High-performance polymer field-effect transistors: from the perspective of multi-level microstructures

Achieving Ideal and Environmentally Stable n-Type Charge Transport in Polymer Field-Effect Transistors

Realizing ideal charge transport in field-effect transistors (FETs) of conjugated polymers is crucial for evaluating device performance, such as carrier mobility and practical applications of conjugated polymers. However, the current FETs using conjugated polymers as the active layers generally show certain non-ideal transport characteristics and poor stability. Here, ideal charge transport of n-type polymer FETs is achieved on flexible polyimide substrates by using an organic-inorganic hybrid double-layer dielectric. Deposited conjugated polymer films show highly ordered structures and low disorder, which are supported by grazing-incidence wide-angle X-ray scattering, near-edge X-ray absorption fine structure, and molecular dynamics simulations. Furthermore, the organic-inorganic hybrid double-layer dielectric provides low interfacial defects, leading to excellent charge transport in FETs with high electron mobility (1.49 ± 0.46 cm2 V-1 s-1) and ideal reliability factors (102 ± 7%). Fabricated polymer FETs show a self-encapsulation effect, resulting in high stability of the FET charge transport. The polymer FETs still work with high mobility above 1 cm2 V-1 s-1 after storage in air for more than 300 days. Compared with state-of-the-art conjugated polymer FETs, this work simultaneously achieves ideal charge transport and environmental stability in n-type polymer FETs, facilitating rapid device optimization of high-performance polymer electronics.

Diselenophene-Dithioalkylthiophene Based Quinoidal Small Molecules for Ambipolar Organic Field Effect Transistors

This work presents a series of novel quinoidal organic semiconductors based on diselenophene-dithioalkylthiophene (DSpDST) conjugated cores with various side-chain lengths (-thiohexyl, -thiodecyl, and -thiotetradecyl, designated DSpDSTQ-6, DSpDSTQ-10, and DSpDSTQ-14, respectively). The purpose of this research is to develop solution-processable organic semiconductors using dicyanomethylene end-capped organic small molecules for organic field effect transistors (OFETs) application. The physical, electrochemical, and electrical properties of these new DSpDSTQs are systematically studied, along with their performance in OFETs and thin film morphologies. Additionally, the molecular structures of DSpDSTQ are determined through density functional theory (DFT) calculations and single-crystal X-ray diffraction analysis. The results reveal the presence of intramolecular S (alkyl)···Se (selenophene) interactions, which result in a planar SR-containing DSpDSTQ core, thereby promoting extended π-orbital interactions and efficient charge transport in the OFETs. Moreover, the influence of thioalkyl side chain length on surface morphologies and microstructures is investigated. Remarkably, the compound with the shortest thioalkyl chain, DSpDSTQ-6, demonstrates ambipolar carrier transport with the highest electron and hole mobilities of 0.334 and 0.463 cm2 V-1 s-1 , respectively. These findings highlight the excellence of ambipolar characteristics of solution-processable OFETs based on DSpDSTQs even under ambient conditions.

Nonlinear charge and energy transport in anharmonic quasi-two-dimensional systems

We study the localized states of an extra electron in an anisotropic quasi-two-dimensional system in which the electron-lattice interaction and the anharmonicity of the lattice vibrations are dominant in one direction. This model describes layers of polydiacetylene or other polymer chains, beta sheets of polypeptides, multilevel microstructures of conjugated polymers, and other low-dimensional systems. It is shown that for appropriate parameter values of the system an extra electron can excite a soliton-like mobile wave of the lattice deformation, within which it can get self-trapped. Such a bound state of an electron and the lattice deformation form a nonlinear two-component polaron-like entity, which can propagate with minimum of the energy dissipation. Our findings are based on the variational approach and the full numerical solution of the coupled system of nonlinear equations. These results suggest that the experimentally measured charge and energy transport over macroscopic distances in the above-mentioned systems can be provided by the soliton mechanism and thus have a potential impact on the theoretical background of the numerous applications of low-dimensional materials in nanoelectronics.

