Ultrasonication-assisted synthesis of high aspect ratio gold nanowires on a graphene template and investigation of their growth mechanism

Single gold nanowires with ultrahigh (>104) aspect ratios by triphasic electrodeposition

Due to their superior optical and electrical properties, gold nanowires are used ubiquitously across industries. Current techniques for fabricating such structures are often expensive, involving multiple steps, cleanroom operation, and limited ability for a user to controllably place a nanowire at a desired location. Here, we introduce the concept of triphasic electrodeposition, where metal salts act as antagonistic salts at the liquid|liquid interface, leading to their increased concentration at this phase boundary. We show that the electrodeposition of ultra-high aspect ratio gold nanowires may be achieved in a one-step, one-pot method by submerging a conductor in contact with two phases: an organic phase containing HAuCl4 and a quaternary ammonium salt, and an aqueous phase containing potassium chloride. Changing electrodeposition parameters in the triphasic system allows tunability of important features of the nanowire, such as size and thickness. Furthermore, this new method provides an impressive ability to choose the geometry and precise positioning of deposited nanowires simply by changing where a liquid|liquid interface contacts the electrode surface.

Metal nanowire-based transparent electrode for flexible and stretchable optoelectronic devices

High-quality transparent electrodes are indispensable components of flexible optoelectronic devices as they guarantee sufficient light transparency and electrical conductivity. Compared to commercial indium tin oxide, metal nanowires are considered ideal candidates as flexible transparent electrodes (FTEs) owing to their superior optoelectronic properties, excellent mechanical flexibility, solution treatability, and higher compatibility with semiconductors. However, certain key challenges associated with material preparation and device fabrication remain for the practical application of metal nanowire-based electrodes. In this review, we discuss state-of-the-art solution-processed metal nanowire-based FTEs and their applications in flexible and stretchable optoelectronic devices. Specifically, the important properties of FTEs and a cost-benefit analysis of existing technologies are introduced, followed by a summary of the synthesis strategy, key properties, and fabrication technologies of the nanowires. Subsequently, we explore the applications of metal-nanowire-based FTEs in different optoelectronic devices including solar cells, photodetectors, and light-emitting diodes. Finally, the current status, future challenges, and emerging strategies in this field are presented.

Nonlinear Optical Activities in Two-Dimensional Gallium Sulfide: A Comprehensive Study

The nonlinear optical (NLO) properties of two-dimensional (2D) materials are fascinating for fundamental physics and optoelectronic device development. However, relatively few investigations have been conducted to establish the combined NLO activities of a 2D material. Herein, a study of numerous NLO properties of 2D gallium sulfide (GaS), including second-harmonic generation (SHG), two-photon excited fluorescence (TPEF), and NLO absorption are presented. The layer-dependent SHG response of 2D GaS identifies the noncentrosymmetric nature of the odd layers, and the second-order susceptibility (χ²) value of 47.98 pm/V (three-layers of GaS) indicates the superior efficiency of the SHG signal. In addition, structural deformation induces the symmetry breaking and facilitates the SHG in the bulk samples, whereas a possible efficient symmetry breaking in the liquid-phase exfoliated samples results in an enhancement of the SHG signal, providing prospective fields of investigation for researchers. The generation of TPEF from 800 to 860 nm depicts the two-photon absorption characteristics of 2D GaS material. Moreover, the saturable absorption characteristics of 2D GaS are realized from the largest nonlinear absorption coefficient (β) of -9.3 × 10³, -91.0 × 10³, and -6.05 × 10³ cm/GW and giant modulation depths (T_s) of 24.4%, 35.3%, and 29.1% at three different wavelengths of 800, 1066, and 1560 nm, respectively. Hence, such NLO activities indicate that 2D GaS material can facilitate in the technical advancements of future nonlinear optoelectronic devices.

