A novel 3-D bio-microfluidic system mimicking in vivo heterogeneous tumour microstructures reveals complex tumour-stroma interactions

Three-dimensional construction of hyperuniform, nonhyperuniform, and antihyperuniform disordered heterogeneous materials and their transport properties via spectral density functions

Rigorous theories connecting physical properties of a heterogeneous material to its microstructure offer a promising avenue to guide the computational material design and optimization. The spectral density function χ[over ̃]_{_{V}}(k), which can be obtained experimentally from scattering data, enables accurate determination of various transport and wave propagation characteristics, including the time-dependent diffusion spreadability S(t) and effective dynamic dielectric constant ε_{e} for electromagnetic wave propagation. Moreover, χ[over ̃]_{_{V}}(k) determines rigorous upper bounds on the fluid permeability K. Given the importance of χ[over ̃]_{_{V}}(k), we present here an efficient Fourier-space based computational framework to construct three-dimensional (3D) statistically isotropic two-phase heterogeneous materials corresponding to targeted spectral density functions. In particular, we employ a variety of analytical functional forms for χ[over ̃]_{_{V}}(k) that satisfy all known necessary conditions to construct disordered stealthy hyperuniform, standard hyperuniform, nonhyperuniform, and antihyperuniform two-phase heterogeneous material systems at varying phase volume fractions. We show that by tuning the correlations in the system across length scales via the targeted functions, one can generate a rich spectrum of distinct structures within each of the above classes of materials. Importantly, we present the first realization of antihyperuniform two-phase heterogeneous materials in 3D, which are characterized by autocovariance function χ_{_{V}}(r) with a power-law tail, resulting in microstructures that contain clusters of dramatically different sizes and morphologies. We also determine the diffusion spreadability S(t) and estimate the fluid permeability K associated with all of the constructed materials directly from the corresponding spectral densities. Although it is well established that the long-time asymptotic scaling behavior of S(t) only depends on the functional form of χ[over ̃]_{_{V}}(k), with the stealthy hyperuniform and antihyperuniform media, respectively, achieving the most and least efficient transport, we find that varying the length-scale parameter within each class of χ[over ̃]_{_{V}}(k) functions can also lead to orders of magnitude variation of S(t) at intermediate and long time scales. Moreover, we find that increasing the solid volume fraction ϕ_{1} and correlation length a in the constructed media generally leads to a decrease in the dimensionless fluid permeability K/a^{2}, while the antihyperuniform media possess the largest K/a^{2} among the four classes of materials with the same ϕ_{1} and a. These results indicate the feasibility of employing parameterized spectral densities for designing composites with targeted transport properties.

Microfluidic Applications in Prostate Cancer Research

Prostate cancer is a disease in which cells in the prostate, a gland in the male reproductive system below the bladder, grow out of control and, among men, it is the second-most frequently diagnosed cancer (other than skin cancer). In recent years, prostate cancer death rate has stabilized and, currently, it is the second-most frequent cause of cancer death in men (after lung cancer). Most deaths occur due to metastasis, as cancer cells from the original tumor establish secondary tumors in distant organs. For a long time, classical cell cultures and animal models have been utilized in basic and applied scientific research, including clinical applications for many diseases, such as prostate cancer, since no better alternatives were available. Although helpful in dissecting cellular mechanisms, these models are poor predictors of physiological behavior mainly because of the lack of appropriate microenvironments. Microfluidics has emerged in the last two decades as a technology that could lead to a paradigm shift in life sciences and, in particular, controlling cancer. Microfluidic systems, such as organ-on-chips, have been assembled to mimic the critical functions of human organs. These microphysiological systems enable the long-term maintenance of cellular co-cultures in vitro to reconstitute in vivo tissue-level microenvironments, bridging the gap between traditional cell cultures and animal models. Several reviews on microfluidics for prostate cancer studies have been published focusing on technology advancement and disease progression. As metastatic castration-resistant prostate cancer remains a clinically challenging late-stage cancer, with no curative treatments, we expanded this review to cover recent microfluidic applications related to prostate cancer research. The review includes discussions of the roles of microfluidics in modeling the human prostate, prostate cancer initiation and development, as well as prostate cancer detection and therapy, highlighting potentially major contributions of microfluidics in the continuous march toward eradicating prostate cancer.

