Directed ortho-metalation-nucleophilic acyl substitution strategies in deep eutectic solvents: the organolithium base dictates the chemoselectivity

Harnessing Deep Eutectic Solvents for Regioselective Polar Additions to α, β Unsaturated Ketones and Aldehydes

Advancing the use of air-sensitive polar organometallic Grignard and organolithium reagents under more environmentally benign conditions, here we report the addition of these reagents to α,β-unsaturated ketones and aldehydes using the deep eutectic solvent (DES) choline chloride (ChCl): glycerol (Gly) (1 : 2), under air. Reactions occur at room temperature within seconds with excellent regioselective control. Furthering understanding of how these C-C bond forming processes take place in these reaction media, we have explored the surface concentration of the organic substrate (chalcone) in DES using interfacial tension and neutron reflectivity measurements, finding that chalcone is concentrated at the DES-hydrocarbon interface compared to the bulk concentration, although the interfacial chalcone concentration is still relatively low in this system. The influence of aggregation of the organometallic reagent in the organic solvent employed has also been evaluated, revealing the importance of achieving a balance between activation (via de-aggregation) and stability (to avoid its decomposition in the DES). This DES approach has been successfully extended to double additions to α,β-unsaturated esters and for one pot sequential 1,4 and 1,2 additions to ketones, providing a new entry point to a range of tertiary-alcohols, minimising the use of organic solvents and avoiding intermediate time-consuming purification steps.

Divergent alkynylative difunctionalization of amide bonds through C-O deoxygenation versus C-N deamination

The transformation and utilization of amides are significant in organic synthesis and drug discovery. Here we demonstrate a divergent alkynylative difunctionalization of amides in a single transformation. In this reaction, amides react with an organometallic nucleophile to form a tetrahedral intermediate. By altering the N-substitution or the acyl group, the tetrahedral intermediate species selectively undergoes C-O or C-N cleavage with a concomitant capture by an alkynyl nucleophile generated in situ. This process enables the selective introduction of two different functional groups into the amide molecular architecture, producing valuable propargyl amine and propargyl alcohol products. The selectivity between deoxygenation and deamination process has been further elucidated by DFT calculations. Overall, this reaction successfully transforms the traditional mode of nucleophilic acyl addition to amides to a divergent C-O/C-N cleavage. The particularly wide substrate scope, including late-stage modification of bioactive molecules, demonstrates its potential broad applications in organic synthesis.

Wittig Reaction in Deep Eutectic Solvents: Expanding the DES Toolbox in Synthesis

Wittig reaction between substituted phosphonium salts and (hetero)aromatic and alkyl carbonyl compounds in Deep Eutectic Solvents has been developed under a scalable and friendly protocol. Highly efficient reactions were successfully run with a wide range of bases including organic (DBU, LiTMP, t-BuOK) and inorganic (NaOH, K2CO3) ones in ChCl/Gly 1 : 2 (mol/mol) as solvent under mild conditions, at room temperature and under air. The proposed protocol was applied to a wide range of substrates, including (hetero)aromatic aldehydes with substituents as halogens (I, Br, Cl), EDG (alkoxy, methyl), EWG (NO2, CF3) or reactive groups as CN, esters, and ketones. Vinylic, alkynyl and cycloalkyl, alicyclic and α,β-unsaturated aldehydes can also be used. Highly electrophilic ketones gave good yields. The diastereoselectivity of the reaction is in complete agreement with the E/Z ratio predictable under traditional conditions. We demonstrated that the protocol is scalable to 2 g (5 mmol) of phosphonium salt, furthermore the proposed workup protocol allows to remove TPPO without need of additional chromatographic purification.

