Tuning the electronic state of CoFe alloy via in-situ partial Co nitridation for enhanced oxygen electrocatalysis in zinc-air battery

The low catalytic activity and high susceptibility to corrosion of CoFe alloys limit their efficiency and stability in oxygen evolution and reduction reactions (OER/ORR). Here, via a partial nitridation strategy, Co5.47N is in-situ formed adjacent to CoFe alloy to construct a well-defined heterointerface within N-doped bamboo-like carbon nanotube (Co5.47N-CoFe/NCNT). As indicated by computational calculations, the interfacial electrons are transferred from Fe atom to Co5.47N in the Co5.47N-CoFe heterojunction, optimizing the adsorption of O-intermediates and accelerating the rate-determining steps (*O to *OH in ORR and *O to *OOH in OER). X-ray absorption spectra confirm that Fe atom loses electrons, increasing its oxidation state. The Fe site in the heterojunction is identified as the primary active site for both ORR and OER, while the Co site in Co5.47N plays an auxiliary role. Thus, Co5.47N-CoFe/NCNT exhibits promising bifunctional activity with a very-low potential difference between ORR and OER (ΔE = 0.645 V). Interestingly, hydroxyl radical primarily induces corrosion of active species (FeOOH/CoOOH) and the structural framework during OER. Co5.47N-CoFe/NCNT-based zinc-air battery shows excellent open-circuit potential (1.56 V) and charge/discharge stability (500 h). This study provides a new strategy to overcome the challenges posed by alloy-based catalysts and pave the way for highly-efficient energy conversion.

Integrating Electronic-Storage Piperazine into Covalent Organic Frameworks for Promoting Oxygen Reduction Reaction

Metal-free covalent organic frameworks (COFs) have emerged as potential electrocatalysts for oxygen reduction reaction (ORR) in new environmental-friendly electrochemical energy conversion technologies. However, their catalytic activity is hindered by inefficient electron transfer from electrodes to catalytic sites along extended frameworks. To overcome this bottleneck, herein, we first incorporated redox-active piperazine units into the COFs to catalyze ORR. The redox-active piperazine units enable to storage electrons, thus accelerate the electron transfer to the catalytic sites. Furthermore, the introduction of ─OH group-containing building blocks induces keto-enol tautomerism (enabling reversible ─OH / ─C═O interconversion), improving framework polarity with a dipole moment of 6.87 Debye (5.8 times increase compared to non-hydroxylated COFs). This polarity enhancement strengthens the intermediates binding ability, thereby improving the catalytic activity. As a result, the optimized PD-COF-OH exhibits a high half-wave potential of 0.76 V, turnover frequency (TOF) of 0.045 s-1, and electrochemically active surface area of 9.4 mF cm-2, surpassing most reported metal-free COFs. Theoretical calculations further reveal synergistic roles of ─OH and ─C═O groups in stabilizing OOH* and OH* intermediates, contributing to the improved catalytic activity. This work establishes a novel design paradigm for catalytic COFs through a rational integration of electron reservoir units and tautomerism-enabled polarity modulation.

Orbital-level band gap engineering of RuO2 for enhanced acidic water oxidation

Developing efficient and stable oxygen evolution reaction electrocatalysts under acidic conditions is crucial for advancing proton-exchange membrane water electrolysers commercialization. Here, we develop a representative strategy through p-orbital atoms (N, P, S, Se) doping in RuO2 to precisely regulate the lattice oxygen-mediated mechanism-oxygen vacancy site mechanism pathway. In situ and ex situ measurements along with theoretical calculations demonstrate that Se doping dynamically adjusts the band gap between the Ru-eg and O-p orbitals during the oxygen evolution reaction process. This modulation accelerates electron diffusion to the external circuit, promotes the lattice oxygen-mediated process, and enhances catalytic activity. Additionally, it facilitates electron feedback and stabilizes oxygen vacancies, thereby promoting the oxygen vacancy site mechanism process and enhancing catalytic stability. The resulting Se-RuOx catalyst achieves efficient proton-exchange membrane water electrolysers performance under industrial conditions with a minimal charge overpotential of 1.67 V to achieve a current density of 1 A cm-2 and maintain long-term cyclability for over 1000 h. This work presents a unique method for guiding the future development of high-performance metal oxide catalysts.

Rational Dual-Atom Design to Boost Oxygen Reduction Reaction on Iron-Based Electrocatalysts

The oxygen reduction reaction (ORR) is critical for energy conversion technologies like fuel cells and metal-air batteries. However, advancing efficient and stable ORR catalysts remains a significant challenge. Iron-based single-atom catalysts (Fe SACs) have emerged as promising alternatives to precious metals. However, their catalytic performance and stability remain constrained. Introducing a second metal (M) to construct Fe─M dual-atom catalysts (Fe─M DACs) is an effective strategy to enhance the performance of Fe SACs. This review provides a comprehensive overview of the recent advancements in Fe-based DACs for ORR. It begins by examining the structural advantages of Fe─M DACs from the perspectives of electronic structure and reaction pathways. Next, the precise synthetic strategies for DACs are discussed, and the structure-performance relationships are explored, highlighting the role of the second metal in improving catalytic activity and stability. The review also covers in situ characterization techniques for real-time observation of catalytic dynamics and reaction intermediates. Finally, future directions for Fe─M DACs are proposed, emphasizing the integration of advanced experimental strategies with theoretical simulations as well as artificial intelligence/machine learning to design highly active and stable ORR catalysts, aiming to expand the application of Fe─M DACs in energy conversion and storage technologies.

Hollow carbon nanoreactors integrating NiFe-LDH nanodots with adjacent La single atoms for efficient oxygen electrocatalytic reactions

Optimizing both mass transport and electronic structure of the active component is of interest to obtain electrocatalysts with superior oxygen evolution reaction (OER) performance. Here, we miniaturized the classical NiFe-layered double hydroxides (NiFe-LDHs) and integrated them into S/N co-doped hollow hierarchical porous carbon (SNHPC) loaded with rare earth La single atoms (La SAs) to obtain nanoreactors. The unique carbon framework induced uniform deposition of LDH nanodots and ensured adequate exposure during electrocatalysis. The advantages of the carbon carrier for the local electric field and interfacial OH- layer density in the catalytic process were confirmed by finite element simulations. The well-designed NiFe-LDH@La SNHPC exhibited satisfactory activity (overpotential of 251 mV at 10 mA cm-2) and stability in alkaline media, exceeding those of commercial RuO2. Impressively, a cathode catalyst combining NiFe-LDH@La SNHPC with Pt/C can be stabilized in rechargeable zinc-air batteries (ZABs) for more than 350 h. Theoretical calculations indicated that the introduction of La SAs modified the electronic structures of the NiFe-LDH nanodots, activated lattice oxygen activity, optimized the adsorption strength of the intermediates, and reduced rate-determining step energy barriers in OER. This study provides guidance for the preparation and design of sub-microreactors and information on the strong electron interaction effects induced by rare earth species.

A Deep Dive Into the Study of Nitrogen-Doped Carbons as Electrocatalysts for the Oxygen Reduction Reaction via Design of Experiments

A design of experiments (DoE) approach is applied to the study of nitrogen (N)-doped carbons prepared via a molten salt templating method using the eutectic salt lithium chloride/potassium chloride (LiCl/KCl) and the precursors sucrose and melamine (N precursor). This approach is used to deconvolute effects from surface composition and porosity on the electrocatalytic performance of N-doped carbons as oxygen reduction reaction (ORR) electrocatalysts. Additionally, DoE is implemented to reveal the synthesis-structure-function relationship for the prepared materials over an entire design space. From this work, it is evident that the N precursor content has the greatest impact on the tunability of material properties (e.g., N-content, pyridinic N content, surface area, pore size distribution, etc.) followed by pyrolysis temperature and salt mass. Additionally, without adequate porosity (surface area ≥ 500 m2 g-1, micropore volume > 0.15 cc g-1, etc.) and electrochemically active surface area, activity and selectivity for the ORR via N-functionalization is significantly reduced. Optimization of the studied design space indicates that an N precursor content of 35 wt.%-38 wt.%, pyrolysis temperature ≤ 900 °C, and a salt mass < 15 g would garner the necessary N-content (∼7-8 at%) and porosity to achieve the most active and selective N-doped carbon ORR electrocatalysts.

