Preparation and Electrical Properties of Polyacrylonitrile Based Porous Carbon by Different Activation Methods

Polyacrylonitrile (PAN)-based porous carbon was prepared by different methods of activation with PAN polymer microsphere as precursor. The morphology, structure and electrical properties for supercapacitor of the porous carbon were investigated. It was found that the morphology of PAN nanospheres tended to be destroyed in the process of one-step activation (activation and carbonization were carried out simultaneously, and could only be retained when the amount of activating agent KOH was small). While the spherical morphology could be well reserved during the two-step activation method (carbonization and activation sequentially). The specific surface area and pore volume increased first and then decreased, with the increase in activation holding time for both one-step and two-step activation methods. The specific surface area reached the maximum value with 2430 m² g⁻¹ for the one-step activation method and 2830 m² g⁻¹ for the two-step activation method. Additionally, their mass-specific capacitances were 178.8 F g⁻¹ and 160.2 F g⁻¹, respectively, under the current density of 1 A g⁻¹. After 2000 cycles, the specific capacitance retentions were 92.9% and 91.3%.

Mechanochemically Synthetized PAN-Based Co-N-Doped Carbon Materials as Electrocatalyst for Oxygen Evolution Reaction

We report a new class of polyacrylonitrile (PAN)-based Co-N-doped carbon materials that can act as suitable catalyst for oxygen evolution reactions (OER). Different Co loadings were mechanochemically added into post-consumed PAN fibers. Subsequently, the samples were treated at 300 °C under air (PAN-A) or nitrogen (PAN-N) atmosphere to promote simultaneously the Co₃O₄ species and PAN cyclization. The resulting electrocatalysts were fully characterized and analyzed by X-ray diffraction (XRD) and photoelectron spectroscopy (XPS), transmission (TEM) and scanning electron (SEM) microscopies, as well as nitrogen porosimetry. The catalytic performance of the Co-N-doped carbon nanomaterials were tested for OER in alkaline environments. Cobalt-doped PAN-A samples showed worse OER electrocatalytic performance than their homologous PAN-N ones. The PAN-N/3% Co catalyst exhibited the lowest OER overpotential (460 mV) among all the Co-N-doped carbon nanocomposites, reaching 10 mA/cm². This work provides in-depth insights on the electrocatalytic performance of metal-doped carbon nanomaterials for OER.

Nanoparticle-based polyacrylonitrile monolithic column for highly efficient micro solid-phase extraction of carotenoids and vitamins in human serum

In this work, a biocompatible monolithic column based micro-solid-phase extraction (µ-SPE) method was developed for biological fluid analysis. A novel nanoparticle-based polyacrylonitrile monolithic column (C30 NP-PMC) was fabricated by incorporating triacontyl (C30) modified silica nanoparticles (NPs) into the polyacrylonitrile monolithic matrix through thermally induced phase separation. With efficient mass transfer and sorption capacity, C30 NP-PMC exhibited outstanding performance for the extraction of carotenoids and fat-soluble vitamins (FSVs) from human serum samples, superior to commercial C18 cartridges as well as liquid-liquid extraction (LLE) method. Under optimal conditions, the proposed µ-SPE method coupled with high-performance liquid chromatography-diode array detection (HPLC-DAD) achieved satisfactory limits of detection (LODs) (1.5-75.0 ng/mL) and good recoveries (85.0-106.5 %) with relative standard deviations (RSDs) of less than 12.1% by consuming lower sorbent (35.0 mg) and organic solvent (0.8 mL). Successful application of the developed method demonstrated the great potential of such monolithic sorbents for efficient isolation and preconcentration of trace analytes from blood samples.

A Role of Activators for Efficient CO2 Affinity on Polyacrylonitrile-Based Porous Carbon Materials

Herein, we investigated polyacrylonitrile (PAN)-based porous activated carbon sorbents as an efficient candidate for CO2 capture. In this research, an easy and an economical method of chemical activation and carbonization was used to generate activated PAN precursor (PAN-C) adsorbents. The influence of various activators including NaOH, KOH, K2CO3, and KNO3 on the textural features of PAN-C and their CO2 adsorption performance under different temperatures was examined. Among the investigated adsorbents, PANC-NaOH and PANC-KOH exhibited high specific surface areas (2,012 and 3,072 m2 g-1), with high microporosity (0.82 and 1.15 cm3 g-1) and large amounts of carbon and nitrogen moieties. The PAN-C activated with NaOH and KOH showed maximum CO2 uptakes of 257 and 246 mg g-1 at 273 K and 163 and 155 mg g-1 at 298 K, 1 bar, respectively, which was much higher as compared to the inactivated PAN-C precursor (8.9 mg g-1 at 273 K and 1 bar). The heat of adsorption (Q st) was in the range 10.81-39.26 kJ mol-1, indicating the physisorption nature of the CO2 adsorption process. The PAN-C-based activated adsorbents demonstrated good regeneration ability over repeated adsorption cycles. The current study offers a facile two-step fabrication method to generate efficient activated porous carbon materials from inexpensive and readily available PAN for use as CO2 adsorbents in environmental applications.

Fishnet-Like, Nitrogen-Doped Carbon Films Directly Anchored on Carbon Cloths as Binder-Free Electrodes for High-Performance Supercapacitor

The low specific capacitance and energy density of carbon electrode has extremely limited the wide application of supercapacitors. For developing a high-performance carbon electrode using a simple and effective method, a fishnet-like, N-doped porous carbon (FNPC) film is prepared by calcining the KOH-activated polyindole precoated on carbon cloths. The FNPC film is tightly anchored on carbon cloths without any binder. The FNPC film with 3.8 at% N content exhibits a fairly high specific capacitance of 416 F g^-1 at 1.0 A g^-1. Moreover, the assembled button-type cell with two FNPC film electrodes shows a high energy density of 16.4 Wh kg^-1, a high power density of 67.4 kW kg^-1, and long-term cyclic stability of 92% of the initial capacitance after 10 000 cycles at 10 A g^-1. The high performances mainly came from the integration of pseudocapacitance and electrical double-layer capacitance behavior, wettability, fishnet-like nanostructure, as well as the low interfacial resistivity. This strategy provides a practical, uncomplicated, and low-cost design of binder-free flexible carbon materials electrode for high-performance supercapacitors.