Photocatalytic properties of a new Z-scheme system BaTiO3/In2S3 with a core–shell structure

Ag Nanoparticles Deposited onto BaTiO3 Aerogel for Highly Efficient Photodegradation

Given the increasingly severe environmental problems caused by water pollution, the degradation of organic dyes can be effectively achieved through the utilization of photocatalysis. In this work, metal alkoxides and a combination of alcohol/hydrophobic solvents are employed to prepare BaTiO3 aerogels via a liquid-phase and template-free synthetic route. The preparation process of the aerogels solely entails facile agitation and supercritical drying, eliminating the need for additional heat treatment. The binary solvent of ethanol and toluene is identified as the optimal choice, resulting in a significantly enhanced surface area (up to 223 m2/g) and an abundant pore structure of BaTiO3 aerogels compared to that of the BaTiO3 nanoparticles. Thus, the removal efficiency of the BaTiO3 aerogel sample for MO is nearly twice as high as that of the BaTiO3 nanoparticles sample. Noble metal Ag nanoparticles' deposition onto the BaTiO3 aerogel surface is further achieved via the photochemical deposition method, which enhances the capture of photogenerated electrons, thereby ensuring an elevated level of photocatalytic efficiency. As a result, Ag nanoparticles deposited on BaTiO3 aerogel can degrade MO completely after 40 min of illumination, while the corresponding aerogel before modification can only remove 80% of MO after 60 min. The present work not only complements the preparatory investigation of intricate aerogels but also offers a fresh perspective for the development of diverse perovskite aerogels with broad applications.

Ag-Incorporated Cr-Doped BaTiO3 Aerogel toward Enhanced Photocatalytic Degradation of Methyl Orange

A novel Cr-doped BaTiO3 aerogel was successfully synthesized using a co-gelation technique that involves two metallic alkoxides and a supercritical drying method. This freshly prepared aerogel has a high specific surface area of over 100 m2/g and exhibits improved responsiveness to the simulated sunlight spectrum. Methyl orange (MO) was chosen as the simulated pollutant, and the results reveal that the Cr-doped BaTiO3 aerogel, when modified with the noble metal silver (Ag), achieves a pollutant removal rate approximately 3.2 times higher than that of the commercially available P25, reaching up to 92% within 60 min. The excellent photocatalytic performance of the Ag-modified Cr-doped BaTiO3 aerogel can be primarily attributed to its extensive specific surface area and three-dimensional porous architecture. Furthermore, the incorporation of Ag nanoparticles effectively suppresses the recombination of photo-generated electrons and holes. Stability and reusability tests have confirmed the reliability of the Ag-modified Cr-doped BaTiO3 aerogel. Therefore, this material emerges as a highly promising candidate for the treatment of textile wastewater.

Heterostructured piezocatalytic nanoparticles with enhanced ultrasound response for efficient repair of infectious bone defects

Infection of bone defects remains a challenging issue in clinical practice, resulting in various complications. The current clinical treatments include antibiotic therapy and surgical debridement, which can cause drug-resistance and potential postoperative complications. Therefore, there is an urgent need for an efficient treatment to sterilize and promote bone repair in situ. In this work, an ultrasound responsive selenium modified barium titanate nanoparticle (Se@BTO NP) was fabricated, which exhibited significant antibacterial and bone regeneration effects. Selenium nanoparticle (Se NP) was modified on the surface of barium titanate nanoparticle (BTO NP) to form heterostructure, which facilitated the second distribution of piezo-induced carriers under ultrasound (US) irradiation and improved the separation of electron-hole pairs. The Se@BTO NPs exhibited remarkable antibacterial efficiency with an antibacterial rate of 99.23 % against Staphylococcus aureus (S.aureus) and significantly promoted the osteogenic differentiation under ultrasound irradiation. The in vivo experiments exhibited that Se@BTO NPs successfully repaired the femoral condylar bone defects of rats infected by S.aureus, resulting in significant promotion of bone regeneration. Overall, this work provided an innovative strategy for the utilization of US responsive nanomaterials in efficient bacteria elimination and bone regeneration. STATEMENT OF SIGNIFICANCE: Infectious bone defects remain a challenging issue in clinical practice. Current antibiotic therapy and surgical debridement has numerous limitations such as drug-resistance and potential complications. Herein, we designed an innovative ultrasound responsive selenium modified barium titanate nanoparticle (Se@BTO NP) to achieve efficient non-invasive bacteria elimination and bone regeneration. In this work, Se@BTO nanoparticles can enhance the separation of electrons and holes, facilitate the transfer of free carriers due to the cooperative effect of ultrasound induced piezoelectric field and heterojunction construction, and thus exhibit remarkable antibacterial and osteogenesis effect. Overall, our study provided a promising strategy for the utilization of piezocatalytic nanomaterials in efficient antibacterial and bone regeneration.

