Emission color tuning and white-light generation based on photochromic control of energy transfer reactions in polymer micelles

Expanding the Color Range of Photoresponsive Multicolor Luminescent System Through Host-Guest Interaction

Photoresponsive multicolor luminescent systems offer interesting functions, which have led to applications in anticounterfeiting and biological imaging. However, expanding the color range of these materials remains a challenging task. Herein, a carbazole-modified dithienylethene derivative (DTE-CZ) that exhibits modulated fluorescence color changes through the photocyclization reaction and photolysis reaction is synthesized. DTE-CZ emits orange fluorescence, and it can release a fluorophore which emits blue fluorescence by the photolysis reaction, resulting in the color change. Upon complexation of DTE-CZ with cucurbit[10]uril (CB[10]), the fluorescence wavelength will have a blue shift and the photolysis reaction will be inhibited. Benefiting from the influence of CB[10] and the photolysis reaction of free guests, the color range of the photoresponsive system which is composed of free guests and host-guest complexes is further extended. White light emission along with a color shift from yellow-green to blue was achieved by adjusting the ratio of free guests to host-guest complexes. Finally, the photoresponsive multicolor systems are utilized to construct a photostimulated PVA film and an information encryption system. This work provides an alternative strategy for the preparing of photoresponsive multicolor luminescent system and modulation of its color range.

Photoswitching the fluorescence of nanoparticles for advanced optical applications

The dynamic optical response properties and the distinct features of nanomaterials make photoswitchable fluorescent nanoparticles (PF NPs) attractive candidates for advanced optical applications. Over the past few decades, the design of PF NPs by coupling photochromic and fluorescent motifs at the nanoscale has been actively pursued, and substantial efforts have been made to exploit their potential applications. In this perspective, we critically summarize various design principles for fabricating these PF NPs. Then, we discuss their distinct optical properties from different aspects by highlighting the capability of NPs in fabricating new, robust photoswitch systems. Afterwards, we introduce the pivotal role of PF NPs in advanced optical applications, including sensing, anti-counterfeiting and imaging. Finally, current challenges and future development of PF NPs are briefly discussed.

Efficient manipulation of Förster resonance energy transfer through host-guest interaction enables tunable white-light emission and devices in heterotopic bisnanohoops

In this study, we synthesized and reported the heterotopic bisnanohoops P5-[8,10]CPPs containing cycloparaphenylenes (CPPs) and a pillar[5]arene unit, which act not only as energy donors but also as a host for binding energy acceptors. We demonstrated that a series of elegant FRET systems could be constructed successfully through self-assembly between donors P5-[8,10]CPPs and acceptors with different emissions via host-guest interaction. These FRET systems further allow us to finely adjust the donors P5-[8,10]CPPs and acceptors (BODIPY-Br and Rh-Br) for achieving multiple color-tunable emissions, particularly white-light emission. More importantly, these host-guest complexes were successfully utilized in the fabrication of white-light fluorescent films and further integrated with a 365 nm LED lamp to create white LED devices. The findings highlight a new application of carbon nanorings in white-light emission materials, beyond the common recognition of π-conjugated molecules.

Multistimuli-Responsive Chromism of Vinylene-Linked Bisflavin Based on the Aggregation and Redox Properties

Multistimuli-responsive chromism was observed for vinylene-linked bisflavin 1 a with an extended π-conjugated platform. The yellow emission of a dilute solution of 1 a in CHCl₃ (0.2 mM) observed at 298 K under UV excitation was changed to orange or red emission upon (1) an increase of concentration, (2) a decrease of temperature, and (3) variation of the solvent. This is in contrast to the almost non stimuli-responsive chromism of the N-methylated bisflavin analogue 1 b and monoflavin 2 a. Mechanistic investigation by ¹ H NMR analysis under various conditions revealed that the extended π-conjugation platform and imide moiety of 1 a generate controllability in the formation of lower- and higher-ordered aggregates, which induce variation of the emission color upon change. Bisflavin 1 a also exhibited redox-induced chromism, where the orange emission of 1 a was quenched by the addition of hydrazine under anaerobic conditions, and changed back to the original emission upon subsequent bubbling of O₂ gas.

