Application and mechanism of Co3O4/Co(OH)2 heterojunctions as matrices for small molecules detection by MALDI-TOF MS

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has emerged as a superior technique for detecting small molecules, owing to the strategic utilization of inorganic nanomaterial matrices. Despite the impressive capabilities of various novel matrices, the underlying interaction mechanisms between inorganic matrices and analytes remain largely unexplored. In this study, we synthesized Co3O4 nanocubes, Co(OH)2 nanosheets, Co3O4/Co(OH)2 heterojunctions, and Co3O4+Co(OH)2 composites via a facile one-pot method. Amino acids were selected as model analytes for performance evaluation. Notably, the Co3O4/Co(OH)2 heterojunctions significantly enhanced signal intensity and lowered detection limits to the parts-per-billion (ppb) level, outperforming Co3O4 nanocubes, Co(OH)2 nanosheets, and Co3O4+Co(OH)2 composites. The detection results for environmental pollutants, especially in solutions containing real samples, highlight the outstanding performance of the heterojunction material as a matrix. Further characterization indicates that the formation of the heterojunction enhances nanoparticle dispersion and promotes the separation of photogenerated electron-hole pairs. Consequently, more photogenerated charge carriers can be transferred to the target analytes, facilitating their charging ability and ultimately enhancing signal intensity in MALDI-TOF MS. These results clearly demonstrate that the enhanced photocatalytic performance directly drives the improvement of MALDI-TOF MS performance, excluding interference from other factors. Thus, this study successfully combines photocatalytic mechanisms with MALDI-TOF MS mechanisms, providing new insights into the enhancement of MALDI-TOF MS performance. Additionally, it offers a new detection method for environmental pollutants.

Design Refinement of Catalytic System for Scale-Up Mild Nitrogen Photo-Fixation

Ammonia and nitric acid, versatile industrial feedstocks, and burgeoning clean energy vectors hold immense promise for sustainable development. However, Haber-Bosch and Ostwald processes, which generates carbon dioxide as massive by-product, contribute to greenhouse effects and pose environmental challenges. Thus, the pursuit of nitrogen fixation through carbon-neutral pathways under benign conditions is a frontier of scientific topics, with the harnessing of solar energy emerging as an enticing and viable option. This review delves into the refinement strategies for scale-up mild photocatalytic nitrogen fixation, fields ripe with potential for innovation. The narrative is centered on enhancing the intrinsic capabilities of catalysts to surmount current efficiency barriers. Key focus areas include the in-depth exploration of fundamental mechanisms underpinning photocatalytic procedures, rational element selection, and functional planning, state-of-the-art experimental protocols for understanding photo-fixation processes, valid photocatalytic activity evaluation, and the rational design of catalysts. Furthermore, the review offers a suite of forward-looking recommendations aimed at propelling the advancement of mild nitrogen photo-fixation. It scrutinizes the existing challenges and prospects within this burgeoning domain, aspiring to equip researchers with insightful perspectives that can catalyze the evolution of cutting-edge nitrogen fixation methodologies and steer the development of next-generation photocatalytic systems.

Heterogeneous Interface Engineering of 2D Black Phosphorus-Based Materials for Enhanced Photocatalytic Performance

Photocatalysis has garnered significant attention as a sustainable approach for energy conversion and environmental management. 2D black phosphorus (BP) has emerged as a highly promising semiconductor photocatalyst owing to its distinctive properties. However, inherent issues such as rapid recombination of photogenerated electrons and holes severely impede the photocatalytic efficacy of single BP. The construction/stacking mode of BP with other nanomaterials decreases the recombination rate of carriers and extend its functionalities. Herein, from the perspective of atomic interface and electronic interface, the enhancement mechanism of photocatalytic performance by heterogeneous interface engineering is discussed. Based on the intrinsic properties of BP and corresponding photocatalytic principles, the effects of diverse interface characteristics (point, linear, and planar interface) and charge transfer mechanisms (type I, type II, Z-scheme, and S-scheme heterojunctions) on photocatalysis are summarized systematically. The modulation of heterogeneous interfaces and rational regulation of charge transfer mechanisms can enhance charge migration between interfaces and even maximize redox capability. Furthermore, research progress of heterogeneous interface engineering based on BP is summarized and their prospects are looked ahead. It is anticipated that a novel concept would be presented for constructing superior BP-based photocatalysts and designing other 2D photocatalytic materials.

A review of electrospun metal oxide semiconductor-based photocatalysts

In recent years, photocatalytic materials with a nanofiber-like morphology have garnered a surge of academic attention due to their distinctive properties, including an expansive specific surface area, a considerable high aspect ratio, a pronounced resistance to agglomeration, superior electron survivability, and robust surface activity. Consequently, the synthesis of photocatalytic nanofiber materials through various methodologies has drawn considerable attention. The electrospinning technique has been established as a prevalent method for fabricating nanofiber-structured materials, owing to its advantageous properties, including the ability for mass production and the assurance of high continuity. This review focuses on metal oxide semiconductor-based materials, which are crucial components of photocatalysts. We summarize several recent studies that explore morphology modulation, surface modification, element doping, and composite construction using uniaxial and coaxial electrospinning techniques. Finally, we present potential approaches for constructing high-activity photocatalytic systems through electrospinning technique.

