Hierarchical Macroporous Agarose Materials with Polyethyleneimine-Assisted Multiple Boronate Affinity Binding Sites for the Separation of Neomycin

Quantification of neomycin residues in food samples demands an efficient purification platform. Herein, hierarchical macroporous agarose monoliths with multiple boronate affinity sites were established for selective separation of neomycin. The silica core was synthesized by "one-step" Stöber procedures followed by modification with amino group and incorporation of polyethyleneimine. A versatile macroporous agarose monolith was prepared by emulsification strategies and functionalized with epoxy groups. After introducing polyethyleneimine-integrated silica nanoparticles onto the agarose monolith, fluorophenylboronic acids were immobilized. The physical and chemical characteristics of the composite monolith were analyzed systematically. After optimization, neomycin showed high binding ability of 23.69 mg/g, and the binding capacity can be manipulated by changing the pH and adding monosaccharides. The composite monolith was subsequently utilized to purify neomycin from the spiked model aquatic products followed by high-performance liquid chromatography analysis, which revealed a remarkable neomycin purification effect, indicating the great potential in the separation of neomycin from complicated aquatic products.

Glycan-selective in-situ growth of thermoresponsive polymers for thermoprecipitation and enrichment of N-glycoprotein/glycopeptides

In view of the biological significance and micro-heterogeneity of protein glycosylation for human health, specific enrichment of N-glycosylated proteins/peptides from complex biological samples is a prerequisite for the discovery of disease biomarkers and clinical diagnosis. In this work, we propose a "grafting-from" N-glycoprotein enriching method based on the in-situ growth of thermoresponsive polymer brushes from the N-glycosylated site of proteins. The initiator was first attached to the pre-oxidized glycan moieties by hydrazide chemistry, from which the thermoresponsive polymers can be grown to form giant protein-polymer conjugates (PPC). The thermosensitive PPC can be precipitated and separated by raising the temperature to above its lower critical solubility temperature (LCST). Mass spectrometry verified 210 N-glycopeptides corresponding to 136 N-glycoproteins in the rabbit serum. These results demonstrate the capability of the tandem thermoprecipitation strategy to enrich and separate N-glycoprotein/glycopeptide. Due to its simplicity and efficiency specifically, this method holds the potential for identifying biomarkers from biological samples in N-glycoproteome analysis.

Recent development and application of membrane chromatography

Membrane chromatography is mainly used for the separation and purification of proteins and biological macromolecules in the downstream processing process, also applications in sewage disposal. Membrane chromatography is recognized as an effective alternative to column chromatography because it significantly improves chromatography from affinity, hydrophobicity, and ion exchange; the development status of membrane chromatography in membrane matrix and membrane equipment is thoroughly discussed, and the applications of protein capture and intermediate purification, virus, monoclonal antibody purification, water treatment, and others are summarized. This review will provide value for the exploration and potential application of membrane chromatography.

Polyamidoamine dendrimer-assisted 3-carboxybenzoboroxole-functionalized magnetic nanoparticles for highly efficient capture of trace cis-diol-containing biomacromolecules

Boronate affinity materials have attracted more and more attention in recent years due to their highly selective capture of cis-diol-containing biomacromolecules.

Highly efficient separation and enrichment of polyphenols by 6-aminopyridine-3-boronic acid-functionalized magnetic nanoparticles assisted by polyethylenimine

Polyphenols have found a lot of therapeutic effects and potential applications such as antioxidant, anti-inflammatory, mutant resistance, immunosuppressant and anti-tumor properties. They can be divided into five main classes, namely flavonoids, phenolic acids, stilbenes, lignans, and others. Thus, the content detection of polyphenols in real samples such as fruit juice and tea is of great significance. Due to the presence of complex interfering components in actual samples, separation and enrichment of polyphenols prior to analysis is key. Therefore, it is quite necessary to establish a simple, low-cost and efficient purification method for cis-diol-containing polyphenols from real samples. Boronate affinity materials are able to reversibly bind cis-diol-containing compounds by forming a five- or six-membered boronic cyclic ester in aqueous media. However, conventional boronate affinity materials exhibited low binding capacity and high binding pH. In this study, the polyethyleneimine (PEI)-assisted 6-aminopyridine-3-boronic acid functionalized magnetic nanoparticles (MNPs) were developed to capture efficiently cis-diol-containing polyphenols under neutral condition. PEI was applied as a scaffold to amplify the number of boronic acid moieties. While 6-aminopyridine-3-boronic acid was used as an affinity ligand due to low pK_a value and excellent water solubility toward polyphenols. The results indicated that the prepared boronic acid-functionalized MNPs provided high binding capacity and fast binding kinetics under neutral conditions. In addition, the obtained MNPs exhibited relatively high binding affinity (K_d ≈ 10⁻⁴ M), low binding pH (pH ≥ 6.0) and tolerance of the interference of abundant sugars.

