Poly-Phosphamide Catalyzed Visible-Light-Driven CH4 and Dark-Phase-Mediated Cyclic Carbonate Productions Utilizing CO2

A poly-phosphamide (POP) with a band gap of 2.8 eV is used for the photochemical conversion of CO2 into CH4 and chemical conversion of CO2 and organo-epoxides into cyclic carbonates. The Tauc plot and Mott Schottky analyses indicate the conduction band potential at -1.49 V (vs NHE), much more negative than the multi-electron CO2 reduction potential and the lifetime of the photo-excited electron is found 2.8 ns. On photoirradiation of 420 nm light, the POP in the presence of triethanolamine or ascorbic acid can selectively convert CO2 into CH4 (≈99%) with a yield of 4.6 mmol g-1. On visible-light irradiation, the drop of charge-transfer resistance (Rct) and an enhancement of cathodic current further confirm the photon-harvesting efficiency of the POP. In situ, FTIR study identifies the CO2 adsorption to the POP and possible reaction intermediate, like *-CO, *-CH2OH. POP also behaves as a catalyst for CO2 conversion to cyclic carbonates under solvent-free conditions with more than 98% yield. After the light-phase and dark-phase reactions, POP can be successfully recycled at least five times without structural degradation. Herein, the POP acts as a bi-functional, and recyclable polymeric organic material to convert CO2 to essential feedstocks under mild reaction conditions.

A Sequential Catalytic Carbonation-Hydrolysis-Diol Dehydrogenation Reaction of Epoxides

The design of cascade reactions in synthetic programs is of interest, particularly if the individual steps involve catalyzed reactions, and simple and highly available molecules such as carbon dioxide (CO2), water (H2O), and dihydrogen (H2) are employed. Herein, a three-step sequential reaction is shown from epoxides to dehydrogenated diols, catalyzed by a combination of commercially available ionic liquids and supported Pt species on charcoal (Pt/C) in low amounts (<0.05 mol%). The process involves first carbonation of epoxides with CO2, followed by the opening of the carbonate with H2O, and then an acceptor-less dehydrogenation reaction of the resulting diol to release H2. The inclusion of this last step in the one-pot synthesis of diols from epoxides is, to the knowledge, unprecedented. Reactive and kinetic experiments for each individual step reveal the key role of CO2 to avoid epoxide polymerizations and enable the synthesis of a clean diol for the final dehydrogenation reaction.

Facile construction of heterogeneous dual-ionic poly(ionic liquid)s for efficient and mild conversion of CO2 into cyclic carbonates

In the context of peaking carbon dioxide emissions and carbon neutrality, development of feasible methods for converting CO2 into high value-added chemicals stands out as a hot subject. In this study, P[D+COO-][Br-][DBUH+], a series of novel heterogeneous dual-ionic poly(ionic liquid)s (PILs) were synthesized readily from 2-(dimethylamino) ethyl methacrylate (DMAEMA), bromo-substituted aliphatic acids, organic bases and divinylbenzene (DVB). The structures, compositions and morphologies were characterized or determined by nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), infrared spectroscopy (IR), scanning electron microscopes (SEM), and Brunauer-Emmett-Teller analysis (BET), etc. Application of the P[D+COO-][Br-][DBUH+] series as catalysts in converting CO2 into cyclic carbonates showed that P[D+COO-][Br-][DBUH+]-2/1/0.6 was able to catalyze epiclorohydrin-CO2 cycloaddition the most efficiently. This afforded chloropropylene carbonate (CPC) in 98.4% yield with ≥ 99% selectivity in 24 hr under solvent- and additive-free conditions at atmospheric pressure. Reusability experiments showed that recycling of the catalyst 6 times only resulted in a slight decline in the catalytic performance. In addition, it could be used for the synthesis of a variety of differently substituted cyclic carbonates in good to excellent yields. Finally, key catalytic active sites were probed, and a reasonable mechanism was proposed accordingly. In summary, this work poses an efficient strategy for heterogenization of dual-ionic PILs and provides a mild and environmentally benign approach to the fixation and utilization of carbon dioxide.

