A fiber-optic sensor for neurotransmitters with ultralow concentration: near-infrared plasmonic electromagnetic field enhancement using raspberry-like meso-SiO2 nanospheres

Microscale insight into the proton concentration during electrolytic reaction via an optical microfiber: potential for microcurrent monitoring by a dielectric probe

Local microcurrent monitoring is of great significance for biological and battery systems, yet it poses a formidable challenge. The current measurement techniques rely on electromagnetic materials which inevitably introduce interference to the system under examination. To address this issue, a promising approach based on a dielectric fiber-optic sensor is demonstrated. The microfiber is capable of detecting microcurrent through monitoring the localized proton concentration signal with a pH resolution of 0.0052 pH units. By sensing the refractive index variation surrounding the sensor induced by the interaction between local proton concentration changes and oxidizer-treated microfiber surface through the evanescent field, this sensing mechanism effectively avoids the interference of the electromagnetic material on the performance of the tested system. This sensor exhibits a limit of detection for microcurrent of 1 μA. The sensing region is a microfiber with a diameter of 8.8 μm. It can get invaluable information that cannot be obtained through conventional electrochemical methods. Examples include photocurrent attenuation in photogenerated carrier materials during illumination, electrical activation in nerve cells, and fluctuations in the efficiency of electrical energy generation during battery discharge. This approach provides a powerful complement to electrochemical methods for the elucidation of microscale reaction mechanisms. The information provided by the prepared dielectric fiber-optic sensor will shed more light on proton kinetics and electrochemical and electrobiological mechanisms, which may fill an important gap in the current bioelectricity and battery monitoring methods.

Graphitic carbon @ silver nanoparticle @ porous silicon Bragg mirror composite SERS substrate for gallic acid detection

Graphite carbon (G) @ silver (Ag) @ porous silicon Bragg mirror (PSB) composite SERS substrate was successfully synthesized using electrochemical etching (ec) and hydrothermal carbonization (HTC) techniques with silver nitrate as the source of silver and glucose as the source of carbon. The PSB was used as a functional scaffold for the synthesis of graphite-carbon and silver composite nanoparticles (G@AgNPs) on its surface, thereby combining SERS activity and antioxidant properties. To our knowledge, this is the first time that G@AgNPs has been synthesized on the PSB using glucose as a carbon source. The synthesized G@Ag@PSB was utilized as a SERS platform for the detection of gallic acid (GA). Test results demonstrated that the substrate exhibited a remarkable SERS enhancement capability for GA, with the enhancement factor (EF) reaching 2 × 105. The reproducibility of the SERS spectral signal was excellent, with a relative standard deviation (RSD) of 7.5 %. The sensitivity test results showed that the linear range of GA detection based on G@Ag@PSB composite SERS substrate was 2 × 10-3-2 × 10-12M. The relationship between GA concentration and SERS signal intensity exhibited a strong linear correlation, with a linear correlation coefficient (R2) of 0.97634. Moreover, even with an extended storage period, only a marginal decline in the signal intensity of GA on the substrate was observed. The results of this study demonstrate that the prepared G@Ag@PSB composite SERS substrate had good potential application performance as a low-cost SERS detection platform suitable for commercial use. In addition, this advance facilitates the further exploration of more nanomaterials with ultra-high sensitivity in SERS technology.

Quantitative Assessment of Fungal Biomarkers in Clinical Samples via an Interface-Modulated Optical Fiber Biosensor

Invasive fungal infections pose a significant public health threat. The lack of precise and timely diagnosis is a primary factor contributing to the significant increase in patient mortality rates. Here, an interface-modulated biosensor utilizing an optical fiber for quantitative analysis of fungal biomarkers at the early stage of point-of-care testing (POCT), is reported. By integrating surface refractive index (RI) modulation and plasmon enhancement, the sensor to achieve high sensitivity in a directional response to the target analytes, is successfully optimized. As a result, a compact fiber-optic sensor with rapid response time, cost-effectiveness, exceptional sensitivity, stability, and specificity, is developed. This sensor can successfully identify the biomarkers of specific pathogens from blood or other tissue specimens in animal models. It quantifies clinical blood samples with precision and effectively discriminates between negative and positive cases, thereby providing timely alerts to potential patients. It significantly reduces the detection time of fungal infection to only 30 min. Additionally, this approach exhibits remarkable stability and achieves a limit of detection (LOD) three orders of magnitude lower than existing methods. It overcomes the limitations of existing detection methods, including a high rate of misdiagnosis, prolonged detection time, elevated costs, and the requirement for stringent laboratory conditions.