Contrasting the excited state properties of different conformers of trans- and cis-2,2'-bipyridine oligomers in the gas phase

In this article, we present conformation-dependent photophysical and excited state properties of trans- and cis- BPY oligomers. Oligomers up to tetramers for three conformers, namely, o-, m-, and p-, are constructed and optimized at the B3LYP-D3/def2-SVPD level. The photophysical and excited state properties are interpreted in terms of UV and CD spectra at the RI-ADC(2)/def2-TZVPD level. The UV spectra of oligomers of the m-conformer show high-intensity and red-shifted UV bands compared to o- and p-oligomers. The CD spectra of p-oligomers show intense CD bands compared to o- and p-oligomers in the case of trans-structures. In contrast, oligomers of each conformer of cis-structures show high-intensity CD bands. The excited states of (BPY)2 and (BPY)4 are also characterized by analysis of one-electron transition density matrix considering three descriptors: ωCT, dexc, and PRNTO. The ωCT values of dimers are in the range of 0.06-0.32, which indicates the excited states are mainly LE states, whereas, for (BPY)4, the ωCT values range from 0.17 to 0.53, indicating the possibility of partial CT in the excited states. These observations are also explained using the NTOs and e-h correlation plots.

Unfolding the Correlation between Solution Aggregation and Solid-State Crystal Orientation in Donor-Acceptor Copolymers via Solvent Additive Processing

Tailoring the crystal orientation of donor-acceptor (D-A) copolymers is vital for boosting the performance of optoelectronic devices. Despite recent advances in controlling the crystal orientation of D-A copolymers in films, the investigation into their aggregates in solution and the correlation between the solution aggregates and solid-state crystal orientation has been limited. Herein, an effective solvent additive strategy is reported for tuning solution aggregates and the consequent solid-state structures of poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)). Specifically, the addition of 1-decanethiol (10-thiol) to the P(NDI2OD-T2) chloroform solution promoted the aggregation of P(NDI2OD-T2) chains because of the improved planarization of the backbones, which changed their crystal orientation in the film from coexisting edge-on and face-on to dominant edge-on when produced by drop-casting. The mechanism of this crystal orientation transformation is elucidated based on the interaction between 10-thiol and the side chains of P(NDI2OD-T2). The optical properties of P(NDI2OD-T2) films with different crystalline structures are closely correlated. Notably, the 10-thiol-enabled facile tailoring of the crystal orientation in P(NDI2OD-T2) can be readily applied to other D-A copolymers of interest. The findings of this study highlight a robust solvent additive strategy for regulating solution aggregates and crystal orientation in D-A copolymer films, which have applications in many optoelectronic devices.

Backbone Engineering of Monodisperse Conjugated Polymers via Integrated Iterative Binomial Synthesis

Synthesis of sequence-defined monodisperse π-conjugated polymers with versatile backbones remains a substantial challenge. Here we report the development of an integrated iterative binomial synthesis (IIBS) strategy to enable backbone engineering of conjugated polymers with precisely controlled lengths and sequences as well as high molecular weights. The IIBS strategy capitalizes on the use of phenol as a surrogate for aryl bromide and represents the merge between protecting-group-aided iterative synthesis (PAIS) and iterative binomial synthesis (IBS). Long and monodisperse conjugated polymers with diverse irregular backbones, which are inaccessible by conventional polymerizations, can be efficiently prepared by IIBS. In addition, topology-dependent and chain-length-dependent properties have been investigated.

Visualizing the multi-level assembly structures of conjugated molecular systems with chain-length dependent behavior

It remains challenging to understand the structural evolution of conjugated polymers from single chains to solvated aggregates and film microstructures, although it underpins the performance of optoelectrical devices fabricated via the mainstream solution processing method. With several ensemble visual measurements, here we unravel the morphological evolution process of a model system of isoindigo-based conjugated molecules, including the hidden molecular assembly pathways, the mesoscale network formation, and their unorthodox chain dependence. Short chains show rigid chain conformations forming discrete aggregates in solution, which further grow to form a highly ordered film that exhibits poor electrical performance. In contrast, long chains exhibit flexible chain conformations, creating interlinked aggregates networks in solution, which are directly imprinted into films, forming interconnective solid-state microstructure with excellent electrical performance. Visualizing multi-level assembly structures of conjugated molecules provides a deep understanding of the inheritance of assemblies from solution to solid-state, accelerating the optimization of device fabrication.

