Mechanochromism and optical remodeling of multi-network elastomers containing anthracene dimers

Mechanochemical Approaches to Fundamental Studies in Soft-Matter Physics

Stretching a segment of a polymer beyond its contour length makes its (primarily backbone) bonds more dissociatively labile, which enables polymer mechanochemistry. Integrating some backbone bonds into suitably designed molecular moieties yields mechanistically and kinetically diverse chemistry, which is becoming increasingly exploitable. Examples include, most prominently, attempts to improve mechanical properties of bulk polymers, as well as prospective applications in drug delivery and synthesis. This review aims to highlight an emerging effort to apply the concepts and experimental tools of mechanochemistry to fundamental physical questions in soft matter. A succinct summary of the state-of-the-knowledge of the field, with emphasis on foundational concepts and generalizable observations, is followed by analysis of 3 recent examples of mechanochemistry yielding molecular-level details of elastomer failure, macromolecular chain dynamics in elongational flows and kinetic allostery. We conclude with reasons to assume that the highlighted approaches are generalizable to a broader range of physical problems than considered to date.

Multiple Force-Triggered Downconverted and Upconverted Emission in Polymers Containing Diels-Alder Adducts

Fluorescent mechanophores can indicate the deformation or damage in polymers. The development of mechanophores with multi-triggered response is of great interest. Herein, Diels-Alder (DA) adducts are incorporated into linear poly(methyl acrylate) PMA-BA and network poly(hexyl methacrylate) (PHMA) as mechanophores to detect the stress caused by ultrasound, freezing, and compression. The DA mechanophores undergo retro-DA reaction to release 9-styrylanthracene chromophore upon applying force, resulting in cyan fluorescence. The dissociation ratio of the DA mechanophore after pulsed ultrasonication of PMA-BA solution for 240 minutes is estimated to be 52 % by absorption spectra and 1H NMR. Additionally, the rate constant of mechanical cleavage is calculated to be 1.2×10-4 min-1⋅kDa-1 with the decrease in molecular weight from 69 to 22 kDa measured by gel permeation chromatography. Freezing of PHMA gels as well as compression of PHMA bulk samples turn-on the DA mechanophores, revealing the microscale fracture. Photon upconversion responses toward various force stimuli are also achieved in both polymer solutions and bulk samples by doping platinum octaethylporphyrin (PtOEP) or palladium meso-tetraphenyltetrabenzoporphyrin (PdTPTBP) sensitizers with multiple excitation wavelengths.

Sacrificial Mechanical Bond is as Effective as a Sacrificial Covalent Bond in Increasing Cross-Linked Polymer Toughness

Sacrificial chemical bonds have been used effectively to increase the toughness of elastomers because such bonds dissociate at forces significantly below the fracture limit of the primary load-bearing bonds, thereby dissipating local stress. This approach owes much of its success to the ability to adjust the threshold force at which the sacrificial bonds fail at the desired rate, for example, by selecting either covalent or noncovalent sacrificial bonds. Here, we report experimental and computational evidence that a mechanical bond, responsible for the structural integrity of a rotaxane or a catenane, increases the elastomer's fracture strain, stress, and energy as much as a covalent bond of comparable mechanochemical dissociation kinetics. We synthesized and studied 6 polyacrylates cross-linked by either difluorenylsuccinonitrile (DFSN), which is an established sacrificial mechanochromic moiety; a [2]rotaxane, whose stopper allows its wheel to dethread on the same subsecond time scale as DFSN dissociates when either is under tensile force of 1.5-2 nN; a structurally homologous [2]rotaxane with a much bulkier stopper that is stable at force >5.5 nN; similarly stoppered [3]rotaxanes containing DFSN in their axles; and a control polymer with aliphatic nonsacrificial cross-links. Our data suggest that mechanochemical dethreading of a rotaxane without failure of any covalent bonds may be an important, hitherto unrecognized, contributor to the toughness of some rotaxane-cross-linked polymers and that sacrificial mechanical bonds provide a mechanism to control material fracture behavior independently of the mechanochemical response of the covalent networks, due to their distinct relationships between structure and mechanochemical reactivity.

Coumarin Dimer Is an Effective Photomechanochemical AND Gate for Small-Molecule Release

Stimulus-responsive gating of chemical reactions is of considerable practical and conceptual interest. For example, photocleavable protective groups and gating mechanophores allow the kinetics of purely thermally activated reactions to be controlled optically or by mechanical load by inducing the release of small-molecule reactants. Such release only in response to a sequential application of both stimuli (photomechanochemical gating) has not been demonstrated despite its unique expected benefits. Here, we describe computational and experimental evidence that coumarin dimers are highly promising moieties for realizing photomechanochemical control of small-molecule release. Such dimers are transparent and photochemically inert at wavelengths >300 nm but can be made to dissociate rapidly under tensile force. The resulting coumarins are mechanochemically and thermally stable, but rapidly release their payload upon irradiation. Our DFT calculations reveal that both strain-free and mechanochemical kinetics of dimer dissociation are highly tunable over an unusually broad range of rates by simple substitution. In head-to-head dimers, the phenyl groups act as molecular levers to allow systematic and predictable variation in the force sensitivity of the dissociation barriers by choice of the pulling axis. As a proof-of-concept, we synthesized and characterized the reactivity of one such dimer for photomechanochemically controlled release of aniline and its application for controlling bulk gelation.