Synthesis routes of 6-aminopyridine-3-boronic acid-functionalized magnetic nanoparticles assisted by polyethylenimine (Fe₃O₄@PEI@PYBA).

The molecular imprinting of magnetic nanoparticles with boric acid affinity for the selective recognition and isolation of glycoproteins

A strategy was designed for the molecular imprinting of magnetic nanoparticles with boric acid affinity (MNPs@MIP) which were then used for the selective recognition and isolation of glycoproteins. Fe₃O₄ nanoparticles were prepared by a solvothermal method and direct silanization by the condensation polymerization of aminopropyltriethoxysilane (APTES). Subsequently, phenylboric acid was functionalized by reductive amination between 2,3-difluoro-4-formyl phenylboric acid (DFFPBA) and the amido group. The resultant Fe₃O₄@SiO₂–DFFPBA was then used for the selective adsorption of a glycoprotein template. Finally, a molecularly imprinted layer was covered on the surface nanoparticles by the condensation polymerization of tetraethyl orthosilicate (TEOS). The adsorption capacities of the resultant MNPs@MIP–HRP and MNPs@MIP–OVA to horseradish peroxidase (HRP) or ovalbumin (OVA) were significantly higher than non-imprinted particles (MNPs@NIP). Moreover, the adsorption capacities of MNPs@MIP–HRP and MNPs@MIP–OVA on non-template protein and non-glycoprotein bovine serum albumin (BSA) were significantly lower than those of their respective template proteins, thus indicating that both of the prepared MNPs@MIP exhibited excellent selectivity.

A strategy was designed for the preparation of molecular imprinting of magnetic nanoparticles with boric acid affinity (MNPs@MIP), and the resultant MNPs@MIP exhibited excellent selectivity for template glycoproteins.

6-Aminopyridine-3-boronic acid functionalized magnetic nanoparticles for highly efficient enrichment of cis-diol-containing biomolecules

Boronate affinity materials, as efficient sorbents for extraction, separation and enrichment of cis-diol-containing biomolecules, have attracted more and more attention in recent years. However, conventional boronate affinity materials require a basic binding pH (usually 8.5), which gives rise to not only inconvenience in operation but also the risk of degradation of labile compounds, and suffer from low binding affinity, which make the extraction of cis-diol-containing compounds of low concentration difficult or impossible. In order to reduce the binding pH to neutral or acidic conditions and improve binding affinity, we present a type of material, 6-aminopyridine-3-boronic acid functionalized magnetic nanoparticles, with affinity towards cis-diol-containing biomolecules. 6-Aminopyridine-3-boronic acid, exhibiting low binding pH, high affinity and excellent water solubility toward cis-diol-containing compounds, was first employed as an affinity ligand. The result indicated that the boronate affinity MNPs exhibited low binding pH (5.0) and high binding affinity toward cis-diol-containing biomolecules. Such a property enabled the selective extraction of cis-diol-containing biomolecules with low concentration under neutral or acidic conditions. This feature greatly favored the selective enrichment of cis-diol-containing biomolecules with low concentration from real samples. The feasibility for practical applications was demonstrated with the selective enrichment of cis-diol-containing biomolecules with low concentration in a human urine sample.

Poly-l-lysine-functionalized magnetic graphene for the immobilized metal affinity purification of histidine-rich proteins

Metal affinity-poly-l-lysine functionalization on a magnetic graphene substrate for simultaneously improving the adsorption selectivity toward histidine-rich proteins and inhibiting the non-specific adsorption.

