Preparation of Nanocellulose from Coffee Pulp and Its Potential as a Polymer Reinforcement

Coffee is one of the most valued agricultural products regarding its high commercialization rate. During the production of coffee beans, coffee pulp is obtained as one of the main byproducts with a cellulose content of more than 30% of dry weight. This research focused on the value-added potential of coffee pulp fiber as the reinforcement in composite materials. The nanocellulose coffee pulp (NCP) from the coffee pulp (CP) was prepared and subsequently used as a filler to reinforce the polyvinyl alcohol (PVA) matrix for the improvement of PVA composite properties. The CP was treated via alkali and bleaching treatment before the production of NCP using the acid hydrolysis treatment. The TEM result of NCP showed the successful preparation of NCP with an average diameter of 16.03 ± 4.70 nm with increasing crystallinity size and crystallinity index. The effect of glycerol (G) in the PVA matrix was observed. The result showed that glycerol had a play-role as a plasticizer for increased flexibility and decreased hardness and brittleness of PVA nanocomposite film. The nanocomposite film of PVA/G/NCP was fabricated with various ratios of NCP through the casting method. It was shown that the physical properties were improved with the presence of NCP in the PVA matrix compared to the neat PVA film.

Polyvinyl alcohol/gelatin hydrogels regulate cell adhesion and chromatin accessibility

Cell adhesion has a critical influence on various processes such as cancer metastasis and wound healing. Many substrates have been used for studying cell adhesion and its related biological processes, it is still highly desirable to have a simply prepared and low-cost substrate suitable for regulating cell adhesion. In this study, we produced a series of polyvinyl alcohol/gelatin hydrogels with different gelatin concentrations via dry-annealing method. Our data showed that the protein adsorbing capability was enhanced and cell adhesion area and the ratio of non-spherical cells were increased with the increment of gelatin concentration. We also observed that varying cell adhesion conditions induced by polyvinyl alcohol /gelatin hydrogels resulted in expression level changes of genes involved in mechanotransduction from extracellular matrices (ECM) to the nucleus. In particular, we detected a widespread increase in chromatin accessibility under poor cell adhesion condition. This work provides a useful hydrogel system for regulating cell adhesion and opens up new possibilities for the design of biomaterials for cell adhesion study.

Solvent-Free Polycaprolactone Dissolving Microneedles Generated via the Thermal Melting Method for the Sustained Release of Capsaicin

(1) Background: Dissolving microneedles (DMNs), a transdermal drug delivery system, have been developed to treat various diseases in a minimally invasive, painless manner. However, the currently available DMNs are based on burst release systems due to their hydrophilic backbone polymer. Although hydrophobic biodegradable polymers have been employed on DMNs for sustained release, dissolution in an organic solvent is required for fabrication of such DMNs. (2) Method: To overcome the aforementioned limitation, novel separable polycaprolactone (PCL) DMNs (SPCL-DMNs) were developed to implant a PCL-encapsulated drug into the skin. PCL is highly hydrophobic, degrades over a long time, and has a low melting point. Under thermal melting, PCL encapsulated capsaicin and could be fabricated into a DMN without the risk of toxicity from an organic solvent. (3) Results: Optimized SPCL-DMNs, containing PCL (height 498.3 ± 5.8 µm) encapsulating 86.66 ± 1.13 µg capsaicin with a 10% (w/v) polyvinyl alcohol and 20% (w/v) polyvinylpyrrolidone mixture as a base polymer, were generated. Assessment of the drug release profile revealed that this system could sustainably release capsaicin for 15 days from PCL being implanted in porcine skin. (4) Conclusion: The implantable SPCL-DMN developed here has the potential for future development of toxicity-free, sustained release DMNs.

Application of Biodegradable and Biocompatible Nanocomposites in Electronics: Current Status and Future Directions

With the continuous increase in the production of electronic devices, large amounts of electronic waste (E-waste) are routinely being discarded into the environment. This causes serious environmental and ecological problems because of the non-degradable polymers, released hazardous chemicals, and toxic heavy metals. The appearance of biodegradable polymers, which can be degraded or dissolved into the surrounding environment with no pollution, is promising for effectively relieving the environmental burden. Additionally, biodegradable polymers are usually biocompatible, which enables electronics to be used in implantable biomedical applications. However, for some specific application requirements, such as flexibility, electric conductivity, dielectric property, gas and water vapor barrier, most biodegradable polymers are inadequate. Recent research has focused on the preparation of nanocomposites by incorporating nanofillers into biopolymers, so as to endow them with functional characteristics, while simultaneously maintaining effective biodegradability and biocompatibility. As such, bionanocomposites have broad application prospects in electronic devices. In this paper, emergent biodegradable and biocompatible polymers used as insulators or (semi)conductors are first reviewed, followed by biodegradable and biocompatible nanocomposites applied in electronics as substrates, (semi)conductors and dielectrics, as well as electronic packaging, which is highlighted with specific examples. To finish, future directions of the biodegradable and biocompatible nanocomposites, as well as the challenges, that must be overcome are discussed.

Powering the Environmental Internet of Things

The Internet of Things (IoT) is a constantly-evolving area of research and touches almost every aspect of life in the modern world. As technology moves forward, it is becoming increasingly important for these IoT devices for environmental sensing to become self-powered to enable long-term operation. This paper provides an outlook on the current state-of-the-art in terms of energy harvesting for these low-power devices. An analytical approach is taken, first defining types of environments in which energy-harvesters operate, before exploring both well-known and novel energy harvesting techniques and their uses in modern-day sensing.

Processing Techniques for Bioresorbable Nanoparticles in Fabricating Flexible Conductive Interconnects

Bioresorbable electronics (or transient electronics) devices can be potentially used to replace build-to-last devices in consumer electronics, implantable devices, and data security, leading to reduced electronic waste and surgical processes through controllable dissolution. Recent development of printing bioresorbable electronics leads to bioresorbable conductive pastes or inks that can be used to make interconnects, circuit traces, and sensors, offering alternative solutions for the predominant complementary metal oxide semiconductor (CMOS) processes in fabrication of bioresorbable electronics. However, the conductivities offered by current bioresorbable pastes and processing techniques are still much lower than those of the bulk metals, demanding further improvement in both paste composition and process optimization. This paper aims at exploring several influential factors such as paste compositions and processing techniques in determining conductivities of bioresorbable patterns. Experimental results reveal that an optimized paste constituent with a ratio of Zn:PVP:glycerol:methanol = 7:0.007:2:1 by weight can generate stable conductive pastes suitable for a screen printing process. In addition, a high conductivity of 60,213.6 S/m can be obtained by combining hot rolling and photonic sintering. The results demonstrate that large-scale transient electronics can be obtained by combining screen printing, hot rolling and photonic sintering approaches with optimized paste compositions, offering important experimental proofs and approaches for further improving the conductivity of bioresorbable pastes or inks that can accommodate the demands for mass fabrication and practical use in electronic industry.