Green recovery of solid electrolytes from all-solid-state lithium-ion batteries using low-melting mixture solvents with tunable physical properties

All-solid-state lithium-ion batteries (ASSLIBs) are anticipated to be the next generation of high-performance lithium batteries due to their enhanced safety and high energy density. However, the promising widespread application of ASSLIBs will lead to a significant increase in spent batteries, resulting in environmental pollution and resource depletion. Therefore, the development of environmentally friendly recycling methods for ASSLIBs is both urgent and critical. Low-melting mixture solvents (LoMMSs) were proposed by Professor Yu's research group at Tsinghua University in 2023 to facilitate the advancement of green solvents and green chemistry. Here, we utilize LoMMSs to leach metals from solid-state electrolytes (SSEs) of ASSLIBs and apply anti-solvents method to recover metal ions from leachate. Results show that the leaching efficiency of Li is up to 92.5% at a mild temperature of 80 °C within 24 h. The high Li leaching efficiency is ascribed to the coordination interaction. Furthermore, the Li leaching efficiency in large-scale applications shows minimal deviation from the optimal efficiency. This research provides valuable insights into the development of efficient, green, and mild recycling methods for SSEs in ASSLIBs.

Harnessing the Potential of 5-Hydroxymethylfurfural: Investigating Solubility and Stability in Tailored Deep Eutectic Solvents

The potential of 5-hydroxymethylfurfural (HMF) as a platform chemical for sustainable biobased products is widely recognized. However, its practical applications are often constrained by stability challenges. This study examines the solubility and chemical stability of HMF in 15 paradigmatic deep eutectic solvents (DES), formed by combining five hydrogen bond acceptors (HBAs: betaine, choline chloride, choline acetate, L-carnitine, and l-proline) and three hydrogen bond donors (HBDs: glycerol, ethylene glycol, and levulinic acid). Our findings reveal that HMF demonstrates high solubility and remarkable stability across the studied DES. Only a few cases of HMF degradation were observed and discussed, with specific degradation pathways identified in certain solvent mixtures. Notably, the HBAs within the DES play a crucial role in significantly enhancing the stability of HMF, establishing a foundation for its use as a renewable synthon in organic chemistry using environmentally benign solvents. These findings represent a significant step forward in aligning the synthetic design with the principles of green chemistry.

Natural Low-Melting Mixture Solvents for Green Recovery of Spent All-Solid-State Sodium-Ion Batteries with Superior Efficiency over Lithium-Ion Batteries

Spent all-solid-state sodium-ion batteries (ASIBs) containing toxic and precious metal would be produced significantly and lead to resource waste and environmental pollution as the wide application of ASIBs in the near future. Therefore, it is necessary to develop green strategy for recovery of ASIBs. Here, we propose a safe, mild and green strategy to recover toxic and precious metals from cathode/solid electrolyte of ASIBs by using natural low-melting mixture solvents (LoMMSs) with high selectivity and high leaching efficiency. Natural LoMMSs are abundant, natural available, cheap, non-flammable, biodegradable and biocompatible. Results show that natural LoMMSs could leach nearly 100 % Na and achieve superhigh Na/Zr selectivity of up to 58 from ASIBs at mild temperature, outperforming the recycling efficiency and selectivity of lithium-ion batteries cathode. More importantly, we find that water could be used as a green and low-cost anti-solvent to precipitate the extracted metal from the leachate with low-energy consumption at room temperature. This work provides a cost-effective, energy-saving, mild, green strategy for the recovery of cathode/solid electrolyte from spent ASIBs with high safety and high selectivity.

Optimization of Deep Eutectic Solvent-Based Ultrasound-Assisted Extraction of Bioactive Compounds from Maca Leaves Using the Taguchi Method

This study was conducted to identify the optimal conditions and evaluate the feasibility of deep eutectic solvent (DES)-based ultrasound-assisted extraction (UAE) for utilizing maca (Lepidium meyenii) leaves, an agricultural by-product, as functional materials. The extraction parameters influencing the recovery of saponins and polyphenols, which are major bioactive compounds, were analyzed using the Taguchi method. Results: Signal-to-noise ratios and analysis of variance indicated that the liquid-solid ratio was the most critical factor for optimizing the extraction process. The optimal extraction conditions were determined to be a liquid-solid ratio of 40 mL/g, a water content in DES of 30%, an extraction time of 30 min, and an ultrasonic power of 300 W in the DES system consisting of choline chloride and glycerin in the molar ratio of 1:2. Maca leaf extract obtained under optimized DES-based UAE conditions exhibited higher bioactive compounds content and antioxidant activity compared with that obtained by hot water extraction. Therefore, the DES-based UAE method is a promising, eco-friendly alternative for extracting bioactive compounds from maca leaves.