Boosting CO2 Catalytic Fixation to Cyclic Carbonates over Aluminum Porphyrin-Based Porous Hyper-Cross-Linked Ionic Polymers via Synthetic Control of Active Site Proximity

Multifunctionalization of porous organic polymers (POPs) toward cooperative CO2 catalysis has attracted so much attention in recent years, but it still remains a huge challenge to scientists. In this contribution, a concise and efficient method to construct aluminum porphyrin-based hyper-cross-linked ionic polymers has been demonstrated for the first time, which are featured with high surface areas and hierarchical structures. Obviously, the preparation of metalloporphyrin-based hyper-cross-linked polymers with tetraphenylmethane-derived three-dimensional structures is beneficial for the introduction of abundant ionic active sites and the formation of hierarchical porous structures. By regulating the locations and amounts of cooperative active sites to make them highly dispersed and easily accessible, the catalytic activity of as-maded catalyst can be greatly improved for CO2 cycloaddition conversion to cyclic carbonates without cocatalysts and solvents, providing the highest initial turnover frequency up to 8400 h-1 of heterogeneous catalysts reported to date. In addition, the catalyst can be easily recovered by filtration and reused at least ten times without a significant decrease in catalytic activity. This work not only presents a promising strategy to improve the catalytic activity by controlling active site proximity via different synthetic methods but also offers an attractive perspective in the field of CO2 catalytic conversion.

Integrating metal complex units into knitted hypercrosslinked polymers for enhanced efficiency of cyclization reactions with CO2

Porous hypercrosslinked polymers functionalized with aluminium porphyrins and N-heterocyclic carbene-silver complexes showed excellent catalytic properties under ambient conditions in the cycloaddition of epoxides and the carboxylative cyclization of propargylic alcohols, both with CO2, respectively.

Impact of Side Chains in 1-n-Alkylimidazolium Ionomers on Cu-Catalyzed Electrochemical CO2 Reduction

This study presents the impact of the side chains in 1-n-alkylimidazolium ionomers with varying side chain lengths (CnH2n+1 where n = 1, 4, 10, 16) on Cu-catalyzed electrochemical CO2 reduction reaction (CO2RR). Longer side chains suppress the H2 and CH4 formation, with the n-hexadecyl ionomer (n = 16) showing the greatest reduction in kinetics by up to 56.5% and 60.0%, respectively. On the other hand, C2H4 production demonstrates optimal Faradaic efficiency with the n-decyl ionomer (n = 10), a substantial increase of 59.9% compared to its methyl analog (n = 1). Through a combination of density functional theory calculations and material characterization, it is revealed that the engineering of the side chains effectively modulates the thermodynamic stability of key intermediates, thus influencing the selectivity of both CO2RR and hydrogen evolution reaction. Moreover, ionomer engineering enables industrially relevant partial current density of -209.5 mA cm-2 and a Faradaic efficiency of 52.4% for C2H4 production at 3.95 V, even with a moderately active Cu catalyst, outperforming previous benchmarks and allowing for further improvement through catalyst engineering. This study underscores the critical role of ionomers in CO2RR, providing insights into their optimal design for sustainable chemical synthesis.

Heterogenization of Ionic Liquid on Multiwalled Carbon Nanotubes for Lead(II) Ion Detection

The presence of lead(II) ion poses a significant threat to water systems due to their toxicity and potential health hazards. The detection of Pb2+ ions in contaminated water is very crucial. The ionic liquid functionalized multiwalled carbon nanotubes (IL@MWCNT) nanocomposite was fabricated using ionic liquid (IL) 1-methyl-3-(4-sulfobutyl)-imidazolium chloride and multiwalled carbon nanotubes (MWCNTs) for detection of lead(II) ions. It is a novel method to heterogenize the layer of IL on the surface of MWCNTs. The XPS and FTIR analyses confirm that the ionic liquid is not decomposed during annealing process. Moreover, the XRD analysis shows the presence of MWCNTs and carbon quantum dots (CQDs). The HRTEM results exhibit the aggregation of MWCNTs with IL, and formation of small distorted round shaped flakes of CQDs. Further, the successful heterogenization of IL on the surface of MWCNTs is also confirmed by TGA-DSC analysis. The quenching phenomenon of nanocomposite was observed by UV-Visible spectroscopy. The nanocomposite exhibits high performance for the selective detection of lead(II) ions in comparison to other metal ions. The presence of lead(II) ions eventually reduced the intensity of absorption. A limit of detection (LOD) of 9.16 nM was attained for Pb2+ ions in a concentration range of 0-20 nM.

