CO2 fixation: cycloaddition of CO2 to epoxides using practical metal-free recyclable catalysts

The conversion of CO2 into valuable chemicals is a crucial field of research. Cyclic organic carbonates have attracted great interest because they can be prepared under mild conditions and because of their structural versatility which enables a large variety of applications. Therefore, there is a need for potent and yet practical catalysts for the cycloaddition of CO2 to cyclic carbonates that are able to combine availability, low cost and an adequate performance. We review here several recyclable catalytic systems that are readily available, easy to prepare, and inexpensive with an eye to the future development of more efficient practical catalysts through the provided guidelines.

Samarium- and Ytterbium-Grafted Periodic Mesoporous Silica for Carbon Dioxide Capture and Conversion

Immobilized coordination compounds of Lewis acidic metals are powerful catalytic components of systems for the cycloaddition of CO2 to epoxides that do not require sophisticated coordination frameworks to harness the metal center and modulate its activity. Surface organometallic chemistry (SOMC) is a valuable methodology to prepare well-defined and site-isolated surface complexes and coordination compounds on metal oxides, with ligand environments easily adjustable to a targeted catalytic reaction. In this work, the SOMC methodology is applied to prepare SmII, YbII, and SmIII alkoxide surface complexes on periodic mesoporous (organo)silica of distinct pore symmetry/size for application in the CO2 cycloaddition reaction. The surface complexes are readily accessible by the grafting of the bis(trimethylsilyl)amide precursors LnII[N(SiMe3)2]2(THF)2 (Ln = Sm, Yb) and SmIII[N(SiMe3)2]3, followed by ligand exchange with alcohols (ethanol and neopentanol). The use of periodic mesoporous supports led to hybrid materials with relatively high surface areas and pore sizes, affording good performance in CO2 capture and in the cycloaddition of CO2 to epoxides under mild conditions (60-80 °C, 1-10 bar). In terms of catalytic performance, recyclability, and low amount of added nucleophile TBAX (X = Br, I), the most active materials prepared in this work compare well to a variety of previously reported SOMC-derived surface complexes and to other heterogeneous Lewis acids displaying more elaborate ligand environments.

Synthesis of cyclic carbonates from CO2 cycloaddition to bio-based epoxides and glycerol: an overview of recent development

Anthropogenic carbon dioxide (CO₂) emissions contribute significantly to global warming and deplete fossil carbon resources, prompting a shift to bio-based raw materials. The two main technologies for reducing CO₂ emissions are capturing and either storing or utilizing it. However, while capture and storage have high reduction potential, they lack economic feasibility. Conversely, by utilizing the CO₂ captured from streams and air to produce valuable products, it can become an asset and curb greenhouse gas effects. CO₂ is a challenging C1-building block due to its high kinetic inertness and thermodynamic stability, requiring high temperature and pressure conditions and a reactive catalytic system. Nonetheless, cyclic carbonate production by reacting epoxides and CO₂ is a promising green and sustainable chemistry reaction, with enormous potential applications as an electrolyte in lithium-ion batteries, a green solvent, and a monomer in polycarbonate production. This review focuses on the most recent developments in the synthesis of cyclic carbonates from glycerol and bio-based epoxides, as well as efficient methods for chemically transforming CO₂ using flow chemistry and novel reactor designs.

Organocatalytic Polymers from Affordable and Readily Available Building Blocks for the Cycloaddition of CO2 to Epoxides

The catalytic cycloaddition of CO₂ to epoxides to afford cyclic carbonates as useful monomers, intermediates, solvents, and additives is a continuously growing field of investigation as a way to carry out the atom-economic conversion of CO₂ to value-added products. Metal-free organocatalytic compounds are attractive systems among various catalysts for such transformations because they are inexpensive, nontoxic, and readily available. Herein, we highlight and discuss key advances in the development of polymer-based organocatalytic materials that match these requirements of affordability and availability by considering their synthetic routes, the monomers, and the supports employed. The discussion is organized according to the number (monofunctional versus bifunctional materials) and type of catalytically active moieties, including both halide-based and halide-free systems. Two general synthetic approaches are identified based on the postsynthetic functionalization of polymeric supports or the copolymerization of monomers bearing catalytically active moieties. After a review of the material syntheses and catalytic activities, the chemical and structural features affecting catalytic performance are discussed. Based on such analysis, some strategies for the future design of affordable and readily available polymer-based organocatalysts with enhanced catalytic activity under mild conditions are considered.