Uncovering the Nonmonotonic Relationship between Total Activity and Single-Atom Density for Oxygen Reduction Catalysis

In common sense, the total activity of single-atom catalysts (SACs) increases monotonically with the densification of single-atom sites, encouraging a general effort in developing high-density SACs for a variety of reactions, such as the oxygen reduction reaction (ORR). However, the intrinsic activity of each single-atom site may not remain constant with increasing density, since their growing interactions at the subnanometer scale can no longer be ignored. Here we report the nonmonotonic relationship between ORR activity and single-atom density, as revealed by theoretical calculations and experimental validation. Taking cobalt-embedded carbon as the model SAC for ORR, when the distance between neighboring Co sites is reduced below about 0.5 nm, proximity effects including hydrogen bonding and steric hindrance between adjacent intermediates dominate the ORR energetics, leading to a unexpected drop in the intrinsic activity. Our experiments unambiguously verified that both the total and mass activities of Co-SACs show turning points with increasing single-atom density. This counterintuitive nonmonotonic relationship between total activity and single-atom density may guide the rational design of high-performance SACs with optimal site densities.

MOF Derived Phosphide Nanocubes with Internal Heterojunction: A Study Powered by Single Entity Electrochemistry

Metal-organic frameworks (MOFs) and their derivatives have captivated immense interest due to their tunable chemical composition and structures. Our research introduces an elegant strategy for advancing hybrid MOF-based electrocatalysts, employing scanning electrochemical cell microscopy (SECCM) for single-entity electrochemistry probing of individual particles with precisely engineered compositions and structures. We achieved controlled phosphidation of Prussian blue analogues, forming hollow nanocubes with Fe-doped CoP/Co2P heterojunctions, which demonstrated significantly enhanced hydrogen evolution reaction (HER) activity, emphasizing the pivotal role of structural and compositional tuning in transition metal phosphide catalysts. Utilizing SECCM, we probed the intrinsic HER activity of individual nanocubes, correlating their electrochemical behavior with their size and composition. Computational insights revealed that the heterojunctions enhanced the electronic conductivity and spin density, established internal electric fields, and minimized the Gibbs free energy barrier. This study paves the way toward advanced nanostructured electrocatalysts, underscoring the crucial interplay between size, structure, composition, and catalytic efficacy.

Recent advances in the reactions of isatin-derived MBH carbonates for the synthesis of spirooxindoles

As one of the main fragments in medical drugs, spirooxindole has received considerable attention from organic and medicinal chemists. In the past few decades, chemists have been searching for more straightforward and efficient methods to produce compounds containing a spirooxindole fragment. In this regard, isatin-derived Morita-Baylis-Hillman (MBH) carbonates have been widely used as versatile building blocks for the synthesis of spirooxindole structures. This review summarizes the reactions reported in recent years for the construction of the spirooxindole skeleton or C3 disubstituted oxindole derivatives using isatin-derived MBH carbonates and demonstrates the role of isatin-derived MBH carbonates in these reactions.

Chlorine Axial Coordination Activated Lanthanum Single Atoms for Efficient Oxygen Electroreduction with Maximum Utilization

Currently, there are still obstacles to rationally designing the ligand fields to activate rare-earth (RE) elements with satisfactory intrinsic electrocatalytic reactivity. Herein, axial coordination strategies and nanostructure design are applied for the construction of La single atoms (La-Cl SAs/NHPC) with satisfactory oxygen reduction reaction (ORR) activity. The nontrivial LaN4Cl2 motifs configuration and the hierarchical porous carbon substrate that facilitates maximized metal atom utilization ensure high half-wave potential (0.91 V) and significant robustness in alkaline media. The aqueous and flexible Zinc-air battery (ZAB) integrating La-Cl SAs/NHPC as the cathode catalyst exhibits a maximum power density of 260.7 and 68.5 mW cm-2, representing one of the most impressive RE-based ORR electrocatalysts to date. Theoretical calculations have demonstrated that the Cl coordination evidently modulate the electronic structures of La sites, which promoted electron transfer efficiency by d-p orbital couplings. With enhanced electroactivity of La sites, the adsorptions of key intermediates are optimized to alleviate the energy barriers of the potential-determining step. Importantly, this preparation strategy is also successfully applied to other REs. This work provides perspectives for near-range electronic structure modulation of RE-SAs based on a nonplanar coordination micro-environment for efficient electrocatalysis.

Mo Doping Induced Ni Surface Enrichment of Porous Spherical Core-Shell Bifunctional Electrocatalyst for Overall Water Splitting

Rational design of efficient and non-noble metal bifunctional catalysts for alkaline overall water splitting (OWS) electrochemical reactions is of top priority in the development of hydrogen-based energy. Constructing catalysts with unique structures to optimize the intrinsic activity is a promising strategy. In this work, a newly developed Ni3Co3Mo100-BTC-15h catalyst consisting of Ni nanoparticles enriched on the surface along with a core-shell porous structure is prepared via a hydrothermal process. Due to the unique composition and Ni-enriched core-shell structure, the Ni3Co3Mo100-BTC-15h catalyst exhibits enhanced electrocatalytic properties for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline media. Under the dual tuning and intermetallic phase, the Ni3Co3Mo100-BTC-15h catalyst deliver a lower overpotential of 151 mV and ≈ 136 mV exceeding commercial catalysts for OER and HER. When the Ni3Co3Mo100-BTC-15h is used as bifunctional catalyst for OWS in a two-electrode alkaline electrolyzer, a cell voltage of 1.62 V is required to drive 10 mA·cm-2 comparable to that of commercial Pt/C and RuO2 catalysts. This work proposes a potential strategy for optimizing the electrocatalytic performance of non-noble metal catalysts for OWS.

Modulation in Spin State of Co3O4 Decorated Fe Single Atom Enables a Superior Rechargeable Zinc-Air Battery Performance

High-performance bifunctional electrocatalyst for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is the keystone for the industrialization of rechargeable zinc-air battery (ZAB). In this work, the modulation in the spin state of Fe single atom on nitrogen doped carbon (Fe1-NC) is devised by Co3O4 (Co3O4@Fe1-NC), and a mediate spin state is recorded. Besides, the d band center of Fe is downshifted associated with the increment in eg filling revealing the weakened interaction with OH* moiety, resulting in a boosted ORR performance. The ORR kinetic current density of Co3O4@Fe1-NC is 2.0- and 5.6 times higher than Fe1-NC and commercial Pt/C, respectively. Moreover, high spin state is found for Co in Co3O4@Fe1-NC contributing to the accelerated surface reconstruction of Co3O4 witnessed by operando Raman and electrochemical impedance spectroscopies. A robust OER activity with overpotential of 352 mV at 50 mA cm-2 is achieved, decreased by 18 and 60 mV by comparison with Co3O4@NC and IrO2. The operando Raman reveals a balanced adsorption of OH* species and its deprotonation leading to robust stability. The ZAB performance of Co3O4@Fe1-NC is 193.2 mW cm-2 and maintains for 200 h. Furthermore, the all-solid-state ZAB shows a promising battery performance of 163.1 mW cm-2.