Covalent Mechanochemistry and Contemporary Polymer Network Chemistry: A Marriage in the Making

Over the past 20 years, the field of polymer mechanochemistry has amassed a toolbox of mechanophores that translate mechanical energy into a variety of functional responses ranging from color change to small-molecule release. These productive chemical changes typically occur at the length scale of a few covalent bonds (Å) but require large energy inputs and strains on the micro-to-macro scale in order to achieve even low levels of mechanophore activation. The minimal activation hinders the translation of the available chemical responses into materials and device applications. The mechanophore activation challenge inspires core questions at yet another length scale of chemical control, namely: What are the molecular-scale features of a polymeric material that determine the extent of mechanophore activation? Further, how do we marry advances in the chemistry of polymer networks with the chemistry of mechanophores to create stress-responsive materials that are well suited for an intended application? In this Perspective, we speculate as to the potential match between covalent polymer mechanochemistry and recent advances in polymer network chemistry, specifically, topologically controlled networks and the hierarchical material responses enabled by multi-network architectures and mechanically interlocked polymers. Both fundamental and applied opportunities unique to the union of these two fields are discussed.

Dynamic Timing Control of Molecular Photoluminescent Systems

Dynamic control of molecular photoluminescence offers chemical solutions to designing functional emissive materials. Although stimuli-switchable molecular luminescent systems are well established, how to encode these dynamic emissive systems with a "timing" feature, that is, time-dependent luminescent properties, remains challenging. This Concept aims to summarize the design principles of dynamic timing molecular photoluminescent systems by discussing the state-of-the-art of this topic and the shaping of fabrication strategies at both the molecular and supramolecular levels. An outlook and perspectives are given to outline the future opportunities and challenges in the rational design and potential applications of these smart emissive systems.

The Mechanochemical Synthesis and Activation of Carbon-Rich π-Conjugated Materials

Mechanochemistry uses mechanical force to break, form, and manipulate chemical bonds to achieve functional transformations and syntheses. Over the last years, many innovative applications of mechanochemistry have been developed. Specifically for the synthesis and activation of carbon-rich π-conjugated materials, mechanochemistry offers reaction pathways that either are inaccessible with other stimuli, such as light and heat, or improve reaction yields, energy consumption, and substrate scope. Therefore, this review summarizes the recent advances in this research field combining the viewpoints of polymer and trituration mechanochemistry. The highlighted mechanochemical transformations include π-conjugated materials as optical force probes, the force-induced release of small dye molecules, and the mechanochemical synthesis of polyacetylene, carbon allotropes, and other π-conjugated materials.

Force-reversible chemical reaction at ambient temperature for designing toughened dynamic covalent polymer networks

Force-reversible C-N bonds, resulting from the click chemistry reaction between triazolinedione (TAD) and indole derivatives, offer exciting opportunities for molecular-level engineering to design materials that respond to mechanical loads. Here, we displayed that TAD-indole adducts, acting as crosslink points in dry-state covalently crosslinked polymers, enable materials to display reversible stress-responsiveness in real time already at ambient temperature. Whereas the exergonic TAD-indole reaction results in the formation of bench-stable adducts, they were shown to dissociate at ambient temperature when embedded in a polymer network and subjected to a stretching force to recover the original products. Moreover, the nascent TAD moiety can spontaneously and immediately be recombined after dissociation with an indole reaction partners at ambient temperature, thus allowing for the adjustment of the polymer segment conformation and the maintenance of the network integrity by force-reversible behaviors. Overall, our strategy represents a general method to create toughened covalently crosslinked polymer materials with simultaneous enhancement of mechanical strength and ductility, which is quite challenging to achieve by conventional chemical methods.

Weak force-activated covalent bonds as crosslink points can increase mechanical strength and ductility in polymers but the bonds, once broken, cannot be reformed in real time under ambient conditions leading to irreversible damage. Here, the authors demonstrate that triazolinedione (TAD)-indole adducts acting as crosslink points enable materials to display already at ambient temperature reversible stress-responsiveness in real time.

