Iron-Catalyzed sp3 C-H Alkylation of Fluorene with Primary and Secondary Alcohols: A Borrowing Hydrogen Approach

The utilization of earth-abundant, cheap, and nontoxic transition metals in important catalytic transformations is essential for sustainable development, and iron has gained significant attention as the most abundant transition metal. A mixture of FeCl2 (3 mol %), phenanthroline (6 mol %), and KOtBu (0.4 eqivalent) was used as an effective catalyst for the sp3 C-H alkylation of fluorene using alcohol as a nonhazardous alkylating partner, and eco-friendly water was formed as the only byproduct. The substrate scope includes a wide range of substituted fluorenes and substituted benzyl alcohols. The reaction is equally effective with challenging secondary alcohols and unactivated aliphatic alcohols. Selective mono-C9-alkylation of fluorenes with alcohols yielded the corresponding products in good isolated yields. Various postfunctionalizations of C-9 alkylated fluorene products were performed to establish the practical utility of this catalytic alkylation. Control experiments suggested a homogeneous reaction path involving borrowing hydrogen mechanism with the formation and subsequent reduction of 9-alkylidene fluorene intermediate.

Iron- and base-catalyzed C(α)-alkylation and one-pot sequential alkylation-hydroxylation of oxindoles with secondary alcohols

The utilization of economical and environmentally benign transition metals in crucial catalytic processes is pivotal for sustainable advancement in synthetic organic chemistry. Iron, as the most abundant transition metal in the Earth's crust, has gained significant attention for this purpose. A combination of FeCl2 (5 mol%) in the presence of phenanthroline (10 mol%) and NaOtBu (1.5 equivalent) proved effective for the C(α)-alkylation of oxindole, employing challenging secondary alcohol as a non-hazardous alkylating agent. The C(α)-alkylation of oxindole was optimized in green solvent or under neat conditions. The substrate scope encompasses a broad array of substituted oxindoles with various secondary alcohols. Further post-functionalization of the C(α)-alkylated oxindole products demonstrated the practical utility of this catalytic alkylation. One-pot C-H hydroxylation of alkylated oxindoles yielded 3-alkyl-3-hydroxy-2-oxindoles using air as the most sustainable oxidant. Low E-factors (3.61 to 4.19) and good Eco-scale scores (74 to 76) of these sustainable catalytic protocols for the alkylation and one-pot sequential alkylation-hydroxylation of oxindoles demonstrated minimum waste generation. Plausible catalytic paths are proposed on the basis of past reports and control experiments, which suggested that a borrowing hydrogen pathway is involved in this alkylation.

Mn-Catalyzed Ligand-Free One-Pot Synthesis of (E)-6,7-Dihydrodibenzo[b,j][1,7]phenanthrolines and (E)-1,2,3,4-Tetrahydrobenzo[b][1,6]naphthyridines through Dehydrogenative Friedlander Annulation/C(sp3)-H Functionalization

An efficient, MnO2-catalyzed ligand-free synthesis of (E)-6,7-dihydrodibenzo[b,j][1,7]phenanthrolines, 13, and (E)-1,2,3,4-tetrahydrobenzo[b][1,6]naphthyridines, 15, utilizing, 2-amino-5-chloro-benzhydrol, 9, acridinol, 10, or 1-benzyl-4-piperidinol, 14, and benzyl alcohols, 11, is reported. The MnO2-catalyzed dehydrogenative Friedlander annulation utilizing ChCl/p-TSA (DES-1) and subsequent C(sp3)-H functionalization with TBAB/p-TSA (DES-2) was effected at 100 °C. The optimized reaction conditions gave excellent product yields, and the products were evaluated for their by UV absorption and fluorescence emission studies.

Harnessing alcohols as sustainable reagents for late-stage functionalisation: synthesis of drugs and bio-inspired compounds

Alcohol is ubiquitous with unparalleled structural diversity and thus has wide applications as a native functional group in organic synthesis. It is highly prevalent among biomolecules and offers promising opportunities for the development of chemical libraries. Over the last decade, alcohol has been extensively used as an environmentally friendly chemical for numerous organic transformations. In this review, we collectively discuss the utilisation of alcohol from 2015 to 2023 in various organic transformations and their application toward intermediates of drugs, drug derivatives and natural product-like molecules. Notable features discussed are as follows: (i) sustainable approaches for C-X alkylation (X = C, N, or O) including O-phosphorylation of alcohols, (ii) newer strategies using methanol as a methylating reagent, (iii) allylation of alkenes and alkynes including allylic trifluoromethylations, (iv) alkenylation of N-heterocycles, ketones, sulfones, and ylides towards the synthesis of drug-like molecules, (v) cyclisation and annulation to pharmaceutically active molecules, and (vi) coupling of alcohols with aryl halides or triflates, aryl cyanide and olefins to access drug-like molecules. We summarise the synthesis of over 100 drugs via several approaches, where alcohol was used as one of the potential coupling partners. Additionally, a library of molecules consisting over 60 fatty acids or steroid motifs is documented for late-stage functionalisation including the challenges and opportunities for harnessing alcohols as renewable resources.