One-step synthesis of hydroxyl-functionalized ionic hyper-cross-linked polymers with high surface areas for efficient CO2 capture and fixation

Ionic liquid-based functional materials have attracted significant attention for their distinctive structure in the field of CO2 capture and conversion. In this work, a series of hydroxyl-functionalized ionic hyper-cross-linked polymers are prepared through a one-step Friedel-Crafts reaction involving hypoxanthine (HX) and benzimidazole (BI) as the monomers, along with various halohydrocarbon crosslinking agents. These polymers demonstrate a high specific surface area (558-1480 m2·g-1), well-developed microporous structure, and unique ion sites, enabling them to exhibit remarkable and reversible CO2 adsorption properties. Particularly noteworthy is their CO2 adsorption capacity, which surpasses that of similar ionic polymers documented in the literature, reaching 157.5 mg·g-1 at 273 K and 1 bar. Additionally, these polymers function as recyclable catalysts in the cycloaddition reaction of CO2 and epoxides, enabling the conversion of CO2 into cyclic carbonates with yields of up to 99 % even without a co-catalyst. Mechanism investigation reveals that the introduction of hydroxyl groups in the polymer is the key to improving catalytic activity through a synergistic catalytic effect. This research provides a novel concept for designing ionic functional materials with capabilities in both CO2 adsorption and catalytic activity.

Synthesis of metal-free benzimidazole-based catalysts and its application in CO2 cycloaddition

Ionic polymers functionalized with hydroxyl, carboxyl, and amino groups can enhance the catalytic activity of catalysts. However, the straightforward preparation of bifunctional ionic polymers containing abundant ionic active sites and hydrogen bond donors remains challenging. In this study, a series of porous ionic polymers (BZIs) containing different hydrogen bond donors (-NH2, -OH, -COOH) were prepared through a simple one-pot Friedel-Crafts alkylation using benzimidazole derivatives and benzyl bromide. The structures and properties of BZIs were characterized by various techniques such as Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, solid-state nuclear magnetic resonance, and scanning electron microscopy. Among the prepared catalysts (BZI-NH2, BZI-OH, and BZI-COOH), BZI-NH2 exhibited the highest catalytic activity and recyclability, achieving a yield of 97% in the CO2 cycloaddition. The synergistic effect of Br-, hydrogen bond donors (-NH-, -NH2), and N+ in BZI-NH2 was found to contribute to its superior catalytic performance. DFT calculations were employed to study the effect of hydrogen bonds, Br-, and N+ in BZI-NH2 and BZI-OH on the CO2 cycloaddition. Using BZI-NH2 as an example, a mechanism was proposed for the synergistic effect between amino groups and bromide ions in catalyzing the CO2 cycloaddition reaction.

In situ dipole formation to achieve high open-circuit voltage in inverted perovskite solar cells via fluorinated pseudohalide engineering

Many studies have shown that the severe photoluminescence quantum yield (PLQY) loss at the interface between the perovskite and electron transport layer (ETL) is the main cause of voltage loss in inverted perovskite solar cells (p-i-n PSCs). However, currently there are no effective in situ passivation techniques to minimize this nonradiative recombination. Here, the fluorinated pseudohalide ionic liquid (FPH-IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMIMTFSI) is introduced into the perovskite precursor formulation. EMIMTFSI can change the dielectric environment and energy-level arrangement of the perovskite by accumulating on the top surface and spontaneously forming dipoles. As a result, the excitonic binding energy (Eb) and nonradiative recombination loss are significantly reduced. At the same time, TFSI- reduces the formation energy of vacancy defects and stabilizes the perovskite phase by forming N-H⋯F hydrogen bonds between FA+ and the C-F bond in EMIMTFSI. Finally, the EMIMTFSI-modified p-i-n PSCs achieve an excellent efficiency of 24.81% with an impressive open-circuit voltage of 1.191 V for a 1.57 eV low-bandgap perovskite. In addition, the modified devices can maintain more than 95% PCE after continuous thermal aging at 85 °C for 500 h or illumination at the maximum power point for 800 h. This work provides a new idea for minimizing the non-radiative recombination losses in p-i-n PSCs.

Laccase immobilized on nanocomposites for wastewater pollutants degradation: current status and future prospects

The bio-enzyme degradation technology is a promising approach to sustainably remove pollution in the water and laccase is one of the most widely used enzymes in this area. Nevertheless, the further industrial application of laccase is limited by low stability, short service, low reusability and high price. The immobilization technology can significantly improve the stability and reusability of enzymes and thus promoting their industrial applications. Nanocomposite materials have been developed and applied in the efficient immobilization of laccase due to their superior physical, chemical, and biological performance. This paper presents a comprehensive review of various nanocomposite immobilization methods for laccase and the consequent changes in enzymatic properties post-immobilization. Additionally, a comprehensive analysis is conducted on the factors that impact laccase immobilization and its water removal efficiency. Furthermore, this review examines the effectiveness of common contaminants' removal mechanisms while summarizing and discussing issues related to laccase immobilization on nanocomposite carriers. This review aims to provide valuable guidance for enhancing laccase immobilization efficiency and enzymatic water pollutant removal.