Conventional versus Unconventional Oxygen Reduction Reaction Intermediates on Single Atom Catalysts

The oxygen reduction reaction (ORR) stands as a pivotal process in electrochemistry, finding applications in various energy conversion technologies such as fuel cells, metal-air batteries, and chlor-alkali electrolyzers. Hereby, a comprehensive density functional theory (DFT) investigation is presented into the proposed conventional and unconventional ORR mechanisms using single-atom catalysts (SACs) supported on nitrogen-doped graphene (NG) as model systems. Several reaction intermediates have been identified that appear to be more stable than the ones postulated in the conventional mechanism, which follows the *OOH, *O, and *OH intermediates. This finding particularly holds for adsorbed *O2, which can have different adsorption geometries, ranging from η1Ο2 or η2Ο2 superoxo complexes as well as sin and anti complexes, with the two O-related ligands binding on the same or opposite sides, respectively. In the case of M@NG (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, and Pt), the ORR follows these unconventional *O2 intermediates, whereas for Cr@NG and Cu@NG classical and unconventional *O2 intermediates compete. We approximate the electrocatalytic activity using the concept of the thermodynamic overpotential and demonstrate that the conventional mechanism gives rise to a smaller overpotential compared to mechanisms following unconventional intermediates during the four proton-coupled electron transfer steps. Our trend study indicates that transition metals with fewer d electrons reveal smaller electrocatalytic activity due to a larger thermodynamic overpotential. Among the investigated SAC systems, Co emerges as a promising candidate, with thermodynamic overpotential and limiting potential values of 0.38 and 0.85 V vs the standard hydrogen electrode, respectively, with the conventional mechanism being favored, and with Cu appearing as the second-best candidate.

Hydrogel Electrolyte-Mediated In Situ Zn-Anode Modification and the Ru-RuO2/NGr-Coated Cathode for High-Performance Solid-State Rechargeable Zn-Air Batteries

This work aims to deal with the challenges associated with designing complementary bifunctional electrocatalysts and a separator/membrane that enables rechargeable zinc-air batteries (RZABs) with nearly solid-state operability. This solid-state RZAB was accomplished by integrating a bifunctional electrocatalyst based on Ru-RuO2 interface nanoparticles supported on nitrogen-doped (N-doped) graphene (Ru-RuO2/NGr) and a dual-doped poly(acrylic acid) hydrogel (d-PAA) electrolyte soaked in KOH with sodium stannate additive. The catalyst shows enhanced activity and stability toward the two oxygen reactions, i.e., oxygen reduction and evolution reactions (ORR and OER), with a very low potential difference (ΔE) of 0.64 V. The computational insights bring out the electronic factors contributing to the enhanced catalytic activity of Ru-RuO2/NGr based on the charge density difference (CDD) between the interfaces. The disadvantages of the existing solid-state RZABs, such as their limited lifespan brought on by passivation, dendritic growth, corrosion, and shape change, have also been taken into account. The introduction of the stannate additive to the electrolyte induced an in situ Zn-anode modification, which subsequently improved the interfacial stability of the ZABs and, hence, the battery life cycles. The experimental observations reveal that, during the charging process, the Sn nanoparticles enable the homogeneous Zn deposition on the surface of the anode. Thus, the in situ Zn-anode surface modification assisted in achieving a high-rate cycle capability, viz., the homemade catalyst-based system exhibited continuous charge-discharge cycles for 20 h at a current density of 2.0 mA cm-2, with each cycle lasting for 5 min.

Meso/Microporous Single-Atom Catalysts Featuring Curved Fe-N4 Sites Boost the Oxygen Reduction Reaction Activity

Zeolitic-imidazolate frameworks (ZIFs) are among the most efficient precursors for the synthesis of atomically dispersed Fe-N/C materials, which are promising catalysts for enhancing the performance of Zn-air batteries (ZABs) and proton exchange fuel cells (PEMFCs). However, existing ZIF-derived Fe-N/C electrocatalysts mostly consist of microporous materials, leading to insufficient mass transport and inadequate battery/cell performance. In this study, we synthesize an atomically dispersed meso/microporous Fe-N/C material with curved Fe-N4 active sites, denoted as FeSA-N/TC, through the pyrolysis of hemin-modified ZIF films on ZnO nanorods, obtained from the self-assembly reaction between Zn2+ from ZnO hydrolysis and 2-methylimidazole. Density functional theory calculations demonstrate that the curved Fe-N4 active sites can weaken the intermediate adsorptions, resulting in lower free energy barriers and enhanced performance during oxygen reduction reaction (ORR). Specifically, FeSA-N/TC exhibits exceptional ORR performance with half-wave potentials of 0.925 V in alkaline media and 0.825 V in acidic media. When used as the cathodic catalyst in PEMFCs and ZABs, FeSA-N/TC achieves high peak power densities (H2-O2 PEMFC: 1100 mW cm-2; H2-Air PEMFC: 715 mW cm-2; liquid-state ZAB: 228 mW cm-2; solid-state ZAB: 112 mW cm-2), demonstrating its feasibility and efficiency in practical applications.

Decoding Dual-Functionality in N-doped Defective Carbon: Unveiling Active Sites for Bifunctional Oxygen Electrocatalysis

Oxygen electrocatalysis plays a pivotal role in energy conversion and storage technologies. The precise identification of active sites for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for developing an efficient bifunctional electrocatalyst. However, this remains a challenging endeavor. Here, it is demonstrated that metal-free N-doped defective carbon material derived from triazene derivative exhibits excellent bifunctional activity, achieving a notable ΔE value of 0.72 V. Through comprehensive X-ray photoelectron spectroscopy and Raman spectroscopic analyses, the active sites responsible for oxygen electrocatalysis are elucidated, resolving a long-standing issue. Specifically, pyridinic-N sites are crucial for ORR, while graphitic-N are good for OER. A predictive model utilizing π-electron descriptors further aids in identifying these sites, with theoretical insights aligning with experimental results. Additionally, in situ ATR-FTIR spectroscopy provides clarity on reaction intermediates for both reactions. This research paves the way for developing metal-free, site-specific electrocatalysts for practical applications in energy technologies.

Prussian Blue-Derived Atomic Fe/Fe3C@N-Doped C Catalysts Supported by Carbon Cloth as Integrated Air Cathode for Flexible Zn-Air Batteries

The development of an integrated air cathode with superior oxygen reduction reaction (ORR) performance is fundamental to flexible zinc-air batteries (ZABs) for wearable electronics. Herein, a self-assembled metal-organic framework (MOF)-derived strategy is proposed to prepare a atomic Fe/Fe3C@N-doped C catalysts supported by carbon cloth (CC) catalyst for use as an air cathode of flexible ZABs. The Prussian Blue precursor, which self-assembles on the surface of the carbon cloth due to electrostatic attraction, is critical in achieving the uniform dispersion of catalysts with high density loading on carbon cloth substrates. The hollow cubic structure, N-doped carbon layer coating, and the integrated electrode design can provide more accessible active sites and facilitate a rapid electron transfer and mass transport. Density functional theory (DFT) calculation reveals that the electronic interactions between the Fe-N4 and Fe3C dual active sites can optimize the adsorption-desorption behavior of oxygen intermediates formed during the ORR. Consequently, the Fe/Fe3C@N-doped C/CC exhibits an excellent half wave potential (E1/2 = 0.903 V) and superior long-term cycling stability in alkaline environments. With excellent ORR performance, ZABs and flexible ZABs based on Fe/Fe3C@N-doped C/CC air cathode demonstrate excellent overall electrochemical performance in terms of open circuit voltage, maximum power density, flexibility, and cycling stability.

N, F Co-Doped Carbon Derived from Spent Bleaching Earth Waste as Oxygen Electrocatalyst Support

Affordable nitrogen and fluorine co-doped carbon nanostructure was prepared from the hazardous industrial waste of edible oil refinery, spent bleaching earth (SBE), and used as raw material for obtaining high-performance non-noble metal bifunctional oxygen electrocatalysts. Waste SBE contains 35 % residue non-saturated oil as a carbon source and the assistance of montmorillonite (MMT) as the template. This study converts waste SBE into a fluorine-doped carbon nanostructure through a pyrolysis process followed by removing the aluminosilicate layers of the MMT by HF etching. Furthermore, the impregnation of the support with Co and Fe nitrates readily gives rise to N, F co-doped carbon (NFC) electrocatalysts, as confirmed by XPS analysis. Electrochemical results evidenced that the Co-NFC catalyst proved to be a valuable bifunctional competitor for oxygen reduction reaction and oxygen evolution reaction in alkaline media, showing activity in both reactions and superior stability compared with the Fe-NFC catalyst in accelerated tests. This work offers a straightforward, economical, and eco-friendly strategy for designing N, F co-doped carbon-based electrocatalysts for oxygen reactions in electrochemical devices.

