DNA-based FeCuAg nanoclusters with peroxidase-like and GSH depletion activities for toxicity of in vitro cancer cells

Developing the efficient nanozymes for reactive oxygen species (ROS)-mediated highly potent tumor catalytic therapy has become a great challenge. In this study, we prepared the DNA-Fe, -FeAg, and -FeCuAg nanocluster (NCs) using the G-/C-rich single-stranded DNA (ssDNA) templates. The steady-state kinetic and the catalytic performances and mechanisms of DNA-metal NCs were first systematically investigated. The results indicated that c-kit-TBA-Fe, c-kit-TBA-FeAg, and c-kit-TBA-FeCuAg NCs exhibited the high peroxidase-like activity. All of three types of NCs presented the higher affinity to the substrate TMB and better storage stability at 4 °C than horseradish peroxidase (HRP). Moreover, c-kit-TBA-FeAg and c-kit-TBA-FeCuAg NCs presented the 6.7- and 4.7-fold stronger affinity to TMB than c-kit-TBA-Fe, respectively. However, the maximum reaction rate (Vmax) of c-kit-TBA-FeCuAg NCs with H2O2 was the largest, which promoted the generation of much more •OH in the reaction system. More importantly, c-kit-TBA-FeCuAg NCs were able to deplete largely the intracellular GSH and thus generate lots of endogenous ROS in HeLa cells, thereby exhibiting the significant and specific in vitro cancer cells toxicity. Therefore, c-kit-TBA-FeCuAg NCs, with peroxidase-like activity and glutathione (GSH) consumption ability, hold the ROS-based promising therapeutic effects for cancer.

Cu-chelated polydopamine nanozymes with laccase-like activity for photothermal catalytic degradation of dyes

The industrial applications of enzymes are usually hindered by the high production cost, intricate reusability, and low stability in terms of thermal, pH, salt, and storage. Therefore, the de novo design of nanozymes that possess the enzyme mimicking biocatalytic functions sheds new light on this field. Here, we propose a facile one-pot synthesis approach to construct Cu-chelated polydopamine nanozymes (PDA-Cu NPs) that can not only catalyze the chromogenic reaction of 2,4-dichlorophenol (2,4-DP) and 4-aminoantipyrine (4-AP), but also present enhanced photothermal catalytic degradation for typical textile dyes. