Catalytic Strategies for the Cycloaddition of CO2 to Epoxides in Aqueous Media to Enhance the Activity and Recyclability of Molecular Organocatalysts

The cycloaddition of CO2 to epoxides to afford versatile and useful cyclic carbonate compounds is a highly investigated method for the nonreductive upcycling of CO2. One of the main focuses of the current research in this area is the discovery of readily available, sustainable, and inexpensive catalysts, and of catalytic methodologies that allow their seamless solvent-free recycling. Water, often regarded as an undesirable pollutant in the cycloaddition process, is progressively emerging as a helpful reaction component. On the one hand, it serves as an inexpensive hydrogen bond donor (HBD) to enhance the performance of ionic compounds; on the other hand, aqueous media allow the development of diverse catalytic protocols that can boost catalytic performance or ease the recycling of molecular catalysts. An overview of the advances in the use of aqueous and biphasic aqueous systems for the cycloaddition of CO2 to epoxides is provided in this work along with recommendations for possible future developments.

Intensified Continuous Flow Process for the Scalable Production of Bio-Based Glycerol Carbonate

A subtle combination of fundamental and applied organic chemistry toward process intensification is demonstrated for the large-scale production of bio-based glycerol carbonate under flow conditions. The direct carbonation of bio-based glycidol with CO2 is successfully carried out under intensified flow conditions, with Barton's base as a potent homogeneous organocatalyst. Process metrics for the CO2 coupling step (for the upstream production, output: 3.6 kg day-1 , Space Time Yield (STY): 2.7 kg h-1  L-1 , Environmental factor (E-factor): 4.7) outclass previous reports. High conversion and selectivity are achieved in less than 30 s of residence time at pilot scale with a stoichiometric amount of CO2 . Supporting DFT computations reveal the unique features of the mechanism in presence of Brønsted bases.

Synthesis of 5-(trifluoroacetyl)imidazoles from Bromoenones and Benzimidamides via Aza-Michael Initiated Ring Closure Reaction

INTRODUCTION

A simple method for the preparation of 5-(trifluoroacetyl)imidazoles was elaborated.

METHODS

The reaction of trifluoromethyl(α-bromoalkenyl)ketones with benzimidamides was employed to afford the target heterocycles in good yields.

RESULTS

The assembly of imidazole core proceeds via aza-Michael adduct formation followed by intramolecular nucleophilic substitution and spontaneous aromatization as an oxidation sequence.

CONCLUSION

The yields of target imidazoles can be improved by the use of soft oxidizing agents.

Synthesis of cyclic carbonates from CO2 cycloaddition to bio-based epoxides and glycerol: an overview of recent development

Anthropogenic carbon dioxide (CO₂) emissions contribute significantly to global warming and deplete fossil carbon resources, prompting a shift to bio-based raw materials. The two main technologies for reducing CO₂ emissions are capturing and either storing or utilizing it. However, while capture and storage have high reduction potential, they lack economic feasibility. Conversely, by utilizing the CO₂ captured from streams and air to produce valuable products, it can become an asset and curb greenhouse gas effects. CO₂ is a challenging C1-building block due to its high kinetic inertness and thermodynamic stability, requiring high temperature and pressure conditions and a reactive catalytic system. Nonetheless, cyclic carbonate production by reacting epoxides and CO₂ is a promising green and sustainable chemistry reaction, with enormous potential applications as an electrolyte in lithium-ion batteries, a green solvent, and a monomer in polycarbonate production. This review focuses on the most recent developments in the synthesis of cyclic carbonates from glycerol and bio-based epoxides, as well as efficient methods for chemically transforming CO₂ using flow chemistry and novel reactor designs.

