Revealing the nature of low-temperature photoluminescence peaks by laser treatment in van der Waals epitaxially grown WS2 monolayers

Acoustic Modulation of Excitonic Complexes in hBN/WSe2/hBN Heterostructures

The interaction of high-frequency surface acoustic waves (SAWs) and excitons in van der Waals heterostructures (vdWHs) offers challenging opportunities to explore novel quantum effects and functionalities. We probe the interaction of neutral excitons, trions, and biexcitons with SAWs in a hBN/WSe2/hBN vdWH. We show that neutral excitons respond weakly to the SAW stimulus at 5 K. The remaining excitonic complexes, because of their lower binding energy or charged character, interact much more efficiently with the SAW piezoelectric field, particularly intra- and intervalley trions. At room temperature, the SAW can play a dual role (sometimes dissociating excitons and sometimes increasing the vdWH local doping density) which depends of the laser-induced photodoping of the vdWH prior to the SAW generation and the role of metastable energy states in the SAW-induced carrier dynamics. Our results shed light in the unexplored biexciton modulation with SAWs, important for 2D materials-based optoelectronic and energy harvesting devices.

Facilitating Uniform Large-Scale MoS2, WS2 Monolayers, and Their Heterostructures through van der Waals Epitaxy

The fabrication process for the uniform large-scale MoS₂, WS₂ transition-metal dichalcogenides (TMDCs) monolayers, and their heterostructures has been developed by van der Waals epitaxy (VdWE) through the reaction of MoCl₅ or WCl₆ precursors and the reactive gas H₂S to form MoS₂ or WS₂ monolayers, respectively. The heterostructures of MoS₂/WS₂ or WS₂/MoS₂ can be easily achieved by changing the precursor from WCl₆ to MoCl₅ once the WS₂ monolayer has been fabricated or switching the precursor from MoCl₅ to WCl₆ after the MoS₂ monolayer has been deposited on the substrate. These VdWE-grown MoS₂, WS₂ monolayers, and their heterostructures have been successfully deposited on Si wafers with 300 nm SiO₂ coating (300 nm SiO₂/Si), quartz glass, fused silica, and sapphire substrates using the protocol that we have developed. We have characterized these TMDCs materials with a range of tools/techniques including scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), micro-Raman analysis, photoluminescence (PL), atomic force microscopy (AFM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and selected-area electron diffraction (SAED). The band alignment and large-scale uniformity of MoS₂/WS₂ heterostructures have also been evaluated with PL spectroscopy. This process and resulting large-scale MoS₂, WS₂ monolayers, and their heterostructures have demonstrated promising solutions for the applications in next-generation nanoelectronics, nanophotonics, and quantum technology.

Low Energy Switching of Phase Change Materials Using a 2D Thermal Boundary Layer

The switchable optical and electrical properties of phase change materials (PCMs) are finding new applications beyond data storage in reconfigurable photonic devices. However, high power heat pulses are needed to melt-quench the material from crystalline to amorphous. This is especially true in silicon photonics, where the high thermal conductivity of the waveguide material makes heating the PCM energy inefficient. Here, we improve the energy efficiency of the laser-induced phase transitions by inserting a layer of two-dimensional (2D) material, either MoS₂ or WS₂, between the silica or silicon substrate and the PCM. The 2D material reduces the required laser power by at least 40% during the amorphization (RESET) process, depending on the substrate. Thermal simulations confirm that both MoS₂ and WS₂ 2D layers act as a thermal barrier, which efficiently confines energy within the PCM layer. Remarkably, the thermal insulation effect of the 2D layer is equivalent to a ∼100 nm layer of SiO₂. The high thermal boundary resistance induced by the van der Waals (vdW)-bonded layers limits the thermal diffusion through the layer interface. Hence, 2D materials with stable vdW interfaces can be used to improve the thermal efficiency of PCM-tuned Si photonic devices. Furthermore, our waveguide simulations show that the 2D layer does not affect the propagating mode in the Si waveguide; thus, this simple additional thin film produces a substantial energy efficiency improvement without degrading the optical performance of the waveguide. Our findings pave the way for energy-efficient laser-induced structural phase transitions in PCM-based reconfigurable photonic devices.

Theory of Excitons in Atomically Thin Semiconductors: Tight-Binding Approach

Atomically thin semiconductors from the transition metal dichalcogenide family are materials in which the optical response is dominated by strongly bound excitonic complexes. Here, we present a theory of excitons in two-dimensional semiconductors using a tight-binding model of the electronic structure. In the first part, we review extensive literature on 2D van der Waals materials, with particular focus on their optical response from both experimental and theoretical points of view. In the second part, we discuss our ab initio calculations of the electronic structure of MoS2, representative of a wide class of materials, and review our minimal tight-binding model, which reproduces low-energy physics around the Fermi level and, at the same time, allows for the understanding of their electronic structure. Next, we describe how electron-hole pair excitations from the mean-field-level ground state are constructed. The electron-electron interactions mix the electron-hole pair excitations, resulting in excitonic wave functions and energies obtained by solving the Bethe-Salpeter equation. This is enabled by the efficient computation of the Coulomb matrix elements optimized for two-dimensional crystals. Next, we discuss non-local screening in various geometries usually used in experiments. We conclude with a discussion of the fine structure and excited excitonic spectra. In particular, we discuss the effect of band nesting on the exciton fine structure; Coulomb interactions; and the topology of the wave functions, screening and dielectric environment. Finally, we follow by adding another layer and discuss excitons in heterostructures built from two-dimensional semiconductors.