Fluorescent molecularly imprinted nanoparticles with boronate affinity for selective glycoprotein detection

Specific recognition and sensing of glycoproteins are of great importance in clinical diagnostics considering their frequent utilization as biomarkers and therapeutic targets. In this work, a biomimetic fluorescent sensor for the selective and sensitive detection of glycoprotein was developed, which was based on late-model boronate fluorescent molecularly imprinted nanoparticles (B-FMIP NPs). The B-FMIP NPs were fabricated via the macromolecular assembly of a fluorescent photo-crosslinkable amphiphilic copolymer containing boronic acid with glycoprotein in aqueous solution and in situ photo-crosslinking. Due to the synergism of boronate affinity and the molecular imprinting effect, the resultant B-FMIP NPs demonstrated specific recognition and remarkable selectivity toward the template glycoprotein (ovalbumin, OVA) with a high imprinted factor (α) of 6.0 and gave rise to obvious fluorescence quenching after binding with OVA in water. Under optimized experimental conditions, the as-prepared B-FMIP NPs exhibited linearity over the OVA concentration range of 10^-13 to 10^-3 mg mL^-1 with a detection limit of 3.3 × 10^-14 mg mL^-1, as well as a rapid response time (about 10 min), which was superior to that of other previously reported OVA sensors. Finally, these B-FMIP NPs have been applied for the determination of OVA in real samples.

Preparation of bottlebrush polymer-modified magnetic graphene as immobilized metal ion affinity adsorbent for purification of hemoglobin from blood samples

An immobilized metal affinity (IMA) adsorbent was prepared by grafting bottlebrush polymer pendant with iminodiacetic acid (IDA) from the surface of polydopamine (PDA)-coated magnetic graphene oxide (magGO), via surface-initiated atom transfer radical polymerization (SI-ATRP). Poly(hydroxyethyl methacrylate) (PHEMA) was grafted firstly from the PDA-coated magGO as the backbone, and then poly(glycidyl methacrylate) was grafted from the PHEMA chains via the second SI-ATRP to afford the bottlebrush polymer-grafted magGO Thereafter, IDA was anchored on the nanocomposites to produce the IMA adsorbent after chelating copper ions. The adsorbent was characterized by various physical and physicochemical methods. Its adsorption properties were evaluated by using histidine-rich proteins (bovine hemoglobin, BHb) and other proteins (lysozyme and cytochrome-C). The results show that its maximum adsorption capacity to BHb was 378.6 mg g^-1, and the adsorption equilibrium can be quickly reached within 1 h. The adsorbent has excellent reproducibility and reusability. It has been applied to selectively purify hemoglobin from human whole blood, indicating its potential in practical applications. Graphical abstract.

Gold nanoparticles enumeration with dark-field optical microscope for the sensitive glycoprotein sandwich assay

Protein glycosylation is an important post-translational modification and glycoproteins are associated with many crucial metabolic progresses of life. In order to detect glycoproteins sensitively, we propose a gold nanoparticles (GNPs) enumeration method based on boronate affinity sandwich system, which is constructed between the boronic acid polymer functionalized magnetic nanoparticles (Fe₃O₄@MPS@VPBA NPs) and 4-mercaptophenylboronic acid modified GNPs (GNPs-MPBA) by the targeted glycoproteins as the linker. Therefore, the sandwich complex is formed, resulting in the decrease of GNPs-MPBA counts in the solution. Based on the dark-field microscope (DFM) imaging technique, the sensitive GNPs enumeration assay is developed for glycoproteins quantitation. Immunoglobulin (IgG), as one of the important glycoproteins, is introduced to evaluate the proposed method. A low detection limit of 1.22 ng mL^-1 for IgG analysis is obtained. The result indicates that the proposed GNPs enumeration method offers a simple, effective, label-free and highly sensitive strategy without signal amplification. It also possesses great potential for various target molecules determination at the single-particle level in the future.

The fabrication of dendrimeric phenylboronic acid-functionalized magnetic graphene oxide nanoparticles with excellent adsorption performance for the separation and purification of horseradish peroxidase

A dendrimeric phenylboronic acid-affinitive magnetic graphene oxide nanoparticle was synthesized and used to separate and purify HRP.

