Homonuclear/Heteronuclear Bimetallic Conjugated Coordination Polymers with Customized Oxygen Evolution Pathway

The reasons for the generally superior performance of synergistic effects in bimetallic catalysts in the oxygen evolution reaction (OER) are not fully understood, largely due to the complexity of catalyst structures and the challenges associated with synthesizing long-range atomic ordering catalysts. In this study, we present a series of two-dimensional (2D) conjugated bimetallic coordination polymers (c-CPs) involving Co or Ni with unambiguous and nearly identical geometry structures for the electrocatalysis of OER, which are highly suitable for discussions on structure-property correlations. The heteronuclear CoNi-PI unexpectedly alters the OER catalytic mechanisms from adsorbate evolution mechanism those observed in homonuclear CoCo-PI and NiNi-PI to the kinetically faster oxide path mechanism, exhibiting high stability and an ultralow overpotential of 282 mV even at 100 mA cm-2 with a Tafel slope of approximately 42 mV dec-1. This study presents an extremely rare crystalline heteronuclear bimetallic catalyst with excellent catalytic properties, promising significant influences in catalyst development research.

Chemical design of metal complexes for electrochemical water oxidation under acidic conditions

The development of viable, stable, and highly efficient molecular water oxidation catalysts under acidic aqueous conditions (pH < 7) is challenging with Earth-abundant metals in the field of renewable energy due to their low stability and catalytic activity. The utilization of these catalysts is generally considered more cost-effective and sustainable relative to conventional catalysts relying on precious metals such as ruthenium and iridium, which exhibit outstanding activities. Herein, we discussed the effectiveness of transition metal complexes for electrocatalytic water oxidation under acidic conditions. We focus on important aspects of 3d first-row metal complexes as they relate to the design of water oxidation systems and emphasize the importance of the fundamental coordination chemistry perspective in this field, which can be applied to the understanding of catalytic activity and fundamental structure-function relationships. Finally, we identified the scientific challenges that should be overcome for the future development and application of water oxidation electrochemical catalysts.

Honeycomb-Structured IrOx Foam Platelets as the Building Block of Anode Catalyst Layer in PEM Water Electrolyzer

Achieving robust long-term durability with high catalytic activity at low iridium loading remains one of great challenges for proton exchange membrane water electrolyzer (PEMWE). Herein, we report the low-temperature synthesis of iridium oxide foam platelets comprising edge-sharing IrO6 octahedral honeycomb framework, and demonstrate the structural advantages of this material for multilevel tuning of anodic catalyst layer across atomic-to-microscopic scales for PEMWE. The integration of IrO6 octahedral honeycomb framework, foam-like texture and platelet morphology into a single material system assures the generation and exposure of highly active and stable iridium catalytic sites for the oxygen evolution reaction (OER), while facilitating the reduction of both mass transport loss and electronic resistance of catalyst layer. As a proof of concept, the membrane electrode assembly in single-cell PEMWE based on honeycomb-structured IrOx foam platelets, with a low iridium loading (~0.3 mgIr/cm2), is demonstrated to exhibit high catalytic activity at ampere-level current densities and to remain stable for more than 2000 hours.

Mechanistic insights into multimetal synergistic and electronic effects in a hexanuclear iron catalyst with a [Fe3(μ3-O)(μ2-OH)]2 core for enhanced water oxidation

Multinuclear molecular catalysts mimicking natural photosynthesis have been shown to facilitate water oxidation; however, such catalysts typically operate in organic solutions, require high overpotentials and have unclear catalytic mechanisms. Herein, a bio-inspired hexanuclear iron(III) complex I, Fe6(μ3-O)2(μ2-OH)2(bipyalk)2(OAc)8 (H2bipyalk = 2,2'-([2,2'-bipyridine]-6,6'-diyl)bis(propan-2-ol); OAc = acetate) with desirable water solubility and stability was designed and used for water oxidation. Our results showed that I has high efficiency for water oxidation via the water nucleophilic attack (WNA) pathway with an overpotential of only ca. 290 mV in a phosphate buffer of pH 2. Importantly, key high-oxidation-state metal-oxo intermediates formed during water oxidation were identified by in situ spectroelectrochemistry and oxygen atom transfer reactions. Theoretical calculations further supported the above identification. Reversible proton transfer and charge redistribution during water oxidation enhanced the electron and proton transfer ability and improved the reactivity of I. Here, we have shown the multimetal synergistic and electronic effects of catalysts in water oxidation reactions, which may contribute to the understanding and design of more advanced molecular catalysts.

Non-Noble-Metal-Based Electrocatalysts for Acidic Oxygen Evolution Reaction: Recent Progress, Challenges, and Perspectives

The oxygen evolution reaction (OER) plays a pivotal role in diverse renewable energy storage and conversion technologies, including water electrolysis, electrochemical CO2 reduction, nitrogen fixation, and metal-air batteries. Among various water electrolysis techniques, proton exchange membrane (PEM)-based water electrolysis devices offer numerous advantages, including high current densities, exceptional chemical stability, excellent proton conductivity, and high-purity H2. Nevertheless, the prohibitive cost associated with Ir/Ru-based OER electrocatalysts poses a significant barrier to the broad-scale application of PEM-based water splitting. Consequently, it is crucial to advance the development of non-noble metal OER catalysis substance with high acid-activity and stability, thereby fostering their widespread integration into PEM water electrolyzers (PEMWEs). In this review, a comprehensive analysis of the acidic OER mechanism, encompassing the adsorbate evolution mechanism (AEM), lattice oxygen mechanism (LOM) and oxide path mechanism (OPM) is offered. Subsequently, a systematic summary of recently reported noble-metal-free catalysts including transition metal-based, carbon-based and other types of catalysts is provided. Additionally, a comprehensive compilation of in situ/operando characterization techniques is provided, serving as invaluable tools for furnishing experimental evidence to comprehend the catalytic mechanism. Finally, the present challenges and future research directions concerning precious-metal-free acidic OER are comprehensively summarized and discussed in this review.

