Development of a multi-analysis model using an epithelial-fibroblast co-culture system as an alternative to animal testing

The evaluation of respiratory chemical substances has been mostly performed in animal tests (OECD TG 403, TG 412, TG 413, etc.). However, there have been ongoing discussions about the limited use of these inhalation toxicity tests due to differences in the anatomical structure of the respiratory tract, difficulty in exposure, laborious processes, and ethical reasons. Alternative animal testing methods that mimic in vivo testing are required. Therefore, in this study, we established a co-culture system composed of differentiated epithelial cells under an air-liquid interface (ALI) system in the apical part and fibroblasts in the basal part. This system was designed to mimic the wound-healing mechanism in the respiratory system. In addition, we developed a multi-analysis system that simultaneously performs toxicological and functional evaluations. Several individual assays were used sequentially in a multi-analysis model for pulmonary toxicity. Briefly, cytokine analysis, histology, and cilia motility were measured in the apical part, and cell migration and gel contraction assay were performed by exposing MRC-5 cells to the basal culture. First, human airway epithelial cells from bronchial (hAECB) were cultured under air-liquid interface (ALI) system conditions and validated pseudostratified epithelium by detecting differentiation-related epithelial markers using Transepithelial Electrical Resistance (TEER) measurement, Hematoxylin and Eosin (H&E) staining, and immunocytochemistry (ICC) staining. Afterward, the co-culture cells exposed to Transforming growth factor-beta 1 (TGF-β1), a key mediator of pulmonary fibrosis, induced significant toxicological responses such as cytotoxicity, cell migration, and gel contraction, which are wound-healing markers. In addition, cilia motility in epithelial cells was significantly decreased compared to control. Therefore, the multi-analysis model with a 3D epithelial-fibroblast co-culture system is expected to be useful in predicting pulmonary toxicity as a simple and efficient high-throughput screening method and as an alternative to animal testing.

Advances of 3D Cell Co-Culture Technology Based on Microfluidic Chips

Cell co-culture technology aims to study the communication mechanism between cells and to better reveal the interactions and regulatory mechanisms involved in processes such as cell growth, differentiation, apoptosis, and other cellular activities. This is achieved by simulating the complex organismic environment. Such studies are of great significance for understanding the physiological and pathological processes of multicellular organisms. As an emerging cell cultivation technology, 3D cell co-culture technology, based on microfluidic chips, can efficiently, rapidly, and accurately achieve cell co-culture. This is accomplished by leveraging the unique microchannel structures and flow characteristics of microfluidic chips. The technology can simulate the native microenvironment of cell growth, providing a new technical platform for studying intercellular communication. It has been widely used in the research of oncology, immunology, neuroscience, and other fields. In this review, we summarize and provide insights into the design of cell co-culture systems on microfluidic chips, the detection methods employed in co-culture systems, and the applications of these models.

A miniaturized multicellular platform to mimic the 3D structure of the alveolar-capillary barrier

Several diseases affect the alveoli, and the efficacy of medical treatments and pharmaceutical therapies is hampered by the lack of pre-clinical models able to recreate in vitro the diseases. Microfluidic devices, mimicking the key structural and compositional features of the alveoli, offer several advantages to medium and high-throughput analysis of new candidate therapies. Here, we developed an alveolus-on-a-chip recapitulating the microanatomy of the physiological tissue by including the epithelium, the fibrous interstitial layer and the capillary endothelium. A PDMS device was obtained assembling a top layer and a bottom layer obtained by replica molding. A polycaprolactone/gelatin (PCL-Gel) electrospun membrane was included within the two layers supporting the seeding of 3 cell phenotypes. Epithelial cells were grown on a fibroblast-laden collagen hydrogel located on the top side of the PCL-Gel mats while endothelial cells were seeded on the basolateral side of the membrane. The innovative design of the microfluidic device allows to replicate both cell-cell and cell-extracellular matrix interactions according to the in vivo cell arrangement along with the establishment of physiologically relevant air-liquid interface conditions. Indeed, high cell viability was confirmed for up to 10 days and the formation of a tight endothelial and epithelial barrier was assessed by immunofluorescence assays.

