Ultrathin MXene/aramid nanofiber composite paper with excellent mechanical properties for efficient electromagnetic interference shielding

Highly electroconductive and mechanically strong Ti3C2Tx/cellulose nanofiber composite paper with gradient structure for efficient electromagnetic interference shielding

The remarkable electrical conductivity of Ti3C2Tx endows it with significant potentiality in electromagnetic interference (EMI) shielding. However, its poor mechanical properties constrain its further application. Presently, the principal approach to improve the mechanical properties of Ti3C2Tx is to introduce a large quantity of flexible polymers, which leads to a sharp decrease in conductivity and thereby impacts EMI shielding performance. Herein, a flexible Ti3C2Tx/cellulose nanofiber composite paper with a gradient structure (GS-TCCP) was fabricated by utilizing the fact that the total resistance is lower than the partial resistance in parallel circuits. The highly conductive thin layers are connected in parallel with the mechanically strong thick layers. This not only maintains the high conductivity but also promotes the enhancement of the mechanical properties. Moreover, the unique interlayer reflection and intralayer absorption mechanisms of the gradient structure also promote the further enhancement of EMI shielding effectiveness (SE). The GS-TCCP (38.33 wt% Ti3C2Tx, thickness of ∼75 μm) not only exhibits a high conductivity of ∼13110 S/m and strong mechanical properties (with a tensile strength of ∼78.2 MPa and a toughness of ∼4.019 MJ/m3), but also has an EMI SE of 46.8 dB in the X-band (8.2-12.4 GHz). In addition, its EMI efficiency reaches up to 99.998%, which is comparable to that of the homogeneous Ti3C2Tx/CNF composite paper with 50 wt% Ti3C2Tx and superior to most of the reported Ti3C2Tx-based thin film composites. The balance among conductivity, EMI shielding performance, and mechanical properties makes it have broad application prospects in fields such as EMI shielding, flexible sensing, and flexible electronic components.

Pressure-Assisted Anisotropy in Carbon Nanofiber Films for Smart Electromagnetic Interference Shielding and Joule Heating

Intelligent electromagnetic interference (EMI) shielding materials with adjustable properties and performances are garnering significant attention due to the escalating complexity of application scenarios for electronic devices. Also, the trend of miniaturization is calling for lightweight and multifunctional materials. Here, the preparation of highly aligned carbon nanofiber film (a-CNFF) by electrospinning technology and a two-stage carbonization process is proposed, in which the pressurization strategy in the carbonization process promotes the development of highly aligned fiber network structures. The serialized anisotropic structures exhibit an impressive tunability in EMI shielding effectiveness (SE) adjustable from 23.0 to 35.6 dB for linearly polarized electromagnetic waves, and a superior specific SE value (SSE/t) of 34 000 dB cm2 g-1, with an EMI SE per unit thickness of 5791 dB cm-1. Moreover, under a low load voltage of 1.6 V, the peak temperature of the film can be tuned within a wide range of 49.2-120.6 °C. These remarkable performances achieved by simply rotating the film demonstrate adjustable functionalities of the a-CNFF, providing guidelines in the applications of aerospace, military, microelectronics, and wearable devices.

Engineered MXene Biomaterials for Regenerative Medicine

MXene-based materials have attracted significant interest due to their distinct physical and chemical properties, which are relevant to fields such as energy storage, environmental science, and biomedicine. MXene has shown potential in the area of tissue regenerative medicine. However, research on its applications in tissue regeneration is still in its early stages, with a notable absence of comprehensive reviews. This review begins with a detailed description of the intrinsic properties of MXene, followed by a discussion of the various nanostructures that MXene can form, spanning from 0 to 3 dimensions. The focus then shifts to the applications of MXene-based biomaterials in tissue engineering, particularly in immunomodulation, wound healing, bone regeneration, and nerve regeneration. MXene's physicochemical properties, including conductivity, photothermal characteristics, and antibacterial properties, facilitate interactions with different cell types, influencing biological processes. These interactions highlight its potential in modulating cellular functions essential for tissue regeneration. Although the research on MXene in tissue regeneration is still developing, its versatile structural and physicochemical attributes suggest its potential role in advancing regenerative medicine.

Stretchable, Patterned Carbon Nanotube Array Enhanced by Ti3C2Tx/Graphene for Electromagnetic Interference Shielding

Stretchability and flexibility are essential characteristics for high-performance electromagnetic interference (EMI) shielding materials in wearable and smart devices. However, achieving these mechanical properties while also maintaining high EMI shielding effectiveness (SE) for shielding materials remains a significant challenge. Here, a stretchable patterned carbon nanotube (CNT) array composite film, reinforced with two-dimensional (2D) nanomaterials (Ti3C2Tx and graphene), is fabricated using a straightforward scraping method. The resulting CNT array/Ti3C2Tx/graphene composite films possess a periodic grid structure. Specifically, the composite film with a regular hexagonal pattern demonstrates an EMI SE of 36.5 dB in the X-band at a thickness of 350 μm. Additionally, the composite film exhibits excellent stretchability, flexibility, and stability. After undergoing 10,000 stretching cycles, the EMI SE remains stable. Simulation results further indicate that surface reflection is the primary EMI shielding mechanism. This simple scraping method offers a promising approach for developing stretchable and high-performance EMI shielding films, making them well suited for application in flexible devices.

Multifunctional Janus-Structured Polytetrafluoroethylene-Carbon Nanotube-Fe3O4/MXene Membranes for Enhanced EMI Shielding and Thermal Management

Herein, a novel Janus-structured multifunctional membrane with integrated electromagnetic interference (EMI) shielding and personalized thermal management is fabricated using shear-induced in situ fibrillation and vacuum-assisted filtration. Interestingly, within the polytetrafluoroethylene (PTFE)-carbon nanotube (CNT)-Fe3O4 layer (FCFe), CNT nanofibers interweave with PTFE fibers to form a stable "silk-like" structure that effectively captures Fe3O4 particles. By incorporating a highly conductive MXene layer, the FCFe/MXene (FCFe/M) membrane exhibits excellent electrical/thermal conductivity, mechanical properties, and flame retardancy. Impressively, benefiting from the rational regulation of component proportions and the design of a Janus structure, the FCFe/M membrane with a thickness of only 84.9 µm delivers outstanding EMI shielding effectiveness of 44.56 dB in the X-band, with a normalized specific SE reaching 10,421.3 dB cm2 g-1, which is attributed to the "absorption-reflection-reabsorption" mechanism. Furthermore, the membrane demonstrates low-voltage-driven Joule heating and fast-response photothermal performance. Under the stimulation of a 3 V voltage and an optical power density of 320 mW cm-2, the surface temperatures of the FCFe/M membranes can reach up to 140.4 and 145.7 °C, respectively. In brief, the FCFe/M membrane with anti-electromagnetic radiation and temperature regulation is an attractive candidate for the next generation of wearable electronics, EMI compatibility, visual heating, thermotherapy, and military and aerospace applications.