Iridium Single-Atom-Ensembles Stabilized on Mn-Substituted Spinel Oxide for Durable Acidic Water Electrolysis

Exploring single-atom-catalysts for the acidic oxygen evolution reaction (OER) is of paramount importance for cost-effective hydrogen production via acidic water electrolyzers. However, the limited durability of most single-atom-catalysts and Ir/Ru-based oxides under harsh acidic OER conditions, primarily attributed to excessive lattice oxygen participation resulting in metal-leaching and structural collapse, hinders their practical application. Herein, an innovative strategy is developed to fabricate short-range Ir single-atom-ensembles (IrSAE) stabilized on the surface of Mn-substituted spinel Co3O4 (IrSAE-CMO), which exhibits excellent mass activity and significantly improved durability (degradation-rate: ≈2 mV h-1), outperforming benchmark IrO2 (≈44 mV h-1) and conventional Irsingle-atoms on pristine-Co3O4 for acidic OER. First-principle calculations reveal that Mn-substitution in the octahedral sites of Co3O4 substantially reduces the migration energy barrier for Irsingle-atoms on the CMO surface compared to pristine-Co3O4, facilitating the migration of Irsingle-atoms to form strongly correlated IrSAE during pyrolysis. Extensive ex situ characterization, operando X-ray absorption and Raman spectroscopies, pH-dependence activity tests, and theoretical calculations indicate that the rigid IrSAE with appropriate Ir-Ir distance stabilized on the CMO surface effectively suppresses lattice oxygen participation while promoting direct O─O radical coupling, thereby mitigating Ir-dissolution and structural collapse, boosting the stability in an acidic environment.

Stability of electrocatalytic OER: from principle to application

Hydrogen energy, derived from the electrolysis of water using renewable energy sources such as solar, wind, and hydroelectric power, is considered a promising form of energy to address the energy crisis. However, the anodic oxygen evolution reaction (OER) poses limitations due to sluggish kinetics. Apart from high catalytic activity, the long-term stability of electrocatalytic OER has garnered significant attention. To date, several research studies have been conducted to explore stable electrocatalysts for the OER. A comprehensive review is urgently warranted to provide a concise overview of the recent advancements in the electrocatalytic OER stability, encompassing both electrocatalyst and device developments. This review aims to succinctly summarize the primary factors influencing OER stability, including morphological/phase change and electrocatalyst dissolution, as well as mechanical detachment, alongside chemical, mechanical, and operational degradation observed in devices. Furthermore, an overview of contemporary approaches to enhance stability is provided, encompassing electrocatalyst design (structural regulation, protective layer coating, and stable substrate anchoring) and device optimization (bipolar plates, gas diffusion layers, and membranes). Hopefully, more attention will be paid to ensuring the stable operation of electrocatalytic OER and the future large-scale water electrolysis applications. This review presents design principles aimed at addressing challenges related to the stability of electrocatalytic OER.

Supramolecular interaction of a molecular catalyst with a polymeric carbon nitride photoanode enhances photoelectrochemical activity and stability at neutral pH

Polymeric carbon nitride (CN) emerged as an alternative, metal-free photoanode material for water-splitting photoelectrochemical cells (PECs). However, the performance of CN photoanodes is limited due to the slow charge separation and water oxidation kinetics due to poor interaction with water oxidation catalysts (WOCs). Moreover, operation under benign, neutral pH conditions is rarely reported. Here, we design a porous CN photoanode connected to a highly active molecular Ru-based WOC, which also acts as an additional photo-absorber. We show that the strong interaction between the π-system of the heptazine units within the CN with the CH groups of the WOC's equatorial ligand enables a strong connection between them and an efficient electronic communication path. The optimized photoanode exhibits a photocurrent density of 180 ± 10 μA cm-2 at 1.23 V vs. the reversible hydrogen electrode (RHE) with 89% faradaic efficiency for oxygen evolution with turnover numbers (TONs) in the range of 3300 and a turnover frequency (TOF) of 0.4 s-1, low onset potential, extended incident photon to current conversion, and good stability up to 5 h. This study may lead to the integration of molecular catalysts and polymeric organic absorbers using supramolecular interactions.

Designing neighboring-site activation of single atom via tunnel ions for boosting acidic oxygen evolution

Realizing an efficient turnover frequency in the acidic oxygen evolution reaction by modifying the reaction configuration is crucial in designing high-performance single-atom catalysts. Here, we report a "single atom-double site" concept, which involves an activatable inert manganese atom redox chemistry in a single-atom Ru-Mn dual-site platform with tunnel Ni ions as the trigger. In contrast to conventional single-atom catalysts, the proposed configuration allows direct intramolecular oxygen coupling driven by the Ni ions intercalation effect, bypassing the secondary deprotonation step instead of the kinetically sluggish adsorbate evolution mechanism. The strong bonding of Ni ions activates the inert manganese terminal groups and inhibits the cross-site disproportionation process inherent in the Mn scaffolding, which is crucial to ensure the dual-site platform. As a result, the single-atom Ru-Ni-Mn octahedral molecular sieves catalyst delivers a low overpotential, adequate mass activity and good stability.

Structural modification of nickel tetra(thiocyano)corroles during electrochemical water oxidation

In this study, we present two fully characterized nickel tetrathiocyanocorroles, representing a novel class of 3d-metallocorroles. These nickel(II) ions form square planar complexes, exhibiting a d8-electronic configuration. These anionic complexes are stabilized by the electron-withdrawing SCN groups on the bipyrrole unit of the corrole. The reduced aromaticity in these anionic nickel(II) corrole complexes is evidenced by single crystal X-ray diffraction (XRD) data and a markedly altered absorption profile, with stronger Q bands compared to Soret bands. Notably, the UV-Vis and electrochemical data exhibit significant differences from previously reported nickel(II) corrole radical cation and nickel(II) porphyrin complexes. While these electrochemical data bear a resemblance to those of the anionic nickel(II) corrole by Gross et al., the UV-Vis data show substantial distinctions. Additionally, we explore the utilization of nickel(II)-corrole@CC (where CC denotes carbon cloth) as an electrocatalyst for the oxygen evolution reaction (OER) in an alkaline medium. During electrochemical water oxidation, the molecular catalyst is partially converted to nickel (oxy)hydroxide, Ni(O)OH. The structure reveals the coexistence of the molecular complex and Ni(O)OH in the active catalyst, achieving a turnover frequency (TOF) of 3.32 × 10-2 s-1. The synergy between the homogeneous and heterogeneous phases improves the OER activity, providing more active sites and edge sites and enhancing interfacial charge transfer.

