Hesperidin Derivatives Contained Hydrogel Dressing for Photothermal Treatment of Melanoma and Postoperative Tissue Regeneration

Melanoma is a severe malignant skin tumor. It is crucial to effectively eliminate melanoma and promote rapid and healthy regeneration of postoperative tissue defects. Herein, hesperidin derivatives (HD) have been developed as the bioactive components of hydrogels that are capable of ablating melanoma via photothermal therapy (PTT) and promoting tissue regeneration. HD have been prepared by heating hesperidin alkaline solution followed by dialysis and lyophilization, and GelMA hydrogels encapsulating HD kill cancer cells and bacteria under near-infrared (NIR) irradiation. The in vitro test and in vivo transcriptomic analysis confirmed that the HD containing GelMA hydrogels induce the immunogenic cell death (ICD) effect of tumor cells by significantly upregulating chemokine-related, cytokine-related, and apoptosis-related genes, thereby enhancing therapeutic efficacy. In a mouse model of infected skin wounds, the HD containing hydrogels under 808 nm light irradiation effectively promoted wound repair. This was achieved through accelerated wound closure and enhanced skin regeneration, mediated by increased angiogenesis and collagen deposition. In conclusion, the HD containing hydrogels provide a new strategy for the clinical treatment of melanoma and postoperative tissue defect repair following operative resection of cancer.

Eumelanin pigment release from photo-crosslinkable methacrylated gelatin-based cryogels: Exploring the physicochemical properties and antioxidant efficacy in wound healing

Managing wounds in certain phases of the healing process still represents a big challenge. The oxidative stress, caused by reactive oxygen species (ROS), is one of the hallmarks controlling the wound healing-related process. Multifunctional biomaterials with excellent biocompatibility, tuneable properties, and easy functionalization, may allow realizing suitable three-dimensional (3D) and extracellular matrix (ECM)-mimicking structures, to efficiently control ROS levels. This might be a promising strategy for healing severe wounds. Herein, photo-crosslinkable methacrylated gelatin (GelMA)-based spongy-like cryogels (from 5 to 20 % w/v) incorporating Eumelanin from Black Soldier Flies (BSF-Eumel, 0.5 and 1.0 mg/mL), a pigment endowed with marked antioxidant properties, were developed. GelMA-based cryogels were fabricated by an easily handled and scalable cryogelation process followed by ultraviolet (UV) photo-crosslinking. BSF-Eumel sub-micrometer particles were embedded into GelMA-based cryogels by passive permeation of the solution within the polymeric network. BSF-Eumel addition resulted in more hydrophilic and porous structures, exhibiting a good stability and a prolonged release within 14 days. Furthermore, GelMA/BSF-Eumel cryogels exhibited good antioxidant activity, confirmed by a powerful quenching effect on 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical (59 % at 1.0 mg/mL of BSF-Eumel). Moreover, GelMA/BSF-Eumel cryogels at the highest GelMA concentrations (10 and 20 % w/v) accelerated human dermal fibroblasts-adult (HDF-a) migration, promoting wound closure within 24 h. They also proved to mitigate oxidative stress, modulating the production of ROS levels and preventing superoxide dismutase (SOD) activity inhibition in HDFs stimulated by lipopolysaccharide (LPS), owing to the release of BSF-Eumel. Such remarkable outcomes make GelMA/BSF-Eumel cryogels a promising antioxidant platform for wound healing.

Electrospun PLGA/PCL Nanofiber Film Loaded with LPA Promotes Full-Layer Wound Healing by Regulating the Keratinocyte Pyroptosis

Electrospun nanofibers have a number of qualities that make them a suitable choice for skin wound healing. Lysophosphatidic acid (LPA) stimulates the keratinocytes and fibroblasts to proliferate, differentiate, and migrate and enhances skin wound healing. Here, we developed the electrospun scaffolds contained in polycaprolactone (PCL) and polylactic-co-glycolic acid (PLGA). The scaffolds loaded with LPA nanoparticles retained a porous nanofiber structure and showed better physicochemical properties and biocompatibility. The scaffold continuously releases LPA to quickly initiate cell signaling and maintain long-term anti-inflammatory activity. In this study, we found that PP scaffold with LPA reduces the disordered collagen deposition and the thickness of the newborn epidermis, improves skin healing, and reduces scar formation. Explaining the mechanism of LPA mineralized tissue regeneration in skin wound healing, LPA inhibited the pyroptosis of keratinocyte, a cell death process that induces inflammation and scar formation by inhibiting the expression of TNF-α and β-catenin proteins. Thus, the electrospun PP scaffold with LPA can be potentially developed as a therapeutic avenue to target skin wound healing.

Dual Delivery of Cells and Bioactive Molecules for Wound Healing Applications

Chronic wounds not only cause significant patient morbidity but also impose a substantial economic burden on the healthcare system. The primary barriers to wound healing include a deficiency of key modulatory factors needed to progress beyond the stalled inflammatory phase and an increased susceptibility to infections. While antimicrobial agents have traditionally been used to treat infections, stem cells have recently emerged as a promising therapy due to their regenerative properties, including the secretion of cytokines and immunomodulators that support wound healing. This study aims to develop an advanced dual-delivery system integrating stem cells and antibiotics. Stem cells have previously been delivered by encapsulation in gelatin methacrylate (GelMA) hydrogels. To explore a more effective delivery method, GelMA was processed into microparticles (MP). Compared to a bulk GelMA hydrogel (HG) encapsulation, GelMA MP supported greater cell growth and enhanced in vitro wound healing activity of human mesenchymal stem cells (hMSCs), likely due to a larger surface area for cell attachment and improved nutrient exchange. To incorporate antimicrobial properties, the broad-spectrum antibiotics penicillin/streptomycin (PS) were loaded into a bulk GelMA hydrogel, which was then cryo-milled into MPs to serve as carriers for hMSCs. To achieve a more sustained antibiotic release, gelatin nanoparticles (NP) were used as carriers for PS. PS was either incorporated during NP synthesis (NP+PS(S)) or absorbed into NP after synthesis (NP+PS(A)). MPs containing PS, NP+PS(S), or NP+PS(A) were tested for their cell carrier functions and antibacterial activities. The incorporation of PS did not compromise the cell-carrying function of MP configurations. The anti-S. aureus activity was detected in conditioned media from MPs for up to eight days-four days longer than from bulk HG containing PS. Notably, the presence of hMSCs prolonged the antimicrobial activity of MPs, suggesting a synergistic effect between stem cells and antibiotics. PS loaded via synthesis (NP+PS(S)) exhibited a delayed initial release, whereas PS loaded via absorption (NP+PS(A)) provided a more immediate release, with potential for sustained delivery. This study demonstrates the feasibility of a dual-delivery system integrating thera.

Lauric acid-loaded biomimetic, biocompatible, and antioxidant jelly fig (Ficus awkeotsang Makino) pectin hydrogel accelerates wound healing in diabetic rats

Herein, we have presented a lauric acid (LA)-loaded jelly fig pectin (JFP)-based biocompatible hydrogel, which possesses strong antioxidant and antibacterial properties to treat diabetic wounds. The antioxidant and antibacterial activity of the JFP + LA hydrogels were beneficial in eliminating the reactive oxygen species (ROS) and bacterial infection in the wound bed, thereby protecting the wound surface and accelerating the tissue repair process. The in vivo diabetic wound healing studies demonstrated that applying JFP + LA hydrogels improved the rate of wound contraction and reduced the epithelialization time significantly. The epithelialization period of the control, JFP, JFP + LA 0.5 %, and JFP + LA 1 % hydrogels were 28 ± 1.5 days, 24 ± 1 days, 18.5 ± 1 days, and 19 ± 1 days, respectively. JFP also enhanced the neovascularization and collagen synthesis during wound healing. The incorporation of LA reduced the inflammation and helped recruit macrophages to proceed to other phases of wound healing in rats treated with JFP + LA hydrogels. The results presented provide insight into the clinical management of infected diabetic wounds. Overall, the results demonstrated that the JFP + LA hydrogels were an inexpensive dressing material that accelerated the healing of diabetic wounds.