The molecular mechanism of constructive remodeling of a mechanically-loaded polymer

Large or repeated mechanical loads usually degrade polymers by accelerating fragmentation of their backbones but rarely, they can cause new backbone bonds to form. When these new bonds form faster than the original bonds break, mechanical degradation may be arrested or reversed in real time. Exploiting such constructive remodeling has proven challenging because we lack an understanding of the competition between bond-forming and bond-breaking reactions in mechanically-stressed polymers. Here we report the molecular mechanism and analysis of constructive remodeling driven by the macroradical products of mechanochemical fragmentation of a hydrocarbon backbone. By studying the changing compositions of a random copolymer of styrene and butadiene sheared at 10 °C in the presence of different additives we developed an approach to characterizing this growth/fracture competition, which is generalizable to other underlying chemistries. Our results demonstrate that constructive remodeling is achievable under practically relevant conditions, requires neither complex chemistries, elaborate macromolecular architectures or free monomers, and is amenable to detailed mechanistic interrogation and simulation. These findings constitute a quantitative framework for systematic studies of polymers capable of autonomously counteracting mechanical degradation at the molecular level.

Mechanochromic elastomers with different thermo- and mechano-responsive radical-type mechanophores

To design tough soft materials, the introduction of sacrificial bonds into their skeleton is a useful method. The introduction of radical-type mechanophores (RMs), which generate coloured radicals in response to mechanical stimuli, as sacrificial bonds into the cross-linking points of elastomers is expected to be a powerful tool to elucidate the fracture mechanisms as well as the toughening of materials, given that the radicals generated from the RMs are coloured and can be quantitatively evaluated using electron paramagnetic resonance (EPR) measurements. In this study, to investigate the effect of the dynamic nature, i.e., the reactivity, of RMs introduced at the cross-linking points of polymer networks on their macroscopic mechanical properties, polymer networks cross-linked by two different RMs, a symmetric radical-type mechanophore (DFSN) and a non-symmetric radical-type mechanophore (CF/ABF), were synthesized and characterized. Compared to the polymer network cross-linked by DFSN, the network with CF/ABF exhibited higher thermal and mechanical responses, in other words much more sensitive to heat and mechanical force, resulting in better stress relaxation and energy-dissipation properties. These results demonstrate that the reactivity of the radical mechanophore at the cross-linking point is an important factor for designing polymer networks.

Polymer mechanochemistry for the release of small cargoes

The field of force-induced release of small cargoes within polymeric materials has experienced rapid growth over the past decade, not only including achieving diversified functional materials that report force, trigger degradation, activate drugs and release catalysts, but also involving investigations on the interesting force-coupled reactivity of mechanophores, such as ferrocenes. In this highlight article, we review the recent progress on polymer mechanochemistry that releases small cargoes, including small molecules and metal ions. Since mechanophores play a key role in force-responsive materials, we introduce the progress by discussing different types of mechanophores and their mechanochemical reactions for the release of acids, gases, fluorophores, drugs, iron ions, and so on. At the end, we provide our perspectives on the remaining challenges and future targets in this growing field.

Mechanochromophore-linked Polymeric Materials with Visible Color Changes

Mechanical force as a type of stimuli for smart materials has obtained much attention in the past decade. Color-changing materials in response to mechanical stimuli have shown great potential in the applications such as sensors and displays. Mechanochromophore-linked polymeric materials, which are a growing sub-class of these materials, are discussed in detail in this review. Two main types of mechanochromophores which exhibit visible color change, summarized herein, involve either isomerization or radical generation mechanisms. This review focuses on their synthesis and incorporation into polymer matrices, the type of mechanical force used, factors affecting the mechanochromic properties, and their applications. This article is protected by copyright. All rights reserved.

Fluorescent Ionic Probe for Determination of Mechanical Properties of Healed Poly(ethylene-co-methacrylic acid) Ionomer Films

In recent years, advanced materials with properties resembling biological systems, particularly artificial muscles, have received intense scrutiny. This is because the interesting conformational shape characteristics of such materials have benefited a variety of technologies, including textiles, 3D printing, and medical devices. Although a multitude of shape memory properties have been studied and developed in recent years, self-healing of these polymers after puncture or rupture has also become a major area of study. Most techniques for detection of such processes are mechanically based and require considerable hands-on monitoring. Thus, a rapid visual detection method for self-healing is highly desirable. Herein, we describe fluorescence studies for rapid detection of self-healing properties of a partially neutralized sodium ionomer poly(ethylene-co-methacrylic acid) (PEMA). In this study, two different fluorophores, parent non-ionic 4,6-dipyrenylpyrimidine and ionic 4,6-dipyrenylpyrimidinium iodide fluorophores, were evaluated as possible sensors of self-healing. Incorporation of these probes via solution blending and compatibility into a PEMA of these fluorophores were evaluated. Thermal characterizations using differential scanning calorimetry were also performed to elucidate physical characteristics of healed sites. Ratiometric fluorescence emission variations were explored within puncture-healed ionomer films and related to Young's modulus properties with good linearity, indicating potential utility of this approach for monitoring elastic modulus properties after healing has occurred. Further statistical analyses of mechanical processes using quadratic discriminant analysis resulted in development of several highly accurate predictive models for determining time since damage healing.

