Amino acid-mediated amorphous copper sulphide with enhanced photothermal conversion efficiency for antibacterial application

Pathogenic bacteria in daily life, such as Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), often seriously affect human life and health. The extensive use of antibiotics has led to the emergence of drug-resistant bacteria, so it is urgent to develop efficient and non-drug-resistant sterilization methods. Here, we use small-molecule cysteine (Cys) as an auxiliary agent to synthesize spherical porous amorphous CuS-Cysteine (CuS-C) nanoparticles, which have good dispersion in aqueous solutions, and explore the reaction mechanism of Cys-induced CuS synthesis. The synthesized composite nanomaterials have strong near-infrared light absorption ability and efficient photothermal conversion ability and can effectively ablate pathogenic bacteria under the irradiation of an 808 nm laser. In addition, antibacterial experiments showed that CuS-C composites had no bactericidal effect without near-infrared light, but they had a good photothermal bactericidal effect on S. aureus and E. coli under radiation conditions. Considering the simple synthesis process, strong photothermal conversion ability, low cost, and suitability for large-scale production, CuS-C nanocomposites, as a promising antibacterial material, will provide a feasible scheme for the treatment of drug-resistant pathogens.

Covalent RGD-graphene-phthalocyanine nanocomposite for fluorescence imaging-guided dual active/passive tumor-targeted combinatorial phototherapy

Poor tumor selectivity, low stability and quenched fluorescence are the main challenges to be overcome for nanomedicine, and are mainly caused by the dissociation of the nanostructure and aggregation of chromophores in the biological environment. Herein, covalently connected nanoparticles RGD-graphene-phthalocyanine (RGD-GO-SiPc) were constructed based on RGD peptide, silicon phthalocyanine (SiPc) and graphene oxide (GO) via a conjugation reaction for fluorescence imaging-guided cancer-targeted combinatorial phototherapy. The prepared RGD-GO-SiPc exhibited supreme biological stability, high-contrast fluorescence imaging, significantly enhanced NIR absorption, high photothermal conversion efficiency (25.6%), greatly improved cancer-targeting capability, and synergistic photodynamic (PDT) and photothermal therapy (PTT) efficacy along with low toxicity. Both in vitro and in vivo biological studies showed that RGD-GO-SiPc is a kind of promising multifunctional nanomedicine for fluorescence imaging-guided combined photothermal and photodynamic therapy with dual active/passive tumor-targeting properties.

Surface engineering of copper sulfide-titania-graphitic carbon nitride ternary nanohybrid as an efficient visible-light photocatalyst for pollutant photodegradation

Advanced photocatalyst is a key for photocatalytic water purification in the environmental pollutant remediation. In this study, graphitic carbon nitride (g-CN) modified by CuS and TiO₂ ternary nanohybrid (CuS-TiO₂-g-CN) with close interfacial contact among CuS, TiO₂ and g-CN was fabricated through a facile and green method. Compared to the binary g-CN-based counterparts, the CuS-TiO₂-g-CN possesses multiple photo-generated charge transfers owing to the synergistic action of CuS, TiO₂ and g-CN. And hence the separation efficiency of photo-generated electron-hole pairs can be improved for the CuS-TiO₂-g-CN. The optical and photoelectrochemical measurements prove that the CuS-TiO₂-g-CN has narrower band gap energy and higher transient photocurrent density than those of g-CN and TiO₂-g-CN. Therefore, the CuS-TiO₂-g-CN shows notably higher photocatalytic activity and stability towards the degradation of Rhodamine B (RhB) than g-CN and TiO₂-g-CN under visible-light irradiation. Moreover, a possible visible-light photocatalytic mechanism of CuS-TiO₂-g-CN for degrading RhB was also proposed on the basis of the experimental results and literature reports.

Catalytic and photoresponsive BiZ/CuxS heterojunctions with surface vacancies for the treatment of multidrug-resistant clinical biofilm-associated infections

We report a one-pot facile synthesis of highly photoresponsive bovine serum albumin (BSA) templated bismuth-copper sulfide nanocomposites (BSA-BiZ/Cu_xS NCs, where BiZ represents in situ formed Bi₂S₃ and bismuth oxysulfides (BOS)). As-formed surface vacancies and BiZ/Cu_xS heterojunctions impart superior catalytic, photodynamic and photothermal properties. Upon near-infrared (NIR) irradiation, the BSA-BiZ/Cu_xS NCs exhibit broad-spectrum antibacterial activity, not only against standard multidrug-resistant (MDR) bacterial strains but also against clinically isolated MDR bacteria and their associated biofilms. The minimum inhibitory concentration of BSA-BiZ/Cu_xS NCs is 14-fold lower than that of BSA-Cu_xS NCs because their multiple heterojunctions and vacancies facilitated an amplified phototherapeutic response. As-prepared BSA-BiZ/Cu_xS NCs exhibited substantial biofilm inhibition (90%) and eradication (>75%) efficiency under NIR irradiation. Furthermore, MRSA-infected diabetic mice were immensely treated with BSA-BiZ/Cu_xS NCs coupled with NIR irradiation by destroying the mature biofilm on the wound site, which accelerated the wound healing process via collagen synthesis and epithelialization. We demonstrate that BSA-BiZ/Cu_xS NCs with superior antimicrobial activity and high biocompatibility hold great potential as an effective photosensitive agent for the treatment of biofilm-associated infections.

