Overview of transition metal-based composite materials for supercapacitor electrodes

In situ optimization of deposition layers in Ni-Co phosphate electrodes with ML-assisted predictive validation for superior supercapacitor

The successive ionic layer adsorption and reaction (SILAR) methodology provides an economically viable and uncomplicated strategy for the fabrication of electrode materials intended for applications in energy storage. The present work focuses on synthesizing Ni-Co phosphate nanoparticles on nickel foam (NF) through the controlled deposition of multiple layers using the SILAR method. The amorphous phase of the Ni-Co phosphate on the electrodes was confirmed via XRD analysis. In contrast, the existence of the phosphate group was confirmed through FT-IR and EDS analysis. The XPS analysis shows that nickel and cobalt exist in varying oxidation states of Ni2+/Ni3+ and Co2+/Co3+, facilitating a reversible charge storage process, while phosphorus is present in its pentavalent state. The electrode demonstrated exceptional performance at a current density of 1 mA cm-2, achieving a high areal capacitance of 426.47 mF cm-2 (equivalent to 2132 F g-1). Additionally, it exhibited remarkable rate capability at 5 mA cm-2, retaining 76.4% of the capacitance observed at 1 mA cm-2. Moreover, the material exhibited remarkable cyclic stability following 5000 cycles of charge-discharge at 5 mA cm-2, maintaining 77.92% of its original capacitance in a three-electrode setup. Additionally, the trained ML model showed high predictive accuracy. The predicted capacitance of 2129 F g-1 closely matched the experimental value of 2132 F g-1, demonstrating the model's reliability. These findings underscore the potential of SILAR-grown Ni-Co phosphate for supercapacitor applications, further enhanced by integrating ML for performance prediction.

Two-dimensional nanostructures of transition metal-based materials towards aqueous electrochemical energy storage

Transition metal-based materials have garnered considerable attention in the energy storage field owing to their diverse composition, abundant redox capacity and excellent thermal stability. However, the application of these materials as electrodes for aqueous electrochemical energy storage devices such as aqueous zinc-ion batteries (AZIBs) and supercapacitors (SCs) is impeded by their low conductivity and limited energy density. This challenge can be effectively addressed through structural optimizations of transition metal-based materials. In recent years, extensive research has been conducted on two-dimensional (2D) nanostructured transition metal-based electrodes in the context of AZIBs and SCs, thereby presenting promising prospects for 2D nanostructures of transition metal-based materials. This review provides a comprehensive overview of the synthesis methods for 2D nanostructured materials and presents research findings on 2D nanostructured transition metal-based electrodes in AZIBs and SCs. It analyzes the advantages of 2D nanostructures, focusing on transition metal oxides, hydroxides, and sulfides. Furthermore, it explores the correlation between their structural characteristics and electrochemical properties. Finally, we discuss the main challenges faced by 2D nanostructures of transition metal-based materials and outline future development prospects.

MXenes from MAX phases: synthesis, hybridization, and advances in supercapacitor applications

MXenes, which are essentially 2D layered structures composed of transition metal carbides and nitrides obtained from MAX phases, have gained substantial interest in the field of energy storage, especially for their potential as electrodes in supercapacitors due to their unique properties such as high electrical conductivity, large surface area, and tunable surface chemistry that enable efficient charge storage. However, their practical implementation is hindered by challenges like self-restacking, oxidation, and restricted ion transport within the layered structure. This review focuses on the synthesis process of MXenes from MAX phases, highlighting the different etching techniques employed and how they significantly influence the resulting MXene structure and subsequent electrochemical performance. It further highlights the hybridization of MXenes with carbon-based materials, conducting polymers, and metal oxides to enhance charge storage capacity, cyclic stability, and ion diffusion. The influence of dimensional structuring (1D, 2D, and 3D architectures) on electrochemical performance is critically analyzed, showcasing their role in optimizing electrolyte accessibility and energy density. Additionally, the review highlights that while MXene-based supercapacitors have seen significant advancements in terms of energy storage efficiency through various material combinations and fabrication techniques, key challenges like large-scale production, long-term stability, and compatibility with electrolytes still need to be addressed. Future research should prioritize developing scalable synthesis methods, optimizing hybrid material interactions, and investigating new electrolyte systems to fully realize the potential of MXene-based supercapacitors for commercial applications. This comprehensive review provides a roadmap for researchers aiming to bridge the gap between laboratory research and commercial supercapacitor applications.