Emulation and evaluation of tumor cell combined chemotherapy in isotropic/anisotropic collagen fiber microenvironments

The rapid emergence of anisotropic collagen fibers in the tissue microenvironment is a critical transition point in late-stage breast cancer. Specifically, the fiber orientation facilitates the likelihood of high-speed tumor cell invasion and metastasis, which pose lethal threats to patients. Thus, based on this transition point, one key issue is how to determine and evaluate efficient combination chemotherapy treatments in late-stage cancer. In this study, we designed a collagen microarray chip containing 241 high-throughput microchambers with embedded metastatic breast cancer cell MDA-MB-231-RFP. By utilizing collagen's unique structure and hydromechanical properties, the chip constructed three-dimensional isotropic and anisotropic collagen fiber structures to emulate the tumor cell microenvironment at early and late stages. We injected different chemotherapeutic drugs into its four channels and obtained composite biochemical concentration profiles. Our results demonstrate that anisotropic collagen fibers promote cell proliferation and migration more than isotropic collagen fibers, suggesting that the geometric arrangement of fibers plays an important role in regulating cell behavior. Moreover, the presence of anisotropic collagen fibers may be a potential factor leading to the poor efficacy of combined chemotherapy in late-stage breast cancer. We investigated the efficacy of various chemotherapy drugs using cell proliferation inhibitors paclitaxel and gemcitabine and tumor cell migration inhibitors 7rh and PP2. To ensure the validity of our findings, we followed a systematic approach that involved testing the inhibitory effects of these drugs. According to our results, the drug combinations' effectiveness could be ordered as follows: paclitaxel + gemcitabine > gemcitabine + 7rh > PP2 + paclitaxel > 7rh + PP2. This study shows that the biomimetic chip system not only facilitates the creation of a realistic in vitro model for examining the cell migration mechanism in late-stage breast cancer but also has the potential to function as an effective tool for future chemotherapy assessment and personalized medicine.

Reciprocity of Cell Mechanics with Extracellular Stimuli: Emerging Opportunities for Translational Medicine

Human cells encounter dynamic mechanical cues in healthy and diseased tissues, which regulate their molecular and biophysical phenotype, including intracellular mechanics as well as force generation. Recent developments in bio/nanomaterials and microfluidics permit exquisitely sensitive measurements of cell mechanics, as well as spatiotemporal control over external mechanical stimuli to regulate cell behavior. In this review, the mechanobiology of cells interacting bidirectionally with their surrounding microenvironment, and the potential relevance for translational medicine are considered. Key fundamental concepts underlying the mechanics of living cells as well as the extracelluar matrix are first introduced. Then the authors consider case studies based on 1) microfluidic measurements of nonadherent cell deformability, 2) cell migration on micro/nano-topographies, 3) traction measurements of cells in three-dimensional (3D) matrix, 4) mechanical programming of organoid morphogenesis, as well as 5) active mechanical stimuli for potential therapeutics. These examples highlight the promise of disease diagnosis using mechanical measurements, a systems-level understanding linking molecular with biophysical phenotype, as well as therapies based on mechanical perturbations. This review concludes with a critical discussion of these emerging technologies and future directions at the interface of engineering, biology, and medicine.

Organ-on-a-chip platforms as novel advancements for studying heterogeneity, metastasis, and drug efficacy in breast cancer

Breast cancer has the highest cancer incidence rate in women worldwide. Therapies for breast cancer have shown high success rates, yet many cases of recurrence and drug resistance are still reported. Developing innovative strategies for studying breast cancer may improve therapeutic outcomes of the disease by providing better insight into the associated molecular mechanisms. A novel advancement in breast cancer research is the utilization of organ-on-a-chip (OOAC) technology to establish in vitro physiologically relevant breast cancer biomimetic models. This emerging technology combines microfluidics and tissue culturing methods to establish organ-specific micro fabricated culture models. Here, we shed light on the advantages of OOAC platforms over conventional in vivo and in vitro models in terms of mimicking tissue heterogeneity, disease progression, and facilitating pharmacological drug testing with a focus on models of the mammary gland in both normal and breast cancer states. By highlighting the various designs and applications of the breast-on-a-chip platforms, we show that the latter propose means to facilitate breast cancer-related studies and provide an efficient approach for therapeutic drug screening in vitro.