Recent Advancements in the Utilization of s-Block Organometallic Reagents in Organic Synthesis with Sustainable Solvents

This mini-review offers a comprehensive overview of the advancements made over the last three years in utilizing highly polar s-block organometallic reagents (specifically, RLi, RNa and RMgX compounds) in organic synthesis run under bench-type reaction conditions. These conditions involve exposure to air/moisture and are carried out at room temperature, with the use of sustainable solvents as reaction media. In the examples provided, the adoption of Deep Eutectic Solvents (DESs) or even water as non-conventional and protic reaction media has not only replicated the traditional chemistry of these organometallic reagents in conventional and toxic volatile organic compounds under Schlenk-type reaction conditions (typically involving low temperatures of -78 °C to 0 °C and a protective atmosphere of N2 or Ar), but has also resulted in higher conversions and selectivities within remarkably short reaction times (measured in s/min). Furthermore, the application of the aforementioned polar organometallics under bench-type reaction conditions (at room temperature/under air) has been extended to other environmentally responsible reaction media, such as more sustainable ethereal solvents (e.g., CPME or 2-MeTHF). Notably, this innovative approach contributes to enhancing the overall sustainability of s-block-metal-mediated organic processes, thereby aligning with several key principles of Green Chemistry.

Asymmetric Reduction of Cyclic Imines by Imine Reductase Enzymes in Non-Conventional Solvents

The first enantioselective reduction of 2-substituted cyclic imines to the corresponding amines (pyrrolidines, piperidines, and azepines) by imine reductases (IREDs) in non-conventional solvents is reported. The best results were obtained in a glycerol/phosphate buffer 1 : 1 mixture, in which heterocyclic amines were produced with full conversions (>99 %), moderate to good yields (22-84 %) and excellent S-enantioselectivities (up to >99 % ee). Remarkably, the process can be performed at a 100 mM substrate loading, which, for the model compound, means a concentration of 14.5 g L-1 . A fed-batch protocol was also developed for a convenient scale-up transformation, and one millimole of substrate 1 a was readily converted into 120 mg of enantiopure amine (S)-2 a with a remarkable 80 % overall yield. This aspect strongly contributes to making the process potentially attractive for large-scale applications in terms of economic and environmental sustainability for a good number of substrates used to produce enantiopure cyclic amines of high pharmaceutical interest.

Sustainable and practical formation of carbon-carbon and carbon-heteroatom bonds employing organo-alkali metal reagents

Metal-catalysed cross-coupling reactions are amongst the most widely used methods to directly construct new bonds. In this connection, sustainable and practical protocols, especially transition metal-catalysed cross-coupling reactions, have become the focus in many aspects of synthetic chemistry due to their high efficiency and atom economy. This review summarises recent advances from 2012 to 2022 in the formation of carbon-carbon bonds and carbon-heteroatom bonds by employing organo-alkali metal reagents.

A Mild, Efficient and Sustainable Tetrahydropyranylation of Alcohols Promoted by Acidic Natural Deep Eutectic Solvents

A straightforward protocol to promote the tetrahydropyranylation of alcohols, using for the first time bioinspired acidic natural deep eutectic solvents (NADESs) as non-innocent reaction media under mild reaction conditions, was reported. This approach enables the preparation of several tetrahydropyranyl (THP) ethers starting from primary, secondary and tertiary alcohols in short reaction times and with high levels of chemoselectivity, working under air and without the need of additional catalyst. The sustainability of the methodology was further highlighted by its scalability and the easy recyclability of the NADES, allowing multigram preparations of THP ethers without any loss of the catalytic activity of the reaction media up to ten recycling steps. Telescoped, one-pot tetrahydropyranylation/nucleophilic acyl substitution transformations using the same eutectic mixture were also demonstrated.

Design of a New Chiral Deep Eutectic Solvent Based on 3-Amino-1,2-propanediol and Its Application in Organolithium Chemistry

A chiral glycerol derivative, namely 3-amino-1,2-propanediol, was employed for as the hydrogen bond donor (HBD) in the design of a new deep eutectic solvent (DES) with choline chloride acting as the hydrogen bond acceptor (HBA). The novel mixture was characterized and unambiguously classified as a DES. Furthermore, its synthetic usefulness was demonstrated in the room-temperature n-butyllithium-addition under air to carbonyl compounds and benzyl chloride. In some cases, pure products (100% conversion) were obtained by a simple extractive work-up in up to 72% isolated yield, thus suggesting the potential practical usefulness of this procedure as a green alternative to the classical Schenk procedure in volatile organic solvents for the synthesis of tertiary alcohols. The chirality of the HBD, bearing an interesting basic primary amino group, is an intriguing feature currently under investigation for further exploitation.