Aggregation-Induced Emission Luminogens with Photoresponsive Behaviors for Biomedical Applications

Fluorescent biomedical materials can visualize subcellular structures and therapy processes in vivo. The aggregation-induced emission (AIE) phenomenon helps suppress the quenching effect in the aggregated state suffered by conventional fluorescent materials, thereby contributing to design strategies for fluorescent biomedical materials. Photoresponsive biomedical materials have attracted attention because of the inherent advantages of light; i.e., remote control, high spatial and temporal resolution, and environmentally friendly characteristics, and their combination with AIE facilitates development of fluorescent molecules with efficient photochemical reactions upon light irradiation. In this review, organic compounds with AIE features for biomedical applications and design strategies for photoresponsive AIE luminogens (AIEgens) are first summarized briefly. Applications are then reviewed, with the employment of photoresponsive and AIE-active molecules for photoactivation imaging, super-resolution imaging, light-induced drug delivery, photodynamic therapy with photochromic behavior, and bacterial targeting and killing being discussed at length. Finally, the future outlook for AIEgens is considered with the aim of stimulating innovative work for further development of this field.

Emission Color Tuning and White Light Generation from a Trimolecular Cocktail in Cationic Micellar System with Promising Applicability in the Anticounterfeiting Technology

The development of photoluminescent (PL) systems, displaying multiple stimuli-responsive emission color tuning, has been the pressing priority in the recent times due to their huge role in contemporary lighting and anticounterfeiting technologies. Acknowledging this importance, we present a simple and eco-friendly PL system showing emission color tuning in response to different stimuli, that is, the composition of the system, pH, excitation wavelength, and the temperature with the plus point of getting significantly pure white light emission (WLE). The novel system is fabricated from the aqueous mixture of three organic fluorophores, umbelliferone (UMB), fluorescein (FLU), and Rhodamine-B (RB). By varying the fluorophore composition in the mixture at pH 12, nearly pure WLE with a Commission Internationale d'Eclairage (CIE) 1931 profile of (0.33, 0.33) was obtained at the excitation wavelength of 365 nm, the sustainability of which was ensured by employing the micellar self-assemblies of tetradecyltrimethylammonium bromide (TTAB) molecules. Similar WLE was obtained under mildly acidic conditions (pH 6) but at the excitation wavelength of 330 nm. By proper tuning of pH and the wavelengths of the system to use it as a fluorescent ink, we found a remarkable and highly applicable phenomenon observed for the first time, that is, triple-mode orthogonal emission color tuning with white light ON/OFF switching. We validate the vital applicability of this phenomenon in protecting the authenticity of the document with its hard-to-counterfeit property. The applicability of this phenomenon is also explored by synthesizing PVA-based fluorescent films from the tri-fluorophore mixture. Moreover, the emission color of the PL system was explored lucidly for its temperature dependence owing to the thermal responsiveness of RB emission, where the PL system proves to be a full-color RGB system.

White light employing luminescent engineered large (mega) Stokes shift molecules: a review

Large (mega) Stokes shift molecules have shown great potential in white light emission for optoelectronic applications, such as flat panel display technology, light-emitting diodes, photosensitizers, molecular probes, cellular and bioimaging, and other applications. This review aims to summarize recent developments of white light generation that incorporate a large Stokes shift component, key approaches to designing large Stokes shift molecules, perspectives on future opportunities, and remaining challenges confronting this emerging research field. After a brief introduction of feasible pathways in generating white light, exemplifications of large Stokes shift molecules as white light candidates from organic and inorganic-based materials are illustrated. Various possible ways to design such molecules have been revealed by integrating the photophysical mechanisms that are essential to produce red-shifted emission upon photoexcitation, such as excited state intramolecular proton transfer (ESIPT), intramolecular charge transfer (ICT), excited state geometrical relaxation or structural deformation, aggregation-induced emission (AIE) alongside the different formations of aggregates, interplay between monomer and excimer emission, host-guest interaction, and lastly metal to ligand charge transfer (MLCT) via harvesting triplet state. Furthermore, previously reported fluorescent materials are described and categorized based on luminescence behaviors on account of the Stokes shifts value. This review will serve as a rationalized introduction and reference for researchers who are interested in exploring large or mega Stokes shift molecules, and will motivate new strategies along with instigation of persistent efforts in this prominent subject area with great avenues.