Synthesis of cyclic carbonates from CO2 cycloaddition to bio-based epoxides and glycerol: an overview of recent development

Anthropogenic carbon dioxide (CO₂) emissions contribute significantly to global warming and deplete fossil carbon resources, prompting a shift to bio-based raw materials. The two main technologies for reducing CO₂ emissions are capturing and either storing or utilizing it. However, while capture and storage have high reduction potential, they lack economic feasibility. Conversely, by utilizing the CO₂ captured from streams and air to produce valuable products, it can become an asset and curb greenhouse gas effects. CO₂ is a challenging C1-building block due to its high kinetic inertness and thermodynamic stability, requiring high temperature and pressure conditions and a reactive catalytic system. Nonetheless, cyclic carbonate production by reacting epoxides and CO₂ is a promising green and sustainable chemistry reaction, with enormous potential applications as an electrolyte in lithium-ion batteries, a green solvent, and a monomer in polycarbonate production. This review focuses on the most recent developments in the synthesis of cyclic carbonates from glycerol and bio-based epoxides, as well as efficient methods for chemically transforming CO₂ using flow chemistry and novel reactor designs.

One-pot facile approach to design an efficient macro-porous polymeric matrix to remediate Hg(II)and Pb(II) from aqueous medium and its performance evaluation study by mathematical modelling

In the present scenario discharge of heavy-metal ions into water bodies is a global threat that is causing serious health hazards even in low concentrations. Thus, in order to remediate the heavy-metal [Hg(II) and Pb(II)] toxicity, an organic-inorganic hybrid functional porous metallo-polymeric network i. e, poly(Zirconyl methacrylate-co-1-vinyl imidazole) (pZrVIm) was fabricated via one-pot facile synthesis approach. The pZrVIm architecture has shown high removal efficiency for Hg(II) and Pb(II) aqueous medium even in extremely low quantities. Advanced instrumental techniques were used to characterize the structural and morphological characteristics of pZrVIm. Different experimental variables i.e., reaction time, pH, initial feed concentration, co-ion effects etc. were explored to examine adsorption behaviour. The maximum adsorption capacities (q_max) of pZrVIm5 were calculated as 168.06 and 162.34 mg g^-1 for Hg(II) and Pb(II) respectively by the Langmuir isotherm model. Data from isotherms showed that monolayer adsorption on a homogeneous surface is the rate-limiting stage and followed pseudo-second-order kinetic process. The Artificial Neural Network (ANN) modelling was used to validate kinetics and isotherm data which revealed high accuracy of the model with correlation coefficient values (R = 0.99). Various types of isotherm models such as Langmuir, Freundlich, Dubinin-Radushkevich, Temkin, Redlich-Peterson, Toth and Koble-Corigen have been studied to determine the adsorption phenomena. The pore diffusion model revealed breakthrough time of 91 h and 84 h, Hg(II) and Pb(II) with the feed concentration of 15 mg L^-1 respectively. The study revealed that pZrVIm5 has great potential for heavy metal ions remediation for water treatment.

Poly(ionic liquid)s for Photo-Driven CO2 Cycloaddition: Electron Donor-Acceptor Segments Matter

CO₂ cycloaddition with epoxides is a key catalytic procedure for CO₂ utilization. Several metal-based catalysts with cocatalysts are developed for photo-driven CO₂ cycloaddition, while facing difficulties in product purification and continuous reaction. Here, poly(ionic liquid)s are proposed as metal-free catalysts for photo-driven CO₂ cycloaddition without cocatalysts. A series of poly(ionic liquid)s with donor-acceptor segments are fabricated and their photo-driven catalytic performance (conversion rate of 83.5% for glycidyl phenyl ether) outstrips (≈4.9 times) their thermal-driven catalytic performance (17.2%) at the same temperature. Mechanism studies confirm that photo-induced charge separation is promoted by the donor-acceptor segments and can accelerate the CO₂ cycloaddition reaction. This work paves the way for the further use of poly(ionic liquid)s as catalysts in photo-driven CO₂ cycloaddition.