Synchronous photocatalytic benzimidazole formation and olefin reduction by magnetic separable visible-light-driven Pd-g-C3N4-Vanillin@γ-Fe2O3-TiO2 Nanocomposite

A visible light-responsive magnetically separable photocatalyst Pd-g-C3N4-Vanillin@γ-Fe2O3-TiO2 is fabricated using vanillin as a natural junction under ultrasonic agitation. Structural, morphological, optical, thermal, and magnetic assessments of the as-prepared catalyst are carried out. The photocatalyst successfully drives the simultaneous benzimidazole formation, and olefin hydrogenation with high atom economy under blue LED light and mild conditions. The photocatalytic activity of Pd-g-C3N4-Vanillin@γ-Fe2O3-TiO2 is significantly affected by the γ-Fe2O3:TiO2 weight ratio. PL spectra revealed the effective separation of carriers in the fabricated catalyst promoting its photocatalytic activity. The action spectra using the apparent quantum efficiency (AQE) exhibited the maximum AQEs at 520 and 750 nm in which the highest performance for styrene hydrogenation is observed. The title magnetically separable heterogeneous photocatalyst provides high yields of products under perfectly safe visible light, produces low/zero waste, and avoids using an external high-pressure hydrogen gas source, harmful solvents, undesirable additives, and reducing agents rendering green conditions for chemical reactions.

Harnessing coal and coal waste for environmental conservation: A review of photocatalytic materials

Fossil fuels, especially coal, have played a pivotal role in driving technological and economic advancements over the past century, though accompanied by numerous environmental challenges. Rapid progress in green and sustainable energy sources, including tidal, wind, and solar energy, coupled with growing environmental concerns, the conventional coal industry is experiencing a sustained decline in both size and financial viability. This situation necessitates the urgent adoption of advanced approaches to coal utilization. Beyond serving as an energy source, coal and its by-products, known as coal waste, can serve as valuable resources for the development of advanced materials, including photocatalysts. The advancement of photocatalytic materials derived from coal and coal waste can capitalize on these natural carbon and mineral sources, providing a viable solution to numerous environmental challenges. Currently, research in this domain remains in its early stages, with existing studies primarily focusing on specific types of photocatalysts or particular aspects of the fabrication process. Therefore, available coal-based and coal waste-based photocatalytic materials were systematically examined and categorized into six types according to their composition and dimensional/structural characteristics. Each type of photocatalytic material was introduced, along with common fabrication and characterization technologies. Representative works were discussed in detail to highlight the unique features of different types of coal-based and coal waste-based photocatalytic materials. Furthermore, the promising applications of these materials in environmental protection and pollution treatment were summarized, while also addressing the challenges and prospects in this research field. This review comprehensively overviews the fundamental knowledge and recent advancements in photocatalytic materials derived from coal and coal waste, with the goal of catalyzing the development of next generation photocatalysts and contributing to the transformation of the conventional coal industry.

Materials Advances in Photocatalytic Solar Hydrogen Production: Integrating Systems and Economics for a Sustainable Future

Photocatalytic solar hydrogen generation, encompassing both overall water splitting and organic reforming, presents a promising avenue for green hydrogen production. This technology holds the potential for reduced capital costs in comparison to competing methods like photovoltaic-electrocatalysis and photoelectrocatalysis, owing to its simplicity and fewer auxiliary components. However, the current solar-to-hydrogen efficiency of photocatalytic solar hydrogen production has predominantly remained low at ≈1-2% or lower, mainly due to curtailed access to the entire solar spectrum, thus impeding practical application of photocatalytic solar hydrogen production. This review offers an integrated, multidisciplinary perspective on photocatalytic solar hydrogen production. Specifically, the review presents the existing approaches in photocatalyst and system designs aimed at significantly boosting the solar-to-hydrogen efficiency, while also considering factors of cost and scalability of each approach. In-depth discussions extending beyond the efficacy of material and system design strategies are particularly vital to identify potential hurdles in translating photocatalysis research to large-scale applications. Ultimately, this review aims to provide understanding and perspective of feasible pathways for commercializing photocatalytic solar hydrogen production technology, considering both engineering and economic standpoints.

Electrodeposition of Au Nanowires via Amine Ligand-Induced Active Surface Growth

Amine ligands have been widely applied as morphology-directing reagents in nanostructure synthesis. In this work, we explored the application of the amine ligands in the active surface growth mechanism in place of the strong thiolated ligands. Despite being weaker compared to the thiols, amine ligands such as aniline were also shown to be capable of facilitating the template-less electrodeposition of Au nanowires (NWs) on the substrate via the active surface growth mechanism. Given the close binding difference between the amine-grafted substrate and the ligands, substrate functionalization becomes critically important for effective construction of the active surface and the growth of the nanowires. Additionally, the growth with the amine ligands took place at more positive reduction potentials and is less prone to splitting and bundle formation. A systematic generality study revealed that besides the aromatic amines, long-chain aliphatic amines were also capable of facilitating nanowire growth. Given the weak binding affinity of the amine ligands, the Au NWs are readily accessible for further processing to generate sophisticated one-dimensional structures. As a demonstration, tandem electrodeposition was performed to directly obtain coaxial core-shell Au@Pt NWs with adjustable length, diameter, and shell thickness.