Regulating surface terminals and interlayer structure of Ti3C2Tx for superior NH3 sensing

MXene materials have exhibited potential in electrochemistry, particularly in gas sensing, due to their excellent conductivity, large specific surface area of layered materials, and unique functional groups. However, the gas sensing performance of intrinsic 2D MXene materials is often limited by their fluorine-containing terminals and interfacial structure. In this study, based on intrinsic Ti3C2Tx, we employed alkali treatment and annealing to prepare oxygen-rich Ti3C2(OH)x/Ti3C2Ox with expanded interlayer spacing, achieving enhanced gas sensing performance for NH3. The surface chemistry and structure of the sensing materials have been optimized through the synergistic regulation of MXene's unique surface terminations and the intercalation effect of layered materials. Compared to intrinsic Ti3C2Tx, the interlayer spacing of oxygen-rich Ti3C2(OH)x/Ti3C2Ox increased from 9.1 Å to 12.1 Å. The surface terminations of oxygen-rich Ti3C2(OH)x/Ti3C2Ox have been defluorinated and oxygenated. The maximum response value of oxygen-rich Ti3C2(OH)x/Ti3C2Ox to NH3 was 35.66, approximately twice that of the original Ti3C2Tx at an NH3 concentration of 200 ppm. DFT (Density functional theory) calculations and DRIFT (In situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy) tests explained the interaction between the surface terminals and NH3, indicating good selectivity and sensitivity of oxygen-rich Ti3C2(OH)x/Ti3C2Ox to NH3. The results demonstrated that the synergistic effects of surface chemistry and structural engineering are crucial for MXene to optimize the electrochemical performance, particularly the gas sensing performance. This provides a feasible approach for the performance optimization of intrinsic MXene materials.

Inkjet-printed flexible V2CTx film electrodes with excellent photoelectric properties and high capacities for energy storage device

Energy storage devices are progressively advancing in the light-weight, flexible, and wearable direction. Ti3C2Tx flexible film electrodes fabricated via a non-contact, cost-effective, high-efficiency, and large-scale inkjet printing technology were capable of satisfying these demands in our previous report. However, other MXenes that can be employed in flexible energy storage devices remain undiscovered. Herein, flexible V2CTx film electrodes (with the low formula weight vs Ti3C2Tx film electrodes) with both high capacities and excellent photoelectric properties were first fabricated. The area capacitances of V2CTx film electrodes reached 531.3-5787.0 μF⋅cm-2 at 5 mV⋅s-1, corresponding to the figure of merits (FoMs) of 0.07-0.15. Noteworthy, V2CTx film electrode exhibited excellent cyclic stability with the capacitance retention of 83 % after 7,000 consecutive charge-discharge cycles. Furthermore, flexible all solid-state symmetric V2CTx supercapacitor was assembled with the area capacitance of 23.4 μF⋅cm-2 at 5 mV⋅s-1. Inkjet printing technology reaches the combination of excellent photoelectric properties and high capacities of flexible V2CTx film electrodes, which provides a new strategy for manufacturing MXene film electrodes, broadening the application prospect of flexible energy storage devices.

Drug-Eluting and Antibacterial Core-Shell Polycaprolactone/Pectin Nanofibers Containing Ti3C2Tx MXene and Medical Herbs for Wound Dressings

Fibrous scaffolds capable of delivering natural drugs and herbs show great promise for tissue regeneration and wound care, particularly in personalized medicine. This study presents the fabrication and characterization of drug-eluting antibacterial core-shell mats composed of polycaprolactone (PCL) and pectin nanofibers produced through coaxial electrospinning. Berberine chloride (BBR), an herbal compound with antineoplastic, anti-inflammatory, antilipidemic, and antidiabetic properties, served as the model drug. Poly(vinyl alcohol) (PVA) was blended with pectin to enhance the mechanical properties of the core fibers. The shell was modified with two-dimensional Ti3C2Tx (MXene) nanosheets and subjected to covalent and ionic cross-linking. Structural analysis confirmed the successful production of bead-free fibers with diameters ranging from 160 to 350 nm, depending on composition. The PCL core fibers were uniformly coated with a pectin/PVA shell approximately 90 nm thick. The inclusion of BBR and MXene increased the fiber diameter. Drug-release kinetics, modeled by using Korsmeyer-Peppas, revealed a two-stage release mechanism. An initial burst release occurred within the first 24 h (kinetic exponent n = 1.36), followed by sustained release over 2 weeks (n = 0.48). The release mechanisms were identified as case-II relaxational release in the first stage, transitioning to quasi-Fickian diffusion in the second. Incorporating MXene into the shell further prolonged drug release. The mechanical strength of the scaffolds improved significantly by a factor of 7 and 4 in wet and dry conditions, respectively. In vitro biocompatibility assays using L929 cells demonstrated excellent cell attachment and compatibility. Additionally, antibacterial tests against Escherichia coli showed that the inclusion of MXene enhanced antibacterial activity by 30%. These results suggest that the functional biocomposite scaffolds hold the potential for developing innovative, drug-eluting wound dressings.

A comprehensive overview of recent progress in MXene-based polymer composites: Their fabrication processes, advanced applications, and prospects

MXenes are a group of 2D transition metal carbonitrides, nitrides and carbides that have become widely recognized as useful materials since they were first discovered in 2011. MXenes, with their exceptional layered structures and splendid external chemistries, have excellent electrical, optical, and thermal properties, making them suitable for catalysis, biomedical uses, environmental remediation, energy storage, and EMI shielding. Over forty MXene compounds with surface terminations like hydroxyl, oxygen, or fluorine are hydrophilic and easily integrated into various applications. Advanced synthesis methods, including selective etching and etchant modifications, have broadened MXene surface chemistries for customized mechanical, thermal, and electrical applications. Integrating MXenes into polymer composites has demonstrated notable promise, enhancing the host polymers' electrical conductivity, thermal stability and mechanical strength. The MXene-polymer composites demonstrate remarkable prospective on behalf of advanced purposes, including flexible electronics, high-performance EMI shielding materials, and lightweight structural components. MXenes have the desirable characteristic of being able to create flexible and translucent films, as well as improve the properties of polymer matrices. This makes them very suitable for use in advanced technological applications. This review summarizes MXene research, methods, and insights, highlighting key discoveries and future directions. This also highlights the importance of ongoing research to fill in the gaps in current knowledge and improve the practical uses of MXenes.

Nacre-like Anisotropic Multifunctional Aramid Nanofiber Composites for Electromagnetic Interference Shielding, Thermal Management, and Strain Sensing

Developing multifunctional flexible composites with high-performance electromagnetic interference (EMI) shielding, thermal management, and sensing capacity is urgently required but challenging for next-generation smart electronic devices. Herein, novel nacre-like aramid nanofibers (ANFs)-based composite films with an anisotropic layered microstructure were prepared via vacuum-assisted filtration and hot-pressing. The formed 3D conductive skeleton enabled fast electron and phonon transport pathways in the composite films. As a result, the composite films showed a high electrical conductivity of 71.53 S/cm and an outstanding thermal conductivity of 6.4 W/m·K when the mass ratio of ANFs to MXene/AgNWs was 10:8. The excellent electrical properties and multi-layered structure endowed the composite films with superior EMI shielding performance and remarkable Joule heating performance, with a surface temperature of 78.3 °C at a voltage of 2.5 V. Additionally, it was found that the composite films also exhibited excellent mechanical properties and outstanding flame resistance. Moreover, the composite films could be further designed as strain sensors, which show great promise in monitoring real-time signals for human motion. These satisfactory results may open up a new opportunity for EMI shielding, thermal management, and sensing applications in wearable electronic devices.