Efficient imidazolium ionic liquid as a tri-functional robust catalyst for chemical fixation of CO2 into cyclic carbonates

The recent increase in CO₂ levels has had an extensive impact on the environment; hence an effective catalyst for chemical CO₂ fixation into value-added products is demanded. This work demonstrates a simple approach towards the chemical fixation of CO₂ to cyclic carbonates without solvent, metal and additives using one-pot synthesized tri-functional-imidazolium bromide ionic liquid. Herein, synthesized tri-functional-imidazolium-based ionic liquids, namely 3-(2-hydroxyethyl)-1-vinyl-1H-imidazole-3-ium bromide ([VIMEtOH][Br] (24 and 72 h)), 3-(2-hydroxyethyl)-1-vinyl-1H-imidazole-3-ium hydroxyl ([VIMEtOH][OH]) and poly 3-(2-hydroxyethyl)-1-vinyl-1H-imidazole-3-ium bromide (poly [VIMEtOH][Br]), were used for the comprehensive investigation of chemical fixation of CO₂ into cyclic carbonates and their physiochemical properties. In case of [VIMEtOH][Br] ionic liquid, it displayed time-dependent synthesis dissolution in the reaction system. This study found that [VIMEtOH][Br]-72 ionic liquid is not dissolved in the reaction system. The effect on the catalytic efficiency of the presence of functional groups in ionic liquids such as N-vinyl (-CC-N), acidic proton of imidazolium (-C (2)-H) and hydroxyl (-OH) along with bromide anion and the reaction conditions are systematically investigated. For CO₂ fixation, 99.6% conversion of propylene oxide with an excellent selectivity of propylene carbonate (≥99%) over [VIMEtOH][Br]-72 catalyst (at 120 °C, 2 MPa, 2 h) was observed without co-catalyst, metal and solvent. Also, it demonstrated an excellent wide substrates scope of epoxide and all reactions were performed on gram-scalable, which are potential prospects for industrial use.

Synthesis of Nonisocyanate Poly(hydroxy)urethanes from Bis(cyclic carbonates) and Polyamines

Nonisocyanate polyurethane materials with pending alcohol groups in the polymeric chain were synthesized by polyaddition reaction of bis(cyclic carbonates) onto diamines. For the platform molecule, 1,4-butanediol bis(glycidyl ether carbonate) (BGBC, 1) was used. The polyaddition reaction of 1 onto a wide range of diamines with different electronic and physical properties was explored. All PHUs were obtained quantitatively after 16 h at 80 °C temperature in MeCN as solvent. The low nucleophilicity of L-lysine has proven unable to ring-open the cyclic carbonate and, thus, no reaction occurred. The addition of DBU or TBD as the catalyst was tested and allows the obtention of the desired PHU. However, the presence of strong bases also led to the formation of polyurea fragments in the new PHU. The different poly(hydroxyurethane) materials were characterized using a wide range of spectroscopic techniques such as NMR, IR, MALDI-ToF, and using GPC studies. The thermal properties of the NIPUs were investigated by DSC and TGA analyses. Moreover, reactions employing different monomer ratios were performed, obtaining novel hydroxycarbamate compounds. Finally, sequential and one-pot experiments were also carried out to synthesize the PHUs polymers in one-step reaction.

Influence of Steric Effect on the Pseudo-Multicomponent Synthesis of N-Aroylmethyl-4-Arylimidazoles

A pseudo-three-component synthesis of N-aroylmethylimidazoles 3 with three new C-N bonds formed regioselectively under microwave conditions was developed. Products were obtained by reacting two equivalents of aroylmethyl bromide (ArCOCH₂Br, 1) with the appropriate amidine salt (RCN₂H₃.HX, 2) and with K₂CO₃ as a base in acetonitrile. The bicomponent reaction also occurred, giving the expected 4(5)-aryl-1H-imidazoles 4. Notably, the ratio of products 3 and 4 is governed by steric factors of the amidine 2 (i.e., R = H, CH₃, Ph). Therefore, a computational study was carried out to understand the reaction course regarding product ratio (3/4), regioselectivity, and the steric effects of the amidine substituent group.