Pincer Nickel-Catalyzed Olefination of Alcohols with Benzylphosphine Oxides

N,N,P-Pincer nickel complexes effectively catalyze reaction of alcohols with benzylphosphine oxides to form alkenes in good yields. The protocol suits for a wide scope of substrates and generates only E-configurated alkenes. The method also shows good compatibility of functional groups. Methoxy, methylthio, trifluoromethyl, ketal, fluoro, chloro, bromo, thienyl, and furyl groups are tolerated. The mechanism studies support that the reaction proceeds through catalytic dehydrogenation of alcohols to aldehydes or ketones followed by condensation with benzyldiphenylphosphine oxides in the presence of KOtBu.

Recent advances in cross-coupling of alcohols via borrowing hydrogen catalysis

Application of the borrowing hydrogen strategy facilitates utilization of abundantly available alcohols for linear or branched long-chain alcohols. Selective synthesis of such alcohols is highly challenging and involves the utilization of transition metal catalysts towards the desired cross-coupled product. Herein, we have highlighted recent advances (from 2015 to 2023) towards the synthesis of higher alcohols. Major focus has been given to the development of ligands, including transition metal catalysts. Judicious catalyst design plays a key role in the alkylation process and is summarised in this review.

Recent advances in the selective semi-hydrogenation of alkyne to (E)-olefins

Considering the potential importance and upsurge in demand, the selective semi-hydrogenation of alkynes to (E)-olefins has attracted significant interest. This article highlights the recent advances in newer technologies and important methodologies directed to (E)-olefins from alkynes developed from 2015 to 2023. Notable features summarised include the catalyst or ligand design and control of product selectivity based on precious and nonprecious metal catalysts for semi-hydrogenation to (E)-olefins. Mechanistic studies for various catalytic transformations, including synthetic application to bioactive compounds, are summarised.

Well-Defined Mn(II)-complex Catalyzed Switchable De(hydrogenative) Csp3 -H Functionalization of Methyl Heteroarenes: A Sustainable Approach for Diversification of Heterocyclic Motifs

Catalytic activities of Mn(I) complexes derived from expensive MnBr(CO)5 salt have been explored in various dehydrogenative transformations. However, the reactivity and selectivity of inexpensive high spin Mn(II) complexes are uncommon. Herein, we have synthesized four new Mn(II) complexes and explored switchable alkenylation and alkylation of methyl heteroarenes employing a single Mn(II)catalyst. The developed protocol selectively furnishes a series of functionalized E-heteroarenes and C-alkylated heteroarenes with good to excellent yields. Various medicinally and synthetically useful compounds are successfully synthesized using our developed protocol. Various controls and kinetics experiments were executed to shed light on the mechaism,which reveals that α-C-H bond breaking of alcohol is the slowest step.

Synthesis and spectroscopic and structural characterization of three new 2-methyl-4-styrylquinolines formed using Friedländer reactions between (2-aminophenyl)chalcones and acetone

Three new 2-methyl-4-styrylquinoline derivatives have been synthesized in high yields using Friedländer reactions between chalcones [1-(2-aminophenyl)-3-arylprop-2-en-1-ones] and acetone, and characterized using IR, 1H and 13C NMR spectroscopy, and mass spectrometry, and by crystal structure analysis. In (E)-4-(4-fluorostyryl)-2-methylquinoline, C18H14FN, (I), the molecules are joined into cyclic centrosymmetric dimers by C-H...N hydrogen bonds and these dimers are linked into sheets by π-π stacking interactions. The molecules of (E)-2-methyl-4-[4-(trifluoromethyl)styryl]quinoline, C19H14F3N, (II), are linked into cyclic centrosymmetric dimers by C-H...π hydrogen bonds and these dimers are linked into chains by a single π-π stacking interaction. There are no significant hydrogen bonds in the structure of (E)-4-(2,6-dichlorostyryl)-2-methylquinoline, C18H13Cl2N, (III), but molecules related by translation along [010] form stacks with an intermolecular spacing of only 3.8628 (2) Å. Comparisons are made with the structures of some related compounds.

Interception of Nickel Hydride Species and Its Application in Multicomponent Reactions

The hydrogen borrowing strategy is an economical method for the α-functionalization of ketones. While this strategy is extremely advantageous, it does not lend itself to the synthesis of β,β-disubstituted ketones. This can be achieved, if the in situ generated metal hydride can be intercepted with a nucleophilic coupling partner. We present a multicomponent strategy for the coupling of alcohols, ketones, and boronic acids using only 1 mol % nickel catalyst and without the need for added ligands.

