Green Synthesis of a Molecularly Imprinted Polymer Based on a Novel Thiophene-Derivative for Electrochemical Sensing

An environmentally friendly and sustainable approach was adopted to produce a molecularly imprinted polymer (MIP) via electropolymerization, with remarkable electrochemical sensing properties, tested in tyrosine (tyr) detection. The 2,2'-bis(2,2'-bithiophene-5-yl)-3,3'-bithianaphtene (BT2-T4) was chosen as functional monomer and MIP electrosynthesis was carried out via cyclic voltammetry on low-volume (20 μL) screen-printed carbon electrodes (C-SPE) in ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ((BMIM) TFSI). An easy and rapid washing treatment allowed us to obtain the resulting MIP film, directly used for tyr electrochemical detection, carried out amperometrically. The sensor showed a linear response in the concentration range of 15-200 μM, with LOD of 1.04 µM, LOQ of 3.17 μM and good performance in selectivity, stability, and reproducibility. Tyrosine amperometric detection was also carried out in human plasma, resulting in a satisfactory recovery estimation. The work represents the first use of BT2-T4 as a functional monomer for the production of a molecularly imprinted polymer, with a green approach afforded by using a few microliters of a room temperature ionic liquid as an alternative to common organic solvents on screen-printed carbon electrodes, resulting in a valuable system that meets the green chemistry guidelines, which is today an essential criterion in both research and application field.

Highly selective detection of epinephrine by a "turn-off" fluorescent sensor based on N-doped carbon quantum dots

Epinephrine (EP) is a catecholamine hormone with a variety of physiological activities. Monitoring the concentration of EP in drugs, food, biological samples and cosmetics is of great significance for their quality control. Herein, a novel fluorescence sensing method was designed for the high-specificity detection of EP based on N-doped carbon quantum dots (N-CDs). The EP could interact with the fluorescent senor of N-CDs which emits blue fluorescence to produce concentration- dependent fluorescence quenching through the photo-induced electron transfer (PET). The established sensing method has good linearity in the range of 0.5-10 μM with the LOD of 0.15 μM. More importantly, it is highly selective because similar components with phenolic hydroxyl groups or primary amino groups, even norepinephrine (NEP), could not interfere with the detection. This method can provide a low-cost, rapid and simple new way for the detection of EP, and has a good application prospect in point-of-care assay and in situ test.

Selective detection of nitrotyrosine using dual-fluorescent carbon dots

The post-translational modification of amino acid plays a critical role in normal and diseased biological states. Specifically, nitrotyrosine (nTyr) has been linked to diseases, including neurodegeneration, among others. Hence, alternative methods are required for detection and differentiation of nTyr from other structurally similar analogues, such as Tyrosine (Tyr) or phosphotyrosine (pTyr). Herein, the selective detection of nTyr, over other congeners, was achieved by using dual-fluorescent carbon dots (CDs) in buffered solution, artificial saliva, bovine serum albumin and diluted equine serum. The nTyr induced fluorescence quenching of the blue and red emissions of CDs, in the 20-105 μM linear range, and with the limit of detection (LOD) at 34 μM, which was well below the physiological concentration required for detection. The sensor was functional at biological pH values, with optimal quenching efficiency at basic pH. The sensor was highly selective for nTyr even in the presence of common biological interferences (metal cations, organic anions, amino acids, nucleosides and other biologicals). The mechanism of quenching (a combination of static and dynamic) was ascribed to the nonradiative energy transfer, due to electronic overlap between nTyr absorbance and CDs fluorescence emission, and electron transfer from excited CDs state to nTyr as an electron acceptor. The dual-fluorescent CDs represent viable sensors for key biological modifications, and their selectivity and sensitivity may be further improved through tailored chemical synthesis of CDs, such as tunable surface chemistry to promote selective recognition of analyte of interest.