Advancements in binary and ternary transition metal-based composites for high-performance supercapacitors: a comprehensive review

As the demand for efficient and high-performance energy storage devices continues to rise, supercapacitors have emerged as a promising technology due to their rapid charge-discharge capabilities and long cycle life. Among the various strategies to enhance supercapacitor performance, binary and ternary transition metal-based composites have garnered significant attention. These composites offer a unique approach by combining multiple transition metals, which synergistically enhance electrochemical performance through both physical and chemical charge storage mechanisms. This review provides an in-depth analysis of the latest research on binary and ternary transition metal composites, discussing their electrochemical properties, synthesis methods, and performance metrics in supercapacitor applications. The combination of different transition metals in composite materials as energy storage electrodes allows for a broader voltage window, increased energy density, enhanced power density, and improved cycling stability. Additionally, we discuss the structural and morphological features of these composite materials, such as porosity, surface area, and conductivity, which play critical roles in determining overall performance. Furthermore, the review highlights the challenges faced in optimizing these composites, including material scalability, cost-effectiveness, and long-term stability. The paper also outlines future research directions, emphasizing the potential of binary and ternary transition metal-based composites in supercapacitor applications, providing insights into potential avenues for the next generation of high-performance energy storage systems. This review thus provides valuable insights into both the current state and future potential of these composite materials in high-performance supercapacitors.

Recent Progress of Flexible Solid-State Supercapacitors: Electrodes, Electrolytes and Practical Application

Flexible solid-state supercapacitors (FSSCs) have garnered significant attention due to their advantages, including lightness, adaptability, enhanced safety, and extensive operational potential windows. These features make them highly suitable as energy storage devices for the next generation of portable and flexible electronics. The recent surge in the development and remarkable breakthroughs in novel wearable electronics have further propelled research into FSSCs. Nevertheless, several pressing issues need to be addressed in this field, including synthesizing flexible electrode materials with superior electrochemical energy storage capabilities, enhancing the physicochemical properties of solid gel polymer electrolytes, particularly in extreme environments, and ensuring effective contact between electrodes and gel electrolytes. This paper presents an overview of the latest advancements in FSSCs, focusing on electrode materials and electrolytes. Additionally, it delves into the current challenges and future prospects of FSSCs.

Ni12P5 and Ni12P5-rGO for multifunctional electrocatalyst and supercapacitor application

Transition metal phosphides are crucial for various environmental and energy applications. In this study, porous Ni12P5 and Ni12P5-rGO were synthesized using a one-step solvothermal method. Red phosphorus served as the phosphorus source, while ethylene glycol acted as a capping agent to promote the formation of nanomaterials within a nitrogen-rich atmosphere. The catalytic performance of these materials was evaluated through their hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and capacitance properties. Notably, Ni12P5-rGO exhibited Tafel slopes of 66 mV/dec for OER and 33 mV/dec for HER, indicating enhanced charge transfer efficiency compared to Ni12P5, which showed slopes of 78 mV/dec and 102 mV/dec, respectively. This improvement suggests that Ni12P5-rGO facilitates faster electron transfer, resulting in superior catalytic performance. Additionally, the synergistic effect of reduced graphene oxide (rGO) contributes to improved charge storage capabilities. The Ni12P5-rGO demonstrated a specific capacitance of 192 F/g, significantly higher than the 110 F/g observed for Ni12P5 at a current density of 1 A/g. Remarkably, these materials maintained their capacity over 5000 cycles, achieving a commendable 98 % coulombic efficiency. These findings highlight the potential of Ni12P5-rGO as an effective material for energy conversion and storage applications, showcasing its promising role in advancing the efficiency of related technologies.