Impact of Metal Source Structure on the Electrocatalytic Properties of Polyacrylonitrile-Derived Co-N-Doped Oxygen Reduction Reaction Catalysts

The oxygen reduction reaction (ORR) plays a central role in energy conversion and storage technologies. A promising alternative to precious metal catalysts are non-precious metal doped carbons. Considerable efforts have been devoted to cobalt-doped carbonized polyacrylonitrile catalysts, but the optimization of their catalytic performance remains a key challenge. We have proposed a multifunctional active metal source strategy based on the cobalt complex with the ligand containing pyridine and azo-fragments. This complex simultaneously provides the nitrogenous environment for the Co atoms and acts as a blowing agent due to N2 extrusion, thus increasing the surface area and porosity of the material. This strategy provided the catalysts with a high surface area and pore volume, combined with the greater fraction of Co-N clusters, and a lesser amount and smaller size of Co metal particles compared to conventionally prepared catalysts, resulting in improved catalytic performance. In addition to strict 4-electron ORR kinetics and 383 mV overpotential, the novel catalysts exhibit limiting current values close to the Pt/C benchmark and greatly overcome the Pt in methanol tolerance. These results demonstrate the critical role of metal source structure and carbonization parameters in tailoring the structural and electrochemical properties of the catalysts.

Theoretical Investigation of Single-, Double-, and Triple- p-block Metals Anchored on g-CN Monolayer for Oxygen Electrocatalysis

The design and development of highly active non-noble metal electrocatalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are crucial for metal-air batteries. In this work, the electrocatalytic performance of different p-block metal (PM = Sn, Sb, Pb and Bi) atoms embedded in the g-CN monolayer (PMx@g-CN, x = 1-3) for the OER and ORR was systematically investigated by density functional theory (DFT). The strong interaction between PMx atoms and g-CN substrates indicates the good stability of PMx@g-CN catalysts. Among all the designed catalysts, Bi3@g-CN is found to be a promising bifunctional electrocatalyst for both the OER and ORR with the calculated overpotential ηOER and ηORR of 0.23 and 0.25 V, respectively. With the atomic active sites of PMx increasing from x = 1 to 3, the OER and ORR catalytic activity is enhanced. The correlations between the overpotentials of the OER/ORR and Bader charge values of the anchored PMx atoms of the catalysts were established. Our findings contribute to searching for noble metal-free bifunctional electrocatalysts and shed light on the rational design of atomic active sites on electrocatalysts.

Interface Engineering Induced by Low Ru Doping in Ni/Co@NC Derived from Ni-ZIF-67 for Enhanced Electrocatalytic Overall Water Splitting

Electrochemical water splitting is a promising approach for hydrogen evolution reactions (HER); however, the oxygen evolution reaction (OER) remains a major bottleneck due to its high energy requirements. High-performance electrocatalysts capable of facilitating HER, OER, and overall water splitting (OWS) are highly needed to improve OER kinetics. In this work, we synthesized a trimetallic heterostructure of Ru, Ni, and Co incorporated into N-doped carbon (denoted as Ru/Ni/Co@NC) by first synthesizing Ni/Co@NC from Ni-ZIF-67 polyhedrons via high-temperature carbonization, followed by Ru doping using the galvanic replacement method. Benefiting from increased active surface sites, modulated electronic structure, and enhanced interfacial synergistic effects, Ru/Ni/Co@NC exhibited exceptional electrocatalytic performance for both HER and OER processes. The optimized Ru/Ni/Co@NC catalyst, with a minimal Ru mass ratio of ∼2.07%, demonstrated significantly low overpotential values of 34 mV for HER and 174 mV for OER at a current density of 10 mA/cm2 with corresponding Tafel slope values of 33.42 and 34.39 mV/dec, respectively. Further, the optimized catalyst was loaded onto carbon paper and used as anode and cathode materials for alkaline water splitting. Interestingly, a low cell voltage of just 1.44 V was obtained. The enhanced electrolytic performance was further elaborated by density functional theory (DFT) calculations, which confirmed that Ru doping in Ni/Co introduced additional active sites for H*, enhancing adsorption/desorption abilities for HER (ΔGH* = -0.30 eV), lowering water dissociation barrier (ΔGb = 0.49 eV) and reducing the energy barrier for the rate-determining step of OER (O* → OOH*) to 1.62 eV in an alkaline environment. These findings reflect the significant potential of ZIF-67-based catalysts in energy conversion and storage applications.

Heterointerfacial engineering of N,P-doped carbon nanosheets supported Co/Co2P nanoparticles for boosting oxygen reduction and oxygen evolution reactions towards rechargeable Zn-air battery

Transition metal phosphides (TMPs) with high electrocatalytic activity for the oxygen evolution reaction (OER) are reckoned as a substitution of precious group metals catalysts in rechargeable Zn-air battery. In this work, Co/Co2P heterojunction nanoparticles supported N,P-doped carbon nanosheets (Co/Co2P@NPCNS) were designed and prepared via a facile one-step molten salt-assisted pyrolysis process. Density function theory calculations reveal that the heterogeneous interactions of Co/Co2P effectively enhance the bifunctional electrocatalytic activity for oxygen reduction reaction (ORR) and OER. The synergistic interaction between the Co/Co2P heterojunction nanoparticles with highly exposed active sites and excellent catalytic activity and the two-dimensional doped carbon nanosheets with high conductivity contributes to Co/Co2P@NPCNS exhibiting preeminent bifunctional ORR/OER activity and stability with a high half-wave potential for ORR (0.87 V), a low overpotential for OER (302 mV at 10 mA cm-2) and a low potential gap (0.66 V). The homemade rechargeable Zn-air battery performs high peak power density (187 mW cm-2) and exceptional endurance. This heterogeneous interface tactic of integrating TMPs with heteroatom-doped carbon materials may shed light on the research and development of non-precious metal electrocatalysts.

Flexible Hydrazone-Linked Metal-Covalent Organic Frameworks with Copper Clusters for Efficient Electrocatalytic Oxygen Evolution Reaction

Despite the challenges associated with the synthesis of flexible metal-covalent organic frameworks (MCOFs), these offer the unique advantage of maximizing the atomic utilization efficiency. However, the construction of flexible MCOFs with flexible building units or linkages has rarely been reported. In this study, novel flexible MCOFs are constructed using flexible building blocks and copper clusters with hydrazone linkages. The heterometallic frameworks (Cu, Co) are prepared through the hydrazone linkage coordination method and evaluated as catalysts for the oxygen evolution reaction (OER). Owing to the spatial separation and functional cooperation of the heterometallic MCOF catalysts, the as-synthesized MCOFs exhibited outstanding catalytic activities with an overpotential of 268.8 mV at 10 mA cm-2 for the OER in 1 M KOH, which is superior to those of the reported covalent organic frameworks (COFs)-based OER catalysts. Theoretical calculations further elucidated the synergistic effect of heterometallic active sites within the linkages and frameworks, contributing to the enhanced OER activity. This study thus introduces a novel approach to the fundamental design of flexible MCOF catalysts for the OER, emphasizing their enhanced atomic utilization efficiency.

