Flexible vanadium-doped Ni2P nanosheet arrays grown on carbon cloth for an efficient hydrogen evolution reaction

Vanadium-regulated nickel phosphide nanosheets for electrocatalytic sulfion upgrading and hydrogen production

The electrochemical sulfion oxidation reaction (SOR) is highly desirable to treat sulfion-rich wastewater and achieve energy-saving hydrogen production when coupled with the cathodic hydrogen evolution reaction (HER). Herein, we propose a thermodynamically favorable SOR to couple with the HER, and develop vanadium-doped nickel phosphide (V-Ni2P) nanosheets for simultaneously achieving energy-efficient hydrogen production and sulfur recovery. V doping can efficiently adjust the electronic structure and improve intrinsic activity of Ni2P, which exhibits outstanding electrocatalytic performances for the HER and SOR with low potentials of -0.093 and 0.313 V to afford 10 mA cm-2. Remarkably, the assembled V-Ni2P-based hybrid water electrolyzer coupling the HER with the SOR requires small cell voltages of 0.389 and 0.834 V at 10 and 300 mA cm-2, lower than those required in a traditional water electrolysis system (1.5 and 1.969 V), realizing low-cost sulfion upgrading to value-added sulfur and hydrogen generation. This work provides an approach for energy-saving hydrogen production and toxic waste degradation.

One-step electrodeposition synthesis of NiFePS on carbon cloth as self-supported electrodes for electrochemical overall water splitting

Electrocatalytic water splitting (EWS) for hydrogen production is considered an ideal strategy for utilizing renewable energy, reducing fossil fuel consumption, and addressing environmental pollution issues. Traditional noble metal electrocatalysts have excellent performance, but their cost is high. Developing efficient, stable, and relatively inexpensive dual functional electrocatalysts is crucial for promoting large-scale EWS hydrogen production processes. Herein, a simple one-step electrodeposition method was used to grow nickel-iron phosphorus-sulfides (NiFePS) on the surface of hydrophilic treated carbon cloth (CC). The resultant NiFePS/CC with a phosphorus to sulfur ratio of 1:4 exhibited the best electrocatalytic performance, requiring only -91 mV and 216 mV overpotentials to generate the current densities of 10 mA·cm-2 in hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. When it was used as a bifunctional electrocatalyst to overall water splitting (OWS), a voltage of 1.536 V can generate a current density of 10 mA·cm-2. The excellent electrocatalytic performance can be ascribed to two factors: 1) the CC with excellent conductivity serves as a growth substrate, reducing the impedance of charge transfer from the electrode to the electrolyte and accelerating the electron transfer rate; 2) The large number of ultra-thin nanosheets formed on the surface of the catalyst increase the electrochemical specific surface area, expose more reaction sites, and thus improve the electrocatalytic reaction performance. This work provides a new approach for designing efficient non-noble metal electrocatalysts for water splitting.

Charge Redistribution of Lattice-Mismatched Co─Cu3P Boosting pH-Universal Water/Seawater Hydrogen Evolution

Practical applications of the hydrogen evolution reaction (HER) rely on the development of highly efficient, stable, and low-cost catalysts. Tuning the electronic structure, morphology, and architecture of catalysts is an important way to realize efficient and stable HER electrocatalysts. Herein, Co-doped Cu3P-based sugar-gourd structures (Co─Cu3P/CF) are prepared on copper foam as active electrocatalysts for hydrogen evolution. This hierarchical structure facilitates fast mass transport during electrocatalysis. Notably, the introduction of Co not only induces a charge redistribution but also leads to lattice-mismatch on the atomic scale, which creates defects and performs as additional active sites. Therefore, Co─Cu3P/CF requires an overpotential of only 81, 111, 185, and 230 mV to reach currents of 50, 100, 500, and 1000 mA cm-2 in alkaline media and remains stable after 10 000 CV cycles in a row and up to 110 h i-t stability tests. In addition, it also shows excellent HER performance in water/seawater electrolytes of different pH values. Experimental and DFT show that the introduction of Co modulates the electronic and energy level structures of the catalyst, optimizes the adsorption and desorption behavior of the intermediate, reduces the water dissociation energy barrier during the reaction, accelerates the Volmer step reaction, and thus improves the HER performance.