Microfluidics meets 3D cancer cell migration

An early step of metastasis requires a complex and coordinated migration of invasive tumor cells into the surrounding tumor microenvironment (TME), which contains extracellular matrix (ECM). It is being appreciated that 3D matrix-based microfluidic models have an advantage over conventional in vitro and animal models to study tumor progression events. Recent microfluidic models have enabled recapitulation of key mechanobiological features present within the TME to investigate collective cancer cell migration and invasion. Microfluidics also allows for functional interrogation and therapeutic manipulation of specific steps to study the dynamic aspects of tumor progression. In this review, we focus on recent developments in cancer cell migration and how microfluidic strategies have evolved to address the physiological complexities of the TME to visualize migration modes adapted by various tumor cells.

Construction of in vitro 3-D model for lung cancer-cell metastasis study

Background

Cancer metastasis is the main cause of mortality in cancer patients. However, the drugs targeting metastasis processes are still lacking, which is partially due to the short of effective in vitro model for cell invasion studies. The traditional 2-D culture method cannot reveal the interaction between cells and the surrounding extracellular matrix during invasion process, while the animal models usually are too complex to explain mechanisms in detail. Therefore, a precise and efficient 3-D in vitro model is highly desirable for cell invasion studies and drug screening tests.

Methods

Precise micro-fabrication techniques are developed and integrated with soft hydrogels for constructing of 3-D lung-cancer micro-environment, mimicking the pulmonary gland or alveoli as in vivo.

Results

A 3-D in vitro model for cancer cell culture and metastasis studies is developed with advanced micro-fabrication technique, combining microfluidic system with soft hydrogel. The constructed microfluidic platform can provide nutrition and bio-chemical factors in a continuous transportation mode and has the potential to form stable chemical gradient for cancer invasion research. Hundreds of micro-chamber arrays are constructed within the collagen gel, ensuring that all surrounding substrates for tumor cells are composed of natural collagen hydrogel, like the in vivo micro-environment. The 3-D in vitro model can also provide a fully transparent platform for the visual observation of the cell morphology, proliferation, invasion, cell-assembly, and even the protein expression by immune-fluorescent tests if needed.

The lung-cancer cells A549 and normal lung epithelial cells (HPAEpiCs) have been seeded into the 3-D system. It is found out that cells can normally proliferate in the microwells for a long period. Moreover, although the cancer cells A549 and alveolar epithelial cells HPAEpiCs have the similar morphology on 2-D solid substrate, in the 3-D system the cancer cells A549 distributed sparsely as single round cells on the extracellular matrix (ECM) when they attached to the substrate, while the normal lung epithelial cells can form cell aggregates, like the structure of normal tissue. Importantly, cancer cells cultured in the 3-D in vitro model can exhibit the interaction between cells and extracellular matrix. As shown in the confocal microscope images, the A549 cells present round and isolated morphology without much invasion into ECM, while starting from around Day 5, cells changed their shape to be spindle-like, as in mesenchymal morphology, and then started to destroy the surrounding ECM and invade out of the micro-chambers.

Conclusions

A 3-D in vitro model is constructed for cancer cell invasion studies, combining the microfluidic system and micro-chamber structures within hydrogel. To show the invasion process of lung cancer cells, the cell morphology, proliferation, and invasion process are all analyzed. The results confirmed that the micro-environment in the 3-D model is vital for revealing the lung cancer cell invasion as in vivo.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12885-022-09546-9.