FeSe2 and Its Composites for Pollutants Removal: Synthesis, Mechanisms, and Application Potential

In recent years, the research of FeSe2 and its composites in environmental remediation has been gradually carried out. And the FeSe2 materials show great catalytic performance in photocatalysis, electrocatalysis, and Fenton-like reactions for pollutants removal. Therefore, the studies and applications of FeSe2 materials are reviewed in this work, including the common synthesis methods, the role of Fe and Se species as well as the catalyst structure, and the potential for practical environmental applications. Hereinto, it is worth noting in particular that the lower-valent Se (Se2-), unsaturated Se (Se-), and Se vacancies (VSe) can play different roles in promoting pollutants removal. In addition, the FeSe2 material also demonstrates high stability, reusability, and adaptability over a wider pH range as well as universality to different pollutants. In view of the overall great properties and performance of FeSe2 materials compared with other typical Fe-based materials, it deserves and needs further research. And finally, this paper presents some challenges and perspectives in future development, looking forward to providing helpful guidance for the subsequent research of FeSe2 and its composites for environmental application.

Enhanced photocatalytic performance of SnS2 under visible light irradiation: strategies and future perspectives

Tin(II) sulfide (SnS2) has emerged as a promising candidate for visible light photocatalytic materials. As a member of the transition metal dichalcogenides (TMDs) family, SnS2 features a band gap of approximately 2.20 eV and a layered structure, rendering it suitable for visible light activation with a high specific surface area. However, the application of SnS2 as a visible light photocatalyst still requires improvement, particularly in addressing the high recombination of electrons and holes, as well as the poor selectivity inherent in its perfect crystal structure. Therefore, ongoing research focuses on strategies to enhance the photocatalytic performance of SnS2. In this comprehensive review, we analyze recent advances and promising strategies for improving the photocatalytic performance of SnS2. Various successful approaches have been reported, including controlling the reactive facets of SnS2, inducing defects in the crystal structure, manipulating morphologies, depositing noble metals, and forming heterostructures. We provide a detailed understanding of these phenomena and the preparation techniques involved, as well as future considerations for exploring new science in SnS2 photocatalysis and optimizing performance.

Recent advances in designing and developing efficient sillenite-based materials for photocatalytic applications

Sillenite materials have been the subject of intense investigation for recent years due to their unique characteristics. They possess a distinct structure with space group I23, allowing them to exhibit distinctive features, such as an electronic structure ideal for certain applications such as photocatalysis. The present research delves into the structure, synthesis, and properties of sillenites, highlighting their suitability for photocatalysis. It explores also advanced engineering strategies for designing sillenite-based photocatalysts, including heterojunction formation, morphology modification, doping, and hybrid processes. Each strategy offers advantages and limitations that are critically discussed. The review then lists and discusses the photocatalytic performance of various sillenite-based systems recently developed for common applications, such as removing hazardous organic and inorganic contaminants, and even infrequent applications, such as microbial inactivation, H2 generation, CO2 reduction and N2 fixation. Finally, valuable insights and suggestions are put forward for future research directions in the field of sillenite-based photocatalysis. This comprehensive overview would provide a valuable resource for the development of efficient photocatalytic systems to address environmental and energy challenges.

Activating two-dimensional semiconductors for photocatalysis: a cross-dimensional strategy

The emerging two-dimensional (2D) semiconductors substantially extend materials bases for versatile applications such as semiconductor photocatalysis demanding semiconductive matrices and large surface areas. The dimensionality, while endowing 2D semiconductors the unique properties to host photocatalytic functionality of pollutant removal and hydrogen evolution, hurdles the activation paths to form heterogenous photocatalysts where the photochemical processes are normally superior over these on the mono-compositional counterparts. In this perspective, we present a cross-dimensional strategy to employ thenD (n= 0-2) clusters or nanomaterials as activation partners to boost the photocatalytic activities of the 2D semiconductors. The formation principles of heterogenous photocatalysts are illustrated specifically for the 2D matrices, followed by selection criteria of them among the vast 2D database. The computer investigations are illustrated in the density functional theory route and machine learning benefitted from the vast samples in the 2D library. Synthetic realizations and characterizations of the 2D heterogenous systems are introduced with an emphasis on chemical methods and advanced techniques to understand materials and mechanistic studies. The perspective outlooks cross-dimensional activation strategies of the 2D materials for other applications such as CO2removal, and materials matrices in other dimensions which may inspire incoming research within these fields.

Modification engineering of TiO2-based nanoheterojunction photocatalysts

Titanium dioxide (TiO2)-based photocatalysts have gained increasing attention for their versatile applications in organic degradation, hydrogen production, air purification, and CO2 reduction. Various TiO2-based heterojunction structures, including type I, type II, Schottky junction, Z-scheme, and S-scheme, have been extensively studied. The current research frontier is centered on the engineering modifications of TiO2-based nanoheterojunction photocatalysts, such as defect engineering, morphological engineering, crystal phase/facet engineering, and multijunction engineering. These modifications enhance carrier transport, separation, and light absorption, thereby improving the photocatalytic performance. Remarkably, this aspect has been less addressed in existing reviews. This review aims to fill this gap by focusing on the engineering modifications of TiO2-based nanoheterojunction photocatalysts. We delve into specific topics like oxygen vacancies, n-p homojunctions, and double defects. The review also systematically discusses the applications of multidimensional heterojunctions and examines carrier transport pathways in heterophase/facet junctions and their interactions with heterojunctions. A comprehensive summary of multijunction systems, including multi-Schottky junctions, semiconductor-based heterojunction-attached Schottky junctions, and multisemiconductor-based heterojunctions, is presented. Lastly, we outline future perspectives in this promising research field. This paper will assist researchers in constructing more efficient TiO2-based nanoheterojunction photocatalysts.