Thermodynamic Water Activity Explains the Unusual Electrochemical Stability of Aqueous Deep Eutectic Solvents

The presence of water in nonaqueous deep eutectic solvent (DES) electrolytes has been debated in recent years, with efforts ranging from its complete removal to willful addition. It was shown that controlled amounts of water can be beneficial, as it not only enhances the physicochemical properties of these electrolytes but also has no significant detrimental effects on their electrochemical stability. Despite these advantages, there is still limited understanding of how water interacts with DES systems at the molecular level. This study examines the water activity in ethylene glycol and glycerol, as well as their binary mixtures with choline chloride to form the DESs ethaline and glyceline, respectively. In this work, we show that the high electrochemical stability of glyceline is related to its lower water activity compared to ethaline and can be attributed to the robust H-bonding network formed by the three hydroxyl groups of glycerol. Its 3D H-bond network effectively integrates water molecules within its solvent structure, reducing degradation and maintaining stability at higher water contents. The deviations from the ideal Raoult's law behavior are reflected in the water activity and activity coefficients, which highlight the intricate H-bond interactions within DES-water mixtures. Water acts like a lubricant within the more viscous DES mixtures without being detrimental to their electrochemical performance. The presented results emphasize the necessity of customizing DES-water compositions to enhance their performance as electrolytes, especially in flow battery applications where electrochemical stability, ionic conductivity, and fluidity are of utmost importance.

Waxy maize starch treatment with acidic deep eutectic solvents: Effect of molar ratio and carboxylic acids' structure

The effects of molar ratio and carboxylic acids' structure of deep eutectic solvents (DESs) on the treatment of waxy maize starch (WMS) were systematically investigated. FT-IR results of DESs discovered that shorter carbon chain acids exhibited stronger hydrogen bonds. Subsequently, DESs were utilized to treat WMS. Microscopy, DSC, and viscosity measurements indicated that the dissolution and gelatinization phase transitions of WMS occurred simultaneously in acid-DESs. Specifically, shorter carbon chains led to lower viscosity and more obvious dissolution. Notably, relatively high solubilities of 57.02 wt% (choline chloride/formic acid, CF) and 53.39 wt% (choline chloride/oxalic acid dihydrate, CO) were obtained for 6 h at 60 °C. Further characterization of regenerated WMS using SEM, XRD, FT-IR, and GPC showed that the granular and crystalline structures of WMS were disrupted, with a significant decrease in molecular weight. The extent of starch disruption/degradation increased as the acids' carbon chain decreased. Therefore, the treatment of WMS in acid-DESs was predominantly influenced by the length of the acids' carbon chain. Additionally, esterification reactions between WMS and carboxylic acids were detected in the CF and CO systems. These findings could provide a promising and efficient approach for starch treatment and structural analysis.

Effect of deep eutectic solvents on activity, stability, and selectivity of enzymes: Novel insights and further prospects

Deep eutectic solvents (DESs) have been extensively concerned since 2008 as reaction media in biocatalysis because of their excellent solvent performances. Here, we try to clarify the effects of DESs on the catalytic properties, structure, and conformation of enzymes. Through comprehensive analysis, it is found that the catalytic properties of enzymes can be designed in different DESs through modulating the hydrogen bond acceptors, hydrogen bond donors, and their molar ratio. Structural changes of different enzymes in various DESs are not always consistent, which may be attributed to the original structure of enzymes, DES composition, and the interactions between enzymes and DESs. Moreover, we try to elucidate how DESs interact with varying amounts of water, and furthermore how water in DES affects the catalytic properties of enzymes. The available researches indicate that proper amount of water can integrate into the network of DESs and strengthen the hydrogen-bonding interactions while excessive water will destroy the integrity of DESs. Water affects the performance of enzymes in two possible ways: 1) affecting enzyme affinity and structure directly; 2) influencing the properties of DESs, thus modulating the efficiency of enzymes. This review paves road for researchers to design DESs with desired properties for specific applications.

Breathable, Adhesive, and Biomimetic Skin-Like Super Tattoo

Electronic tattoo, capable of imperceivably acquiring bio-electrical signals from the body, is broadly applied in healthcare and human-machine interface. Tattoo substrate, the foundation of electronic tattoo, is expected to be mechanically mimetic to skin, adhesive, and breathable, and yet remains highly challenging to achieve. Herein, the study mimics human skin and design a breathable, adhesive, and mechanically skin-like super tattoo substrate based on an ultra-thin film (≈2 µm). Similar to skin, super tattoo demonstrates strain-adaptive stiffening properties with high tear energy (5.4 kJ·m-2) and toughness (1.3 MJ·m-3). Superior to skin, it exhibits high adhesion, ionic conductivity, and permeability. A variety of conductive electrodes can be processed on it, showing the universality toward an ideal platform for electronic tattoo with stable and low contact impedance. Super tattoo-based electrodes can imperceivably and accurately monitor weak electromyography (EMG) of swallowing on the junction, providing effective guidance for rehabilitation training of dysphagia.