NIR-responsive injectable nanocomposite hydrogels with enhanced angiogenesis for promoting full-thickness wound healing

Angiogenesis plays a vital role in the treatment of full-thickness wounds. Deferoxamine (DFO) has been employed to promote neovascularization, however, smart drug delivery systems are needed to optimize its utilization. In this study, an injectable extracellular matrix (ECM)-mimicking hydrogel (HOG@P&D) was developed by leveraging the dynamic Schiff base and hydrogen bonds among a chitosan derivative (HACC), oxidized alginate (OSA), gelatin, and DFO-loaded polydopamine nanoparticles (P&D) for efficient wound healing. The incorporation of P&D enables HOG@P&D to respond to near-infrared (NIR) irradiation, converting laser energy into heat to trigger an on-demand, rapid release of DFO, thereby effectively enhancing angiogenesis. In vitro tube formation assays revealed that the number of meshes in the HOG@P&D group was fourfold higher than that of the control group. Additionally, HOG@P&D exhibited superior mechanical properties, tissue adhesion, and injectability, allowing it to cover wounds seamlessly. This hydrogel also demonstrated antibacterial and antioxidant properties, creating a conducive microenvironment for wound healing. In vivo studies further confirmed that HOG@P&D promoted angiogenesis and mitigated inflammation by upregulating angiogenic growth factor expression, thereby accelerating full-thickness wound healing. This nanocomposite hydrogel shows significant potential as a high-performance wound dressing.

Immobilization of laccase on magnetic PEGDA-CS inverse opal hydrogel for enhancement of bisphenol A degradation in aqueous solution

Endocrine disruptors such as bisphenol A (BPA) adversely affect the environment and human health. Laccases are used for the efficient biodegradation of various persistent organic pollutants in an environmentally safe manner. However, the direct application of free laccases is generally hindered by short enzyme lifetimes, non-reusability, and the high cost of a single use. In this study, laccases were immobilized on a novel magnetic three-dimensional poly(ethylene glycol) diacrylate (PEGDA)-chitosan (CS) inverse opal hydrogel (LAC@MPEGDA@CS@IOH). The immobilized laccase showed significant improvement in the BPA degradation performance and superior storage stability compared with the free laccase. 91.1% of 100 mg/L BPA was removed by the LAC@MPEGDA@CS@IOH in 3 hr, whereas only 50.6% of BPA was removed by the same amount of the free laccase. Compared with the laccase, the outstanding BPA degradation efficiency of the LAC@MPEGDA@CS@IOH was maintained over a wider range of pH values and temperatures. Moreover, its relative activity of was maintained at 70.4% after 10 cycles, and the system performed well in actual water matrices. This efficient method for preparing immobilized laccases is simple and green, and it can be used to further develop ecofriendly biocatalysts to remove organic pollutants from wastewater.

A novel multifunctional nanocomposite hydrogel orchestrates the macrophage reprogramming-osteogenesis crosstalk to boost bone defect repair

Repairing bone defects is a complex cascade reaction process, as immune system regulation, vascular growth, and osteogenic differentiation are essential. Thus, developing a tissue-engineered biomaterial that caters to the complex healing process of bone regeneration remains a major clinical challenge. In the study, Ca2+-TA-rGO (CTAG)/GelMA hydrogels were synthesized by binding Ca2+ using metal chelation to graphene oxide (GO) nanosheets reduced by tannic acid (TA-rGO) and doping them into gelatin methacrylate (GelMA) hydrogels. TA and rGO exhibited biocompatibility and immunomodulatory properties in this composite, while Ca2+ promoted bone formation and angiogenesis. This novel nanocomposite hydrogel demonstrated good mechanical properties, degradability, and conductivity, and it could achieve slow Ca2+ release during bone regeneration. Both in vitro and in vivo experiments revealed that CTAG/GelMA hydrogel modulated macrophage reprogramming and induced a shift from macrophages to healing-promoting M2 macrophages during the inflammatory phase, promoted vascular neovascularization, and facilitated osteoblast differentiation during bone formation. Moreover, CTAG/GelMA hydrogel could downregulate the NF-κB signaling pathway, offering new insights into regulating macrophage reprogramming-osteogenic crosstalk. Conclusively, this novel multifunctional nanocomposite hydrogel provides a multistage treatment for bone and orchestrates macrophage reprogramming-osteogenic crosstalk to boost bone repair.

Endogenous/exogenous stimuli‐responsive smart hydrogels for diabetic wound healing

Diabetes significantly impairs the body's wound‐healing capabilities, leading to chronic, infection‐prone wounds. These wounds are characterized by hyperglycemia, inflammation, hypoxia, variable pH levels, increased matrix metalloproteinase activity, oxidative stress, and bacterial colonization. These complex conditions complicate effective wound management, prompting the development of advanced diabetic wound care strategies that exploit specific wound characteristics such as acidic pH, high glucose levels, and oxidative stress to trigger controlled drug release, thereby enhancing the therapeutic effects of the dressings. Among the solutions, hydrogels emerge as promising due to their stimuli‐responsive nature, making them highly effective for managing these wounds. The latest advancements in mono/multi‐stimuli‐responsive smart hydrogels showcase their superiority and potential as healthcare materials, as highlighted by relevant case studies. However, traditional wound dressings fall short of meeting the nuanced needs of these wounds, such as adjustable adhesion, easy removal, real‐time wound status monitoring, and dynamic drug release adjustment according to the wound's specific conditions. Responsive hydrogels represent a significant leap forward as advanced dressings proficient in sensing and responding to the wound environment, offering a more targeted approach to diabetic wound treatment. This review highlights recent advancements in smart hydrogels for wound dressing, monitoring, and drug delivery, emphasizing their role in improving diabetic wound healing. It addresses ongoing challenges and future directions, aiming to guide their clinical adoption.

Breathing new life into tissue engineering: exploring cutting-edge vascularization strategies for skin substitutes

Tissue-engineered skin substitutes (TESS) emerged as a new therapeutic option to improve skin transplantation. However, establishing an adequate and rapid vascularization in TESS is a critical factor for their clinical application and successful engraftment in patients. Therefore, several methods have been applied to improve the vascularization of skin substitutes including (i) modifying the structural and physicochemical properties of dermal scaffolds; (ii) activating biological scaffolds with growth factor-releasing systems or gene vectors; and (iii) developing prevascularized skin substitutes by loading scaffolds with capillary-forming cells. This review provides a detailed overview of the most recent and important developments in the vascularization strategies for skin substitutes. On the one hand, we present cell-based approaches using stem cells, microvascular fragments, adipose tissue derived stromal vascular fraction, endothelial cells derived from blood and skin as well as other pro-angiogenic stimulation methods. On the other hand, we discuss how distinct 3D bioprinting techniques and microfluidics, miRNA manipulation, cell sheet engineering and photosynthetic scaffolds like GelMA, can enhance skin vascularization for clinical applications. Finally, we summarize and discuss the challenges and prospects of the currently available vascularization techniques that may serve as a steppingstone to a mainstream application of skin tissue engineering.