Sandwich-Structured Mxene/Waste Polyurethane Foam Composites For Highly Efficient Electromagnetic Interference, Infrared Shielding and Joule Heating

Electromagnetic interference (EMI) shielding and infrared (IR) stealth materials have attracted increasing attention owing to the rapid development of modern communication and military surveillance technologies. However, to realize excellent EMI shielding and IR stealth performance simultaneously remains a great challenge. Herein, a facile strategy is demonstrated to prepare high-efficiency EMI shielding and IR stealth materials of sandwich-structured MXene-based thin foam composites (M-W-M) via filtration and hot-pressing. In this composite, the conductive Ti3C2Tx MXene/cellulose nanofiber (MXene/CNF) film serves as the outer layer, which reflects electromagnetic waves and reduces the IR emissivity. Meanwhile, the middle layer is composed of a porous waste polyurethane foam (WPUF), which not only improves thermal insulation capacity but also extends electromagnetic wave propagation paths. Owing to the unique sandwich structure of "film-foam-film", the M-W-M composite exhibits a high EMI shielding effectiveness of 83.37 dB, and in the meantime extremely low emissivity (22.17%) in the wavelength range of 7-14 µm and thermal conductivity (0.19 W m-1 K-1), giving rise to impressive IR stealth performance at various surrounding temperatures. Remarkably, the M-W-M composite also shows excellent Joule heating properties, capable of maintaining the IR stealth function during Joule heating.

Ultrafine Aramid Nanofiber-Assisted Large-Area Dense Stacking of MXene Films for Electromagnetic Interference Shielding and Multisource Thermal Conversion

Polymers are often used as adhesives to improve the mechanical properties of flexible electromagnetic interference (EMI) shielding layered films, but the introduction of these insulating adhesives inevitably reduces the EMI performance. Herein, ultrafine aramid nanofibers (UANF) with a diameter of only 2.44 nm were used as the binder to effectively infiltrate and minimize the insulating gaps in MXene films, for balancing the EMI shielding and mechanical properties. Combining the evaporation-induced scalable assembly assisted by blade coating, flexible large-scale MXene/UANF films with highly aligned and compact MXene stacking are successfully fabricated. Compared with the conventional ANF with a larger diameter of 7.05 nm, the UANF-reinforced MXene film exhibits a "brick-mortar" structure with higher orientation and compacter stacking MXene nanosheets, thus showing the higher mechanical properties, electrical conductivity, and EMI shielding performance. By optimizing MXene content, the MXene/UANF film can achieve the optimal tensile strength of 156.9 MPa, a toughness of 2.9 MJ m-3, satisfactory EMI shielding effectiveness (EMI SE) of 40.7 dB, and specific EMI SE (SSE/t) of 22782.4 dB cm2/g). Moreover, the composite film exhibits multisource thermal conversion functions including Joule heating and photothermal conversion. Therefore, the multifunctional MXene/UANF EMI shielding film with flexibility, foldability, and robust mechanical properties shows the practical potential in complex application environments.

Mechanical reinforcement from two-dimensional nanofillers: model, bulk and hybrid polymer nanocomposites

Thanks to their intrinsic properties, multifunctionality and unique geometrical features, two-dimensional nanomaterials have been used widely as reinforcements in polymer nanocomposites. The effective mechanical reinforcement of polymers is, however, a multifaceted problem as it depends not only on the intrinsic properties of the fillers and the matrix, but also upon a number of other important parameters. These parameters include the processing method, the interfacial properties, the aspect ratio, defects, orientation, agglomeration and volume fraction of the fillers. In this review, we summarize recent advances in the mechanical reinforcement of polymer nanocomposites from two-dimensional nanofillers with an emphasis on the mechanisms of reinforcement. Model, bulk and hybrid polymer nanocomposites are reviewed comprehensively. The use of Raman and photoluminescence spectroscopies is examined in light of the distinctive information they can yield upon stress transfer at interfaces. It is shown that the very diverse family of 2D nanofillers includes a number of materials that can attribute distrinctive features to a polymeric matrix, and we focus on the mechanical properties of both graphene and some of the most important 2D materials beyond graphene, including boron nitride, molybdenum disulphide, other transition metal dichalcogenides, MXenes and black phosphorous. In the first part of the review we evaluate the mechanical properties of 2D nanoplatelets in "model" nanocomposites. Next we examine how the performance of these materials can be optimised in bulk nanocomposites. Finally, combinations of these 2D nanofillers with other 2D nanomaterials or with nanofillers of other dimensions are assessed thoroughly, as such combinations can lead to additive or even synergistic mechanical effects. Existing unsolved problems and future perspectives are discussed.

Multifunctional MXene/Carbon Nanotube Janus Film for Electromagnetic Shielding and Infrared Shielding/Detection in Harsh Environments

Multifunctional, flexible, and robust thin films capable of operating in demanding harsh temperature environments are crucial for various cutting-edge applications. This study presents a multifunctional Janus film integrating highly-crystalline Ti3C2Tx MXene and mechanically-robust carbon nanotube (CNT) film through strong hydrogen bonding. The hybrid film not only exhibits high electrical conductivity (4250 S cm-1), but also demonstrates robust mechanical strength and durability in both extremely low and high temperature environments, showing exceptional resistance to thermal shock. This hybrid Janus film of 15 μm thickness reveals remarkable multifunctionality, including efficient electromagnetic shielding effectiveness of 72 dB in X band frequency range, excellent infrared (IR) shielding capability with an average emissivity of 0.09 (a minimal value of 0.02), superior thermal camouflage performance over a wide temperature range (- 1 to 300 °C) achieving a notable reduction in the radiated temperature by 243 °C against a background temperature of 300 °C, and outstanding IR detection capability characterized by a 44% increase in resistance when exposed to 250 W IR radiation. This multifunctional MXene/CNT Janus film offers a feasible solution for electromagnetic shielding and IR shielding/detection under challenging conditions.

Insights on updates in sodium alginate/MXenes composites as the designer matrix for various applications: A review

Advancements in two-dimensional materials, particularly MXenes, have spurred the development of innovative composites through their integration with natural polymers such as sodium alginate (SA). Mxenes exhibit a broad specific surface area, excellent electrical conductivity, and an abundance of surface terminations, which can be combined with SA to maximize the synergistic effect of the materials. This article provides a comprehensive review of state-of-the-art techniques in the fabrication of SA/MXene composites, analyzing the resulting structural and functional enhancements with a specific focus on advancing the design of these composites for practical applications. A detailed exploration of SA/MXene composites is provided, highlighting their utility in various sectors, such as wearable electronics, wastewater treatment, biomedical applications, and electromagnetic interference (EMI) shielding. The review identifies the unique advantages conferred by incorporating MXene in these composites, examines the current challenges, and proposes future research directions to understand and optimize these promising materials thoroughly. The remarkable properties of MXenes are emphasized as crucial for advancing the performance of SA-based composites, indicating significant potential for developing high-performance composite materials.