Guanidyl-implanted UiO-66 as an efficient catalyst for the enhanced conversion of carbon dioxide into cyclic carbonates

The development of heterogeneous catalysts for promoting epoxide cycloaddition with carbon dioxide is highly desirable for recycling CO₂ and achieving the goal of carbon neutrality. Herein, we designed and synthesized Zr-based metal organic frameworks (MOFs) by implanting functional guanidyl into the framework via mixing different molar ratios of 4-guanidinobenzoic acid (Gua) with 1,4-benzenedicarboxylic acid (BDC). Consequently, a small sized Zr-MOF (∼350 nm) can be prepared by implanting Gua with 20% molar ligands, denoted as UiO-66-Gua_0.2(s). Compared to large sized and different guanidyl Zr-MOFs, UiO-66-Gua_0.2(s) exhibited an optimal activity on catalyzing epoxide cycloaddition with CO₂ in the presence of the Bu₄NBr cocatalyst. A yield of 97% for the product of chloropropene carbonate was achieved at 90 °C under 1 atm CO₂. The great performance of UiO-66-Gua_0.2(s) might be attributed to the synergistic effect of guanidyl groups as hydrogen-bond donors and Zr centers acting as Lewis-acidic sites. In addition, the heterogeneous catalyst of UiO-66-Gua_0.2(s) exhibited a great versatility towards converting other epoxides and a satisfactory recyclability for five consecutive runs. Moreover, a plausible reaction mechanism has been proposed for UiO-66-Gua_0.2(s) in promoting CO₂ epoxide cycloaddition reactions.

Efficient Synthesis of Cyclic Carbonates from Unsaturated Acids and Carbon Dioxide and their Application in the Synthesis of Biobased Polyurethanes

Bio-derived furan- and diacid-derived cyclic carbonates have been synthesized in high yields from terminal epoxides and CO₂ . Furthermore, four highly substituted terpene-derived cyclic carbonates were isolated in good yields with excellent diastereoselectivity in some cases. Eleven new cyclic carbonates derived from 10-undecenoic acid under mild reaction conditions were prepared, providing the corresponding carbonate products in excellent yields. The catalyst system also performed the conversion of an epoxidized fatty acid n-pentyl ester into a cyclic carbonate under relatively mild reaction conditions (80 °C, 20 bar, 24 h). This bis(cyclic carbonate) was obtained in high yields and with different cis/trans ratios depending on the co-catalyst used. An allyl alcohol by-product was only observed as a minor product when bis(triphenylphosphine)iminium chloride was used as co-catalyst. Finally, two cyclic carbonates were used as building blocks for the preparation of non-isocyanate poly(hydroxy)urethanes by reaction with 1,4-diaminobutane.

Mechanistic insights on CO2 utilization using sustainable catalysis

Caffeinium halides were used to catalyse the cycloaddition of CO2 to form cyclic carbonates. The reaction intermediates were isolated and characterized experimentally. The reaction mechanism has been confirmed by DFT calculations.

Cycloaddition mechanisms of CO2 and epoxide catalyzed by salophen – an organocatalyst free from metals and halides

The coupling mechanism of CO₂ and epichlorohydrin catalyzed by salophen is computed. A neutral concerted bifunctional mechanism of phenolate as nucleophile and phenol as H-bonding donor in epoxide ring-opening and CO₂ addition is suggested.

Imidazolium-based ionic liquid immobilized on functionalized magnetic hydrotalcite (Fe3O4/HT-IM): as an efficient heterogeneous magnetic nanocatalyst for chemical fixation of carbon dioxide under green conditions

Fe₃O₄/HT-IM with plate-like morphology was synthesized as a novel and highly effective magnetic nanocatalyst and applied in chemical fixation.