Advances in nucleic acid delivery strategies for diabetic wound therapy

In recent years, the prevalence of diabetic wounds has significantly increased, posing a substantial medical challenge due to their propensity for infection and delayed healing. These wounds not only increase mortality rates but also lead to amputations and severe mobility issues. To address this, advancements in bioactive molecules such as genes, growth factors, proteins, peptides, stem cells, and exosomes into targeted gene therapies have emerged as a preferred strategy among researchers. Additionally, the integration of photothermal therapy (PTT), nucleic acid, and gene therapy, along with 3D printing technology and the layer-by-layer (LBL) self-assembly approach, shows promise in diabetic wound treatment. Effective delivery of small interfering RNA (siRNA) relies on gene vectors. This review provides an in-depth exploration of the pathophysiological characteristics observed in diabetic wounds, encompassing diminished angiogenesis, heightened levels of reactive oxygen species, and impaired immune function. It further examines advancements in nucleic acid delivery, targeted gene therapy, advanced drug delivery systems, layer-by-layer (LBL) techniques, negative pressure wound therapy (NPWT), 3D printing, hyperbaric oxygen therapy, and ongoing clinical trials. Through the integration of recent research insights, this review presents innovative strategies aimed at augmenting the multifaceted management of diabetic wounds, thus paving the way for enhanced therapeutic outcomes in the future.

Minimally invasive soft tissue repair using shrunken scaffolds

The minimally invasive injection of tissue engineering scaffolds is of interest as it requires a smaller incision and quickens recovery. However, the engineering of scaffolds capable of injection remains a challenge. Here, we report on a shrunken scaffold inspired by the shrinking of puffed food in a humid environment. A scaffold is freeze-dried to remove water then placed in a humid atmosphere. The humidity causes the dry scaffold to shrink by up to 90%. In addition, the humidity treatment reduces the scaffolds modulus minimizing the foreign body response after implantation. The scaffolds can rapidly swell into their original size and shape after application. A tool for the delivery of the minimally invasive scaffolds is developed and we demonstrate the potential for minimally invasive delivery using this shrinking technique.

A differential-targeting core-shell microneedle patch with coordinated and prolonged release of mangiferin and MSC-derived exosomes for scarless skin regeneration

Microneedles for skin regeneration are conventionally restricted by uncontrollable multi-drug release, limited types of drugs, and poor wound adhesion. Here, a novel core-shell microneedle patch is developed for scarless skin repair, where the shell is composed of hydrophilic gelatin methacryloyl (GelMA) loaded with mangiferin, an anti-inflammatory small molecule, and the core is composed of hydrophobic poly (lactide-co-propylene glycol-co-lactide) dimethacrylates (PGLADMA) loaded with bioactive macromolecule and human mesenchymal stromal cell (hMSC)-derived exosomes. This material choice provides several benefits: the GelMA shell provides a swelling interface for tissue interlocking and rapid release of mangiferin at an early wound healing stage for anti-inflammation, whereas the PGLADMA core offers long-term encapsulation and release of exosomes (30% release in 3 weeks), promoting sustained angiogenesis and anti-inflammation. Our results demonstrate that the core-shell microneedle possesses anti-inflammatory properties and can induce angiogenesis both in vitro in terms of macrophage polarization and tube formation of human umbilical vein endothelial cells (HUVECs), and in vivo in terms of anti-inflammation, re-epithelization, and vessel formation. Importantly, we also observe reduced scar formation in vivo. Altogether, the degradation dynamics of our hydrophilic/hydrophobic materials enable the design of a core-shell microneedle for differential and prolonged release, promoting scarless skin regeneration, with potential for other therapies of long-term exosome release.

In situ light-activated materials for skin wound healing and repair: A narrative review

Dermal wounds are a major global health burden made worse by common comorbidities such as diabetes and infection. Appropriate wound closure relies on a highly coordinated series of cellular events, ultimately bridging tissue gaps and regenerating normal physiological structures. Wound dressings are an important component of wound care management, providing a barrier against external insults while preserving the active reparative processes underway within the wound bed. The development of wound dressings with biomaterial constituents has become an attractive design strategy due to the varied functions intrinsic in biological polymers, such as cell instructiveness, growth factor binding, antimicrobial properties, and tissue integration. Using photosensitive agents to generate crosslinked or photopolymerized dressings in situ provides an opportunity to develop dressings rapidly within the wound bed, facilitating robust adhesion to the wound bed for greater barrier protection and adaptation to irregular wound shapes. Despite the popularity of this fabrication approach, relatively few experimental wound dressings have undergone preclinical translation into animal models, limiting the overall integrity of assessing their potential as effective wound dressings. Here, we provide an up-to-date narrative review of reported photoinitiator- and wavelength-guided design strategies for in situ light activation of biomaterial dressings that have been evaluated in preclinical wound healing models.

Application of Deferoxamine in Tissue Regeneration Attributed to Promoted Angiogenesis

Deferoxamine, an iron chelator used to treat diseases caused by excess iron, has had a Food and Drug Administration-approved status for many years. A large number of studies have confirmed that deferoxamine can reduce inflammatory response and promote angiogenesis. Blood vessels play a crucial role in sustaining vital life by facilitating the delivery of immune cells, oxygen, and nutrients, as well as eliminating waste products generated during cellular metabolism. Dysfunction in blood vessels may contribute significantly to the development of life-threatening diseases. Anti-angiogenesis therapy and pro-angiogenesis/angiogenesis strategies have been frequently recommended for various diseases. Herein, we describe the mechanism by which deferoxamine promotes angiogenesis and summarize its application in chronic wounds, bone repair, and diseases of the respiratory system. Furthermore, we discuss the drug delivery system of deferoxamine for treating various diseases, providing constructive ideas and inspiration for the development of new treatment strategies.

Deferoxamine-Loaded Chitosan-Based Hydrogel on Bone Implants Showing Enhanced Bond Strength and Pro-Angiogenic Effects

Angiogenesis is vital for bone fracture healing and plays a significant role in the fate of orthopedic implants. The growth and maintenance of new blood vessels at the fracture site of patients is essential, which promotes the clinical outcome of plasma sprayed Ti (PST) coated orthopedic implants. In order to endow the PST coating with pro-angiogenic effects, deferoxamine-loaded chitosan-based hydrogel was fabricated on the coating surface. Polydopamine-modified chitosan (CS/PDA) hydrogel exhibited enhanced bonding strength to PST coatings as evidenced by scratch test. The deferoxamine-loaded CS/PDA (CS/PDA-DFO) exhibited a sustained drug-release property, and the cumulative concentration of released DFO reached 20.21 μg/mL on day 7. PST-CS/PDA with higher wettability and active group quantity enhanced the viability and adhesion characteristics of human umbilical vein endothelial cells (HUVECs) and upregulated the secretion level of nitric oxide and vascular endothelial growth factor. Moreover, the introduction of DFO in PST-CS/PDA further enhanced the pro-angiogenic effects. Above all, this study offers a novel approach for developing hydrogel coating on orthopedic implants showing enhanced bonding strength and pro-angiogenic effects.