Recent advances in multifunctional electromagnetic interference shielding materials

Electromagnetic interference (EMI) shielding material is the most effective solution to protect electronic devices and human health from the harmful effects of electromagnetic radiation. The study of EMI shielding materials is intensifying in the constantly developing picture of the fourth industrial revolution. Many EMI shielding materials based on metal, carbon, emerging MXene materials, and their composites have been discovered to utilize the EMI shielding performance. However, a huge demand for compact and multi-functional devices requires the integration of new functions into EMI shielding materials. Multifunctional EMI shielding materials perform multiple functions beyond their main function of EMI shielding in a system due to their specific properties. The additional functions can either naturally exist or be specially engineered. This review summarizes the recent progress of cutting-edge multifunctional EMI shielding materials. The possibility of combining multifunction EMI shielding materials, such as strain sensing, humidity sensing, temperature sensing, thermal management, etc., and the difficulties in balancing EMI shielding performance with other functions are also discussed. Lastly, we point out challenges and propose future directions to develop research on multifunctional EMI shielding materials.

Self-Assembly of Ultrathin, Ultrastrong Layered Membranes by Protic Solvent Penetration

Flexible membranes with ultrathin thickness and excellent mechanical properties have shown great potential for broad uses in solid polymer electrolytes (SPEs), on-skin electronics, etc. However, an ultrathin membrane (<5 μm) is rarely reported in the above applications due to the inherent trade-off between thickness and antifailure ability. We discover a protic solvent penetration strategy to prepare ultrathin, ultrastrong layered films through a continuous interweaving of aramid nanofibers (ANFs) with the assistance of simultaneous protonation and penetration of a protic solvent. The thickness of a pure ANF film can be controlled below 5 μm, with a tensile strength of 556.6 MPa, allowing us to produce the thinnest SPE (3.4 μm). The resultant SPEs enable Li-S batteries to cycle over a thousand times at a high rate of 1C due to the small ionic impedance conferred by the ultrathin characteristic and regulated ionic transportation. Besides, a high loading of the sulfur cathode (4 mg cm-2) with good sulfur utilization was achieved at a mild temperature (35 °C), which is difficult to realize in previously reported solid-state Li-S batteries. Through a simple laminating process at the wet state, the thicker film (tens of micrometers) obtained exhibits mechanical properties comparable to those of thin films and possesses the capability to withstand high-velocity projectile impacts, indicating that our technique features a high degree of thickness controllability. We believe that it can serve as a valuable tool to assemble nanomaterials into ultrathin, ultrastrong membranes for various applications.

Sandwiched film of graphene/silver nanowire conductive layer reinforced by hydroxyethyl cellulose bond layer

Multilayer nanocomposite film made of different materials has multifunctional properties and is applied in the field of flexible electronic devices. Herein, hydroxyethyl cellulose (HEC) and boron nitride nanosheets (BNNS) were used as the matrix and thermal conductivity material of the HEC/BNNS (HB) insulation layer and were combined with conductive blade structure graphene/silver nanowires (GA) film to prepare a three-layer HB/GA20/HB film. Using the high mechanical properties of the HEC based film, the tensile strength of the three-layer film is increased to 22.0 MPa, 633 % higher than that of the pure conductive film. The sensor prepared by multilayer film has good bending sensing performance (1500 cycles) and electromagnetic shielding performance (29.3 dB). The heating temperature of HB/GA20/HB film heater is up to 107.9 °C at 20 V. In the HB/GA20/HB film, the external HB layer provides insulation, thermal conductivity and physical support, and the internal GA layer with good conductive and sensing properties is combined to build a multi-functional sensor, which can be applied as a mobile sensor, heater and electromagnetic shielding material in the flexible wearable field.

Robust and Multifunctional Ti3 C2 Tx /Modified Sawdust Composite Paper for Electromagnetic Interference Shielding and Wearable Thermal Management

Robust, ultrathin, and environmental-friendliness papers that synergize high-efficiency electromagnetic interference (EMI) shielding, personal thermal management, and wearable heaters are essential for next-generation smart wearable devices. Herein, MXene nanocomposite paper with a nacre-like structure for EMI shielding and electrothermal/photothermal conversion is fabricated by vacuum filtration of Ti3 C2 Tx MXene and modified sawdust. The hydrogen bonding and highly oriented structure enhance the mechanical properties of the modified sawdust/MXene composite paper (SM paper). The SM paper with 50 wt% MXene content shows a strength of 23 MPa and a toughness of 13 MJ·M-3 . The conductivity of the SM paper is 10 195 S·m-1 , resulting in an EMI shielding effectiveness (SE) of 67.9 dB and a specific SE value (SSE/t) of 8486 dB·cm2 ·g-1 . In addition, the SM paper exhibits excellent thermal management performance including high light/electro-to-thermal conversion, rapid Joule heating and photothermal response, and sufficient heating stability. Notably, the SM paper exhibits low infrared emissivity and distinguished infrared stealth performance, camouflaging a high-temperature heater surface of 147-81 °C. The SM-based e-skin achieves visualization of Joule heating and realizes human motions monitoring. This work presents a new strategy for designing MXene-based wearable devices with great EMI shielding, artificial intelligence, and thermal management applications.

One-Step Method for Fabricating Janus Aramid Nanofiber/MXene Nanocomposite Films with Improved Joule Heating and Thermal Camouflage Properties

The integration of ultraflexible and mechanically robust films with electric heaters and camouflage technology provides a promising platform for the development of wearable devices, especially for aerospace and military applications. Herein, we present a facile and efficient one-step vacuum-assisted filtration method for fabricating Janus films based on aramid nanofibers (ANF) and Ti3C2Tx (MXene). The ANF/MXene nanocomposite film exhibits remarkable properties, including high conductivity (23809.5 S/m), excellent mechanical strength (102.54 MPa), and outstanding thermal stability (575 °C). Most notably, the Janus ANF/MXene composite film demonstrates superior Joule heating performance with a low driving voltage (1-5 V), high heating temperature (30-276 °C), and rapid response time (within 5 s). Additionally, the film exhibits effective thermal camouflage (72 °C for objects with temperatures above 163 °C) and excellent electromagnetic interference shielding properties (SSE/t = 32475.6 dB cm2/g). These results demonstrate that Janus ANF/MXene films possess a unique combination of thermal camouflage, Joule heating, and electromagnetic interference shielding properties, making them highly promising for wearable devices, high-performance electrical heating, infrared stealth, and security protection applications.

Diverse Structural Design Strategies of MXene-Based Macrostructure for High-Performance Electromagnetic Interference Shielding

There is an urgent demand for flexible, lightweight, mechanically robust, excellent electromagnetic interference (EMI) shielding materials. Two-dimensional (2D) transition metal carbides/nitrides (MXenes) have been potential candidates for the construction of excellent EMI shielding materials due to their great electrical electroconductibility, favorable mechanical nature such as flexibility, large aspect ratios, and simple processability in aqueous media. The applicability of MXenes for EMI shielding has been intensively explored; thus, reviewing the relevant research is beneficial for advancing the design of high-performance MXene-based EMI shields. Herein, recent progress in MXene-based macrostructure development is reviewed, including the associated EMI shielding mechanisms. In particular, various structural design strategies for MXene-based EMI shielding materials are highlighted and explored. In the end, the difficulties and views for the future growth of MXene-based EMI shields are proposed. This review aims to drive the growth of high-performance MXene-based EMI shielding macrostructures on basis of rational structural design and the future high-efficiency utilization of MXene.