Highly Active CO2 Fixation into Cyclic Carbonates Catalyzed by Tetranuclear Aluminum Benzodiimidazole-Diylidene Adducts

A set of tetranuclear alkyl aluminum adducts 1 and 2 supported by benzodiimidazole-diylidene ligands L1, N,N’-(1,5-diisopropylbenzodiimidazole-2,6-diylidene)bis(propan-2-amine), and L2, N,N’-(1,5-dicyclohexyl-benzodiimidazole-2,6-diylidene)dicyclohexanamine were synthetized in exceptional yields and characterized by spectroscopic methods. These compounds were studied as catalysts for cyclic carbonate formation (3a–o) from their corresponding terminal epoxides (2a–o) and carbon dioxide utilizing tetrabutylammonium iodide as a nucleophile in the absence of a solvent. The experiments were carried out at 70 °C and 1 bar CO2 pressure for 24 h and adduct 1 was the most efficient catalyst for the synthesis of a large variety of monosubstituted cyclic carbonates with excellent conversions and yields.

Zinc Imine Polyhedral Oligomeric Silsesquioxane as a Quattro-Site Catalyst for the Synthesis of Cyclic Carbonates from Epoxides and Low-Pressure CO2

In the present research, the synthesis, spectroscopic characterization, and structural investigations of a unique Zn^II complex of imine-functionalized polyhedral oligomeric silsesquioxane (POSS) is designed, and hereby described, as a catalyst for the synthesis of cyclic carbonates from epoxides and CO₂. The uncommon features of the designed catalytic system is the elimination of the need for a high pressure of CO₂ and the significant shortening of reaction times commonly associated with such difficult transformations like that of styrene oxide to styrene carbonate. Our studies have shown that imine-POSS is able to chelate metal ions like Zn^II to form a unique coordination complex. The silsesquioxane core and the hindrance of the side arms (their steric effect) influence the construction process of the homoleptic Zn₄@POSS-1 complex. The compound was characterized in solution by NMR (¹H, ¹³C, ²⁹Si), ESI-MS, UV/Vis spectroscopy and in the solid state by thermogravimetric/differential thermal analysis (TG-DTA), elemental analysis, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), cross-polarization magic angle spinning (CP MAS) NMR (¹³C, ²⁹Si) spectroscopy, and X-ray crystallography.

Triazine-based Organic Polymer-catalysed Conversion of Epoxide to Cyclic Carbonate under Ambient CO2 Pressure

In this work we have achieved epoxide to cyclic carbonate conversion using a metal-free polymeric catalyst under ambient CO₂ pressure (1.02 atm) using a balloon setup. The triazine containing polymer (CYA-ANIS) was prepared from cyanuric chloride (CYA-Cl) and o-dianisidine (ANIS) in anhydrous DMF as solvent by refluxing under the N₂ gas environment. The presence of triazine and amine functional groups in the polymer results in the adsorption of CO₂ up to 7 cc/g at 273 K. This inspired us to utilize the polymer for the conversion of a series of functionalised epoxides into their corresponding cyclic carbonates in the presence of tetrabutyl ammonium iodide (TBAI) as co-catalyst. The product has wide range of applications like solvent in lithium ion battery, precursor for polycarbonate, etc. The catalyst was efficient for the conversion of different mono and di-epoxides into their corresponding cyclic carbonates under atmospheric pressure in the presence of TBAI as co-catalyst. The study indicates that epoxide attached with electron withdrawing groups (like, CH₂ Cl, glycidyl ether, etc.) displayed better conversion compared to simple alkane chain attached epoxides. This is mainly due to the stabilization of electron rich intermediates produced during the reaction (e. g. epoxide ring opening or CO₂ incorporation into the halo-alkoxide anion). This catalyst mixture was capable to maintain its reactivity up to five cycles without losing its activity. Post catalytic characterization clearly supports the heterogeneous and recyclable nature of the catalyst.

Recent advances in the synthesis of imidazoles

The review highlights the recent advances (2018-present) in the regiocontrolled synthesis of substituted imidazoles. These heterocycles are key components to functional molecules that are used in a variety of everyday applications. An emphasis has been placed on the bonds constructed during the formation of the imidazole. The utility of these methodologies based around the functional group compatibility of the process and resultant substitution patterns around the ring are described, including discussion of scope and limitations, reaction mechanisms and future challenges.