Thermoregulated extraction of luteolin under neutral conditions using oligo(ethylene glycol)-based magnetic nanoparticles with Wulff-type boronate affinity

Oligo(ethylene glycol)-based thermoresponsive polymers with Wulff-type boronate affinity were anchored on magnetic nanoparticles. The resultant magnetic nanoparticles were used as sorbents for extracting luteolin, a cis-diol-containing model analyte. By exploiting the thermoresponsive properties and Wulff-type boronate affinity of the sorbents, target adsorption at room temperature (25 °C) and target release at high temperature (40 °C) were achieved under neutral conditions without pH alteration. The proposed thermoregulated extraction method was favorable for automated boronate affinity extraction, preventing degradation of the target and avoiding acidic elution for breaking Wulff-type boronate sites. Compared to reported sorbents for extracting luteolin, the sorbents possessed higher maximum adsorption capacity (98.7 mg g^-1) with acceptable sensitivity, simplified operation procedure, and mild extraction condition. Furthermore, the sorbents were applied in thermoregulated extraction of luteolin from honey samples. Satisfactory recoveries in the range of 83.2% - 89.1% with RSD ranging from 2.2% to 4.6% were achieved. The results demonstrated that this work provided a new research direction to design and synthesize efficient thermoresponsive materials for recognition and release of cis-diol compounds under neutral conditions.

Ultra-Stable Silica Nanoparticles as Nano-Plugging Additive for Shale Exploitation in Harsh Environments

Owing to the harsh downhole environments, poor dispersion of silica at high salinity and high temperature can severely restrict its application as the nano-plugging agent in shale gas exploitation. The objective of this study is to improve salt tolerance and thermal stability of silica. Herein, silica was successfully functionalized with an anionic polymer (p SPMA) by SI-ATRP (surface-initiated atom transfer radical polymerization), named SiO2-g-SPMA. The grafted pSPMA brushes on silica provided sufficient electrostatic repulsion and steric repulsion for stabilizing silica in a harsh environment. The modified silica (SiO2-g-SPMA) had excellent colloidal stability at salinities up to 5.43 M NaCl (saturated brine) and standard API brine (8 wt% NaCl + 2 wt% CaCl2) for 30 days at room temperature. Simultaneously, the SiO2-g-SPMA was stable at 170 °C for 24 h as well as stable in weakly alkali environment. Furthermore, the plugging performance of SiO2-g-SPMA in water-based drilling fluids for low permeate reservoir reached to 78.25% when adding a small amount of 0.5 wt% SiO2-g-SPMA, which effectively hindered the water invasion into formation and protected the reservoir.

Preparation of Boronic Acid-Functionalized Silica Nanocomposites for Selective Enrichment of Glycoproteins

A facile method was developed for synthesis of boronic acid-functionalized silica nanocomposites (SiO₂ -BA) by 'thiol-ene' click reaction, where silica nanoparticles were synthesized by using tetraethoxysilane (TEOS) and γ-mercaptopropyl trimethoxysilane (γ-MPTS) as precursors. The morphology and structure properties of the resultant SiO₂ -BA were characterized by transmission electronic microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and Brunner-Emmet-Teller measurements (BET). The adsorption behavior of the SiO₂ -BA for glycoproteins was evaluated. Under the optimized conditions, the SiO₂ -BA exhibited higher adsorption capacity towards glycoproteins (ovalbumin, OVA, 7.64 μmol/g) than non-glycoproteins (bovine serum albumin, BSA, 0.83 μmol/g). In addition, the practicality of the SiO₂ -BA was further assessed by selective enrichment of glycoproteins from egg white samples.

Polymer grafting on graphene layers by controlled radical polymerization

In situ controlled radical polymerization (CRP) is considered as an important approach to graft polymer brushes with controlled grafting density, functionality, and thickness on graphene layers. Polymers are tethered with chain end or through its backbone to the surface or edge of graphene layers with two in situ polymerization methods of "grafting from" and "grafting through" and also a method based on coupling reactions known as "grafting to". The "grafting from" method relies on the propagation of polymer chains from the surface- or edge-attached initiators. The "grafting through" method is based on incorporation of double bond-modified graphene layers into polymer chains through the propagation reaction. The "grafting to" technique involves attachment of pre-fabricated polymer chains to the graphene substrate. Here, physical and chemical attachment approaches are also considered in polymer-modification of graphene layers. Combination of CRP mechanisms of reversible activation, degenerative (exchange) chain transfer, atom transfer, and reversible chain transfer with various kinds of grafting reactions makes it possible to selectively functionalize graphene layers. The main aim of this review is assessment of the recent advances in the field of preparation of polymer-grafted graphene substrates with well-defined polymers of controlled molecular weight, thickness, and polydispersity index. Study of the opportunities and challenges for the future works in controlling of grafting density, site-selectivity in grafting, and various topologies of the brushes with potential applications in stimuli-responsive surfaces, polymer composites, Pickering emulsions, coating technologies, and sensors is also considered.