Nickel-Catalyzed 1,1-Dihydrophosphinylation of Nitriles with Phosphine Oxides

Treatment of phosphine oxides with nitriles usually furnishes 1,2-dihydrophosphinylation products. Herein, we developed a nickel-catalyzed 1,1-dihydrophosphinylation of nitriles with phosphine oxides to access primary amines. This reaction proceeded smoothly under very mild conditions. A series of nitriles and phosphine oxides were compatible with this conversion, and the desired products were obtained in moderate to good yields.

Metal-free, one-pot synthesis of 2-styrylquinolines via Friedländer annulation and sp3 C–H activation using 1,3-dimethylurea and l-tartaric acid (3 : 1) as a deep eutectic solvent

Functionalized 2-styrylquinolines are prepared using DMU + l-(+)-tartaric acid as deep eutectic solvent. DFT calculations supported the experimental results on role of DES as catalyst. The absorption-emission spectra indicating that these compounds can be useful as fluorescent probes.

Recent advances on non-precious metal-catalyzed C-H functionalization of N-heteroarenes

N-Heteroarenes are widely used for numerous medicinal applications, lifesaving drugs and show utmost importance as intermediates in chemical synthesis. This feature article highlights the recent advances, from 2015 to August 2021, on sp² and sp³ C-H bond functionalization reactions of various N-heteroarenes catalyzed by non-precious transition metals (Mn, Co, Fe, Ni, etc.). The salient features of the report are: (i) the development of newer catalysis for Csp²-H activation of N-heteroarenes and categorized into alkylation, alkenylation, borylation, cyanation, and annulation reactions, (ii) recent advances on Csp³-H bond functionalization of N-heteroarenes considering newer approaches for alkylation as well as alkenylation processes, and (iii) synthetic applications and practical utility of the catalytic protocols utilized for late-stage drug development; (iv) scope for the development of newer catalytic protocols along with mechanistic studies and detail mechanistic findings of various important processes.

Recent advances in nickel-catalyzed C-C and C-N bond formation via HA and ADC reactions

In recent times, earth-abundant 3d-transition-metal catalysts have attracted much attention in contemporary catalysis. They have been widely employed as suitable alternatives to their counterparts noble metals. In particular, nickel catalysts provide distinctive redox properties; thus, their efficiency in sustainable organic transformations is manifold. In this review article, recent advances in nickel-catalyzed hydrogen auto-transfer (HA) and acceptorless dehydrogenative coupling (ADC) reactions for the construction of C-C and C-N bonds have been discussed.

NaCl as Catalyst and Water as Solvent: Highly E-Selective Olefination of Methyl Substituted N-Heteroarenes with Benzyl Amines and Alcohols

Oxidative coupling of benzylamines and alcohols with methyl substituted N-heteroarenes such as quinolines and quinoxalines has been achieved using chloride, a sea abundant anion as the catalyst for practical synthesis of a wide range of E-disubstituted olefins in aqueous medium. Detailed mechanistic studies and control experiments were carried out to deduce the reaction mechanism which indicated that in situ formed ClO₂^- is the active form of the catalyst. We have successfully carried out a 1 g scale reaction using this methodology, and five pharmaceutically relevant conjugated olefins were also synthesized by this method in moderate to good yields.

Iron-catalysed alkylation of 2-methyl and 4-methyl azaarenes with alcohols via C-H bond activation

The first Fe-catalysed alkylation of 2-methyl and 4-methyl-azaarenes with a series of alkyl and hetero-aryl alcohols is reported (>39 examples and up to 95% yield). Multi-functionalisation of pyrazines and synthesis of anti-malarial drug (±) Angustureine significantly broaden the scope of this methodology. Preliminary mechanistic investigation, deuterium labeling and kinetic experiments including trapping of the enamine intermediate 1a' are of special importance.

A Simple Iron-Catalyst for Alkenylation of Ketones Using Primary Alcohols

Herein, we developed a simple iron-catalyzed system for the α-alkenylation of ketones using primary alcohols. Such acceptor-less dehydrogenative coupling (ADC) of alcohols resulted in the synthesis of a series of important α,β-unsaturated functionalized ketones, having aryl, heteroaryl, alkyl, nitro, nitrile and trifluoro-methyl, as well as halogen moieties, with excellent yields and selectivity. Initial mechanistic studies, including deuterium labeling experiments, determination of rate and order of the reaction, and quantitative determination of H₂ gas, were performed. The overall transformations produce water and dihydrogen as byproducts.