Imidazolium-Functionalized Ionic Hypercrosslinked Porous Polymers for Efficient Synthesis of Cyclic Carbonates from Simulated Flue Gas

The rapid growth of CO₂ emissions, especially from power plants, has led to the urgent need to directly capture and fix CO₂ in the flue gas after simple purification rather than energy-intensive gas separation. Herein, imidazolium-functionalized ionic hypercrosslinked porous polymers (HCPs) bearing adjustable surface groups were straightforwardly synthesized through co-hypercrosslinking of benzylimidazole salts and crosslinker through Friedel-Crafts alkylation. Abundant microporosity and relatively high ionic moieties were obtainable in the ethyl-group-tethered ionic HCP, giving a remarkably selective CO₂ capture performance with a CO₂ uptake of 3.05 mmol g^-1 and an ideal adsorbed solution theory (IAST) CO₂ /N₂ selectivity as high as 363 (273 K, 1 bar). This ionic polymer demonstrated high efficiency in the synthesis of cyclic carbonates from the coupling of various epoxides with the simulated flue gas (15 % CO₂ and 85 % N₂ ), giving high yields, large turnover numbers (up to 4800), and stable reusability under additive- and solvent-free conditions.

Aluminum complexes with new non-symmetric ferrocenyl amidine ligands and their application in CO2 transformation into cyclic carbonates

A set of alkyl aluminum complexes supported by non-symmetric ferrocenyl amidine ligands were used as catalysts for the preparation of cyclic carbonates from epoxides and carbon dioxide using Bu₄NI as a co-catalyst.

Novel Cobalt Complex as an Efficient Catalyst for Converting CO2 into Cyclic Carbonates under Mild Conditions

Based on the ligand H2dpPzda (1), a novel cobalt complex [Co(H2dpPzda)(NCS)2]·CH3OH(2) has been synthesized and characterized. The Complex 2 exhibited excellent catalytic performance for converting CO2 into cyclic carbonates under mild conditions. For propylene oxide (PO) and CO2 synthesis of propylene carbonate (PC), the catalytic system showed a remarkable TOF as high as 29,200 h−1. The catalytic system also showed broad substrate scope of epoxide. Additionally, the catalyst could be recycled to maintain the integrity of the structure and remained equal to the level of its catalytic activity even after seven catalytic rounds. Additionally, a possible catalytic mechanism was proposed due to the high catalytic activity which might be owing to the synergism of Lewis acidic metal centers and N group.

Life Cycle Assessment for the Organocatalytic Synthesis of Glycerol Carbonate Methacrylate

Bifunctional ammonium and phosphonium salts have been identified as potential organocatalysts for the synthesis of glycerol carbonate methacrylate (GCMA). Three of these catalysts showed high efficiency and allowed the conversion of glycidyl methacrylate with CO₂ to the desired product in >99 % conversion and selectivity. Subsequently, immobilized analogues of selected catalysts were prepared and tested. A phenol-substituted phosphonium salt on a silica support proved to be a promising candidate in recycling experiments. The same catalyst was used in 12 consecutive runs, resulting in GCMA yields of up to 88 %. Furthermore, a life cycle assessment was conducted for the synthesis of GCMA starting from epichlorohydrin (EPH) and methacrylic acid (MAA). For the functional unit of 1 kg GCMA, 15 wt % was attributed to the incorporation of CO₂ , which led to a reduction of the global warming potential of 3 % for the overall process.

Recent Advances in the Chemical Fixation of Carbon Dioxide: A Green Route to Carbonylated Heterocycle Synthesis

Carbon dioxide produced by human activities is one of the main contributions responsible for the greenhouse effect, which is modifying the Earth’s climate. Therefore, post-combustion CO2 capture and its conversion into high value-added chemicals are integral parts of today’s green industry. On the other hand, carbon dioxide is a ubiquitous, cheap, abundant, non-toxic, non-flammable and renewable C1 source. Among CO2 usages, this review aims to summarize and discuss the advances in the reaction of CO2, in the synthesis of cyclic carbonates, carbamates, and ureas appeared in the literature since 2017.