Aluminum Porphyrin-Based Ionic Porous Aromatic Frameworks Having High Surface Areas and Highly Dispersed Dual-Function Sites for Boosting the Catalytic Conversion of CO2 into Cyclic Carbonates

Multifunctionalization of porous organic polymers toward synergistic CO₂ catalysis has drawn much attention in recent decades, but it still faces many challenges. Herein, we develop a facile, simple, and efficient strategy to obtain a series of aluminum porphyrin-based ionic porous aromatic frameworks (iPAFs), which are considered excellent bifunctional catalysts for converting CO₂ into cyclic carbonates without any cocatalyst under mild and solvent-free conditions. By increasing the amounts of tetraphenylmethane fragments in the porphyrin backbones, the cooperative effect between Lewis acidic metal centers and nucleophilic ionic sites has been enhanced and then the significant improvement of catalytic activity can be achieved owing to the high surface areas (up to 719 m²·g^-1), abundant hierarchical micro-mesopores, and prominent CO₂ adsorption capacities (up to 1.8 mmol·g^-1 at 273 K) as well as highly dispersed dual-function sites. More fascinatingly, high-active AlPor-iPAF-3 enables CO₂ cycloaddition to perform with diluted CO₂ (15% CO₂ in 85% N₂, v/v) or under ambient conditions. Therefore, this postsynthetic modification procedure in combination with the framework dilution strategy provides a new approach to fabricating high-surface-area metalloporphyrin-based porous ionic polymers (PIPs) with hierarchical structures, which is conducive to improving the accessibility of multiple active sites around substrates.

Organocatalytic Polymers from Affordable and Readily Available Building Blocks for the Cycloaddition of CO2 to Epoxides

The catalytic cycloaddition of CO₂ to epoxides to afford cyclic carbonates as useful monomers, intermediates, solvents, and additives is a continuously growing field of investigation as a way to carry out the atom-economic conversion of CO₂ to value-added products. Metal-free organocatalytic compounds are attractive systems among various catalysts for such transformations because they are inexpensive, nontoxic, and readily available. Herein, we highlight and discuss key advances in the development of polymer-based organocatalytic materials that match these requirements of affordability and availability by considering their synthetic routes, the monomers, and the supports employed. The discussion is organized according to the number (monofunctional versus bifunctional materials) and type of catalytically active moieties, including both halide-based and halide-free systems. Two general synthetic approaches are identified based on the postsynthetic functionalization of polymeric supports or the copolymerization of monomers bearing catalytically active moieties. After a review of the material syntheses and catalytic activities, the chemical and structural features affecting catalytic performance are discussed. Based on such analysis, some strategies for the future design of affordable and readily available polymer-based organocatalysts with enhanced catalytic activity under mild conditions are considered.

High-Surface-Area Metalloporphyrin-Based Porous Ionic Polymers by the Direct Condensation Strategy for Enhanced CO2 Capture and Catalytic Conversion into Cyclic Carbonates

Metalloporphyrin-based porous organic polymers (POPs) that behave as advanced biomimetic nanoreactors have drawn continuous attention for heterogeneous CO₂ catalysis in the past decades. Inspired by the double activation model of epoxides, the design and synthesis of metalloporphyrin-based porous ionic polymers (PIPs) are considered as one of the most promising approaches for converting CO₂ to cyclic carbonates under cocatalyst- and solvent-free conditions. To overcome the obstacle of poor reaction activity of ionic monomers or highly irregular stacking architecture, in this paper, we have proposed and demonstrated a modular bottom-up approach for constructing a series of high-surface-area metalloporphyrin-based PIPs in high yields by the direct condensation strategy, thus boosting the close contact of multiple active sites and achieving the enhanced CO₂ capture and catalytic conversion into cyclic carbonates with high turnover frequencies under mild conditions. These recyclable aluminum-porphyrin-based PIPs are featured with high surface areas, prominent CO₂ adsorptive capacities, rigid porphyrin skeletons, and flexible ionic pendants, as well as the matched amounts and spatial positions of metal centers and ionic sites, in which is demonstrated to be one of the quite competitive catalysts. Therefore, this strategy of introducing ionic components into the porphyrin frameworks as flexible side chains rather than main chains and adjusting the reactivity ratios of comonomers by structure-oriented methods, provides feasible guidance for the multifunctionalization of metalloporphyrin-based POPs, thereby increasing the accessibility of multiple active sites and improving their synergistic catalytic behavior.