Nanomaterials as a sustainable choice for treating wastewater

Wastewater containing toxic substances is a major threat to the health of both aquatic and terrestrial ecosystems. In order to treat wastewater, nanomaterials are currently being studied intensively due to their unprecedented properties. The unique features of nanoparticles are prompting an increasing number of studies into their use in wastewater treatment. Although several studies have been undertaken in recent years, most of them did not focus on some of the nanomaterials that are now often utilized for wastewater treatment. It is essential to investigate the most recent advances in all the types of nanomaterials that are now frequently employed for wastewater treatment. The recent advancements in common nanomaterials used for sustainable wastewater treatment is comprehensively reviewed in this paper. This paper also thoroughly assesses unique features, proper utilization, future prospects, and current limitations of green nanotechnology in wastewater treatment. Zero-valent metal and metal oxide nanoparticles, especially iron oxides were shown to be more effective than traditional carbon nanotubes (CNTs) for recovering heavy metals in wastewater. Iron oxide achieved 75.9% COD (chemical oxygen demand) removal efficiency while titanium oxide (TiO₂) achieved 75.5% COD. Iron nanoparticles attained 72.1% methyl blue removal efficiency. However, since only a few types of nanomaterials have been commercialized, it is important to also focus on the economic feasibility of each nanomaterial. This study found that the large surface area, high reactivity, and strong mechanical properties of nanoparticles means they can be considered as a promising option for successful wastewater treatment.

Hydrophobically-enhanced "on water" cycloaddition of CO2 to long-chain terminal epoxides

Long-chain cyclic carbonates (LC-CC) are attractive building blocks and non-ionic surfactants. We demonstrate a convenient methodology to prepare LC-CC in miniemulsions of epoxide droplets in water. The pre-organization and confinement of the reagents from H-bond and hydrophobic interactions allow the target process to proceed at mild temperatures under atmospheric CO₂.

Simple carbonaceous-material-loaded mesoporous SiO2 composite catalyst for epoxide-CO2 cycloaddition reaction

In this paper, a novel arginine-glucose derived carbonaceous-material-loaded SiO₂ composite catalyst (Ar-G-CM/SiO₂) was synthesized from non-toxic and harmless reagents (arginine, glucose and tetraethylorthosilicate) by simple hydrothermal process. Mesoporous SiO₂ with high specific area served as support for carbonaceous material and provided extra hydrogen bond donor (HBD) groups. Ar-G-CM/SiO₂ with acid-base dual functional groups (COOH, NH₂) and HBD group (OH) presented 62% yield and 99% selectivity to product of propylene carbonate in CO₂ cycloaddition reaction with propylene oxide even at 40 °C, 2 MPa under metal-absent and solvent-free conditions. For some less active epoxides with steric hindrance, Ar-G-CM/SiO₂ also showed good yield and selectivity over 90% by raising temperature to 120 °C. Furthermore, the Ar-G-CM/SiO₂ catalyst could be reused for six successive cycles without significant decrease in catalytic activity or structural deterioration, because the carbon deposition was restrained owing to the mesoporous structure of the catalyst.