Efficient and air-stable n-type doping in organic semiconductors

Chemical doping of organic semiconductors (OSCs) enables feasible tuning of carrier concentration, charge mobility, and energy levels, which is critical for the applications of OSCs in organic electronic devices. However, in comparison with p-type doping, n-type doping has lagged far behind. The achievement of efficient and air-stable n-type doping in OSCs would help to significantly improve electron transport and device performance, and endow new functionalities, which are, therefore, gaining increasing attention currently. In this review, the issue of doping efficiency and doping air stability in n-type doped OSCs was carefully addressed. We first clarified the main factors that influenced chemical doping efficiency in n-type OSCs and then explain the origin of instability in n-type doped films under ambient conditions. Doping microstructure, charge transfer, and dissociation efficiency were found to determine the overall doping efficiency, which could be precisely tuned by molecular design and post treatments. To further enhance the air stability of n-doped OSCs, design strategies such as tuning the lowest unoccupied molecular orbital (LUMO) energy level, charge delocalization, intermolecular stacking, in situ n-doping, and self-encapsulations are discussed. Moreover, the applications of n-type doping in advanced organic electronics, such as solar cells, light-emitting diodes, field-effect transistors, and thermoelectrics are being introduced. Finally, an outlook is provided on novel doping ways and material systems that are aimed at stable and efficient n-type doped OSCs.

Side-Chain-Assisted Transition of Conjugated Polymers from a Semiconductor to Conductor and Comparison of Their NO2 Sensing Characteristics

To investigate the effect of a side chain on the electrical properties of a conjugated polymer (CP), we designed two different CPs containing alkyl and ethylene glycol (EG) derivatives as side chains on the same conjugated backbone with an electron donor-acceptor (D-A) type chain configuration. PTQ-T with an alkyl side chain showed typical p-type semiconducting properties, whereas PTQ-TEG with an EG-based side chain exhibited electrically conductive behavior. Both CPs generated radical species owing to their strong D-A type conjugated structure; however, the spin density was much greater in PTQ-TEG. X-ray photoelectron spectroscopy analysis revealed that the O atoms of the EG-based side chains in PTQ-TEG were intercalated with the conjugated backbone and increased the carrier density. Upon application to a field-effect transistor sensor for PTQ-T and resistive sensor for PTQ-TEG, PTQ-TEG exhibited a better NO₂ detection capability with faster signal recovery characteristics than PTQ-T. Compared with the relatively rigid alkyl side chains of PTQ-T, the flexible EG-based side chains in PTQ-TEG have a higher potential to enlarge the free volume as well as improve NO₂-affinity, which promotes the diffusion of NO₂ in and out of the PTQ-TEG film, and ultimately resulting in better NO₂ detection capabilities.

Oligoaniline-assisted self-assembly of polyaniline crystals

The conductivity and charge transport mobility of conjugated polymers (CPs) are largely correlated with their degree of crystallinity, rendering the crystallization of CPs an important endeavour. However, such tasks can be challenging, especially in the absence of sidechain functionalization. In this study, we demonstrate that the incorporation of a small amount of oligomers, specifically tetraaniline, can induce crystallization of the parent polymer, polyaniline, through a single-step self-assembly process. The resulting crystals are compositionally homogeneous because the oligomers and their parent polymer share the same repeating unit and are both electroactive. Mechanistic studies reveal that the tetraaniline forms a crystalline seed that subsequently guides the assembly of polyaniline due to their structural similarities. Applying this oligomer-assisted crystallization approach to polyaniline with defined molecular weights resulted in single crystalline nanowires for 5000 Da polyaniline, and nanowires with strong preferential chain orientation for those with molecular weights between 10 000 and 100 000 Da. Absorption studies reveal that the polymer chains are in an expanded conformation, which likely contributed to the high degree of packing order. Two-probe, single nanowire measurements show that the crystals have conductivity as high as 19.5 S cm^-1. This method is simple, general, and can potentially be applied to other CPs.