Recent Development on Transition Metal Oxides-Based Core-Shell Structures for Boosted Energy Density Supercapacitors

In recent years, nanomaterials exploration and synthesis have played a crucial role in advancing energy storage research, particularly in supercapacitor development. Researchers have diversified materials, including metal oxides, chalcogenides, and composites, as well as carbon materials, to enhance energy and power density. Balancing energy density with electrochemical stability remains challenging, driving intensified efforts in advancing electrode materials. This review focuses on recent progress in designing and synthesizing core-shell materials tailored for supercapacitors. The core-shell architecture offers advantages such as increased surface area, redox active sites, electrical conductivity, ion diffusion kinetics, specific capacitance, and cyclability. The review explores the impact of core and shell materials, specifically transition metal oxides (TMOs), on supercapacitor electrochemical behavior. Metal oxide choices, such as cobalt oxide as a preferred core and manganese oxide as a shell, are discussed. The review also highlights characterization techniques for assessing structural, morphological, and electrochemical properties of core-shell materials. Overall, it provides a comprehensive overview of ongoing TMOs-based core-shell material research for supercapacitors, showcasing their potential to enhance energy storage for applications ranging from gadgets to electric vehicles. The review outlines existing challenges and future opportunities in evolving TMOs-based core-shell materials for supercapacitor advancements, holding promise for high-efficiency energy storage devices.

Scalable solid-state synthesis of 2D transition metal oxide/graphene hybrid materials and their utilization for microsupercapacitors

Two-dimensional metal oxide (MO) nanostructures have unique properties compared with their bulk or 0D and 1D (nanoparticle and nanowire) counterparts. Their abundant surface area and atomically thin 2D structure are advantageous for their applications in catalysis and energy, as well as integration with 2D layered materials such as graphene and reduced graphene oxide (rGO). However, fast and scalable synthesis of 2D MOs and their nanocomposites remains challenging. Here, we developed a microwave-assisted solid-state synthesis method for the scalable generation of 2D MOs and 2D MO/rGO nanocomposites with tunable structure and composition. The structures and properties of 2D Fe2O3 and 2D ZnO as well as their nanocomposites with rGO were systematically investigated. The excellent electrochemical properties of such 2D MO/rGO nanocomposites also enable us to use them as electrode materials to fabricate microsupercapacitors. This work provides new insights into the scalable and solid-state synthesis of 2D nanocomposites and their potential applications in catalysis, energy conversion and storage.

Supercapacitors: An Efficient Way for Energy Storage Application

To date, batteries are the most widely used energy storage devices, fulfilling the requirements of different industrial and consumer applications. However, the efficient use of renewable energy sources and the emergence of wearable electronics has created the need for new requirements such as high-speed energy delivery, faster charge-discharge speeds, longer lifetimes, and reusability. This leads to the need for supercapacitors, which can be a good complement to batteries. However, one of their drawbacks is their lower energy storage capability, which has triggered worldwide research efforts to increase their energy density. With the introduction of novel nanostructured materials, hierarchical pore structures, hybrid devices combining these materials, and unconventional electrolytes, significant developments have been reported in the literature. This paper reviews the short history of the evolution of supercapacitors and the fundamental aspects of supercapacitors, positioning them among other energy-storage systems. The main electrochemical measurement methods used to characterize their energy storage features are discussed with a focus on their specific characteristics and limitations. High importance is given to the integral components of the supercapacitor cell, particularly to the electrode materials and the different types of electrolytes that determine the performance of the supercapacitor device (e.g., storage capability, power output, cycling stability). Current directions in the development of electrode materials, including carbonaceous forms, transition metal-based compounds, conducting polymers, and novel materials are discussed. The synergy between the electrode material and the current collector is a key factor, as well as the fine-tuning of the electrode material and electrolyte.