Plasmonic Coupling on an Optical Microfiber Surface: Enabling Single-Molecule and Noninvasive Dopamine Detection

Optical fibers can be effective biosensors when employed in early-stage diagnostic point-of-care devices as they can avoid interference from molecules with similar redox potentials. Nevertheless, their sensitivity needs to be improved for real-world applications, especially for small-molecule detection. This work demonstrates an optical microfiber biosensor for dopamine (DA) detection based on the DA-binding-induced aptamer conformational transitions that occur at plasmonic coupling sites on a double-amplified nanointerface. The sensor exhibits ultrahigh sensitivity when detecting DA molecules at the single-molecule level; additionally, this work provides an approach for overcoming optical device sensitivity limits, further extending optical fiber single-molecule detection to a small molecule range (e.g., DA and metal ions). The selective energy enhancement and signal amplification at the binding sites effectively avoid nonspecific amplification of the whole fiber surface which may lead to false-positive results. The sensor can detect single-molecule DA signals in body-fluids. It can detect the released extracellular DA levels and monitor the DA oxidation process. An appropriate aptamer replacement allows the sensor to be used for the detection of other target small molecules and ions at the single-molecule level. This technology offers alternative opportunities for developing noninvasive early-stage diagnostic point-of-care devices and flexible single-molecule detection techniques in theoretical research.

Fiber Optic Plasmonic Sensors Based on Nanodome Arrays with Nanogaps

In this study, a high-performance fiber optic surface plasmon resonance (FO-SPR) sensor using a dome array with nanogaps (DANG) is proposed for label-free real-time detection of biomolecules. A novel and simple method using polymer beads enables high sensitivity by allowing hotspots with nanometer spacing between the Au dome and the surrounding film. The nanodome structure, which comprises a polymer core and a Au shell, induces a localized surface plasmon, expands the sensing area, and extensively enhances the electromagnetic field. The refractive index sensitivity of the FO-SPR sensor with nanostructures, i.e., with nanogaps and nanodomes, was found to be 7.8 times higher than that of the FO-SPR sensor without nanostructures. The proposed sensor achieved a low detection limit of 38 fg/mL while quantifying thyroglobulin antibody-antigen interactions and exhibited excellent selectivity. In addition, it helped detect serum samples with a 103% recovery rate.

Evaluation of site-selective drug effects on GABA receptors using nanovesicle-carbon nanotube hybrid devices

Site-selective drug effects on the ion-channel activities of γ-aminobutyric acid type A (GABA_A) receptors are evaluated by using a nanovesicle-carbon nanotube hybrid device. Here, nanovesicles containing GABA_A receptors are immobilized on the channel region of a carbon nanotube field-effect transistor. The receptor responses of this hybrid device to GABA are detected with a high sensitivity down to ∼1 aM even in the presence of other neurotransmitters. Further, sensitivity differences between two GABA_A-receptor-subunit compositions of α5β2γ2 and α1β2γ2 are assessed by normalizing the dose-dependent responses obtained from these hybrid devices. Specifically, the GABA concentration that produces 50% of maximal response (EC₅₀) is obtained as ∼10 pM for α5β2γ2 subunits and ∼1 nM for α1β2γ2 subunits of GABA_A receptor. Significantly, the potency profiles of both antagonist and agonist of GABA_A receptor can be evaluated by analyzing EC₅₀ values in the presence and absence of those drugs. A competitive antagonist increases the EC₅₀ value of GABA by binding to the same site as GABA, while an allosteric agonist reduces it by binding to a different site. These results indicate that this hybrid device can be a powerful tool for the evaluation of candidate drug substances modulating GABA-mediated neurotransmission.