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Towards a greater understanding of the deep eutectic phenomenon through examination of the lidocaine-NSAID therapeutic deep eutectic systems

Therapeutic deep eutectic solvents (THEDES) have been attracting increasing attention in the pharmaceutical literature as a promising enabling technology capable of improving physicochemical and biopharmaceutical properties for difficult-to-deliver drug compounds. The current literature has explored amide local anaesthetics and carboxylic acid nonsteroidal anti-inflammatories (NSAIDs) as commonly used THEDES formers for their active hydrogen-bonding functionality. However, little is known about what happens within the "deep eutectic" region where a range of binary compositions present simply as a liquid with no melting events detectable across experimentally achievable conditions. There is also very limited understanding of how parent compounds' physicochemical properties could impact upon the formation, interaction mechanism, and stability of the formed liquid systems, despite the significance of these information in dose adjustment, industrial handling, and scaling-up of these liquids. In the current work, we probed the "deep eutectic" phenomenon by investigating the formation and physicochemical behaviours of some chosen lidocaine-NSAID systems across a wide range of composition ratios. Our data revealed that successfully formed THEDES exhibited composition dependent Tg variations with strong positive deviations from predicted Tg values using the Gordon-Taylor theory, suggesting substantial interactions within the formed supramolecular structure. Interestingly, it was found that the parent compound's glass forming ability had a noticeable impact upon such profound interaction and hence could dictate the success of THEDES formation. It has also been confirmed that all successful systems were formed based on charge-assisted hydrogen bonding within their THEDES network, affirming the significant role of partial protonisation on achieving a profound melting point depression. More importantly, the work found that within the "deep eutectic" region there was still an ideal, or thermodynamically preferrable "THEDES point", which would exhibit excellent stability upon exposure to stress storage conditions. The discoveries of this study bring the literature one step closer to fully understanding the "therapeutic deep eutectic" phenomenon. Through correlation between parent reagents' physicochemical properties and the synthesised products' characteristics, we establish a more educated process for the prediction and engineering of THEDES.

Choline chloride-based deep eutectic solvents as plasticizer and active agent in chitosan films

The growing concern over extending the shelf life of food products, coupled with the escalating environmental impact of synthetic plastic waste, has fuelled a quest for bio-based alternatives in packaging research. In response to this pressing need, our study delves into the synthesis of chitosan-based films incorporating a deep eutectic solvents (DES). Choline chloride and diverse hydrogen bond donors were used as plasticizers, we also explored the active properties of DES integrated into the chitosan (Ch) matrix. The Ch-based films with chlorine chloride: citric acid can prevent the mold spotting up to 29 days longer in comparison to bread wrapped in polyethylene films (PE). The obtained Ch/DES films exhibited mechanical properties comparable to conventional PE (e.g., up to tensile strength of 26 MPa and up to 210% in case of elongation at break). This synthesis approach represents a significant stride towards environmentally friendly packaging materials, aligning with the principles of green chemistry.

Deep eutectic solvents (DESs) films based on gelatin as active packaging for moisture regulation in fruit preservation

To develop a novel active packaging for fruit preservation, two different deep eutectic solvents (DESs) comprising choline chloride, betaine and glycerol [ChCl:Gly (1:2) and Be:Gly (1:2)] were prepared and the corresponding DESs-based films (DES@Gel) using gelatin as polymer matrix were fabricated. DES@Gel showed smoother morphologies and better optical and mechanical properties as compared with Gel. Moisture sorption isotherm curves, the enhancement of water vapour permeability (WVP) and the excellent moisture absorption-desorption cyclist performance illustrated the moisture regulation hypothesis mechanism of DES@Gel. Furthermore, cherry tomato preservation experiment was carried out and the groups treated with DES@Gel showed better performances. The moisture regulation property of DES@Gel could broaden new avenues for active packaging.

Spectroscopic and Computational Study of ZnCl2-Methanol Low-Melting-Temperature Mixtures

Alcoholic electrolyte mixtures have wide applications in industries. In this study, a series of mixtures composed of ZnCl2 and methanol (MeOH) with ZnCl2 mol % from 6.7 to 25 were prepared, and their spectral, structural, and thermodynamic properties were studied using infrared (IR) spectroscopy, differential scanning calorimetry (DSC), and density functional theory (DFT) calculations. The DFT-assisted analysis of excess spectra, supported by 2D-correlation spectroscopy, led to the identification of the major constituents of ZnCl2-MeOH mixtures, namely, MeOH monomer, MeOH dimer, and ZnCl2-3MeOH complex, produced after dissociation of MeOH trimer which represents the bulk methanol. The Hirshfeld charge analysis showed that in the competition between the O-H···Cl hydrogen bond (H-bond) and Zn ← O coordination bond to transfer charge in ZnCl2-MeOH complexes, the latter always dominates, making MeOH positively charged. The phase diagram of the binary system showed the presence of V-shaped glass transition temperatures (Tg), characteristic of low-melting mixture solvents (LoMMSs). The present study provides insights into the microscopic properties of the system and sheds light on the understanding of the general principles to prepare deep-eutectic solvents (DESs) or LoMMSs using inorganic salts and alcoholic compounds.

Aminoalkyl organosilicon with dual chemical sites for SO2 absorption and analysis of site-specific absorption entropy and enthalpy

Wet flue gas desulfurization is widely used for its high efficiency, however, the low absorption capacity, high viscosity and poor thermal stability of absorbents remains an open question. Herein, a low viscosity and high thermal stability SO2 absorbent with dual interacting sites was synthesized by introducing phenyl into organic silicon. The thermal stability of 1,5-bis (diethylamino)- 1,1,5,5-tetramethyl-3,3-diphenyltrisiloxane (BADPS) is comparable to ILs, while its viscosity is much lower than that of ILs. For the first time, we use a variant of the pseudo-first-order reaction rate equation obtained the reaction rate constant and the saturation absorption capacity. In addition, the optimal absorption and desorption temperatures were obtained based on an objective function. Mostly importantly, the absorption enthalpy change (ΔH) and entropy change (ΔS) of BADPS absorption reaction show the highest absolute values of SO2 absorbents reported so far. These results indicated that the prepared amine alkyl organosilicon could serve as a promising desulfurizing agent with low-energy consumption.