Phosphate ester functionalized fluorene-benzothiadiazole alternating copolymer/hydroxylated g-C3N4 heterojunctions for efficient hydrogen evolution under visible-light irradiation

It is highly desirable to explore functionalized polymer semiconductor/g-C3N4 heterojunction photocatalysts with the tight interfacial connection for promoting the photogenerated electron-hole pair separation, improving the hydrophilicity, extending the visible light response and achieving the efficient visible light-driven H2 evolution. Herein, we synthesized novel poly[9,9-bis(3-ethyl phosphate propyl)fluorene-alt-benzothiadiazole] (PPFBT) with a phosphate ester on every repeating unit by the Suzuki polymerization and then fabricated PPFBT/hydroxylated g-C3N4 (PPFBT/CN-OH) heterojunctions via a surface hydroxyl-induced assembly process. The ratio-optimized 5PPFBT/CN-OH shows the hydrogen evolution activity of 2662.4 μmol·g-1·h-1, an 11.1-time enhancement compared to CN-OH. The improved photocatalytic activity is mainly attributed to the enhanced electron-hole pair separation due to the tight interfacial connection by hydrogen bond (P=O…H-O) and N…S interactions between PPFBT and CN-OH. It is verified that abundant phosphate ester groups of PPFBT improve the hydrophilicity and form coordination bonds with platinum (P=O:Pt) as a cocatalyst to facilitate water splitting for H2 evolution. It is also confirmed that the enhanced electron-hole pair separation is mainly dependent on the excited high-energy level electron transfer from CN-OH to PPFBT. This work provides a rational molecular design strategy for constructing efficient functionalized polymer semiconductor/g-C3N4 heterojunctions for sunlight-driven H2 evolution.

Electrospinning Photocatalysis Meet In Situ Irradiated XPS: Recent Mechanisms Advances and Challenges

Producing solar fuels over photocatalysts under light irradiation is a considerable way to alleviate energy crises and environmental pollution. To develop the yields of solar fuels, photocatalysts with broad light absorption, fast charge carrier migration, and abundant reaction sites need to be designed. Electrospun 1D nanofibers with large specific areas and high porosity have been widely used in the efficient production of solar fuels. Nevertheless, it is challenging to do in-depth mechanism research on electrospun nanofiber-based photocatalysts since there are multiple charge transfer routes and various reaction sites in these systems. Here, the basic principles of electrospinning and photocatalysis are systemically discussed. Then, the different roles of electrospun nanofibers played in recent research to boost photocatalytic efficiency are highlighted. It is noteworthy that the working principles and main advantages of in situ irradiated photoelectron spectroscopy (ISI-XPS), a new technique to investigate migration routes of charge carriers and identify active sites in electrospun nanofibers based photocatalysts, are summarized for the first time. At last, a brief summary on the future orientation of photocatalysts based on electrospun nanofibers as well as the perspectives on the development of the ISI-XPS technique are also provided.

Interfacial construction of SnS2/Zn0.2Cd0.8S nanopolyhedron heterojunctions for enhanced photocatalytic hydrogen evolution

ZnCdS, a metal chalcogenide solid solution, has attracted significant attention. However, two primary challenges hinder its widespread application in photocatalytic hydrogen evolution: the rapid recombination rate of photogenerated carriers and susceptibility to photo-oxidation in the aqueous environments. In this article, a facile hydrothermal route was employed for the first time to uniformly assemble SnS2 nanoparticles onto the surface of Zn0.2Cd0.8S (ZCS) nanopolyhedra. The intimate contact of two materials resulted in the formation of heterojunctions. By adjusting the content of SnS2, the hydrogen evolution reaction (HER) performance was optimized to reach up to 12170 μmol/gh, which is 1.9 times of the pristine ZCS. Notably, the photocatalyst demonstrated remarkable stability with an apparent quantum yield (AQY) of 15.5% at 420 nm. The enhanced photocatalytic performance can be attributed to the following factors: (i) The heterojunction composite, with larger surface area and more micropores, provides additional active sites and exhibits high photocatalytic activity; (ii) The internal electric field accelerates the separation of photogenerated carriers and reduces the recombination rate of electron-hole pairs; (iii) The photogenerated holes can be quickly transferred to the valence band of SnS2 and react with triethanolamine, thereby significantly reducing the photo-oxidation of ZCS. This work not only proposed a feasible route to improve the photocatalytic activity of ZCS, but also provided insights into the role of heterojunctions and the reaction mechanism.

Synthesis and investigation on synergetic effect of activated carbon loaded silver nanoparticles with enhanced photocatalytic and antibacterial activities

In this study, we synthesized silver nanoparticle-loaded cashew nut shell activated carbon (Ag/CNSAC). The synthesized samples were characterized by XRD, XPS, SEM with EDS, FT-IR, and BET analysis. The XRD, XPS, and EDS data provided convincing proof that Ag loaded on CNSAC is formed. The energy dispersive spectrum analysis and X-ray diffraction pattern both supported the face-centered cubic and amorphous structures of Ag/CNSAC. The SEM micrographs showed the inner surface development of Ag NPs and many tiny pores in CNSAC. The photodegradation of methylene blue (MB) dye by the Ag/CNSAC photocatalyst was investigated. This effective degradation of MB dye by Ag/CNSAC is attributed to the cooperative action of Ag as a photocatalyst and CNSAC as a catalytic support and adsorbent. In tests with gram-positive and negative bacteria including Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), the as-synthesized Ag/CNSAC showed outstanding antibacterial efficiency. Additionally, this study demonstrates a workable procedure for creating an affordable and efficient Ag/CNSAC for the photocatalytic eradication of organic contaminants.