Optimizing Wound Healing: Examining the Influence of Biopolymers Through a Comprehensive Review of Nanohydrogel-Embedded Nanoparticles in Advancing Regenerative Medicine

Nanohydrogel wound healing refers to the use of nanotechnology-based hydrogel materials to promote the healing of wounds. Hydrogel dressings are made up of a three-dimensional network of hydrophilic polymers that can absorb and retain large amounts of water or other fluids. Nanohydrogels take this concept further by incorporating nanoscale particles or structures into the hydrogel matrix. These nanoparticles can be made of various materials, such as silver, zinc oxide, or nanoparticles derived from natural substances like chitosan. The inclusion of nanoparticles can provide additional properties and benefits to the hydrogel dressings. Nanohydrogels can be designed to release bioactive substances, such as growth factors or drugs, in a controlled manner. This allows for targeted delivery of therapeutics to the wound site, promoting healing and reducing inflammation. Nanoparticles can reinforce the structure of hydrogels, improving their mechanical strength and stability. Nanohydrogels often incorporate antimicrobial nanoparticles, such as silver or zinc oxide. These nanoparticles have shown effective antimicrobial activity against a wide range of bacteria, fungi, and other pathogens. By incorporating them into hydrogel dressings, nanohydrogels can help prevent or reduce the risk of infection in wounds. Nanohydrogels can be designed to encapsulate and release bioactive substances, such as growth factors, peptides, or drugs, in a controlled and sustained manner. This targeted delivery of therapeutic agents promotes wound healing by facilitating cell proliferation, reducing inflammation, and supporting tissue regeneration. The unique properties of nanohydrogels, including their ability to maintain a moist environment and deliver bioactive agents, can help accelerate the wound healing process. By creating an optimal environment for cell growth and tissue repair, nanohydrogels can promote faster and more efficient healing of wounds.

Recent advances on 3D-bioprinted gelatin methacrylate hydrogels for tissue engineering in wound healing: A review of current applications and future prospects

Advancements in 3D bioprinting, particularly the use of gelatin methacrylate (GelMA) hydrogels, are ushering in a transformative era in regenerative medicine and tissue engineering. This review highlights the pivotal role of GelMA hydrogels in wound healing and skin regeneration. Its biocompatibility, tunable mechanical properties and support for cellular proliferation make it a promising candidate for bioactive dressings and scaffolds. Challenges remain in optimizing GelMA hydrogels for clinical use, including scalability of 3D bioprinting techniques, durability under physiological conditions and the development of advanced bioinks. The review covers GelMA's applications from enhancing wound dressings, promoting angiogenesis and facilitating tissue regeneration to addressing microbial infections and diabetic wound healing. Preclinical studies underscore GelMA's potential in tissue healing and the need for further research for real-world applications. The future of GelMA hydrogels lies in overcoming these challenges through multidisciplinary collaboration, advancing manufacturing techniques and embracing personalized medicine paradigms.

Multifunctional Hydrogels for the Healing of Diabetic Wounds

The healing of diabetic wounds is hindered by various factors, including bacterial infection, macrophage dysfunction, excess proinflammatory cytokines, high levels of reactive oxygen species, and sustained hypoxia. These factors collectively impede cellular behaviors and the healing process. Consequently, this review presents intelligent hydrogels equipped with multifunctional capacities, which enable them to dynamically respond to the microenvironment and accelerate wound healing in various ways, including stimuli -responsiveness, injectable self-healing, shape -memory, and conductive and real-time monitoring properties. The relationship between the multiple functions and wound healing is also discussed. Based on the microenvironment of diabetic wounds, antibacterial, anti-inflammatory, immunomodulatory, antioxidant, and pro-angiogenic strategies are combined with multifunctional hydrogels. The application of multifunctional hydrogels in the repair of diabetic wounds is systematically discussed, aiming to provide guidelines for fabricating hydrogels for diabetic wound healing and exploring the role of intelligent hydrogels in the therapeutic processes.

Application of photo-crosslinkable gelatin methacryloyl in wound healing

Wound healing is a complex and coordinated biological process easily influenced by various internal and external factors. Hydrogels have immense practical importance in wound nursing because of their environmental moisturising, pain-relieving, and cooling effects. As photo-crosslinkable biomaterials, gelatine methacryloyl (GelMA) hydrogels exhibit substantial potential for tissue repair and reconstruction because of their tunable and beneficial properties. GelMA hydrogels have been extensively investigated as scaffolds for cell growth and drug release in various biomedical applications. They also hold great significance in wound healing because of their similarity to the components of the extracellular matrix of the skin and their favourable physicochemical properties. These hydrogels can promote wound healing and tissue remodelling by reducing inflammation, facilitating vascularisation, and supporting cell growth. In this study, we reviewed the applications of GelMA hydrogels in wound healing, including skin tissue engineering, wound dressing, and transdermal drug delivery. We aim to inspire further exploration of their potential for wound healing.

Rational Design of Multifunctional Hydrogels for Wound Repair

The intricate microenvironment at the wound site, coupled with the multi-phase nature of the healing process, pose significant challenges to the development of wound repair treatments. In recent years, applying the distinctive benefits of hydrogels to the development of wound repair strategies has yielded some promising results. Multifunctional hydrogels, by meeting the different requirements of wound healing stages, have greatly improved the healing effectiveness of chronic wounds, offering immense potential in wound repair applications. This review summarized the recent research and applications of multifunctional hydrogels in wound repair. The focus was placed on the research progress of diverse multifunctional hydrogels, and their mechanisms of action at different stages of wound repair were discussed in detail. Through a comprehensive analysis, we found that multifunctional hydrogels play an indispensable role in the process of wound repair by providing a moist environment, controlling inflammation, promoting angiogenesis, and effectively preventing infection. However, further implementation of multifunctional hydrogel-based therapeutic strategies also faces various challenges, such as the contradiction between the complexity of multifunctionality and the simplicity required for clinical translation and application. In the future, we should work to address these challenges, further optimize the design and preparation of multifunctional hydrogels, enhance their effectiveness in wound repair, and promote their widespread application in clinical practice.

Research advances in smart responsive-hydrogel dressings with potential clinical diabetic wound healing properties

The treatment of chronic and non-healing wounds in diabetic patients remains a major medical problem. Recent reports have shown that hydrogel wound dressings might be an effective strategy for treating diabetic wounds due to their excellent hydrophilicity, good drug-loading ability and sustained drug release properties. As a typical example, hyaluronic acid dressing (Healoderm) has been demonstrated in clinical trials to improve wound-healing efficiency and healing rates for diabetic foot ulcers. However, the drug release and degradation behavior of clinically-used hydrogel wound dressings cannot be adjusted according to the wound microenvironment. Due to the intricacy of diabetic wounds, antibiotics and other medications are frequently combined with hydrogel dressings in clinical practice, although these medications are easily hindered by the hostile environment. In this case, scientists have created responsive-hydrogel dressings based on the microenvironment features of diabetic wounds (such as high glucose and low pH) or combined with external stimuli (such as light or magnetic field) to achieve controllable drug release, gel degradation, and microenvironment improvements in order to overcome these clinical issues. These responsive-hydrogel dressings are anticipated to play a significant role in diabetic therapeutic wound dressings. Here, we review recent advances on responsive-hydrogel dressings towards diabetic wound healing, with focus on hydrogel structure design, the principle of responsiveness, and the behavior of degradation. Last but not least, the advantages and limitations of these responsive-hydrogels in clinical applications will also be discussed. We hope that this review will contribute to furthering progress on hydrogels as an improved dressing for diabetic wound healing and practical clinical application.