Development of a Selective Assay of Tyrosine and Its Producing and Metabolizing Enzymes Utilizing Pulse-UV Irradiation-Induced Chemiluminescence

A new pulse UV irradiation-induced chemiluminescence (CL) determination method was developed for l-tyrosine using the luminol derivative L-012. The proposed method depends on the formation of reactive oxygen species (ROS) upon pulse UV irradiation of l-tyrosine; then, these ROS react with L-012 producing strong CL. The proposed method showed excellent sensitivity and ultraselectivity toward l-tyrosine. The mechanism of the developed CL method was studied using ROS scavengers, HPLC, and mass spectrometry. The method was linear for l-tyrosine in the range of 0.03-50 μM. Minor changes in the l-tyrosine structure, including hydroxylation, dehydroxylation, phosphorylation, or decarboxylation, were found to lead to a strong decrease in CL. Using the excellent selectivity of the proposed method for l-tyrosine, we have developed a CL assay for measuring alkaline phosphatase activity in the range of 0.02-15 U/L with the limit of detection (LOD) of 4 mU/L using the nonchemiluminescent O-phospho-l-tyrosine as a substrate. Furthermore, the CL reaction was applied for tyrosinase activity assay as this enzyme can convert l-tyrosine to the nonchemiluminescent l-dopa. The decrease in CL is correlated with the tyrosinase activity in the range of 0.025-0.75 U/mL with an LOD of 1.5 mU/mL. Moreover, the tyrosinase activity assay was successfully applied for the determination of IC₅₀ of the tyrosinase inhibitors kojic acid and benzoic acid. Therefore, our novel pulse UV irradiation CL method for the determination of l-tyrosine was not only suitable for the determination of this vital amino acid but also extended to the successful determination of its producing and metabolizing enzymes and their inhibitors.

Smartphone-integrated colorimetric sensor array-based reader system and fluorometric detection of dopamine in male and female geriatric plasma by bluish-green fluorescent carbon quantum dots

A simple, cost-effective system was developed for dopamine (DA) detection using green synthesized 1-6 ​nm honey-based carbon quantum dots (H-CQDs) exhibiting bluish green fluorescence. The H-CQDs exhibited emission at 445 ​nm, with a quantum yield of ∼44%. The H-CQDs were used as a probe for electron transfer based DA detection and changes in H-CQD color in the presence of DA. The H-CQDs were formed with polar functional groups and were highly soluble in aqueous media. In the fluorometric mode, the proposed system demonstrated high specificity toward DA and effective limit of detection (LOD) values of 6, 8.5, and 8 ​nM in deionized (DI) water, male geriatric plasma, and female geriatric plasma, respectively, in the linear range 100 ​nM-1000 μM. In the colorimetric mode, the color changed within 5 ​min, and the LOD was 163 ​μM. A colorimetric sensor array system was used to precisely detect DA with a smartphone-integrated platform using an in house built imaging application and an analyzer app. Additionally, no additives were required, and the H-CQDs were not functionalized. More importantly, the H-CQDs were morphologically and analytically characterized before and after DA detection. Because the sensor array-based system allows high specificity DA detection in both DI water and geriatric plasma, it will play an important role in biomedical applications.

Determination of tyrosine by sodium fluorescein-enhanced ABEI–H2O2–horseradish peroxidase chemiluminescence

In this study, N-(4-aminobutyl)-N-ethylisoluminol (ABEI) was used as an energy donor, while sodium fluorescein was used as an enhancer and energy acceptor, which resulted in it producing resonance energy transfer and greatly increasing the strength of chemiluminiscence (CL). When horseradish peroxidase (HRP) is added, hydrogen peroxide (H2O2) will quickly separate into hydroxyl radicals (·OH) and superoxide ions (O2·−). If tyrosine (Tyr) is present in the system, the hydroxyl group on the benzene ring of Tyr robs ·OH and O2·− in the CL system, thereby reducing the intensity of CL. Based on this phenomenon, a luminescence system of ABEI and sodium fluorescein system was established to detect Tyr for the first time. This method has an ultra-low detection limit and a wide linear range, and is cheap and easy to operate. Under various optimal conditions, the linear range is from 3.0×10−8 to 3.0×10−5 mol/L, and the limit of detection is 2.4×10−8 mol/L. It has been successfully used in the detection of dairy products with satisfactory results.

Synthesis of green fluorescent carbon quantum dots from the latex of Ficus benghalensis for the detection of tyrosine and fabrication of Schottky barrier diode

Green fluorescent CQDs have been synthesized from the latex of ficus benghalensis and polyethyleneimine and utilized for the detection of tyrosine. Further, fabricated a Schottky barrier diode.