Paintable Hybrids with Thermally Stable Dual Emission Composed of Tetraphenylethene-Integrated POSS and MEH-PPV for Heat-Resistant White-Light Luminophores

Thermally stable dual emission followed by white-light luminescence from hybrid materials is reported. Hybrid films were prepared with a spin-coating method with the mixture solution containing tetraphenylethene (TPE)-integrated polyhedral oligomeric silsesquioxane (POSS) and poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV). TPE-tethered POSS (TPE-POSS) showed high compatibility with MEH-PPV. Therefore, homogeneous films with variable concentrations of TPE-POSS were obtained. Owing to good dispersion of rigid silica cubes into matrices, POSS-containing films demonstrated high thermal stability toward molecular rearrangement by annealing as well as pyrolysis, similar to conventional polymer hybrids. Furthermore, it was found that TPE-POSS was able to enhance emission efficiencies, probably by suppressing chain aggregation. By modulating introduction ratios of TPE-POSS, dual-emission properties followed by white-light luminescence composed of cyan and orange emissions from TPE-POSS and MEH-PPV, respectively, were accomplished. It should be noted that these color balances can be preserved even in the high-temperature region (425 K). Finally, white-light luminescent materials with thermal durability were obtained.

An All-Photonic Molecular Amplifier and Binary Flip-flop

A chemical system is proposed that is capable of amplifying small optical inputs into large changes in internal composition, based on a feedback interaction between switchable fluorescence and visible-light photoswitching. This system would demonstrate bifurcating reaction kinetics under irradiation and reach one of two stable photostationary states depending on the initial composition of the system. This behavior would allow the system to act as a chemical realization of the flip-flop circuit, the fundamental element in sequential logic and binary memory storage. We use detailed numerical modeling to demonstrate the feasibility of the proposed behavior based on known molecular phenomena and comment on some of the conditions required to realize this system.

Energy transduction through FRET in self-assembled soft nanostructures based on surfactants/polymers: current scenario and prospects

The self-assembled systems of surfactants/polymers, which are capable of supporting energy funneling between fluorophores, have recently gained significant attraction. Surfactant and polymeric micelles form nanoscale structures spanning a radius of 2-10 nm are generally suitable for the transduction of energy among fluorophores. These systems have shown great potential in Förster resonance energy transfer (FRET) due to their unique characteristics of being aqueous based, tendency to remain self-assembled, spontaneous formation, tunable nature, and responsiveness to different external stimuli. This review presents current developments in the field of energy transfer, particularly the multi-step FRET processes in the self-assembled nanostructures of surfactants/polymers. The part one of this review presents a background and brief overview of soft systems and discusses certain aspects of the self-assemblies of surfactants/polymers and their co-solubilization property to bring fluorophores to close proximity to transduce energy. The second part of this review deals with single-step and multi-step FRET in the self-assemblies of surfactants/polymers and links FRET systems with advanced smart technologies including multicolor formation, data encryption, and artificial antenna systems. This review also discusses the diverse examples in the literature to present the emerging applications of FRET. Finally, the prospects regarding further improvement of FRET in self-assembled soft systems are outlined.

Full Visible Spectrum and White Light Emission with a Single, Input-Tunable Organic Fluorophore

The blue emission of M2biQ can be tuned to specific wavelengths throughout the visible region by changing the identity of the cation it interacts with. These optical properties are observed in MeCN solution and the solid state. White light is obtained in MeCN by using either the proper ratio of zinc ions or acid. Thus, M2biQ acts as a nearly universal emitter (λem = 468-690 nm) with large Stokes shifts (116-306 nm, Δν̃ = 7,042-11,823 cm-1). Full spectral profiles as well as quantum yields, lifetimes, and the crystal structures of key RGB and yellow emitters are reported. Emission wavelengths correlate with cationic radius, and TD-DFT calculations show that, for 1:1 complexes, the smaller the ion, the shorter the N-cation bond, and the greater the bathochromic emission shift.