Influence of the Counterion on the Synthesis of Cyclic Carbonates Catalyzed by Bifunctional Aluminum Complexes

New bifunctional aluminum complexes have been prepared with the aim of studying the effect of a counterion on the synthesis of cyclic carbonates from epoxides and carbon dioxide (CO₂). Neutral ligand 1 was used as a precursor to obtain four novel mesylate, chloride, bromide, and iodide zwitterionic NNO ligands (2-5). The reaction of these ligands with 1 or 2 equiv of AlR₃ (R = Me, Et) allowed the synthesis of mono- and bimetallic bifunctional aluminum complexes [AlR₂(κ²-mbpzappe)]X [X = Cl, R = Me (6), Et (7); X = Br, R = Me (8), Et (9); X = I, R = Me (10), Et (11)] and [{AlR₂(κ²-mbpzappe)}(μ-O){AlR₃}]X [X = MeSO₃, R = Me (12), Et (13); X = Cl, R = Me (14), Et (15); X = Br, R = Me (16), Et (17); X = I, R = Me (18), Et (19)] via alkane elimination. These complexes were studied as catalysts for the synthesis of cyclic carbonates from epoxides and CO₂. Iodide complex 11 showed to be the most active catalyst for terminal epoxides, whereas bromide complex 9 was found to be the optimal catalyst when internal epoxides were used, showing the importance of the nucleophile cocatalyst on the catalytic activity.

Bifunctional silanol-based HBD catalysts for CO2 fixation into cyclic carbonates

Unprecedented silanol-based bifunctional HBD catalysts with tetraalkylammonium units directly incorporated into their structures were prepared from tailor-made silanols and used in the preparation of cyclic carbonates.

Aromatic guanidines as highly active binary catalytic systems for the fixation of CO2 into cyclic carbonates under mild conditions

The formation of hydrogen bonding causes a considerable decrease in the reaction temperature and CO₂ pressure used in this process.

En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates

The strategies and challenges in the preparation of fully renewable materials prepared from CO₂ and biomass enabled by catalysis are presented.

Synthesis of well-defined yttrium-based Lewis acids by capturing a reaction intermediate and catalytic application for cycloaddition of CO2 to epoxides under atmospheric pressure

Single-site yttrium complexes were prepared by immobilization of an intermediate of cycloaddition of CO₂ to epoxides and applied in catalysis.

Sustainable Heterogeneous Catalysts for CO2 Utilization by Using Dual Ligand ZnII /CdII Metal-Organic Frameworks

Two-dimensional Zn^II /Cd^II -based dual ligand metal-organic frameworks (MOFs) {[M(CHDC)(L)]⋅H₂ O}_n involving 4-pyridyl carboxaldehyde isonicotinoylhydrazone (L) in combination with flexible 1,4-cyclohexanedicarboxylic acid (H₂ CHDC) as linkers have been synthesized by adaptable synthetic protocols including a green mechanochemical (grinding) method. Characterization, chemical/thermal stability, phase purity, and solid-state luminescent properties of both MOFs have been established by various analytical methods. Structural analysis revealed dimeric metal clusters composed of [M₂ (CHDC)₂ ]_n loops doubly pillared with L, generating a 2D framework. Both MOFs can be used as highly active solvent-free binary catalysts for CO₂ cycloaddition with epoxides in the presence of the co-catalyst tetrabutylammonium bromide (TBAB) with good catalytic conversion in up to six catalytic cycles without significant loss of activity. The present investigation demonstrates the application of MOFs as efficient heterogeneous catalysts for CO₂ utilization under moderate reaction conditions. Based on the single-crystal X-ray data, a probable mechanism for the cycloaddition reaction has also been proposed.