Detection of tyrosine and monitoring tyrosinase activity using an enzyme cascade-triggered colorimetric reaction

The aromatic amino acid tyrosine is an essential precursor for the synthesis of catecholamines, including l-DOPA, tyramine, and dopamine. A number of metabolic disorders have been linked to abnormal tyrosine levels in biological fluids. In this study, we developed an enzyme cascade-triggered colorimetric reaction for the detection of tyrosine, based on the formation of yellow pigment (betalamic acid) and red fluorometric betaxanthin. Tyrosinase converts tyrosine to l-DOPA, and DOPA-dioxygenase catalyzes oxidative cleavage of l-DOPA into betalamic acid. Response is linear for tyrosine from 5 to 100 μM, and the detection limit (LOD) is 2.74 μM. The enzyme cascade reaction was applied to monitor tyrosinase activity and tyrosinase inhibition assays. Lastly, the performance of the proposed biosensor proved successful in the analysis of urine samples without the need for pre-treatment.

Colorimetric dual sensor for Cu(II) and tyrosine and its application as paper strips for detection in water and human saliva as real samples

A calix[4]arene based compound incorporating amide and morpholine moieties has been synthesized and its ion recognition property towards metal ions and application of its metal complex towards sensing of amino acids has been investigated. The synthesized compound interacts with Cu²⁺ with high selectivity and sensitivity (LOD, 0.1 ppb) in aqueous media with instant color change from colorless to yellow without interference from any other metal ions used in this study. The molecular structure of the calix compound (1) has been determined by single crystal X-ray study and the structure of its Cu²⁺ complex has been established by DFT calculation. The Cu²⁺ complex of 1 selectively detects tyrosine (LOD, 1.2 ppm) in water with distinct color change and without any interference from other 22 amino acids used in this study. The mechanism for detection of tyrosine with color change is also presented. For easy field application, paper based sensor strips have been prepared by coating compound 1 and its Cu²⁺ complex on filter paper, which have been used for semi-quantitative measurement of Cu²⁺ and tyrosine. Compound 1 and its Cu²⁺ complex have also been used for detection of Cu²⁺ and tyrosine, respectively in water and human saliva as real samples and satisfactory results are obtained.

Highly sensitive determination of L-tyrosine in pig serum based on ultrathin CuS nanosheets composite electrode

Nanometer-sized copper sulfide has remarkable properties such as metal like electrical conductivity and electrocatalytic activity. In this work, ultrathin copper sulfide nanosheets (CuS NS) were synthesized and employed to modify on surface of glassy carbon electrode (GCE) combining with chitosan (CS) and acidified multi-walled carbon nanotubes (F-MWCNTs). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that the shape of CuS NS was hexagon with side length of 13.33 ± 0.67 nm and thickness of 4.50 ± 0.58 nm. The electrochemical characteristics of different nanocomposite modified electrodes were examined by using cyclic voltammetry (CV) and differential pulse voltammetry (DPV), indicating that the modified electrode of CuS NS-CS/F-MWCNTs/GCE possessed good electrocatalytic activity towards oxidation of L-tyrosine (L-Tyr). Under the optimal condition, the modified electrode exhibited a wide linear response range for L-Tyr (0.08-1.0 μM) with a detection limit of 4.9 nM. No obvious interferences from coexisted two-fold of L-tryptophan and 50-fold of other amino acids could be observed, indicating its relatively good selectivity. The electrode also had good repeatability, reproducibility and stability. Compared with a commercial instrument analytical method, HPLC, the electrode can be successfully applied to the determination of L-Tyr in pig serums with a recovery rate of 95.7%-102.6%, and its test results are in good agreement with that of HPLC, showing its promising application value.

Phosphodiesters quaternary ammonium nanoparticles as label-free light scattering probe for turn-off detection of tyrosine

In this contribution, a new highly sensitive and selective sensor of the determination of tyrosine has been proposed based on the downturn effect of light scattering (LS) using phosphodiesters quaternary ammonium nanoparticles (PQANPs). Phosphodiesters quaternary ammonium (PQA), one of Gemini zwitterionic surfactants, self-aggregated into the micelle named as PQANPs, which generated strong LS signal in aqueous solution under the optimum condition. Interestingly, the powerful LS intensity of PQANPs with the maximum peak located at 391 nm significantly decreased after introducing trace amount of tyrosine. The decreased value of the LS intensity of the PQA-tyrosine system (ΔI_LS) was in proportion to tyrosine concentration in the ranges from 5.5 × 10^-8 mol/L to 4.68 × 10^-6 mol/L, with a detection limit of 1.38 × 10^-8 mol/L. Based on this decreased LS situation, the novel approach of the determination of tyrosine was first developed. The reaction mechanism for the interaction between PQANPs and tyrosine was also investigated. Moreover, the proposed LS assay was applied to the detection of tyrosine concentration in human serum and urine samples with satisfactory results.