Chemical reactivity under nanoconfinement

Confining molecules can fundamentally change their chemical and physical properties. Confinement effects are considered instrumental at various stages of the origins of life, and life continues to rely on layers of compartmentalization to maintain an out-of-equilibrium state and efficiently synthesize complex biomolecules under mild conditions. As interest in synthetic confined systems grows, we are realizing that the principles governing reactivity under confinement are the same in abiological systems as they are in nature. In this Review, we categorize the ways in which nanoconfinement effects impact chemical reactivity in synthetic systems. Under nanoconfinement, chemical properties can be modulated to increase reaction rates, enhance selectivity and stabilize reactive species. Confinement effects also lead to changes in physical properties. The fluorescence of light emitters, the colours of dyes and electronic communication between electroactive species can all be tuned under confinement. Within each of these categories, we elucidate design principles and strategies that are widely applicable across a range of confined systems, specifically highlighting examples of different nanocompartments that influence reactivity in similar ways.

A simplicity-guided cocktail approach toward multicolor fluorescent systems

A molecular cocktail containing two photochromic diarylethene derivatives that displays multicolor emission spanning blue-green to orange in a color-correlated fashion has been devised. The function does not rely on excited state communication such as energy transfer reactions, which is the typical case for similar systems. Instead, harnessing the intrinsic fluorescent and photochromic properties of the two individual diarylethene derivatives run in parallel is enough to realize the color changes. This offers an extremely flexible situation as for the choice of the fluorophores and their respective concentrations. The function is conveniently demonstrated in bulk solution at μM concentrations, where a single light source serves as the color changing stimulus.

One-pot synthesis of a white-light emissive bichromophore operated by aggregation-induced dual emission (AIDE) and partial energy transfer

Consecutive four-component insertion–alkynylation–amination–Suzuki sequence furnishes bichromophores that emit white light upon aggregation-induced dual emission (AIDE) operating by partial energy transfer between the constituting chromophores.

A new photochromic Gd-MOF with photoswitchable bluish-white to greenish-yellow emission based on electron transfer

A new Gd-MOF exhibits interesting properties of photoswitchable bluish white light to greenish yellow light emission as a result of electron transfer (ET). Photoluminescence studies on the dual-emitter Gd-MOF, which paves the way for white emission though ET.

Multi-color emission with orthogonal input triggers from a diarylethene pyrene-OTHO organogelator cocktail

A cocktail combination of stimuli responsive materials, a photoswitch and gelator, is used for multicolored emission tuning.

Broad Spectrum Tunable Photoluminescent Material Based on Cascade Fluorescence Resonance Energy Transfer between Three Fluorophores Encapsulated within the Self-Assembled Surfactant Systems

A broad spectrum tunable photoluminescent material with dual encryption based on a two-step fluorescence resonance energy transfer (FRET) between pyrene (Py), coumarin 480 (Cou480), and rhodamine 6G (R6G) in micelles of SDS and bmimDS is presented. The phenomenon is achievable due to the encapsulation of the fluorophores within these micelles. The transfer of energy as FRET between the pair Py and Cou480 showed ON at 336 nm and OFF at 402 nm in contrast to the FRET observed between the pair Cou480 and R6G that showed ON at 402 nm and OFF at 336 nm. However, the transfer of energy as FRET occurs from Py to R6G in the presence of Cou480 when excited at 336 nm, thereby making it a chain of three fluorophores with Cou480 acting as a relay fluorophore receiving energy from Py and transferring it to R6G. The different FRET scenarios between the three fluorophores in micelles provide a window for the generation of a matrix of colors, which occupies a significant 2D area in the chromaticity diagram, having potential applications in security printing. The different fluorophoric ratios generate different colors based on their individual photonic emissions and the FRET processes taking place between them. Writing tests were carried out using varied ratios of the fluorophores in the micellar systems producing different colored outputs under the UV light with insignificant visibility under the white light. We envision that this as-discovered three fluorophoric FRET system could form the basis for the future development of multi-FRET light-harvesting devices and anti-counterfeiting security inks based on much simpler non-covalent interaction aided encapsulation of the fluorophores within the self-assembled soft systems.