Structure- and Morphology-Controlled Synthesis of Hexagonal Ni2-x Zn x P Nanocrystals and Their Composition-Dependent Electrocatalytic Activity for Hydrogen Evolution Reaction

Nickel phosphides are an emerging class of earth-abundant catalysts for hydrogen generation through water electrolysis. However, the hydrogen evolution reaction (HER) activity of Ni2P is lower than that of benchmark Pt group catalysts. To address this limitation, an integrated theoretical and experimental study was performed to enhance the HER activity and stability of hexagonal Ni2P through doping with synergistic transition metals. Among the nine dopants computationally studied, zinc emerged as an ideal candidate due to its ability to modulate the hydrogen binding free energy (ΔG H) closer to a thermoneutral value. Consequently, phase pure hexagonal Ni2-x Zn x P nanocrystals (NCs) with a solid spherical morphology, variable compositions (x = 0-17.14%), and size in the range of 6.8 ± 1.1-9.1 ± 1.1 nm were colloidally synthesized to investigate the HER activity and stability in alkaline electrolytes. As predicted, the HER performance was observed to be composition-dependent with Zn compositions (x) of 0.03, 0.07, and 0.15 demonstrating superior activity with overpotentials (η-10) of 188.67, 170.01, and 135.35 mV, respectively at a current density of -10 mA/cm2, in comparison to Ni2P NCs (216.2 ± 4.4 mV). Conversely, Ni2-x Zn x P NCs with x = 0.01, 0.38, 0.44, and 0.50 compositions showed a notable decrease in HER activity, with corresponding η-10 of 225.3 ± 3.2, 269.9 ± 4.3, 276.4 ± 3.7 and 263.9 ± 4.9 mV, respectively. The highest HER active catalyst was determined to be Ni1.85Zn0.15P NCs, featuring a Zn concentration of 5.24%, consistent with composition-dependent ΔG H calculations. The highest performing Ni1.85Zn0.15P NCs displayed a Heyrovsky HER mechanism, enhanced kinetics and electrochemically active surface area (ECSA), and superior corrosion tolerance with a negligible increase of η-10 after 10 h of continuous HER. This study provides critical insights into enhancing the performance of metal phosphides through doping-induced electronic structure variation, paving the way for the design of high-efficiency and durable nanostructures for heterogeneous catalytic studies.

Novel metalloporphyrin covalently functionalized polyphosphazene nanotubes for boosting the hydrogen evolution reaction

Herein, we demonstrate the first example of a novel electrocatalytic hybrid system (CoTPP-PZSNT) with a push-pull motif to boost hydrogen evolution reaction (HER) activity. CoTPP-PZSNT exhibits an efficient HER activity, with overpotentials of 157 and 109 mV at 10 mA cm-2 in 1.0 M KOH and 0.5 M H2SO4 solutions, respectively. The HER performance of CoTPP-PZSNT outperforms many previously reported HER catalysts, due to efficient charge transfer between each component.

Precious Metal Free Hydrogen Evolution Catalyst Design and Application

The quest to identify precious metal free hydrogen evolution reaction catalysts has received unprecedented attention in the past decade. In this Review, we focus our attention to recent developments in precious metal free hydrogen evolution reactions in acidic and alkaline electrolyte owing to their relevance to commercial and near-commercial low-temperature electrolyzers. We provide a detailed review and critical analysis of catalyst activity and stability performance measurements and metrics commonly deployed in the literature, as well as review best practices for experimental measurements (both in half-cell three-electrode configurations and in two-electrode device testing). In particular, we discuss the transition from laboratory-scale hydrogen evolution reaction (HER) catalyst measurements to those in single cells, which is a critical aspect crucial for scaling up from laboratory to industrial settings but often overlooked. Furthermore, we review the numerous catalyst design strategies deployed across the precious metal free HER literature. Subsequently, we showcase some of the most commonly investigated families of precious metal free HER catalysts; molybdenum disulfide-based, transition metal phosphides, and transition metal carbides for acidic electrolyte; nickel molybdenum and transition metal phosphides for alkaline. This includes a comprehensive analysis comparing the HER activity between several families of materials highlighting the recent stagnation with regards to enhancing the intrinsic activity of precious metal free hydrogen evolution reaction catalysts. Finally, we summarize future directions and provide recommendations for the field in this area of electrocatalysis.

Porous tremella-like NiMoP/CoP network electrodes as an efficient electrocatalyst

The design of efficient, stable and cost-effective electrocatalysts for the hydrogen evolution reaction holds substantial significance in water electrolysis, but it remains challenging. Tremella-like nickel-molybdenum bimetal phosphide encapsulated cobalt phosphide (NiMoP/CoP) with hierarchical architectures has been effectively synthesized on nickel foam (NF) via a straightforward hydrothermal followed by low-temperature phosphating method. Based on the unique structural benefits, it significantly increases the number of redox active centers, enhances the electrical conductivity of materials, and diminishes the ion diffusion path lengths, thereby promoting efficient electrolyte penetration and reducing the inherent resistance. The as-obtained NiMoP/CoP/NF electrocatalyst exhibited remarkable catalytic activity with an ultralow overpotential of 38 mV (10 mA cm-2) and low Tafel slope of 83 mV dec-1. The straightforward synthesis process and exceptional electrocatalytic properties of NiMoP/CoP/NF demonstrate great potential for the HER to replace the precious metal catalyst.