Advanced 3D In Vitro Lung Fibrosis Models: Contemporary Status, Clinical Uptake, and Prospective Outlooks

Fibrosis has been characterized as a global health problem and ranks as one of the primary causes of organ dysfunction. Currently, there is no cure for pulmonary fibrosis, and limited therapeutic options are available due to an inadequate understanding of the disease pathogenesis. The absence of advanced in vitro models replicating dynamic temporal changes observed in the tissue with the progression of the disease is a significant impediment in the development of novel antifibrotic treatments, which has motivated research on tissue-mimetic three-dimensional (3D) models. In this review, we summarize emerging trends in preparing advanced lung models to recapitulate biochemical and biomechanical processes associated with lung fibrogenesis. We begin by describing the importance of in vivo studies and highlighting the often poor correlation between preclinical research and clinical outcomes and the limitations of conventional cell culture in accurately simulating the 3D tissue microenvironment. Rapid advancement in biomaterials, biofabrication, biomicrofluidics, and related bioengineering techniques are enabling the preparation of in vitro models to reproduce the epithelium structure and operate as reliable drug screening strategies for precise prediction. Improving and understanding these model systems is necessary to find the cross-talks between growing cells and the stage at which myofibroblasts differentiate. These advanced models allow us to utilize the knowledge and identify, characterize, and hand pick medicines beneficial to the human community. The challenges of the current approaches, along with the opportunities for further research with potential for translation in this field, are presented toward developing novel treatments for pulmonary fibrosis.

Development of biomimetic co-culture and tri-culture models to mimic the complex structure of the alveolar-capillary barrier

Alveoli are the functional area of respiratory system where the gaseous exchanges take place at level of the alveolar-capillary barrier. The development of safe and effective therapeutic approaches for treating lung disease is currently limited due to the lack of realistic preclinical models for their testing and validation. In this work, tissue engineering approaches were exploited to develop a biomimetic platform that provide an appropriate mimicking of the extracellular environment and the multicellular architecture of human alveoli. Here, we propose the implementation of two biomimetic in vitro models to reproduce the features of the main anatomic portions of the physiological alveolar-capillary barrier. First, a co-culture barrier model was obtained by integrating an electrospun polycaprolactone-gelatin (PCL-Gel) membrane in a modified transwell insert (PCL-Gel TW) to mimic the alveolar basement membrane (coded as thin model). Alveolar epithelial (A549) and lung microvascular endothelial (HULEC-5a) cells were cultured on the apical and basolateral side of the PCL-Gel membrane, respectively, under physiologic air-liquid interface (ALI) conditions for 7 days. The ALI condition promoted the expression of type I and type II alveolar epithelial cell markers and the secretion of mucus in A549 cells. Increased cell viability and barrier properties in co-cultures of A549 and HULEC-5a compared to mono-cultures revealed the effectiveness of the model to reproduce in vitro physiological-relevant features of the alveolar-capillary barrier. The second portion of the alveolar-capillary barrier was developed implementing a tri-culture model (coded as thick model) including a type I collagen (COLL) hydrogel formulated to host lung fibroblasts (MRC-5). The thick barrier model was implemented by seeding HULEC-5a on the basolateral side of PCL-Gel TW and then pouring sequentially MRC-5-laden COLL hydrogel and A549 cells on the apical side of the electrospun membrane. The thick model was maintained up to 7 days at ALI and immunofluorescence staining of tight and adherent junctions demonstrated the formation of a tight barrier. Lastly, the ability of models to emulate pathological inflammatory conditions was validated by exposing the apical compartment of the PCL-Gel TW to lipopolysaccharide (LPS). The damage of A549 tight junctions, the increase of barrier permeability and IL-6 pro-inflammatory cytokine release was observed after 48 h exposure to LPS.

Comparing species-different responses in pulmonary fibrosis research: Current understanding of in vitro lung cell models and nanomaterials

Pulmonary fibrosis (PF) is a chronic, irreversible lung disease that is typically fatal and characterized by an abnormal fibrotic response. As a result, vast areas of the lungs are gradually affected, and gas exchange is impaired, making it one of the world's leading causes of death. This can be attributed to a lack of understanding of the onset and progression of the disease, as well as a poor understanding of the mechanism of adverse responses to various factors, such as exposure to allergens, nanomaterials, environmental pollutants, etc. So far, the most frequently used preclinical evaluation paradigm for PF is still animal testing. Nonetheless, there is an urgent need to understand the factors that induce PF and find novel therapeutic targets for PF in humans. In this regard, robust and realistic in vitro fibrosis models are required to understand the mechanism of adverse responses. Over the years, several in vitro and ex vivo models have been developed with the goal of mimicking the biological barriers of the lung as closely as possible. This review summarizes recent progress towards the development of experimental models suitable for predicting fibrotic responses, with an emphasis on cell culture methods, nanomaterials, and a comparison of results from studies using cells from various species.