High-performance ZnIn2S4/Ni(dmgH)2 for photocatalytic hydrogen evolution: Ion exchange construction, photocorrosion mitigation, and efficiency enhancement by photochromic effect

In this work, a novel photocatalyst of ZnIn₂S₄/Ni(dmgH)₂ was designed by a simple chemical precipitation method and used to enhance hydrogen evolution under visible light irradiation. Along with vigorous discharges of hydrogen bubbles, an optimal rate of 36.3 mmol/g/h was reached under UV-Vis light for hydrogen evolution, nearly 4.9 times of the one from pure ZnIn₂S₄. The heterojunction exhibits steady hydrogen evolution capability and owns a high apparent quantum efficiency (AQE) of 20.45% under the monochromatic light at 420 nm. By coupling ZnIn₂S₄ with Ni(dmgH)₂, an extraordinary photochromic phenomenon was detected and attributed to the active Ni-S component in situ formed between the nickel and sulfur composites under light irradiation. The emerging sulfide benefits light absorption of the system and separation of photogenerated electron and hole pairs. Besides providing a promising photocatalyst for visible light hydrogen production, the present work is hoped to inspire new trends of catalytic medium designs and investigations.

Development of ZnO/SnO2/rGO hybrid nanocomposites for effective photocatalytic degradation of toxic dye pollutants from aquatic ecosystems

The impact of ZnO/SnO₂/reduced graphene oxide nanocomposites (ZnO/SnO₂/rGO NCs) for improved photocatalytic degradation of organic dye pollution is examined in this study. The developed ternary nanocomposites had a variety of characteristics that were detected, such as crystallinity, recombination of photogenerated charge carriers, energy gap, and surface morphologies. When rGO was added to the mixture, the optical band gap energy of ZnO/SnO₂ was lowered, which improved the photocatalytic activity. Additionally, in comparison to ZnO, ZnO/rGO, SnO₂/rGO samples, the ZnO/SnO₂/rGO nanocomposites demonstrated exceptional photocatalytic effectiveness for the destruction of orange II (99.8%) and reactive red 120 dye (97.02%), respectively after 120 min exposure to sunlight. The high electron transport properties of the rGO layers, which make it feasible to efficiently separate electron-hole pairs, are attributed to the enhanced photocatalytic activity of the ZnO/SnO₂/rGO nanocomposites. According to the results, synthesized ZnO/SnO₂/rGO nanocomposites are a cost-efficient option for removing dye pollutants from an aqueous ecosystem. Studies show that ZnO/SnO₂/rGO nanocomposites are effective photocatalysts and may one day serve as the ideal material to reduce water pollution.

Progress in semiconductor materials for photocathodic protection: Design strategies and applications in marine corrosion protection

Metal protection of offshore equipment is very complicated owing to the complex marine environment. Photocathodic protection (PCP) is one of the popular research topics in marine metal protection. The protection efficiency of photoanode depends largely on the photoelectric properties of semiconductor materials, viz. the process of charge separation, charge migration, and light absorption. In this article, the enhancement strategies, photoelectrochemical properties, and electron transfer mechanisms of different composites for PCP were reviewed and highlighted. Some photoanodes with unusual and striking properties were emphasized. In addition, the outlooks and challenges of the application of PCP and the design of photoanodes materials are proposed.

A Lead-Free 0D/2D Cs3Bi2Br9/Bi2WO6 S-Scheme Heterojunction for Efficient Photoreduction of CO2

Photocatalytic reduction of CO2 into valuable hydrocarbon fuels is one of the green ways to solve the energy problem and achieve carbon neutrality. Exploring photocatalyst with low toxicity and high-efficiency is the key to realize it. Here we report a lead-free halide perovskite-based 0D/2D Cs3Bi2Br9/Bi2WO6 (CBB/BWO) S-scheme heterojunction for CO2 photoreduction, prepared by a facile electrostatic self-assembly approach. The CBB/BWO shows superior photoreduction of CO2 under visible light with CO generation rate of 220.1 μmol·g-1·h-1, which is ∼115.8 and ∼18.5 times higher than that of Cs3Bi2Br9 perovskite quantum dots (CBB PQDS) and Bi2WO6 nanosheets (BWO NS), respectively. The improved photocatalytic activity can be attributed to the tight 0D/2D structure and S-scheme charge transfer pathway between the Cs3Bi2Br9 PQDS and atomic layers of the Bi2WO6 NS, which shortens transmission distance of photogenerated carriers and boosts efficient separation and transfer of the carriers. This work provides insight in manufacturing potential lead-free perovskite-based photocatalysts for achieving carbon neutrality.