N-P covalent bond regulation of mesoporous carbon-based catalyst for lowered oxygen reduction overpotential and enhanced zinc-air battery performance

Developing sustainable metal-free carbon-based electrocatalysts is essential for the deployment of metal-air batteries such as zinc-air batteries (ZABs), among which doping of heteroatoms has attracted tremendous interest over the past decade. However, the effect of the heteroatom covalent bonds in carbon matrix on catalysis was neglected in most studies. Here, an efficient metal-free oxygen reduction reaction (ORR) catalyst is demonstrated by the N-P bonds anchored carbon (termed N,P-C-1000). The N,P-C-1000 catalyst exhibits superior specific surface area of 1362 m2 g-1 and ORR activity with a half-wave potential of 0.83 V, close to that of 20 wt% Pt/C. Theoretical computations reveal that the p-band center for C-2p orbit in N,P-C-1000 has higher interaction strength with the intermediates, thus reducing the overall reaction energy barrier. The N,P-C-1000 assembled primary ZAB can attain a large peak power density of 121.9 mW cm-2 and a steady discharge platform of ∼1.20 V throughout 120 h. Besides, when served as the cathodic catalyst in a solid-state ZAB, the battery shows flexibility, conspicuous open circuit potential (1.423 V), and high peak power density (85.8 mW cm-2). Our findings offer a strategy to tune the intrinsic structure of carbon-based catalysts for improved electrocatalytic performance and shed light on future catalysts design for energy storage technologies beyond batteries.

Construction of a Three-Phase MnS2/Co4S3/Ni3S2 Heterostructure for Boosting Oxygen Evolution

The rational construction of highly efficient electrocatalysts for the oxygen evolution reaction (OER) plays a critical role in energy conversion systems. Designing heterostructures is a common and effective strategy to improve the performance of electrocatalysts. In this paper, an MnS2/Co4S3/Ni3S2 heterostructure was synthesized on Ni foam using a one-step vulcanization method. It provides a modified electronic structure and plentiful three-phase heterogeneous interfaces that can effectively enrich the active sites and accelerate electron transfer, thereby improving the OER activity. Thanks to the heterostructure, the MnS2/Co4S3/Ni3S2 exhibits a low overpotential of 265 and 304 mV for the OER to reach current densities of 50 and 100 mA/cm2, respectively. Furthermore, the surface reconstruction of MnS2/Co4S3/Ni3S2 has been investigated, which revealed the formation of metal hydr(oxy)oxides evolved during the OER process. This work provides a facile strategy for constructing three-phase heterostructures, shedding light on the development of high-performance, nonprecious metal-based OER electrocatalysts.

Construction of an Axial Charge Transfer Channel Between Single-Atom Fe Sites and Nitrogen-Doped Carbon Supports for Boosting Oxygen Reduction

The introduction of axial-coordinated heteroatoms in Fe─N─C single-atom catalysts enables the significant enhancement of their oxygen reduction reaction (ORR) performance. However, the interaction relationship between the axial-coordinated heteroatoms and their carbon supports is still unclear. In this work, a gas phase surface treatment method is proposed to prepare a series of X─Fe─N─C (X = O, P, and S) single-atom catalysts with axial X-coordination on graphitic-N-rich carbon supports. Synchrotron-based X-ray absorption near-edge structure spectra and X-ray photoelectron spectroscopy indicate the formation of an axial charge transfer channel between the graphitic-N-rich carbon supports and single-atom Fe sites by axial O atoms in O─Fe─N─C. As a result, the O─Fe─N─C exhibits excellent ORR performance with a half-wave potential of 0.905 V versus RHE and a high specific capacity of 884 mAh g-1 for zinc-air battery, which is superior to other X─Fe─N─C catalysts without axial charge transfer and the commercial Pt/C catalyst. This work not only demonstrates a general synthesis strategy for the preparation of single-atom catalysts with axial-coordinated heteroatoms, but also presents insights into the interaction between single-atom active sites and doped carbon supports.

Leaf-like Multiphase Metal Phosphides as Bifunctional Oxygen Electrocatalysts toward Rechargeable Zinc-Air Batteries

Developing a bifunctional oxygen electrocatalyst is crucial to improve the reversibility and cycle life of a rechargeable zinc-air battery (RZAB). Here, transition metal phosphides (TMPs) with a leaf-like hierarchical structure and multiphase composition can be synthesized by the "alloying-dealloying-phosphating" strategy. The as-prepared P-NiCo(1:1) electrode takes advantage of its internal dense nanoholes and synergistic effects induced by NiCoP-containing polyphase to reveal multifunctional catalysis, such as OER and ORR. In combination of these advantages, P-NiCo(1:1) exhibits an extremely low OER overpotential of 220 mV at 10 mA cm-2, a higher half-wave potential of 0.79 V for ORR, and a smaller potential difference (ΔE) of 0.66 V. The liquid RZAB with P-NiCo(1:1) as a cathodic bifunctional catalyst delivers a higher open-circuit voltage (OCV), a larger power density of 175 mW cm-2, and longer cycling life for more than 180 h. Even when applied in solid-state flexible RZABs, the lightweight module could start high-power devices. With theoretical confirmation, the major phase NiCoP of P-NiCo(1:1) is helpful to increase the density of states, regulate the d-band center, and decrease the energy barrier to 2.13 eV, which are significantly superior to those of Co2P and Ni2P. It is believable that the synthetic strategy and activity-promoting mechanism acquired from this research can offer a guide to designing a promising rechargeable zinc-air battery system.

Resorcinol-formaldehyde semiconducting resins as precursors for carbon spheres toward electrocatalytic oxygen reduction

The carbon spheres synthesized by pyrolysis of resorcinol-formaldehyde (RF) semiconducting resins exhibit enhanced activity for electrocatalytic oxygen reduction. The spheres consist of narrow reticulated carbon layers, which are derived from the donor-acceptor π-stacking interaction of the resins, and show high electron conductivity.

A cobalt porphyrin-bridged covalent triazine polymer-derived electrode for efficient hydrogen production

Pronounced compositional regulation and microstructure evolution have a significant influence on hydrogen electrocatalysis. Herein, for the first time, we demonstrate that N,Co-codoped carbon supported Co5.47N nanoparticles (Co5.47N/N,Co-C-800) derived from a nitrogen-rich porphyrin-bridged covalent triazine polymer (CoTAPPCC) are an effective electrocatalyst for the HER in 1.0 M KOH when compared to CoCo2O4/N,Co-C-900 (pyrolysis at 900 °C) and CoO/N,Co-C-1000 (pyrolysis at 1000 °C). The structural and morphological variations of CoTAPPCC at different heat treatment temperatures were investigated through various spectroscopic techniques. We reveal that electrocatalytic HER activity is temperature- and component-dependent. The overpotentials for Co5.47N/N,Co-C-800 to reach current densities of 10 and 100 mA cm-2 were determined to be 76 and 229 mV, respectively, outperforming many other state-of-the-art HER electrocatalysts. This work also sheds light on the influence of calcination temperature on the electrocatalytic HER of final samples.

Highly Curved Defect Sites: How Curvature Effect Influences Metal-Free Defective Carbon Electrocatalysts

Topological defects are widely recognized as effective active sites toward a variety of electrochemical reactions. However, the role of defect curvature is still not fully understood. Herein, carbon nanomaterials with rich topological defect sites of tunable curvature is reported. The curved defective surface is realized by controlling the high-temperature pyrolytic shrinkage process of precursors. Theoretical calculations demonstrate bending the defect sites can change the local electronic structure, promote the charge transfer to key intermediates, and lower the energy barrier for oxygen reduction reaction (ORR). Experimental results convince structural superiority of highly-curved defective sites, with a high kinetic current density of 22.5 mA cm-2 at 0.8 V versus RHE for high-curvature defective carbon (HCDC), ≈18 times that of low-curvature defective carbon (LCDC). Further raising the defect densities in HCDC leads to the dual-regulated products (HCHDC), which exhibit exceptionally outstanding ORR activity in both alkaline and acidic media (half-wave potentials: 0.88 and 0.74 V), outperforming most of the reported metal-free carbon catalysts. This work uncovers the curvature-activity relationship in carbon defect for ORR and provides new guidance to design advanced catalysts via curvature-engineering.

