil (5FU), a primary line chemotherapy drug for many types of cancers. The generated nanoparticle (PGS-NP) was biocompatible and had minimal cytotoxicity against the MDA-MB-231 and A549 cell lines, even at a high concentration of 100 μg mL-1. The cell viability post treatment with PGS nanoparticles encapsulated with 5FU (PGS-5FU) decreased to as low as around 40% whereas, in the case of treatment with 5FU, the viability percentage increased. The nanoparticles also showed controlled drug release when encapsulated with 5FU. This striking observation suggested that these nanoparticles can improve the efficacy of drug delivery to tumor sites. Apoptosis assay and caspase-3 activity quantification supported these data wherein PGS-5FU treatment showed almost three times caspase-3 activity as compared to control cells. Additionally, throughout all the experiments, MDA-MB-231 cells were more sensitive to PGS-5FU than A549 cells, indicating that these nanoparticles are ideal for breast cancer treatment. In summary, 5FU encapsulated PGS nanoparticles are a potential drug carrier to deliver 5FU efficiently to cancer cells.

Poly(Glycerol Sebacate) in Biomedical Applications-A Review of the Recent Literature

Poly(glycerol sebacate) (PGS) continues to attract attention for biomedical applications owing to its favorable combination of properties. Conventionally polymerized by a two-step polycondensation of glycerol and sebacic acid, variations of synthesis parameters, reactant concentrations or by specific chemical modifications, PGS materials can be obtained exhibiting a wide range of physicochemical, mechanical, and morphological properties for a variety of applications. PGS has been extensively used in tissue engineering (TE) of cardiovascular, nerve, cartilage, bone and corneal tissues. Applications of PGS based materials in drug delivery systems and wound healing are also well documented. Research and development in the field of PGS continue to progress, involving mainly the synthesis of modified structures using copolymers, hybrid, and composite materials. Moreover, the production of self-healing and electroactive materials has been introduced recently. After almost 20 years of research on PGS, previous publications have outlined its synthesis, modification, properties, and biomedical applications, however, a review paper covering the most recent developments in the field is lacking. The present review thus covers comprehensively literature of the last five years on PGS-based biomaterials and devices focusing on advanced modifications of PGS for applications in medicine and highlighting notable advances of PGS based systems in TE and drug delivery.

Polyglycerol Hyperbranched Polyesters: Synthesis, Properties and Pharmaceutical and Biomedical Applications

In a century when environmental pollution is a major issue, polymers issued from bio-based monomers have gained important interest, as they are expected to be environment-friendly, and biocompatible, with non-toxic degradation products. In parallel, hyperbranched polymers have emerged as an easily accessible alternative to dendrimers with numerous potential applications. Glycerol (Gly) is a natural, low-cost, trifunctional monomer, with a production expected to grow significantly, and thus an excellent candidate for the synthesis of hyperbranched polyesters for pharmaceutical and biomedical applications. In the present article, we review the synthesis, properties, and applications of glycerol polyesters of aliphatic dicarboxylic acids (from succinic to sebacic acids) as well as the copolymers of glycerol or hyperbranched polyglycerol with poly(lactic acid) and poly(ε-caprolactone). Emphasis was given to summarize the synthetic procedures (monomer molar ratio, used catalysts, temperatures, etc.,) and their effect on the molecular weight, solubility, and thermal and mechanical properties of the prepared hyperbranched polymers. Their applications in pharmaceutical technology as drug carries and in biomedical applications focusing on regenerative medicine are highlighted.

Poly(glycerol sebacate) nanoparticles for ocular delivery of sunitinib: physicochemical, cytotoxic and allergic studies