Ti3 C2 TX MXene Ink Direct Writing Flexible Sensors for Disposable Paper Toys

Flexible electronics have gained great attention in recent years owing to their promising applications in biomedicine, sustainable energy, human-machine interaction, and toys for children. Paper mainly produced from cellulose fibers is attractive substrate for flexible electronics because it is biodegradable, foldable, tailorable, and light-weight. Inspired by daily handwriting, the rapid prototyping of sensing devices with arbitrary patterns can be achieved by directly drawing conductive inks on flat or curved paper surfaces; this provides huge freedom for children to design and integrate "do-it-yourself (DIY)" electronic toys. Herein, viscous and additive-free ink made from Ti3 C2 TX MXene sediment is employed to prepare disposable paper electronics through a simple ball pen drawing. The as-drawn paper sensors possess hierarchical microstructures with interweaving nanosheets, nanoflakes, and nanoparticles, therefore exhibiting superior mechanosensing performances to those based on single/fewer-layer MXene nanosheets. As proof-of-concept applications, several popular children's games are implemented by the MXene-based paper sensors, including "You say, I guess," "Emotional expression," "Rock-Paper-Scissors," "Arm wrestling," "Throwing game," "Carrot squat," and "Grab the cup," as well as a DIY smart whisker for a cartoon mouse. Moreover, MXene-based paper sensors are safe and disposable, free from producing any e-waste and hazard to the environment.

Emerging Two-Dimensional Materials for Electromagnetic Interference Shielding Application

Graphene is the first two-dimensional material that becomes the center material in various research areas of material science, chemistry, condensed matter, and engineering due to its advantageous properties, including larger specific area, lower density, outstanding electrical conductivity, and ease of processability. These properties attracted the attention of material researchers that resulted in a large number of publications on EMI shielding in a short time and play a central role in addressing the problems and challenges faced in this modern era of electronics by electromagnetic interference. After the popularity of graphene, the community of material researchers investigated other two-dimensional materials like MXenes, hexagonal boron nitride, black phosphorous, transition metal dichalcogenides, and layered double hydroxides, to additionally enhance the EMI shielding response of materials. The present article conscientiously reviews the current progress in EMI shielding materials in reference to two-dimensional materials and addresses the future challenges and research directions to achieve the goals.

MXene/graphene oxide nanocomposites for friction and wear reduction of rough steel surfaces

Development of solid lubricant materials that render reliable performance in ambient conditions, are amenable to industrial size and design complexities, and work on engineered surfaces is reported. These coatings are composed of Ti3C2Tx-Graphene Oxide blends, spray-coated onto bearing steel surfaces. The tribological assessment was carried out in ambient environmental conditions and high contact pressures in a ball-on-disc experimental set-up. The evaluation yielded that the use of Ti3C2Tx-Graphene-Oxide coatings led to substantial reduction in friction down to 0.065 (at 1 GPa contact pressure and 100 mm/s) in comparison to the uncoated of single-component-coated surfaces, surpassing the state-of-the-art. The coatings also provided excellent protection against wear loss of the substrate and counter-face. The results were explained based on the observations from Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and nanoindentation measurements. In operando formation of a dense, hard and stiff, dangling-bond-saturated tribolayer was observed to be the reason for the sustained lubricity even at high test loads and sliding speeds. This report presents the holistic exploration and correlation of structure-property-processing pertaining to the advancement of solid lubrication science.

Recent progress in energy, environment, and electronic applications of MXene nanomaterials

Since the discovery of graphene, two-dimensional (2D) materials have gained widespread attention, owing to their appealing properties for various technological applications. Etched from their parent MAX phases, MXene is a newly emerged 2D material that was first reported in 2011. Since then, a lot of theoretical and experimental work has been done on more than 30 MXene structures for various applications. Given this, in the present review, we have tried to cover the multidisciplinary aspects of MXene including its structures, synthesis methods, and electronic, mechanical, optoelectronic, and magnetic properties. From an application point of view, we explore MXene-based supercapacitors, gas sensors, strain sensors, biosensors, electromagnetic interference shielding, microwave absorption, memristors, and artificial synaptic devices. Also, the impact of MXene-based materials on the characteristics of respective applications is systematically explored. This review provides the current status of MXene nanomaterials for various applications and possible future developments in this field.

Structure Design and Processing Strategies of MXene-Based Materials for Electromagnetic Interference Shielding

The development of new materials for electromagnetic interference (EMI) shielding is an important area of research, as it allows for the creation of more effective and high-efficient shielding solutions. In this sense, MXenes, a class of 2D transition metal carbides and nitrides have exhibited promising performances as EMI shielding materials. Electric conductivity, low density, and flexibility are some of the properties given by MXene materials, which make them very attractive in the field. Different processing techniques have been employed to produce MXene-based materials with EMI shielding properties. This review summarizes processes and the role of key parameters like the content of fillers and thickness in the desired EMI shielding performance. It also discusses the determination of power coefficients in defining the EMI shielding mechanism and the concept of green shielding materials, as well as their influence on the real application of a produced material. The review concludes with a summary of current challenges and prospects in the production of MXene materials as EMI shields.

Synthesis and applications of MXene-based composites: a review

Recently, there has been considerable interest in a new family of transition metal carbides, carbonitrides, and nitrides referred to as MXenes (Ti₃C₂T_x) due to the variety of their elemental compositions and surface terminations that exhibit many fascinating physical and chemical properties. As a result of their easy formability, MXenes may be combined with other materials, such as polymers, oxides, and carbon nanotubes, which can be used to tune their properties for various applications. As is widely known, MXenes and MXene-based composites have gained considerable prominence as electrode materials in the energy storage field. In addition to their high conductivity, reducibility, and biocompatibility, they have also demonstrated outstanding potential for applications related to the environment, including electro/photocatalytic water splitting, photocatalytic carbon dioxide reduction, water purification, and sensors. This review discusses MXene-based composite used in anode materials, while the electrochemical performance of MXene-based anodes for Li-based batteries (LiBs) is discussed in addition to key findings, operating processes, and factors influencing electrochemical performance.