Effect of GO nanosheets on spectrophotometric determination of tyrosine in urine and serum using nitrosonaphthol

Here, we aimed to use graphene oxide to improve the selectivity and sensitivity of Tyr determination via the reaction with 1-nitroso-2-naphthol as a selective reagent of Tyr. The reaction between Tyr and 1-nitroso-2-naphthol in absence and presence of GO was studied spectrophotometrically. Different parameters such as concentrations, temperature, incubation time were optimized. The obtained data showed that the maximum absorbance was achieved by using 2 mL of 0.03% 1-nitroso-2-naphthol at temperature 60 °C for 10 min. On the basis of calibration curve of various concentrations of Tyr in the presence of 20 μg mL^-1 GO, the limit of detection was 6.4 × 10^-6 M (1.15 μg mL^-1), where in absence of GO was 1.1 × 10^-5 M (19.9 μg mL^-1). The selectivity of Tyr in presence of other amino acids and phenols was studied with and without GO. The data obtained revealed that the selectivity of Tyr in presence of GO with respect to some amino acids and phenols was improved. The proposed method has been applied for the determination of Tyr in urine and serum samples. Therefore, GO is a powerful catalytic surface for the sensitive and selective determination of Try in biological fluids.

Fluorescent probes for detecting cysteine

Cysteine plays a crucial role in physiological processes. Therefore, it is necessary to develop a method for detecting cysteine. Fluorimetry has the advantages of convenient detection, short response time, high sensitivity and good selectivity. In this review, fluorescent probes that detect cysteine over the past three years are summarized based on structural features of fluorophores such as coumarin, BODIPY, rhodamine, fluorescein, CDs, QDs, etc and reaction groups including acrylate, aldehyde, halogen, 7-nitrobenzofurazan, etc. Then, effects of different combinations between fluorophores and response groups on probe properties and detection performances are discussed.

A novel dual-emission fluorescent nanohybrid containing silica nanoparticles and gold nanoclusters for ratiometric determination of cysteine based on turn-on fluorescence strategy

A novel fluorescence sensor SiO₂NPs/AuNCs nanohybrid has been used developed for ratiometric visual detection of Cys.

A redox-modulated fluorescent strategy for the highly sensitive detection of metabolites by using graphene quantum dots

In this paper, a redox-modulated fluorescent strategy based on the transformation of Fe²⁺/Fe³⁺ couple and enzymatic reaction for rapid monitoring glucose and uric acid using graphene quantum dots (GQDs) as fluorescent probe was developed. Hydrogen peroxide (H₂O₂) can be produced by the enzymatic reaction of a series of metabolites, such as glucose and uric acid. In the presence of hydrogen peroxide, Fe²⁺ can be oxidized and converted to Fe³⁺, which have a significant quenching difference in the fluorescence of graphene quantum dots (GQDs). Thus, a sensitive and label-free biosensor for the detection of uric acid and glucose was developed. Under the optimized experimental conditions, the fluorescence intensity was linearly correlated with the concentration of uric acid and glucose in the range of 0.1-45 μmolL^-1 and 0.1-30 μmolL^-1 with a detection limit of 0.026 μmolL^-1and 0.021 μmolL^-1, respectively. The proposed method was applied to the determination of uric acid and glucose in human serum samples with satisfactory results, which had potential application to detect metabolites associated with H₂O₂ release.

A Bioluminogenic Probe for Monitoring Tyrosinase Activity

A bioluminogenic probe based on luciferin was designed and synthesized to monitor tyrosinase activity. This probe was efficient in assessing tyrosinase activity in a buffered aqueous solution and in measuring endogenous tyrosinase activity in melanoma cells.

A dual-signal sensing system based on organic dyes-LDHs film for fluorescence detection of cysteine

It is of great significance to sense cysteine (Cys) in a simple and fast way because of its potential applications in biological processes.