Novel Ex Vivo Models of Epithelial Ovarian Cancer: The Future of Biomarker and Therapeutic Research

Epithelial ovarian cancer (EOC) is a heterogenous disease associated with variations in presentation, pathology and prognosis. Advanced EOC is typified by frequent relapse and a historical 5-year survival of less than 30% despite improvements in surgical and systemic treatment. The advent of next generation sequencing has led to notable advances in the field of personalised medicine for many cancer types. Success in achieving cure in advanced EOC has however been limited, although significant prolongation of survival has been demonstrated. Development of novel research platforms is therefore necessary to address the rapidly advancing field of early diagnostics and therapeutics, whilst also acknowledging the significant tumour heterogeneity associated with EOC. Within available tumour models, patient-derived organoids (PDO) and explant tumour slices have demonstrated particular promise as novel ex vivo systems to model different cancer types including ovarian cancer. PDOs are organ specific 3D tumour cultures that can accurately represent the histology and genomics of their native tumour, as well as offer the possibility as models for pharmaceutical drug testing platforms, offering timing advantages and potential use as prospective personalised models to guide clinical decision-making. Such applications could maximise the benefit of drug treatments to patients on an individual level whilst minimising use of less effective, yet toxic, therapies. PDOs are likely to play a greater role in both academic research and drug development in the future and have the potential to revolutionise future patient treatment and clinical trial pathways. Similarly, ex vivo tumour slices or explants have also shown recent renewed promise in their ability to provide a fast, specific, platform for drug testing that accurately represents in vivo tumour response. Tumour explants retain tissue architecture, and thus incorporate the majority of tumour microenvironment making them an attractive method to re-capitulate in vivo conditions, again with significant timing and personalisation of treatment advantages for patients. This review will discuss the current treatment landscape and research models for EOC, their development and new advances towards the discovery of novel biomarkers or combinational therapeutic strategies to increase treatment options for women with ovarian cancer.

Biological gel-based microchamber array for tumor cell proliferation and migration studies in well-controlled biochemical gradients

Breast cancer metastasis is a complex process controlled by multiple factors, including various cell-cell interactions, cell-environment coupling, and oxygen, nutrient and drug gradients that are intimately related to the heterogeneous breast tissue structure. In this study, we constructed a high-throughput in vitro biochip system containing an array of 642 microchambers arranged in a checkerboard configuration, with each chamber embedded in a composite extracellular matrix (ECM) composed of engineered collagen and Matrigel to mimic local heterogeneous environment in vivo. In addition, a controllable complex tetragonal chemical concentration profile can be achieved by imposing chemical compounds at the four boundaries of the chip, leading to distinct local nutrient and/or drug gradients in the individual microchambers. Here, the microchamber array with composite ECM (MACECM) device aims to simulate multiple tumor cell niches composed of both breast epithelial cells (MCF-10A-GFP) and metastatic breast cancer cells (MDA-MB-231-RFP), which enables systematic studies of cell responses to a variety of biochemical conditions. The results obtained from the MACECM studies indicate that discoidin domain receptor 1 (DDR1) inhibitor 7rh and matrix metalloproteinase inhibitor batimastat, in association with epidermal growth factor (EGF) had no significant effects on the growth of MCF-10A-GFP cells, but had significant effects on DDR1 expression and the related migratory behavior of MDA-MB-231-RFP cells. The MACECM design not only enables the construction of a more realistic in vitro model for investigating cancer cell migration mechanisms but also has considerable potential for further development as a platform for next-generation high-throughput and therapeutic screening (e.g., anti-cancer drug evaluation) and personalized medicine.