Solar light driven enhanced photocatalytic treatment of azo dye contaminated water based on Co-doped ZnO/ g-C3N4 nanocomposite

The current research concentrated on the Co-precipitation synthesis of g-C3N4 (CN), ZnO, ZnO/CN, and Co-doped ZnO/CN nanocomposite, as well as the solar light enhanced photocatalytic treatment of Reactive Red 120 (RR120) from genuine wool textile effluent. The 3D flower-like structure of Co-doped ZnO distributed on the surface of CN thin sheets, according to structural studies employing XRD and SEM examinations Electrochemical experiments exhibited that the Co-doped ZnO/CN nanocomposite has a large electroactive surface area. The optical band-gap values of CN, ZnO, ZnO/CN, and Co-doped ZnO/CN nanocomposites were 2.68, 3.13, 2.38, and 2.23 eV, respectively, according to optical characterizations. The synergistic effects and heterojunction produced by Co-doped ZnO and CN can be linked to the narrow gap in nanocomposites. After 75, 60, 50, and 40 min of exposure to solar light, photocatalytic degradation assays for 250 mL of 20 mg/L RR120 solution in the presence of CN, ZnO, ZnO/CN, and Co-doped ZnO/CN nanocomposites demonstrated 100% dye treatment. The applicability of photocatalysts for decolorization of 250 mL of 10 mg/L RR120 prepared from actual wool textile wastewater was investigated, and the results showed that Co-doped ZnO/CN nanocomposites for treatment of RR120 from actual wool textile wastewater were highly efficient at photocatalytic degradation.

Piezo-photocatalytic properties of BaTiO3/CeO2 nanoparticles with heterogeneous structure synthesized by a gel-assisted hydrothermal method

BaTiO3/CeO2 nanoparticles with heterogeneous structure were successfully synthesized via a gel-assisted hydrothermal method. The molar ratio of Ti/Ce was set as 1 : 0, 0.925 : 0.075, 0.9 : 0.1; 0.875 : 0.125, and 0.85 : 0.15 in the dried gels. Affected by the values of Ti/Ce, the particle sizes of hydrothermal products decreased obviously, and the surface of nanoparticles became rough and even had small protrusions. XRD, SEM, HRTEM, XPS, DRS, ESR, and PFM were used to characterize the nanoparticle textures. We speculated that the main body and surface of nanoparticles were BaTiO3 and CeO2 protrusions, respectively. The catalytic performance of BaTiO3/CeO2 nanoparticles was characterized by their abilities to degrade RhB in water under different external conditions (light irradiation, ultrasonic oscillation, or both). In all test groups, BaTiO3/CeO2 nanoparticles with a Ti/Ce molar ratio of 0.875 : 0.125 in the initial dried gel exhibited the strongest catalytic ability when light irradiation and ultrasonication were applied simultaneously owing to the appropriate amount of Ce3+ and oxygen vacancies.

Synergistic Effect of Y Doping and Reduction of TiO2 on the Improvement of Photocatalytic Performance