Copper Sulfide Nanoassemblies for Catalytic and Photoresponsive Eradication of Bacteria from Infected Wounds

Bovine serum albumin (BSA)-encapsulated copper sulfide nanocrystals (CuS NCs) were prepared by heating an alkaline solution containing copper ions and BSA without an additional sulfur source. At a high BSA concentration (0.8 mM), nanoassembly of the as-formed CuS NCs occurs to form BSA-CuS NCs as a result of the formation of BSA gel-like structures. In addition to their intrinsic photothermal properties, the BSA-CuS NCs possess rich surface vacancies and thus exhibit enzyme-like and photodynamic activities. Spontaneous generation of hydrogen peroxide (H₂O₂) led to the in situ formation of copper peroxide (CPO) nanodots on the BSA-CuS NCs to catalyze singlet oxygen radical generation. The antimicrobial response was enhanced by >60-fold upon NIR laser irradiation, which was ascribed to the combined effect of the photodynamic and photothermal inactivation of bacteria. Furthermore, BSA-CuS NCs were transdermally administered onto a methicillin-resistant Staphylococcus aureus-infected wound and eradicated >99% of bacteria in just 1 min under NIR illumination due to the additional peroxidase-like activity of BSA-CuS NCs, transforming H₂O₂ at the infection site into hydroxyl radicals and thus increasing the synergistic effect from photodynamic and photothermal treatment. The BSA-CuS NCs exhibited insignificant in vitro cytotoxicity and hemolysis and thus can serve as highly biocompatible bactericides in preclinical applications to effectively eradicate bacteria.

Light trapping structures and plasmons synergistically enhance the photovoltaic performance of full-spectrum solar cells

A full-spectrum solar cell exhibits potential as an effective strategy to enhance the absorption of incident solar light. To ensure the absorption capability of solar cells, trapping structures or plasmons have emerged as two main ways of utilizing the full spectrum of solar energy. First, recent progress in the full-spectrum solar cells based on NCs was reviewed from the aspects of trapping structures and plasmon design. Moreover, the effects of light trapping and surface plasmon resonance on light absorption and photoelectronic conversion were emphasized and discussed. Finally, the application prospect of their combination in the field of full-spectrum solar cells was examined. It was pointed out that the deep exploration of the physical mechanism of photoelectric conversion, controllable preparation of the interface and stability of composite structures will become the main directions of future research.

Facile synthesis of CuS/MXene nanocomposites for efficient photocatalytic hydrogen generation

Deposition of covellite CuS nanocrystals on the multilayered MXene and few-layered MXene by a facile reaction of S²⁻ with Cu²⁺ precursors to obtain 0D/2D nanocomposites.

Biomimetic strategies to produce catalytically reactive CuS nanodisks

Copper sulfide materials have diverse applications from cancer therapy to environmental remediation due to their narrow bandgap and easily tuned plasmon. The synthesis of these materials often involves toxic reagents and harsh conditions where biomimetic methods may provide opportunities to produce these structures under sustainable conditions. To explore this capability, simple amino acids were exploited as biological ligands for the ambient synthesis of CuS materials. Using an aqueous-based approach, CuS nanodisks were prepared using acid-containing amino acid molecules that stabilize the materials against bulk aggregation. These structures were fully characterized by UV-vis analysis, transmission electron microscopy, dynamic light scattering, atomic force microscopy, selected area electron diffraction, and X-ray diffraction, which confirmed the formation of CuS. The materials possessed a vibrant plasmon band in the near IR region and demonstrated enhanced photocatalytic reactivity for the advanced oxidation of organic dyes in water. These results demonstrate a room temperature synthetic route to optically important materials, which could have important application in catalysis, optics, nanomedicine, etc.

Anisotropic Plasmonic CuS Nanocrystals as a Natural Electronic Material with Hyperbolic Optical Dispersion

Copper sulfide nanocrystals have recently been studied due to their metal-like behavior and strong plasmonic response, which make them an attractive material for nanophotonic applications in the near-infrared spectral range; however, the nature of the plasmonic response remains unclear. We have performed a combined experimental and theoretical study of the optical properties of copper sulfide colloidal nanocrystals and show that bulk CuS resembles a heavily doped p-type semiconductor with a very anisotropic energy band structure. As a consequence, CuS nanoparticles possess key properties of relevance to nanophotonics applications: they exhibit anisotropic plasmonic behavior in the infrared and support optical modes with hyperbolic dispersion in the 670-1050 nm spectral range. We also predict that the ohmic loss is low compared to conventional plasmonic materials such as noble metals in the NIR. The plasmonic resonances can be tuned by controlling the size and shape of the nanocrystals, providing a playground for future nanophotonic applications in the near-infrared.

Doping of aluminum (Al) into copper sulfide (CuS) nanocrystals enhanced their solar spectral selectivity

Al-CuS/PVA film possessed low NIR transmittance and high visible light transmittance. CuS nanocrystals doping Al significantly enhance their solar spectral selectivity.

Inter-diffusion of Cu2+ ions into CuS nanocrystals confines the microwave absorption properties

The inter-diffusion of Cu²⁺ cations into CuS nanocrystals generates CuS@Cu_2−xS core–shell and Cu₂S NCs in the presence of ascorbic acid (AA) at varying precursor Cu²⁺ : Cu⁺ molar ratios. The inter-diffusion process has a confining effect on the microwave absorption properties.