Efficient pH-universal aqueous supercapacitors enabled by an azure C-decorated N-doped graphene aerogel

Current aqueous supercapacitors (SCs) possess the relative low energy density, and there is therefore widespread interest in cost-effective fabrication of capacitive materials with promoted specific capacitance and/or broadened voltage window. Here, a redox-active azure C-decorated N-doped graphene aerogel (AC - NGA) is fabricated using a simple hydrothermal self-assembly method through strong noncovalent π-π interaction. AC - NGA highlights an excellent charge storage performance (a high 591F g-1 gravimetric capacitance under a current density of 1.0 A g-1 and ultrahigh voltage window of 2.3 V) under pH-universal conditions. The capacitive contribution of charge storage is 91.7%, exceeding or comparable to those of the best pseudocapacitors known. Furthermore, a symmetric AC - NGA//AC - NGA device realizes high energy and power densities (15.2-60.2 Wh kg-1 at 650-23,000 W kg-1) and excellent cycling stability in acidic, neutral, and basic aqueous solutions. This work offers a cost-effective strategy to combine redox dye molecules with heteroatom-doped graphene aerogel for building green efficient pH-universal aqueous supercapacitors.

Mechanochemical Pretreated Mn+1AXn (MAX) Phase to Synthesize 2D-Ti3C2Tx MXene Sheets for High-Performance Supercapacitors

Two-dimensional (2D) MXenes sheet-like micro-structures have attracted attention as an effective electrochemical energy storage material due to their efficient electrolyte/cation interfacial charge transports inside the 2D sheets which results in ultrahigh rate capability and high volumetric capacitance. In this article, Ti₃C₂T_x MXene is prepared by a combination of ball milling and chemical etching from Ti₃AlC₂ powder. The effects of ball milling and etching duration on the physiochemical properties are also explored, as well as the electrochemical performance of as-prepared Ti₃C₂ MXene. The electrochemical performances of 6 h mechanochemically treated and 12 h chemically etched MXene (BM-12H) exhibit an electric double layer capacitance behavior with an enhanced specific capacitance of 146.3 F g^-1 compared to 24 and 48 h treated samples. Moreover, 5000-cycle stability tested sample's (BM-12H) charge/discharge show increased specific capacitance due to the termination of the -OH group, intercalation of K⁺ ion and transformation to TiO₂/Ti₃C₂ hybrid structure in a 3 M KOH electrolyte. Interestingly, a symmetric supercapacitor (SSC) device fabricated in a 1 M LiPF₆ electrolyte in order to extend the voltage window up to 3 V shows a pseudocapacitance behavior due to Li on interaction/de-intercalation. In addition, the SSC shows an excellent energy and power density of 138.33 W h kg^-1 and 1500 W kg^-1, respectively. The ball milling pre-treated MXene exhibited an excellent performance and stability due to the increased interlayer distance between the MXene sheets and intercalation and deintercalation of Li⁺ ions.

Fabrication of Porous Carbon Nanofibers from Polymer Blends Using Template Method for Electrode-Active Materials in Supercapacitor

Porous carbon nanofibers (PCNFs) with excellent physical and chemical properties have been considered candidate materials for electrodes used in supercapacitors. Herein, we report a facile procedure to fabricate PCNFs through electrospinning blended polymers into nanofibers followed by pre-oxidation and carbonization. Polysulfone (PSF), high amylose starch (HAS), and phenolic resin (PR) are used as three different kinds of template pore-forming agents. The effects of pore-forming agents on the structure and properties of PCNFs have been systematically studied. The surface morphology, chemical components, graphitized crystallization, and pore characteristics of PCNFs are analyzed by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and nitrogen adsorption and desorption test, respectively. The pore-forming mechanism of PCNFs is analyzed by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Fabricated PCNF-R have a specific surface area as high as ~994 m²/g, a total pore volume as high as ~0.75 cm³/g, and a good graphitization degree. When PCNF-R are used as active materials to fabricate into electrodes, the PCNF-R electrodes show a high specific capacitance ~350 F/g, a good rate capability ~72.6%, a low internal resistance ~0.55 Ω, and an excellent cycling stability ~100% after 10,000 charging and discharging cycles. The design of low-cost PCNFs is expected to be widely applicable for the development of high-performance electrodes for an energy storage field.