Flexible and Ultrathin Graphene/Aramid Nanofiber Carbonizing Films with Nacre-like Structures for Heat-Conducting Electromagnetic Wave Shielding/Absorption

Electromagnetic interference (EMI) shielding and electromagnetic wave absorption (EWA) materials with good thermal management and flexibility properties are urgently needed to meet the more complex modern service environment, especially in the field of smart wearable electronics. How to balance the relation of electromagnetic performance, thermal management, flexibility, and thickness in material design is a crucial challenge. Herein, graphene nanosheets/aramid nanofiber (C-GNS/ANF) carbonizing films with nacre-like structures were fabricated via the blade-coating/carbonization procedure. The ingenious configuration from highly ordered alignment GNS interactively connected by a carbonized ANF network can effectively improve the thermal/electrical conductivity of a C-GNS/ANF film. Specifically, the ultrathin C-GNS/ANF film with a thickness of 17 μm shows excellent in-plane thermal conductivity (TC) of 79.26 W m^-1 K^-1 and superior EMI shielding up to 56.30 dB. Moreover, the obtained C-GNS/ANF film can be used as a lightweight microwave absorber, achieving excellent microwave absorption performance with a minimum reflection loss of -56.07 dB at a thickness of 1.5 mm and a maximum effective absorption bandwidth of 5.28 GHz at an addition of only 5 wt %. Furthermore, the C-GNS/ANF films demonstrate good flexibility, outstanding thermal stability, and flame retardant properties. Overall, this work indicates a prospective direction for the development of the next generation of electromagnetic wave absorption/shielding materials with high-performance heat conduction.

Progress of high performance Ti3C2Tx MXene nanocomposite films for electromagnetic interference shielding

With the rapid growth of 5G communication technology, it is imperative to produce electromagnetic interference (EMI) shielding materials to combat the growing electromagnetic radiation pollution. For new shielding applications, EMI shielding materials with high flexibility, light weight and good mechanical strength are in high demand. Due to their light weight, high flexibility, excellent EMI shielding performance, high mechanical properties, and multifunctionality, Ti₃C₂T_x MXene nanocomposite films have shown absolute benefits in EMI shielding in recent years. Consequently, numerous lightweight and flexible high-performance Ti₃C₂T_x MXene nanocomposite films have been generated quickly. In this article, we discuss not only the present state of EMI shielding material research, but also the synthesis and electromagnetic properties of Ti₃C₂T_x MXene. In addition, the loss mechanism of EMI shielding is described, with an emphasis on the analysis and summary of the research progress of diverse layer structured Ti₃C₂T_x MXene nanocomposite films for EMI shielding. Finally, the current issues of design and fabrication for Ti₃C₂T_x MXene nanocomposite films that need to be addressed are proposed, as well as the future research direction for Ti₃C₂T_x MXene nanocomposite films.

Functional and Structural Facts of Effective Electromagnetic Interference Shielding Materials: A Review

Electromagnetic interference (EMI) shielding effectiveness (SE) systems have received immense attention from researchers owing to the rapid development in electronics and telecommunications, which is an alarming matter in our modern society. This radiation can damage the performance of EM devices and may harmfully affect animal/human health. The harmonious utilization of magnetic alloys and conducting but nonmagnetic materials (such as carbon/graphene) is a practical approach toward EMI SE. This review is not exhaustive, although it is comprehensive and aimed at all materials for EMI SE especially graphene-based polymeric composites. It encompasses multifunctional and functional structural EMI shields. These materials comprise polymers, carbons, ceramics, metals, cement composites/nanocomposites, and hybrids. The accessibility of abundant categories of carbon-based materials in their microscale, nanoscale, and quantum forms as EMI shields as polymer-carbon, cement-carbon, ceramic-carbon, metal-carbon, and their hybrids, makes them receive much attention, as a result of their unique amalgamation of electrical, magnetic, dielectric, thermal, and/or mechanical properties. Herewith, we have discussed the principles of EMI shields along with their design and state of the art basis and material architecture along with the drawbacks in research on EMI shields.

A high-performance, oxidation resistance and flexible Zn@MXene/cellulose nanofibers electromagnetic shielding film

Next-generation wearable electromagnetic interference (EMI) materials need to be provided with oxidation resistance, lightness, and flexibility. In this study, a high-performance EMI film with synergistic enhancement of Zn²⁺@Ti₃C₂T _x MXene/cellulose nanofibers (CNF) was found. The unique Zn@Ti₃C₂T _x MXene/CNF heterogeneous interface facilitates the loss of interface polarization, making the total electromagnetic shielding effectiveness (EMI SE_T) and shielding effectiveness per unit thickness (SE/d) of the films reach 60.3 dB and 5025 dB mm^-1, respectively, in the X-band at the thickness of 12 μm ± 2 μm, significantly exceeding that of other MXene-based shielding materials. In addition, the coefficient of absorption gradually increases with the increasing CNF content. Moreover, under the synergistic effect of Zn²⁺, the film shows excellent oxidation resistance (maintaining stable performance after 30 days), greatly exceeding the previous test cycle. Furthermore, the mechanical performance and flexibility of the film are greatly enhanced (tensile strength at 60 MPa, and maintaining stable performance after 100 times bending tests) due to the CNF and hot-pressing process. Therefore, with the enhancement of the EMI performance, high flexibility and oxidation resistance under high temperature and high humidity conditions, the as-prepared films have wide practical significance and broad application prospects in a series of complex applications, such as flexible wearable fields, ocean engineering fields and high-power device packaging fields.

High-strength, low infrared-emission nonmetallic films for highly efficient Joule/solar heating, electromagnetic interference shielding and thermal camouflage

High-strength nonmetallic materials with low infrared (IR) emission are rare in nature, yet highly anticipated especially in military and aerospace fields for thermal camouflage, IR stealth, energy-saving heating. Here, we reported a high-strength (422 MPa) nonmetallic film with very low IR emissivity (12%), realized by constructing alternating multilayered structures consisting of successive MXene functionalized outer layers and continuous GO reinforced inner layers. This nonmetallic film is capable of competing with typical stainless steel (415 MPa, 15.5%), and exhibits remarkable thermal camouflage performance (ΔT = 335 °C), ultrahigh Joule heating capability (350 °C at 2 V), excellent solar-to-thermal conversion efficiency (70.2%), and ultrahigh specific electromagnetic interference shielding effectiveness (83 429 dB cm^-1). Impressively, these functionalities can be maintained well after prolonged outdoor aging, and even after undergoing harsh application conditions including strong acid/alkali and boiling water immersion, and cryogenic (-196 °C) temperature.

Hyperelastic Kevlar Nanofiber Aerogels as Robust Thermal Switches for Smart Thermal Management

Aerogels, the lightest artificial solid materials characterized by low density and thermal conductivity, high porosity, and large specific surface area, have attracted increasing interest. Aerogels exhibit single-mode thermal insulation properties regardless of the surrounding temperature. In this study, hyperelastic Kevlar nanofiber aerogels (HEKAs) are designed and fabricated by a slow-proton-release-modulating gelation and thermoinduced crosslinking strategy. The method does not use crosslinking agents and endows the ultralow-density (4.7 mg cm^-3 ) HEKAs with low thermal conductivity (0.029 W m^-1 K^-1 ), high porosity (99.75%), high thermal stability (550 °C), and increased compression resilience (80%) and fatigue resistance. Proofs of the concept of the HEKAs acting as on-off thermal switches are demonstrated through experiments and simulations. The thermal switches exhibit a rapid thermal response speed of 0.73 °C s^-1 , high heat flux of 2044 J m^-2 s^-1 , and switching ratio of 7.5. Heat dissipation can be reversibly switched on/off more than fifty times owing to the hyperelasticity and fatigue resistance of the HEKAs. This study suggests a route to fulfill the hyperelasticity of highly porous aerogels and to tailor heat flux on-demand.