Employing hydrogels in tissue engineering approaches to boost conventional cancer-based research and therapies

Cancer is a complicated disease that involves the efforts of researchers to introduce and investigate novel successful treatments. Traditional cancer therapy approaches, especially chemotherapy, are prone to possible systemic side effects, such as the dysfunction of liver or kidney, neurological side effects and a decrease of bone marrow activity. Hydrogels, along with tissue engineering techniques, provide tremendous potential for scientists to overcome these issues through the release of drugs at the site of tumor. Hydrogels demonstrated competency as potent and stimulus-sensitive drug delivery systems for tumor removal, which is attributed to their unique features, including high water content, biocompatibility, and biodegradability. In addition, hydrogels have gained more attention as 3D models for easier and faster screening of cancer and tumors due to their potential in mimicking the extracellular matrix. Hydrogels as a reservoir can be loaded by an effective dosage of chemotherapeutic agents, and then deliver them to targets. In comparison to conventional procedures, hydrogels considerably decreased the total cost, duration of research, and treatment time. This study provides a general look into the potential role of hydrogels as a powerful tool to augment cancer studies for better analysis of cancerous cell functions, cell survival, angiogenesis, metastasis, and drug screening. Moreover, the upstanding application of drug delivery systems related to the hydrogel in order to sustain the release of desired drugs in the tumor cell-site were explored.

Patient-derived tumour models for personalized therapeutics in urological cancers

Preclinical knowledge of dysregulated pathways and potential biomarkers for urological cancers has undergone limited translation into the clinic. Moreover, the low approval rate of new anticancer drugs and the heterogeneous drug responses in patients indicate that current preclinical models do not always reflect the complexity of malignant disease. Patient-derived tumour models used in preclinical uro-oncology research include 3D culture systems, organotypic tissue slices and patient-derived xenograft models. Technological innovations have enabled major improvements in the capacity of these tumour models to reproduce the clinical complexity of urological cancers. Each type of patient-derived model has inherent advantages and limitations that can be exploited, either alone or in combination, to gather specific knowledge on clinical challenges and address unmet clinical needs. Nevertheless, few opportunities exist for patients with urological cancers to benefit from personalized therapeutic approaches. Clinical validation of experimental data is needed to facilitate the translation and implementation of preclinical knowledge into treatment decision making.

A microfluidic platform for cultivating ovarian cancer spheroids and testing their responses to chemotherapies

There is increasing interest in utilizing in vitro cultures as patient avatars to develop personalized treatment for cancer. Typical cultures utilize Matrigel-coated plates and media to promote the proliferation of cancer cells as spheroids or tumor explants. However, standard culture conditions operate in large volumes and require a high concentration of cancer cells to initiate this process. Other limitations include variability in the ability to successfully establish a stable line and inconsistency in the dimensions of these microcancers for in vivo drug response measurements. This paper explored the utility of microfluidics in the cultivation of cancer cell spheroids. Six patient-derived xenograft (PDX) tumors of high-grade serous ovarian cancer were used as the source material to demonstrate that viability and epithelial marker expression in the microfluidic cultures was superior to that of Matrigel or large volume 3D cultures. To further demonstrate the potential for miniaturization and multiplexing, we fabricated multichamber microfluidic devices with integrated microvalves to enable serial seeding of several chambers followed by parallel testing of several drug concentrations. These valve-enabled microfluidic devices permitted the formation of spheroids and testing of seven drug concentrations with as few as 100,000 cancer cells per device. Overall, we demonstrate the feasibility of maintaining difficul-to-culture primary cancer cells and testing drugs in a microfluidic device. This microfluidic platform may be ideal for drug testing and personalized therapy when tumor material is limited, such as following the acquisition of biopsy specimens obtained by fine-needle aspiration.

Evolution of the Experimental Models of Cholangiocarcinoma

Cholangiocarcinoma (CCA) is a rare, aggressive disease with poor overall survival. In advanced cases, surgery is often not possible or fails; in addition, there is a lack of effective and specific therapies. Multidisciplinary approaches and advanced technologies have improved the knowledge of CCA molecular pathogenesis, highlighting its extreme heterogeneity and high frequency of genetic and molecular aberrations. Effective preclinical models, therefore, should be based on a comparable level of complexity. In the past years, there has been a consistent increase in the number of available CCA models. The exploitation of even more complex CCA models is rising. Examples are the use of CRISPR/Cas9 or stabilized organoids for in vitro studies, as well as patient-derived xenografts or transgenic mouse models for in vivo applications. Here, we examine the available preclinical CCA models exploited to investigate: (i) carcinogenesis processes from initiation to progression; and (ii) tools for personalized therapy and innovative therapeutic approaches, including chemotherapy and immune/targeted therapies. For each model, we describe the potential applications, highlighting both its advantages and limits.