Pure TiO2 and 3% Y-doped TiO2 (3% Y-TiO2) were prepared by a one-step hydrothermal method. Reduced TiO2 (TiO2-H2) and 3% Y-TiO2 (3% Y-TiO2-H2) were obtained through the thermal conversion treatment of Ar-H2 atmosphere at 500 °C for 3 h. By systematically comparing the crystalline phase, structure, morphological features, and photocatalytic properties of 3% Y-TiO2-H2 with pure TiO2, 3% Y-TiO2, and TiO2-H2, the synergistic effect of Y doping and reduction of TiO2 was obtained. All samples show the single anatase phase, and no diffraction peak shift is observed. Compared with single-doped TiO2 and single-reduced TiO2, 3% Y-TiO2-H2 exhibits the best photocatalytic performance for the degradation of RhB, which can be totally degraded in 20 min. The improvement of photocatalytic performance was attributed to the synergistic effect of Y doping and reduction treatment. Y doping broadened the range of light absorption and reduced the charge recombination rates, and the reduction treatment caused TiO2 to be enveloped by disordered shells. The remarkable feature of reduced TiO2 by H2 is its disordered shell filled with a limited amount of oxygen vacancies (OVs) or Ti3+, which significantly reduces the Eg of TiO2 and remarkably increases the absorption of visible light. The synergistic effect of Y doping, Ti3+ species, and OVs play an important role in the improvement of photocatalytic performances. The discovery of this work provides a new perspective for the improvement of other photocatalysts by combining doping and reduction to modify traditional photocatalytic materials and further improve their performance.

Ru(bpy)32+ as a photoinduced oxidase mimic for colorimetric detection of biothiols

We have found that tris (2,2'-bipyridyl) ruthenium (II) (Ru(bpy)₃²⁺) possesses a high photo-induced oxidase-like activity and is capable of catalyzing the color reaction of 3,3',5,5'-tetramethylbenzidine (TMB) with dissolved oxygen. Ru(bpy)₃²⁺ has a catalytic constant (K_cat) that is twice as high as that of fluorescein, 170 and 275-fold higher than that of 9-mesityl-10-methyl acridine and Eosin Y, respectively. Electron spin resonance spectroscopy (ESR) and radical scavenging experiments have verified the major active radicals involved in the color reaction are •OH. A colorimetric biothiol assay has been successfully developed for the oxidase-like activity of Ru(bpy)₃²⁺ can be suppressed by sulfhydryl compounds. A linear dependence between the decrease in absorbance and the logarithm of thiol concentrations can be found ranging from 5.0 to 50 μM, with a detection limit of 1.0 μM. This work reveals a new oxidase mimic with high catalytic activity and will facilitate the utilization of this oxidase mimic in biochemical analysis.

Facile Construction of Bi2Sn2O7/g-C3N4 Heterojunction with Enhanced Photocatalytic Degradation of Norfloxacin

To mitigate antibiotic residues in the water environment, Bi2Sn2O7/g-C3N4 (BSCN) heterojunction was fabricated by a facile ultrasound-assisted hydrothermal method. The microstructure, morphology, and optical properties of Bi2Sn2O7/g-C3N4 heterojunction was studied by XRD, FTIR, XPS, SEM, TEM, UV–Vis DRS, and PL. The degradation rate of 20 mg/L norfloxacin (NOR) under visible light for 3 h was adopted as one of the indexes to evaluate the photocatalytic performance of Bi2Sn2O7/g-C3N4 heterojunction. Embellished with 20% Bi2Sn2O7 (BSO), the Bi2Sn2O7/g-C3N4 heterojunction decomposed 94% NOR in the experimental solution, which was 2.35 and 3.03 times as much as pristine g-C3N4 and bare Bi2Sn2O7, respectively. In addition, the Bi2Sn2O7/g-C3N4 heterojunction still eliminated 89% of NOR after five cycles, portending outstanding stability and cyclability of photocatalytic activity. A possible photocatalytic mechanism of Bi2Sn2O7/g-C3N4 heterojunction for NOR degradation is proposed.

FabricatingZ-scheme C-doped TiO2/rGO nanocomposites for enhanced photocatalytic NO removal

It is attractive to explore practical approaches to optimize the photodegraded NO property of TiO₂. Herein, a typicalZ-shaped heterojunction C-TiO₂/rGO composed of carbon-doped TiO₂and reductive graphene oxide (rGO) was constructed to optimize the NO removal efficiency through anin situone-pot hydrothermal process with glucose as reductant and dopant. The C-TiO₂/rGO (0.11%) composite displays a remarkable NO removal performance of 40.6% under visible light illumination. It was found that the C-TiO₂nanoparticles were tightly attached to the rGO sheets and had strong interactions with rGO, which induced a positive impact on not only the light absorption and photo-generated charge separation but also the NO adsorption and reactive oxygen species formation, resulting in boosted photodegrade NO activity. As to the photodegrade NO process over the C-TiO₂/rGO, the HO^•and O₂^•-were the dominant radicals, of which the O₂^•-radical originated from the interactions between C-TiO₂and rGO. We proposed aZ-scheme mechanism to illuminate the advanced photocatalytic activity of C-TiO₂/rGO. This work affords an approach to developing effective photocatalysts in the NO purification field.