The Effect of Temperature and Shear on the Gelation of Cellulose Nanocrystals in Deep Eutectic Solvents

With the flourishing development of 3D printing technology, the demand for printing materials has been increasing rapidly in recent years. In particular, physical gels formed by cellulose nanocrystals (CNCs) exhibit suitable shear-thinning behavior, high storage moduli, and high yield stresses for extrusion-based printing. While most studies use water as the dispersing medium to form CNC percolated gels, the dispersing behavior of CNCs in alternative solvents, such as deep eutectic solvents (DESs), has not been fully explored. Especially, DESs have low volatility and good ionic conductivity to form functional ionogels. Precise control of the rheological properties and selection of suitable dispersion processes continue to pose significant challenges. In light of this, we have devised a novel dispersion process employing thermal and shear treatments to facilitate the gelation of CNCs within DESs. A crude dispersion of CNCs in the DES underwent thermal treatment to partially remove the surface sulfate ester on CNCs. As a result, the repulsive force between CNCs decreases. A second shear then significantly increases the strength of CNC/DES gels potentially because of the increased rod-rod contacts. This approach enables the formation of high-strength gels at low concentrations of CNCs. Both thermal treatment and a second shear are crucial to forming strong percolated CNC gels. In short, we showed a simple strategy to facilitate the dispersion and gelation of CNCs for direct ink writing.

Switchable adhesive films of pullulan loaded with a deep eutectic solvent-curcumin formulation for the photodynamic treatment of drug-resistant skin infections

Antimicrobial photodynamic therapy (aPDT) is a potent tool to surpass the global rise of antimicrobial resistance; still, the effective topical administration of photosensitizers remains a challenge. Biopolymer-based adhesive films can safely extend the residence time of photosensitizers. However, their wide application is narrowed by their limited water absorption capacity and gel strength. In this study, pullulan-based films with a switchable character (from a solid film to an adhesive hydrogel) were developed. This was accomplished by the incorporation of a betaine-based deep eutectic solvent (DES) containing curcumin (4.4 μg.cm-2) into the pullulan films, which tuned the films' skin moisture absorption ability, and therefore they switch into an adhesive hydrogel capable of delivering the photosensitizer. The obtained transparent films presented higher extensibility (elongation at break up to 338.2%) than the pullulan counterparts (6.08%), when stored at 54% of relative humidity, and the corresponding hydrogels a 4-fold higher adhesiveness than commercial hydrogels. These non-cytotoxic adhesives allowed the inactivation (∼5 log reduction), down to the detection limit of the method, of multiresistant strains of Staphylococcus aureus in ex vivo skin samples. Overall, these materials are promising for aPDT in the treatment of resistant skin infections, while being easily removed from the skin.

Unlocking the Potential of Deep Eutectic Solvents for C-H Activation and Cross-Coupling Reactions: A Review

Green chemistry principles have underpinned the development of deep eutectic solvents (DESs). In this brief overview, we discuss the potential of DESs as a greener alternative to volatile organic solvents for cross-coupling and C-H activation reactions in organic chemistry. DESs offer numerous benefits, such as easy preparation, low toxicity, high biodegradability, and the potential to replace volatile organic compounds. The ability of DESs to recover the catalyst-solvent system enhances their sustainability. This review highlights recent advances and challenges in utilizing DESs as a reaction media, as well as the impact of physicochemical properties on the reaction process. Several types of reactions are studied to highlight their effectiveness at promoting C-C bond formation. Aside from demonstrating the success of DESs in this context, this review also discusses the limitations and future prospects of DESs in organic chemistry.

Study on the biodegradation of polybutylene adipate-co-terephthalate/starch film containing deep eutectic solvent

Poly (butylene adipate-co-terephthalate) (PBAT) has attracted much attention as a biodegradable polymer, but its biodegradation speed is slow. Starch was blended with PBAT to develop daily packing film with high biodegradation speed, and deep eutectic solvent (DES) composed of choline chloride (CHCl)/glycerol (Gly) (molar ratio of 1:2) was used as a novel plasticizer. The hydrophilic starch is in favor of the breeding of microorganisms, at the same time DES can provide energy for the breeding. The degradation was traced in a simulated composting test using kitchen waste. After the PBAT/starch-DES film was buried in a mixture of food residue for 90 D, the relative weight molecular weight (M_w) of the PBAT decreased by about 50%. Furthermore, with the help of DES, the compatibility between PBAT and starch was improved, the PBAT/starch-DES film became more transparent than the PBAT and PBAT/starch film, and its tensile strength reached 7.9 MPa with an elongation at break of 335.6%. This work provided a simple and efficient solution to obtain rapidly degradable films.