Facile Synthesis and Optimization of CrOOH/rGO-Based Electrode Material for a Highly Efficient Supercapacitor Device

New electrode materials for supercapacitor devices are the primary focus of current research into energy-storage devices. Besides, exact control of the proportions of these new materials while forming electrodes for coin cell supercapacitor devices is very important for the large-scale manufacturing or at industrial scale. Here we report a facile synthesis of CrOOH with ascorbic acid and explore an exact composition with reduced graphene oxide to achieve a highly efficient electrode material for supercapacitor devices. The rGO is synthesized by modified Hummer's method followed by reduction with ascorbic acid, whereas ultrasmall CrOOH nanoparticles result via hydrothermal treatment of the reactants Cr(NO₃)₃, NaOH, and ascorbic acid at 120 °C for 12 h. The ultrasmall CrOOH nanoparticles show an amorphous phase with particle size range 3-10 nm and a calculated band gap of 3.28 eV. Six different composites are prepared by varying the proportion of CrOOH and rGO materials and further utilized as active electrode materials for fabrication of the coin cell supercapacitor devices. We report the highest specific capacitance for the 70% CrOOH and 30% rGO composite that exhibits a capacitance of 199.8 mF cm^-2 with a long cyclic stability up to the tested 10,000 charge/discharge cycles. The proposed supercapacitor device exhibits a high energy and power density of 8.26 Wh kg^-1 and 3756.9 W kg^-1, respectively, at Ragone Plot, showing the commercial viability of the device.

Fabrication and Development of Binder-Free Mn-Fe-S Mixed Metal Sulfide Loaded Ni-Foam as Electrode for the Asymmetric Coin Cell Supercapacitor Device

Currently, the fast growth and advancement in technologies demands promising supercapacitors, which urgently require a distinctive electrode material with unique structures and excellent electrochemical properties. Herein, binder-free manganese iron sulfide (Mn-Fe-S) nanostructures were deposited directly onto Ni-foam through a facile one-step electrodeposition route in potentiodynamic mode. The deposition cycles were varied to investigate the effect of surface morphologies on Mn-Fe-S. The optimized deposition cycles result in a fragmented porous nanofibrous structure, which was confirmed using Field Emission Scanning Electron Microscopy (FE-SEM). X-ray photoelectron spectroscopy (XPS) confirmed the presence of Mn, Fe, and S elements. The energy dispersive X-ray spectroscopy and elemental mapping revealed a good distribution of Mn, Fe, and S elements across the Ni-foam. The electrochemical performance confirms a high areal capacitance of 795.7 mF cm-2 with a 24 μWh cm-2 energy density calculated at a 2 mA cm-2 current density for porous fragmented nanofiber Mn-Fe-S electrodes. The enhancement in capacitance is due to diffusive-controlled behavior dominating the capacitator, as shown by the charge-storage kinetics. Moreover, the assembled asymmetric coin cell device exhibited superior electrochemical performance with an acceptable cyclic performance of 78.7% for up to 95,000 consecutive cycles.

Electrodeposition of CoxNiVyOz Ternary Nanopetals on Bare and rGO-Coated Nickel Foam for High-Performance Supercapacitor Application

We report a simple strategy to grow a novel cobalt nickel vanadium oxide (CoxNiVyOz) nanocomposite on bare and reduced-graphene-oxide (rGO)-coated nickel foam (Ni foam) substrates. In this way, the synthesized graphene oxide is coated on Ni foam, and reduced electrochemically with a negative voltage to prepare a more conductive rGO-coated Ni foam substrate. The fabricated electrodes were characterized with a field-emission scanning electron microscope (FESEM), energy-dispersive X-ray spectra (EDX), X-ray photoelectron spectra (XPS), and Fourier-transform infrared (FTIR) spectra. The electrochemical performance of these CoxNiVyOz-based electrode materials deposited on rGO-coated Ni foam substrate exhibited superior specific capacitance 701.08 F/g, which is more than twice that of a sample coated on bare Ni foam (300.31 F/g) under the same experimental conditions at current density 2 A/g. Our work highlights the effect of covering the Ni foam surface with a rGO film to expedite the specific capacity of the supercapacitors. Despite the slightly decreased stability of a CoxNiVyOz-based electrode coated on a Ni foam@rGO substrate, the facile synthesis, large specific capacitance, and preservation of 92% of the initial capacitance, even after running 5500 cyclic voltammetric (CV) scans, indicate that the CoxNiVyOz-based electrode is a promising candidate for high-performance energy-storage devices.