An electron-hole rich dual-site nickel catalyst for efficient photocatalytic overall water splitting

Photocatalysis offers an attractive strategy to upgrade H₂O to renewable fuel H₂. However, current photocatalytic hydrogen production technology often relies on additional sacrificial agents and noble metal cocatalysts, and there are limited photocatalysts possessing overall water splitting performance on their own. Here, we successfully construct an efficient catalytic system to realize overall water splitting, where hole-rich nickel phosphides (Ni₂P) with polymeric carbon-oxygen semiconductor (PCOS) is the site for oxygen generation and electron-rich Ni₂P with nickel sulfide (NiS) serves as the other site for producing H₂. The electron-hole rich Ni₂P based photocatalyst exhibits fast kinetics and a low thermodynamic energy barrier for overall water splitting with stoichiometric 2:1 hydrogen to oxygen ratio (150.7 μmol h^-1 H₂ and 70.2 μmol h^-1 O₂ produced per 100 mg photocatalyst) in a neutral solution. Density functional theory calculations show that the co-loading in Ni₂P and its hybridization with PCOS or NiS can effectively regulate the electronic structures of the surface active sites, alter the reaction pathway, reduce the reaction energy barrier, boost the overall water splitting activity. In comparison with reported literatures, such photocatalyst represents the excellent performance among all reported transition-metal oxides and/or transition-metal sulfides and is even superior to noble metal catalyst.

Electronic Structure Modulation Induced by Cobalt-doping and Lattice-Contracting on Armor-Like Ruthenium Oxide Drives pH-Universal Oxygen Evolution

Exquisite design of RuO₂ -based catalysts to simultaneously improve activity and stability under harsh conditions and reduce the Ru dosage is crucial for advancing energy conversion involving oxygen evolution reaction (OER). Herein, a distinctive cobalt-doped RuO_x framework is constructed on Co₃ O₄ nanocones (Co₃ O₄ @CoRuO_x ) as a promising strategy to realize above urgent desires. Extensive experimental characterization and theoretical analysis demonstrate that cobalt doped in RuO_x lattice brings the oxygen vacancies and lattice contraction, which jointly redistribute the electron configuration of RuO_x . The optimized d-band center balances the adsorption energies of oxygenated intermediates, lowing the thermodynamical barrier of the rate-determining step; and meanwhile, the over-oxidation and dissolution of Ru species are restrained because of the p-band down-shifting of the lattice oxygen. Co₃ O₄ @CoRuO_x with 3.7 wt.% Ru delivers the extremely low OER overpotentials at 10 mA cm^-2 in alkaline (167 mV), neutral (229 mV), and acidic electrolytes (161 mV), and super operating stability over dozens of hours. The unprecedented activity ranks first in all pH-universal OER catalysts reported so far. These findings provide a route to produce robust low-loading Ru catalysts and an engineering approach for regulating the central active metal through synergy of co-existing defects to improve the catalytic performance and stability.

Interfacial Strain-Modulated Nanospherical Ni2 P by Heteronuclei-Mediated Growth on Ti3 C2 Tx MXene for Efficient Hydrogen Evolution

Interface modulation of nickel phosphide (Ni₂ P) to produce an optimal catalytic activation barrier has been considered a promising approach to enhance the hydrogen production activity via water splitting. Herein, heteronuclei-mediated in situ growth of hollow Ni₂ P nanospheres on a surface defect-engineered titanium carbide (Ti₃ C₂ T_x ) MXene showing high electrochemical activity for the hydrogen evolution reaction (HER) is demonstrated. The heteronucleation drives intrinsic strain in hexagonal Ni₂ P with an observable distortion at the Ni₂ P@Ti₃ C₂ T_x MXene heterointerface, which leads to charge redistribution and improved charge transfer at the interface between the two components. The strain at the Ni₂ P@Ti₃ C₂ T_x MXene heterointerface significantly boosts the electrochemical catalytic activities and stability toward HER in an acidic medium via a combination between experimental results and theoretical calculations. In a 0.5 m H₂ SO₄ electrolyte, the Ni₂ P@Ti₃ C₂ T_x MXene hybrid shows excellent HER catalytic performance, requiring an overpotential of 123.6 mV to achieve 10 mA cm^-2 with a Tafel slope of 39 mV dec^-1 and impressive durability over 24 h operation. This approach presents a significant potential to rationally design advanced catalysts coupled with 2D materials and transition metal-based compounds for state-of-the-art high efficiency energy conversions.