Flower-like Bi2S3-In2S3 heterojunction for efficient solar light induced photoreduction of Cr(VI)

To develop Bi₂S₃-based heterojunction for efficient solar light induced photoreduction of Cr(VI), flower-like Bi₂S₃-In₂S₃ composites consisted of nanorods were prepared via a microwave-assisted hydrothermal route. In contrast with pure Bi₂S₃, Bi₂S₃-In₂S₃ composites exhibited the enhanced photoreduction activity while the decreased adsorption capacity for Cr(VI) removal. The best removal efficiency of 70 mg L^-1 Cr(VI) solution (99.86%) was achieved by the optimal 3-Bi₂S₃-In₂S₃ with a Bi/In molar ratio of 4:1 within 140 min. It's ascribed to the narrow band gap for strengthened visible-light response, the tight interface between Bi₂S₃ and In₂S₃ for rapid transfer and separation of charge carriers, and the enough S vacancies for highly-efficient active sites of adsorption-photoreduction. However, the long-term photo-corrosion resulted in the slightly inferior reusability of 3-Bi₂S₃-In₂S₃ under solar light irradiation after five cycles.

A critical review on strategies for improving efficiency of BaTiO3-based photocatalysts for wastewater treatment

Barium titanate (BaTiO₃) photocatalysts with perovskite structures are promising candidates for the effective removal of hazardous organic pollutants from water/wastewater owing to several advantages, including low cost, non-toxicity, high stability, environmental friendliness, favorable band positions, high oxygen vacancies, multiple crystal phases, rapid migration of charge carriers at the surface, band bending, spontaneous polarization, and easy tailoring of the sizes and morphologies. However, this high dielectric/ferroelectric material is only active in UV light (band gap: 3.2 eV), which reduces the photocatalytic degradation performance. To make barium titanate more suitable for photocatalysis, the surfaces of the powders can be modified to broaden the absorption band. In this paper, various strategies for improving photocatalysis of barium titanate for removing organic pollutants (mostly dyes and drugs) from water/wastewater are critically reviewed. They include modifying the sizes and morphologies of the particles by varying the reaction times and synthesis temperatures, doping with metals/non-metals, loading with noble metal NPs (Ag and Au), and fabrication of heterojunction photocatalysts (conventional type II and Z-scheme). The current challenges and possible future directions of BaTiO₃-based materials are also discussed. This comprehensive review is expected to advance the design of highly efficient BaTiO₃-based materials for photocatalytic applications in water/wastewater treatment.

Photoreduction properties of novel Z-scheme structured Sr0.8La0.2(Ti1-δ 4+Ti δ 3+)O3/Bi2MoO6 composites for the removal of Cr(vi)

Novel Z-scheme structured Sr0.8La0.2(Ti1-δ 4+Ti δ 3+)O3/Bi2MoO6 (LSTBM) composites were prepared via a facile two-step solvothermal method. Several characterization techniques were employed to investigate the phases, microstructures, compositions, valence states, oxygen vacancies, surface oxygen absorption, energy band structures and lifetime of photoproduced carriers. It was found that the lifetime and transfer of the photoproduced carriers of LSTBM were better than those of Bi2MoO6 (BMO) and Sr0.8La0.2(Ti1-δ 4+Ti δ 3+)O3 (LSTO). The LSTBM with a molar ratio of BMO/(LSTO + BMO) = 0.07 (denoted as LSTBM7) showed 1.9 and 3.1 times removal rates than those for BMO and LSTO, respectively. Importantly, the built-in electric field in the heterojunction of LSTBM and Ov-s, especially in Ov-s on the higher-Fermi-level side of the heterojunction, had co-played roles in prolonging the lifetime and improving the transfer of photogenerated carriers. The photoproduced e- played a dominant role in reducing Cr(vi) to Cr(iii) and the produced Cr(iii) tends to form Cr(OH)3 and adsorb onto the surface of the photocatalyst to decrease the nucleation energy. The possible reduction route for Cr(vi) to Cr(iii) over LSTBM7 was figured out. This study implies that inducing Ov-s on the higher-Fermi-level side of the Z-scheme heterojunction is a more effective route for separating the photogenerated electrons and holes and improving the transfer of photogenerated carriers.