Mechanochemiluminescent hydrogels for real-time visualization of chemical bond scission

Quantitative and real-time characterization of mechanically induced bond scission events taken place in polymeric hydrogels is essential to uncover their fracture mechanics. Herein, a class of mechanochemiluminescent swelling hydrogels have been synthesized through a facile micellar copolymerization method using chemiluminescent bis(adamantyl)-1,2-dioxetane (Ad) as a crosslinker. This design and synthetic strategy ensure intense mechanochemiluminescence from Ad located in a hydrophobic network inside micelles. Moreover, the mechanochemiluminescent colors can be tailored from blue to red by mixing variant acceptors. Taking advantages of the transient nature of dioxetane chemiluminescence, the damage distribution and crack evolution of the hydrogels can be visualized and analyzed with high spatial and temporal resolution. The results demonstrate the strengths of the Ad mechanophore and micellar copolymerization method in the study of damage evolution and fracture mechanism of swelling hydrogels.

Bionic Polyurethane with a Reversible Core-Sheath for Real-Time On-Demand Performance Adjustment and Fluorescence Self-Reflection

Smart materials that can respond to external stimuli have attracted considerable scientific interest and achieved fruitful results with the advancement of research. However, materials with adjustable performance and which could be intervened on-demand through stimulation are still rarely mentioned. Furthermore, most of these materials published so far usually require high temperature or the assistance of catalysts to change the structure and adjust their performance, and the process is always irreversible. Herein, we proposed an anthracene-functionalized novel polyurethane with adjustable performance and fluorescence self-reflection inspired by shellfish. Anthracene was used as a dynamic group to make the polymer chain structure topologically isomerize after UV exposure, finally constructing a reversible core-sheath in a homogeneous polymer. Moreover, this process is catalyst-free and has strong spatiotemporal controllability. The appearance of the reversible core-sheath structure could achieve the performance adjustment of materials, and the strength can be increased easily in real time and on-demand by UV light exposure. Through selective irradiation, spatial control stiffening of this material can also be realized. In addition, the performance can also be self-reflected through the fluorescence to realize the performance that is visualizable. This work dramatically simplifies the requirements and conditions for material performance adjustment while expanding the versatility and applications in intelligent materials such as artificial muscles, variably flexible electronic devices, heterogeneous materials, 4D printing, and what may be discovered in the future.

Force-modulated reductive elimination from platinum(ii) diaryl complexes

Coupled mechanical forces are known to drive a range of covalent chemical reactions, but the effect of mechanical force applied to a spectator ligand on transition metal reactivity is relatively unexplored. Here we quantify the rate of C(sp2)-C(sp2) reductive elimination from platinum(ii) diaryl complexes containing macrocyclic bis(phosphine) ligands as a function of mechanical force applied to these ligands. DFT computations reveal complex dependence of mechanochemical kinetics on the structure of the force-transducing ligand. We validated experimentally the computational finding for the most sensitive of the ligand designs, based on MeOBiphep, by coupling it to a macrocyclic force probe ligand. Consistent with the computations, compressive forces decreased the rate of reductive elimination whereas extension forces increased the rate relative to the strain-free MeOBiphep complex with a 3.4-fold change in rate over a ∼290 pN range of restoring forces. The calculated natural bite angle of the free macrocyclic ligand changes with force, but 31P NMR analysis and calculations strongly suggest no significant force-induced perturbation of ground state geometry within the first coordination sphere of the (P-P)PtAr2 complexes. Rather, the force/rate behavior observed across this range of forces is attributed to the coupling of force to the elongation of the O⋯O distance in the transition state for reductive elimination. The results suggest opportunities to experimentally map geometry changes associated with reactions in transition metal complexes and potential strategies for force-modulated catalysis.

Tough Bioinspired Composites That Self-Report Damage

The increasing use of lightweight composite materials in structural applications requires the development of new damage monitoring technologies to ensure their safe use and prevent accidents. Although several molecular strategies have been proposed to report damage in polymers through mechanochromic responses, these approaches have not yet been translated into lightweight bioinspired composites for load-bearing applications. Here, we report on the development of bioinspired laminates of alternating polymer and nacre-like layers that combine optical translucency, high fracture toughness, and damage-reporting capabilities. The composites signal damage via a fluorescence color change that arises from the force activation of mechanophore molecules embedded in the material's polymer phase. A quantitative correlation between the applied strain and the fluorescence intensity was successfully established. We demonstrate that optical imaging of mechanically loaded composites allows for the localized detection of damage prior to fracture. This fluorescence-based self-reporting mechanism offers a promising approach for the early detection of damage in lightweight structural composites and can serve as a useful tool for the analysis of fracture processes in bulk transparent materials.