Deep Eutectic Solvents as à-la-Carte Medium for Transition-Metal-Catalyzed Organic Processes

Our society is facing a tremendous challenge to become more sustainable in every sphere of life. Regarding the chemical industry, one of the most significant issues to be addressed is the use of volatile organic compounds (VOCs) as solvents because they are petrol-derived and most of them are toxic and flammable. Among the possible solutions, deep eutectic solvents (DESs) have emerged as sustainable alternatives to VOCs in organic catalyzed transformations and other fields. The advantages of these new reaction media are not only related to their more benign physical and chemical properties and, for most of them, their renewable sources but also due to the possibility of being recycled after their use, increasing the sustainability of the catalyzed process in which they are involved. However, their use as media in catalytic transformations introduces new challenges regarding the compatibility and activity of known catalysts. Therefore, designed catalysts and "à-la-carte" DESs systems have been developed to overcome this problem, to maximize the reaction outcomes and to allow the recyclability of the catalyst/media system. Over the last decade, the popularity of these solvents has steadily increased, with several examples of efficient metal-catalyzed organic transformations, showing the efficiency of the catalysts/DES system, compared to the related transformations carried out in VOCs. Additionally, due to the inherent properties of the DES, unknown transformations can be carried out using the appropriated catalyst/DES system. All these examples of sustainable catalytic processes are compiled in this review.

Aerobic/Room-Temperature-Compatible s-Block Organometallic Chemistry in Neat Conditions: A Missing Synthetic Tool for the Selective Conversion of Nitriles into Asymmetric Alcohols

Highly-efficient and selective one-pot/two-step modular double addition of different highly polar organometallic reagents (RLi/RMgX) to nitriles en route to asymmetric tertiary alcohols (without the need for isolation/purification of any halfway reaction intermediate) has been studied, for the first time, in the absence of external/additional organic solvents (neat conditions), at room temperature and under air/moisture (no protecting atmosphere is required), which are generally forbidden reaction conditions in the field of highly-reactive organolithium/organomagnesium reagents. The one-pot modular tandem protocol demonstrated high chemoselectivity with a broad range of nitriles, as no side reactions (Li/halogen exchange, ortho-lithiations or benzylic metalations) were detected. Finally, this protocol could be scaled up, thus proving that this environmentally friendly methodology is amenable for a possible applied synthesis of asymmetric tertiary alcohols under bench type reaction conditions and in the absence of external organic solvents.

Selective Aerobic Oxidation of Alcohols in Low Melting Mixtures and Water and Use for Telescoped One-Pot Hybrid Reactions

An efficient, selective and sustainable protocol was developed for the CuCl2 /TEMPO/TMEDA-catalyzed aerobic oxidation of activated alcohols to the corresponding carbonyl compounds using water or the environmentally friendly low melting mixture (LMM) d-fructose-urea as the reaction medium. Such oxidation reactions proceed under mild (room temperature or 40 °C) and aerobic conditions, with the carbonyl derivatives isolated in up to 98 % yield and within 4 h reaction time when using the above-mentioned LMM. The potential application of this methodology is demonstrated by setting up useful telescoped, one-pot two-step hybrid transformations for the direct conversion of primary alcohols either into secondary alcohols or into valuable nitroalkenes, by combining oxidation processes with nucleophilic additions promoted by highly polarized organometallic compounds (Grignard and organolithium reagents) or with nitroaldol (Henry) reactions, respectively.

Deep Eutectic Solvents in Solar Energy Technologies

Deep Eutectic Solvents (DESs) have been widely used in many fields to exploit their ecofriendly characteristics, from green synthetic procedures to environmentally benign industrial methods. In contrast, their application in emerging solar technologies, where the abundant and clean solar energy is used to properly respond to most important societal needs, is still relatively scarce. This represents a strong limitation since many solar devices make use of polluting or toxic components, thus seriously hampering their eco-friendly nature. Herein, we review the literature, mainly published in the last few years, on the use of DESs in representative solar technologies, from solar plants to last generation photovoltaics, featuring not only their passive role as green solvents, but also their active behavior arising from their peculiar chemical nature. This collection highlights the increasing and valuable role played by DESs in solar technologies, in the fulfillment of green chemistry requirements and for performance enhancement, in particular in terms of long-term temporal stability.

