High-performance five-ring-fused organic semiconductors for field-effect transistors

Theoretical Study on Optoelectronic Properties of 1,4-Dithiazole-5,10-dihydrophenazine and Its B ← N-Fused Derivatives

Recently, Liu et al. reported 1,4-dithiazole-5,10-dihydrophenazine (DTDHP) and its B ← N-fused derivative (DTHDHP-BF2), which were expected to show excellent optoelectronic properties (Angew. Chem. Int. Ed. 2022, 61, e202205893). However, their charge-transport performance and luminescence emission mechanisms have not been revealed. In this work, we used density functional theory (DFT) calculations to investigate the optoelectronic properties of DTDHP and DTHDHP-BF2 and analyzed the influence of the introduction of -BF2 on the basic parameters governing charge transport and injection in detail. Our calculation results showed that adding -BF2 could stabilize the frontier molecular orbitals and decrease the reorganization energies associated with electron transport due to the formation of B ← N bonds, and the intermolecular electronic couplings are greatly enhanced owing to the strong intermolecular F···H interactions. Based on the master equation coupled with the Marcus-Hush electron transfer theory, we theoretically predicted the charge transport properties of DTDHP and DTHDHP-BF2. The optimum hole mobility (3.87 cm2 V-1 S-1) and electron mobility (1.52 cm2 V-1 S-1) of DTHDHP-BF2 are, respectively, 3 and 9 times as high as the corresponding optimum values of compound DTDHP. Moreover, the assignments of multiple fluorescence bands in the experiment were confirmed by time-dependent density functional theory (TDDFT) calculations. The simulated emission spectra indicate that the experimental fluorescence maxima at 687 nm originates from the S1 → S0 transition of the double proton transfer phototautomer (T2H) of DTDHP, and the shoulder peak at ∼660 nm may be related to the excited-state single-proton transfer phototautomer (T1H); for DTHDHP-BF2, the experimental fluorescence maxima at 687 nm should be attributed to normal Stokes shifted emission, and the shifted fluorescence with a peak at 751 nm originates from the emission of the photodissociation product of DTHDHP-BF2.

A Domino Protocol toward High-performance Unsymmetrical Dibenzo[d,d']thieno[2,3-b;4,5-b']dithiophenes Semiconductors

Unsymmetric organic semiconductors have many advantages such as good solubility, rich intermolecular interactions for potential various optoelectronic applications. However, their synthesis is more challenging due to intricate structures thus normally suffering tedious synthesis. Herein, we report a trisulfur radical anion (S3⋅-) triggered domino thienannulation strategy for the synthesis of dibenzo[d,d']thieno[2,3-b;4,5-b']dithiophenes (DBTDTs) using readily available 1-halo-2-ethynylbenzenes as starting materials. This domino protocol features no metal catalyst and the formation of six C-S and one C-C bonds in a one-pot reaction. Mechanistic study revealed a unique domino radical anion pathway. Single crystal structure analysis of unsymmetric DBTDT shows that its unique unsymmetric structure endows rich and multiple weak S⋅⋅⋅S interactions between molecules, which enables the large intermolecular transfer integrals of 86 meV and efficient charge transport performance with a carrier mobility of 1.52 cm2 V-1 s-1. This study provides a facile and highly efficient synthetic strategy for more high-performance unsymmetric organic semiconductors.