Engineering Multi-Scale Organization for Biotic and Organic Abiotic Electroactive Systems

Multi-scale organization of molecular and living components is one of the most critical parameters that regulate charge transport in electroactive systems-whether abiotic, biotic, or hybrid interfaces. In this article, an overview of the current state-of-the-art for controlling molecular order, nanoscale assembly, microstructure domains, and macroscale architectures of electroactive organic interfaces used for biomedical applications is provided. Discussed herein are the leading strategies and challenges to date for engineering the multi-scale organization of electroactive organic materials, including biomolecule-based materials, synthetic conjugated molecules, polymers, and their biohybrid analogs. Importantly, this review provides a unique discussion on how the dependence of conduction phenomena on structural organization is observed for electroactive organic materials, as well as for their living counterparts in electrogenic tissues and biotic-abiotic interfaces. Expansion of fabrication capabilities that enable higher resolution and throughput for the engineering of ordered, patterned, and architecture electroactive systems will significantly impact the future of bioelectronic technologies for medical devices, bioinspired harvesting platforms, and in vitro models of electroactive tissues. In summary, this article presents how ordering at multiple scales is important for modulating transport in both the electroactive organic, abiotic, and living components of bioelectronic systems.

Solution-Processed Isoindigo- and Thienoisoindigo-Based Donor-Acceptor-Donor π-Conjugated Small Molecules: Synthesis, Morphology, Molecular Packing, and Field-Effect Transistor Characterization

Molecular design and precise control of thin-film morphology and crystallinity of solution-processed small molecules are important for enhancing charge transport mobility of organic field-effect transistors and gaining more insight into the structure-property relationship. Here, two donor-acceptor-donor (D-A-D) architecture small molecules TRA-IID-TRA and TRA-TIID-TRA comprising an electron-donating triarylamine (TRA) and two different electron-withdrawing cores, isoindigo (IID) and thienoisoindigo (TIID), respectively, were synthesized and characterized. Replacing the phenylene rings of central IID A with thiophene gives a TIID core, which reduces the optical band gap and upshifts the energy levels of frontier molecular orbitals. The single-crystal structures and grazing-incidence wide-angle X-ray scattering (GIWAXS) analysis revealed that TRA-TIID-TRA exhibits the relatively tighter π-π stacking packing with preferential edge-on orientation, larger coherence length, and higher crystallinity due to the noncovalent S···O/S···π intermolecular interactions. The distinctly oriented and connected ribbon-like TRA-TIID-TRA crystalline film by the solution-shearing process achieved a superior hole mobility of 0.89 cm² V^-1 s^-1 in the organic field-effect transistor (OFET) device, which is at least five times higher than that (0.17 cm² V^-1 s^-1) of TRA-IID-TRA with clear cracks. Eventually, rational modulation of fused core in the π-conjugated D-A-D small molecule provides a new understanding of structural design for enhancing the performance of solution-processed organic semiconductors.

Crystallization of D-A Conjugated Polymers: A Review of Recent Research

D-A conjugated polymers are key materials for organic solar cells and organic thin-film transistors, and their film structure is one of the most important factors in determining device performance. The formation of film structure largely depends on the crystallization process, but the crystallization of D-A conjugated polymers is not well understood. In this review, we attempted to achieve a clearer understanding of the crystallization of D-A conjugated polymers. We first summarized the features of D-A conjugated polymers, which can affect their crystallization process. Then, the crystallization process of D-A conjugated polymers was discussed, including the possible chain conformations in the solution as well as the nucleation and growth processes. After that, the crystal structure of D-A conjugated polymers, including the molecular orientation and polymorphism, was reviewed. We proposed that the nucleation process and the orientation of the nuclei on the substrate are critical for the crystal structure. Finally, we summarized the possible crystal morphologies of D-A conjugated polymers and explained their formation process in terms of nucleation and growth processes. This review provides fundamental knowledge on how to manipulate the crystallization process of D-A conjugated polymers to regulate their film structure.