An all-photonic full color RGB system based on molecular photoswitches

On-command changes in the emission color of functional materials is a sought-after property in many contexts. Of particular interest are systems using light as the external trigger to induce the color changes. Here we report on a tri-component cocktail consisting of a fluorescent donor molecule and two photochromic acceptor molecules encapsulated in polymer micelles and we show that the color of the emitted fluorescence can be continuously changed from blue-to-green and from blue-to-red upon selective light-induced isomerization of the photochromic acceptors to the fluorescent forms. Interestingly, isomerization of both acceptors to different degrees allows for the generation of all emission colors within the red-green-blue (RGB) color system. The function relies on orthogonally controlled FRET reactions between the blue emitting donor and the green and red emitting acceptors, respectively.

Stimuli-responsive multicolor luminescent materials typically react on external triggers of physical nature, but photonically controlled systems which allow for remote operation were not realized. Here the authors use light as the stimulus of a responsive luminescent material which eliminates the need for physical access.

Rotaxane-Based Mechanophores Enable Polymers with Mechanically Switchable White Photoluminescence

Three mechanoresponsive polyurethane elastomers whose blue, green, and orange photoluminescence can be reversibly turned on by mechanical force were prepared and combined to create a blend that exhibits deformation-induced white photoluminescence. The three polyurethanes contain rotaxane-based supramolecular mechanoluminophores based on π-extended pyrene, anthracene, or 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) luminophores, respectively, and 1,4,5,8-naphthalenetetracarboxylic diimide as an electronically matched quencher. Each polymer shows instantly reversible, strain-dependent switching of its photoluminescence intensity when stretched and relaxed, as deformation leads to a spatial separation of the luminophore and quencher. The present study shows that the photoluminescence color can easily be tailored by variation of the luminophore and also by combining several mechanophores in one material and demonstrates that adaptability is a key advantage of supramolecular approaches to create mechanoresponsive polymers.

Color-Tunable White-Light-Emitting Materials Based on Liquid-Filled Capsules and Thermally Responsive Dyes

Color-tunable white-light-emitting materials are currently attracting much attention because of their potential applications in artificial lighting, sensing, and imaging. However, preparation of these systems from organic emitters is often cumbersome due to the interchromophoric interactions occurring upon solvent drying in the final solid materials, which can be hardly predicted and may lead to detrimental effects. To circumvent these obstacles, we have developed a new fabrication methodology that relies on dye encapsulation within liquid-filled capsules, thus enabling direct transfer of the luminescent properties from solution to the solid state and as such, rational design of miniaturized white-light-emitting materials. By introducing a thermally responsive chromophore into the capsules, these materials are further endowed with color tunability, which does not only allow ample modulation of the emitted color but also facilitate external fine control of the system so as to ensure precise realization of white light at the desired temperature and excitation wavelength.

White-light emission from a structurally simple hydrazone

Two hydrazones featuring a unique excitation wavelength-dependent dual fluorescence emission have been developed.

Diversity-Oriented Synthesis and Optical Properties of Bichromophoric Pyrrole-Fluorophore Conjugates

The mild reaction conditions of the palladium-copper coupling-isomerization reaction open a highly convergent, chromogenic route to blue emissive pyrroles in the sense of a consecutive four-component reaction. By virtue of this strategy a phenol derivative can be readily accessed, which can be transformed in a level-2 transformation to a library of bichromophoric pyrrol-fluorophore conjugates by facile alkylation with fluorophore halides. The photophysics of the underlying blue emitter derivative and the conjugates is studied by absorption and emission spectroscopy, furnishing intramolecular energy transfer at short distances as well as competing fluorescence quenching. In some cases partial energy transfer results in the occurrence of dual emission, for instance seen as magenta-rose emission arising from blue and red orange luminescence. The experimental photophysical studies are rationalized by DFT and TD-DFT calculations.