Organic Optoelectronic Materials: A Rising Star of Bioimaging and Phototherapy

Recently, many organic optoelectronic materials (OOMs), especially those used in organic light-emitting diodes (OLEDs), organic solar cells (OSCs), and organic field-effect transistors (OFETs), are explored for biomedical applications including imaging and photoexcited therapies. In this review, recently developed OOMs for fluorescence imaging, photoacoustic imaging, photothermal therapy, and photodynamic therapy, are summarized. Relationships between their molecular structures, nanoaggregation structures, photophysical mechanisms, and properties for various biomedical applications are discussed. Mainly four kinds of OOMs are covered: thermally activated delayed fluorescence materials in OLEDs, conjugated small molecules and polymers in OSCs, and charge-transfer complexes in OFETs. Based on the OOMs unique optical properties, including excitation light wavelength and exciton dynamics, they are respectively exploited for suitable biomedical applications. This review is intended to serve as a bridge between researchers in the area of organic optoelectronic devices and those in the area of biomedical applications. Moreover, it provides guidance for selecting or modifying OOMs for high-performance biomedical uses. Current challenges and future perspectives of OOMs are also discussed with the hope of inspiring further development of OOMs for efficient biomedical applications.

Controllable π-π coupling of intramolecular dimer models in aggregated states

π-π coupling as a common interaction plays a key role in emissions, transport and mechanical properties of organic materials. However, the precise control of π-π coupling is still challenging owing to the possible interference from other intermolecular interactions in the aggregated state, usually resulting in uncontrollable emission properties. Herein, with the rational construction of intramolecular dimer models and crystal engineering, π-π coupling can be subtly modulated by conformation variation with balanced π-π and π-solvent interactions and visualized by green-to-blue emission switching. Moreover, it can rapidly respond to temperature, pressure and mechanical force, affording a facile way to modulate π-π coupling in situ. This work contributes to a deeper understanding of the internal mechanism of molecular motions in aggregated states.

Two-Dimensional Nonbenzenoid Heteroacene Crystals Synthesized via In-Situ Embedding of Ladder Bipyrazinylenes on Au(111)

Precisely introducing topological defects is an important strategy in nanographene crystal engineering because defects can tune π-electronic structures and control molecular assemblies. The synergistic control of the synthesis and assembly of nanographenes by embedding the topological defects to afford two-dimensional (2D) crystals on surfaces is still a great challenge. By in-situ embedding ladder bipyrazinylene (LBPy) into acene, the narrowest nanographene with zigzag edges, we have achieved the precise preparation of 2D nonbenzenoid heteroacene crystals on Au(111). Through intramolecular electrocyclization of o-diisocyanides and Au adatom-directed [2+2] cycloaddition, the nonbenzenoid heteroacene products are produced with high chemoselectivity, and lead to the molecular 2D assembly via LBPy-derived interlocking hydrogen bonds. Using bond-resolved scanning tunneling microscopy, we determined the atomic structures of the nonbenzenoid heteroacene product and diverse organometallic intermediates. The tunneling spectroscopy measurements revealed the electronic structure of the nonbenzenoid heteroacene, which is supported by density functional theory (DFT) calculations. The observed distinct organometallic intermediates during progression annealing combined with DFT calculations demonstrated that LBPy formation proceeds via electrocyclization of o-diisocyanides, trapping of heteroarynes by Au adatoms, and stepwise elimination of Au adatoms.

Diselenophene-Dithioalkylthiophene Based Quinoidal Small Molecules for Ambipolar Organic Field Effect Transistors

This work presents a series of novel quinoidal organic semiconductors based on diselenophene-dithioalkylthiophene (DSpDST) conjugated cores with various side-chain lengths (-thiohexyl, -thiodecyl, and -thiotetradecyl, designated DSpDSTQ-6, DSpDSTQ-10, and DSpDSTQ-14, respectively). The purpose of this research is to develop solution-processable organic semiconductors using dicyanomethylene end-capped organic small molecules for organic field effect transistors (OFETs) application. The physical, electrochemical, and electrical properties of these new DSpDSTQs are systematically studied, along with their performance in OFETs and thin film morphologies. Additionally, the molecular structures of DSpDSTQ are determined through density functional theory (DFT) calculations and single-crystal X-ray diffraction analysis. The results reveal the presence of intramolecular S (alkyl)···Se (selenophene) interactions, which result in a planar SR-containing DSpDSTQ core, thereby promoting extended π-orbital interactions and efficient charge transport in the OFETs. Moreover, the influence of thioalkyl side chain length on surface morphologies and microstructures is investigated. Remarkably, the compound with the shortest thioalkyl chain, DSpDSTQ-6, demonstrates ambipolar carrier transport with the highest electron and hole mobilities of 0.334 and 0.463 cm2 V-1 s-1 , respectively. These findings highlight the excellence of ambipolar characteristics of solution-processable OFETs based on DSpDSTQs even under ambient conditions.