Facile Construction of Carboxyl-Functionalized Ionic Polymer towards Synergistic Catalytic Cycloaddition of Carbon Dioxide into Cyclic Carbonates

The development of bifunctional ionic polymers as heterogeneous catalysts for effective, cocatalyst- and metal-free cycloaddition of carbon dioxide into cyclic carbonates has attracted increasing attention. However, facile fabrication of such polymers having high numbers of ionic active sites, suitable types of hydrogen bond donors (HBDs), and controlled spatial positions of dual active sites remains a challenging task. Herein, imidazolium-based ionic polymers with hydroxyl/carboxyl groups and high ionic density were facilely prepared by a one-pot quaternization reaction. Catalytic evaluation demonstrated that the presence of HBDs (hydroxyl or carboxyl) could enhance the catalytic activities of ionic polymers significantly toward the CO₂ cycloaddition reaction. Among the prepared catalysts, carboxyl-functionalized ionic polymer (PIMBr-COOH) displayed the highest catalytic activity (94% yield) in the benchmark cycloaddition reaction of CO₂ and epichlorohydrin, which was higher than hydroxyl-functionalized ionic polymer (PIMBr-OH, 76% yield), and far exceeded ionic polymer without HBDs groups (PIMBr, 54% yield). Furthermore, PIMBr-COOH demonstrated good recyclability and wide substrate tolerance. Under ambient CO₂ pressure, a number of epoxides were smoothly cycloadded into cyclic carbonates. Additionally, density functional theory (DFT) calculation verified the formation of strong hydrogen bonds between epoxide and the HBDs of ionic polymers. Furthermore, a possible mechanism was proposed based on the synergistic effect between carboxyl and Br⁻ functionalities. Thus, a facile, one-pot synthetic strategy for the construction of bifunctional ionic polymers was developed for CO₂ fixation.

Polyamine-functionalized imidazolyl poly(ionic liquid)s for the efficient conversion of CO2 into cyclic carbonates

The synergistic effect of polyamine groups and nucleophile (Br−) significantly improved the catalytic performance of N4-PIL-2, which can convert epoxides into cyclic carbonates with excellent yields and selectivity under ambient pressure.

N-Heterocyclic carbenes and their precursors in functionalised porous materials

Though N-heterocyclic carbenes (NHCs) have emerged as diverse and powerful discrete functional molecules in pharmaceutics, nanotechnology, and catalysis over decades, the heterogenization of NHCs and their precursors for broader applications in porous materials, like metal-organic frameworks (MOFs), porous coordination polymers (PCPs), covalent-organic frameworks (COFs), porous organic polymers (POPs), and porous organometallic cages (POMCs) was not extensively studied until the last ten years. By de novo or post-synthetic modification (PSM) methods, myriads of NHCs and their precursors containing building blocks were designed and integrated into MOFs, PCPs, COFs, POPs and POMCs to form various structures and porosities. Functionalisation with NHCs and their precursors significantly expands the scope of the potential applications of porous materials by tuning the pore surface chemical/physical properties, providing active sites for binding guest molecules and substrates and realizing recyclability. In this review, we summarise and discuss the recent progress on the synthetic methods, structural features, and promising applications of NHCs and their precursors in functionalised porous materials. At the end, a brief perspective on the encouraging future prospects and challenges in this contemporary field is presented. This review will serve as a guide for researchers to design and synthesize more novel porous materials functionalised with NHCs and their precursors.

Pyrene-based ammonium bromides combined with g-C3N4 for the synergistically enhanced fixation reaction of CO2 and epoxides

A new type of pyrene-based ammonium bromides (PABs) was synthesized via the reaction of bromomethyl pyrene and tertiary amines with different alkyl chains combined with graphitic carbon nitride (g-C3N4) through π-π stacking interactions. The new pyrene-based ammonium bromides were investigated both in homogenous phase and heterogeneous phase combining with g-C3N4 for the CO2 fixation reaction of epoxides under mild conditions. Obviously, the combination was proved to be an efficient system for the conversion of epoxides. The interaction between g-C3N4 and PABs was confirmed by quantum chemical calculations. g-C3N4/Py-C12 exhibited an excellent yield of cyclic carbonates (above 93%) at 80 °C, atmospheric pressure and solvent-free conditions. A preliminary kinetic study was performed using g-C3N4/Py-C12 and the activation energy was calculated to be 61.5 kJ mol-1.

A Study on the Stability of Carbon Nanoforms-Polyimidazolium Network Hybrids in the Conversion of CO2 into Cyclic Carbonates: Increase in Catalytic Activity after Reuse

Three different carbon nanoforms (CNFs), single-walled and multi-walled carbon nanotubes (SWCNTs, MWCNTs) and carbon nanohorns (CNHs), have been used as supports for the direct polymerization of variable amounts of a bis-vinylimidazolium salt. Transmission electron microscopy confirmed that all CNFs act as templates on the growth of the polymeric network, which perfectly covers the nanocarbons forming a cylindrical (SWCNTs, MWCNTs) or spherical (CNHs) coating. The stability of these hybrid materials was investigated in the conversion of CO2 into cyclic carbonate under high temperature and CO2 pressure. Compared with the homopolymerized monomer, nanotube-based materials display an improved catalytic activity. Beside the low catalytic loading (0.05-0.09 mol%) and the absence of Lewis acid co-catalysts, all the materials showed high TON values (up to 1154 for epichlorohydrin with SW-1:2). Interestingly, despite the loss of part of the polymeric coating for crumbling or peeling, the activity increases upon recycling of the materials, and this behaviour was ascribed to their change in morphology, which led to materials with higher surface areas and with more accessible catalytic sites. Transmission electron microscopy analysis, along with different experiments, have been carried out in order to elucidate these findings.