Effect of Anchoring Dynamics on Proton-Coupled Electron Transfer in the Ru(bda) Coordination Oligomer on a Graphitic Surface

The oligomeric ruthenium-based water oxidation catalyst, Ru(bda), is known to be experimentally anchored on graphitic surfaces through CH-π stacking interactions between the auxiliary bda ([2,2'-bipyridine]-6,6'-dicarboxylate) ligand bonded to ruthenium and the hexagonal rings of the surface. This anchoring provides control over their molecular coverage and enables efficient catalysis of water oxidation to dioxygen. The oligomeric nature of the molecule offers multiple anchoring sites at the surface, greatly enhancing the overall stability of the hybrid catalyst-graphitic surface anode through dynamic bonding. However, the impact of this dynamic anchoring on the overall catalytic mechanism is still a topic of debate. In this study, a crucial proton-coupled electron transfer event in the catalytic cycle is investigated using DFT-based molecular dynamics simulations plus metadynamics. The CH-π stacking anchoring plays a critical role not only in stabilizing this hybrid system but also in facilitating the proton-coupled electron transfer event with possible vibronic couplings between the anchoring bonds motion and charge fluctuations at the catalyst - graphitic surface interface. Furthermore, this computational investigation displays the presence of a quartet spin state intermediate that can lead to the experimentally observed and thermodynamically more stable doublet spin state.

Strain-Triggered Distinct Oxygen Evolution Reaction Pathway in Two-Dimensional Metastable Phase IrO2 via CeO2 Loading

A strain engineering strategy is crucial for designing a high-performance catalyst. However, how to control the strain in metastable phase two-dimensional (2D) materials is technically challenging due to their nanoscale sizes. Here, we report that cerium dioxide (CeO2) is an ideal loading material for tuning the in-plane strain in 2D metastable 1T-phase IrO2 (1T-IrO2) via an in situ growth method. Surprisingly, 5% CeO2 loaded 1T-IrO2 with 8% compressive strain achieves an overpotential of 194 mV at 10 mA cm-2 in a three-electrode system. It also retained a high current density of 900 mA cm-2 at a cell voltage of 1.8 V for a 400 h stability test in the proton-exchange membrane device. More importantly, the Fourier transform infrared measurements and density functional theory calculation reveal that the CeO2 induced strained 1T-IrO2 directly undergo the *O-*O radical coupling mechanism for O2 generation, totally different from the traditional adsorbate evolution mechanism in pure 1T-IrO2. These findings illustrate the important role of strain engineering in paving up an optimal catalytic pathway in order to achieve robust electrochemical performance.

Non-coordinating counteranion as a powerful tool to tune the activity of copper water oxidation catalysts

Ten copper-bipyridine-type catalysts, [(bpyR)Cu(OH)2]2+, featuring diverse counteranions (OAc-, Cl-, SO42-, NO3-, OTf-) were synthesized. The observed substantial variations in turnover frequency (TOF) among these catalysts, coupled with insights gained from electrochemical investigations, underscore the pivotal influence of counteranions in fine-tuning the catalytic activity of metal complexes during water oxidation. The TOF value follows the trend of OAc- > Cl- > SO42- > NO3- > OTf-, which is the same as the change of coordinating ability index, a™. Density Functional Theory (DFT) calculations reveal that counteranion coordination plays an important role in influencing the catalytic performance of these complexes.

An MgO passivation layer and hydrotalcite derived spinel Co2AlO4 synergically promote photoelectrochemical water oxidation conducted using BiVO4-based photoanodes

MxCo3-xO4 co-catalysed photoanodes with high potential for improvement in PEC water-oxidizing properties are reported. However, it is difficult to control the recombination of photogenerated carriers at the interface between the catalyst and cocatalyst. Here, an ultra-thin MgO passivation layer was introduced into the MxCo3-xO4/BiVO4 coupling system to construct a ternary composite photoanode Co2AlO4/MgO/BiVO4. The photocurrent density of the electrode is 3.52 mA cm-2, which is 3.2 times that of BiVO4 (at 1.23 V vs. RHE). The photocurrent is practically increased by 0.86 mA cm-2 and 1.56 mA cm-2 in comparison with that of Co2AlO4/BiVO4 and MgO/BiVO4 electrodes, respectively. Meanwhile, the Co2AlO4/MgO/BiVO4 electrode has the highest charge separation efficiency, the lowest charge transfer resistance (Rct) and best stability. The excellent PEC performance could be attributed to the inhibitive effect provided by the MgO passivation layer that efficaciously suppresses the electron-hole recombination at the interface and drives the hole transfer outward, which is induced by Co2AlO4 to capture the electrode/electrolyte interface for efficient water oxidation reaction. In order to understand the origin of this improvement, first-principles calculations with density functional theory (DFT) were performed. The theoretical investigation converges to our experimental results. This work proposes a novel idea for restraining the recombination of photogenerated carriers between interfaces and the rational design of efficient photoanodes.

Removing the Barrier in O-O Bond Formation Via the Combination of Intramolecular Radical Coupling and the Oxide Relay Mechanism

The Ru(tda) catalyst has been a major milestone in the development of molecular water oxidation catalysts due to its outstanding performance at neutral pH. The role of the noncoordinating carboxylate group is to act as a nucleophile, donating an oxygen atom to the oxo group, thereby acting as an oxide relay (OR) mechanism for O-O bond formation. A substitution of the carboxylates for phosphonate groups has been proposed, resulting in the Ru(tPaO) catalyst, which has shown even more efficient performance in experimental characterization. In this study, we explore the feasibility of the OR mechanism in the newly reported Ru(tPaO) molecular catalyst. We investigated the catalytic cycle using density functional theory and identified a variation of the OR mechanism that involves radical oxygen atoms in O-O bond formation. We have also determined that the subsequent hydroxide nucleophilic attack is the sole rate-limiting step in the catalytic cycle. All activation free energies are very low, with a free-energy barrier of 2.1 kcal/mol for O-O bond formation and 4.2 kcal/mol for OH- nucleophilic attack.

Tetranuclear CoII4O4 Cubane Complex: Effective Catalyst Toward Electrochemical Water Oxidation

The reaction of Co(OAc)2·6H2O with 2,2'-[{(1E,1'E)-pyridine-2,6-diyl-bis(methaneylylidene)bis(azaneylylidene)}diphenol](LH2) a multisite coordination ligand and Et3N in a 1:2:3 stoichiometric ratio forms a tetranuclear complex Co4(L)2(μ-η1:η1-OAc)2(η2-OAc)2]· 1.5 CH3OH· 1.5 CHCl3 (1). Based on X-ray diffraction investigations, complex 1 comprises a distorted Co4O4 cubane core consisting of two completely deprotonated ligands [L]2- and four acetate ligands. Two distinct types of CoII centers exist in the complex, where the Co(2) center has a distorted octahedral geometry; alternatively, Co(1) has a distorted pentagonal-bipyramidal geometry. Analysis of magnetic data in 1 shows predominant antiferromagnetic coupling (J = -2.1 cm-1), while the magnetic anisotropy is the easy-plane type (D1 = 8.8, D2 = 0.76 cm-1). Furthermore, complex 1 demonstrates an electrochemical oxygen evolution reaction (OER) with an overpotential of 325 mV and Tafel slope of 85 mV dec-1, required to attain a current density of 10 mA cm-2 and moderate stability under alkaline conditions (pH = 14). Electrochemical impedance spectroscopy studies reveal that compound 1 has a charge transfer resistance (Rct) of 2.927 Ω, which is comparatively lower than standard Co3O4 (5.242 Ω), indicating rapid charge transfer kinetics between electrode and electrolyte solution that enhances higher catalytic activity toward OER kinetics.