Promoting Electrocatalytic Oxygen Reactions Using Advanced Heterostructures for Rechargeable Zinc-Air Battery Applications

In order to facilitate electrochemical oxygen reactions in electrically rechargeable zinc-air batteries (ZABs), there is a need to develop innovative approaches for efficient oxygen electrocatalysts. Due to their reliability, high energy density, material abundance, and ecofriendliness, rechargeable ZABs hold promise as next-generation energy storage and conversion devices. However, the large-scale application of ZABs is currently hindered by the slow kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). However, the development of heterostructure-based electrocatalysts has the potential to surpass the limitations imposed by the intrinsic properties of a single material. This Account begins with an explanation of the configurations of ZABs and the fundamentals of the oxygen electrochemistry of the air electrode. Then, we summarize recent progress with respect to the variety of heterostructures that exploit bifunctional electrocatalytic reactions and overview their impact on ZAB performance. The range of heterointerfacial engineering strategies for improving the ORR/OER and ZAB performance includes tailoring the surface chemistry, dimensionality of catalysts, interfacial charge transfer, mass and charge transport, and morphology. We highlight the multicomponent design approaches that take these features into account to create advanced highly active bifunctional catalysts. Finally, we discuss the challenges and future perspectives on this important topic that aim to enhance the bifunctional activity and performance of zinc-air batteries.

Structural Reconstruction of a Cobalt- and Ferrocene-Based Metal-Organic Framework during the Electrochemical Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) are increasingly being investigated as electrocatalysts for the oxygen evolution reaction (OER) due to their unique modular structures that present a hybrid between molecular and heterogeneous catalysts, featuring well-defined active sites. However, many fundamental questions remain open regarding the electrochemical stability of MOFs, structural reconstruction of coordination sites, and the role of in situ-formed species. Here, we report the structural transformation of a surface-grown MOF containing cobalt nodes and 1,1'-ferrocenedicarboxylic acid linkers (denoted as CoFc-MOF) during the OER in alkaline electrolyte. Ex situ and in situ investigations of CoFc-MOF film suggest that the MOF acts as a precatalyst and undergoes a two-step restructuring process under operating conditions to generate a metal oxyhydroxide phase. The MOF-derived metal oxyhydroxide catalyst, supported on nickel foam electrodes, displays high activity toward the OER with an overpotential of 190 mV at a current density of 10 mA cm-2. While this study demonstrates the necessity of investigating structural evolution of MOFs during electrocatalysis, it also shows the potential of using MOFs as precursors in catalyst design.

p-d Orbital Hybridization Induced by Asymmetrical FeSn Dual Atom Sites Promotes the Oxygen Reduction Reaction

With more flexible active sites and intermetal interaction, dual-atom catalysts (DACs) have emerged as a new frontier in various electrocatalytic reactions. Constructing a typical p-d orbital hybridization between p-block and d-block metal atoms may bring new avenues for manipulating the electronic properties and thus boosting the electrocatalytic activities. Herein, we report a distinctive heteronuclear dual-metal atom catalyst with asymmetrical FeSn dual atom sites embedded on a two-dimensional C2N nanosheet (FeSn-C2N), which displays excellent oxygen reduction reaction (ORR) performance with a half-wave potential of 0.914 V in an alkaline electrolyte. Theoretical calculations further unveil the powerful p-d orbital hybridization between p-block stannum and d-block ferrum in FeSn dual atom sites, which triggers electron delocalization and lowers the energy barrier of *OH protonation, consequently enhancing the ORR activity. In addition, the FeSn-C2N-based Zn-air battery provides a high maximum power density (265.5 mW cm-2) and a high specific capacity (754.6 mA h g-1). Consequently, this work validates the immense potential of p-d orbital hybridization along dual-metal atom catalysts and provides new perception into the logical design of heteronuclear DACs.

A Porphyrin-Faced Zn8L6 Cage for Selective Oxidation of C(sp3)-H Bonds and Sulfides

Catalytic oxidation of benzyl C-H bonds and sulfides from fuel oils stands as an attractive proposition in the quest for clean energy, yet their simultaneous oxidation with a singular, economically friendly catalyst is not well established. In this work, the combination of a cobalt(II) porphyrin ligand with 2-pyridinecarboxaldehyde and ZnII yielded a Zn8L6 cage (Co cube). The three-dimensional conjugated structure effectively enhances energy transfer efficiency, enabling the Co cube to show a good ability to activate oxygen under light conditions for photooxidation. Moreover, this catalytic system demonstrates high selectivity for the photocatalytic oxidation of C(sp3)-H bonds and sulfides, employing the Co cube as a single component catalyst, molecular oxygen as the oxidant, and activating oxygen into 1O2 under mild reaction conditions. This provides significant insights for organic synthesis and future design of photocatalysts with complex molecular components.

P-Bridging Asymmetry Diatomic Catalysts Sites Drive Efficient Bifunctional Oxygen Electrocatalysis for Zinc-Air Batteries

Rechargeable zinc-air batteries (ZABs) rely on the development of high-performance bifunctional oxygen electrocatalysts to facilitate efficient oxygen reduction/evolution reactions (ORR/OER). Single-atom catalysts (SACs), characterized by their precisely defined active sites, have great potential for applications in ZABs. However, the design and architecture of atomic site electrocatalysts with both high activity and durability present significant challenges, owing to their spatial confinement and electronic states. In this study, a strategy is proposed to fabricate structurally uniform dual single-atom electrocatalyst (denoted as P-FeCo/NC) consisting of P-bridging Fe and Co bimetal atom (i.e., Fe-P-Co) decorated on N, P-co-doped carbon framework as an efficient and durable bifunctional electrocatalyst for ZABs. Experimental investigations and theoretical calculations reveal that the Fe-P-Co bridge-coupling structure enables a facile adsorption/desorption of oxygen intermediates and low activation barrier. The resultant P-FeCo/NC exhibits ultralow overpotential of 340 mV at 10 mA cm-2 for OER and high half-wave potential of 0.95 V for ORR. In addition, the application of P-FeCo/NC in rechargeable ZABs demonstrates enhanced performance with maximum power density of 115 mW cm-2 and long cyclic stability, which surpass Pt/C and RuO2 catalysts. This study provides valuable insights into the design and mechanism of atomically dispersed catalysts for energy conversion applications.

A Coordination-Derived Cerium-Based Amorphous-Crystalline Heterostructure with High Electrocatalytic Oxygen Evolution Activity

The rational design of heterogeneous catalysts is crucial for achieving optimal physicochemical properties and high electrochemical activity. However, the development of new amorphous-crystalline heterostructures is significantly more challenging than that of the existing crystalline-crystalline heterostructures. To overcome these issues, a coordination-assisted strategy that can help fabricate an amorphous NiO/crystalline NiCeOx (a-NiO/c-NiCeOx) heterostructure is reported herein. The coordination geometry of the organic ligands plays a pivotal role in permitting the formation of coordination polymers with high Ni contents. This consequently provides an opportunity for enabling the supersaturation of Ni in the NiCeOx structure during annealing, leading to the endogenous spillover of Ni from the depths of NiCeOx to its surface. The resulting heterostructure, featuring strongly coupled amorphous NiO and crystalline NiCeOx, exhibits harmonious interactions in addition to low overpotentials and high catalytic stability in the oxygen evolution reaction (OER). Theoretical calculations prove that the amorphous-crystalline interfaces facilitate charge transfer, which plays a critical role in regulating the local electron density of the Ni sites, thereby promoting the adsorption of oxygen-based intermediates on the Ni sites and lowering the dissociation-related energy barriers. Overall, this study underscores the potential of coordinating different metal ions at the molecular level to advance amorphous-crystalline heterostructure design.

Selective oxygen reduction reaction: mechanism understanding, catalyst design and practical application

The oxygen reduction reaction (ORR) is a key component for many clean energy technologies and other industrial processes. However, the low selectivity and the sluggish reaction kinetics of ORR catalysts have hampered the energy conversion efficiency and real application of these new technologies mentioned before. Recently, tremendous efforts have been made in mechanism understanding, electrocatalyst development and system design. Here, a comprehensive and critical review is provided to present the recent advances in the field of the electrocatalytic ORR. The two-electron and four-electron transfer catalytic mechanisms and key evaluation parameters of the ORR are discussed first. Then, the up-to-date synthetic strategies and in situ characterization techniques for ORR electrocatalysts are systematically summarized. Lastly, a brief overview of various renewable energy conversion devices and systems involving the ORR, including fuel cells, metal-air batteries, production of hydrogen peroxide and other chemical synthesis processes, along with some challenges and opportunities, is presented.