A sustained-release microcarrier effectively prolongs and enhances the antibacterial activity of lysozyme

Bacterial infections have become a great threat to public health in recent years. A primary lysozyme is a natural antimicrobial protein; however, its widespread application is limited by its instability. Here, we present a poly (N-isopropylacrylamide) hydrogel inverse opal particle (PHIOP) as a microcarrier of lysozyme to prolong and enhance the efficiency against bacteria. This PHIOP-based lysozyme (PHIOP-Lys) formulation is temperature-responsive and exhibits long-term sustained release of lysozyme for up to 16 days. It shows a potent antibacterial effect toward both Escherichia coli and Staphylococcus aureus, which is even higher than that of free lysozyme in solution at the same concentration. PHIOPs-Lys were demonstrated to effectively inhibit bacterial infections and enhance wound healing in a full-thickness skin wound rat model. This study provides a novel pathway for prolonging the enzymatic activity and antibacterial effects of lysozyme.

3D Biomimetic Calcified Cartilaginous Callus that Induces Type H Vessels Formation and Osteoclastogenesis

The formation of a calcified cartilaginous callus (CACC) is crucial during bone repair. CACC can stimulate the invasion of type H vessels into the callus to couple angiogenesis and osteogenesis, induce osteoclastogenesis to resorb the calcified matrix, and promote osteoclast secretion of factors to enhance osteogenesis, ultimately achieving the replacement of cartilage with bone. In this study, a porous polycaprolactone/hydroxyapatite-iminodiacetic acid-deferoxamine (PCL/HA-SF-DFO) 3D biomimetic CACC is developed using 3D printing. The porous structure can mimic the pores formed by the matrix metalloproteinase degradation of the cartilaginous matrix, HA-containing PCL can mimic the calcified cartilaginous matrix, and SF anchors DFO onto HA for the slow release of DFO. The in vitro results show that the scaffold significantly enhances angiogenesis, promotes osteoclastogenesis and resorption by osteoclasts, and enhances the osteogenic differentiation of bone marrow stromal stem cells by promoting collagen triple helix repeat-containing 1 expression by osteoclasts. The in vivo results show that the scaffold significantly promotes type H vessels formation and the expression of coupling factors to promote osteogenesis, ultimately enhancing the regeneration of large-segment bone defects in rats and preventing dislodging of the internal fixation screw. In conclusion, the scaffold inspired by biological bone repair processes effectively promotes bone regeneration.

Black phosphorus-enhanced injectable hydrogel for infected soft tissue healing

The misuse of antibiotics makes clinical treatment of soft tissue infection a huge challenge in prosthesis replacement. In this study, a black phosphorus (BP)-enhanced antibacterial injectable hydrogel (HAABP) was developed by the dynamic coordinative cross-linking among thiolated hyaluronic acid, silver ion (Ag+), and BP. HAABP has been proven to possess typical porous structures, excellent injectability, and rapid self-healing properties. In addition, the shear modulus was positive correlative to the concentration of BP. In vitro, HAABP maintained good cytocompatibility and showed a highly efficient synergistic inhibitory effect on Staphylococcus aureus through the irradiation of near infrared light and the release of Ag+. In vivo, HAABP not only inhibited the persistent infection but also accelerated the deposition of collagen fibers and angiogenesis by down-regulating the inflammatory factor TNF-α in the infectious wound defect, thereby repairing the natural barrier of tissue. This study developed a BP-enhanced injectable hydrogel that provided a simple and efficient synergistic antibacterial strategy to treat soft tissue infections around prostheses.

Wound microenvironment self-adaptive hydrogel with efficient angiogenesis for promoting diabetic wound healing

Neovascularization is critical to improve the diabetic microenvironment, deliver abundant nutrients to the wound and promote wound closure. However, the excess of oxidative stress impedes the healing process. Herein, a self-adaptive multifunctional hydrogel with self-healing property and injectability is fabricated through a boronic ester-based reaction between the phenylboronic acid groups of the 3-carboxyl-4-fluorophenylboronic acid -grafted quaternized chitosan and the hydroxyl groups of the polyvinyl alcohol, in which pro-angiogenic drug of desferrioxamine (DFO) is loaded in the form of gelatin microspheres (DFO@G). The boronic ester bonds of the hydrogel can self-adaptively react with hyperglycemic and hydrogen peroxide to alleviate oxidative stress and release DFO@G in the early phase of wound healing. A sustained release of DFO is then realized by responding to overexpressed matrix metalloproteinases. In a full-thickness diabetic wound model, the DFO@G loaded hydrogel accelerates angiogenesis by upregulating expression of hypoxia-inducible factor-1 and angiogenic growth factors, resulting in collagen deposition and rapid wound closure. This multifunctional hydrogel can not only self-adaptively change the microenvironment to a pro-healing state by decreasing oxidative stress, but also respond to matrix metalloproteinases to release DFO. The self-adaptive multifunctional hydrogel has a potential for treating diabetic wounds.

•

Injectable self-healing hydrogel was prepared based on boronic ester-based reaction.

•

The hydrogel could self-adaptively regulate the microenvironment to a pro-healing state.

•

The hydrogel could efficiently promoting diabetic wound healing by accelerating angiogenesis.

Asiaticoside polymeric nanoparticles for effective diabetic wound healing through increased collagen biosynthesis: In-vitro and in-vivo evaluation

Asiaticoside (AST) is a naturally available phytoconstituent that enables effective wound healing mainly by promoting collagen biosynthesis. However, the physicochemical nature of AST such as high molecular weight (959.12 g/mol), poor water solubility and poor permeability limits its therapeutic effects. This study aims to develop Asiaticoside polymeric nanoparticles (AST PNP) embedded in a gelatin based biodegradable hydrogel (15 % w/v) for application in the wound cavity to enable sustained release of AST and enhance its therapeutic effects. The AST PNP were fabricated in the desired size range (168.4 nm; PDI (0.09)) and the morphology, rate of fluid uptake, rate of water loss, and water vapor transmission rate of AST PNP incorporated hydrogel were determined. AST PNP gel showed porous structural morphology and possessed ideal characteristics as a graft for wound healing. The drug release kinetics and cellular uptake of AST PNP were investigated wherein, AST PNP demonstrated sustained release profile upto 24 h in comparison to free AST (complete release within 6 h) and exhibited an enhanced intra-cellular uptake in fibroblasts within 3 h compared to the free drug. In-vitrocell culture studies also demonstrated significant proliferation and migration of fibroblasts in the presence of AST PNP. Additionally, AST PNP gel upon application to the wounds of diabetic rats depicted improved wound healing efficacy in terms of improved collagen biosynthesis, upregulated COL-1 protein level (∼1.85 fold vs free AST), and enhanced expression of α-SMA compared to control groups. Altogether, formulation of AST as polymeric nanoparticles in a gel based carrier offered significant improvement in the therapeutic properties of AST for the management of diabetic wounds.

Properties and Printability of the Synthesized Hydrogel Based on GelMA

Gelatin methacryloyl (GelMA) has recently attracted increasing attention. Unlike other hydrogels, it allows for the adjustment of the mechanical properties using such factors as degree of functionalization, concentration, and photocrosslinking parameters. In this study, GelMA with a high degree of substitution (82.75 ± 7.09%) was synthesized, and its suitability for extrusion printing, cytocompatibility, and biocompatibility was studied. Satisfactory printing quality was demonstrated with the 15% concentration hydrogel. The high degree of functionalization led to a decrease in the ability of human adipose-derived stem cells (ADSCs) to adhere to the GelMA surface. During the first 3 days after sowing, proliferation was observed. Degradation in animals after subcutaneous implantation was slowed down.