Ligand-Free Copper-Catalyzed Ullmann-Type C-O Bond Formation in Non-Innocent Deep Eutectic Solvents under Aerobic Conditions

An efficient and novel protocol was developed for a Cu-catalyzed Ullmann-type aryl alkyl ether synthesis by reacting various (hetero)aryl halides (Cl, Br, I) with alcohols as active components of environmentally benign choline chloride-based eutectic mixtures. Under optimized conditions, the reaction proceeded under mild conditions (80 °C) in air, in the absence of additional ligands, with a catalyst [CuI or CuII species] loading up to 5 mol% and K2 CO3 as the base, providing the desired aryloxy derivatives in up to 98 % yield. The potential application of the methodology was demonstrated in the valorization of cheap, easily available, and naturally occurring polyols (e. g., glycerol) for the synthesis of some pharmacologically active aryloxypropanediols (Guaiphenesin, Mephenesin, and Chlorphenesin) on a 2 g scale in 70-96 % yield. Catalyst, base, and deep eutectic solvent could easily and successfully be recycled up to seven times with an E-factor as low as 5.76.

A one-pot two-step synthesis of tertiary alcohols combining the biocatalytic laccase/TEMPO oxidation system with organolithium reagents in aerobic aqueous media at room temperature

The one-pot/two-step combination of enzymes and polar organometallic chemistry in aqueous media is for the first time presented as a proof-of-concept study. The unprecedented combination of the catalytic oxidation of secondary alcohols by the system laccase/TEMPO with the ultrafast addition (3 s reaction time) of polar organometallic reagents (RLi/RMgX) to the in situ formed ketones, run under air at room temperature, allows the straightforward and chemoselective synthesis of tertiary alcohols with broad substrate scope and excellent conversions (up to 96%).

Continuous Flow Acylation of (Hetero)aryllithiums with Polyfunctional N,N-Dimethylamides and Tetramethylurea in Toluene

The continuous flow reaction of various aryl or heteroaryl bromides in toluene in the presence of THF (1.0 equiv) with sec -BuLi (1.1 equiv) provided at 25 °C within 40 sec the corresponding aryllithiums which were acylated with various functionalized N,N-dimethylamides including easily enolizable amides at -20 °C within 27 sec, producing highly functionalized ketones in 48-90% yield (36 examples). This method was well suited for the preparation of α-chiral ketones such as naproxene and ibuprofen derived ketones with 99% ee . A one-pot stepwise bis-addition of two different lithium organometallics to 1,1,3,3-tetramethyurea (TMU) provided unsymmetrical ketones in 69-79% yield (9 examples).

Promising Technological and Industrial Applications of Deep Eutectic Systems

Deep Eutectic Systems (DESs) are obtained by combining Hydrogen Bond Acceptors (HBAs) and Hydrogen Bond Donors (HBDs) in specific molar ratios. Since their first appearance in the literature in 2003, they have shown a wide range of applications, ranging from the selective extraction of biomass or metals to medicine, as well as from pollution control systems to catalytic active solvents and co-solvents. The very peculiar physical properties of DESs, such as the elevated density and viscosity, reduced conductivity, improved solvent ability and a peculiar optical behavior, can be exploited for engineering modular systems which cannot be obtained with other non-eutectic mixtures. In the present review, selected DESs research fields, as their use in materials synthesis, as solvents for volatile organic compounds, as ingredients in pharmaceutical formulations and as active solvents and cosolvents in organic synthesis, are reported and discussed in terms of application and future perspectives.