Experimentally validating sabatier plot by molecular level microenvironment customization for oxygen electroreduction

Microenvironmental modifications on metal sites are crucial to tune oxygen reduction catalytic behavior and decrypt intrinsic mechanism, whereas the stochastic properties of traditional pyrolyzed single-atom catalysts induce vague recognition on structure-reactivity relations. Herein, we report a theoretical descriptor relying on binding energies of oxygen adsorbates and directly associating the derived Sabatier volcano plot with calculated overpotential to forecast catalytic efficiency of cobalt porphyrin. This Sabatier volcano plot instructs that electron-withdrawing substituents mitigate the over-strong *OH intermediate adsorption by virtue of the decreased proportion of electrons in bonding orbital. To experimentally validate this speculation, we implement a secondary sphere microenvironment customization strategy on cobalt porphyrin-based polymer nanocomposite analogs. Systematic X-ray spectroscopic and in situ electrochemical characterizations capture the pronounced accessible active site density and the fast interfacial/outward charge migration kinetics contributions for the optimal carboxyl group-substituted catalyst. This work offers ample strategies for designing single-atom catalysts with well-managed microenvironment under the guidance of Sabatier volcano map.

Asymmetrically Coordinated Calcium Single Atom for High-Performance Oxygen Reduction Reaction

S-block single atoms represent an ideal catalyst for the oxygen reduction reaction (ORR) as they can suppress the Fenton reaction. However, the symmetry of the s/p orbitals tends to generate either an excessively strong or weak interaction with intermediates. Herein, Ca single atoms coordinated with -S, -OP, and three N atoms (Ca/NPS-HC) were fabricated to modulate the adsorption of intermediates and promote the efficiency of s-block ORR catalysts. The experimental results from ORR demonstrated that the Ca/NPS-HC catalyst exhibited outstanding catalytic capability with a half-wave potential of 0.89 V, a kinetic current density of 56.6 mA cm-2 at 0.85 V, and a Tafel slope of 42 mV dec-1, outperforming commercial Pt/C. The detailed mechanistic studies revealed that the asymmetric coordination of Ca single atoms led to the symmetry-breaking of electron distribution in Ca single atoms, attenuating the s-p hybridization from the intermediate adsorption process, and thereby minimizing the energy barrier of the whole ORR.

Iron-Cobalt Phosphide Encapsulated in a N-Doped Carbon Framework as a Promising Low-Cost Oxygen Reduction Electrocatalyst for Zinc-Air Batteries

The oxygen reduction reaction (ORR) plays a vital role in many next-generation electrochemical energy conversion and storage devices, motivating the search for low-cost ORR electrocatalysts possessing high activity and excellent durability. In this work, we demonstrate that iron-cobalt phosphide (FeCoP) nanoparticles encapsulated in a N-doped carbon framework (FeCoP@NC) represent a very promising catalyst for the ORR in alkaline media. The core-shell structured FeCoP@NC catalyst offered outstanding ORR activity with a half-wave potential (E1/2) of 0.86 V vs reversible hydrogen electrode (RHE) and excellent stability in a 0.1 M KOH electrolyte, outperforming commercial Pt/C and many recently reported noble-metal-free ORR electrocatalysts. The superiority of FeCoP@NC as an ORR electrocatalyst relative to Pt/C was further verified in prototype zinc-air batteries (ZABs), with the aqueous and flexible ZABs prepared using FeCoP@NC offering excellent stability, impressive open circuit voltages (1.56 and 1.44 V, respectively), and high maximum power densities (183.5 and 69.7 mW cm-2, respectively). Density functional theory calculations revealed that encapsulating FeCoP nanoparticles in N-doped carbon shells resulted in favorable electron penetration effects, which synergistically regulated the adsorption/desorption of ORR intermediates for optimal ORR performance while also boosting the electronic conductivity. Our findings offer valuable new insights for rational design of transition metal phosphide-based catalysts for the ORR and other electrochemical applications.

Asymmetric Coordination Regulating D-Orbital Spin-Electron Filling in Single-Atom Iron Catalyst for Efficient Oxygen Reduction

The single-atom Fe-N-C catalyst has shown great promise for the oxygen reduction reaction (ORR), yet the intrinsic activity is not satisfactory. There is a pressing need to gain a deeper understanding of the charge configuration of the Fe-N-C catalyst and to develop rational modulation strategies. Herein, we have prepared a single-atom Fe catalyst with the co-coordination of N and O (denoted as Fe-N/O-C) and adjacent defect, proposing a strategy to optimize the d-orbital spin-electron filling of Fe sites by fine-tuning the first coordination shell. The Fe-N/O-C exhibits significantly better ORR activity compared to its Fe-N-C counterpart and commercial Pt/C, with a much more positive half-wave potential (0.927 V) and higher kinetic current density. Moreover, using the Fe-N/O-C catalyst, the Zn-air battery and proton exchange membrane fuel cell achieve peak power densities of up to 490 and 1179 mW cm-2, respectively. Theoretical studies and in situ electrochemical Raman spectroscopy reveal that Fe-N/O-C undergoes charge redistribution and negative shifting of the d-band center compared to Fe-N-C, thus optimizing the adsorption free energy of ORR intermediates. This work demonstrates the feasibility of introducing an asymmetric first coordination shell for single-atom catalysts and provides a new optimization direction for their practical application.

Optimizing the Activation Energy of Reactive Intermediates on Single-Atom Electrocatalysts: Challenges and Opportunities

Single-atom catalysts (SACs) have made great progress in recent years as potential catalysts for energy conversion and storage due to their unique properties, including maximum metal atoms utilization, high-quality activity, unique defined active sites, and sustained stability. Such advantages of single-atom catalysts significantly broaden their applications in various energy-conversion reactions. Given the extensive utilization of single-atom catalysts, methods and specific examples for improving the performance of single-atom catalysts in different reaction systems based on the Sabatier principle are highlighted and reactant binding energy volcano relationship curves are derived in non-homogeneous catalytic systems. The challenges and opportunities for single-atom catalysts in different reaction systems to improve their performance are also focused upon, including metal selection, coordination environments, and interaction with carriers. Finally, it is expected that this work may provide guidance for the design of high-performance single-atom catalysts in different reaction systems and thereby accelerate the rapid development of the targeted reaction.

Atomically Dispersed Ce Sites Augmenting Activity and Durability of Fe-Based Oxygen Reduction Catalyst in PEMFC

In the cathode of proton exchange membrane fuel cells (PEMFCs), Fe and N co-doped carbon (Fe-N-C) materials with atomically dispersed active sites are one of the satisfactory candidates to replace Pt-based catalysts. However, Fe-N-C catalysts are vulnerable to attack from reactive oxygen species, resulting in inferior durability, and current strategies failing to balance the activity and stability. Here, this study reports Fe and Ce single atoms coupled catalysts anchored on ZIF-8-derived nitrogen-doped carbon (Fe/Ce-N-C) as an efficient ORR electrocatalyst for PEMFCs. In PEMFC tests, the maximum power density of Fe/Ce-N-C catalyst reached up to 0.82 W cm-2, which is 41% larger than that of Fe-N-C. More importantly, the activity of Fe/Ce-N-C catalyst only decreased by 21% after 30 000 cycles under H2/air condition. Density functional theory reveals that the strong coupling between the Fe and Ce sites result in the redistribution of electrons in the active sites, which optimizes the adsorption of OH* intermediates on the catalyst and increases the intrinsic activity. Additionally, the admirable radical scavenging ability of the Ce sites ensured that the catalysts gained long-term stability. Therefore, the addition of Ce single atoms provides a new strategy for improving the activity and durability of oxygen reduction catalysts.