An antibacterial and proangiogenic double-layer drug-loaded microneedle patch for accelerating diabetic wound healing

Diabetic wounds are difficult to heal because of bacterial infections and insufficient angiogenesis. Herein, we report a double-layer drug-loaded microneedle patch with antibacterial and angiogenesis-promoting properties for diabetic wound healing. The double-layer microneedle comprises the hyaluronic acid (HA)-loaded antibacterial drug tetracycline hydrochloride (TCH) as the tip and a mixture of chitosan and silk fibroin containing the angiogenic drug deferoxamine (DFO) as the substrate. In the double-layer drug-loaded microneedle system (DMN@TCH/DFO), rapid dissolution of HA at the tip releases TCH to promote early antibacterial activity. The substrate exhibits excellent swelling properties, facilitating the absorption of tissue fluid from the wound to promote wound contraction. Simultaneously, DFO is released to promote angiogenesis. Therefore, DMN@TCH/DFO exhibited adequate mechanical properties, excellent swelling and biocompatibility, antibacterial properties, and angiogenesis-promoting capabilities. In a wound model of diabetic rats, DMN@TCH/DFO reduced inflammatory responses, promoted angiogenesis, and facilitated collagen deposition, thereby accelerating diabetic wound healing. Overall, DMN@TCH/DFO can accelerate the healing of diabetic wounds and has clinical application prospects.

The Promising Hydrogel Candidates for Preclinically Treating Diabetic Foot Ulcer: A Systematic Review and Meta-Analysis

Significance: Diabetic foot ulcer (DFU) causes high amputation rates owing to its aberrant wound healing. Traditional dressings cannot effectively contribute to DFU healing. Functional hydrogels have been proposed as a promising novel dressing to treat DFU in future, but the evidence for various hydrogels to heal DFU is still ambiguous. Recent Advances: In accordance with PRISMA and CONSORT guidelines, a meta-analysis was performed to evaluate the efficacy of functional hydrogels. Four electronic databases and one website were used for data searching. Twenty-four animal studies and six clinical trials met the inclusion criteria with a total of 399 diabetic murine models and 278 patients with DFU. Critical Issues: Functional hydrogels accelerated the healing progress for DFU and relieved symptoms in patients. According to their characteristics, the functional hydrogels were divided into antioxidant hydrogel (AOH), antibacterial hydrogel (ABH), multifunctional hydrogel (MFH), proangiogenic hydrogel, and hydrogel promoting proliferation (PPH). By network meta-analysis, AOH and MFH were considered the premium options for treating wounds of diabetic patients at whole stage. Future Direction: Functional hydrogels effectively accelerate healing rates in wounds of diabetic animals. Hydrogels of AOH and MFH might become the ideal candidates for clinical trials on DFU treatment, based on the meta-analyses from the reported work. Early treatment with AOH followed a week later with ABH, which might become an advanced strategy for DFU in future. This information is very important for researchers or/and physicians in taking consideration for alternate application of hydrogel dressings. Scope and Significance: The treatment of DFU imposes a huge burden on medical workers. If DFU is not treated properly, patients will have to suffer from amputation and from spiritual agony. Although various topical dressings have been designated for DFU, the healing ability of those dressings is still unknown well. In this review and meta-analysis, we quantitatively evaluated the reported outcomes of functional hydrogels, pure scaffolds, and controls in 2-week interval. Healing ability of various kinds of functional hydrogels was also assessed in different stages of wound, aiming to screen promising candidates for DFU treatment. This information is valuable in designing smart dressings for researchers or/and physicians in future. Translational Relevance: Considering many external factors like formation of bacterial film and internal factors like hyperglycemia, the progress during DFU healing could involve many biochemical aspects. Persistent inflammation, oxidation stress, and impaired angiogenesis lead to prolonged wound healing and even lethal outcomes. Thus, improvement of topical conditions and inhibition of adverse factors will lead to the alleviated morbidity and even mortality. Clinical Relevance: DFU brings about great burden on patients and medical staffs because of high morbidity and poor prognosis. Improper and powerless treatment might induce high rates of amputation and mortality. Functional hydrogels, mimicking extracellular matrices, would provide the tissue with suitable media and functions to promote DFU healing. The application of various types of hydrogels could be a promising solution to heal DFU and reduce adverse events and costs.

Smart bioadhesives for wound healing and closure

The high demand for rapid wound healing has spurred the development of multifunctional and smart bioadhesives with strong bioadhesion, antibacterial effect, real-time sensing, wireless communication, and on-demand treatment capabilities. Bioadhesives with bio-inspired structures and chemicals have shown unprecedented adhesion strengths, as well as tunable optical, electrical, and bio-dissolvable properties. Accelerated wound healing has been achieved via directly released antibacterial and growth factors, material or drug-induced host immune responses, and delivery of curative cells. Most recently, the integration of biosensing and treatment modules with wireless units in a closed-loop system yielded smart bioadhesives, allowing real-time sensing of the physiological conditions (e.g., pH, temperature, uric acid, glucose, and cytokine) with iterative feedback for drastically enhanced, stage-specific wound healing by triggering drug delivery and treatment to avoid infection or prolonged inflammation. Despite rapid advances in the burgeoning field, challenges still exist in the design and fabrication of integrated systems, particularly for chronic wounds, presenting significant opportunities for the future development of next-generation smart materials and systems.

A critical review on nanomaterial based therapeutics for diabetic wound healing

Diabetes mellitus is a chronic endocrine disease that occurs mostly in the state of hyperglycemia (elevated blood glucose level). In the recent times, diabetes is listed under world's utmost critical health issues. Wound treatment procedures are complicated in diabetic individuals all over the world. Diabetic wound care not only involves high-cost, but also the primary cause of hospitalization, which can lead to amputation thereby reducing diabetic patient life expectancy. To lower the risk of amputation, wound healing requires the development of effective treatments. Traditional management systems for Diabetes are frequently chastised due to their high costs, difficulties in maintaining a sustainable supply chain and limited disposal alternatives. The worrisome rise in diabetes prevalence has sparked a surge of interest in the discovery of viable remedies to supplement existing treatments. Nanomaterials wound healing has a lot of potential for treating and preventing wound infections and it has recently gained popularity owing to its ability to transport drugs to the wound area in a regulated fashion, potentially overpowering the limits of traditional approaches. This research assessed several nanosystems, such as nanocarriers and nanotherapeutics, to explore how they can benefit in diabetic wound healing, with a focus on current obstacles and future prospects.

Effects and Progress of Photo-Crosslinking Hydrogels in Wound Healing Improvement

Wound healing is a dynamic physiological process, including three stages: inflammation, tissue formation, and remodeling. The quality of wound healing is affected by many topical and systemic factors, while any small factor may affect the process. Therefore, improving the quality of wound healing is a complex and arduous challenge. Photo-crosslinking reaction using visible light irradiation is a novel method for hydrogel preparation. Photo-crosslinking hydrogels can be controlled in time and space, and are not interfered by temperature conditions, which have been widely used in the fields of medicine and engineering. This review aims to summarize the application of photo-crosslinking hydrogels in improving the quality of wound healing, mainly including the material design, application mechanism, and effect of photo-crosslinking hydrogels applied in wound healing, followed by the applicable animal models for experimental research. Finally, this review analyzes the clinical application prospects of photo-crosslinking hydrogels in the field of wound healing.