Regulation of High Miscibility for Efficient Charge-Transport in n-Doped Conjugated Polymers

Strong interchain interactions of conjugated polymers usually result in poor miscibility with molecular dopants, limiting the doping efficiency because of uncontrolled phase separation. We have developed a strategy to achieve efficient charge-transport and high doping miscibility in n-doped conjugated polymers. We solve the miscibility issue through disorder side-chains containing dopants better. Systemic structural characterization reveals a farther side-chain branching point will lead to higher disorders, which provides appropriate sites to accommodate extrinsic molecular dopants without harming original chain packings and charge-transport channels. Therefore, better sustainability of solid-state microstructure is obtained, yielding a stable conductivity even when overloading massive dopants. This work highlights the importance of realizing high host-dopant miscibility in molecular doping of conjugated polymers.

Molecular Design of Stretchable Polymer Semiconductors: Current Progress and Future Directions

Stretchable polymer semiconductors have advanced rapidly in the past decade as materials required to realize conformable and soft skin-like electronics become available. Through rational molecular-level design, stretchable polymer semiconductor films are now able to retain their electrical functionalities even when subjected to repeated mechanical deformations. Furthermore, their charge-carrier mobilities are on par with the best flexible polymer semiconductors, with some even exceeding that of amorphous silicon. The key advancements are molecular-design concepts that allow multiple strain energy-dissipation mechanisms, while maintaining efficient charge-transport pathways over multiple length scales. In this perspective article, we review recent approaches to confer stretchability to polymer semiconductors while maintaining high charge carrier mobilities, with emphasis on the control of both polymer-chain dynamics and thin-film morphology. Additionally, we present molecular design considerations toward intrinsically elastic semiconductors that are needed for reliable device operation under reversible and repeated deformation. A general approach involving inducing polymer semiconductor nanoconfinement allows for incorporation of several other desired functionalities, such as biodegradability, self-healing, and photopatternability, while enhancing the charge transport. Lastly, we point out future directions, including advancing the fundamental understanding of morphology evolution and its correlation with the change of charge transport under strain, and needs for strain-resilient polymer semiconductors with high mobility retention.

Side-Chain Engineering of Conjugated Polymers for High-Performance Organic Field-Effect Transistors

Past decades have witnessed the rapid development of conjugated polymers because of their promising semiconducting properties and applications in organic field-effect transistors (OFETs). Recent studies have shown that side-chain engineering of conjugated polymers is an efficient strategy to increase semiconducting performance. This Perspective focuses on the side-chain modulation of conjugated polymers and evaluating their effects on the performance of OFETs. The challenges and potential applications of functional high-performance OFETs through side-chain engineering are also discussed.

Triphenyleno[1,2-c:7,8-c']bis([1,2,5]thiadiazole) as a V-Shaped Electron-Deficient Unit to Construct Wide-Bandgap Amorphous Polymers for Efficient Organic Solar Cells

The backbone shape of semiconducting polymers strongly affects their electronic properties and morphologies in films, yet the conventional design principle for building blocks focuses on using linear main chains to maintain high crystallinity. Here, we developed a V-shaped unit, triphenyleno[1,2-c:7,8-c']bis([1,2,5]thiadiazole) (TPTz), featuring two 1,2,5-thiadiazole rings fused to a triphenylene core with strong electron-withdrawing properties and an extended conjugation plane. We used TPTz to prepare a highly soluble copolymer, PTPTz-indacenodithiophene (IDT), which exhibited a wide bandgap of 1.94 eV and energy levels suitable for the donor polymer in organic solar cells (OSCs) in combination with non-fullerene acceptors. Despite the amorphous nature of the polymer film, single-junction OSCs with PTPTz-IDT:Y6 as the active layer achieved a power conversion efficiency of 10.4% (J_SC = 19.8 mA cm^-2; V_OC = 0.80 V; fill factor = 0.66), which is the highest value reported for a single-junction OSC with IDT-based donor polymers. This work demonstrates that TPTz is a promising electron-acceptor unit for developing functional polymers with zigzag structures.