Weakened Interfacial Hydrogen Bond Connectivity Drives Selective Photocatalytic Water Oxidation toward H2O2 at Water/Brookite-TiO2 Interface

The formation of H2O2 through the two-electron photocatalytic water oxidation reaction (WOR) is significant but encounters the competition with the four-electron O2 evolution reaction. Recent studies showed a crystal-phase dependence in H2O2 selectivity, where high purity brookite TiO2 (b-TiO2) exhibits remarkable H2O2 selectivity in contrast to the common rutile phase TiO2 (r-TiO2). However, the origin of such a structure-induced selectivity preference remains elusive, primarily due to the complexities associated with the solid-liquid interface system and excited-state chemistry. Herein, we conducted a comprehensive investigation into the selectivity mechanism of WOR at the water/b-TiO2(210) and water/r-TiO2(110) interfaces, employing first-principles molecular dynamics simulations and microkinetic analyses. Intriguingly, our results reveal that the intrinsic catalytic ability of the b-TiO2(210) itself does not enhance H2O2 selectivity compared to r-TiO2(110). Instead, it is the weakened interfacial hydrogen bond connectivity, modulated by the herringbone-like local atomic structure of the b-TiO2(210) surface, that determines the selectivity. Specifically, this weakened H-bond connectivity (i.e., local low water density) at the interface, owing to the strong water adsorption and distinct adsorption orientation, can stabilize the OH• radical and inhibit its deprotonation, leading to an improved H2O2 selectivity. By contrast, the relatively strong interface H-bond connectivity established over r-TiO2(110) accelerates the deprotonation of OH•, with the OH• coverage being 3 orders of magnitude lower than at the water/b-TiO2(210) interface. This study quantitatively demonstrates that the local H-bond structure (water density) at the liquid/solid interface significantly influences photocatalytic selectivity, and this insight may offer a rational approach to enhance the H2O2 selectivity.

Surface engineering for stable electrocatalysis

In recent decades, significant progress has been achieved in rational developments of electrocatalysts through constructing novel atomistic structures and modulating catalytic surface topography, realizing substantial enhancement in electrocatalytic activities. Numerous advanced catalysts were developed for electrochemical energy conversion, exhibiting low overpotential, high intrinsic activity, and selectivity. Yet, maintaining the high catalytic performance under working conditions with high polarization and vigorous microkinetics that induce intensive degradation of surface nanostructures presents a significant challenge for commercial applications. Recently, advanced operando and computational techniques have provided comprehensive mechanistic insights into the degradation of surficial functional structures. Additionally, various innovative strategies have been devised and proven effective in sustaining electrocatalytic activity under harsh operating conditions. This review aims to discuss the most recent understanding of the degradation microkinetics of catalysts across an entire range of anodic to cathodic polarizations, encompassing processes such as oxygen evolution and reduction, hydrogen reduction, and carbon dioxide reduction. Subsequently, innovative strategies adopted to stabilize the materials' structure and activity are highlighted with an in-depth discussion of the underlying rationale. Finally, we present conclusions and perspectives regarding future research and development. By identifying the research gaps, this review aims to inspire further exploration of surface degradation mechanisms and rational design of durable electrocatalysts, ultimately contributing to the large-scale utilization of electroconversion technologies.

Small Organic Molecular Electrocatalysts for Fuels Production

In recent years, heterocyclic organic compounds have been explored as molecular electrocatalysts in relevant reactions for energy conversion and storage. Merging mimetics of biological systems that perform hydride transfer with rational synthetic chemical design has opened many opportunities for organic molecules to be tuned at the atomic level conferring them interesting reactivities. These molecular electrocatalysts represent an alternative to traditional metallic materials and metal complexes employed for water oxidation, hydrogen production, and carbon dioxide reduction. This minireview describes recent reports concerning design, catalytic activity and the mechanism of synthetic molecular electrocatalysts towards solar fuels production.

Molecular Selectivity in the Binding of Alkali Metals, Alkaline Earth Metals, First-Row Transition Metals, and Lanthanides with Cyclic Depsipeptides

Beauvericin (BEA) and enniatins (ENN) are cyclic hexadepsipeptide mycotoxins known for their ionophoric activities across cell membranes. While their ability to selectively bind alkali ions to form binary complexes has been studied, their interaction with multivalent metal ions to form higher-order complexes remains less explored. We report the unique characteristics of the 1:2, Mn+:BEA or ENN complexes with monovalent, divalent, and trivalent metal ions. A thorough IMS-MS analysis underscores the substantial interplay among ionic radii, coordination numbers, and their impact on conformational selection within higher-order complexes that is pertinent to ion transport. Transition metals offer insights into the effects of ion radii and ligand side chains on conformational selection, while lanthanide complexes enable a direct evaluation of coordination chemistry. An intriguing finding concerning the lanthanide complexes involves an unexpected C-H bond activation, wherein water ligands may catalyze the deprotonation of the cyclic peptides.

Porous Electropolymerized Films of Ruthenium Complex: Photoelectrochemical Properties and Photoelectrocatalytic Synthesis of Hydrogen Peroxide

The photoelectrochemical cells (PECs) performing high-efficiency conversions of solar energy into both electricity and high value-added chemicals are highly desirable but rather challenging. Herein, we demonstrate that a PEC using the oxidatively electropolymerized film of a heteroleptic Ru(II) complex of [Ru(bpy)(L)2](PF6)2Ru1 {bpy and L stand for 2,2'-bipyridine and 1-phenyl-2-(4-vinylphenyl)-1H-imidazo[4,5-f][1,10]phenanthroline respectively}, polyRu1, as a working electrode performed both efficient in situ synthesis of hydrogen peroxide and photocurrent generation/switching. Specifically, when biased at -0.4 V vs. saturated calomel electrode and illuminated with 100 mW·cm-2 white light, the PEC showed a significant cathodic photocurrent density of 9.64 μA·cm-2. Furthermore, an increase in the concentrations of quinhydrone in the electrolyte solution enabled the photocurrent polarity to switch from cathodic to anodic, and the anodic photocurrent density reached as high as 11.4 μA·cm-2. Interestingly, in this single-compartment PEC, the hydrogen peroxide yield reached 2.63 μmol·cm-2 in the neutral electrolyte solution. This study will serve as a guide for the design of high-efficiency metal-complex-based molecular systems performing photoelectric conversion/switching and photoelectrochemical oxygen reduction to hydrogen peroxide.