Fast Addition of s-Block Organometallic Reagents to CO2 -Derived Cyclic Carbonates at Room Temperature, Under Air, and in 2-Methyltetrahydrofuran

Fast addition of highly polar organometallic reagents (RMgX/RLi) to cyclic carbonates (derived from CO₂ as a sustainable C1 synthon) has been studied in 2-methyltetrahydrofuran as a green reaction medium or in the absence of external volatile organic solvents, at room temperature, and in the presence of air/moisture. These reaction conditions are generally forbidden with these highly reactive main-group organometallic compounds. The correct stoichiometry and nature of the polar organometallic alkylating or arylating reagent allows straightforward synthesis of: highly substituted tertiary alcohols, β-hydroxy esters, or symmetric ketones, working always under air and at room temperature. Finally, an unprecedented one-pot/two-step hybrid protocol is developed through combination of an Al-catalyzed cycloaddition of CO₂ and propylene oxide with the concomitant fast addition of RLi reagents to the in situ and transiently formed cyclic carbonate, thus allowing indirect conversion of CO₂ into the desired highly substituted tertiary alcohols without need for isolation or purification of any reaction intermediates.

Alkali-Metal Mediation: Diversity of Applications in Main-Group Organometallic Chemistry

Organolithium compounds have been at the forefront of synthetic chemistry for over a century, as they mediate the synthesis of myriads of compounds that are utilised worldwide in academic and industrial settings. For that reason, lithium has always been the most important alkali metal in organometallic chemistry. Today, that importance is being seriously challenged by sodium and potassium, as the alkali-metal mediation of organic reactions in general has started branching off in several new directions. Recent examples covering main-group homogeneous catalysis, stoichiometric organic synthesis, low-valent main-group metal chemistry, polymerization, and green chemistry are showcased in this Review. Since alkali-metal compounds are often not the end products of these applications, their roles are rarely given top billing. Thus, this Review has been written to alert the community to this rising unifying phenomenon of "alkali-metal mediation".

Copper-catalyzed Goldberg-type C-N coupling in deep eutectic solvents (DESs) and water under aerobic conditions

An efficient and selective N-functionalization of amides is first reported via a CuI-catalyzed Goldberg-type C-N coupling reaction between aryl iodides and primary/secondary amides run either in Deep Eutectic Solvents (DESs) or water as sustainable reaction media, under mild and bench-type reaction conditions (absence of protecting atmosphere). Higher activities were observed in an aqueous medium, though the employment of DESs expanded and improved the scope of the reaction to include also aliphatic amides. Additional valuable features of the reported protocol include: (i) the possibility to scale up the reaction without any erosion of the yield/reaction time; (ii) the recyclability of both the catalyst and the eutectic solvent up to 4 consecutive runs; and (iii) the feasibility of the proposed catalytic system for the synthesis of biologically active molecules.

Facile Access to Hetero-poly-functional Arenes and meta-Substituted Arenes via Two-Step Dimetalation and Mg/Halogen-Exchange Protocol

The Grignard reagent, iPrMgCl and its lithium chloride-enhanced 'turbo' derivative iPrMgCl⋅LiCl have been employed to investigate the single iodo/magnesium exchange reactions of the trisubstituted arenes, 2,5-diiodo-N,N-diisopropylbenzamide 1, 1,4-diiodo-2-methoxybenzene 2, and 1,4-diiodo-2-(trifluoromethyl)benzene 3. These three arenes themselves were initially prepared by a double ortho-, meta'-deprotonation of N,N-diisopropylbenzamide, anisole and (trifluoromethyl)benzene, respectively, using the sodium magnesiate reagent [Na₄ Mg₂ (TMP)₆ (nBu)₂ ] (where TMP is 2,2,6,6-tetramethylpiperidide), and subsequent electrophilic quenching with iodine/THF solution. Thus, by following a combined deprotonation and magnesium/halogen exchange strategy, the simple monosubstituted arenes can be converted to trisubstituted diiodoarenes, which can ultimately be transformed into the corresponding mono-magnesiated arenes, in THF at -40 °C, within seconds in good yields. The other functional group (OMe, NiPr₂ or CF₃ respectively) present on the di-iodoarenes helps direct the exchange reaction to the ortho position, whereas subsequent addition of different electrophiles permits the preparation of hetero-poly-functional-arenes, with three different substituents in their structure. Intriguingly, if water is used as the electrophile, a new and facile route to prepare meta-substituted arenes, which cannot be easily obtained by conventional processes, is forthcoming. In contrast to directed ortho-metalation (DoM) chemistry, this reaction sequence can be thought of as InDirect meta-Metalation (IDmM). The scope of the chemistry has been tested further by exposing the initial unreacted iodo-functionality at the meta-position to a second Mg/I-exchange reaction and subsequent functionalization.