Secretory Fluid-Aggregated Janus Electrospun Short Fiber Scaffold for Wound Healing

Exudate management is critical to improve chronic wound healing. Herein, inspired by a Janus-structured lotus leaf with asymmetric wettability, a Janus electrospun short fiber scaffold is fabricated via electrospinning technologies and short fiber modeling. This scaffold is composed of hydrophilic 2D curcumin-loaded electrospun fiber and hydrophobic 3D short fiber via layer-by-layer assembly and electrostatic interactions which can aggregate the wound exudate by pumping from the hydrophobic layer to the hydrophilic via multiple contact points between hydrophilic and hydrophobic fibers, and simultaneously trigger the cascade release of curcumin in the upper 2D electrospun fiber. The 3D short fiber with high porosity and hydrophobicity can quickly aggregate exudate within 30 s after compounding with hydrophilic 2D electrospun fiber via a spontaneous pump. In vitro experiments show that Janus electrospun short fiber has good biocompatibility, and the cascade release of curcumin can significantly promote the proliferation and migration of fibroblasts. In vivo experiments show that it can trigger cascade release of curcumin by aggregating wound exudate, so as to accelerate wound healing process and promote collagen deposition and vascularization. Hence, this unique biometric Janus scaffold provides an alternative for chronic wound healing.

Antibacterial and Angiogenic Poly(ionic liquid) Hydrogels

Wounds, particularly under low-hydration conditions, require more time to repair successfully. Therefore, there is an urgent need to develop wound dressings that can accelerate wound healing. Hydrogels, which can maintain a moist environment around the wound and allow gas to pass through the material, act as antibacterial hydrogels as dressings and have great application value in the treatment of wounds. In addition, wound dressings (hydrogels) containing antibacterial capacity have lasting antibacterial effects and reduce damage to cells. In this work, we firstly synthesized two antibacterial agents: imidazolium poly(ionic liquids) containing sulfhydryl (Imidazole-SH) and ε-Poly(lysine) containing SH (EPL-SH). Then, lysine as a cross-linking agent, by “thiol-ene” click reaction, was mixed with Deferoxamine (DFO) to prepare the antibacterial hydrogels. The in vitro assays showed that the hydrogels could effectively kill Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). In addition, it also could reduce the inflammatory response produced by Lipopolysaccharide (LPS). More importantly, according to the transwell and angiogenesis assays, DFO-incorporated hydrogels promoted the migration and vascular repair of human umbilical vein endothelial cells (HUVECs). All the results revealed that the hydrogels provided new strategies for wound dressings.

Current Advances in the Development of Hydrogel-Based Wound Dressings for Diabetic Foot Ulcer Treatment

Diabetic foot ulcers (DFUs) are one of the most prevalent complications associated with diabetes mellitus. DFUs are chronic injuries that often lead to non-traumatic lower extremity amputations, due to persistent infection and other ulcer-related side effects. Moreover, these complications represent a significant economic burden for the healthcare system, as expensive medical interventions are required. In addition to this, the clinical treatments that are currently available have only proven moderately effective, evidencing a great need to develop novel strategies for the improved treatment of DFUs. Hydrogels are three-dimensional systems that can be fabricated from natural and/or synthetic polymers. Due to their unique versatility, tunability, and hydrophilic properties, these materials have been extensively studied for different types of biomedical applications, including drug delivery and tissue engineering applications. Therefore, this review paper addresses the most recent advances in hydrogel wound dressings for effective DFU treatment, providing an overview of current perspectives and challenges in this research field.

Angiogenic Effect of a Nanoniosomal Deferoxamine-Loaded Poly(vinyl alcohol)-Egg White Film as a Promising Wound Dressing

Owing to the noticeable increase in the number of patients with impaired wound healing capabilities, developing bioactive wound dressings with supportive physicomechanical and biological properties for clinical wound management has attracted much more attention nowadays. In this regard, engineered dressings with angiogenesis potential are vital for accelerated tissue regeneration. In the current study, nanoniosomal deferoxamine (DFO)-loaded transparent films of egg white-poly(vinyl alcohol) (PVA/EW/ND) were successfully fabricated at three different PVA/EW ratios (1:0, 1:1, and 1:1.5 wt/wt %) through the thin film hydration and solvent casting methods. The developed films' characterizations were carried out using scanning electron microscopy, Fourier transform infrared spectroscopy analysis, uniaxial tensile strength, water uptake, water vapor transmission rate, in vitro degradation, and drug release. The results demonstrated that the various weight ratios of PVA/EW have a significant effect on the microscopic morphology, equilibrium swelling, degradation, and mechanical properties of the films. The drug release profile exhibited a sustained release of DFO with controlled burst-lag phases resembling the Korsmeyer-Peppas pattern. The cytotoxicity and adhesion analysis using human dermal fibroblasts displays the biocompatibility of the developed PVA/EW/ND films and the formation of cellular colonies on the surface. The in vitro angiogenic capability of the developed films evaluated by the scratch wound assay and microbead-assisted tube formation study showed a significant increase in the rate of migration of human umbilical vein endothelial cells and in the number of tube-like structures. Therefore, the achieved results suggest that the presented PVA/EW/ND film has promising potential for effective wound healing applications.

Angiogenesis Promotion by Combined Administration of DFO and Vein Endothelial Cells Using Injectable, Biodegradable, Nanocomposite Hydrogel Scaffolds

Desferrioxamine (DFO) upregulates HIF-1α and stimulates expression of vascular endothelial growth factor (VEGF), thereby accelerating neovascularization. As DFO acts primarily upon surrounding vein endothelial cells to stimulate angiogenesis, the angiogenic efficacy of DFO could be reduced in severely injured tissues lacking a sufficient number of vein endothelial cells. We hypothesized that combined administration of DFO and vein endothelial cells is a promising tissue engineering approach for promoting neovascularization. In this study, we evaluated the applicability of this approach using injectable, biocompatible, biodegradable nanocomposite gels consisting of poly(dl-lactide-co-glycolide)-b-polyethylene glycol-b-poly(dl-lactide-co-glycolide) (PLGA-PEG-PLGA) copolymers and clay nanoparticle LAPONITE. The nanocomposites exhibited irreversible thermo-gelation in the presence of DFO, and the mechanical strength was strongly affected by the amount of DFO. The storage moduli of the gels increased with increasing amount of DFO. These results indicate that the interaction between DFO and LAPONITE works as physical cross-linking points and facilitates the formation of the gel network. The nanocomposite gels achieved sustained slow release of DFO due to interactions between DFO and LAPONITE. Human umbilical vein endothelial cells (HUVECs) cultured on DFO-loaded nanocomposite gels exhibited a higher degree of vascular tube formation than cells cultured on nanocomposite gels without DFO. Moreover, the number of branching points and the diameter of the blood vessels regenerated in the gels significantly increased with increasing DFO amount, indicating that DFO released from the gels facilitates vascular tube-forming capacity. As a proof of concept, we demonstrate that the combined administration of DFO and vein endothelial cells using nanocomposite gels promotes greater angiogenesis than DFO administration alone using the same gels by in vivo experiments, confirming the validity of our hypothesis. Considering the multiple advantages of nanocomposite gels with regard to potential vascularization capacity, certain biocompatibility, biodegradability, and injectable cell- and drug-delivery capacity, we concluded that the nanocomposite gels have potential utility as scaffolding biomaterials for vascularization in tissue engineering applications.

Sprayable Hydrogel for Biomedical Applications

Polymeric hydrogels have extraordinary potential to be utilized for biomedical applications. Recently, sprayable hydrogels have received increasing attention for their biocompatibility, degradability, tunable mechanical properties and rapid spray-filming abilities. In...