Advanced perspectives on MXene composite nanomaterials: Types synthetic methods, thermal energy utilization and 3D-printed techniques

MXene, 2D material, can be synthesized as single flake with 1 nm thickness by using phase change material, polymer and graphene oxide. Meanwhile, the MXene and its composite derivative materials have been applied widely in electro-to-thermal conversion, photo-to-thermal conversion, thermal energy storage, and 3D printing ink aspects. Furthermore, the forward-looking utilization of the MXene nanomaterials in hydrogen energy storage, radio frequency field application, CO₂ capture and remediation of environmental pollution, is explored. This article reveals that the efficiencies of the photo-to-thermal and electro-to-thermal energy conversions with the MXene nanomaterials could reach about 80-90%. In parallel, it is demonstrated that the MXene printed ink has the excellent rheological property and high viscosity and stability of liquid, which contribute to arranging the multi-dimensional architectures with functional materials and controlling the flow rate of the MXene ink in the range of 0.03-0.15 mL/min for speedily printing and various printing structures.

2D MXene Ti3C2T x nanosheets in the development of a mechanically enhanced and efficient antibacterial dental resin composite

The bacterial accumulation at the margins of dental resin composites is a main cause of secondary caries, which may further lead to prosthodontic failure. In this regard, this study for the first time incorporated 2D MXene Ti₃C₂T_x nanosheets (NSs) into epoxy resin at different mass ratios (0, 0.5, 1.0, and 2.0 wt%) by solution blending and direct curing for dental applications. Compared to the pure resin, the as-fabricated MXene/resin composite not only exhibited improved mechanical and abrasive results but also displayed gradually improved antibacterial activity with MXene loading which was further enhanced by illumination in natural light due to the high photothermal efficiency of MXene. In addition, the cytotoxicity result demonstrated that the MXene-modified resin did not cause severe damage to normal cells. This novel MXene/resin nanocomposite could pave the way for new designs for high-performance, multifunctional nanocomposites to effectively protect dental health in daily life.

Bicontinuous, High-Strength, and Multifunctional Chemical-Cross-Linked MXene/Superaligned Carbon Nanotube Film

Lightweight, thin, large-area, and ultraflexible chemical-cross-linked MXene/superaligned carbon nanotube composite films with a bicontinuous structure are manufactured. The films exhibit high mechanical strength, good electrical conductivity, hydrophobicity, and oxidation stability, as well as wearable multifunctionalities involving electromagnetic interference (EMI) shielding, electrothermal conversion, and photothermal antibacterial performance. An X-band EMI shielding effectiveness (SE) of 24 to 70 dB at the thickness of 8 to 28 μm and an SE of more than 60 dB in ultrabroadband frequency range of 8.2-40 GHz are accomplished. A surface specific SE of 122 368 dB·cm²·g^-1 is achieved, significantly outperforming other typical shields reported. The good electro-/photothermal performance of the films leads to high-efficiency deicing and antibacterial performance. Combined with the efficient and scalable manufacturing approach, the multifunctional wearable bicontinuous films show great potential for applications in wearable devices, defense, antibacterials, and the Internet of Things.

Significantly Enhanced Electromagnetic Interference Shielding Performances of Epoxy Nanocomposites with Long-Range Aligned Lamellar Structures

High‑efficiency electromagnetic interference (EMI) shielding materials are of great importance for electronic equipment reliability, information security and human health. In this work, bidirectional aligned Ti₃C₂T_x@Fe₃O₄/CNF aerogels (BTFCA) were firstly assembled by bidirectional freezing and freeze-drying technique, and the BTFCA/epoxy nanocomposites with long-range aligned lamellar structures were then prepared by vacuum-assisted impregnation of epoxy resins. Benefitting from the successful construction of bidirectional aligned three-dimensional conductive networks and electromagnetic synergistic effect, when the mass fraction of Ti₃C₂T_x and Fe₃O₄ are 2.96 and 1.48 wt%, BTFCA/epoxy nanocomposites show outstanding EMI shielding effectiveness of 79 dB, about 10 times of that of blended Ti₃C₂T_x@Fe₃O₄/epoxy (8 dB) nanocomposites with the same loadings of Ti₃C₂T_x and Fe₃O₄. Meantime, the corresponding BTFCA/epoxy nanocomposites also present excellent thermal stability (T_{heat-resistance index} of 198.7 °C) and mechanical properties (storage modulus of 9902.1 MPa, Young's modulus of 4.51 GPa and hardness of 0.34 GPa). Our fabricated BTFCA/epoxy nanocomposites would greatly expand the applications of MXene and epoxy resins in the fields of information security, aerospace and weapon manufacturing, etc.

Multifunctional MXene/Aramid Nanofiber Composite Films for Efficient Electromagnetic Interference Shielding and Repeatable Early Fire Detection

Rapid development of highly integrated electronic and telecommunication devices has led to urgent demands for electromagnetic interference (EMI) shielding materials that incorporate flame retardancy, and more desirably the early fire detection ability, due to the potential fire hazards caused by heat propagation and thermal failure of the devices during operation. Here, multifunctional flexible films having the main dual functions of high EMI shielding performance and repeatable fire detection ability are fabricated by vacuum filtration of the mixture of MXene and aramid nanofiber (ANF) suspensions. ANFs serve to reinforce MXene films via the formation of hydrogen bonding between the carbonyl groups of ANFs and the hydroxyl groups of MXene. When the ANF content is 20 wt %, the tensile strength of the film is increased from 24.6 MPa for a pure MXene film to 79.5 MPa, and such a composite film (9 μm thickness) exhibits a high EMI shielding effectiveness (SE) value of ∼40 dB and a specific SE (SSE) value of 4361.1 dB/mm. Upon fire exposure, the composite films can trigger the fire detection system within 10 s owing to the thermoelectric property of MXene. The self-extinguishing feature of ANFs ensures the structural integrity of the films during burning, thus allowing for continuous alarm signals. Moreover, the films also exhibit excellent Joule heating and photothermal conversion performances with rapid response and sufficient heating reliability.

The Joule Heating Effect of a Foldable and Cuttable Sheet Made of SWCNT/ANF Composite

A foldable and cuttable sheet heater was fabricated using single-walled carbon nanotubes (SWCNTs) and aramid nanofibers (ANFs). SWCNTs are particularly well suited for Joule heating based on their high thermal stability, electrical properties, high current density, and aspect ratio. When the SWCNT/ANF composite reaches a high temperature during Joule heating, ANFs will endure this temperature due to their impressive thermal stability, derived from aramid fibers. With the aim of achieving a synergistic effect between the SWCNTs and ANFs, 0-100 wt% SWCNT/ANF composite sheets were fabricated by tip-type sonication and vacuum filtration. After assessing the thermal stability and electrical properties of the composite sheets, the Joule heating effect was analyzed. TGA showed that our sheet had high thermal stability in an air condition up to around 500 °C. The electrical conductivity of the composite sheet was improved as the amount of SWCNT added rose to 790.0 and 747.5 S/cm in the 75 and 100_SWCNTs/ANF, respectively. The maximum heating temperature, up to 280 °C, reached by Joule heating was measured as a function of SWCNT content and input voltage, and the relationship among SWCNT content, input voltage, heating temperature, and electric power was described. Mechanical properties were also measured in a temperature range similar to the heating temperature of 300 °C reached by Joule heating. Ultimately, we obtained a foldable and cuttable composite sheet with a stretchable structure, capable of being molded into a variety of shapes. This energy-efficient material can potentially be employed in any device in which a heater is required to deliver high temperatures.