Tosylazide as N1-Synthon: Iron-Catalyzed Nitrogenative Dimerization of Indoles to p-Bisindolopyrazine Derivatives

We present a straightforward one-step process to access a range of novel p-diindolepyrazines via an unprecedented [n-Bu4N][Fe(CO)3(NO)] (TBA[Fe])-catalyzed intermolecular nitrogenative dimerization of various indole derivatives. Remarkably, tosylazide functions as a N1-synthon forming the central pyrazine unit that joins the two indole subunits. The catalytic transformation shows a good substrate scope, and the obtained products show interesting electronic properties.

New fluorene-based bipolar charge transporting materials

Air-stable and solution-processable fluorene-based bipolar charge transporting materials (CTMs) were designed, synthesized, and analyzed. These CTMs feature anthraquinone, 9-fluorenone, and 9-dicyanofluorenylidine groups and exhibit good film formation properties for solvent processing. Quantum chemistry simulations and optical absorption measurements proved that several stable conformers and charge transfer complexes form inside the molecules. Hole mobilities in CTMs were around 10-4 to 10-5 cm2 V-1 s-1, while electron mobility in compounds with anthraquinone and 9-dicyanofluorenylidine groups was approximately one order of magnitude lower.

Discovery of Organic Optoelectronic Materials Powered by Oxidative Ar-H/Ar-H Coupling

Efficient and streamlined synthetic methods that facilitate the rapid build-up of structurally diverse π-conjugated systems are of paramount importance in the quest for organic optoelectronic materials. Among these methods, transition-metal-catalyzed oxidative Ar-H/Ar-H coupling reactions between two (hetero)arenes have emerged as a concise and effective approach for generating a wide array of bi(hetero)aryl and fused heteroaryl structures. This innovative approach bypasses challenges associated with substrate pre-activation processes, thereby allowing for the creation of frameworks that were previously beyond reach using conventional Ar-X/Ar-M coupling reactions. These inherent advantages have ushered in new design patterns for organic optoelectronic molecules that deviate from traditional methods. This ground-breaking approach enables the transcendence of the limitations of repetitive material structures, ultimately leading to the discovery of novel high-performance materials. In this Perspective, we provide an overview of recent advances in the development of organic optoelectronic materials through the utilization of transition-metal-catalyzed oxidative Ar-H/Ar-H coupling reactions. We introduce several notable synthetic strategies in this domain, covering both directed and non-directed oxidative Ar-H/Ar-H coupling strategies, dual chelation-assisted strategy and directed ortho-C-H arylation/cyclization strategy. Additionally, we shed light on the role of oxidative Ar-H/Ar-H coupling reactions in the advancement of high-performance organic optoelectronic materials. Finally, we discuss the current limitations of existing protocols and offer insights into the future prospects for this field.

Nonfullerene Acceptor Featuring Unique Self-Regulation Effect for Organic Solar Cells with 19 % Efficiency

The blend nanomorphology of electron-donor (D) and -acceptor (A) materials is of vital importance to achieving highly efficient organic solar cells. Exogenous additives especially aromatic additives are always needed to further optimize the nanomorphology of blend films, which is hardly compatible with industrial manufacture. Herein, we proposed a unique approach to meticulously modulate the aggregation behavior of NFAs in both crystal and thin film nanomorphology via self-regulation effect. Nonfullerene acceptor Z9 was designed and synthesized by tethering phenyl groups on the inner side chains of the Y6 backbone. Compared with Y6, the tethered phenyl groups participated in the molecular aggregation via the π-π stacking of phenyl-phenyl and phenyl-2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC-2F) groups, which induced 3D charge transport with phenyl-mediated super-exchange electron coupling. Moreover, ordered molecular packing with suitable phase separation was observed in Z9-based blend films. High power conversion efficiencies (PCEs) of 19.0 % (certified PCE of 18.6 %) for Z9-based devices were achieved without additives, indicating the great potential of the self-regulation strategy in NFA design.