Freestanding Binder-Free Electrodes with Nanodisk-Needle-like MnCuCo-LTH and Mn1Fe2S2 Porous Microthorns for High-Performance Quasi-Solid-State Supercapacitors

Transition-metal-based layered triple hydroxides (LTHs) are evolving as potential positrode candidates for high-performance supercapacitors; however, their phase stabilization is still critical. Alongside, the availability of limited negatrodes pushes research toward exploring novel alternatives in order to minimize performance limitation issues in the fabricated supercapacitors. Herein, a facile strategy for stabilizing freestanding MnCuCo-LTH-based positrode possessing intermingled nanodisk-needle-like morphology is reported. Alongside, novel high-surface-area negatrodes based on Mn₁Fe₂S₂ exhibiting porous microthorn-like morphology are also optimized. MnCuCo_LTH and Mn₁Fe₂S₂ exhibit remarkably high specific capacities of ∼494 mAh g^-1 (∼2540 F g^-1) and ∼429 mAh g^-1 (∼1546 F g^-1), respectively, at 1 A g^-1. The fabricated quasi-solid-state supercapacitor equipped with a poly(vinyl alcohol) (PVA)-KOH gel electrolyte displays a high specific capacity of ∼144 mAh g^-1 and a specific capacitance of ∼325 F g^-1 at 1 A g^-1. The ultrahigh energy cum power traits of ∼105 Wh kg^-1 (1 A g^-1) and ∼8370 W kg^-1 (at 10 A g^-1) establish an asymmetric supercapacitor as a high-performance energy storage device. This device shows an appreciably high cycling life with a capacitance retention of ∼93% after 10 000 consecutive cycles, at 10 A g^-1. This approach provides a neoteric foresight for developing high-performance advanced energy storage devices equipped with cheaper and eco-friendly components.

"Porous and Yet Dense" Electrodes for High-Volumetric-Performance Electrochemical Capacitors: Principles, Advances, and Challenges

With the ever-rapid miniaturization of portable, wearable electronics and Internet of Things, the volumetric performance is becoming a much more pertinent figure-of-merit than the conventionally used gravimetric parameters to evaluate the charge-storage capacity of electrochemical capacitors (ECs). Thus, it is essential to design the ECs that can store as much energy as possible within a limited space. As the most critical component in ECs, "porous and yet dense" electrodes with large ion-accessible surface area and optimal packing density are crucial to realize desired high volumetric performance, which have demonstrated to be rather challenging. In this review, the principles and fundamentals of ECs are first observed, focusing on the key understandings of the different charge storage mechanisms in porous electrodes. The recent and latest advances in high-volumetric-performance ECs, developed by the rational design and fabrication of "porous and yet dense" electrodes are then examined. Particular emphasis of discussions then concentrates on the key factors impacting the volumetric performance of porous carbon-based electrodes. Finally, the currently faced challenges, further perspectives and opportunities on those purposely engineered porous electrodes for high-volumetric-performance EC are presented, aiming at providing a set of guidelines for further design of the next-generation energy storage devices.

Hierarchical flower-like architecture of nickel phosphide anchored with nitrogen-doped carbon quantum dots and cobalt oxide for advanced hybrid supercapacitors