Novel drug delivery systems and disease models for pulmonary fibrosis

Pulmonary fibrosis (PF) is a serious and progressive lung disease which is possibly life-threatening. It causes lung scarring and affects lung functions including epithelial cell injury, massive recruitment of immune cells and abnormal accumulation of extracellular matrix (ECM). There is currently no cure for PF. Treatment for PF is aimed at slowing the course of the disease and relieving symptoms. Pirfenidone (PFD) and nintedanib (NDNB) are currently the only two FDA-approved oral medicines to slow down the progress of idiopathic pulmonary fibrosis, a specific type of PF. Novel drug delivery systems and therapies have been developed to improve the prognosis of the disease, as well as reduce or minimize the toxicities during drug treatment. The drug delivery routes for these therapies are various including oral, intravenous, nasal, inhalant, intratracheal and transdermal; although this is dependent on specific treatment mechanisms. In addition, researchers have also expanded current animal models that could not fully restore the clinicopathology, and developed a series of in vitro models such as organoids to study the pathogenesis and treatment of PF. This review describes recent advances on pathogenesis exploration, classifies and specifies the progress of drug delivery systems by their delivery routes, as well as an overview on the in vitro and in vivo models for PF research.

A drug-responsive multicellular human spheroid model to recapitulate drug-induced pulmonary fibrosis

Associated with a high mortality rate, pulmonary fibrosis (PF) is the end stage of several interstitial lung diseases. Although many factors are linked to PF progression, initiation of the fibrotic process remains to be studied. Current research focused on generating new strategies to gain a better understanding of the underlying disease mechanism as the animal models remain insufficient to reflect human physiology. Herein, to account complex cellular interactions within the fibrotic tissue, a multicellular spheroid (MCS) model where human bronchial epithelial cells incorporated with human lung fibroblasts was generated and treated with bleomycin (BLM) to emulate drug-induced PF. Recapitulating the epithelial-interstitial microenvironment, the findings successfully reflected the PF disease, where excessive alpha smooth muscle actin (α-SMA) and collagen type I secretion were noted along with the morphological changes in response to BLM. Moreover, increased levels of fibrotic linked COL13A1, MMP2, WNT3 and decreased expression level of CDH1 provide evidence for the model reliability on fibrosis modelling. Subsequent administration of the FDA approved nintedanib and pirfenidone anti-fibrotic drugs proved the drug-responsiveness of the model.

Comparison of 3D airway models for the assessment of fibrogenic chemicals

Lung epithelial cells and fibroblasts play key roles in pulmonary fibrosis and are involved in fibrotic signaling and production of the extracellular matrix (ECM), respectively. Recently, 3D airway models consisting of both cell types have been developed to evaluate the fibrotic responses while facilitating cell-cell crosstalk. This study aimed to evaluate the fibrotic responses in these models using different fibrogenic agents, which are known as key events in adverse outcome pathways of pulmonary fibrosis. We quantified cell injury and several sequential steps in fibrogenesis, including inflammation, the epithelial-mesenchymal transition (EMT), fibroblast activation, and ECM accumulation, using two different 3D airway models, the EpiAirway™-full thickness (Epi/FT) and MucilAir™-human fibroblast (Mucil/HF) models. In the Epi/FT model, fibrogenic agents induced the expression of inflammation and EMT-associated markers, while in the Mucil/HF model, they induced fibroblast activation and ECM accumulation. Using this information, we conducted gene ontology term network analysis. In the Epi/FT model, the terms associated with cell migration and response to stimulus made up a large part of the network. In the Mucil/HF model, the terms associated with ECM organization and cell differentiation and proliferation constituted a great part of the network. Collectively, our data suggest that polyhexamethyleneguanidine phosphate and bleomycin induce different responses in the two 3D airway models. While Epi/FT was associated with inflammatory/EMT-associated responses, Mucil/HF was associated with fibroblast-associated responses. This study will provide an important basis for selecting proper 3D airway models and fibrogenic agents to further research or screen chemicals causing inhalation toxicity.

Replacement Strategies for Animal Studies in Inhalation Testing

Animal testing is mandatory in drug testing and is the gold standard for toxicity and efficacy evaluations. This situation is expected to change in the future as the 3Rs principle, which stands for the replacement, reduction, and refinement of the use of animals in science, is reinforced by many countries. On the other hand, technologies for alternatives to animal testing have increased. The need to develop and use alternatives depends on the complexity of the research topic and also on the extent to which the currently used animal models can mimic human physiology and/or exposure. The lung morphology and physiology of commonly used animal species differs from that of human lungs, and the realistic inhalation exposure of animals is challenging. In vitro and in silico methods can assess important aspects of the in vivo effects, namely particle deposition, dissolution, action at, and permeation through, the respiratory barrier, and pharmacokinetics. This review discusses the limitations of animal models and exposure systems and proposes in vitro and in silico techniques that could, when used together, reduce or even replace animal testing in inhalation testing in the future.