Boronic acid-functionalized agarose affinity chromatography for isolation of tropomyosin in fishes

BACKGROUND

Tropomyosin is now receiving increasing attention because of its significant allergenic activity in various fishery products but its simple and effective isolation still remains a challenging task.

RESULTS

An agarose-based boronate affinity chromatography was produced for the first time to isolate tropomyosin in various fishery products using 3,5-difluoro-4-formyl-phenylboronic acid as the functional monomer, tris(2-aminoethyl)amine as the multi-branched ligand, and agarose gel particles as supporting materials. The agarose concentration, binding pH, and the concentration of elution buffers demonstrated significant effects on separation performance. Under optimized conditions, the purity of the isolated tropomyosin was higher than 90%, with the column adsorption capacity over 1.85 mg mL^-1 and the enrichment efficiency over 65%. Such efficiency was also validated with different fish samples including Paralichthys olivaceus, Thunnusthynnus, Oreochromis spp., and Lophius litulon.

CONCLUSION

In comparison with conventional methods, the established affinity chromatography demonstrated excellent biocompatibility (without involving any organic solvent), better speed (from at least 1-2 days to 3-4 h), and simplicity (from at least five steps to three steps). This suggests that it is a novel and promising technique for the isolation of tropomyosin and other glycoproteins (including most allergens) in foodstuffs. © 2019 Society of Chemical Industry.

Boron-titanate monolayer nanosheets for highly selective adsorption of immunoglobulin G

Boron-titanate monolayer nanosheets were prepared through a scalable step by step intercalation approach for anchoring 3-mercaptopropyltriethoxysilane (MPTS) on the surface. MPTS provides clickable sites with 4-vinylphenylboronic acid (VPBA) via a thiol-ene (TE) click reaction to obtain monolayer titanate nanosheets with boronic acid ligands immobilized on the surface. The nanosheets obtained are denoted as VPBA-MPTS-TiNSs, with a lateral dimension of a few dozen nanometers and with a thickness of ca. 3.5 nm. The nanosheets exhibit a superior adsorption capacity of 1669.7 mg g-1 and favorable selectivity for the adsorption of glycoproteins by employing immunoglobulin G (IgG) as the protein model. The adsorbed IgG is thereafter readily collected by using 0.1% (m/v) cetane trimethyl ammonium bromide (CTAB) as the eluent. The practical applications of VPBA-MPTS-TiNSs are further demonstrated by the selective adsorption/purification of IgG from human serum.

A Temperature-Responsive Boronate Core Cross-Linked Star (CCS) Polymer for Fast and Highly Efficient Enrichment of Glycoproteins

Fast and highly efficient enrichment and separation of glycoproteins is essential in many biological applications, but the lack of materials with high capture capacity, fast, and efficient enrichment/separation makes it a challenge. Here, a temperature-responsive core cross-linked star (CCS) polymer with boronate affinity is reported for fast and efficient enriching and separating of glycoproteins from biological samples. The temperature-responsive CCS polymers containing boronic acid in its polymeric arms and poly(N-isopropyl acrylamide) in its cross-linked core are prepared using reversible addition-fragmentation chain transfer polymerization via an "arm-first" methodology. The soluble boronate polymeric arms of the CCS polymers provide a homogeneous reaction system and facilitate interactions between boronic acid and glycoproteins, which leads to a fast binding/desorption speed and high capture capacity. Maximum binding capacity of the prepared CCS polymer for horseradish peroxidase is determined to be 210 mg g^-1 , which can be achieved within 20 min. More interestingly, the temperature-responsive CCS polymers exhibit rapid reversible thermal-induced volume phase transition by increasing the temperature from 15 to 30 °C, resulting in a facile and convenient sample collection and recovery for the target glycoproteins. Finally, the temperature-responsive CCS polymer is successfully applied to enrichment of low abundant glycoproteins.

Graphene-based advanced nanoplatforms and biocomposites from environmentally friendly and biomimetic approaches

Environmentally friendly and biomimetic approaches to fabricate graphene-based advanced nanoplatforms and biocomposites for biomedical applications are summarized in this review.