One-Component DNA Mechanoprobes for Facile Mechanosensing in Photopolymerized Hydrogels and Elastomers

DNA mechanosensors offer unique properties for mechano-adaptive and self-reporting materials, such as programmable bond strength and geometrical strain response, tunable fluorescent strain sensing, interfacing to biological systems, and the ability to store mechanical information. However, the facile incorporation of advanced DNA motifs into polymer networks and achieving robustness in application settings remain difficult. Herein, we introduce one-component DNA mechanoprobes that can be easily polymerized into polymer hydrogels and even elastomers to allow strain-induced fluorescence sensing. The all-in-one mechanoprobe contains a DNA hairpin for programmable force sensing, an internal fluorophore-quencher pair as a reporter, and methacrylamide groups on both ends for rapid and facile photopolymerization into networks based on the nontoxic water-soluble monomer methoxy triethylene glycol acrylate (mTEGA). In addition to mechanosensing hydrogels, we utilize the low T_g of p(mTEGA) to develop the first bulk elastomer materials with DNA force sensors, which show high elasticity and stronger mechanofluorescence. The system makes decisive steps forward for DNA-based mechanoprobes by overcoming the classical multicomponent design of such probes, allowing photopolymerization useful for the design of complex objects or even 3D printing and demonstrating that such motifs may even be useful in dry bulk materials.

Mechanochemical Release of N-Heterocyclic Carbenes from Flex-Activated Mechanophores

We have discovered a new flex-activated mechanophore that releases an N-heterocyclic carbene (NHC) under mechanical load. The mechanophore design is based upon NHC-carbodiimide (NHC-CDI) adducts and demonstrates an important first step toward flex-activated designs capable of further downstream reactivities. Since the flex-activation is non-destructive to the main polymer chains, the material can be subjected to multiple compression cycles to achieve iterative increases in the activation percentage of mechanophores. Two different NHC structures were demonstrated, signifying the potential modularity of the mechanophore design.

Red to Near-Infrared Mechanochromism from Metal-free Polycrystals: Noncovalent Conformational Locks Facilitating Wide-Range Redshift

Piezochromic organic materials that present a large difference in fluorescence wavelength in the near-infrared region have important potential applications; however, few such metal-free luminophores have been reported. In this study, we design and prepare π-conjugated electron acceptors whose planar conformation can be locked by the noncovalent interactions. The planar fused-ring geometry can narrow the optical band gap, enhance the molecular stability and rigidity, as well as increase the radiative rate. As expected, the polymorphs Re-phase and Ni-phase emit the high-brightness fluorescence with wavelength maxima (λ_em,max ) at 615 and 727 nm, respectively. Upon full grinding, the λ_em,max of Re-phase is bathochromically shifted to 775 nm. The ground powder of Re-phase becomes metastable as a consequence of noncovalent conformational locking and that the red to near-infrared (large colour difference) mechanochromism arises from the high degree of conformational coplanarity. This strategy is both conceptually and synthetically simple and offers a promising approach to the development of organic piezochromic materials with wide-range redshift and excellent penetrability.

Heterogeneity Effects in Highly Cross-Linked Polymer Networks

Despite their level of refinement, micro-mechanical, stretch-based and invariant-based models, still fail to capture and describe all aspects of the mechanical properties of polymer networks for which they were developed. This is for an important part caused by the way the microscopic inhomogeneities are treated. The Elastic Network Model (ENM) approach of reintroducing the spatial resolution by considering the network at the level of its topological constraints, is able to predict the macroscopic properties of polymer networks up to the point of failure. We here demonstrate the ability of ENM to highlight the effects of topology and structure on the mechanical properties of polymer networks for which the heterogeneity is characterised by spatial and topological order parameters. We quantify the macro- and microscopic effects on forces and stress caused by introducing and increasing the heterogeneity of the network. We find that significant differences in the mechanical responses arise between networks with a similar topology but different spatial structure at the time of the reticulation, whereas the dispersion of the cross-link valency has a negligible impact.

The many flavours of mechanochemistry and its plausible conceptual underpinnings

Mechanochemistry describes diverse phenomena in which mechanical load affects chemical reactivity. The fuzziness of this definition means that it includes processes as seemingly disparate as motor protein function, organic synthesis in a ball mill, reactions at a propagating crack, chemical actuation, and polymer fragmentation in fast solvent flows and in mastication. In chemistry, the rate of a reaction in a flask does not depend on how fast the flask moves in space. In mechanochemistry, the rate at which a material is deformed affects which and how many bonds break. In other words, in some manifestations of mechanochemistry, macroscopic motion powers otherwise endergonic reactions. In others, spontaneous chemical reactions drive mechanical motion. Neither requires thermal or electrostatic gradients. Distinct manifestations of mechanochemistry are conventionally treated as being conceptually independent, which slows the field in its transformation from being a collection of observations to a rigorous discipline. In this Review, we highlight observations suggesting that the unifying feature of mechanochemical phenomena may be the coupling between inertial motion at the microscale to macroscale and changes in chemical bonding enabled by transient build-up and relaxation of strains, from macroscopic to molecular. This dynamic coupling across multiple length scales and timescales also greatly complicates the conceptual understanding of mechanochemistry.