Recent advances in solution assisted synthesis of transition metal chalcogenides for photo-electrocatalytic hydrogen evolution

Hydrogen evolution from water splitting is considered to be an important renewable clean energy source and alternative to fossil fuels for future energy sustainability. Photocatalytic and electrocatalytic water splitting is considered to be an effective method for the sustainable production of clean energy, H₂. This perspective especially emphasizes research advances in the solution-assisted synthesis of transition metal chalcogenides for both photo and electrocatalytic hydrogen evolution applications. Transition metal chalcogenides (CdS, MoS₂, WS₂, TiS₂, TaS₂, ReS₂, MoSe₂, and WSe₂) have received intensified research interest over the past two decades on account of their unique properties and great potential across a wide range of applications. The photocatalytic activity of transition metal chalcogenides can further be improved by elemental doping, heterojunction formation with noble metals (Au, Pt, etc.), non-chalcogenides (MoS₂, In₂S₃, NiS_1-X), morphological tuning, through various solution-assisted synthesis processes, including liquid-phase exfoliation, heat-up, hot-injection methods, hydrothermal/solvothermal routes and template-mediated synthesis processes. In this review we will discuss recent developments in transition metal chalcogenides (TMCs), the role of TMCs for hydrogen production and various strategies for surface functionalization to increase their activity, different synthesis methods, and prospects of TMCs for hydrogen evolution. We have included a brief discussion on the effect of surface hydrogen binding energy and Gibbs free energy change for HER in electrocatalytic hydrogen evolution.

Nitrogen Disturbance Awakening the Intrinsic Activity of Nickel Phosphide for Boosted Hydrogen Evolution Reaction

Nickel phosphide (Ni₂ P) has emerged as a promising candidate to substitute Pt-based catalysts for hydrogen evolution reaction (HER) due to the hydrogenase-like catalytic mechanism and concomitantly low cost. However, its catalytic activity is still not comparable to that of noble-metal-based catalysts, and innovative strategies are still urgently needed to further improve its performance. Herein, a self-supported N-doped Ni₂ P on Ni foam (N-Ni₂ P/NF) was rationally designed and fabricated through a facile NH₄ H₂ PO₂ -assisted gas-solid reaction process. As an HER catalyst in alkaline medium, the obtained N-Ni₂ P/NF revealed excellent electrocatalytic performance with a distinctly low overpotential of 50 mV at 10 mA cm^-2 , a small Tafel slope of 45 mV dec^-1 , and long-term stability for 25 h. In addition, the spectroscopic characterizations and density functional theory calculations confirmed that the incorporation of N regulated the original electronic structure of Ni₂ P, enhanced its intrinsic catalytic property, optimized the Gibbs free energy of reaction intermediates, and ultimately promoted the HER process. This work provides an atomic-level insight into the electronic structure modulation of metal phosphides and opens an avenue for developing advanced transition metal phosphides-based catalysts.

Research progress in improving the oxygen evolution reaction by adjusting the 3d electronic structure of transition metal catalysts

As a clean and renewable energy carrier, hydrogen (H₂) has become an attractive alternative to dwindling fossil fuels. The key to realizing hydrogen-based energy systems is to develop efficient and economical hydrogen production methods. The water electrolysis technique has the advantages of cleanliness, sustainability, and high efficiency, which can be applied to large-scale hydrogen production. However, the electrocatalytic oxygen evolution reaction (OER) at the anode plays a decisive role in the efficiency of hydrogen evolution during water splitting. Generally, noble metal catalysts (such as ruthenium and iridium) are considered to exhibit the best OER performance; however, they exhibit disadvantages such as high costs, limited reserves, and poor stability. Therefore, the research on highly efficient non-noble metal catalysts that can replace their noble metal counterparts has always been important. This review presents the recent advances in the preparation of high-performance OER electrocatalysts by regulating the electronic structure of 3d transition metals. First, we introduce the reaction mechanism of water splitting and the OER, which reveals the high requirement of the complex four-electron process of the OER. Second, the electron transfer mode and development progress of highly active transition metal electrocatalysts are used to summarize the research situation of transition metal OER catalysts in water splitting. Finally, the future development direction and challenges of transition metal catalysts are prospected based on the current research progress.