Photoactive Molecular-Based Devices, Machines and Materials: Recent Advances

Molecular and supramolecular-based systems and materials that can perform predetermined functions in response to light stimulation have been extensively studied in the past three decades. Their investigation continues to be a highly stimulating topic of chemical research, not only because of the inherent scientific value related to a bottom-up approach to functional nanostructures, but also for the prospective applications in diverse fields of technology and medicine. Light is an important tool in this context, as it can be conveniently used both for supplying energy to the system and for probing its states and transformations. In this microreview we recall some basic aspects of light-induced processes in (supra)molecular assemblies, and discuss their exploitation to implement novel functionalities with nanostructured devices, machines and materials. To this aim we illustrate a few examples from our own recent work, which are meant to illustrate the trends of current research in the field.

Dual-Mode, Anisotropy-Encoded, Ratiometric Fluorescent Nanosensors: Towards Multiplexed Detection

A nanosensor with dual-mode fluorescence response to pH and an encoded identification signal, was developed by exploiting excitation energy transfer and tailored control of molecular organization in core-shell nanoparticles. Multiple signals were acquired in a simple single-excitation dual-emission channels set-up.

Writing and erasing multicolored information in diarylethene-based supramolecular gels

Diarylethene photoswitches in supramolecular gels constitute a system where the writing and erasing of multicolored fluorescent information is easily achieved.

A facile cocktail approach implying the mixing of diarylethene (DAE) photoswitches and low molecular weight gelators (LMWG) is presented. The photoresponsive gels exhibit multicolored emission that can be precisely controlled by different light exposure schemes (wavelength and dose), applicable for fluorescence patterning/writing. Including also a blue-emitting fluorophore allows for tri-chromatic color tuning of the emission via multistep energy transfer reactions, which in turn yields a non-linear response between the emission spectra and the light dose. This feature is highly desired in data security and anti-counterfeiting contexts. The information written in the gels can be conveniently erased by light, mass diffusion, or shaking; the latter being due to the thixotropic properties of the gels.

Photoswitchable Fluorescent Diarylethene Derivatives with Thiophene 1,1-Dioxide Groups: Effect of Alkyl Substituents at the Reactive Carbons

Photoswitching and fluorescent properties of sulfone derivatives of 1,2-bis(2-alkyl-4-methyl-5-phenyl-3-thienyl)perfluorocyclopentene, 1–5, having methyl, ethyl, n-propyl, i-propyl, and i-butyl substituents at the reactive carbons (2- and 2′-positions) of the thiophene 1,1-dioxide rings were studied. Diarylethenes 1–5 underwent isomerization reactions between open-ring and closed-ring forms upon alternate irradiation with ultraviolet (UV) and visible light and showed fluorescence in the closed-ring forms. The alkyl substitution at the reactive carbons affects the fluorescent property of the closed-ring isomers. The closed-ring isomers 2b–5b with ethyl, n-propyl, i-propyl, and i-butyl substituents show higher fluorescence quantum yields than 1b with methyl substituents. In polar solvents, the fluorescence quantum yield of 1b markedly decreases, while 2b–5b maintain the relatively high fluorescence quantum yields. Although the cycloreversion quantum yields of the derivatives with methyl, ethyl, n-propyl, and i-propyl substituents are quite low and in the order of 10⁻⁵, introduction of i-butyl substituents was found to increase the yield up to the order of 10⁻³. These results indicate that appropriate alkyl substitution at the reactive carbons is indispensable for properly controlling the photoswitching and fluorescent properties of the photoswitchable fluorescent diarylethenes, which are potentially applicable to super-resolution fluorescence microscopies.