Nanowelding in Whole-Lifetime Bottom-Up Manufacturing: From Assembly to Service

The continuous miniaturization of microelectronics is pushing the transformation of nanomanufacturing modes from top-down to bottom-up. Bottom-up manufacturing is essentially the way of assembling nanostructures from atoms, clusters, quantum dots, etc. The assembly process relies on nanowelding which also existed in the synthesis process of nanostructures, construction and repair of nanonetworks, interconnects, integrated circuits, and nanodevices. First, many kinds of novel nanomaterials and nanostructures from 0D to 1D, and even 2D are synthesized by nanowelding. Second, the connection of nanostructures and interfaces between metal/semiconductor-metal/semiconductor is realized through low-temperature heat-assisted nanowelding, mechanical-assisted nanowelding, or cold welding. Finally, 2D and 3D interconnects, flexible transparent electrodes, integrated circuits, and nanodevices are constructed, functioned, or self-healed by nanowelding. All of the three nanomanufacturing stages follow the rule of "oriented attachment" mechanisms. Thus, the whole-lifetime bottom-up manufacturing process from the synthesis and connection of nanostructures to the construction and service of nanodevices can be organically integrated by nanowelding. The authors hope this review can bring some new perspective in future semiconductor industrialization development in the expansion of multi-material systems, technology pathway for the refined design, controlled synthesis and in situ characterization of complex nanostructures, and the strategies to develop and repair novel nanodevices in service.

Auxiliary alkyl chain modulated spin crossover behaviour of [Fe(H2Bpz2)2(Cn-bipy)] complexes

Three new alkyl chain substituted complexes [Fe(H2Bpz2)2(Cn-bipy)] (pz = pyrazolyl, Cn-bipy = bipyridine alkyl chain diester, n = 3 (3), 4 (4) and 5 (5)) show versatile spin state switching behaviour with different "tail" lengths as revealed by structural and magnetic analyses. The most striking phenomenon is observed for 5 which undergoes an abrupt spin transition accompanied by thermal hysteresis of ca. 10 K, which is attributed to crystal packing effects derived from the competition between ππ and C-HO interactions. Interestingly, each of the complexes exhibits similar gradual and complete spin crossover in methanol solution with a transition temperature around 249 K, as deduced from temperature-dependent UV-vis spectroscopy. This highlights the differences between the solid state (ligand field; crystal packing) and solution (ligand field; solvation) effects on spin crossover. This work demonstrates that the length of the complex's alkyl chain substituents on the complex can have a large impact on the transition temperature and profile of solid state spin crossover, offering a potential path to the fabrication of soft matter spin crossover materials.

Gold Nanowires from Nanorods

Gold nanowires (AuNWs) possess strong potential application in micro- and nanoelectronics as well as in plasmonic waveguides because of their low electrical resistance. However, the synthesis of pure solvent-dispersible AuNWs with full control over their length still remains a challenge. All the previously reported methods produce AuNWs with other impurities such as smaller nanorods, platelets, and spherical particles and are limited to a certain length (typically below 10 μm). This article describes a one-step synthesis of extremely long AuNWs (up to 25 μm) with great control over their dimensions by using pentahedrally twinned gold nanorods (AuNRs) as seed particles. To induce the AuNW growth, the reduction of Au(I) to Au(0) was carried out on the surface of AuNRs at a very low pH by introducing HCl into the growth solution. The slow conversion of Au(I) to Au(0) due to the increase in reduction potential at lower pH promoted the preferential deposition of metallic gold on the more reactive tips of AuNRs compared to their sides, resulting in the formation of AuNWs. In analogy to the "living" polymerization reaction, the length of the AuNWs was proportional to the amount of Au(I) added to the growth solution; thus, the desired length of AuNWs was achieved by controlling the supply of Au(I) ions in the reaction mixture. The AuNWs longer than 6 μm were found to be responsive to microwave radiation. When an aqueous solution of AuNWs was exposed to microwaves, the formation of sharp kinks was observed in several locations of AuNWs without their disintegration into smaller pieces.