Enhancing mechanical and photocatalytic properties by surface microstructure regulation of TiO2 nanofiber membranes

In this work, TiO₂ nanofiber membrane (NFM) with a complete surface microstructure was prepared through regulating the surface microstructure of TiO₂ NFM by doping Zr. The crystal structures and morphological analyses indicated that the nanofiber membranes were consisted by disordered accumulation of Zr-doped TiO₂ nanofibers with a crack-free surface, small grain size and high aspect ratio. When the doping amount of Zr was 0.8 mL, the tensile strength of the doped membranes reached 1.27 MPa, which was 60.7% higher than that of pure TiO₂ NFM. The photocatalytic performance of Zr-doped TiO₂ NFM was evaluated by the degradation performance of Methylene orange (MO) under simulated sunlight irradiation. Compared with the undoped TiO₂ NFM, the 0.8-Zr/TiO₂ NFM presented a higher catalytic degradation efficiency (improved by 69.6%), and the photocatalytic performance maintained stable after five circulating. It was found that the doping of Zr ions effectively limited the surface crack size and grain size of TiO₂ nanofibers, thereby improving the tensile strength, and enhanced the surface area effect and carrier transfer efficiency of TiO₂ NFM. On the other hand, a narrow band-gap was obtained by doping a small amount of Zr ions, which expanded the visible light response range to improve the photocatalytic performance of TiO₂ nanofibers.

Constructing Z-scheme NiMoO4@Co3O4 core-shell heterogeneous architectures with prominent photoelectrocatalytic performance toward water purification

Photoelectrocatalysis (PEC) oxidation is an efficient and eco-friendly advanced oxidation process (AOP), which is a hot research topic in the treatment of organic wastewater. The selection of superior photoelectrode materials is the critical factor affecting PEC efficiency and the main challenge in practical application. In this work, novel NiMoO₄@Co₃O₄ hierarchical core-shell heterogeneous photoanodes were prepared through a two-step hydrothermal method and exhibited superior catalytic performance in the degradation of reactive brilliant blue KN-R. The wrapping of NiMoO₄ nanosheets on Co₃O₄ nanowires electrode can enlarge its contact area with electrolyte, enable fast redox reaction and improve the long-term durability. The unique Z-scheme heterojunction structure between the two components ensured the effective separation of photo-generated carriers, facilitating the generation of OH and O^2- during the PEC degradation process. The optimal NiMoO₄@Co₃O₄-1.25 hierarchical architecture anode catalyst exhibited the highest removal rate of 83.65% of reactive brilliant blue KN-R in 120 min with long-term stability (∼12000 s) in 1.0 mol·L^-1 H₂SO₄ solution. This report may inspire the design and fabrication of heterostructure photoanode in water purification.

CdS Nanoparticles Decorated 1D CeO2 Nanorods for Enhanced Photocatalytic Desulfurization Performance

CdS nanoparticles were constructed onto one-dimensional (1D) CeO2 nanorods by a two-step hydrothermal method. The X-ray diffraction (XRD), transmission election microscopy (TEM), Raman spectra, X-ray photoelectron spectra (XPS) and UV-Vis diffuse reflection spectroscopy (DRS) techniques were used to characterize these CdS/CeO2 nanocomposites. It was concluded that when the molar ratio of CdS and CeO2 was 1:1, the nanocomposites exhibited the best photocatalytic desulfurization activity, reaching 92% in 3 h. Meanwhile, transient photocurrent (PT) measurement, photoluminescence (PL) spectra and electrochemical impedance spectroscopy (EIS) measurement indicated that the modification of CeO2 nanorods by CdS nanoparticles could significantly inhibit the recombination of photogenerated electrons and holes. In addition, the possible mechanism of photocatalytic oxidation desulfurization of the nanocomposites was proposed. This study may provide an effective CeO2-based photocatalyst for photocatalytic desulfurization applications.

Direct observation of carrier migration in heterojunctions to discuss the p-n and direct Z-scheme heterojunctions

Type II p-n heterojunction and direct Z-scheme heterojunction are identical staggered band alignments, but were reported ambiguously in many composite photocatalysts because their carriers migrate in opposite directions. In this research, metal oxides CuO, NiO and Co₃O₄-based heterojunctions with Na_0.9Mg_0.45Ti_3.55O₈(NMTO) were synthesized via a simple hydrothermal method. The CuO/NMTO heterojunction was demonstrated as a direct Z-scheme heterojunction, whereas the NiO/NMTO and Co₃O₄/NMTO heterojunctions showed type II p-n band alignment, distinguished by the direct observation of carrier migration under light illumination, and confirmed by the x-ray photoelectron spectroscopy, Mott-Schottky measurements, ultraviolet photoelectron spectra and capture experiments. These all heterojunctions enjoyed better photocatalytic performance to degrade methylene blue and antibiotics (Enrofloxacin, Metronidazole and tetracycline) than the pure NMTO, attributed to their effective separation of the photoinduced electron-hole pairs owing to the staggered band alignment. Prominently, the NiO/NMTO and Co₃O₄/NMTO p-n heterojunctions exhibited superior degradation ability to the CuO/NMTO Z-scheme heterojunction. The initial relative Fermi position of two semiconductors is the prerequisite to determine whether the p-n heterojunction or direct Z-scheme heterojunction is built because the electrons diffuse from one semiconductor with a higher Fermi level to another with a lower Fermi level while the holes diffuse reversely until a united Fermi level when they combine. The built-in electric field at the heterojunction interface is determined by the difference in the initial Fermi levels or work functions of two semiconductors, regulating the separation ability of photogenerated electrons and holes to affect the photocatalytic performance. Thus, the high difference in the initial Fermi levels of semiconductors is crucial in the development of heterojunctions with staggered band alignment to obtain high performance in photocatalytic reactions.