Effect of cobalt phosphide (CoP) vacancies on its hydrogen evolution activity via water splitting: a theoretical study

Defect engineering plays an important role in improving the performance of catalysts. To clarify the roles of Co and P vacancies in CoP for water splitting, a theoretical study based on density functional theory was carried out in this paper. The geometric and electronic structures, activity and stability of the CoP (101)B surface, CoP (101)B with the Co vacancy (Co_vac) and the P vacancy (P_vac) are investigated. The results indicate that the CoP (101)B surface with P_vac and Co_vac can enhance the electron transfer to the surface. The P_vac will upward shift the Co d-band center near the vacancy site, which promotes the adsorption of H on the Co atom. As a result, the bridge Co-Co sites near the vacancy become the active sites for the hydrogen evolution reaction (HER) (ΔG_H* = 0.01 eV). The loss of the Co atom also results in an upward shift of its d-band center, which will enhance the H adsorption on the adjacent Co sites. The unevenly distributed electrons due to the presence of vacancies on the surface cause spontaneous dissociation of H₂O molecules. Furthermore, the thermodynamic analysis and surface energy find that the CoP (101)B and (101)B facets with Co_vac and P_vac present good stability. The current work has shed light onto the mechanism of water splitting on the surface of phosphide with vacancies. Our study suggests that engineering vacancies on CoP is a feasible route to improve its catalytic activity.

N, P-doped carbon supported ruthenium doped Rhenium phosphide with porous nanostructure for hydrogen evolution reaction using sustainable energies

Developing efficient and cost-effective catalysts for hydrogen evolution reaction (HER) is vital to hydrogen energy's commercial applications. In this study, N,P-doped carbon supported ruthenium (Ru) doped triruthenium tetraphosphide (Re₃P₄) (Ru-Re₃P₄/NPC) with porous nanostructure is prepared using the low-toxic melamine phosphate as the carbon and phosphorous source. The in-situ generated N,P-doped carbon layers play a pivotal role in regulating the electrocatalytic activity by avoiding the aggregation of the nanoparticles and increasing the specific surface area. Moreover, Ru doping contributes to the remarkable electrocatalytic performance of the prepared nanomaterials. Impressively, the as-synthesized Ru-Re₃P₄/NPC presents remarkable electrocatalytic performances toward HER with small overpotentials of 39 mV, 115 mV, and 88 mV to deliver 10 mA cm^-2 in alkaline, neutral, and acidic media. Moreover, the prepared electrocatalyst can drive water-splitting with a small potential of 1.45 V@10 mA cm^-2 and use sustainable energies, including solar, wind, and thermal, as electric resources. This work paves a novel and valuable way to enhance the electrocatalytic performances of metal phosphides.

W Doping in Ni12P5 as a Platform to Enhance Overall Electrochemical Water Splitting

Bifunctional electrocatalysts for efficient hydrogen generation from water splitting must overcome both the sluggish water dissociation step of the alkaline hydrogen evolution half-reaction (HER) and the kinetic barrier of the anodic oxygen evolution half-reaction (OER). Nickel phosphides are a promising catalysts family and are known to develop a thin active layer of oxidized Ni in an alkaline medium. Here, Ni₁₂P₅ was recognized as a suitable platform for the electrochemical production of γ-NiOOH─a particularly active phase─because of its matching crystallographic structure. The incorporation of tungsten by doping produces additional surface roughness, increases the electrochemical surface area (ESCA), and reduces the energy barrier for electron-coupled water dissociation (the Volmer step for the formation of H_ads). When serving as both the anode and cathode, the 15% W-Ni₁₂P₅ catalyst provides an overall water splitting current density of 10 mA cm^-2 at a cell voltage of only 1.73 V with good durability, making it a promising bifunctional catalyst for practical water electrolysis.

Directionally In Situ Self-Assembled, High-Density, Macropore-Oriented, CoP-Impregnated, 3D Hierarchical Porous Carbon Sheet Nanostructure for Superior Electrocatalysis in the Hydrogen Evolution Reaction