The Role of Water Content of Deep Eutectic Solvent Ethaline in the Anodic Process of Gold Electrode

Traditional coupling of ligands for gold wet etching makes large-scale applications problematic. Deep eutectic solvents (DESs) are a new class of environment-friendly solvents, which could possibly overcome the shortcomings. In this work, the effect of water content on the Au anodic process in DES ethaline was investigated by combining linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). Meanwhile, we employed atomic force microscopy (AFM) to image the evolution of the surface morphology of the Au electrode during its dissolution and passivation process. The obtained AFM data help to explain the observations about the effect of water content on the Au anodic process from the microscopic perspective. High water contents make the occurrence of anodic dissolution of gold at higher potential, but enhances the rate of the electron transfer and gold dissolution. AFM results reveal the occurrence of massive exfoliation, which confirms that the gold dissolution reaction is more violent in ethaline with higher water contents. In addition, AFM results illustrate that the passive film and its average roughness could be tailored by changing the water content of ethaline.

Unravelling High-Load Superlubricity of Ionic Liquid Analogues by In Situ Raman: Incomplete Hydration Induced by Competitive Exchange of External Water with Crystalline Water

A high load-carrying capacity is the key to the practicality of liquid superlubricity, but it is difficult to achieve high load and low friction simultaneously by relying solely on a liquid film. Herein, a choline chloride-based ionic liquid analogue (ILA) macroscale superlubricant is first reported by tuning down strong hydrogen bonding in the ILA via introducing 2-10 wt % water, with a high load of 160 MPa and a low coefficient of friction of 0.006-0.008. In situ Raman reveals that competitive exchange between external water and crystalline water induces weak H-bond-dominated incomplete hydration, conferring a low-shear interface and considerable load-carrying capacity inside the lubricant. It is a hydrodynamic lubrication film rather than a tribochemical/physical adsorption film, allowing it to be applied to friction pairs of various materials. This study unveils the principle of water mediation of high-viscosity ILAs and also provides new insights into the design of practical ILA-based superlubrication materials with high load-carrying capacity.

Hydration in Deep Eutectic Solvents Induces Non-monotonic Changes in the Conformation and Stability of Proteins

The preservation of labile biomolecules presents a major challenge in chemistry, and deep eutectic solvents (DESs) have emerged as suitable environments for this purpose. However, how the hydration of DESs impacts the behavior of proteins is often neglected. Here, we demonstrate that the amino acid environment and secondary structure of two proteins (bovine serum albumin and lysozyme) and an antibody (immunoglobulin G) in 1:2 choline chloride:glycerol and 1:2 choline chloride:urea follow a re-entrant behavior with solvent hydration. A dome-shaped transition is observed with a folded or partially folded structure at very low (<10 wt % H2O) and high (>40 wt % H2O) DES hydration, while protein unfolding increases between those regimes. Hydration also affects protein conformation and stability, as demonstrated for bovine serum albumin in hydrated 1:2 choline chloride:glycerol. In the neat DES, bovine serum albumin remains partially folded and unexpectedly undergoes unfolding and oligomerization at low water content. At intermediate hydration, the protein begins to refold and gradually retrieves the native monomer-dimer equilibrium. However, ca. 36 wt % H2O is required to recover the native folding fully. The half-denaturation temperature of the protein increases with decreasing hydration, but even the dilute DESs significantly enhance the thermal stability of bovine serum albumin. Also, protein unfolding can be reversed by rehydrating the sample to the high hydration regime, also recovering protein function. This correlation provides a new perspective to understanding protein behavior in hydrated DESs, where quantifying the DES hydration becomes imperative to identifying the folding and stability of proteins.

Controversy on the toxic nature of deep eutectic solvents and their potential contribution to environmental pollution

Deep eutectic solvents (DES) are promising reaction media where interesting catalytic processes can be carried out. In theory, most of these mixtures are environmentally friendly, being an alternative to traditionally pollutant organic solvents used in several processes related to organic chemistry and biotechnology. However, recent studies show contradictory results regarding their toxicity. The method selected to perform toxicity studies could be significantly conditioned by some of the physical properties displayed by the DESs. Also, the metabolic capabilities of the organisms/cells used to monitor their toxicity are influenced by their physical properties. In this review, relevant physical-chemical properties for toxicity studies are summarized. The advantages/disadvantages of the used tests to monitor their toxicity and biodegradability in connection with the chosen organisms/cells are discussed, shedding light on their limitations. These findings could be taken as a starting point for designing more accurate DESs toxicity studies covering a wider spectrum of organisms and cells to be used as biomodels to monitor environmental pollution caused by DESs.

Deep Eutectic Solvent-Mediated Electrocatalysts for Water Splitting

As green, safe, and cheap solvents, deep eutectic solvents (DESs) provide tremendous opportunities to open up attractive perspectives for electrocatalysis. In this review, the achievement of DESs in the preparation of catalysts for electrolytic water splitting is described in detail according to their roles combined with our own work. DESs are generally employed as green media, templates, and electrolytes. A large number of hydrogen bonds in DESs result in supramolecular structures which have the ability to shape the morphologies of nanomaterials and then tune their performance. DESs can also serve as reactive reagents of metal electrocatalysts through directly participating in synthesis. Compared with conventional heteroatom sources, they have the advantages of high safety and designability. The "all-in-one" transformation strategy is expected to realize 100% atomic transformation of reactants. The aim of this review is to offer readers a deeper understanding on preparing DES-mediated electrocatalysts with higher performance for water splitting.