Crystalline Domain Formation to Enable High-Performance Polymer Thermoelectrics Inspired by Thermocleavable Materials

Improving the electrical conductivity is an important role in realizing high thermoelectric performance of solution-processable polymers. Herein, a simple and robust approach to boost the mobility and doping efficiency of a diketopyrrolopyrrole-based copolymer with the introduction of thermocleavable side chains (PDPPS-X, where X is the molar ratio of the thermocleavable side chains and alkyl chains) is first provided. Notably, the incorporated thermocleavable groups can be effectively removed after thermal treatment and therefore contribute to the crystalline domain formation via hydrogen-bonded networks, which is critical for conductivity enhancements. Grazing incidence wide-angle X-ray scattering (GIWAXS) patterns give a clear indication that the thermal treatment of PDPPS-5 can greatly improve the structural arrangement, resulting in a significantly enhanced hole mobility (5.4 times that of PDPPS-0 without thermocleavable chains). Compared to PDPPS-0, a larger Fermi level shift is observed after doping PDPPS-5 with FeCl₃, reflecting a better doping efficiency. Consequently, remarkably improved conductivity and power factor are achieved by PDPPS-5 after doping with 0.03 M FeCl₃ at room temperature, which are about 2.2 and 3.5 times higher than that of PDPPS-0 at the same testing condition, respectively. Moreover, PDPPS-5 achieved a maximum power factor of 57.5 μW m^-1 K^-2 at 404 K.

Synthesis of Conjugated Polymers via Transition Metal Catalysed C-H Bond Activation

Transition metal catalysed C-H bond activation chemistry has emerged as an exciting and promising approach in organic synthesis. This allows us to synthesize a wider range of functional molecules and conjugated polymers in a more convenient and more atom economical way. The formation of C-C bonds in the construction of pi-conjugated systems, particularly for conjugated polymers, has benefited much from the advances in C-H bond activation chemistry. Compared to conventional transition-metal catalysed cross-coupling polymerization such as Suzuki and Stille cross-coupling, pre-functionalization of aromatic monomers, such as halogenation, borylation and stannylation, is no longer required for direct arylation polymerization (DArP), which involve C-H/C-X cross-coupling, and oxidative direct arylation polymerization (Ox-DArP), which involves C-H/C-H cross-coupling protocols driven by the activation of monomers' C(sp² )-H bonds. Furthermore, poly(annulation) via C-H bond activation chemistry leads to the formation of unique pi-conjugated moieties as part of the polymeric backbone. This review thus summarises advances to date in the synthesis of conjugated polymers utilizing transition metal catalysed C-H bond activation chemistry. A variety of conjugated polymers via DArP including poly(thiophene), thieno[3,4-c]pyrrole-4,6-dione)-containing, fluorenyl-containing, benzothiadiazole-containing and diketopyrrolopyrrole-containing copolymers, were summarized. Conjugated polymers obtained through Ox-DArP were outlined and compared. Furthermore, poly(annulation) using transition metal catalysed C-H bond activation chemistry was also reviewed. In the last part of this review, difficulties and perspective to make use of transition metal catalysed C-H activation polymerization to prepare conjugated polymers were discussed and commented.

Multi-level aggregation of conjugated small molecules and polymers: from morphology control to physical insights

Aggregation of molecules is a multi-molecular phenomenon occurring when two or more molecules behave differently from discrete molecules due to their intermolecular interactions. Moving beyond single molecules, aggregation usually demonstrates evolutive or wholly emerging new functionalities relative to the molecular components. Conjugated small molecules and polymers interact with each other, resulting in complex solution-state aggregates and solid-state microstructures. Optoelectronic properties of conjugated small molecules and polymers are sensitively determined by their aggregation states across a broad range of spatial scales. This review focused on the aggregation ranging from molecular structure, intermolecular interactions, solution-state assemblies, and solid-state microstructures of conjugated small molecules and polymers. We addressed the importance of such aggregation in filling the gaps from the molecular level to device functions and highlighted the multi-scale structures and properties at different scales. From the view of multi-level aggregation behaviors, we divided the whole process from the molecule to devices into several parts: molecular design, solvation, solution-state aggregation, crystal engineering, and solid-state microstructures. We summarized the progress and challenges of relationships between optoelectronic properties and multi-level aggregation. We believe aggregation science will become an interdisciplinary research field and serves as a general platform to develop future materials with the desired functions.