Visible active narrow/narrow band gap CuO/Cu2SnS3 nanoheterostructures as efficient nanophotocatalysts

Binary metal oxide/ternary metal sulphide based nanoheterostructures, such as CuO/Cu₂SnS₃, were prepared via a modified hydrothermal route. The prepared nanoheterostructures were characterized using scanning electron microscopy, x-ray powder diffractometer, XPS, ultraviolet-visible spectroscopy, isoelectric point, and Brunauer-Emmett-Teller techniques. The XPS results revealed the successful incorporation of Cu⁺/Cu²⁺ with different ratios. The prepared heterostructures were tested as solar active photocatalysts for Methylene Blue (MB) photodegradation. The CuO/Cu₂SnS₃ (20% Cu₂SnS₃/80% CuO) photocatalytic results exhibited a high photodegradation efficiency (90%) after 60 min. In addition, the photonic efficiency values (ζ) were calculated to be 15.9%, 44%, and 61.4% for CuO, Cu₂SnS₃, and CuO/Cu₂SnS₃ nanoheterostructures, respectively. In addition, the reactive oxidative species were detected by the trapping experiments to get a clear insight about the photocatalytic reactivity factors. Total organic carbon (TOC) was conducted to confirm the safe photodegradation of MB dye without the formation of colorless hazardous (95.5% TOC removal). Based on the electronic band structure, the mechanism of photodegradation was investigated. The currently investigated heterostructure system is narrow/narrow bandgap, which fulfills the two contradictory conditions in terms of high solar photocatalytic activity and overcomes the rapid recombination process.

Polymorphic Control of Solution-Processed Cu2SnS3 Films with Thiol-Amine Ink Formulation

There is increasing demand for tailored molecular inks that produce phase-pure solution-processed semiconductor films. Within the Cu-Sn-S phase space, Cu₂SnS₃ belongs to the I₂-IV-VI₃ class of semiconductors that crystallizes in several different polymorphs. We report the ability of thiol-amine solvent mixtures to dissolve inexpensive bulk Cu₂S and SnO precursors to generate free-flowing molecular inks. Upon mild annealing, polymorphic control over phase-pure tetragonal (I4̅2m) and orthorhombic (Cmc2₁) Cu₂SnS₃ films was realized simply by switching the identity of the thiol (i.e., 1,2-ethanedithiol vs 2-mercaptoethanol, respectively). Polymorph control is dictated by differences in the resulting molecular metal-thiolate complexes and their subsequent decomposition profiles, which likely seed distinct Cu_2-x S phases that template the ternary sulfide sublattice. The p-type tetragonal and orthorhombic Cu₂SnS₃ films possess similar experimental direct optical band gaps of 0.94 and 0.88 eV, respectively, and strong photoelectrochemical current responses. Understanding how ink formulation dictates polymorph choice should inform the development of other thiol-amine inks for solution-processed films.

Mesoporous ferromagnetic manganese ferrite nanoparticles for enhanced visible light mineralization of azoic dye into nontoxic by-products

In this study, a one pot facile synthesis of ferromagnetic manganese ferrite nanoparticles (MnFe₂O₄) was carried out using chemical co-precipitation method for mineralization of azo dye (Congo red (CR)) in aqueous solution under visible light irradiation. The synthesized MnFe₂O₄ nanoparticles were highly crystalline and showed face-centred cubic (FCC) structure with average particle size of 58 ± 4 nm. The BET analysis of the MnFe₂O₄ nanoparticles revealed the mesoporous distribution of material with high surface area can provide large electro active sites and short diffusion paths for the transport of ions which plays a vital role in the photocatalytic degradation of CR. The point of zero charge (pH_PZC) was observed to be 6.7 indicating favourable condition for material-anionic dye interaction. The XPS studies revealed that the large amounts of oxygen vacancies were produced due to the defects in the lattice oxygen. The MnFe₂O₄ nanoparticles mineralised 98.3 ± 0.2% of 50 mg/L CR within 30 min when tested in photocatalytic reactor under 565 nm. The particles were recoverable under the influence of an external magnet after the photocatalytic reaction and were reusable. The recovered nanoparticles showed 96% of CR degradation efficiency even after five cycles of reuse. The by-product analysis with GC-MS indicated mineralization of CR into simple alcohols and acids. The aqueous solution containing mineralised CR was nontoxic to Trigonella foenumgraecum and Vigna mungo seeds and favoured increased germination, plumule and radicle length when compared to untreated CR.

Facile Solvothermal Synthesis of CuCo₂S₄ Yolk-Shells and Their Visible-Light-Driven Photocatalytic Properties

In this present work, we synthesized a yolk-shell shaped CuCo₂S₄ by a simple anion exchange method. The morphological and structural properties of the as-synthesized sample were characterized using X-ray diffraction (XRD), UV-vis diffuse reflectance spectra (UV-vis DRS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The SEM and TEM results confirmed that the uniform yolk-shell structure was formed during the solvothermal process. The band gap was about 1.41 eV, which have been confirmed by UV–vis DRS analysis. The photocatalytic property was evaluated by the photocatalytic degradation of methylene blue (MB) dye as a target pollutant under the visible-light irradiation. The experimental results confirmed the potential application of yolk-shell shape CuCo₂S₄ in visible-light photocatalytic applications.

Solar light harvesting with multinary metal chalcogenide nanocrystals

The paper reviews the state of the art in the synthesis of multinary (ternary, quaternary and more complex) metal chalcogenide nanocrystals (NCs) and their applications as a light absorbing or an auxiliary component of light-harvesting systems. This includes solid-state and liquid-junction solar cells and photocatalytic/photoelectrochemical systems designed for the conversion of solar light into the electric current or the accumulation of solar energy in the form of products of various chemical reactions. The review discusses general aspects of the light absorption and photophysical properties of multinary metal chalcogenide NCs, the modern state of the synthetic strategies applied to produce the multinary metal chalcogenide NCs and related nanoheterostructures, and recent achievements in the metal chalcogenide NC-based solar cells and the photocatalytic/photoelectrochemical systems. The review is concluded by an outlook with a critical discussion of the most promising ways and challenging aspects of further progress in the metal chalcogenide NC-based solar photovoltaics and photochemistry.