Robust Molecular Anodes for Electrocatalytic Water Oxidation Based on Electropolymerized Molecular Cu Complexes

A multistep synthesis of a new tetra-amidate macrocyclic ligand functionalized with alkyl-thiophene moieties, 15,15-bis(6-(thiophen-3-yl)hexyl)-8,13-dihydro-5H-dibenzo[b,h][1,4,7,10]tetraazacyclotridecine-6,7,14,16(15H,17H)-tetraone, H4 L, is reported. The reaction of the deprotonated ligand, L4- , and Cu(II) generates the complex [LCu]2- , that can be further oxidized to Cu(III) with iodine to generate [LCu]- . The H4 L ligand and their Cu complexes have been thoroughly characterized by analytic and spectroscopic techniques (including X-ray Absorption Spectroscopy, XAS). Under oxidative conditions, the thiophene group of [LCu]2- complex polymerizes on the surface of graphitic electrodes (glassy carbon disks (GC), glassy carbon plates (GCp ), carbon nanotubes (CNT), or graphite felts (GF)) generating highly stable thin films. With CNTs deposited on a GC by drop casting, hybrid molecular materials labeled as GC/CNT@p-[LCu]2- are obtained. The latter are characterized by electrochemical techniques that show their capacity to electrocatalytically oxidize water to dioxygen at neutral pH. These new molecular anodes achieve current densities in the range of 0.4 mA cm-2 at 1.30 V versus NHE with an onset overpotential at ≈250 mV. Bulk electrolysis experiments show an excellent stability achieving TONs in the range of 7600 during 24 h with no apparent loss of catalytic activity and maintaining the molecular catalyst integrity, as evidenced by electrochemical techniques and XAS spectroscopy.

Pentanuclear iron complex for water oxidation: spectroscopic analysis of reactive intermediates in solution and catalyst immobilization into the MOF-based photoanode

Photoelectrochemical water splitting can produce green hydrogen for industrial use and CO2-neutral transportation, ensuring the transition from fossil fuels to green, renewable energy sources. The iron-based electrocatalyst [FeII4FeIII(μ-3-O)(μ-L)6]3+ (LH = 3,5-bis(2-pyridyl)pyrazole) (1), discovered in 2016, is one of the fastest molecular water oxidation catalysts (WOC) based on earth-abundant elements. However, its water oxidation reaction mechanism has not been yet fully elucidated. Here, we present in situ X-ray spectroscopy and electron paramagnetic resonance (EPR) analysis of electrochemical water oxidation reaction (WOR) promoted by (1) in water-acetonitrile solution. We observed transient reactive intermediates during the in situ electrochemical WOR, consistent with a coordination sphere expansion prior to the onset of catalytic current. At a pre-catalytic (~+1.1 V vs. Ag/AgCl) potential, the distinct g~2.0 EPR signal assigned to FeIII/FeIV interaction was observed. Prolonged bulk electrolysis at catalytic (~+1.6 V vs. Ag/AgCl) potential leads to the further oxidation of Fe centers in (1). At the steady state achieved with such electrolysis, the formation of hypervalent FeV=O and FeIV=O catalytic intermediates was inferred with XANES and EXAFS fitting, detecting a short Fe=O bond at ~1.6 Å. (1) was embedded into MIL-126 MOF with the formation of (1)-MIL-126 composite. The latter was tested in photoelectrochemical WOR and demonstrated an improvement of electrocatalytic current upon visible light irradiation in acidic (pH=2) water solution. The presented spectroscopic analysis gives further insight into the catalytic pathways of multinuclear systems and should help the subsequent development of more energy- and cost-effective catalysts of water splitting based on earth-abundant metals. Photoelectrocatalytic activity of (1)-MIL-126 confirms the possibility of creating an assembly of (1) inside a solid support and boosting it with solar irradiation towards industrial applications of the catalyst.

Relation Between Bond Angle and Carbon-Oxygen Stretching Frequencies in CO2-Containing Compounds

The symmetric (νs) and antisymmetric (νas) O-C-O stretching modes of CO2-containing compounds encode structural information that can be difficult to decipher, due to the sensitivity of these spectral features to small shifts in charge distribution and structure, as well as the anharmonicities of these two vibrational modes. In this work, we discuss the relation between the frequency of these modes and the geometry of the O-C-O group, showing that the splitting between νs and νas (Δνas-s = νas - νs) can be predicted based only on the O-C-O bond angle obtained from quantum chemical calculations with reasonable accuracy (±46 cm-1, R2 = 0.994). The relationship is shown to hold for the infrared spectra of a variety of CO2-containing molecules measured in vacuo. The origins of this model are discussed in the framework of elementary mode analysis.

Locally Ordered Single-Atom Catalysts for Electrocatalysis

Single-atom catalysts manifest nearly 100 % atom utilization efficiency, well-defined active sites, and high selectivity. However, their practical applications are hindered by a low atom loading density, uncontrollable location, and ambiguous interaction with the support, thereby posing challenges to maximizing their electrocatalytic performance. To address these limitations, the ability to arrange randomly dispersed single atoms into locally ordered single-atom catalysts (LO-SACs) substantially influences the electronic effect between reactive sites and the support, the synergistic interaction among neighboring single atoms, the bonding energy of intermediates with reactive sites and the complexity of the mechanism. As such, it dramatically promotes reaction kinetics, reduces the energy barrier of the reaction, improves the performance of the catalyst and simplifies the reaction mechanism. In this review, firstly, we introduce a variety of compelling characteristics of LO-SACs as electrocatalysts. Subsequently, the synthetic strategies, characterization methods and applications of LO-SACs in electrocatalysis are discussed. Finally, the future opportunities and challenges are elaborated to encourage further exploration in this rapidly evolving field.