3D ZIF-67-particles-impregnated cellulose-nanofiber nanosheets with oriented macropores are synthesized via directional-freezing-assisted in situ self-assembly, and converted to 3D CoP-nanoparticle (NP)-embedded hierarchical, but macropores-oriented, N-doped carbon nanosheets via calcination and phosphidation. The obtained nanoarchitecture delivers overpotentials at 10 and 50 mA cm^-2 and Tafel slope of 82.1 and 113.4 mV and 40.8 mV dec^-1 in 0.5 M H₂ SO₄ , and of 97.1 and 136.6 mV and 51.2 mV dec^-1 in 1 M KOH, all of which are superior to those of the most reported non-noble-metal-based hydrogen evolution reaction (HER) catalysts. This catalyst even surpasses commercial Pt/C for a much lower overpotential at high current densities, which is essential for large-scale hydrogen production. Its catalytic activity can be further optimized to become one of the best in both 0.5 M H₂ SO₄ and 1 M KOH. The outstanding catalytic activity is ascribed to the uniformly-dispersed small CoP NPs in the 3D carbon sheets and the hierarchical nanostructure with rich oriented pores. This work develops a facile, economical, and universal self-assembly strategy to fabricate uniquely nanostructured hybrids to simultaneously promote charge transfer and mass transport, and also offers an inexpensive and high-performance HER catalyst toward industry-scale water splitting.

Controllable atom implantation for achieving Coulomb-force unbalance toward lattice distortion and vacancy construction for accelerated water splitting

Engineering lattice strain, especially when it combines with the lattice distortion and vacancy (LDV) induced by locally unbalanced Coulomb forces (LUCFs), can improve the local coordination environment of atoms to achieve synergistically active sites and dynamic regulation of electrocatalysts, which are beneficial to high-performance bifunctional water splitting. Considering that Ni-based selenides possess abundant variable valence states, the Nb/Fe diatomic heterogeneous spin states are purposely introduced to produce LUCFs for improving the electronic coordination environment of the materials. The as-prepared Nb/Fe co-doped Ni-Ses (NbFe-Ni_xSe_y) electrocatalyst exhibits the prominent oxygen and hydrogen evolution reaction (OER/HER) properties, with low overpotentials of 237 and 226 mV at 50 mA cm^-2, respectively. The alkaline water electrolyzer with NbFe-Ni_xSe_y as both anodic and cathodic electrodes only requires a cell potential of 1.7 V to reach 50 mA cm^-2 in a continuous operation of 50 h. This work provides a new insight to regulate the electronic structure of advanced catalyst materials at the atomic level through LUCFs-induced LDV and further push forward the energy conversion technology.

Progress in the development of heteroatom-doped nickel phosphates for electrocatalytic water splitting

Hydrogen energy is expected to replace fossil fuels as a mainstream energy source in the future. Currently, hydrogen production via water electrolysis yields high hydrogen purity with easy operation and without producing polluting side products. Presently, platinum group metals and their oxides are the most effective catalysts for water splitting; however, their low abundance and high cost hinder large-scale hydrogen production, especially in alkaline and neutral media. Therefore, the development of high-efficiency, durable, and low-cost electrocatalysts is crucial to improving the overpotential and lowering the electrical energy consumption. As a solution, Ni₂P has attracted particular attention, owing to its desirable electrical conductivity, high corrosion resistance, and remarkable catalytic activity for overall water splitting, and thus, is a promising substitute for platinum-group catalysts. However, the catalytic performance and durability of raw Ni₂P are still inferior to those of noble metal-based catalysts. Heteroatom doping is a universal strategy for enhancing the performance of Ni₂P for water electrolysis over a wide pH range, because the electronic structure and crystal structure of the catalyst can be modulated, and the adsorption energy of the reaction intermediates can be adjusted via doping, thus optimizing the reaction performance. In this review, first, the reaction mechanisms of water electrolysis, including the cathodic hydrogen evolution reaction and anodic oxygen evolution reaction, are briefly introduced. Then, progress into heteroatom-doped nickel phosphide research in recent years is assessed, and a discussion of each representative work is given. Finally, the opportunities and challenges for developing advanced Ni₂P based electrocatalysts are proposed and discussed.

Superhydrophilic nickel cyclotetraphosphate for the hydrogen evolution reaction in acidic solution

Nickel cyclotetraphosphate grown on carbon cloth (Ni₂P₄O₁₂/CC) is synthesized via an anion exchange reaction method and it shows excellent hydrogen evolution reaction (HER) activity and strong working stability in acid due to the merits of its unique polymer-like structure, mesoporous characteristics, and superhydrophilic surface.

Assembly of Copolymer and Metal-Organic Framework HKUST-1 to Form Cu2-xS/CNFs Intertwining Network for Efficient Electrocatalytic Hydrogen Evolution

The construction of complex intertwined networks that provide fast transport pathways for ions/electrons is very important for electrochemical systems such as water splitting, but a challenge. Herein, a three dimensional (3-D) intertwined network of Cu2-xS/CNFs (x = 0 or 0.04) has been synthesized through the morphology-preserved thermal transformation of the intertwined PEG-b-P4VP/ HKUST-1 hybrid networks. The strong interaction between PEG chains and Cu2+ is the key to the successful assembly of PEG-b-P4VP nanofibers and HKUST-1, which inhibits the HKUST-1 to form individual crystalline particles. The obtained Cu2-xS/CNFs composites possess several merits, such as highly exposed active sites, high-speed electronic transmission pathways, open pore structure, etc. Therefore, the 3-D intertwined hierarchical network of Cu2-xS/CNFs displays an excellent electrocatalytic activity for HER, with a low overpotential (η) of 276 mV to reach current densities of 10 mA cm-2, and a smaller Tafel slope of 59 mV dec-1 in alkaline solution.