A Fast and General Route to Ketones from Amides and Organolithium Compounds under Aerobic Conditions: Synthetic and Mechanistic Aspects

We report that the nucleophilic acyl substitution reaction of aliphatic and (hetero)aromatic amides by organolithium reagents proceeds quickly (20 s reaction time), efficiently, and chemoselectively with a broad substrate scope in the environmentally responsible cyclopentyl methyl ether, at ambient temperature and under air, to provide ketones in up to 93 % yield with an effective suppression of the notorious over-addition reaction. Detailed DFT calculations and NMR investigations support the experimental results. The described methodology was proven to be amenable to scale-up and recyclability protocols. Contrasting classical procedures carried out under inert atmospheres, this work lays the foundation for a profound paradigm shift of the reactivity of carboxylic acid amides with organolithiums, with ketones being straightforwardly obtained by simply combining the reagents under aerobic conditions and with no need of using previously modified or pre-activated amides, as recommended.

Advances in deep eutectic solvents and water: applications in metal- and biocatalyzed processes, in the synthesis of APIs, and other biologically active compounds

This review highlights recent advances in metal- and biocatalyzed transformations, in the synthesis of APIs and other biologically active compounds, when employing deep eutectic solvents and water as environmentally responsible solvents.

Optimization of Nazarov Cyclization of 2,4-Dimethyl-1,5-diphenylpenta-1,4-dien-3-one in Deep Eutectic Solvents by a Design of Experiments Approach

The unprecedented Nazarov cyclization of a model divinyl ketone using phosphonium-based Deep Eutectic Solvents as sustainable non-innocent reaction media is described. A two-level full factorial Design of Experiments was conducted for elucidating the effect of the components of the eutectic mixture and optimizing the reaction conditions in terms of temperature, time, and substrate concentration. In the presence of the Deep Eutectic Solvent (DES) triphenylmethylphosphonium bromide/ethylene glycol, it was possible to convert more than 80% of the 2,4-dimethyl-1,5-diphenylpenta-1,4-dien-3-one, with a specific conversion, into the cyclopentenone Nazarov derivative of 62% (16 h, 60 °C). For the reactions conducted in the DES triphenylmethylphosphonium bromide/acetic acid, quantitative conversions were obtained with percentages of the Nazarov product above 95% even at 25 °C. Surface Responding Analysis of the optimized data furnished a useful tool to determine the best operating conditions leading to quantitative conversion of the starting material, with complete suppression of undesired side-reactions, high yields and selectivity. After optimization, it was possible to convert more than 90% of the model substrate into the desired cyclopentenone with cis percentages up to 77%. Experimental validation of the implemented model confirmed the robustness and the suitability of the procedure, leading to possible further extension to this specific combination of experimental designs to other substrates or even to other synthetic processes of industrial interest.

Fast and Chemoselective Addition of Highly Polarized Lithium Phosphides Generated in Deep Eutectic Solvents to Aldehydes and Epoxides

Highly polarized lithium phosphides (LiPR₂ ) were synthesized, for the first time, in deep eutectic solvents as sustainable reaction media, at room temperature and in the absence of protecting atmosphere, through direct deprotonation of both aliphatic and aromatic secondary phosphines (HPR₂ ) by n-BuLi. The subsequent addition of in-situ generated LiPR₂ to aldehydes or epoxides proceeded quickly and chemoselectively, thereby allowing the straightforward access to the corresponding α- or β-hydroxy phosphine oxides, respectively, under air and at room temperature (bench conditions), which are traditionally considered as textbook-prohibited conditions in the field of polar organometallic chemistry of s-block elements.