Branched polyethyleneimine-assisted 3-carboxybenzoboroxole improved Wulff-type boronic acid functionalized magnetic nanoparticles for the specific capture of cis-diol-containing flavonoids under neutral conditions

Flavonoids have shown a variety of biological activities such as antimicrobial, antibacterial, antifungal, antiviral, antiinflammatory, antitumor, antiatherogenic, and antihyperglycemic activities. A lot of important flavonoids contain cis-diols such as rutin (Ru), quercetin (Qu), luteolin (Lu), myricetin (Myr) and baicalein (Ba) and so on. It is necessary to establish a simple, low-cost and efficient purification method for cis-diol-containing flavonoids from plant extracts. Boronate affinity materials are able to reversibly bind the cis-diols via boronic acids by forming a five- or six-membered boronic cyclic ester in aqueous media. However, conventional boronate affinity materials have to be used in alkaline media, which can lead to the oxidation of cis-diols in compounds. In this study, the polyethyleneimine (PEI)-assisted 3-carboxybenzoboroxole-functionalized magnetic nanoparticles (MNPs) were prepared to achieve efficient capture of cis-diol-containing flavonoids under neutral conditions. Branched PEI was applied as a scaffold to amplify the number of boronic acid moieties, while 3-carboxybenzoboroxole, exhibiting high affinity and excellent water solubility toward flavonoids, was used as an affinity ligand. The prepared boronate affinity MNPs exhibited high binding capacity and fast binding kinetics (equilibrium in 3 min) under neutral conditions. In addition, the obtained boronate affinity MNPs exhibited high binding affinity (K_d ≈ 10⁻⁴ M), low binding pH (pH ≥ 6.0) and tolerance of the interference to abundant sugars.

Flavonoids have shown a variety of biological activities such as antimicrobial, antibacterial, antifungal, antiviral, antiinflammatory, antitumor, antiatherogenic, and antihyperglycemic activities.

A facile and general approach for the preparation of boronic acid-functionalized magnetic nanoparticles for the selective enrichment of glycoproteins

Biomedical applications and biomarkers for early clinical diagnostics and the treatment of diseases demand efficient and selective enrichment platforms for glycoproteins.

Preparation of salbutamol imprinted magnetic nanoparticles via boronate affinity oriented surface imprinting for the selective analysis of trace salbutamol residues

Salbutamol (SAL) is one of the most widely abused feed additives in animal husbandry.

Metal affinity-carboxymethyl cellulose functionalized magnetic graphene composite for highly selective isolation of histidine-rich proteins

A metal affinity-carboxymethyl cellulose functionalized magnetic graphene, namely MGCI-Cu composite, was prepared by successive modifications of graphene oxide nanosheets with magnetic nanoparticles, carboxymethyl cellulose (CMC), iminodiacetic acid (IDA) and then chelated with copper ions. The successful modifications of the graphene surface were demonstrated by various characterizations, and a high density of 6.17 μmol m^-2 for metal affinity groups was obtained. The composite exhibited high adsorption selectivity toward histidine-rich proteins. The adsorption was governed by strong metal affinity binding force between hisitidine residues of proteins and immobilized Cu²⁺ ions of MGCI-Cu composite. In particular, highly selective isolation of hemoglobin (Hb) was achieved in 0.2 mol L^-1 phosphate buffer at pH 8. The adsorption capacity of Hb significantly increased to 769 mg g^-1 in comparison to that of 435 mg g^-1 on metal affinity modified magnetic graphene composite (MGI-Cu) without CMC modification. The adsorbed Hb molecules were recovered with a carbonate buffer (0.2 mol L^-1 pH 10) containing 0.5 mol L^-1 imidazole. MGCI-Cu composite displayed favorable reusability for at least four times after regeneration of the composite by edetic acid (EDTA) and Cu²⁺ solution. The practical applications demonstrated that MGCI-Cu composite could highly selectively isolate Hb from human whole blood and polyhistidine-tagged recombinant protein from Escherichia coli (E. coli) lysate.

PEGylated titanate nanosheets: hydrophilic monolayers with a superior capacity for the selective isolation of immunoglobulin G

A novel organic-inorganic hybrid was prepared by anchoring (3-aminopropyl)triethoxysilane (APTES) on the surface of monolayer titanate nanosheets and subsequent modification with hydrophilic polyethylene glycol (PEG). The PEGylated hydrophilic monolayer titanate nanosheets were abbreviated as PEG-APTES-TiNSs, and they exhibit a lateral dimension of dozens of nanometers and a thickness of ca. 1.9 nm. PEGylation of the titanate nanosheets significantly improved their selectivity toward the adsorption of glycoproteins through strong hydrophilic interaction, providing an adsorption capacity of 2540.9 mg g-1 for immunoglobulin G (IgG). The retained IgG is readily collected at a recovery rate of 83.4% with 0.5% (m/v) ammonium hydroxide (NH4OH) as the stripping reagent. PEG-APTES-TiNSs are applied for the selective adsorption of IgG from human serum, which is further confirmed by SDS-PAGE assay.