Reactivities and Electronic Structures of μ-1,2-Peroxo and μ-1,2-Superoxo CoIIICoIII Complexes: Electrophilic Reactivity and O2 Release Induced by Oxidation

Peroxo complexes are key intermediates in water oxidation catalysis (WOC). Cobalt plays an important role in WOC, either as oxides CoOx or as {CoIII(μ-1,2-peroxo)CoIII} complexes, which are the oldest peroxo complexes known. The oxidation of {CoIII(μ-1,2-peroxo)CoIII} complexes had usually been described to form {CoIII(μ-1,2-superoxo)CoIII} complexes; however, recently the formation of {CoIV(μ-1,2-peroxo)CoIII} species were suggested. Using a bis(tetradentate) dinucleating ligand, we present here the synthesis and characterization of {CoIII(μ-1,2-peroxo)(μ-OH)CoIII} and {CoIII(μ-OH)2CoIII} complexes. Oxidation of {CoIII(μ-1,2-peroxo)(μ-OH)CoIII} at -40 °C in CH3CN provides the stable {CoIII(μ-1,2-superoxo)(μ-OH)CoIII} species and activates electrophilic reactivity. Moreover, {CoIII(μ-1,2-peroxo)(μ-OH)CoIII} catalyzes water oxidation, not molecularly but rather via CoOx films. While {CoIII(μ-1,2-peroxo)(μ-OH)CoIII} can be reversibly deprotonated with DBU at -40 °C in CH3CN, {CoIII(μ-1,2-superoxo)(μ-OH)CoIII} undergoes irreversible conversions upon reaction with bases to a new intermediate that is also the decay product of {CoIII(μ-1,2-superoxo)(μ-OH)CoIII} in aqueous solution at pH > 2. Based on a combination of experimental methods, the new intermediate is proposed to have a {CoII(μ-OH)CoIII} core formed by the release of O2 from {CoIII(μ-1,2-superoxo)(μ-OH)CoIII} confirmed by a 100% yield of O2 upon photocatalytic oxidation of {CoIII(μ-1,2-peroxo)(μ-OH)CoIII}. This release of O2 by oxidation of a peroxo intermediate corresponds to the last step in molecular WOC.

Correlations between the Electronic Structure and Energetics of the Catalytic Steps in Homogeneous Water Oxidation Catalysis

The development of an efficient electrocatalyst for the water oxidation reaction is limited by unfavorable scaling relations between catalytic intermediates, resulting in an overpotential. In contrast to heterogeneous catalysts, the electronic structure of homogeneous catalysts can be modified to a great extent due to a tailored ligand design. However, studies utilizing the tunability of organic ligands have rarely been conducted in a systematic manner and, as of yet, have not produced catalytic paths that avoid the aforementioned unfavorable scaling relations. To investigate the influence of electron-donating groups (EDGs) or electron-withdrawing groups (EWGs) on elementary steps in electrochemical water oxidation catalysis, cis-[Ru(bpy)2(H2O)]2+ (bpy = 2,2'-bipyridine) was selected as the scaffold that was modified with methyl, methoxy, chloro, and trifluoromethyl groups. This catalyst can undergo several electron transfer (ET), proton transfer (PT), and proton-coupled electron transfer (PCET) steps that were all probed experimentally. In this systematic study, it was found that PCET steps are relatively insensitive with respect to the presence of EDGs or EWGs, while the decoupled ET and PT steps are more heavily affected. However, the influence of the substituents decreases with an increasing oxidation state of Ru due to a lack of d-electrons available at the Ru center for π-backbonding to the bipyridine ligand. Therefore, the RuV/VI redox couple appears to be relatively unaffected by the substituent. Nevertheless, the implementation of EWGs can shift all oxidation events to a very narrow potential window. Not only do our findings illustrate how electronic substituents affect the entire potential energy landscape of the catalytic water oxidation reaction, but they also show that the cis-[Ru(bpy)2(H2O)]2+ compounds follow different design rules and scaling relations, as has been reported for every other oxygen evolution catalyst thus far.

Fe(III) Docking-Activated Sites in Layered Birnessite for Efficient Water Oxidation

Non-noble metal catalysts for promoting the sluggish kinetics of oxygen evolution reaction (OER) are essential to efficient water splitting for sustainable hydrogen production. Birnessite has a local atomic structure similar to that of an oxygen-evolving complex in photosystem II, while the catalytic activity of birnessite is far from satisfactory. Herein, we report a novel Fe-Birnessite (Fe-Bir) catalyst obtained by controlled Fe(III) intercalation- and docking-induced layer reconstruction. The reconstruction dramatically lowers the OER overpotential to 240 mV at 10 mA/cm² and the Tafel slope to 33 mV/dec, making Fe-Bir the best of all the reported Bir-based catalysts, even on par with the best transition-metal-based OER catalysts. Experimental characterizations and molecular dynamics simulations elucidate that the catalyst features active Fe(III)-O-Mn(III) centers interfaced with ordered water molecules between neighboring layers, which lower reorganization energy and accelerate electron transfer. DFT calculations and kinetic measurements show non-concerted PCET steps conforming to a new OER mechanism, wherein the neighboring Fe(III) and Mn(III) synergistically co-adsorb OH* and O* intermediates with a substantially reduced O-O coupling activation energy. This work highlights the importance of elaborately engineering the confined interlayer environment of birnessite and more generally, layered materials, for efficient energy conversion catalysis.

A bioinspired cobalt catalyst based on a tripodal imidazole/pyridine platform capable of water reduction and oxidation

The prototypical drug carrier [Co^II(L¹)Cl]PF₆ (1), where L¹ is a tripodal amine bound to pyridine and methyl-imidazoles, had its electrocatalytic water splitting activity studied under different pH conditions. This species contains a high-spin 3d⁷ Co^II metal center, and is capable of generating both H₂ from water reduction and O₂ from water oxidation_. Turnover numbers reach 390 after 3 h for water reduction. Initial water oxidation activity is molecular, with TONs of 71 at pH 7 and 103 at pH 11.5. The results reveal that species 1 can undergo several redox transformations, including reduction to the 3d⁸ Co^I species that precedes a ^LS3d⁶ hydride for water reduction, as well as nominal Co^IVO and Co^III-OOH species required for water oxidation. Post-catalytic analyses confirm the molecular nature of reduction and support initial molecular activity for oxidation.

Electrolyte Engineering Stabilizes Photoanodes Decorated with Molecular Catalysts

Molecular catalysts are promising oxygen evolution promoters in conjunction with photoanodes for solar water splitting. Maintaining the stability of both photoabsorber and cocatalyst is still a prime challenge, with many efforts tackling this issue through sophisticated material designs. Such approaches often mask the importance of the electrode-electrolyte interface and overlook easily tunable system parameters, such as the electrolyte environment, to improve efficiency. We provide a systematic study on the activity-stability relationship of a prominent Fe₂ O₃ photoanode modified with Ir molecular catalysts using in situ mass spectroscopy. After gaining detailed insights into the dissolution behavior of the Ir cocatalyst, a comprehensive pH study is conducted to probe the impact of the electrolyte on the performance. An inverse trend in Fe and Ir stability is found, with the best activity-stability synergy obtained at pH 9.7. The results bring awareness to the overall photostability and electrolyte engineering when advancing catalysts for solar water splitting.