New Quinoid Bio-Inspired Materials Using Para-Azaquinodimethane Moiety

Quinoid single molecules are regarded as promising materials for electronic applications due to their tunable chemical structure-driven properties. A series of three single bio-inspired quinoid materials containing para-azaquinodimethane (p-AQM) moiety were designed, synthesized and characterized. AQM1, AQM2 and AQM3, prepared using aldehydes derived from almonds, corncobs and cinnamon, respectively, were studied as promising quinoid materials for optoelectronic applications. The significance of facile synthetic procedures is highlighted through a straightforward two-step synthesis, using Knoevenagel condensation. The synthesized molecules showed molar extinction coefficients of 22,000, 32,000 and 61,000 L mol-1 cm-1, respectively, for AQM1, AQM2 and AQM3. The HOMO-LUMO energy gaps were calculated experimentally, theoretically showing the same trends: AQM3 < AQM2 < AQM1. The role of the aryl substituent was studied and showed an impact on the electronic properties. DFT calculations show planar structures with quinoidal bond length alternation, in agreement with the experimental results. Finally, these bio-based materials showed high thermal stabilities between 290 °C and 340 °C and a glassy behavior after the first heating-cooling scan. These results highlight these bio-based single molecules as potential candidates for electronic or biomedical applications.

Insight into the effect of side chains on thermal transport of organic semiconductors

Understanding the correlation mechanism of side chains on thermal transport of organic semiconductors is crucial for functionalized organic electronics. In this study, phenyl and alkyl side chains, two representatives of side chain engineering, are chosen to modify dinaphtho-[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) to synthesize Ph-DNTT and C10-DNTT. The thermal conductivities of the three organic semiconductors exhibit obvious anisotropy, and the corresponding relationships are along-chain > inter-chain > cross-chain. The phenyl side chains enhance the thermal conductivity in the along-chain direction and degrade it in the inter-chain direction, while the alkyl side chains hinder thermal transport. In the cross-chain direction, side chains have a slight effect on thermal transport. The structure orientation consistency between the phenyl side chains and the main chains in Ph-DNTT leads to phonon coupling in the along-chain direction, which improves phonon transport. In the inter-chain direction, the combined effect of the phonon group velocity and phonon participation ratio causes the thermal conductivity degeneracy of Ph-DNTT. For C10-DNTT, the vibrational mismatch between the alkyl side chains and the main chains results in the degradation of thermal transport in the along-chain and inter-chain directions. In the cross-chain direction, the nonbonding interaction dominates the energy transfer in the three organic semiconductors, which induces inferior phonon transport properties and weak effects of side chains.

Enhancing Gating Performance in Organic Molecular Field-Effect Transistors by Introducing Polar Azulene Components

Organic molecular field-effect transistors (FETs) are promising building components for future electronic circuits. Efficient control of charge transport properties is one key issue in the design of organic molecular FETs. In this study, we propose a redesign of a naphthalene-based FET by introducing two azulene components in opposite dipole moment directions. Using density functional theory combined with non-equilibrium Green's function, the simulated electronic transport characteristics reveal that the introduction of polar azulene components effectively narrows the frontier molecular orbitals gap, leading to an increase in the ON-state current. Meanwhile, the OFF-state current is significantly suppressed by highly localizing the dominant electronic transport channel. As a result, improved gate controllability is achieved with a higher ON-OFF current ratio, which is nearly seven times higher than that of the naphthalene-based FET device. These findings provide theoretical directions for future design of organic molecular FET devices with enhanced gating regulation efficiency.