Multiscale nanoengineering fabrication of air electrode catalysts in rechargeable Zn-air batteries

The development of cost-effective, high-activity and stable catalysts to accelerate the sluggish kinetics of cathodic oxygen reduction/evolution reactions (ORR/OER) plays a critical part in commercialization application of rechargeable Zn-air batteries (RZABs). Herein, a multiscale nanoengineering strategy is developed to simultaneously stabilize Co-doped Fe nanoparticles originated from metal-organic framework-derived approach and atomic Fe/Co sites derived from metal nanoparticle-atomized way on N-doped hierarchically tubular porous carbon substrate. Thereinto, metal nanoparticles and single atoms are respectively used to expedite the OER and ORR. Consequently, the final material is acted as an oxygen electrode catalyst, displaying 0.684 V of OER/ORR potential gap, 260 mW cm-2 of peak power density for liquid-state RZAB, 110 mW cm-2 of peak power density for solid-state RZAB, and 1000 charge-discharge cycles without decay, which confirms great potential for energy storage and conversion applications.

Selective Oxidation of sp-Bonded Carbon in Graphdiyne/Carbon Nanotubes Heterostructures to Form Dominant Epoxy Groups for Two-Electron Oxygen Reduction

Two-electron oxygen reduction reaction (2e- ORR) is of great significance to H2O2 production and reversible nonalkaline Zn-air batteries (ZABs). Multiple oxygen-containing sp2-bonded nanocarbons have been developed as electrocatalysts for 2e- ORR, but they still suffer from poor activity and stability due to the limited and mixed active sites at the edges as well as hydrophilic character. Herein, graphdiyne (GDY) with rich sp-C bonds is studied for enhanced 2e- ORR. First, computational studies show that GDY has a favorable formation energy for producing five-membered epoxy ring-dominated groups, which is selective toward the 2e- ORR pathway. Then based on the difference in chemical activity of sp-C bonds in GDY and sp2-C bonds in CNTs, we experimentally achieved conductive and hydrophobic carbon nanotubes (CNTs) covering O-modified GDY (CNTs/GDY-O) through a mild oxidation treatment combined with an in situ CNTs growth approach. Consequently, the CNTs/GDY-O exhibits an average Faraday efficiency of 91.8% toward H2O2 production and record stability over 330 h in neutral media. As a cathode electrocatalyst, it greatly extends the lifetime of 2e- nonalkaline ZABs at both room and subzero temperatures.

Spray Pyrolysis Regulated FeCo Alloy Anchoring on Nitrogen-Doped Carbon Hollow Spheres Boost the Performance of Zinc-Air Batteries

Low-cost and high-efficiency non-precious metal-based oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) bifunctional catalysts are the key to promoting the commercial application of metal-air batteries. Herein, a highly efficient catalyst of Fe0.18Co0.82 alloy anchoring on the nitrogen-doped porous carbon hollow sphere (FexCo1-x/N-C) is intelligently designed by spray pyrolysis (SP). The zinc in the SP-derived metal oxides and metal-organic framework volatilize at high temperature to construct a hierarchical porous structure with abundant defects and fully exposes the FeCo nanoparticles which uniformly anchor on the carbon substrate. In this structure, the coexistence of Fe0.18Co0.82 alloy and binary metal active sites (Fe-Nx/Co-Nx) guarantees the Fe0.2Co0.8/N-C catalyst exhibiting an excellent half-wave potential (E1/2 ═ 0.84 V) superior to 20% Pt/C for ORR and a suppressed overpotential (280 mV) than RuO2 for OER. Assembled rechargeable Zn-air battery (RZAB) demonstrates a promising specific capacity of 807.02 mAh g-1, peak power density of 159.08 mW cm-2 and durability without electrolyte circulation (550 h). This work proposes the design concept of utilizing an oxide core to in situ consume the porous carbon shell for anchoring metal active sites and construct defects, which benefits from spray pyrolysis in achieving precise control of the alloy structure and mass preparation.

Zn-based batteries for sustainable energy storage: strategies and mechanisms

Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.

External Field-Responsive Ternary Non-Noble Metal Oxygen Electrocatalyst for Rechargeable Zinc-Air Batteries

Despite the increasing effort in advancing oxygen electrocatalysts for zinc-air batteries (ZABs), the performance development gradually reaches a plateau via only ameliorating the electrocatalyst materials. Herein, a new class of external field-responsive electrocatalyst comprising Ni0.5Mn0.5Fe2O4 stably dispersed on N-doped Ketjenblack (Ni0.5Mn0.5Fe2O4/N-KB) is developed via polymer-assisted strategy for practical ZABs. Briefly, the activity indicator ΔE is significantly decreased to 0.618 V upon photothermal assistance, far exceeding most reported electrocatalysts (generally >0.680 V). As a result, the photothermal electrocatalyst possesses comprehensive merits of excellent power density (319 mW cm-2), ultralong lifespan (5163 cycles at 25 mA cm-2), and outstanding rate performance (100 mA cm-2) for liquid ZABs, and superb temperature and deformation adaptability for flexible ZABs. Such improvement is attributed to the photothermal-heating-enabled synergy of promoted electrical conductivity, reactant-molecule motion, active area, and surface reconstruction, as revealed by operando Raman and simulation. The findings open vast possibilities toward more-energy-efficient energy applications.

In situ Construction of Multistage Core-Shell Nanostructure as Bifunctional Catalyst for Ultrastable Zinc-Air Batteries

Many efforts have been devoted to obtaining excellent cathode catalysts for Zinc air batteries (ZABs), but the inevitable use of binder will damage the catalytic activity and weaken long-term stability, inefficient mass transfer of oxygen is also chargable for the limited activity. Herein, in situ grown hydrogen substituted graphdiyne (HGDY) on carbon paper has been prepared and used as cathode catalyst layer in ZABs. Multiple catalytic sites are firmly combined and end with the boosted bifunctional catalytic activity of oxygen reduction and oxygen evolution. Moreover, the specific surface area, sufficient active sites, multilevel pore nanostructure and robust conductivity are fully exposed to establish efficient catalytic interface and skeleton. Cu/Co nanoparticles are uniformly distributed and warped by HGDY network, which can stably exist during the catalytic process. As a result, a current density of 18.75 mA cm-2 and a Tafel slope of 61.06 mV dec-1 for oxygen reduction and a ultralong operation for more than 2300 h in aqueous ZAB have been achieved, which is beyond many reported bifunctional catalysts in ZAB system.

Modulation of Electronic Synergy to Enhance the Intrinsic Activity of Fe5Ni4S8 Nanosheets in Restricted Space Carbonized Wood Frameworks for Efficient Oxygen Evolution Reaction

Modulation of electronic structure and composition is widely recognized as an effective strategy to improve electrocatalyst performance. Herein, using a simple simultaneous carbonization and sulfidation strategy, NiFe double hydroxide-derived Fe5Ni4S8 (FNS) nanosheets immobilized on S-doped carbonized wood (SCW) framework by taking benefit of the orientation-constrained cavity and hierarchical porous structure of wood is proposed. Benefiting from the synergistic relationships between bimetal ions, the spatial confinement offered by the wood cavity, and the enhanced structural effects of the nanosheets array, the FNS/SCW exhibit enhanced intrinsic activity, increased accessibility of catalytically active sites, and convection-facilitated mass transport, resulting in an excellent oxygen evolution reaction (OER) activity and durability. Specifically, it takes a low overpotential of 230 mV at 50 mA cm-2 and potential increase is negligible (3.8%) at 50 mA cm-2 for 80 hours. Density functional theory (DFT) calculations further reveal that the synergistic effect of bimetal can optimize the electronic structure and lower the reaction energy barrier. The FNS/SCW used as the cathode of zinc-air battery shows higher power density and excellent durability relative to commercial RuO2, exhibiting a good application prospect. Overall, this research offers proposals for designing and producing effective OER electrocatalysts using sustainable resources.