Regiodivergent synthesis of functionalized pyrimidines and imidazoles through phenacyl azides in deep eutectic solvents

We report that phenacyl azides are key compounds for a regiodivergent synthesis of valuable, functionalized imidazole (32–98% yield) and pyrimidine derivatives (45–88% yield), with a broad substrate scope, when using deep eutectic solvents [choline chloride (ChCl)/glycerol (1:2 mol/mol) and ChCl/urea (1:2 mol/mol)] as environmentally benign and non-innocent reaction media, by modulating the temperature (25 or 80 °C) in the presence or absence of bases (Et₃N).

Continuous Flow Preparation of (Hetero)benzylic Lithiums via Iodine-Lithium Exchange Reaction under Barbier Conditions

Herein we report the generation of benzylic lithiums via an iodine-lithium exchange reaction on benzylic iodides performed in continuous flow using tBuLi as the exchange reagent. The resulting benzylic lithium species are trapped in situ by carbonyl electrophiles under Barbier conditions, resulting in benzylic secondary and tertiary alcohols. This flow procedure further allows the generation of highly reactive heterobenzylic lithium compounds, which are difficult to generate under batch conditions. A general scale-up was possible without further optimization.

Addition of Highly Polarized Organometallic Compounds to N-tert-Butanesulfinyl Imines in Deep Eutectic Solvents under Air: Preparation of Chiral Amines of Pharmaceutical Interest

Highly polarized organometallic compounds of s-block elements are added smoothly to chiral N-tert-butanesulfinyl imines in the biodegradable d-sorbitol/choline chloride eutectic mixture, thereby granting access to enantioenriched primary amines after quantitatively removing the sulfinyl group. The practicality of the method is further highlighted by proceeding at ambient temperature and under air, with very short reaction times (2 min), enabling the preparation of diastereoisomeric sulfinamides in very good yields (74-98 %) and with a broad substrate scope, and the possibility of scaling up the process. The method is demonstrated in the asymmetric syntheses of both the chiral amine side-chain of (R,R)-Formoterol (96 % ee) and the pharmaceutically relevant (R)-Cinacalcet (98 % ee).

Boosting Conjugate Addition to Nitroolefins Using Lithium Tetraorganozincates: Synthetic Strategies and Structural Insights

We report the first transition metal catalyst- and ligand-free conjugate addition of lithium tetraorganozincates (R₄ ZnLi₂ ) to nitroolefins. Displaying enhanced nucleophilicity combined with unique chemoselectivity and functional group tolerance, homoleptic aliphatic and aromatic R₄ ZnLi₂ provide access to valuable nitroalkanes in up to 98 % yield under mild conditions (0 °C) and short reaction time (30 min). This is particularly remarkable when employing β-nitroacrylates and β-nitroenones, where despite the presence of other electrophilic groups, selective 1,4 addition to the C=C is preferred. Structural and spectroscopic studies confirmed the formation of tetraorganozincate species in solution, the nature of which has been a long debated issue, and allowed to unveil the key role played by donor additives on the aggregation and structure of these reagents. Thus, while chelating N,N,N',N'-tetramethylethylenediamine (TMEDA) and (R,R)-N,N,N',N'-tetramethyl-1,2-diaminocyclohexane (TMCDA) favour the formation of contacted-ion pair zincates, macrocyclic Lewis donor 12-crown-4 triggers an immediate disproportionation process of Et₄ ZnLi₂ into equimolar amounts of solvent-separated Et₃ ZnLi and EtLi.

Ultrafast amidation of esters using lithium amides under aerobic ambient temperature conditions in sustainable solvents

Using 2-methyl THF as solvent enables efficient and ultrafast amidation of esters by lithium amides at room temperature in air, edging closer towards reaching air- and moisture-compatible polar organometallic chemistry.