Photocatalytic mechanism and performance of a novel wool flake-BiFeO3nanosheet-TiO2core-shell-structured composite photocatalyst

In this study, BiFeO₃(BFO) nanosheets ground from BFO particles were first incorporated with wool flakes to construct sandwich-like wool-BFO composites using the vibration-assisted ball milling technique in freezing conditions. The wool-BFO composites were then loaded with a thick layer of TiO₂nanoparticles to prepare the core-shell-structured wool-BFO-TiO₂composites using a hydrothermal synthesis process. The microstructure of the core-shell wool-BFO-TiO₂composites and its photocatalytic applications were systematically examined using a series of characterization methods. Trapping experiments and electron spin resonance spectra were also employed to judge the active radical species like superoxide radicals (·O₂^-), singlet oxygen (¹O₂), holes (h⁺), and hydroxyl radicals (·OH) using benzoquinone, furfuryl alcohol, ethylenediamine tetraacetic acid, and tert-butanol as the scavengers, respectively. The photodegradation performance of the wool-BFO-TiO₂composites was measured using more resistant methyl orange (MO) dye as the pollutant model. In comparison with the wool-TiO₂or wool-BFO composites, the superior photocatalytic properties of the wool-BFO-TiO₂composites under visible light irradiation were attributed to the presence of mesopores and macropores, the large specific surface area and intimate interface between wool-BFO composites and TiO₂nanoparticles, the coexistence of Fe³⁺, Fe²⁺, Bi³⁺, Bi^(3-x)+, Ti⁴⁺, and Ti³⁺species, and the strong visible light harvesting, thus leading to the fast separation of photogenerated electron-hole pairs. The wool-BFO-TiO₂composites could be used for the repeated photodegradation of organic pollutants and be recycled easily using a magnet. The active radical species of the wool-BFO-TiO₂composites were ·O₂^-and¹O₂rather than ·OH and h⁺, which were involved in the photodegradation of MO dye under visible light irradiation.

In2S3/BiOI composites boost visible-light photocatalytic degradation of tetracycline hydrochloride

In₂S₃/BiOI composites have potential to degrade tetracycline hydrochloride under visible light due to the synergistic effect between In₂S₃ and BiOI.

Effect of Dual-Cocatalyst Surface Modification on Photodegradation Activity, Pathway, and Mechanisms with Highly Efficient Ag/BaTiO3/MnOx

Cocatalyst surface-loading has been regarded as an effective strategy to promote solar-energy-conversion efficiency. However, the potential influence of surface modification with cocatalysts on the photodegradation pathway and the underlying mechanisms is still unclear. Herein, we have used ferroelectric BaTiO₃ as the substrate, and both the reduction cocatalyst Ag and the oxidation cocatalyst MnO_x have been successfully loaded onto BaTiO₃ simultaneously by a one-step photodeposition method as evidenced by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM). The influence of dual-cocatalyst surface-loading on photodegradation of rhodamine B has been systematically investigated for the first time. First, the dual-cocatalyst-modified BaTiO₃ outperformed over the single-cocatalyst-loaded BaTiO₃, and the photodegradation rate of Ag/BaTiO₃/MnO_x is about 3 times and 12 times as high as that of Ag/BaTiO₃ and BaTiO₃/MnO_x, respectively. The credit is given to the synergistic effect between the reduction and oxidation cocatalysts, prompting charge carrier separation and migration as verified by the transient photocurrent, electrochemical impedance, and photoluminescence (PL) spectrum investigation. Second, in addition to the boosted photodegradation activity, the photodegradation pathway is found to be altered as well when using Ag/BaTiO₃/MnO_x. High-performance liquid chromatography (HPLC) analysis indicated that a highly selective stepwise deethylation process predominates over chromophore cleavage in the Ag/BaTiO₃/MnO_x system, while it is reverse for the Ag/BaTiO₃ system. This phenomenon is attributed to the different dye molecule adsorption modes. Furthermore, the radical trapping experiment shows that holes play a major role in the degradation process, and the recycle test proves the excellent stability of Ag/BaTiO₃/MnO_x. Our findings may add another layer of understanding depth to cocatalyst surface modification in photodegradation applications.