Commonly Neglected Ester Groups Enhanced Microwave Absorption

Oxygen-containing functional groups have high potential to excite polarization loss. The nature and mechanism of the polarization loss brought on by oxygen-containing functional groups, however, remain unclear. In this study, metal-organic framework precursors are in situ pyrolyzed to produce ultrathin carbon nanosheets (UCS) that are abundant in oxygen functional groups. By altering the pyrolysis temperature, the type and concentration of functional groups are altered to produce good microwave absorption capabilities. It is demonstrated that the main processes of electromagnetic loss are polarization caused by "field effects and induced effects" brought on by strongly polar ester functional groups. Moreover, links between various oxygen functional groups and structural flaws are established, and their respective contributions to polarization are sharply separated. The sample with the highest ester group content ultimately achieves an effective absorption bandwidth of 6.47 GHz at a pyrolysis temperature of 800°C. This research fills a theoretical hole in the frequently overlooked polarization mechanism in the microwave band by defining the key polarization parameters in chaotic multiple dipole systems and, in particular, redefining the significance of ester groups.

A reconfigurable binary/ternary logic conversion-in-memory based on drain-aligned floating-gate heterojunction transistors

A new type of heterojunction non-volatile memory transistor (H-MTR) has been developed, in which the negative transconductance (NTC) characteristics can be controlled systematically by a drain-aligned floating gate. In the H-MTR, a reliable transition between N-shaped transfer curves with distinct NTC and monolithically current-increasing transfer curves without apparent NTC can be accomplished through programming operation. Based on the H-MTR, a binary/ternary reconfigurable logic inverter (R-inverter) has been successfully implemented, which showed an unprecedentedly high static noise margin of 85% for binary logic operation and 59% for ternary logic operation, as well as long-term stability and outstanding cycle endurance. Furthermore, a ternary/binary dynamic logic conversion-in-memory has been demonstrated using a serially-connected R-inverter chain. The ternary/binary dynamic logic conversion-in-memory could generate three different output logic sequences for the same input signal in three logic levels, which is a new logic computing method that has never been presented before.

Recent Research Progress of Organic Small-Molecule Semiconductors with High Electron Mobilities

Organic electronics has made great progress in the past decades, which is inseparable from the innovative development of organic electronic devices and the diversity of organic semiconductor materials. It is worth mentioning that both of these great advances are inextricably linked to the development of organic high-performance semiconductor materials, especially the representative n-type organic small-molecule semiconductor materials with high electron mobilities. The n-type organic small molecules have the advantages of simple synthesis process, strong intermolecular stacking, tunable molecular structure, and easy to functionalize structures. Furthermore, the n-type semiconductor is a remarkable and important component for constructing complementary logic circuits and p-n heterojunction structures. Therefore, n-type organic semiconductors play an extremely important role in the field of organic electronic materials and are the basis for the industrialization of organic electronic functional devices. This review focuses on the modification strategies of organic small molecules with high electron mobility at molecular level, and discusses in detail the applications of n-type small-molecule semiconductor materials with high mobility in organic field-effect transistors, organic light-emitting transistors, organic photodetectors, and gas sensors.

Molecular Engineering of Chalcogen-Embedded Anthanthrenes via peri-Selective C-H Activation: Fine-Tuning of Crystal Packing for Organic Field-Effect Transistors

Disclosed herein is a RhCl₃ -catalyzed peri-selective C-H/C-H oxidative homo-coupling of 1-substituted naphthalenes, which provides a highly efficient and streamlined approach to chalcogen-embedded anthanthrenes from readily available starting materials. Introducing O, S, and Se into the anthanthrene skeleton leads to gradually increased π-π stacking distances but significantly enhanced π-π overlaps with the growth of the hetero-atom radius. Moderate π-π distance, overlap area, and intermolecular S-S interactions endow S-embedded anthanthrene (PTT) with excellent 2D charge-transport properties. Moreover, the transformation of p-type to n-type S-embedded anthanthrenes is realized for the first time via the S-atom oxidation from PTT to PTT-O4. In organic field-effect transistor devices, PTT derivatives exhibit hole transport with mobilities up to 1.1 cm²  V^-1  s^-1 , while PTT-O4 shows electron transport with a mobility of 0.022 cm²  V^-1  s^-1 .