Lithium amides constitute one of the most commonly used classes of reagents in synthetic chemistry. However, despite having many applications, their use is handicapped by the requirement of low temperatures, in order to control their reactivity, as well as the need for dry organic solvents and protective inert atmosphere protocols to prevent their fast decomposition. Advancing the development of air- and moisture-compatible polar organometallic chemistry, the chemoselective and ultrafast amidation of esters mediated by lithium amides is reported. Establishing a novel sustainable access to carboxamides, this has been accomplished via direct C–O bond cleavage of a range of esters using glycerol or 2-MeTHF as a solvent, in air. High yields and good selectivity are observed while operating at ambient temperature, without the need for transition-metal mediation, and the protocol extends to transamidation processes. Pre-coordination of the organic substrate to the reactive lithium amide as a key step in the amidation processes has been assessed, enabling the structural elucidation of the coordination adduct [{Li(NPh₂)(O Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CPh(NMe₂))}₂] (8) when toluene is employed as a solvent. No evidence for formation of a complex of this type has been found when using donor THF as a solvent. Structural and spectroscopic insights into the constitution of selected lithium amides in 2-MeTHF are provided that support the involvement of small kinetically activated aggregates that can react rapidly with the organic substrates, favouring the C–O bond cleavage/C–N bond formation processes over competing hydrolysis/degradation of the lithium amides by moisture or air.

DESign of Sustainable One-Pot Chemoenzymatic Organic Transformations in Deep Eutectic Solvents for the Synthesis of 1,2-Disubstituted Aromatic Olefins

The self-assembly of styrene-type olefins into the corresponding stilbenes was conveniently performed in the Deep Eutectic Solvent (DES) mixture 1ChCl/2Gly under air and in the absence of hazardous organic co-solvents using a one-pot chemo-biocatalytic route. Here, an enzymatic decarboxylation of p-hydroxycinnamic acids sequentially followed by a ruthenium-catalyzed metathesis of olefins has been investigated in DES. Moreover, and to extend the design of chemoenzymatic processes in DESs, we also coupled the aforementioned enzymatic decarboxylation reaction to now concomitant Pd-catalyzed Heck-type C-C coupling to produce biaryl derivatives under environmentally friendly reaction conditions.

Deep Eutectic Solvents as Effective Reaction Media for the Synthesis of 2-Hydroxyphenylbenzimidazole-based Scaffolds en Route to Donepezil-Like Compounds

An unsubstituted 2-hydroxyphenylbenzimidazole has recently been included as a scaffold in a series of hybrids (including the hit compound PZ1) based on the framework of the acetylcholinesterase (AChE) inhibitor Donepezil, which is a new promising multi-target ligand in Alzheimer’s disease (AD) treatment. Building upon these findings, we have now designed and completed the whole synthesis of PZ1 in the so-called deep eutectic solvents (DESs), which have emerged as an unconventional class of bio-renewable reaction media in green synthesis. Under optimized reaction conditions, the preparation of a series of 2-hydroxyphenylbenzimidazole-based nuclei has also been perfected in DESs, and comparison with other routes which employ toxic and volatile organic solvents (VOCs) provided. The functionalization of the aromatic ring can have implications on some important biological properties of the described derivatives and will be the subject of future studies of structure-activity relationships (SARs).

Lateral lithiation in deep eutectic solvents: regioselective functionalization of substituted toluene derivatives

The heteroatom-directed lateral lithiation of functionalized toluenes in a choline chloride-based eutectic mixture is reported. The metalations proceed within ultrafast reaction times, with a broad substrate and electrophile scope. The directing groups provide a rapid and high regioselective access to functionalized aromatic derivatives of remarkable synthetic value.

Combination of organocatalytic oxidation of alcohols and organolithium chemistry (RLi) in aqueous media, at room temperature and under aerobic conditions

Organocatalysis and highly-polar s-block organometallic chemistry (RLi) work together in water, under air and at room temperature for the selective and ultrafast synthesis of tertiary alcohols.

Reshaping Ullmann Amine Synthesis in Deep Eutectic Solvents: A Mild Approach for Cu-Catalyzed C-N Coupling Reactions With No Additional Ligands

The CuI-catalyzed Ullmann amine cross-coupling between (hetero)aryl halides (Br, I) and aromatic and aliphatic amines has been accomplished in deep eutectic solvents as environmentally benign and recycling reaction media. Under optimized conditions, the reaction proceeds smoothly under mild conditions (60–100°C) in air, in the absence of ligands, with a catalyst (CuI) loading of 10 mol% and K₂CO₃ (aliphatic primary and secondary amines) or t-BuOK (aromatic amines) as the base. A variety of amines have been synthesized in yields up to 98% with a broad substrate scope.