Green Energy by Hydrogen Production from Water Splitting, Water Oxidation Catalysis and Acceptorless Dehydrogenative Coupling

In this review, we want to explain how the burning of fossil fuels is pushing us towards green energy. Actually, for a long time, we have believed that everything is profitable, that resources are unlimited and there are no consequences. However, the reality is often disappointing. The use of non-renewable resources, the excessive waste production and the abandonment of the task of recycling has created a fragile thread that, once broken, may never restore itself. Metaphors aside, we are talking about our planet, the Earth, and its unique ability to host life, including ourselves. Our world has its balance; when the wind erodes a mountain, a beach appears, or when a fire devastates an area, eventually new life emerges from the ashes. However, humans have been distorting this balance for decades. Our evolving way of living has increased the number of resources that each person consumes, whether food, shelter, or energy; we have overworked everything to exhaustion. Scientists worldwide have already said actively and passively that we are facing one of the biggest problems ever: climate change. This is unsustainable and we must try to revert it, or, if we are too late, slow it down as much as possible. To make this happen, there are many possible methods. In this review, we investigate catalysts for using water as an energy source, or, instead of water, alcohols. On the other hand, the recycling of gases such as CO2 and N2O is also addressed, but we also observe non-catalytic means of generating energy through solar cell production.

Characterization of Reaction Intermediates Involved in the Water Oxidation Reaction of a Molecular Cobalt Complex

Molecular cobalt(III) complexes of bis-amidate-bis-alkoxide ligands, (Me₄N)[Co^III(L₁)] (1) and (Me₄N)[Co^III(L₂)] (2), are synthesized and assessed through a range of characterization techniques. Electrocatalytic water oxidation activity of the Co complexes in a 0.1 M phosphate buffer solution revealed a ligand-centered 2e^-/1H⁺ transfer event at 0.99 V followed by catalytic water oxidation (WO) at an onset overpotential of 450 mV. By contrast, 2 reveals a ligand-based oxidation event at 0.9 V and a WO onset overpotential of 430 mV. Constant potential electrolysis study and rinse test experiments confirm the homogeneous nature of the Co complexes during WO. The mechanistic investigation further shows a pH-dependent change in the reaction pathway. On the one hand, below pH 7.5, two consecutive ligand-based oxidation events result in the formation of a Co^III(L^2-)(OH) species, which, followed by a proton-coupled electron transfer reaction, generates a Co^IV(L^2-)(O) species that undergoes water nucleophilic attack to form the O-O bond. On the other hand, at higher pH, two ligand-based oxidation processes merge together and result in the formation of a Co^III(L^2-)(OH) complex, which reacts with OH^- to yield the O-O bond. The ligand-coordinated reaction intermediates involved in the WO reaction are thoroughly studied through an array of spectroscopic techniques, including UV-vis absorption spectroscopy, electron paramagnetic resonance, and X-ray absorption spectroscopy. A mononuclear Co^III(OH) complex supported by the one-electron oxidized ligand, [Co^III(L^3-)(OH)]^-, a formal Co^IV(OH) complex, has been characterized, and the compound was shown to participate in the hydroxide rebound reaction, which is a functional mimic of Compound II of Cytochrome P450.

Effects of Novel Photosynthetic Inhibitor [CuL2]Br2 Complex on Photosystem II Activity in Spinach

The effects of the novel [CuL₂]Br₂ complex (L = bis{4H-1,3,5-triazino [2,1-b]benzothiazole-2-amine,4-(2-imidazole)}copper(II) bromide complex) on the photosystem II (PSII) activity of PSII membranes isolated from spinach were studied. The absence of photosynthetic oxygen evolution by PSII membranes without artificial electron acceptors, but in the presence of [CuL₂]Br₂, has shown that it is not able to act as a PSII electron acceptor. In the presence of artificial electron acceptors, [CuL₂]Br₂ inhibits photosynthetic oxygen evolution. [CuL₂]Br₂ also suppresses the photoinduced changes of the PSII chlorophyll fluorescence yield (F_V) related to the photoreduction of the primary quinone electron acceptor, Q_A. The inhibition of both characteristic PSII reactions depends on [CuL₂]Br₂ concentration. At all studied concentrations of [CuL₂]Br₂, the decrease in the F_M level occurs exclusively due to a decrease in Fv. [CuL₂]Br₂ causes neither changes in the F₀ level nor the retardation of the photoinduced rise in F_M, which characterizes the efficiency of the electron supply from the donor-side components to Q_A through the PSII reaction center (RC). Artificial electron donors (sodium ascorbate, DPC, Mn²⁺) do not cancel the inhibitory effect of [CuL₂]Br₂. The dependences of the inhibitory efficiency of the studied reactions of PSII on [CuL₂]Br₂ complex concentration practically coincide. The inhibition constant Ki is about 16 µM, and logKi is 4.8. As [CuL₂]Br₂ does not change the aromatic amino acids’ intrinsic fluorescence of the PSII protein components, it can be proposed that [CuL₂]Br₂ has no significant effect on the native state of PSII proteins. The results obtained in the present study are compared to the literature data concerning the inhibitory effects of PSII Cu(II) aqua ions and Cu(II)-organic complexes.

Metal-Corrole-Based Porous Organic Polymers for Electrocatalytic Oxygen Reduction and Evolution Reactions

Integrating molecular catalysts into designed frameworks often enables improved catalysis. Compared with porphyrin-based frameworks, metal-corrole-based frameworks have been rarely developed, although monomeric metal corroles are usually more efficient than porphyrin counterparts for the electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). We herein report on metal-corrole-based porous organic polymers (POPs) as ORR and OER electrocatalysts. M-POPs (M=Mn, Fe, Co, Cu) were synthesized by coupling metal 10-phenyl-5,15-(4-iodophenyl)corrole with tetrakis(4-ethynylphenyl)methane. Compared with metal corrole monomers, M-POPs displayed significantly enhanced catalytic activity and stability. Co-POP outperformed other M-POPs by achieving four-electron ORR with a half-wave potential of 0.87 V vs. RHE and reaching 10 mA cm^-2 OER current density at 340 mV overpotential. This work is unparalleled to develop and explore metal-corrole-based POPs as electrocatalysts.