Formulation Strategies to Improve the Stability and Handling of Oral Solid Dosage Forms of Highly Hygroscopic Pharmaceuticals and Nutraceuticals

Highly hygroscopic pharmaceutical and nutraceutical solids are prone to significant changes in their physicochemical properties due to chemical degradation and/or solid-state transition, resulting in adverse effects on their therapeutic performances and shelf life. Moisture absorption also leads to excessive wetting of the solids, causing their difficult handling during manufacturing. In this review, four formulation strategies that have been employed to tackle hygroscopicity issues in oral solid dosage forms of pharmaceuticals/nutraceuticals were discussed. The four strategies are (1) film coating, (2) encapsulation by spray drying or coacervation, (3) co-processing with excipients, and (4) crystal engineering by co-crystallization. Film coating and encapsulation work by acting as barriers between the hygroscopic active ingredients in the core and the environment, whereas co-processing with excipients works mainly by adding excipients that deflect moisture away from the active ingredients. Co-crystallization works by altering the crystal packing arrangements by introducing stabilizing co-formers. For hygroscopic pharmaceuticals, coating and co-crystallization are the most commonly employed strategies, whereas coating and encapsulation are popular for hygroscopic nutraceuticals (e.g., medicinal herbs, protein hydrolysates). Encapsulation is rarely applied on hygroscopic pharmaceuticals, just as co-crystallization is rarely used for hygroscopic nutraceuticals. Therefore, there is potential for improved hygroscopicity reduction by exploring beyond the traditionally used strategy.

An Overview of Structure and Dynamics Associated with Hydrophobic Deep Eutectic Solvents and Their Applications in Extraction Processes

Recent development of novel water-immiscible green solvents known as hydrophobic deep eutectic solvents (HDESs) has opened the gates for applications requiring media where presence of water is undesirable. Ever since they were prepared, researchers have used HDESs in diverse fields such as extraction processes, CO 2 sequestration, membrane formation, and catalysis. The microstructure and dynamics associated with the species comprising HDESs guide their suitability for specific applications. For example, varying the alkyl tail length of HDES components significantly affects the dynamics of the components and thus helps in tuning the efficiency of extraction processes. The development of HDESs is still in infancy and very few theoretical studies are available in the literature that help in understanding the structure and dynamics of HDESs. This review highlights the recent work focused on the microscopic structure and dynamics of HDESs and their potential applications, particularly in extraction processes. We have also provided a glimpse of how the integration of experiments and computational techniques can help understand the mechanism of extraction processes.

Effect of Water on a Hydrophobic Deep Eutectic Solvent

Deep eutectic solvents (DESs) formed by hydrogen bond donors and acceptors are a promising new class of solvents. Both hydrophilic and hydrophobic binary DESs readily absorb water, making them ternary mixtures, and a small water content is always inevitable under ambient conditions. We present a thorough study of a typical hydrophobic DES formed by a 1:2 mole ratio of tetrabutyl ammonium chloride and decanoic acid, focusing on the effects of a low water content caused by absorbed water vapor, using multinuclear NMR techniques, molecular modeling, and several other physicochemical techniques. Already very low water contents cause dynamic nanoscale phase segregation, reduce solvent viscosity and fragility, increase self-diffusion coefficients and conductivity, and enhance local dynamics. Water interferes with the hydrogen-bonding network between the chloride ions and carboxylic acid groups by solvating them, which enhances carboxylic acid self-correlation and ion pair formation between tetrabutyl ammonium and chloride. Simulations show that the component molar ratio can be varied, with an effect on the internal structure. The water-induced changes in the physical properties are beneficial for most prospective applications but water creates an acidic aqueous nanophase with a high halide ion concentration, which may have chemically adverse effects.

Chemical Dissolution of Chalcopyrite Concentrate in Choline Chloride Ethylene Glycol Deep Eutectic Solvent

Currently, the high demand for copper is in direct contrast with the decrease in the mineral grade and, more significantly, the concerns regarding the environmental impact that arise as a result of processing such low-grade materials. Consequently, new mineral processing concepts are needed. This work explores the chemical dissolution of chalcopyrite concentrate at ambient pressure and moderate temperatures in a deep eutectic solvent. Copper and iron are dissolved without changing their oxidation state, without solvent pH change, and stabilized as a chloride complex with no evidence of passivation. Chemical equilibria of the metallic chloride complexes limit the dissolution, and the step that is rate-controlling of the kinetics is the interdiffusion of species in the solvent. The chemical mechanism may involve initial chloride adsorption at positive sites of the solid surface, pointing out the importance of surfaces states on chalcopyrite particles. A model based on a shrinking particle coupled with pseudo-second-order increase in the liquid concentration of copper describes the dissolution kinetics and demonstrates the importance of the liquid to solid ratio. Iron and copper can be recovered separately from the solvent, which highlights that this concept is an interesting alternative to both redox-hydrometallurgy and pyrometallurgy to obtain copper by the processing of chalcopyrite concentrate.