Poly(glycerol sebacate) (PGS) is a new biodegradable polymer with good biocompatibility used in many fields of biomedicine and drug delivery. Sunitinib-loaded PGS/gelatine nanoparticles were prepared by the de-solvation method for retinal delivery and treatment of diabetic retinopathy. The nanoparticles were characterised by Fourier-transform infrared and differential scanning calorimetry. The effects of different formulation variables including drug-to-carrier ratio, gelatine-to-PGS ratio, and glycerine-to-sebacate ratio were assessed on the encapsulation efficiency (EE%), particle size, release efficiency (RE), and zeta potential of the nanoparticles. The in vitro cytotoxicity of PGS/gelatine nanoparticles was studied on L929 cells. Draize test on rabbit eyes was also done to investigate the possible allergic reactions caused by the polymer. Glycerine/sebacic acid was the most effective parameter on the EE and RE. Gelatine-to-PGS ratio had the most considerable effect on the particle size while the RE was more affected by the glycerine/sebacic acid ratio. The optimised formulation (S₁G_0.7D_21.2) exhibited a particle size of 282 nm, 34.6% EE, zeta potential of -8.9 mV, and RE% of about 27.3% for drug over 228 h. The 3-(4,5-dimethylthuazol-2-yl)-2,5-diphenyltetrazolium bromide assay indicated PGS/gelatine nanoparticles were not cytotoxic and sunitinib-loaded nanoparticles were not toxic at concentrations <36 nM.

Molecularly engineered metal-based bioactive soft materials - Neuroactive magnesium ion/polymer hybrids

The development of bioactive soft materials that can guide cell behavior and have biomimetic mechanical properties is an active and challenging topic in regenerative medicine. A common strategy to create a bioactive soft material is the integration of biomacromolecules with polymers. However, limited by their complex structures and sensitivity to temperature and chemicals, it is relatively difficult to maintain the bioactivity of biomacromolecules during their preparation, storage, and application. Here, a new kind of bioactive soft material based on the molecular integration of metal ions and polymers is designed and exemplified by a hybrid of magnesium ion (Mg²⁺) and poly(glycerol-sebacate-maleate) (PGSM-Mg). Mg²⁺ was firmly incorporated into PGSM molecules through a complexation interaction as evidenced by X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). The PGSM matrix provided the soft nature and facile processing of the hybrid, which could serve as an injectable material and be fabricated into elastic porous three-dimensional (3D) scaffolds. The Mg²⁺ immobilized in the PGSM chain conferred neuroactivity to the resultant hybrid. PGSM-Mg exhibited adequate biodegradability and a sustained release of Mg²⁺. PGSM-Mg 3D scaffolds promoted the adhesion and proliferation of Schwann cells (SCs) more effectively than poly(lactic-co-glycolic acid) (PLGA) scaffolds. Furthermore, SCs on PGSM-Mg scaffolds expressed significantly more neural specific genes than those on PLGA, PGS, and PGSM, including nerve growth factor (NGF) and neurotrophic factor-3 (NTF3). All these results indicated that Mg²⁺ immobilized through molecular integration could efficiently regulate the bioactivity of polymers. In view of the wide availability, diverse bioactivity, and high stability of metal ions, the strategy of molecular coupling of metal ions and polymers is expected to be a new general approach to construct bioactive soft materials. STATEMENT OF SIGNIFICANCE: Bioactive soft materials are designed on the basis of the molecular integration of metal ions and polymers. Immobilized metal ions offer a new way to endow bioactivity to polymers. Different from biomolecules such as proteins and genes, metal ions are quite stable and can resist harsh processing conditions. Further, the polymeric matrix provides the soft nature and facile processing of the hybrid. Different from stiff metal-containing inorganic materials, the hybrid is a biomimetic soft material and can be readily processed just like its polymer precursor under mild conditions. In view of the diversity of metal ions and polymers, this strategy is expected to be a new powerful and general approach to construct bioactive soft materials for a wide range of biomedical applications.

A facile approach to fabricate self-assembled magnetic nanotheranostics for drug delivery and imaging

Superparamagnetic iron oxide (SPIO) nanoparticles have been extensively employed for theranostic applications due to their good biocompatibility and excellent magnetic resonance imaging (MRI) properties. However, these particles typically require surface modification due to their hydrophobic surfaces caused by the oil-phase surfactants used in the fabrication and thus, the drug loading on their surface is usually limited. Here, we provided a novel and facile approach to conveniently perform surface modification of SPIO while simultaneously loading a large amount of drug. By synthesizing an amphiphilic irinotecan-based compound with a hydrophobic tail enabling insertion into the SPIO assembly, an excellent SPIO-based theranostic nanomedicine (SPIO@IR) was produced. SPIO@IR not only extensively improved the drug efficacy, but also allowed visualization by MRI in biological systems.