The Fabrication and Application Mechanism of Microfluidic Systems for High Throughput Biomedical Screening: A Review

Microfluidic systems have been widely explored based on microfluidic technology, and it has been widely used for biomedical screening. The key parts are the fabrication of the base scaffold, the construction of the matrix environment in the 3D system, and the application mechanism. In recent years, a variety of new materials have emerged, meanwhile, some new technologies have been developed. In this review, we highlight the properties of high throughput and the biomedical application of the microfluidic chip and focus on the recent progress of the fabrication and application mechanism. The emergence of various biocompatible materials has provided more available raw materials for microfluidic chips. The material is not confined to polydimethylsiloxane (PDMS) and the extracellular microenvironment is not limited by a natural matrix. The mechanism is also developed in diverse ways, including its special physical structure and external field effects, such as dielectrophoresis, magnetophoresis, and acoustophoresis. Furthermore, the cell/organ-based microfluidic system provides a new platform for drug screening due to imitating the anatomic and physiologic properties in vivo. Although microfluidic technology is currently mostly in the laboratory stage, it has great potential for commercial applications in the future.

Human stroma and epithelium co-culture in a microfluidic model of a human prostate gland

The prostate is a walnut-sized gland that surrounds the urethra of males at the base of the bladder comprising a muscular portion, which controls the release of urine, and a glandular portion, which secretes fluids that nourish and protect sperms. Here, we report the development of a microfluidic-based model of a human prostate gland. The polydimethylsiloxane (PDMS) microfluidic device, consisting of two stacked microchannels separated by a polyester porous membrane, enables long-term in vitro cocultivation of human epithelial and stromal cells. The porous separation membrane provides an anchoring scaffold for long-term culturing of the two cell types on its opposite surfaces allowing paracrine signaling but not cell crossing between the two channels. The microfluidic device is transparent enabling high resolution bright-field and fluorescence imaging. Within this coculture model of a human epithelium/stroma interface, we simulated the functional development of the in vivo human prostate gland. We observed the successful differentiation of basal epithelial cells into luminal secretory cells determined biochemically by immunostaining with known differentiation biomarkers, particularly androgen receptor expression. We also observed morphological changes where glandlike mounds appeared with relatively empty centers reminiscent of prostatic glandular acini structures. This prostate-on-a-chip will facilitate the direct evaluation of paracrine and endocrine cross talk between these two cell types as well as studies associated with normal vs disease-related events such as prostate cancer.

Morphological quantification of proliferation-to-invasion transition in tumor spheroids

BACKGROUND

Metastasis determines the lethality of cancer. In most clinical cases, patients are able to live with tumor proliferation before metastasis. Thus, the transition from tumor proliferation to metastasis/invasion is essential. However, the mechanism is still unclear and especially, the proliferation-to-metastasis/invasion transition point has not been well defined. Therefore, quantitative characterization of this transition is urgently needed.

METHODS

We have successfully developed a home-built living-cell incubation system combined with an inverted optical microscope, and a systematic, quantitative approach to describing the major characteristic morphological parameters for the identification of the critical transition points for tumor-cell spheroids in a collagen fiber scaffold.

RESULTS

The system focuses on in vitro tumor modeling, e.g. the development of tumor-cell spheroids in a collagen fiber scaffold and the monitoring of cell transition from proliferation to invasion. By applying this approach to multiple tumor spheroid models, such as U87 (glioma tumor), H1299 (lung cancer), and MDA-MB-231 (breast cancer) cells, we have obtained quantitative morphological references to evaluate the proliferation-to-invasion transition time, as well as differentiating the invasion potential of tumor cells upon environmental changes, i.e. drug application.

CONCLUSIONS

Our quantitative approach provides a feasible clarification for the proliferation-to-invasion transition of in vitro tumor models (spheroids). Moreover, the transition time is a useful reference for the invasive potential of tumor cells.