Mechanochemical Process to Construct Porous Ionic Polymers by Menshutkin Reaction

The synthesis of porous ionic polymers (PIPs) via the Menshutkin reaction is intriguing because the reaction works smoothly in catalyst-free condition with 100 % atom utilization. However, the rotation of methane site, nonrigid knots, and charge interaction all may cause collapses of the channel, which is detrimental to the synthesis PIP in solid-state conditions. In this work, an inorganic salt (NaBr, NaCl: pollution-free and easy to recycle) was rationally chosen as the hard template and effectively prevented the intermolecular packing. Moreover, the increased surface area dramatically promoted the catalytic activity of PIP for cyclic carbonate synthesis. This work provides a green and efficient strategy to construct PIPs via the Menshutkin reaction.

POSS and imidazolium-constructed ionic porous hypercrosslinked polymers with multiple active sites for synergistic catalytic CO2 transformation

In this work, we reported a facile one-pot approach to construct polyhedral oligomeric silsesquioxane (POSS) and imidazolium-based ionic porous hypercrosslinked polymers (denoted as iPHCPs) with multiple active sites towards efficient catalytic conversion of carbon dioxide (CO₂) to high value-added cyclic carbonates. The targeted iPHCPs were synthesized from a rigid molecular building block octavinylsilsesquioxane (VPOSS) and a newly-designed phenyl-based imidazolium ionic crosslinker through the AlCl₃-catalyzed Friedel-Crafts reaction. The desired multiple active sites come from the mixed anions including free Cl^- and Br^- anions, and in situ formed Lewis acidic metal-halogen complex anions [AlCl₃Br]^- within imidazolium moieties and POSS-derived Si-OH groups during the synthetic process. The typical polymer iPHCP-12 possesses a hierarchical micro-/mesoporous structure with a high surface area up to 537 m² g^-1 and shows a fluffy nano-morphology. By virtue of the co-existence of free nucleophilic Cl^- and Br^- anions, the metal complex anion [AlCl₃Br]^- with both electrophilic and nucleophilic characters and electrophilic hydrogen bond donor (HBD) Si-OH groups, iPHCP-12 is regarded as an efficient recyclable heterogeneous catalyst for synergistic catalytic conversion of CO₂ with various epoxides into cyclic carbonates under mild conditions. The present work provides a succinct one-pot strategy to construct task-specific ionic porous hypercrosslinked polymers from easily available modules for the targeted catalytic applications.

Synthesis of Bifunctional Porphyrin Polymers for Catalytic Conversion of Dilute CO2 to Cyclic Carbonates

Development of efficient solid catalysts for catalytic conversion of dilute CO2 is of extreme importance for carbon capture and utilization. We report the synthesis of bifunctional polymers co-incorporated with porphyrin-Zn as Lewis acid sites and Br- as nucleophiles for the cycloaddition of dilute CO2 with epoxides in this work. It was found that the Br-/Zn ratio has a volcano relation with the activity of bifunctional polymers in a cycloaddition reaction, indicating the synergy effect between Lewis acid sites and nucleophiles. The turnover frequency (TOF) of the bifunctional polymer is more than four-fold that of the physical mixture of tetrabutylammonium bromide and porphyrin-Zn-incorporated polymer, implying the enhanced cooperation between Br- and porphyrin-Zn in the polymer network. The bifunctional polymer with optimized Br-/Zn afforded 99% conversion, 99% selectivity, and a TOF as high as 12,000 h-1 for the cycloaddition of CO2 and propylene oxide, which is among the most active solid catalysts ever reported. Furthermore, the bifunctional polymer could efficiently catalyze the cycloaddition of epichlorohydrin with dilute CO2 (7.5% CO2 balanced by N2) even under ambient conditions, demonstrating its potential application in industrial-scale production.