One-Pot Self-Templated Growth of Gold Nanoframes for Enhanced Surface-Enhanced Raman Scattering Performance

As one of the representative metallic hollow nanostructures, Au nanoframes have shown fascinating properties such as strong localized surface plasmon resonance associated with emerging applications such as surface-enhanced Raman scattering (SERS) sensors. In this study, for the first time, a facile one-pot synthetic approach for hollow Au nanoframes is demonstrated by directly etching Au nanoplates, that is, the so-called self-templates. A novel growth mechanism has been revealed that involves a synergistic function of Ag and Br ions. The presence of Ag⁺ leads to the observation of self-limiting Au film thickness, whereas Au{111} facets are preferentially attacked by the presence of Br^- in the reaction ambient. More importantly, graphene is introduced to prevent/minimize aggregation during the formation of Au nanoframes. The combined simulation and experimental studies show that the hybrid platform made of graphene/Au nanoframes is capable of detecting analytes at concentration levels down to 10^-9 M by using the SERS technique.

Effect of the Crystallization Process of Surfactant Bilayer Lamellar Structures on the Elongation of High-Aspect-Ratio Gold Nanorods

The growth mechanism of an "in-gel synthesis method", that is, the effects of composition and structure of the lamellar gel phase below the Krafft temperature of surfactant solutions on the growth of long gold nanorods, was investigated. We changed the alkyl chain length of surfactant molecules to investigate the effect of surfactant self-assembly on the elongation of gold nanorods systematically; eight mixed solutions of alkyltrimethylammonium bromide (C nTAB; n = 2-16; n = even) with C18TAB were used for investigation. The Krafft temperature, self-assembly of surfactant molecules, and the crystallization process of each mixture were observed by differential scanning calorimetry, wide-angle X-ray scattering, visual inspection, and small-angle X-ray scattering. Gold nanorods were synthesized in these eight surfactant mixtures. These observations demonstrated that when the surfactant L_β phase sustains for a long time, the space of the water layer is also kept large enough for the seeds to take up Au ions bound to surfactant micelles. In this case, the seeds can form long nanorods between bilayers. We conclude that not only the stability of the lamellar gel phase but also co-existence of Au-ion carriers, that is, surfactant micelles, is essential for the elongation of long gold nanorods.

Sequential Ligand Exchange of Coordination Polymers Hybridized with In Situ Grown and Aligned Au Nanowires for Rapid and Selective Gas Sensing

Combining polymeric materials and conductive one-dimensional metal nanostructures is able to achieve enhanced chemical and electrical properties, but the control over their morphology and spatial arrangement remains a big challenge. Herein, by replacing benzenedicarboxylate (BDC) in ZnBDC nanoplates with oleylamine (OAM) in the presence of HAuCl₄, Zn-OAM nanobelts with a highly ordered laminar structure were obtained, on which ultrathin Au nanowires (Au NWs) were deposited and aligned along the long axes of the nanobelts. The resulting Zn-OAM/Au NW hybrid further underwent an OAM-to-2-methylimidazole ligand exchange, resulting in the formation of porous nanobelts composed of ZIF-8 nanocrystals interwound with aligned Au NWs. Due to the synergistic effect between the polymeric and metallic structures, the Zn-OAM/Au NW hybrid nanobelts and ZIF-8/Au NW porous nanobelts demonstrated fast and selective gas sensing at ambient conditions, in sharp contrast to the nonresponsive Au NWs or Zn-based polymers alone.

Chemical Transformation of Nanorods to Nanowires: Reversible Growth and Dissolution of Anisotropic Gold Nanostructures

This manuscript describes a reversible wet chemical process for the tip-selective one-dimensional (1D) growth and dissolution of gold nanorods (AuNRs) and gold nanowires (AuNWs). Tip-selective dissolution was achieved by oxidation of AuNRs with a Au(III)/CTAB complex, whereas the growth of AuNRs was carried out by the reduction of Au(I) ions on the AuNR surface with a mild reducing agent, ascorbic acid (AA). Both the dissolution and growth processes are highly tip selective and proceed exclusively in one dimension. A decrease in the aspect ratio (AR) of AuNRs during the dissolution resulted in a blue shift in the longitudinal plasmon band (LPB) position, and red shifts in the LPB position were achieved by increasing the AR by 1D growth of AuNRs. Both growth and dissolution processes are fully controllable and can be stopped and resumed at any given time when the desired AR and/or LPB position is achieved. In addition, the tip-selective 1D growth of AuNRs can be continued with the additional supply of Au(I)/CTAB/AA solution to produce extremely long AuNWs.