Substituent effect on the thermophysical properties and thermal dissociation behaviour of 9-substituted anthracene derivatives

The chemical structure and location of substituents on anthracene derivatives influence the electron balance of the aromatic system, thus determining the wavelengths at which light is absorbed, which results in the photochemically induced dimerization or monomerization. Here, the thermal dissociation kinetics of 7 photodimers of 9-substituted anthracene derivatives are studied using a combination of spectroscopic and calorimetric techniques in the condensed state and compared to scarce literature data on thermal dissociation of other anthracene derivatives. The length and chemical structure of the substituent chains have a clear impact on the melting temperatures of the anthracene derivatives and corresponding photodimers. The crystallinity of the photodimers and monomers in turn influences the thermal dissociation kinetics. The thermal dissociation behaviour and previously published photochemistry data are related to the electronic effects of the substituents by means of the Hammett parameters. Stronger electron-withdrawing effects result in larger red shifts of the maximum wavelength λmax for the photodimerization of the anthracene derivatives. It is also shown that for the studied substitutions on the 9-position of anthracene, the higher the magnitude of the electronic effect - both electron-donating and electron-withdrawing - the faster the thermal dissociation kinetics and thus the lower the thermal stability. The strong electronic effects of the substituents on the thermal and photochemical reactivity of the anthracene derivatives and their photodimers allow tuning of the thermal or photochemical responsiveness, e.g. for polymer networks.

Single-Molecule Activation and Quantification of Mechanically Triggered Palladium-Carbene Bond Dissociation

Metal-complexed N-heterocyclic carbene (NHC) mechanophores are latent reactants and catalysts for a range of mechanically driven chemical responses, but mechanochemical scission of the metal-NHC bond has not been experimentally characterized. Here we report the single-molecule force spectroscopy of ligand dissociation from a pincer NHC-pyridine-NHC Pd(II) complex. The force-coupled rate constant for ligand dissociation reaches 50 s^-1 at forces of approximately 930 pN. Experimental and computational observations support a dissociative, rather than associative, mechanism of ligand displacement, with rate-limiting scission of the Pd-NHC bond followed by rapid dissociation of the pyridine moiety from Pd.

Empowering self-reporting polymer blends with orthogonal optical properties responsive in a broader force range

Self-reporting polymers, which can indicate damage with perceptible optical signals in a tailored force range, are useful as stress-sensitive sensors. We demonstrate a simple approach to realize this function by embedding two distinct mechanophores - rhodamine (Rh) and bis(adamantyl)-1,2-dioxetane (Ad), in polyurethane/polylactic acid blends. The deformed blends generate red coloration and red chemiluminescence. Such a unique dual-responsive behavior was evaluated by solid-state UV-vis spectroscopy, macroscopic tensile tests with in situ RGB and light intensity analyses, which supported a stress-correlated occurrence of the ring-opening of Rh, the scission of Ad and the fluorescence resonance energy transfer process between the respective mechanochemical species. Complementarity stemming from the difference in properties and manifestations of the two mechanophores is essential. That is, the more labile Rh allows shifting the appreciable optical changes to a much lower force threshold; the transient nature and high dynamic range of mechanochemiluminescence from Ad map in real time where and when many of the covalently incorporated dioxetane bonds break; besides, the disrupted yet non-scissile structure of Rh acts as a fluorescent acceptor to effectively harvest chemiluminescence from ruptured Ad. The current strategy is thus empowering multi-functional mechano-responsive polymers with greatly improved sensitivity and resolution for multimodal stress reporting.

A Mechanochemical Reaction Cascade for Controlling Load-Strengthening of a Mechanochromic Polymer

We demonstrate an intermolecular reaction cascade to control the force which triggers crosslinking of a mechanochromic polymer of spirothiopyran (STP). Mechanochromism arises from rapid reversible force-sensitive isomerization of STP to a merocyanine, which reacts rapidly with activated C=C bonds. The concentration of such bonds, and hence the crosslinking rate, is controlled by force-dependent dissociation of a Diels-Alder adduct of anthracene and maleimide. Because the adduct requires ca. 1 nN higher force to dissociate at the same rate as that of STP isomerization, the cascade limits crosslinking to overstressed regions of the material, which are at the highest rate of material damage. Using comb polymers decreased the minimum concentration of mechanophores required to crosslinking by about 100-fold compared to previous examples of load-strengthening materials. The approach described has potential for controlling a broad range of reaction sequences triggered by mechanical load.

A Polymer with Mechanochemically Active Hidden Length

Incorporating hidden length into polymer chains can improve their mechanical properties, because release of the hidden length under mechanical loads enables localized strain relief without chain fracture. To date, the design of hidden length has focused primarily on the choice of the sacrificial bonds holding the hidden length together. Here we demonstrate the advantages of adding mechanochemical reactivity to hidden length itself, using a new mechanophore that integrates (Z)-2,3-diphenylcyclobutene-1,4-dicarboxylate, with hitherto unknown mechanochemistry, into macrocyclic cinnamate dimers. Stretching a polymer of this mechanophore more than doubles the chain contour length without fracture. DFT calculations indicate that the sequential dissociation of the dimer, followed by cyclobutene isomerization at higher forces yields a chain fracture energy 11 times that of a simple polyester of the same initial contour length and preserves high energy-dissipating capacity up to ∼3 nN. In sonicated solutions cyclobutene isomerizes to two distinct products by competing reaction paths, validating the computed mechanochemical mechanism and suggesting an experimental approach to quantifying the distribution of single-chain forces under diverse loading scenarios.