Collagen/Chitosan Gels Cross-Linked with Genipin for Wound Healing in Mice with Induced Diabetes

Diabetes mellitus continues to be one of the most common diseases often associated with diabetic ulcers. Chitosan is an attractive biopolymer for wound healing due to its biodegradability, biocompatibility, mucoadhesiveness, low toxicity, and hemostatic effect. A panel of hydrogels based on chitosan, collagen, and silver nanoparticels were produced to treat diabetic wounds. The antibacterial activity, cytotoxicity, swelling, rheological properties, and longitudinal sections of hydrogels were studied. The ability of the gels for wound healing was studied in CD1 mice with alloxan-induced diabetes. Application of the gels resulted in an increase in VEGF, TGF-b1, IL-1b, and TIMP1 gene expression and earlier wound closure in a comparison with control untreated wounds. All gels increased collagen deposition, hair follicle repair, and sebaceous glands formation. The results of these tests show that the obtained hydrogels have good mechanical properties and biological activity and have potential applications in the field of wound healing. However, clinical studies are required to compare the efficacy of the gels as animal models do not reproduce full diabetes pathology.

Nanotechnology-based therapeutic applications: in vitro and in vivo clinical studies for diabetic wound healing

Diabetic wounds often indicate chronic complications that are difficult to treat. Unfortunately, existing conventional treatment modalities often cause unpremeditated side effects, given the need to develop alternative therapeutic phenotypes that are safe or have minimal side effects and risks. Nanotechnology-based platforms, including nanotherapeutics, nanoparticles (NPs), nanofibers, nanohydrogels, and nanoscaffolds, have garnered attention for their groundbreaking potential to decipher the biological environment and offer personalized treatment methods for wound healing. These nanotechnology-based platforms can successfully overcome the impediments posed by drug toxicity, existing treatment modalities, and the physiology and complexity of the wound sites. Furthermore, studies have shown that they play an essential role in influencing angiogenesis, collagen production, and extracellular matrix (ECM) synthesis, which are integral in skin repair mechanisms. In this review, we emphasized the importance of various nanotechnology-based platforms for healing diabetic wounds and report on the innovative preclinical and clinical outcomes of different nanotechnology-based platforms. This review also outlined the limitations of existing conventional treatment modalities and summarized the physiology of acute and chronic diabetic wounds.

Cellulose-Based Nanofibril Composite Materials as a New Approach to Fight Bacterial Infections

Antibiotic resistant microorganisms have become an enormous global challenge, and are predicted to cause hundreds of millions of deaths. Therefore, the search for novel/alternative antimicrobial agents is a grand global challenge. Cellulose is an abundant biopolymer with the advantages of low cost, biodegradability, and biocompatibility. With the recent growth of nanotechnology and nanomedicine, numerous researchers have investigated nanofibril cellulose to try to develop an anti-bacterial biomaterial. However, nanofibril cellulose has no inherent antibacterial activity, and therefore cannot be used on its own. To empower cellulose with anti-bacterial properties, new efficient nanomaterials have been designed based on cellulose-based nanofibrils as potential wound dressings, food packaging, and for other antibacterial applications. In this review we summarize reports concerning the therapeutic potential of cellulose-based nanofibrils against various bacterial infections.

Electrospun Fibers Improving Cellular Respiration via Mitochondrial Protection

Cellular respiration is the prerequisite for cell survival and functions, and mitochondrial function and microcirculation oxygen supply are essential for cellular respiration. However, in diabetic fracture, cellular respiration of bone marrow stem cells (BMSCs) is disrupted because of the dysfunction of mitochondria and microcirculation disorders. Here, the electrospun fibers of GelMA loaded with Hif-1 pathway activator (DFO) are constructed to improve the cellular respiration of BMSCs via protecting mitochondrial function and reconstructing microcirculation. The sequential process of electrospinning and UV crosslinking endowed the electrospun fibers with breathability and the biomechanical properties like the periosteum. In vitro biomolecular experiments showed that by crosslinking grafted polyethylene glycol acrylate liposomes loaded with DFO, the functional electrospun fibers can release DFO locally to activate Hif-1 in BMSCs, which can regulate the balance of Bcl-2/Bax to protect mitochondria and upregulate the expression of VEGF to reconstruct microcirculation. Animal experiments confirmed that the functional electrospun fibers can promote the recovery of diabetic fracture in vivo. These suggested that the functional electrospun fibers can improve cellular respiration for cell survival and functions of BMSCs. This study provides a new treatment strategy for diabetic fracture and other tissue regeneration on basis of cellular respiration improvement.

Modulating degradation of sodium alginate/bioglass hydrogel for improving tissue infiltration and promoting wound healing

More and more studies have recognized that the nanosized pores of hydrogels are too small for cells to normally grow and newly formed tissue to infiltrate, which impedes tissue regeneration. Recently, hydrogels with macropores and/or controlled degradation attract more and more attention for solving this problem. Sodium alginate/Bioglass (SA/BG) hydrogel, which has been reported to be an injectable and bioactive hydrogel, is also limited to be used as tissue engineering scaffolds due to its nanosized pores. Therefore, in this study, degradation of SA/BG hydrogel was modulated by grafting deferoxamine (DFO) to SA. The functionalized grafted DFO-SA (G-DFO-SA) was used to form G-DFO-SA/BG injectable hydrogel. In vitro degradation experiments proved that, compared to SA/BG hydrogel, G-DFO-SA/BG hydrogel had a faster mass loss and structural disintegration. When the hydrogels were implanted subcutaneously, G-DFO-SA/BG hydrogel possessed a faster degradation and better tissue infiltration as compared to SA/BG hydrogel. In addition, in a rat full-thickness skin defect model, wound healing studies showed that, G-DFO-SA/BG hydrogel significantly accelerated wound healing process by inducing more blood vessels formation. Therefore, G-DFO-SA/BG hydrogel can promote tissue infiltration and stimulate angiogenesis formation, which suggesting a promising application potential in tissue regeneration.

Functional hydrogels for diabetic wound management

Diabetic wounds often have a slow healing process and become easily infected owing to hyperglycemia in wound beds. Once planktonic bacterial cells develop into biofilms, the diabetic wound becomes more resistant to treatment. Although it remains challenging to accelerate healing in a diabetic wound due to complex pathology, including bacterial infection, high reactive oxygen species, chronic inflammation, and impaired angiogenesis, the development of multifunctional hydrogels is a promising strategy. Multiple functions, including antibacterial, pro-angiogenesis, and overall pro-healing, are high priorities. Here, design strategies, mechanisms of action, performance, and application of functional hydrogels are systematically discussed. The unique properties of hydrogels, including bactericidal and wound healing promotive effects, are reviewed. Considering the clinical need, stimuli-responsive and multifunctional hydrogels that can accelerate diabetic wound healing are likely to form an important part of future diabetic wound management.

An Integrated Smart Sensor Dressing for Real-Time Wound Microenvironment Monitoring and Promoting Angiogenesis and Wound Healing

Prolonged chronic wound healing not only places great stress on patients but also increase the health care burden. Fortunately, the emergence of tissue-engineered dressings has provided a potential solution for these patients. Recently, the relationship between the wound microenvironment and wound healing has been gradually clarified. Therefore, the state of wounds can be roughly ascertained by monitoring the microenvironment in real time. Here, we designed a three-layer integrated smart dressing, including a biomimetic nanofibre membrane, microenvironment sensor and β-cyclodextrin-containing gelatine methacryloyl (GelMA + β-cd) UV-crosslinked hydrogel. The hydrogel helped increase the expression of vascular endothelial growth factor (VEGF) through hypoxia-inducible factor-1α (HIF-1α) to promote neovascularization and wound healing. The microenvironment sensor, combined with the biological dressings, exhibited satisfactory measurement accuracy, stability, durability and biocompatibility. A BLE4.0 antenna was used to receive, display and upload wound microenvironment data in real time. Such integrated smart dressings can not only achieve biological functions but also monitor changes in the wound microenvironment in real time. These dressings can overcome the challenge of not knowing the state of the wound during the healing process and provide support for clinical work.