Electrical and optical properties of transition metal dichalcogenides on talc dielectrics

Advanced van der Waals (vdW) heterostructure devices rely on the incorporation of high quality dielectric materials which need to possess a low defect density as well as being atomically smooth and uniform. In this work we explore the use of talc dielectrics as a potentially clean alternative substrate to hexagonal boron nitride (hBN) for few-layer transition metal dichalcogenide (TMDC) transistors and excitonic TMDC monolayers. We find that talc dielectric transistors show small hysteresis which does not depend strongly on sweep rate and show negligible leakage current for our studied dielectric thicknesses. We also show narrow photoluminescence linewidths down to 10 meV for different TMDC monolayers on talc which highlights that talc is a promising material for future van der Waals devices.

Enhancing and quantifying spatial homogeneity in monolayer WS2

Controlling the radiative properties of monolayer transition metal dichalcogenides is key to the development of atomically thin optoelectronic devices applicable to a wide range of industries. A common problem for exfoliated materials is the inherent disorder causing spatially varying nonradiative losses and therefore inhomogeneity. Here we demonstrate a five-fold reduction in the spatial inhomogeneity in monolayer WS2, resulting in enhanced overall photoluminescence emission and quality of WS2 flakes, by using an ambient-compatible laser illumination process. We propose a method to quantify spatial uniformity using statistics of spectral photoluminescence mapping. Analysis of the dynamic spectral changes shows that the enhancement is due to a spatially sensitive reduction of the charged exciton spectral weighting. The methods presented here are based on widely adopted instrumentation. They can be easily automated, making them ideal candidates for quality assessment of transition metal dichalcogenide materials, both in the laboratory and industrial environments.

Ultrafast nonequilibrium dynamic process of separate electrons and holes during exciton formation in few-layer tungsten disulfide

Femtosecond transient absorption spectroscopy has been employed to unravel separate initial nonequilibrium dynamic processes of photo-injected electrons and holes during the formation process of the lowest excitons at the K-valley in few-layer tungsten disulfide. Charge carrier thermalization and cooling, as well as concomitant many-body effects on the exciton resonances, are distinguished. The thermalization of holes is observed to be faster than that of electrons. Both of them proceed predominantly via carrier-carrier scattering, as evidenced by the observed dependence of the thermalization time on pump fluences. The fluence dependent time constants also suggest that the subsequent cooling for electrons is probably dominated by acoustic phonons, whereas for holes it is mostly controlled by LO phonons. An extremely fast red- and blue-shift crossover followed by a slow blue-shift of exciton resonance was observed in the temporal evolution of exciton resonances by resonant exciton A excitation. The rapid red-shift could be due to the strong screening of the Coulomb interaction between quasi-free charge carriers in electron-hole plasma. The subsequent slow blue-shift is the net result of the competition among many-body effects in the hot-exciton cooling process. Our findings elucidate the carrier-selective ultrafast dynamics and their many-body effects, underpinning new possibilities for developing optoelectronic devices based on transport properties of a single type of carrier.

Narrow Excitonic Lines and Large-Scale Homogeneity of Transition-Metal Dichalcogenide Monolayers Grown by Molecular Beam Epitaxy on Hexagonal Boron Nitride

Monolayer transition-metal dichalcogenides (TMDs) manifest exceptional optical properties related to narrow excitonic resonances. However, these properties have been so far explored only for structures produced by techniques inducing considerable large-scale inhomogeneity. In contrast, techniques which are essentially free from this disadvantage, such as molecular beam epitaxy (MBE), have to date yielded only structures characterized by considerable spectral broadening, which hinders most of the interesting optical effects. Here, we report for the first time on the MBE-grown TMD exhibiting narrow and resolved spectral lines of neutral and charged exciton. Moreover, our material exhibits unprecedented high homogeneity of optical properties, with variation of the exciton energy as small as ±0.16 meV over a distance of tens of micrometers. Our recipe for MBE growth is presented for MoSe₂ and includes the use of atomically flat hexagonal boron nitride substrate. This recipe opens a possibility of producing TMD heterostructures with optical quality, dimensions, and homogeneity required for optoelectronic applications.

All-Optical Reversible Manipulation of Exciton and Trion Emissions in Monolayer WS2

Monolayer transition metal dichalcogenides (TMDs) are direct gap semiconductors with promising applications in diverse optoelectronic devices. To improve devices’ performance, recent investigations have been systematically focused on the tuning of their optical properties. However, an all-optical approach with the reversible feature is still a challenge. Here we demonstrate the tunability of the photoluminescence (PL) properties of monolayer WS₂ via laser irradiation. The broad-range and continuous modulation of PL intensity, as well as the conversion between neutral and charged excitons have been readily and reversibly achieved by only switching the two laser power densities. We attribute the reversible manipulation to the laser-assisted adsorption and desorption of gas molecules, which will deplete or release free electrons from the surface of WS₂ and thus modify its PL properties. This all-optical manipulation, with advantages of reversibility, quantitative control, and high spatial resolution, suggests promising applications of TMDs monolayers in optoelectronic and nanophotonic applications, such as erasable optical data storage, micropatterning, and display.