Mechanochemical Regulation of Oxidative Addition to a Palladium(0) Bisphosphine Complex

Here, we report the effect of force applied to the biaryl backbone of a bisphosphine ligand on the rate of oxidative addition of bromobenzene to a ligand-coordinated palladium center. Local compressive and tensile forces on the order of 100 pN were generated using a stiff stilbene force probe. A compressive force increases the rate of oxidative addition, whereas a tensile force decreases the rate, relative to that of the parent complex of strain-free ligand. Rates vary by a factor of ∼6 across ∼340 pN of force applied to the complexes. The crystal structures and DFT calculations support that force-induced perturbation of the geometry of the reactant is negligible. The force-rate relationship observed is mainly attributed to the coupling of force to nuclear motion comprising the reaction coordinate. These observations inform the development of catalysts whose activity can be tuned by an external force that is adjusted within a catalytic cycle.

Semi-IPNs Reinforced with Silica Janus Nanoparticles and Their Stress Sensing with Mechanoluminescent Probe

A series of nanocomposite elastomers are prepared by dispersing surface-modified silica Janus nanoparticles into semi-interpenetrating network (Semi-IPN) of polyurethane/polyethyl methacrylate. Benefiting from the hierarchically crosslinked structures that consist of physical interlocking mediated by hydrogen-bond-rich silica Janus nanoparticles and permanent crosslinking by Semi-IPN, these elastomers exhibit excellent mechanical properties. Moreover, the Janus nanosheet is found more effective in strengthening and toughening the Semi-IPN, in comparison to Janus hollow sphere. Since 1,2-dioxetane is covalently embedded in these elastomers as a mechanoluminescent stress probe, stress transfer between the polymer and Janus nanoparticles and the toughening mechanism can be illuminated, which offer exciting opportunities to study the failure process of complex polymer nanocomposites with high spatial and temporal resolution.

Regulating Heterogeneous Catalysis of Gold Nanoparticles with Polymer Mechanochemistry

Polymer mechanochemistry has emerged as a unique approach to regulate homogeneous catalysis in chemical transformations. The utilization of polymer mechanochemistry to regulate heterogeneous catalysis, however, still remains to be investigated. In this study, using polymer-grafted gold nanoparticles as the model heterogeneous catalysts, we show that polymer chains can be mechanically ruptured from the surface of gold nanoparticles, and thus, the catalytic activity of gold nanoparticles can be accelerated under sonication. The mechanical activation of polymer-grafted gold nanoparticles only occurs when the grafted polymer chains exceed a threshold molecular weight. This mechanical behavior is similar to those mechanophore-linked polymers. More importantly, further characterizations reveal that the Au-Au bonds instead of the Au-S bonds are broken at the heterointerfaces of polymer chains and gold nanoparticles. Our study unveils an unprecedented characteristic of polymer-grafted metallic nanoparticles in response to external mechanical stress.

100th Anniversary of Macromolecular Science Viewpoint: Enabling Advances in Fluorescence Microscopy Techniques

In the past few decades there has been a revolution in the field of optical microscopy with emerging capabilities such as super-resolution and single-molecule fluorescence techniques. Combined with the classical advantages of fluorescence imaging, such as chemical labeling specificity, and noninvasive sample preparation and imaging, these methods have enabled significant advances in our polymer community. This Viewpoint discusses several of these capabilities and how they can uniquely offer information where other characterization techniques are limited. Several examples are highlighted that demonstrate the ability of fluorescence microscopy to understand key questions in polymer science such as single-molecule diffusion and orientation, 3D nanostructural morphology, and interfacial and multicomponent dynamics. Finally, we briefly discuss opportunities for further advances in techniques that may allow them to make an even greater contribution in polymer science.

The endeavor of vibration-induced emission (VIE) for dynamic emissions

Organic chromophores with large Stokes shifts and dual emissions are fascinating because of their fundamental and applied interest. Vibration-induced emission (VIE) refers to a tunable multiple fluorescence exhibited by saddle-shaped N,N'-disubstituted-dihydribenzo[a,c]phenazines (DHPs), which involves photo-induced configuration vibrations from bent to planar form along the N-N axis. VIE-active molecules show intrinsic long-wavelength emissions in the unconstrained state (planar state) but bright short-wavelength emissions in the constrained state (bent state). The emission response for VIE-active luminogens is highly sensitive to steric hindrance encountered during the planarization process such that a tiny structural variation can induce an evident change in fluorescence. This can often be achieved by tuning the intensity ratio of short- and long-wavelength bands. In some special cases, the alterations in the emission wavelength of VIE fluorophores can be achieved step by step by harnessing the degree of bending angle motion in the excited state. In this perspective, we summarize the latest progress in the field of VIE research. New bent heterocyclic structures, as novel types of VIE molecules, are being developed, and the general features of the chemical structures are also being proposed. Technologically, novel emission color-tuning approaches and VIE-based probes for visualizing biological activity are presented to demonstrate how the dynamic VIE effect can be exploited for cutting-edge applications.