Hygroscopicity of 1:2 Choline Chloride:Ethylene Glycol Deep Eutectic Solvent: A Hindrance to its Electroplating Industry Adoption

Deep eutectic solvents have been established as feasible metal electroplating solvent alternatives over traditional toxic aqueous plating baths. However, water, either added intentionally or unintentionally, can significantly influence the solvent’s physical properties and performance, thereby hindering its industry application. In this study, the hygroscopicity, or the ability to absorb moisture from the environment, of synthesized ethaline (1:2 choline chloride:ethylene glycol) was investigated. The kinematic viscosity, electrical conductivity, electrochemical window, and water content of ethaline were monitored over a 2-week period. Karl Fischer titration tests showed that ethaline exposed to the atmosphere displayed significant hygroscopicity compared to its unexposed counterpart. 1H NMR spectroscopy revealed that water vapor was readily absorbed at the surface due to the hydrophilic groups present in the ethaline molecule. Water uptake resulted in the decrease in viscosity, increase in electrical conductivity and narrowing of the electrochemical window of ethaline. Solution heating at 100°C removed the absorbed moisture and allowed the recovery of the solvent’s initial properties.

Multiple evidences of dynamic heterogeneity in hydrophobic deep eutectic solvents

Hydrophobic deep eutectic solvents (HDESs) have gained immense popularity because of their promising applications in extraction processes. Herein, we employ atomistic molecular dynamics simulations to unveil the dynamics of DL-menthol (DLM) based HDESs with hexanoic (C6), octanoic (C8), and decanoic (C10) acids as hydrogen bond donors. The particular focus is on understanding the nature of dynamics with changing acid tail length. For all three HDESs, two modes of hydrogen bond relaxations are observed. We observe longer hydrogen bond lifetimes of the inter-molecular hydrogen bonding interactions between the carbonyl oxygen of the acid and hydroxyl oxygen of menthol with hydroxyl hydrogen of both acids and menthol. We infer strong hydrogen bonding between them compared to that between hydroxyl oxygen of acids and hydroxyl hydrogens of menthol and acids, marked by a faster decay rate and shorter hydrogen bond lifetime. The translational dynamics of the species in the HDES becomes slower with increasing tail length of the organic acid. Slightly enhanced caging is also observed for the HDES with a longer tail length of the acids. The evidence of dynamic heterogeneity in the displacements of the component molecules is observed in all the HDESs. From the values of the α-relaxation time scale, we observe that the molecular displacements become random in a shorter time scale for DLM-C6. The analysis of the self-van Hove function reveals that the overall distance covered by DLM and acid molecules in the respective HDES is more than what is expected from ideal diffusion. As marked by the shorter time scale associated with hole filling, the diffusion of the oxygen atom of menthol and the carbonyl oxygen of acid from one site to the other is fastest for hexanoic acid containing HDES.

Recent advances in green solvents for lignocellulosic biomass pretreatment: Potential of choline chloride (ChCl) based solvents

Biomass wastes exhibit a great potential to be used as a source of non-depleting renewable energy and synthesis of value-added products. The key to the valorization of excess lignocellulosic biomass wastes in the world lies on the pretreatment process to recalcitrant barrier of the lignocellulosic material for the access to useful substrates. A wide range of pretreatment techniques are available and advances in this field is continuously happening, in search for cheap, effective, and environmentally friendly methods. This review starts with an introduction to conventional approaches and green solvents for pretreatment of lignocellulosic biomass. Subsequently, the mechanism of actions along with the advantages and disadvantages of pretreatment techniques were reviewed. The roles of choline chloride (ChCl) in green solvents and their potential applications were also comprehensively reviewed. The collection of ideas in this review serve as an insight for future works or interest on biomass-to-energy conversion using green solvents.

Current Progress in Natural Deep Eutectic Solvents for the Extraction of Active Components from Plants

In the last decade, natural deep eutectic solvents (NADESs) have gained more and more attention due to their green, convenient preparation, low toxicity and biodegradability. It is widely used in various fields, especially in the extraction of active components from plants, formed by the combination of hydrogen bond donors (HBDs) and hydrogen bond acceptors (HBAs) at a certain condition. In this article, six preparation methods of NADESs were summarized and the interactions that occur in the eutectic behavior of NADES including hydrogen bonding, electrostatic interaction and van der Waals force were also reviewed. What is more, its significant extraction capacity on flavonoids, phenols, alkaloids and plant pigments endows its extensive applications in the extraction of active components from medicinal plants. Extraction factors including solvents properties (viscosity, carbon chain length, number of hydroxyl groups), extraction condition (water content, extraction temperature, extraction time, solid-liquid ratio), extraction method and recycling method were discussed. In addition, NADESs can also be combined with other technologies, like molecular imprinting, monolithic column, to achieve efficient and specific extraction of active ingredients. Further systematic studies on the biodegradability and biotoxicity are put forward to be urgent.

Quantum chemical calculations on dissolution of dimethylformamide in ethaline

Deep-eutectic solvents (DESs) gained attention of researchers as green solvents. Making binary mixtures of DESs with appropriate cosolvents is a strategy to obtain more favorable mixtures. Here, structural features and hydrogen bonding (H-bonding) properties of binary mixtures containing ethaline (ETH) DES, (choline chloride (ChCl):2 ethylene glycol (EG)) with N,N-dimethylformamide (DMF) are reported. Such investigations are carried out by density functional theory (DFT) calculations. The results show that in ETH-DMF mixtures, DMF molecules can hardly overcome the strong Columbic interaction and doubly ionic H-bonds between the ions Ch⁺ and Cl^- or the ionic H-bonds between Ch⁺ and EG. Upon EG addition to ChCl to obtain ETH or DMF addition to ETH, the Cl^{- …} Ch⁺ connectivity decreases, implying charge delocalization from Cl^- to other components rather than Ch⁺. This is supported by the blue shift of Ch⁺ hydroxyl observed in the calculated infrared spectra.