Aggregation-Induced Emission of Contorted Polycondensed Aromatic Hydrocarbons Made by Edge Extension Using a Palladium-Catalyzed Cyclopentannulation Reaction

Contorted polycyclic aromatic hydrocarbons (PAHs), CPA1-2 and CPB1-2, bearing peripheral five-membered rings were synthesized employing a palladium-catalyzed cyclopentannulation reaction using specially designed diaryl acetylene synthons TPE and TPEN with commercially available dibromo- anthracene DBA and bianthracene DBBA derivatives. The resulting target compounds CPA1-2 and CPB1-2 were isolated in excellent yield and found to be highly soluble in common organic solvents, which allowed for their structural characterization and investigation of the photophysical properties, disclosing their aggregation-induced emission (AIE) properties in THF at selective concentration ranges of water fractions in the solvent mixture. Examination of the contorted PAH structures by means of density functional theory (DFT) revealed higher electronic conjugation in the more rigid and planar anthracene-containing CPA1-2 derivatives when compared to the twisted bianthracene-bearing moieties CBPA1-2 with HOMO-LUMO bandgaps (ΔE) of ∼2.32 eV for the former PAHs and ∼2.78 eV for the latter ones.

The Radical Anion, Dianion and Electron Transport Properties of Tetraiodotetraazapentacene

Tetraiodotetraazapentacene I₄ TAP, the last missing derivative in the series of halogenated silylated tetraazapentacenes, was synthesized via condensation chemistry from a TIPS-ethynylated diaminobenzothiadiazol in three steps. Single and double reduction furnished its air-stable monoanion and relatively air-stable dianion, both of which were characterized by crystallography. All three species are structurally and spectroscopically compared to non-halogenated TAP and Br₄ TAP. I₄ TAP is an n-channel material in thin-film transistors with average electron mobilities exceeding 1 cm² (Vs)^-1 .

Isomeric dibenzooctazethrene diradicals for high-performance air-stable organic field-effect transistors

Realizing both high-performance and air-stability is key to advancing singlet-diradical-based semiconductors to practical applications and realizing their material potential associated with their open-shell nature. Here a concise synthetic route toward two stable dibenzooctazethrene isomers, DBOZ1 and DBOZ2, was demonstrated. In the crystalline phase, DBOZ2 exhibits two-dimensional brick wall packing with a high degree of intermolecular electronic coupling, leading to a record-breaking hole mobility of 3.5 cm2 V-1 s-1 for singlet diradical transistors, while retaining good device stability in the ambient air.

Derivatives of diphenylamine and benzothiadiazole in optoelectronic applications: a review

Light-emitting conjugated organic compounds have found special interest among researchers. Because of their adjustable optoelectronic properties they can be applied in e.g. field-effect transistors, sensors, light-emitting diodes or photovoltaic cells. In order to develop high-performance systems, it is important to understand the relationship between the structure and the photophysical properties of the material used. One of the employed strategies is to decrease the band gap of conjugated compounds, often achieved through a “donor–acceptor” approach. One of the popular groups applied as an electron-accepting unit are benzothiadiazoles, while diphenylamine exhibits good electron-donating ability. The functional groups can affect the energy levels of materials, influencing the color of the light emitted. This work presents a review of research focused on the structure-properties relationship of diphenylamine and benzothiadiazole derivatives with optoelectronic applications.