GENERAL SIGNIFICANCE

This quantitative approach is potentially applicable to primary tumor cells, and thus has potential applications in the fields of cancer metastasis investigations and clinical diagnostics.

Engineering approaches to studying cancer cell migration in three-dimensional environments

Cancer is one of the most devastating diseases of our time, with 17 million new cancer cases and 9.5 million cancer deaths in 2018 worldwide. The mortality associated with cancer results primarily from metastasis, i.e. the spreading of cancer cells from the primary tumour to other organs. The invasion and migration of cells through basement membranes, tight interstitial spaces and endothelial cell layers are key steps in the metastatic cascade. Recent studies demonstrated that cell migration through three-dimensional environments that mimic the in vivo conditions significantly differs from their migration on two-dimensional surfaces. Here, we review recent technological advances made in the field of cancer research that provide more 'true to the source' experimental platforms and measurements for the study of cancer cell invasion and migration in three-dimensional environments. These include microfabrication, three-dimensional bioprinting and intravital imaging tools, along with force and stiffness measurements of cells and their environments. These techniques will enable new studies that better reflect the physiological environment found in vivo, thereby producing more robust results. The knowledge achieved through these studies will aid in the development of new treatment options with the potential to ultimately lighten the devastating cost cancer inflicts on patients and their families. This article is part of a discussion meeting issue 'Forces in cancer: interdisciplinary approaches in tumour mechanobiology'.

Biomechanics of Collective Cell Migration in Cancer Progression: Experimental and Computational Methods

Cell migration is essential for regulating many biological processes in physiological or pathological conditions, including embryonic development and cancer invasion. In vitro and in silico studies suggest that collective cell migration is associated with some biomechanical particularities such as restructuring of extracellular matrix (ECM), stress and force distribution profiles, and reorganization of the cytoskeleton. Therefore, the phenomenon could be understood by an in-depth study of cells' behavior determinants, including but not limited to mechanical cues from the environment and from fellow "travelers". This review article aims to cover the recent development of experimental and computational methods for studying the biomechanics of collective cell migration during cancer progression and invasion. We also summarized the tested hypotheses regarding the mechanism underlying collective cell migration enabled by these methods. Together, the paper enables a broad overview on the methods and tools currently available to unravel the biophysical mechanisms pertinent to cell collective migration as well as providing perspectives on future development toward eventually deciphering the key mechanisms behind the most lethal feature of cancer.

Two-way communication between ex vivo tissues on a microfluidic chip: application to tumor-lymph node interaction

Experimentally accessible tools to replicate the complex biological events of in vivo organs offer the potential to reveal mechanisms of disease and potential routes to therapy. In particular, models of inter-organ communication are emerging as the next essential step towards creating a body-on-a-chip, and may be particularly useful for poorly understood processes such as tumor immunity. In this paper, we report the first multi-compartment microfluidic chip that continuously recirculates a small volume of media through two ex vivo tissue samples to support inter-organ cross-talk via secreted factors. To test on-chip communication, protein release and capture were quantified using well-defined artificial tissue samples and model proteins. Proteins released by one sample were transferred to the downstream reservoir and detectable in the downstream sample. Next, the chip was applied to model the communication between a tumor and a lymph node, to test whether on-chip dual-organ culture could recreate key features of tumor-induced immune suppression. Slices of murine lymph node were co-cultured with tumor or healthy tissue on-chip with recirculating media, then tested for their ability to respond to T cell stimulation. Interestingly, lymph node slices co-cultured with tumor slices appeared more immunosuppressed than those co-cultured with healthy tissue, suggesting that the chip may successfully model some features of tumor-immune interaction. In conclusion, this new microfluidic system provides on-chip co-culture of pairs of tissue slices under continuous recirculating flow, and has the potential to model complex inter-organ communication ex vivo with full experimental accessibility of the tissues and their media.