Water Oxidation by Pentapyridyl Base Metal Complexes? A Case Study

The design of molecular water oxidation catalysts (WOCs) requires a rational approach that considers the intermediate steps of the catalytic cycle, including water binding, deprotonation, storage of oxidizing equivalents, O–O bond formation, and O₂ release. We investigated several of these properties for a series of base metal complexes (M = Mn, Fe, Co, Ni) bearing two variants of a pentapyridyl ligand framework, of which some were reported previously to be active WOCs. We found that only [Fe(Py5OMe)Cl]⁺ (Py5OMe = pyridine-2,6-diylbis[di-(pyridin-2-yl)methoxymethane]) showed an appreciable catalytic activity with a turnover number (TON) = 130 in light-driven experiments using the [Ru(bpy)₃]²⁺/S₂O₈^2– system at pH 8.0, but that activity is demonstrated to arise from the rapid degradation in the buffered solution leading to the formation of catalytically active amorphous iron oxide/hydroxide (FeOOH), which subsequently lost the catalytic activity by forming more extensive and structured FeOOH species. The detailed analysis of the redox and water-binding properties employing electrochemistry, X-ray absorption spectroscopy (XAS), UV–vis spectroscopy, and density-functional theory (DFT) showed that all complexes were able to undergo the M^III/M^II oxidation, but none was able to yield a detectable amount of a M^IV state in our potential window (up to +2 V vs SHE). This inability was traced to (i) the preference for binding Cl^– or acetonitrile instead of water-derived species in the apical position, which excludes redox leveling via proton coupled electron transfer, and (ii) the lack of sigma donor ligands that would stabilize oxidation states beyond M^III. On that basis, design features for next-generation molecular WOCs are suggested.

We scrutinize the water oxidation activity for pentapyridyl metal complexes [M^II(Py5R)Cl]⁺ (M = Mn, Fe, Co, Ni; R = OH, OMe). Analysis of their stability, redox, and water-binding properties shows that the complexes are not able to reach high-valent intermediate states and do not catalyze water oxidation in their molecular form.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Ruthenium containing molecular electrocatalyst on glassy carbon for electrochemical water splitting

Electrochemical water splitting constitutes one of the most promising strategies for converting water into hydrogen-based fuels, and this technology is predicted to play a key role in the transition towards a carbon-neutral energy economy. To enable the design of cost-effective electrolysis cells based on this technology, new and more efficient anodes with augmented water splitting activity and stability will be required. Herein, we report an active molecular Ru-based catalyst for electrochemically-driven water oxidation (overpotential of ∼395 mV at pH 7 phosphate buffer) and two simple methods for preparing anodes by attaching this catalyst onto glassy carbon through multi-walled carbon nanotubes to improve stability as well as reactivity. The anodes modified with the molecular catalyst were characterized by a broad toolbox of microscopy and spectroscopy techniques, and interestingly no RuO₂ formation was detected during electrocatalysis over 4 h. These results demonstrate that the herein presented strategy can be used to prepare anodes that rival the performance of state-of-the-art metal oxide anodes.

Oxygen Evolution Reaction in Energy Conversion and Storage: Design Strategies Under and Beyond the Energy Scaling Relationship

The oxygen evolution reaction (OER) is the essential module in energy conversion and storage devices such as electrolyzer, rechargeable metal-air batteries and regenerative fuel cells. The adsorption energy scaling relations between the reaction intermediates, however, impose a large intrinsic overpotential and sluggish reaction kinetics on OER catalysts. Developing advanced electrocatalysts with high activity and stability based on non-noble metal materials is still a grand challenge. Central to the rational design of novel and high-efficiency catalysts is the development and understanding of quantitative structure-activity relationships, which correlate the catalytic activities with structural and electronic descriptors. This paper comprehensively reviews the benchmark descriptors for OER electrolysis, aiming to give an in-depth understanding on the origins of the electrocatalytic activity of the OER and further contribute to building the theory of electrocatalysis. Meanwhile, the cutting-edge research frontiers for proposing new OER paradigms and crucial strategies to circumvent the scaling relationship are also summarized. Challenges, opportunities and perspectives are discussed, intending to shed some light on the rational design concepts and advance the development of more efficient catalysts for enhancing OER performance.

A Parent Iron Amido Complex in Catalysis of Ammonia Oxidation

Parent amido complexes are crucial intermediates in ammonia-based transformations. We report a well-defined ferric ammine system [Cp*Fe(1,2-Ph₂PC₆H₄NH)(NH₃)]⁺ ([1-NH₃]⁺), which processes electrocatalytic ammonia oxidation to N₂ and H₂ at a mild potential. Through establishing elementary e^-/H⁺ conversions with the ferric ammine, a formal Fe(IV)-amido species, [1-NH₂]⁺, together with its conjugated Lewis acid, [1-NH₃]²⁺, was isolated and structurally characterized for the first time. Mechanism studies indicated that further oxidation of [1-NH₂]⁺ induces the reaction of the parent amido unit with NH₃. The formation of hydrazine is realized by the non-innocent nature of the phenylamido ligand that facilitates the concerted transfer of one proton and two electrons.

Finding the True Catalyst for Water Oxidation at Low Overpotential in the Presence of a Metal Complex

The design of molecular-based catalysts for oxygen-evolution reaction (OER) requires more investigations for the true catalyst to be found. First-row transition metal complexes are extensively investigated for OER, but the role of these metal complexes as a true catalyst is doubtful. Some doubts have been expressed about the role of first-row transition metal complexes for OER at high overpotentials (η > 450). Generally, the detection of the true catalyst has so far been focused on high overpotentials (η > 450) because at low overpotentials (η < 450), many methods are not sensitive enough to detect small amounts of heterogeneous catalysts on the electrode surface during the first seconds of the reaction. Ni(II) phthalocyanine-tetra sulfonate tetrasodium (1) is in moderate conditions (at 20-50 °C and pH 5-13) in the absence of electrochemical driving forces, which could make it noteworthy for OER. Herein, the results of OER in the presence of 1 at low overpotentials under alkaline conditions are presented. In addition, in the presence of Ni complexes, using an Fe ion is introduced as a new method for detecting Ni (hydr)oxide under OER. Our experiments indicate that in the presence of a homogeneous OER (pre)catalyst, a deep investigation is necessary to rule out the heterogeneous catalysts formed. Our approach is a roadmap in the field of catalysis to understand the OER mechanism in the presence of a molecular Ni-based catalyst design. Our results shown in this study are likely to open up new perspectives and discussion on many molecular catalysts in a considerable part of the chemistry community.