The exploitation of hybrid supercapacitors with excellent electrochemical properties is of great significance for energy storage systems. Herein, a three-dimensional hierarchical flower-like architecture of nickel phosphide (Ni₂P) decorated with nitrogen-doped carbon quantum dots (N-CQDs) and cobalt oxide (Co₃O₄) is constructed by an effective two-step hydrothermal strategy followed by in situ phosphorization process. Introducing N-CQDs with superior electrochemical characteristics can not only induce the formation of N-CQDs deposited nickel hydroxide (Ni(OH)₂) flower-like architecture but also significantly enhance the electrochemical features of Ni(OH)₂ nanosheets. After combination with Co₃O₄ nanoparticles and phosphorization treatment, an advanced cathode of Ni₂P/Co₃O₄/N-CQDs with enriched surface phosphate ions is obtained, which possesses an ultra-high capacity of 1044 C g^-1 (2088 F g^-1) at 1 A g^-1 with a splendid rate capacity of 876 C g^-1 (1752 F g^-1) at 20 A g^-1. Moreover, a device assembled by Ni₂P/Co₃O₄/N-CQDs hierarchical flower-like architecture and p-phenylenediamine functionalized reduced graphene oxide (PPD/rGO) nanosheets depicts a commendable energy density of 53.5 Wh kg^-1 at 772.9 W kg^-1. This work provides a novel hierarchical multi-component electrode material with decent electrochemical capacities for hybrid supercapacitors, which has a broad prospect in energy storage devices.

In Situ Construction of ZnO/Ni2S3 Composite on Ni Foam by Combing Potentiostatic Deposition with Cyclic Voltammetric Electrodeposition

The ZnO/Ni2S3 composite has been designed and in situ synthesized on Ni foam substrate by two steps of electrodeposition. ZnO was achieved on Ni foam by a traditional potentiostatic deposition, followed by cyclic voltammetric (CV) electrodeposition, to generate Ni2S3, where the introduction of ZnO provides abundant active sites for the subsequent Ni2S3 electrodeposition. The amount of deposit during CV electrodeposition can be adjusted by setting the number of sweep segment and scan rate, and the electrochemical characteristics of the products can be readily optimized. The synergistic effect between the ZnO as backbones and the deposited Ni2S3 as the shell enhances the electrochemical properties of the sample significantly, including a highly specific capacitance of 2.19 F cm-2 at 2 mA cm-2, good coulombic efficiency of 98%, and long-term cyclic stability at 82.35% (4000 cycles).

Nano-manganese oxide and reduced graphene oxide-incorporated polyacrylonitrile fiber mats as an electrode material for capacitive deionization (CDI) technology

Capacitive deionization (CDI) is a trending water desalination method during which the impurity ions in water can be removed by electrosorption. In this study, nano-manganese dioxide (MnO2) and reduced graphene oxide (rGO)-doped polyacrylonitrile (PAN) composite fibers are fabricated using an electrospinning technique. The incorporation of both MnO2 and rGO nanomaterials in the synthesized fibers was confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The electrochemical characteristics of electrode materials were examined using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and constant current charge-discharge cycles (CCCDs). The specific capacitance of the PAN electrode increased with increasing MnO2 and rGO contents as well as when thermally treated at 280 °C. Thermally treated composite fibers with 17% (w/w) MnO2 and 1% (w/w) rGO (C-rGOMnPAN) were observed to have the best electrochemical performance, with a specific capacitance of 244 F g-1 at a 10 mV s-1 scan rate. The electrode system was used to study the removal of sodium chloride (NaCl), cadmium (Cd2+) and lead (Pb2+) ions. Results indicated that NaCl showed the highest electrosorption (20 472 C g-1) compared to two heavy metal salts (14 260 C g-1 for Pb2+ and 6265 C g-1 for Cd2+), which is most likely to be due to the ease of mass transfer of lighter Na+ and Cl- ions; When compared, Pb2+ ions tend to show more electrosorption on these fibers than Cd2+ ions. Also, the C-rGOMnPAN electrode system is shown to work with 95% regeneration efficiency when 100 ppm NaCl is used as the electrolyte. Hence, it is clear that the novel binder-free, electrospun C-rGOMnPAN electrodes have the potential to be used in salt removal and also for the heavy metal removal applications of water purification.

The green one-step electrodeposition of oxygen-functionalized porous g-C3N4 decorated with Fe3O4 nanoparticles onto Ni-foam as a binder-free outstanding material for supercapacitors

In this study, the binder-free high-performance nanocomposite of Fe₃O₄/oxygen-functionalized g-C₃N₄ was fabricated through a one-pot electrophoretic-electrochemical (EP-EC) process.