Behaviors of Glioblastoma Cells in in Vitro Microenvironments

Glioblastoma (GBM) is the most malignant and highly aggressive brain tumor. In this study, four types of typical GBM cell lines (LN229, SNB19, U87, U251) were cultured in a microfabricated 3-D model to study their in vitro behaviors. The 3-D in vitro model provides hollow micro-chamber arrays containing a natural collagen interface and thus allows the GBM cells to grow in the 3-D chambers. The GBM cells in this model showed specific properties on the aspects of cell morphology, proliferation, migration, and invasion, some of which were rarely observed before. Furthermore, how the cells invaded into the surrounding ECM and the corresponding specific invasion patterns were observed in details, implying that the four types of cells have different features during their development in cancer. This complex in vitro model, if applied to patient derived cells, possesses the potential of becoming a clinically relevant predictive model.

Modeling Hematological Diseases and Cancer With Patient-Specific Induced Pluripotent Stem Cells

The advent of induced pluripotent stem cells (iPSCs) together with recent advances in genome editing, microphysiological systems, tissue engineering and xenograft models present new opportunities for the investigation of hematological diseases and cancer in a patient-specific context. Here we review the progress in the field and discuss the advantages, limitations, and challenges of iPSC-based malignancy modeling. We will also discuss the use of iPSCs and its derivatives as cellular sources for drug target identification, drug development and evaluation of pharmacological responses.

A novel 3D breast-cancer-on-chip platform for therapeutic evaluation of drug delivery systems

The ability to rapidly screen drugs and drug delivery systems with a more accurate tumor model to better predict their in vivo performance is of great importance in drug development, because there have been some limitations in currently used tumor models. To address this problem, we developed an in vitro breast tumor model on a chip, composed of a microvessel wall, the extracellular matrix (ECM) and uniformly sized multicellular tumor spheroids (MCTS), for the evaluation of nanoparticle-based drug delivery systems. A carbon dots (CDs)-based drug delivery system was synthesized as a model to evaluate the real-time monitoring ability of the system transport through the endothelium and the penetrability into MCTS with a high spatio-temporal resolution on the established platform. Moreover, a modified 96-well plate was used to hold the microfluidic devices for in situ cytotoxicity assays of the MCTS by a microplate reader. Our findings revealed that the synthesized drug delivery system could be transported across an endothelial monolayer within 3 h and was nontoxic to the cells throughout the experiment. In addition, we demonstrated the capabilities of this model by assessing the delivery and efficacy of the drug delivery system in BT549 and T47D spheroids, two cell lines representative of triple negative breast cancer (TNBC) and non-TNBC, respectively. This microfluidic platform enables evaluation of dynamic transport behavior and in situ cytotoxicity evaluation in one system. The established platform provides a more accurate and low-cost in vitro model for rapid drug screening in pre-clinical studies.

Microfabrication-Based Three-Dimensional (3-D) Extracellular Matrix Microenvironments for Cancer and Other Diseases

Exploring the complicated development of tumors and metastases needs a deep understanding of the physical and biological interactions between cancer cells and their surrounding microenvironments. One of the major challenges is the ability to mimic the complex 3-D tissue microenvironment that particularly influences cell proliferation, migration, invasion, and apoptosis in relation to the extracellular matrix (ECM). Traditional cell culture is unable to create 3-D cell scaffolds resembling tissue complexity and functions, and, in the past, many efforts were made to realize the goal of obtaining cell clusters in hydrogels. However, the available methods still lack a precise control of cell external microenvironments. Recently, the rapid development of microfabrication techniques, such as 3-D printing, microfluidics, and photochemistry, has offered great advantages in reconstructing 3-D controllable cancer cell microenvironments in vitro. Consequently, various biofunctionalized hydrogels have become the ideal candidates to help the researchers acquire some new insights into various diseases. Our review will discuss some important studies and the latest progress regarding the above approaches for the production of 3-D ECM structures for cancer and other diseases. Especially, we will focus on new discoveries regarding the impact of the ECM on different aspects of cancer metastasis, e.g., collective invasion, enhanced intravasation by stress and aligned collagen fibers, angiogenesis regulation, as well as on drug screening.