3D Cationic Polymeric Network Nanotrap for Efficient Collection of Perrhenate Anion from Wastewater

Rhenium is one of the most valuable elements found in nature, and its capture and recycle are highly desirable for resource recovery. However, the effective and efficient collection of this material from industrial waste remains quite challenging. Herein, a tetraphenylmethane-based cationic polymeric network (CPN-tpm) nanotrap is designed, synthesized, and evaluated for ReO₄^- recovery. 3D building units are used to construct imidazolium salt-based polymers with positive charges, which yields a record maximum uptake capacity of 1133 mg g^-1 for ReO₄^- collection as well as fast kinetics ReO₄^- uptake. The sorption equilibrium is reached within 20 min and a k_d value of 8.5 × 10⁵ mL g^-1 is obtained. The sorption capacity of CPN-tpm remains stable over a wide range of pH values and the removal efficiency exceeds 60% for pH levels below 2. Moreover, CPN-tpm exhibits good recyclability for at least five cycles of the sorption-desorption process. This work provides a new route for constructing a kind of new high-performance polymeric material for rhenium recovery and rhenium-contained industrial wastewater treatment.

Controlled Nanostructuration of Cobalt Oxyhydroxide Electrode Material for Hybrid Supercapacitors

Nanostructuration is one of the most promising strategies to develop performant electrode materials for energy storage devices, such as hybrid supercapacitors. In this work, we studied the influence of precipitation medium and the use of a series of 1-alkyl-3-methylimidazolium bromide ionic liquids for the nanostructuration of β(III) cobalt oxyhydroxides. Then, the effect of the nanostructuration and the impact of the different ionic liquids used during synthesis were investigated in terms of energy storage performances. First, we demonstrated that forward precipitation, in a cobalt-rich medium, leads to smaller particles with higher specific surface areas (SSA) and an enhanced mesoporosity. Introduction of ionic liquids (ILs) in the precipitation medium further strongly increased the specific surface area and the mesoporosity to achieve well-nanostructured materials with a very high SSA of 265 m2/g and porosity of 0.43 cm3/g. Additionally, we showed that ILs used as surfactant and template also functionalize the nanomaterial surface, leading to a beneficial synergy between the highly ionic conductive IL and the cobalt oxyhydroxide, which lowers the resistance charge transfer and improves the specific capacity. The nature of the ionic liquid had an important influence on the final electrochemical properties and the best performances were reached with the ionic liquid containing the longest alkyl chain.

Bromotrimethylsilane as a selective reagent for the synthesis of bromohydrins

Bromotrimethylsilane (TMSBr) is a very efficient reagent in the solvent-free conversion of glycerol into bromohydrins, useful intermediates in the production of fine chemicals. As glycerol is a relevant by-product in biodiesel production, TMSBr has been also tested as a mediator in transesterification in acidic conditions, providing FAME from castor oil in good yields, along with bromohydrins from glycerol. Subsequently the glycerol conversion was optimized and depending on the reaction conditions, glycerol can be selectively converted into α-monobromohydrin (1-MBH) or α,γ-dibromohydrin (1,3-DBH) in very good yields.

Selective Catalytic Isomerization of β-Pinene Oxide to Perillyl Alcohol Enhanced by Protic Tetraimidazolium Nitrate

A series of tetraimidazolium salts with different anions was prepared and applied in the isomerization of β-pinene oxide. After examining the activity of different catalysts, a remarkable enhancement of the selectivity of perillyl alcohol (47 %) was obtained over [PEimi][HNO3 ]4 under mild reaction conditions and using DMSO as the solvent. Furthermore, noncovalent interactions between solvent molecules and the catalyst were found by FT-IR spectroscopy and confirmed by computational chemistry. The homogeneous catalyst showed excellent stability and was reused up to six times without significant loss.

A spirobifluorene-based water-soluble imidazolium polymer for luminescence sensing

A water-soluble luminescent sensor based on a spirobifluorene-based imidazolium polymer is developed for the selective sensing of Fe³⁺ and Cr₂O₇²⁻.

Cycloaddition of CO2 to epoxides by highly nucleophilic 4-aminopyridines: establishing a relationship between carbon basicity and catalytic performance by experimental and DFT investigations

New highly nucleophilic homogeneous and heterogeneous catalysts based on the 3,4-diaminopyridine scaffold are reported for the halogen-free cycloaddition of CO₂ to epoxides.

Aminoethylimidazole ionic liquid-grafted MIL-101-NH2 heterogeneous catalyst for the conversion of CO2 and epoxide without solvent and cocatalyst

An aminoethylimidazole IL-functionalized MIL-101-NHIM-NH₂ catalyst efficiently catalyzes the cycloaddition reaction of CO₂ and epoxide without solvent and cocatalyst, owing to the synergistic effects of Cr, –NH₂ and Br⁻ active sites.