Thermal dissociation of anthracene photodimers in the condensed state: kinetic evaluation and complex phase behaviour

Thermally and photochemically reversible functional groups, such as photodimers of anthracene derivatives, offer interesting stimuli-responsive behaviour. To evaluate their potential for application in reversible polymer networks, accurate kinetic parameters and knowledge of their thermophysical behaviour are required. Accurate kinetic studies of the thermal dissociation of the photodimers in the condensed state, thus without the influence of solvents on their reactivity, is still lacking. A methodology was set up to accurately evaluate the chemical reaction kinetics and complex phase behaviour during the thermal dissociation of photodimers into their corresponding monomers. Temperature-controlled time-resolved FTIR spectroscopy was used to determine the reaction progress, while non-isothermal DSC measurements were used to study the thermophysical changes, resulting from the thermal dissociation reaction. The thermal dissociation behaviour in the condensed state is more challenging than in the solution state due to the crystallinity of the dimers, stabilizing the dimers and thus slowing down the initial dissociation rates. Distinctly different sets of kinetic parameters were found for the dissociation from the molten and the crystalline state. For experiments performed below the melting temperature of the photodimer, the reaction rate changes abruptly as the dimer is partly dissociated and partly dissolved into the formed monomer. This methodology provides an accurate assessment of the reaction kinetics with detailed knowledge about the complex phase behaviour of the mixture of the anthracene photodimer and monomer during thermal dissociation.

An engineer's introduction to mechanophores

Mechanophores (MPs) are a class of stimuli-responsive materials that are of increasing interest to engineers due to their potential applications as stress sensors. These mechanically responsive molecules change color or become fluorescent upon application of a mechanical stimulus as they undergo a chemical reaction when a load is applied. By incorporating MPs such as spirolactam, spiropyran, or dianthracene into a material system, the real-time stress distribution of the matrix can be directly observed through a visual response, ideal for damage and failure sensing applications. A wide array of applications that require continuous structural health monitoring could benefit from MPs including flexible electronics, protective coatings, and polymer matrix composites. However, there are significant technical challenges preventing MP implementation in industry. Effective strategies to quantitatively calibrate the photo response of the MP with applied stress magnitudes must be developed. Additionally, environmental conditions, including temperature, humidity, and ultraviolet light exposure can potentially impact the performance of MPs. By addressing these limitations, engineers can work to move MPs from the synthetic chemistry bench to the field. This review aims to highlight recent progress in MP research, discuss barriers to implementation, and provide an outlook on the future of MPs, specifically focused on polymeric material systems. Although the focus is on engineering MPs for bulk materials, a brief overview of mechanochemistry will be discussed followed by methods for activation and quantification of MP photo response (concentrating specifically on fluorescently active species). Finally, current challenges and future directions in MP research will be addressed.

Mechanical Strength Management of Polymer Composites through Tuning Transient Networks

The addition of transient networks to polymer composites marks a new direction toward the design of novel materials, with numerous biomedical and industrial applications. The network structure connected by transient cross-links (CLs) relaxes as time evolves, which results in the stretching release of polymer strands between transient CLs during strain. Using molecular dynamics simulations, we measure directly the stress-strain curves of double polymer networks (DPNs), containing both transient and permanent components, at different strain rates. Lifetime and density of transient CLs control the relaxation spectrum of transient networks and determine the mechanical properties of DPNs. A Rouse mode analysis reveals that at high strain rates the mechanical strength of DPNs is defined jointly by the cross-linking structures of permanent and transient networks. At low strain rates, the cross-linking structure of transient network relaxes, leaving the permanent component of the network as a sole contributor to the mechanical strength of DPNs. The transient network is shown to facilitate a dissipation of energy at higher strain rates and prevents a rupture of the network, while the permanent network preserves the structural integrity of the composite at low strain rates. This study provides computational and theoretical foundations for designing polymer composites with desirable mechanical strength and toughness by means of tuning transient networks.

Phase transformation induced mechanochromism in a platinum salt: a tale of two polymorphs

Red crystals of [Pt(tpy)Cl]NO₃·HNO₃ turn yellow when subjected to a mechanical stimulus. Here we report the structural details of mechanochromic system.

An optomechanical study of mechanoluminescent elastomeric polyurethanes with different hard segments

An optomechanical study of a series of mechanochemiluminescent polyurethanes with different hard segments provides a detailed picture of microphase separation dependent force transduction during their failure process.