Hydrogen adsorption trends on two metal-doped Ni2P surfaces for optimal catalyst design

In this study, we looked at the hydrogen evolution reaction on the doubly doped Ni3P2 terminated Ni2P surface. Two Ni atoms in the first three layers of the Ni2P surface model were exchanged with two transition metal atoms. We limited our investigation to combinations of Al, Co, and Fe based on their individual effectiveness as Ni2P dopants in our previous computational studies. The DFT calculated hydrogen adsorption free energy was employed as a predictor of the materials' catalytic HER activity. Our results indicate that the combination of Co and Fe dopants most improves the catalytic activity of the surface through the creation of multiple novel and active catalytic sites.

Heteroatom-Doping of Non-Noble Metal-Based Catalysts for Electrocatalytic Hydrogen Evolution: An Electronic Structure Tuning Strategy

Electrocatalytic water splitting for hydrogen production is an appealing way to reduce carbon emissions and generate renewable fuels. This promising process, however, is limited by its sluggish reaction kinetics and high-cost catalysts. Construction of low-cost and high-performance non-noble metal-based catalysts have been one of the most effective approaches to address these grand challenges. Notably, the electronic structure tuning strategy, which could subtly tailor the electronic states, band structures, and adsorption ability of the catalysts, has become a pivotal way to further enhance the electrochemical water splitting reactions based on non-noble metal-based catalysts. Particularly, heteroatom-doping plays an effective role in regulating the electronic structure and optimizing the intrinsic activity of the catalysts. Nevertheless, the reaction kinetics, and in particular, the functional mechanisms of the hetero-dopants in catalysts yet remains ambiguous. Herein, the recent progress is comprehensively reviewed in heteroatom doped non-noble metal-based electrocatalysts for hydrogen evolution reaction, particularly focus on the electronic tuning effect of hetero-dopants in the catalysts and the corresponding synthetic pathway, catalytic performance, and activity origin. This review also attempts to establish an intrinsic correlation between the localized electronic structures and the catalytic properties, so as to provide a good reference for developing advanced low-cost catalysts.

Nanostructured metal phosphides: from controllable synthesis to sustainable catalysis

Metal phosphides (MPs) with unique and desirable physicochemical properties provide promising potential in practical applications, such as the catalysis, gas/humidity sensor, environmental remediation, and energy storage fields, especially for transition metal phosphides (TMPs) and MPs consisting of group IIIA and IVA metal elements. Most studies, however, on the synthesis of MP nanomaterials still face intractable challenges, encompassing the need for a more thorough understanding of the growth mechanism, strategies for large-scale synthesis of targeted high-quality MPs, and practical achievement of functional applications. This review aims at providing a comprehensive update on the controllable synthetic strategies for MPs from various metal sources. Additionally, different passivation strategies for engineering the structural and electronic properties of MP nanostructures are scrutinized. Then, we showcase the implementable applications of MP-based materials in emerging sustainable catalytic fields including electrocatalysis, photocatalysis, mild thermocatalysis, and related hybrid systems. Finally, we offer a rational perspective on future opportunities and remaining challenges for the development of MPs in the materials science and sustainable catalysis fields.

CoP and Ni2P implanted in a hollow porous N-doped carbon polyhedron for pH universal hydrogen evolution reaction and alkaline overall water splitting

Developing low-cost and highly active bifunctional electrocatalysts for water splitting is very important but still remains a challenge. Herein, a novel bifunctional electrocatalyst composed of CoP and Ni2P nanoparticles implanted in a hollow porous N-doped carbon polyhedron (CoP/Ni2P@HPNCP) is synthesized by carbonization of Co/Ni-layered double hydroxide@zeolitic imidazolate framework-67 (Co/Ni-LDH@ZIF-67) followed by an oxidation and phosphorization strategy. The introduction of LDH can not only promote the formation of a hollow porous structure to supply more active sites, but also generate the CoP/Ni2P nanoheterostructure to afford extra active sites and modulate the electronic structure of the catalyst. As a result, CoP/Ni2P@HPNCP exhibits excellent pH universal hydrogen evolution reaction activity and alkaline oxygen evolution reaction activity. Furthermore, the electrolytic cell assembled from bifunctional CoP/Ni2P@HPNCP requires a cell voltage of 1.59 V in 1.0 M KOH at 10 mA cm-2, revealing its potential as a high performance bifunctional electrocatalyst.