A flexible, robust and multifunctional montmorillonite/aramid nanofibers@MXene electromagnetic shielding nanocomposite with an alternating structure for enhanced Joule heating and fire-resistant protective performance

With the rapidly increasing development of portable devices and flexible electronic devices, multifunctional composites with excellent mechanical strength, great electromagnetic interference shielding, great Joule heating performance and strong fire-resistant protective performance are noticeably required. Herein, inspired by the sandwich structure, we have designed a montmorillonite/aramid nanofibers@MXene (MMT/ANFs@MXene) nanocomposite with an alternating multilayered structure via a simple AVF process. In this nanocomposite, the ANFs/MMT (AT) layer acts as a mechanically reinforced and insulation protection layer, while the MXene layer maintains a complete conductive network. The superior alternating multilayered structure endows the nanocomposite with outstanding mechanical properties (154.66 MPa, 14.22%) and excellent EMI shielding effectiveness values (58.4 dB). In addition, the fire-resistant protective performance of the nanocomposite improves its safety and reliability, especially, the EMI shielding effectiveness is maintained at ∼34 dB after burning for 30 s. Besides, the MMT/ANFs@MXene nanocomposite shows excellent Joule heating performance with a fast thermal response, low driving voltage and long-time temperature stability, which could reach 110.2 °C at only 3 V applied voltage within 10 s. As a result, this work presents a novel strategy for constructing multifunctional composites with outstanding overall performance, which will broaden application areas and prospects in thermal management and EMI shielding in wearable products.

Rheology-Guided Assembly of a Highly Aligned MXene/Cellulose Nanofiber Composite Film for High-Performance Electromagnetic Interference Shielding and Infrared Stealth

Delicately aligned structures of two-dimensional (2D) MXene nanosheets have demonstrated positive effects on applications, especially in electromagnetic interference (EMI) shielding and infrared (IR) stealth. However, precise regulation of structural assembly by theory-guided solution processing is still a great challenge. Herein, one-dimensional (1D) cellulose nanofibers (CNFs) with a high aspect ratio are applied as a reinforcing agent and a rheological modifier for MXene/CNF colloids to fabricate aligned MXene-based materials for EMI shielding and IR stealth. Notably, a systematical rheological study of the MXene/CNF colloids is proposed to determine the optimal solution-processing conditions for finely oriented component arrangement requirements and provides in-depth information on the interactions between the components. The delicately regulated orientation structure assembled by shear inducement is convincingly demonstrated through micro-CT and wide-angle X-ray diffraction/small-angle X-ray scattering (WAXD/SAXS), which endows the MXene/CNF film with a significantly enhanced electrical conductivity of 46 685 S m^-1, a tensile strength of 281.7 MPa, and Young's modulus of 14.8 GPa. Furthermore, the highly aligned structure of the ultrathin film possesses a great enhancement in EMI shielding effectiveness (50.2 dB) and IR stealth (0.562 emissivity). These findings provide a fruitful understanding of the optimized fabrication in solution processing of high-performance MXene-based functional composite films and open up a great opportunity for the development of multifunctional stealth materials.

MXene based nanocomposite films

Since the first report in 2011, two-dimensional transition metal carbide/nitride MXenes have aroused widespread attention owing to the particular structure and physiochemical properties. In the last few years, MXene-based nanocomposite films have been widely investigated, showing promising applications in many fields. However, poor mechanical properties and thermal/electrical conductivities of MXene-based nanocomposite films still limited their practical applications. Herein, we summarize the fabrication approach of MXene-based nanocomposite films and discuss the mechanical properties and other applications, including electromagnetic interference shielding, thermal conductivity, and supercapacitors. Then, several vital factors for fabricating high performance MXene based nanocomposite films have been refined. To further fabricate high performance MXene-based nanocomposite films, some effective sequential bridging strategies are also discussed. Lastly, a conclusion of the challenges and opportunities of MXene-based nanocomposite films is provided to facilitate their development and application for various purposes in the future of scientific research.

Bridging Sheet Size Controls Densification of MXene Films for Robust Electromagnetic Interference Shielding

Numerous voids among the incompact layer-structure of MXene films result in their low ambient stability and poor innate conductivity for electromagnetic interference (EMI) shielding. Herein, we report a bridging-sheet-size-controlled densification process of MXene films by applying graphene oxide (GO) as a bridging agent. Specifically, the sheet size of GO is tailored to quantify a negative correlation of sheet size with densification for directing the preparation of most compact MXene-GO films. Benefiting from the shortest electron-transport-distance in the most compact structure, the conductivity of the MXene-GO film achieves 1.7 times (∼1.6 × 10⁵ S/m) that of MXene film. The EMI shielding performance (5.2 × 10⁶ dB/m) reaches the record-value among reported MXene films at 10 μm-scale thickness. Moreover, the compact structure boosts the ambient stability of MXene-GO films where the conductivity and EMI shielding performance remain 88.7% and 90.0% after 15 days, respectively. The findings rationale the structure-activity relationship of compact MXene films for flexible electronics.

•

Densification of MXene films is controlled by a bridging-sheet-size strategy

•

Shortening electron-transport-distance in compact structure improves conductivity

•

Control of densification delivers high EMI shielding performance and air stability

Ultrastrong and Hydrophobic Sandwich-Structured MXene-Based Composite Films for High-Efficiency Electromagnetic Interference Shielding

Electromagnetic interference (EMI) shielding materials are highly necessary to solve the problem of electromagnetic radiation. Transition-metal carbide/nitride (MXene) materials offer great potential for the construction of high-performance EMI shields because of their high electrical conductivity and versatile surface chemistry. However, MXene generally suffers from poor mechanical and oxidation-resistant properties, which hinders its practical applications. Herein, flexible, strong, and hydrophobic sandwich-structured composite films (H-S-MXene), consisting of a conductive MXene layer and supporting aramid nanofiber layer, were fabricated using step-by-step vacuum-assisted filtration and dip coating. Given the unique sandwich structure, hydrogen bonding interactions, and covalent cross-linking of the MXene sheets, the H-S-MXene composite films demonstrated simultaneously excellent EMI shielding and mechanical properties. The EMI shielding effectiveness of the H-S-MXene composite film with 20 wt % MXene content reached 46.1 dB at thickness of 23.2 ± 0.5 μm, and the tensile strength of the film reached 302.1 MPa, which outperformed other reported EMI shielding materials. The excellent mechanical flexibility and hydrophobicity of the H-S-MXene composite films ensured a stable EMI shielding performance, which could withstand cycled bending, torsion, and exposure to aqueous environments. These impressive features made the H-S-MXene composite films promising candidates for electronic devices and aerospace. This study provides important guidance for the rational design of stable MXene-based composites with advanced properties.