Carbon nitride-based Z-scheme heterojunctions for solar-driven advanced oxidation processes

Solar-driven advanced oxidation processes (AOPs) via direct photodegradation or indirect photocatalytic activation of typical oxidants, such as hydrogen peroxide (H₂O₂), peroxymonosulfate (PMS), and peroxydisulfate (PDS), have been deemed to be an efficient technology for wastewater remediation. Artificial Z-scheme structured materials represent a promising class of photocatalysts due to their spatially separated charge carriers and strong redox abilities. Herein, we summarize the development of metal-free graphitic carbon nitride (g-C₃N₄, CN)-based direct and indirect Z-scheme photocatalysts for solar-driven AOPs in removing organic pollutants from water. In the work, the classification of AOPs, definition and validation of Z-schemes are summarized firstly. The innovative engineering strategies (e.g., morphology and dimensionality control, element doping, defect engineering, cocatalyst loading, and tandem Z-scheme construction) over CN-based direct Z-scheme structure are then examined. Rational design of indirect CN-based Z-scheme systems using different charge mediators, such as solid conductive materials and soluble ion pairs, is further discussed. Through examining the relationship between the Z-scheme structure and activity (charge transfer and separation, light absorption, and reaction kinetics), we aim to provide more insights into the construction strategies and structure modification on CN-based Z-schemes towards improving their catalytic performances in AOPs. Lastly, limitations, challenges, and perspectives on future development in this emerging field are proposed.

Construction of Ultrafine Ag2S NPs Anchored onto 3D Network Rodlike Bi2SiO5 and Insight into the Photocatalytic Mechanism

A novel three-dimensional (3D) network rodlike Ag₂S/Bi₂SiO₅ photocatalyst with a p-n heterostructure composed of ultrafine Ag₂S nanoparticles (NPs) and Bi₂SiO₅ nanosheets was prepared using an anionic self-regulation strategy by a two-step hydrothermal process. The architecture facilitated the efficient transfer and separation of photogenerated electron-hole pairs. The optimal Ag₂S/Bi₂SiO₅ composite (ABSO_0.10) exhibited an excellent reduction activity (93.5% Cr(VI) removal in wastewater containing 50 mg·L^-1 Cr(VI) within 90 min under visible light), which was about 11.2 and 25.6 times higher than that of the pristine Ag₂S and virgin Bi₂SiO₅, respectively. Assisted by experiments and density functional theory (DFT) calculations, a possible photocatalytic mechanism for Cr(VI) reduction over the Ag₂S/Bi₂SiO₅ composite under visible-light irradiation was proposed.

Human Exhalation CO2 Sensor Based on the PEI-PEG/ZnO/NUNCD/Si Heterojunction Electrode

Gas sensors based on semiconductors have outstanding sensitivity compared with the oxide-based devices; however, the high operation temperature greatly hinders its development in practical applications. Chronic obstructive pulmonary disease (COPD) is one of the leading causes of death worldwide, and the patients with severe COPD with or without exacerbation tend to have airflow obstruction, which results in an increase of CO2 concentration and subsequent hypercapnic respiratory failure. At present, COPD detection relies on professional operation; however, the patients suffer great discomfort during the arterial blood sampling. All these facts reduce patient's willingness to test their physical health. Thus, noninvasive monitoring of CO2 levels is crucial for the early diagnosis of high-risk COPD patients. A nitrogen-incorporated ultrananocrystalline diamond (NUNCD) film exhibits excellent properties in biosensing and polyetherimide-polyethylene glycol (PEI-PEG) polymer possesses a great capability of CO2 capturing. By incorporating NUNCD into PEI-PEG film, this work focuses on ameliorating the sensitivity and selectivity of the present semiconductor CO2 sensor. From the theoretical regression analyses of the experimental results, it is found that the excellent performance of the PEI-PEG/ZnO/NUNCD/Si electrode is contributed by two main reaction layers, the adsorption layer (PEI-PEG) and the electric transfer layer (ZnO/NUNCD). The selectivity is dominated by the PEI-PEG adsorption layer and the sensitivity is directly related to the changes in the work function of the ZnO/NUNCD interface. The high aspect ratio (>10) of the flower-like ZnO structure, growth from ZnO nanoparticles, can provide a more active adsorption area, as a result, extremely enhancing the sensitivity of the CO2 sensor.

Photoactive nanomaterials enabled integrated photo-rechargeable batteries

The research interest in energy storage systems (e.g. batteries and capacitors) has been increasing over the last years. The rising need for electricity storage and overcoming the intermittent nature of renewable energy sources have been potent drivers of this increase. Solar energy is the most abundant renewable energy source. Thus, the combination of photovoltaic devices with energy storing systems has been pursued as a novel approach in applications such as electric vehicles and smart grids. Among all the possible configurations, the "direct" incorporation of photoactive materials in the storing devices is most attractive because it will enhance efficiency and reduce volume/weight compared to conventional systems comprised two individual devices. By generating and storing electricity in a singular device, integrated photo-rechargeable batteries offer a promising solution by directly storing electricity generated by sunlight during the day and reversibly releasing it at night time. They hold a sizable potential for future commercialization. This review highlights cutting-edge photoactive nanomaterials serving as photoelectrodes in integrated photobatteries. The importance and influence of their structure and morphology and relevant photocatalytic mechanisms will be focal points, being strong influencers of device performance. Different architecture designs and working principles are also included. Finally, challenges and limitations are discussed with the aim of providing an outlook for further improving the performance of integrated devices. We hope this up-to-date, in-depth review will act as a guide and attract more researchers to this new, challenging field, which has a bright application prospect.