Immobilization of Pseudomonas stutzeri lipase through Cross-linking Aggregates (CLEA) for reactions in Deep Eutectic Solvents

The use of deep eutectic solvents (DES) with buffer as cosolvent (up to 10 % v/v) leads to low-viscous media in which lipases can perform synthetic reactions, instead of hydrolysis. This paper explores the immobilization of Pseudomonas stutzeri lipase (TL) in cross-linking aggregates (CLEA) to deliver robust derivatives that are active in media like choline chloride - glycerol DES with buffer as cosolvent. While the free TL enzyme was markedly inactive in these media, TL-CLEA derivatives perform esterifications and can be reused several times. Overall, results are consistent with previous experiments reported for other lipases in these DES-water media and confirm that CLEA immobilization turns out a very useful and straightforward alternative for generating active (bio)catalysts for DES-aqueous media systems. Immobilized systems open the possibility of performing continuous processes in low-viscous DES-buffer media.

Promising Technological and Industrial Applications of Deep Eutectic Systems

Deep Eutectic Systems (DESs) are obtained by combining Hydrogen Bond Acceptors (HBAs) and Hydrogen Bond Donors (HBDs) in specific molar ratios. Since their first appearance in the literature in 2003, they have shown a wide range of applications, ranging from the selective extraction of biomass or metals to medicine, as well as from pollution control systems to catalytic active solvents and co-solvents. The very peculiar physical properties of DESs, such as the elevated density and viscosity, reduced conductivity, improved solvent ability and a peculiar optical behavior, can be exploited for engineering modular systems which cannot be obtained with other non-eutectic mixtures. In the present review, selected DESs research fields, as their use in materials synthesis, as solvents for volatile organic compounds, as ingredients in pharmaceutical formulations and as active solvents and cosolvents in organic synthesis, are reported and discussed in terms of application and future perspectives.

Hydrophobic Deep Eutectic Solvents for the Recovery of Bio-Based Chemicals: Solid–Liquid Equilibria and Liquid–Liquid Extraction

The solid–liquid equilibrium (SLE) behavior and liquid–liquid extraction (LLX) abilities of deep eutectic solvents (DESs) containing (a) thymol and L-menthol, and (b) trioctylphosphine oxide (TOPO) and L-menthol were evaluated. The distribution coefficients (KD) were determined for the solutes relevant for two biorefinery cases, including formic acid, levulinic acid, furfural, acetic acid, propionic acid, butyric acid, and L-lactic acid. Overall, for both cases, an increasing KD was observed for both DESs for acids increasing in size and thus hydrophobicity. Furfural, being the most hydrophobic, was seen to extract the highest KD (for DES (a) 14.2 ± 2.2 and (b) 4.1 ± 0.3), and the KD of lactic acid was small, independent of the DESs (DES (a) 0.5 ± 0.07 and DES (b) 0.4 ± 0.05). The KD of the acids for the TOPO and L-menthol DES were in similar ranges as for traditional TOPO-containing composite solvents, while for the thymol/L-menthol DES, in the absence of the Lewis base functionality, a smaller KD was observed. The selectivity of formic acid and levulinic acid separation was different for the two DESs investigated because of the acid–base interaction of the phosphine group. The thymol and L-menthol DES was selective towards levulinic acid (Sij = 9.3 ± 0.10, and the TOPO and L-menthol DES was selective towards FA (Sij = 2.1 ± 0.28).

The Structures of ZnCl2-Ethanol Mixtures, a Spectroscopic and Quantum Chemical Calculation Study

We report in this article the structural properties, spectral behavior and heterogeneity of ZnCl₂-ethanol (EtOH) mixtures in a wide-composition range (1:3 to 1:14 in molar ratios), using ATR-FTIR spectroscopy and quantum chemical calculations. To improve the resolution of the initial IR spectra, excess spectroscopy and two-dimensional correlation spectroscopy were employed. The transformation process was suggested to be from EtOH trimer and EtOH tetramer to EtOH monomer, EtOH dimer and ZnCl₂-3EtOH complex upon mixing. The theoretical findings showed that increasing the content of EtOH was accompanied with the flow of negative charge to ZnCl₂. This led to reinforcement of the Zn←O coordination bonds, increase of the ionic character of Zn‒Cl bond and weakening and even dissociation of the Zn‒Cl bond. It was found that in some of the ZnCl₂-EtOH complexes optimized at the gas phase or under the solvent effect, there existed hydroxyls with a very special interactive array in the form of Cl‒Zn⁺←O‒H^…Cl^-, which incredibly red-shifted to wavenumbers <3000 cm^-1. This in-depth study shows the physical insights of the respective electrolyte alcoholic solutions, particularly the solvation process of the salt, help to rationalize the reported experimental results, and may shed light on understanding the properties of the deep eutectic solvents formed from ZnCl₂ and an alcohol.