Dataset for the synthesis and application of single-component heterogeneous catalysts based on zinc and tin for the cycloaddition of pure, diluted, and impure CO2 to epoxides under mild conditions

The cycloaddition of CO₂ to epoxides under mild conditions is a growing field of research and a viable strategy to recycle CO₂ in the form of cyclic carbonates as useful intermediates, solvents, and additives. This target requires readily accessible and recyclable catalysts whose synthesis does not involve expensive monomers, multistep procedures, coupling reagents, etc. Additionally, the catalysts should be active under atmospheric pressure and tolerate impurities such as methane and H₂S. In a recent manuscript (Rational engineering of single-component heterogeneous catalysts based on abundant metal centers for the mild conversion of pure and impure CO₂ to cyclic carbonates;Chemical Engineering Journal 422 (2021) 129930) we have developed strategies to prepare efficient heterogeneous catalysts for the cycloaddition reaction of CO₂ to epoxides. Such materials consist of dispersions of metal halides (ZnCl₂ or SnCl₄) on silica support that is further functionalized with ionic liquids bearing nucleophilic halide moieties for cooperative epoxide activation and ring-opening. Herein, we provide useful complementary data for the characterization of the prepared materials in the form of: SEM images of materials (SEM: scanning electron microscope), SEM-EDS images of materials (EDS: Energy-dispersive X-ray spectroscopy), TEM images of materials (TEM: transmission electron microscope); XPS (X-ray photoelectron spectroscopy) survey spectra of most active catalysts and related high-resolution spectra in spectral regions of interest, BET (Brunauer–Emmett–Teller) physisorption isotherms of materials, raw ¹H NMR spectra of catalytic reactions to verify the reproducibility of the reaction outcome and identify the reaction products.

Cycloaddition of CO2 to epoxides by highly nucleophilic 4-aminopyridines: establishing a relationship between carbon basicity and catalytic performance by experimental and DFT investigations

New highly nucleophilic homogeneous and heterogeneous catalysts based on the 3,4-diaminopyridine scaffold are reported for the halogen-free cycloaddition of CO₂ to epoxides.

Intertwined chemistry of hydroxyl hydrogen-bond donors, epoxides and isocyanates in the organocatalytic synthesis of oxazolidinones versus isocyanurates: rational catalytic investigation and mechanistic understanding

The efficiency and chemoselectivity of the cycloaddition of isocyanates to epoxides to afford oxazolidinones were investigated using hydroxyl hydrogen-bond donors as organocatalysts.

B-Doped and NH2-functionalized SBA-15 with hydrogen bond donor groups for effective catalysis of CO2 cycloaddition to epoxides

The novel B-SBA-15-NH₂ catalyst with Lewis acid–base properties and hydrogen bond donor groups exhibited good catalytic performance for CO₂ conversion under metal- and solvent-free conditions.

Dual hydrogen-bond donor group-containing Zn-MOF for the highly effective coupling of CO2 and epoxides under mild and solvent-free conditions

A novel 3D Zn₃(L)₃(H₂L) MOF with dual hydrogen-bond donor (HBD) groups exhibited an efficient catalytic performance for the CO₂ cycloaddition with epoxides under 80 °C, 1.0 MPa and solvent-free conditions.

The Comparison between Single Atom Catalysis and Surface Organometallic Catalysis

Single atom catalysis (SAC) is a recent discipline of heterogeneous catalysis for which a single atom on a surface is able to carry out various catalytic reactions. A kind of revolution in heterogeneous catalysis by metals for which it was assumed that specific sites or defects of a nanoparticle were necessary to activate substrates in catalytic reactions. In another extreme of the spectrum, surface organometallic chemistry (SOMC), and, by extension, surface organometallic catalysis (SOMCat), have demonstrated that single atoms on a surface, but this time with specific ligands, could lead to a more predictive approach in heterogeneous catalysis. The predictive character of SOMCat was just the result of intuitive mechanisms derived from the elementary steps of molecular chemistry. This review article will compare the aspects of single atom catalysis and surface organometallic catalysis by considering several specific catalytic reactions, some of which exist for both fields, whereas others might see mutual overlap in the future. After a definition of both domains, a detailed approach of the methods, mostly modeling and spectroscopy, will be followed by a detailed analysis of catalytic reactions: hydrogenation, dehydrogenation, hydrogenolysis, oxidative dehydrogenation, alkane and cycloalkane metathesis, methane activation, metathetic oxidation, CO₂ activation to cyclic carbonates, imine metathesis, and selective catalytic reduction (SCR) reactions. A prospective resulting from present knowledge is showing the emergence of a new discipline from the overlap between the two areas.