A stable naked-eye colorimetric sensor for monitoring release of extracellular gamma-aminobutyric acid (GABA) neurotransmitter from SH-SY5Y cells

A novel optical γ-aminobutyric acid (GABA)-based sensor was developed on interacting thiol compounds and o-phthalaldehyde (OPA) to form thiacetal compounds. Then, the thiacetal interacts with the GABA molecule to form an isoindole compound. The effects of four thiol compounds on the stability of the resulting isoindole compound were assessed. The 2-mercaptoethanol, "one of the most used derivatizing agents," is unexpectedly the least stable; while, 16-mercaptohexadecanoic acid resulted in the most durable isoindole compound. The developed sensor showed the capability for detecting GABA within a wide concentration range spanning from 500 nmol L^-1 to 100 µmol L^-1. The detection limit was about 330 nmol L^-1, which indicated the high sensitivity of the developed sensor compared with those previously reported. The findings illustrated the ability to detect GABA at the physiological pH (pH = 7.4) without adjusting the pH value, opening the door for real applications. Furthermore, the sensor could detect various GABA concentrations in human serum with good recovery percentages (98% to 101.4%). In addition, this assay was applied to monitor GABA release from the SH-SY5Y cell line to convert glutamate into GABA. This result indicates the capability of the proposed assay for visually monitoring the release of GABA neurotransmitters.

Chemical sensing with Au and Ag nanoparticles

Noble metal nanoparticles (NPs) are ideal scaffolds for the fabrication of sensing devices because of their high surface-to-volume ratio combined with their unique optical and electrical properties which are extremely sensitive to changes in the environment. Such characteristics guarantee high sensitivity in sensing processes. Metal NPs can be decorated with ad hoc molecular building blocks which can act as receptors of specific analytes. By pursuing this strategy, and by taking full advantage of the specificity of supramolecular recognition events, highly selective sensing devices can be fabricated. Besides, noble metal NPs can also be a pivotal element for the fabrication of chemical nose/tongue sensors to target complex mixtures of analytes. This review highlights the most enlightening strategies developed during the last decade, towards the fabrication of chemical sensors with either optical or electrical readout combining high sensitivity and selectivity, along with fast response and full reversibility, with special attention to approaches that enable efficient environmental and health monitoring.

Challenges of simultaneous measurements of brain extracellular GABA and glutamate in vivo using enzyme-coated microelectrode arrays

BACKGROUND

Although GABA is the major inhibitory neurotransmitter in the CNS, quantifying in vivo GABA levels has been challenging. The ability to co-monitor both GABA and the major excitatory neurotransmitter, glutamate, would be a powerful tool in both research and clinical settings.

NEW METHOD

Ceramic-based microelectrode arrays (MEAs) were used to quantify gamma-aminobutyric acid (GABA) by employing a dual-enzyme reaction scheme including GABase and glutamate oxidase (GluOx). Glutamate was simultaneously quantified on adjacent recording sites coated with GluOx alone. Endogenous glutamate was subtracted from the combined GABA and glutamate signal to yield a pure GABA concentration.

RESULTS

Electrode sensitivity to GABA in conventional, stirred in vitro calibrations at pH 7.4 did not match the in vivo sensitivity due to diffusional losses. Non-stirred calibrations in agarose or stirred calibrations at pH 8.6 were used to match the in vivo GABA sensitivity. In vivo data collected in the rat brain demonstrated feasibility of the GABA/glutamate MEA including uptake of locally applied GABA, KCl-evoked GABA release and modulation of endogenous GABA with vigabatrin.

COMPARISON WITH EXISTING METHODS

Implantable enzyme-coated microelectrode arrays have better temporal and spatial resolution than existing off-line methods. However, interpretation of results can be complicated due to the multiple recording site and dual enzyme approach.

