Hierarchical Cu2S nanorods with different crystal phases for asymmetrical supercapacitors and visible-light photocatalysis

Enhanced Wire-Shaped Micro-Supercapacitor Treated with a Continuous Surface Atmospheric Pressure Plasma Jet Approach

Microscale, wire-shaped flexible supercapacitors are gaining significant attention due to the growing demand for wearable electronics and microrobotic technologies. Among various materials, copper sulfide stands out as an ideal candidate because of its superior electrochemical properties, which can be attributed to its nanostructured composition. This structure enhances the surface area, reduces ion transport distances, and improves charge-discharge kinetics. However, conventional electrode synthesis methods-such as annealing and hydrothermal processes-are limited by long production times and scalability issues, making them unsuitable for wire-shaped supercapacitor development. In this study, an innovative fabrication technique using an atmospheric pressure plasma jet (APPJ) for both surface treatment and material synthesis is proposed. By integrating the APPJ with a winding mechanism, roll-to-roll processing for continuous production is enabled, significantly enhancing the scalability of the manufacturing process. The fabricated wire-shaped microscale electrodes demonstrate high specific capacitance (153.39 mF cm-2), specific energy density (15.48 µWh cm-2), and excellent capacitance retention (91.32%) after 30 000 charge-discharge cycles. Furthermore, a wire-shaped solid-state flexible asymmetric supercapacitor is assembled using the fabricated electrodes in a coaxial configuration. The supercapacitor exhibits exceptional flexibility and energy storage performance, underscoring the practical applicability of the proposed method for advanced electronics.

Conformal sulfidation of HKUST-1 for constructing porous Cu2S/CuO octahedrons realizing highly sensitive non-enzymatic glucose detection

Metal-organic frameworks (MOFs) are believed to be promising precursors for constructing novel and efficient catalysts for glucose sensing. Herein, HKUST-1 precursors are first fabricated using a one-pot hydrothermal approach, and then HKUST-1 is converted into porous Cu2S/CuO octahedrons through conformal sulfidation with the help of OH-ions. The as-obtained Cu2S/CuO composite can provide rich electrochemical active sites and promoted electric transfer kinetics. Benefiting from these combined merits, the as-fabricated Cu2S/CuO composite is confirmed to be a high-performance catalyst, with high sensitivities of 8269.45 and 4140.82μA mM-1cm-2in the corresponding ranges of 0.05 ∼ 0.6 mM and 0.6 ∼ 1.2 mM, respectively. Moreover, the as-prepared electrode materials possess good anti-interference ability, reproducibility and long-term stability. This work opens up new avenues for the design and preparation of transition metal sulfide composites.

Layer-Structured Anisotropic Metal Chalcogenides: Recent Advances in Synthesis, Modulation, and Applications

The unique electronic and catalytic properties emerging from low symmetry anisotropic (1D and 2D) metal chalcogenides (MCs) have generated tremendous interest for use in next generation electronics, optoelectronics, electrochemical energy storage devices, and chemical sensing devices. Despite many proof-of-concept demonstrations so far, the full potential of anisotropic chalcogenides has yet to be investigated. This article provides a comprehensive overview of the recent progress made in the synthesis, mechanistic understanding, property modulation strategies, and applications of the anisotropic chalcogenides. It begins with an introduction to the basic crystal structures, and then the unique physical and chemical properties of 1D and 2D MCs. Controlled synthetic routes for anisotropic MC crystals are summarized with example advances in the solution-phase synthesis, vapor-phase synthesis, and exfoliation. Several important approaches to modulate dimensions, phases, compositions, defects, and heterostructures of anisotropic MCs are discussed. Recent significant advances in applications are highlighted for electronics, optoelectronic devices, catalysts, batteries, supercapacitors, sensing platforms, and thermoelectric devices. The article ends with prospects for future opportunities and challenges to be addressed in the academic research and practical engineering of anisotropic MCs.

Quasi-aligned Cu2S/Cu(OH)2nanorod arrays anchored on Cu foam as self-supported electrode for non-enzymatic glucose detection

Self-supported Cu₂S/Cu(OH)₂composite nanorods for highly sensitive non-enzymatic glucose sensing werein situgrown on Cu foam by simple hydrothermal treatment of aligned Cu(OH)₂nanorods. The physicochemical and electrochemical properties of the as-fabricated Cu₂S/Cu(OH)₂composite nanorods were characterized by scanning electron microscopy, transmission electron microscopy, x-ray diffraction, Raman spectroscope, x-ray photoelectron spectroscope, cyclic voltammetry, electrochemical impedance spectroscopy, amperometrici-tmeasurements. The mechanism of the composite nanorods produced on conductive substrates was also explored. The electrode exhibits a sensitivity of 9626.88μA mM^-1cm^-2towards glucose with good anti-interference ability, indicating it a promising electrode material for the enhanced non-enzymatic glucose detection.

Sulfide-Based Photocatalysts Using Visible Light, with Special Focus on In2S3, SnS2 and ZnIn2S4

Sulfides are frequently used as photocatalysts, since they absorb visible light better than many oxides. They have the disadvantage of being more easily photocorroded. This occurs mostly in oxidizing conditions; therefore, they are commonly used instead in reduction processes, such as CO2 reduction to fuels or H2 production. Here a summary will be presented of a number of sulfides used in several photocatalytic processes; where appropriate, some recent reviews will be presented of their behaviour. Results obtained in recent years by our group using some octahedral sulfides will be shown, showing how to determine their wavelength-dependent photocatalytic activities, checking their mechanisms in some cases, and verifying how they can be modified to extend their wavelength range of activity. It will be shown here as well how using photocatalytic or photoelectrochemical setups, by combining some enzymes with these sulfides, allows achieving the photo-splitting of water into H2 and O2, thus constituting a scheme of artificial photosynthesis.

Stretchable, Biocompatible, and Multifunctional Silk Fibroin-Based Hydrogels toward Wearable Strain/Pressure Sensors and Triboelectric Nanogenerators

Nowadays, great effort has been devoted to establishing wearable electronics with excellent stretchability, high sensitivity, good mechanical strength, and multifunctional characteristics. Herein, a soft conductive hydrogel is rationally designed by proportionally mixing silk fibroin, polyacrylamide, graphene oxide, and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate). The resultant hydrogel has considerable stretchability and compressibility, which enables it to be assembled into a strain/pressure sensor with a wide sensing range (strain, 2%-600%; pressure, 0.5-119.4 kPa) and reliable stability. Then, the corresponding sensor is capable of monitoring a series of physical signals of the human body (e.g., joint movement, facial gesture, pulse, breathing, etc.). In particular, the hydrogel-based sensor is biocompatible, with no anaphylactic reaction on human skin. More interestingly, this conductive hydrogel exhibits a positive response when it works in a triboelectric nanogenerator; consequently, it lights up 20 commericial green light-emitting diodes. Thus, this silk fibroin-based hydrogel is a kind of multifunctional material toward wearable electronics with versatile applications in health and exercise monitors, soft robots, and power sources.

Metal–organic framework templated fabrication of Cu7S4@Ni(OH)2 core–shell nanoarrays for high-performance supercapacitors

Core–cell Cu₇S₄@Ni(OH)₂ nanorod arrays were fabricated by using metal–organic frameworks as templates, and showed high specific capacitance, superior rate capacity and excellent cycling stability for supercapacitors.