Fe-Doped Co-Mo-S microtube: a highly efficient bifunctional electrocatalyst for overall water splitting in alkaline solution

Fe-Doped Co-Mo-S microtubes were successfully synthesized through a multistep synthetic route, employing MoO3 microrods as the sacrificial template, Co(NO3)2·6H2O and Fe(SO4)2·7H2O as the metal sources, 2-methylimidazole (2-MI) as the ligand and thioacetamide (TAA) as the S2- ion source. The as-prepared products were characterized by X-ray powder diffraction (XRD), energy dispersive spectrometry (EDS), inductively coupled plasma mass spectrometry (ICP-MS), X-ray photoelectron spectroscopy (XPS), (high-resolution) transmission electron microscopy (TEM/HRTEM) and HAADF-STEM-EDS elemental mapping. Experiments showed that the as-obtained Fe-doped Co-Mo-S microtube catalyst demanded overpotentials of ∼105 and 268 mV to afford the current density of -10 mA cm-2 for hydrogen evolution reaction (HER) and 10 mA cm-2 for oxygen evolution reaction (OER) with a durability of 60 h in 1.0 M KOH solution, respectively. In a two-electrode water-splitting device, the as-prepared Fe-doped Co-Mo-S microtubes acted as both anode and cathode simultaneously. To deliver a current density of 10 mA cm-2, a cell voltage of 1.605 V was required in 1.0 M KOH solution. After continuously catalyzing the overall water splitting for 60 h, the overpotential hardly changed, implying remarkable long-term stability. Obviously, the present Fe-doped Co-Mo-S microtubes have potential applications as bifunctional catalysts for electrochemical water splitting.

Mulberry-Inspired Nickel-Niobium Phosphide on Plasma-Defect-Engineered Carbon Support for High-Performance Hydrogen Evolution

Bimetallic phosphate electrocatalysts on carbon-cloth support are among the most promising industry-relevant solutions for electrocatalytic hydrogen production. To address the persistent issue of hetero-phase interfacing on carbon support while ensuring high activity and stability, a low-cost, high-performance hydrogen evolution reaction (HER) electrocatalyst is developed. Bi-phase Ni₁₂ P₅ -Ni₄ Nb₅ P₄ nanocrystals with rich heterointerfaces and phase edges are successfully fabricated on carbon cloth (CC), which is enabled by intentional defect creation by atmospheric pressure dielectric barrier discharge (DBD) plasma (PCC). The obtained Ni₁₂ P₅ -Ni₄ Nb₅ P₄ /PCC electrocatalyst exhibits excellent HER performance, heralded by the low overpotentials of 81 and 287 mV for delivering current densities of 10 (j₁₀ ) and 500 (j₅₀₀ ) mA cm^-2 , respectively. Meanwhile, the Ni₁₂ P₅ -Ni₄ Nb₅ P₄ /PCC maintains spectacular catalytic activity at high current density region (>j₆₁₅ ), which outperformed the industry-relevant benchmark Pt/C/PCC catalyst. The catalyst grown on the plasma-treated support shows remarkably longer operation and ultra-stable electrocatalytic characteristics over 100 h continuous operation. Ab initio numerical simulations reveal that Ni atoms exposed in the heterointerfaces act as the main catalytically active centers for HER.

Coupling 0D and 1D Carbons for Electrochemical Hydrogen Production Promoted by a Percolation Mechanism

Developing hydrogen evolution reaction (HER) electrocatalysts with high activity, durability and moderate price is essential for sustainable hydrogen energy utilization. Here, the facile coupling of carbon dots (CDs, 0D carbon materials) and carbon fibres (CFs, 1D carbon materials) for enhanced electrochemical hydrogen production was demonstrated. Electrochemical tests revealed that the CD/CF catalysts showed outstanding catalytic activity with a small overpotential of 280 mV at the current density of 10 mA cm^-2 , a small Tafel slope of 87 mV dec^-1 and prominent durability. Percolation theory was for the first time introduced to interpret the catalytic mechanism of the CD/CF catalysts. The special morphology assembled by the 0D carbons constituted the percolating clusters and promoted electron transport throughout the 1D carbons. The strategy and theory can be adapted to general electrocatalytic applications for achieving and interpreting precise tuning on highly efficient electron transfer in electrocatalysts.