CONCLUSIONS

The initial in vitro and in vivo studies supported that the new MEA configuration may be a viable platform for combined GABA and glutamate measures in the CNS extending the previous reports to in vivo GABA detection. The challenges of this approach are emphasized.

Real-Time Cellular Cytochrome C Monitoring through an Optical Microfiber: Enabled by a Silver-Decorated Graphene Nanointerface

The translocation of cytochrome c (cyt c) from mitochondria and out of cell is an important signal of cell apoptosis. Monitoring this process extracellularly without invasion and cytotoxicity to cells is of great importance to understand certain diseases at the cellular level; however, it requires sensors with ultrahigh sensitivity and miniature size. This study reports an optical microfiber aptasensor with a silver-decorated graphene (Ag@RGO) nanointerface for real-time cellular cyt c monitoring. Owing to an interfacial sensitization effect coupled with the plasmonic electromagnetic enhancement of silver nanoparticles and chemical enhancement of graphene platforms, which enhances the energy density on microfiber surface obviously, the lowest limit of detection achieved is 6.82 × 10-17 m, which is approximately five orders of magnitude lower than those of existing methods. This microfiber successfully detects the ultralow concentrations of cyt c present during the initial stage of apoptosis in situ. As the microfiber functionalized by Ag@RGO nanointerface can be varied to meet any specific detection objective, this work opens up new opportunities to quantitatively monitor biological functions occurring at the cellular level.

Recent Advances in the Detection of Neurotransmitters

Neurotransmitters are chemicals that act as messengers in the synaptic transmission process. They are essential for human health and any imbalance in their activities can cause serious mental disorders such as Parkinson’s disease, schizophrenia, and Alzheimer’s disease. Hence, monitoring the concentrations of various neurotransmitters is of great importance in studying and diagnosing such mental illnesses. Recently, many researchers have explored the use of unique materials for developing biosensors for both in vivo and ex vivo neurotransmitter detection. A combination of nanomaterials, polymers, and biomolecules were incorporated to implement such sensor devices. For in vivo detection, electrochemical sensing has been commonly applied, with fast-scan cyclic voltammetry being the most promising technique to date, due to the advantages such as easy miniaturization, simple device architecture, and high sensitivity. However, the main challenges for in vivo electrochemical neurotransmitter sensors are limited target selectivity, large background signal and noise, and device fouling and degradation over time. Therefore, achieving simultaneous detection of multiple neurotransmitters in real time with long-term stability remains the focus of research. The purpose of this review paper is to summarize the recently developed sensing techniques with the focus on neurotransmitters as the target analyte, and to discuss the outlook of simultaneous detection of multiple neurotransmitter species. This paper is organized as follows: firstly, the common materials used for developing neurotransmitter sensors are discussed. Secondly, several sensor surface modification approaches to enhance sensing performance are reviewed. Finally, we discuss recent developments in the simultaneous detection capability of multiple neurotransmitters.

Improved detection sensitivity of γ-aminobutyric acid based on graphene oxide interface on an optical microfiber

A graphene oxide interface has been constructed between silica microfiber and bio-recognition elements to develop an improved γ-aminobutyric acid sensing approach.

Label-Free Detection of Cancer Biomarkers Using an In-Line Taper Fiber-Optic Interferometer and a Fiber Bragg Grating

A compact and label-free optical fiber sensor based on a taper interferometer cascaded with a fiber Bragg grating (FBG) is proposed and experimentally demonstrated for detection of a breast cancer biomarker (HER2). The tapered fiber-optic interferometer is extremely sensitive to the ambient refractive index (RI). In addition, being insensitive to the RI variation, the FBG can be applied as a temperature thermometer due to its independent response to the temperature. Surface functionalization to the sensor is carried out to achieve specific targeting of the unlabeled biomarkers. The result shows that the proposed sensor presents a low limit-of-detection (LOD) of 2 ng/mL, enabling its potentials of application in early diagnosis on the breast cancer.