Branched polyethyleneimine-assisted boronic acid-functionalized silica nanoparticles for the selective enrichment of trace glycoproteins

Boronate affinity materials have attracted more and more attention in extraction, separation and enrichment of glycoproteins due to the important roles that glycoproteins take on in recent years. However, conventional boronate affinity materials suffer from low binding affinity mainly because of the use of single boronic acids. This makes the extraction of glycoproteins of trace concentration become rather difficult or impossible. Here we present a novel boronate avidity material, polyethyleneimine (PEI)-assisted boronic acid-functionalized silica nanoparticles (SNPs). Branched PEI was applied as a scaffold to amplify the number of boronic acid moieties. While 3-carboxybenzoboroxole, exhibiting high affinity and excellent water solubility toward glycoproteins, was used as an affinity ligand. Due to the PEI-assisted synergistic multivalent binding, the boronate avidity SNPs exhibited strong binding strength toward glycoproteins with dissociation constants of 10^-7 M, which was the highest among reported boronic acid-functionalized materials that can be applied for glycoproteomic analysis. Such a high avidity enabled the selective extraction of trace glycoproteins as low as 0.4 pg/mL. This feature greatly favored the selective enrichment of trace glycoproteins from real samples. Meanwhile, the boronate avidity SNPs was tolerant of the interference of abundant sugars. In addition, the PEI-assisted boronate avidity SNPs exhibited high binding capacity and low binding pH. The feasibility for practical applications was demonstrated with the selective enrichment of trace glycoproteins in human saliva.

Boronic acid-functionalized iron oxide magnetic nanoparticles via distillation–precipitation polymerization and thiol–yne click chemistry for the enrichment of glycoproteins

Synthesis of phenylboronic acid functionalized iron oxide nanoparticles for glycoprotein enrichment via distillation–precipitation polymerization combined with thiol–yne click chemistry.

Synthesis of magnetic molecularly imprinted nanoparticles with multiple recognition sites for the simultaneous and selective capture of two glycoproteins

Magnetic molecularly imprinted nanoparticles with multiple recognition sites were prepared, which exhibited excellent selectivity for two glycoproteins simultaneously.

Efficient synthesis of riboflavin-imprinted magnetic nanoparticles by boronate affinity-based surface imprinting for the selective recognition of riboflavin

Riboflavin (vitamin B2), a cis-diol-containing compound, is an essential vitamin for maintaining human health mainly in energy metabolism and is a critical component of enzyme cofactors and flavoproteins.

Pursuing extreme sensitivity for determination of endogenous brassinosteroids through direct fishing from plant matrices and eliminating most interferences with boronate affinity magnetic nanoparticles

Brassinosteroids (BRs) are important plant hormones regulating plant growth and development. High-performance analytical methods for quantifying endogenous BRs are important for studying the molecular mechanisms of BR action. Herein we developed a high-performance sample pretreatment method based on boronate affinity magnetic nanoparticles (BAMNPs). The high specificity of boronate affinity enables direct fishing of BRs from plant matrices. The strong binding energy makes it possible to remove most contaminants in plant matrices with a small loss of target BRs. Besides these advantages, the novel two-step oxidation-hydrolysis elution system raised BR recoveries to 70.5%-98.2%, which was much higher than other boronate affinity applications. The high cleanliness of the final eluents lowered the matrix effects to 85.2%-92.4%. As a result, this method enables simultaneously good recoveries of endogenous BRs and thorough removal of matrix interferences, which greatly improves the sensitivity of BR analysis and reduces the use of plant materials for routine analysis to <10 mg. In addition, the sample handling time can be shortened to <3 h due to the operating convenience of BAMNPs and their easy separation from plant powders. Based on these advantages of BAMNP solid phase extraction, the organ-specific BR distribution analysis in Arabidopsis and rice tissues demonstrates excellent sensitivity, good reproducibility and high throughput of the method. Graphical abstract A high-sensitivity and time-saving UPLC-MS/MS-based quantification method for brassinosteroids (BRs) was developed through directly fishing BRs from plant matrices and eliminating most matrix interferences with as-prepared boronate affinity magnetic nanoparticles (BAMNPs).