Association of PM2.5 with Insulin Resistance Signaling Pathways on a Microfluidic Liver-Kidney Microphysiological System (LK-MPS) Device

Insulin resistance (IR) is a typical sign of metabolic dysregulation caused by fine particulate matter (PM_2.5), but the underlying signaling has not been clearly determined. Herein, a microfluidic liver-kidney microphysiological system (LK-MPS) is presented to assess the signaling pathways of IR generated by PM_2.5 at 200 μg/mL for 24 h. The LK-MPS device consisted of a biomimetic liver-kidney architecture and reconstructed two circulation paths: the liver metabolism-kidney excretion (LM-KE) and kidney excretion-liver metabolism (KE-LM), by which PM_2.5 is feasibly distributed in the two organs. Transmission electron microscopy (TEM) analysis revealed that PM_2.5 can embed in the cytoplasm and nuclei, undergo transport by vesicles, and lead to the destruction of mitochondria. Further comprehensive immunofluorescence, enzyme-linked immunosorbent assays (ELISAs) and untargeted metabolomic analyses confirmed that PM_2.5 disturbed the classic IRS-1/AKT signaling pathway (INSR, IRS-1, PI3K, AKT, GLUT2, GLUT4, and FOXO1 downregulated) and IR-related metabolic pathways: UDP-hexosamine (UDP-GlcNAc), gluconeogenesis (β-d-glucose 6-phosphate), and lipid biosynthesis (ceramide (Cer) and triacylglycerol (TG)) pathways, leading to the disorder of glucose levels. Collectively, these disorders aggravate hepatic and renal IR. Pearson's correlation coefficient test showed that elemental carbon (EC), polycyclic aromatic hydrocarbons (PAHs), and metals (Ca, Co, and V) were negatively correlated to the dysregulated proteins (INSR, IRS-1, AKT, FOXO1, GLUT2, and GLUT4). These findings may partially explain IR-related signaling pathways triggered by PM_2.5.

Human lung-on-chips: Advanced systems for respiratory virus models and assessment of immune response

Respiratory viral infections are leading causes of death worldwide. A number of human respiratory viruses circulate in all age groups and adapt to person-to-person transmission. It is vital to understand how these viruses infect the host and how the host responds to prevent infection and onset of disease. Although animal models have been widely used to study disease states, incisive arguments related to poor prediction of patient responses have led to the development of microfluidic organ-on-chip models, which aim to recapitulate organ-level physiology. Over the past decade, human lung chips have been shown to mimic many aspects of the lung function and its complex microenvironment. In this review, we address immunological responses to viral infections and elaborate on human lung airway and alveolus chips reported to model respiratory viral infections and therapeutic interventions. Advances in the field will expedite the development of therapeutics and vaccines for human welfare.

Cellular senescence and EMT crosstalk in bleomycin-induced pathogenesis of pulmonary fibrosis-an in vitro analysis

With poor prognosis and aberrant lung remodeling, pulmonary fibrosis exhibits worldwide prevalence accompanied by an increase in burden in terms of hospitalization and death. Apart from genetic and non-genetic factors, fibrosis occurs as a side effect of bleomycin antineoplastic activity. Elucidating the cellular and molecular mechanism could help in the development of effective anti-fibrotic treatment strategies. In the present study, we investigated the underlying mechanism behind bleomycin-induced fibrosis using human alveolar epithelial cells (A549 cells). On the basis of the experimental observation, it was demonstrated that with transforming growth factor-β (TGF-β) as a central mediator of fibrosis progression, a cross-talk between epithelial-mesenchymal transition (EMT) and senescence upon bleomycin treatment occurs. This results in the advancement of this serious fibrotic condition. Fibrosis was initiated through integrin activation and imbalance in the redox state (NOX expression) of the cell. It progressed along the TGF-β-mediated non-canonical pathway (via ERK phosphorylation) followed by the upregulation of α-smooth muscle actin and collagen synthesis. Additionally, in this process, the loss of the epithelial marker E-cadherin was observed. Furthermore, the expressions of senescence markers, such as p21 and p53, were upregulated upon bleomycin treatment, thereby intensifying the fibrotic condition. Accordingly, the molecular pathway mediating the bleomycin-induced fibrosis was explored in the current study.