Recent progress of noble metals with tailored features in catalytic oxidation for organic pollutants degradation

With the increasing serious water pollutions, an increasing interest has given for the nanocomposites as environmental catalysts. To date, noble metals-based nanocomposites have been extensively studied by researchers in environmental catalysis. In detail, serving as key functional parts, noble metals are usually combined with other nanomaterials for rationally designing nanocomposites, which exhibit enhanced catalytic properties in pollutants removal. Noble metals in the nanocomposites possess tailored properties, thus playing different important roles in catalytic oxidation reactions for pollutants removal. To motivate the research and elaborate the progress of noble metals, this review (i) summarizes advanced characterization techniques and rising technology of theoretical calculation for evaluating noble metal, and (ii) classifies the roles according to their disparate mechanism in different catalytic oxidation reactions. Meanwhile, the enhanced mechanism and influence factors are discussed. (iii) The conclusions, facing challenges and perspectives are proposed for further development of noble metals-based nanocomposites as environmental catalysts.

A S-scheme heterojunction constructed by α-Fe2O3 and In-doped carbon nitride for high-efficiency CO2 photoreduction

The conversion of CO2 to chemicals and fuels by photocatalysis provides a promising strategy to solve both energy crisis and environmental impacts, for which the development of high-activity photocatalysts is...

Progress on photocatalytic semiconductor hybrids for bacterial inactivation

Due to its use of green and renewable energy and negligible bacterial resistance, photocatalytic bacterial inactivation is to be considered a promising sterilization process. Herein, we explore the relevant mechanisms of the photoinduced process on the active sites of semiconductors with an emphasis on the active sites of semiconductors, the photoexcited electron transfer, ROS-induced toxicity and interactions between semiconductors and bacteria. Pristine semiconductors such as metal oxides (TiO₂ and ZnO) have been widely reported; however, they suffer some drawbacks such as narrow optical response and high photogenerated carrier recombination. Herein, some typical modification strategies will be discussed including noble metal doping, ion doping, hybrid heterojunctions and dye sensitization. Besides, the biosafety and biocompatibility issues of semiconductor materials are also considered for the evaluation of their potential for further biomedical applications. Furthermore, 2D materials have become promising candidates in recent years due to their wide optical response to NIR light, superior antibacterial activity and favorable biocompatibility. Besides, the current research limitations and challenges are illustrated to introduce the appealing directions and design considerations for the future development of photocatalytic semiconductors for antibacterial applications.

Synthesis of a Novel 1D/2D Bi2O2CO3–BiOI Heterostructure and Its Enhanced Photocatalytic Activity

A novel 1D/2D Bi2O2CO3–BiOI heterojunction photocatalyst with high-quality interfaces was synthesized through a hydrothermal method by using Bi2O2CO3 nanorods and KI as raw materials. Two-dimensional (2D) BiOI nanosheets uniformly and vertically grow on the 1D porous Bi2O2CO3 rods. Bi2O2CO3–BiOI heterojunctions exhibit better photocatalytic activity than pure Bi2O2CO3 nanorods and BiOI nanosheets. Cr(VI) (30 mg/L), MO (20 mg/L) and BPA (20 mg/L) can be completely degraded in 8–15 min. The superior photocatalytic performance of 1D/2D Bi2O2CO3–BiOI heterojunction is ascribed to the synergistic effects: (a) vertical 2D on 1D multidimensional structure; (b) the formation of the Bi2O2CO3–BiOI p–n heterojunction; (c) high-quality interfaces between Bi2O2CO3 and BiOI.

Boosting photocatalytic degradation of tetracycline under visible light over hierarchical carbon nitride microrods with carbon vacancies

Graphitic carbon nitride is considered as one of the promising photocatalysts for pollution elimination from wastewater. Manipulating the microstructure of carbon nitride remains a challengeable task, which is essential for improving light absorption, separating photogenerated carrier and creating reactive sites. Herein, a carbon vacancy modified hierarchical carbon nitride microrod (CN1.5) has been prepared templated from a melamine-NH₂OH·HCl complex. The hierarchical microrods are demonstrated to be comprised of interconnected nanosheets with rich carbon vacancies, which endows it with high specific surface area, enhanced light utilization efficiency, available reactive sites, improved charge carrier separation and numerous mass-transport channels. The resultant photocatalyst CN1.5 exhibits an excellent photodegradation efficiency of 87.9% towards tetracycline under visible light irradiation. The remarkable apparent rate constant of 4.91 × 10^-2 min^-1 is 7.3 times higher than that of bulk CN. In addition, the degradation pathways are deduced base on the observation of degradation intermediates generating in the photocatalytic process. Mechanism investigation indicates that the major contribution for photodegradation is attributed to ·O₂^-, ¹O₂ and H₂O₂ species. This work provides new insights into advancing carbon nitride's microstructure to improve photocatalytic degradation performance for highly efficient antibiotic removal and environment remediation.

Improving the photocatalytic activity of benzyl alcohol oxidation by Z-scheme SnS/g-C3N4

The formation of the Z-scheme heterojunction between SnS and g-C₃N₄ facilitates the separation of electrons and holes, thereby increasing the conversion of benzyl alcohol.