Photochrome-doped organic films for photonic keypad locks and multi-state fluorescence

The spectroscopic properties of poly(methyl methacrylate) polymer films doped with two kinds of photochromic molecular switches are investigated. A green-fluorescent sulfonyl diarylethene (P1) is combined with either a non-fluorescent diarylethene (P2) or red-fluorescent spiropyran (P3). Photoswitching between the colorless and colored isomers (P1: o-BTFO4 ↔ c-BTFO4, P2: o-DTE ↔ c-DTE, P3: SP ↔ MC) enables the P1 + P2 and P1 + P3 films to be cycled through three distinct states. From the initial state (o-BTFO4 + o-DTE/SP), irradiation with UV light generates the second state (c-BTFO4 + c-DTE/MC), where c-BTFO4 → c-DTE/MC energy transfer is established. Irradiation with green light then generates the third state (c-BTFO4 + o-DTE/SP), where the energy transfer acceptor is no longer present. Finally, irradiation with blue light regenerates the initial state. For the P1 + P2 film, only one state is fluorescent, with the irradiation inputs required to be entered in the correct order to access this state, acting as a keypad lock. For the P1 + P3 film, the states emit either no fluorescence, red fluorescence, or green fluorescence, all using a common excitation wavelength. Additionally, once the fluorescence is activated with UV light, it undergoes a time-dependent color transition from red to green, due to the pairing of P-type and T-type photochromes. These multi-photochromic systems may be useful for security ink or imaging applications.

Fluorescent Photoswitchable Diarylethenes for Biolabeling and Single-Molecule Localization Microscopies with Optical Superresolution

A modular assembly of water-soluble diarylethenes (DAEs), applicable as biomarkers for optical nanoscopy, is reported. Reversibly photoswitchable 1,2-bis(2-alkyl-6-phenyl-1-benzothiophene-1,1-dioxide-3-yl)perfluorocyclopentenes possessing a fluorescent "closed" form were decorated with one or two methoxy group(s) attached to the para-position(s) of phenyl ring(s) and two, four, or eight carboxylic acid groups. Antibody conjugates of these DAEs feature low aggregation, efficient photoswitching in aqueous buffers, specific staining of cellular structures, and photophysical properties (high emission efficiencies and low cycloreversion quantum yields) enabling their application in superresolution microscopy. Images of tubulin, vimentin, and nuclear pore complexes are presented. The superresolution images can also be acquired by using solely 488 nm light without additional photoactivation with UV light. These DAEs exhibit reversible photoswitching without requiring any additives to the imaging media and open new paths toward the modular design of fluorescent dyes for bioimaging with optical superresolution.

A fluorescent photochromic diarylethene based on naphthalic anhydride with strong solvatochromism

A diarylethene molecule consisting of an 1,8-naphthalic anhydride and two 2,5 dimethylthiophene which exhibits reversible fluorescence switching capacity as well as solvatochromism with red shift of the fluorescence maximum by more than 150 nm.

A self-assembled white-light-emitting system in aqueous medium based on a macrocyclic amphiphile

White light emission was successfully achieved with high quantum yield in a novel FRET platform based on a macrocyclic amphiphile.

Wavelength-selective and high-contrast multicolour fluorescence photoswitching in a mixture of photochromic nanoparticles

Wavelength-selective and high-contrast multicolour fluorescence photoswitching was successfully demonstrated based on the nonlinear fluorescence quenching in photochromic nanoparticles.

Carboxylated Photoswitchable Diarylethenes for Biolabeling and Super-Resolution RESOLFT Microscopy

Reversibly photoswitchable 1,2‐bis(2‐ethyl‐6‐phenyl‐1‐benzothiophene‐1,1‐dioxide‐3‐yl)perfluorocyclopentenes (EBT) having fluorescent “closed” forms were decorated with four or eight carboxylic groups and attached to antibodies. Low aggregation, efficient photoswitching in aqueous buffers, specific staining of cellular structures, and good photophysical properties were demonstrated. Alternating light pulses of UV and blue light induce numerous reversible photochemical transformations between two stables states with distinct structures. Using relatively low light intensities, EBTs were applied in biology‐related super‐resolution microscopy based on the reversible saturable (switchable) optical linear fluorescence transitions (RESOLFT) and demonstrated optical resolution of 75 nm.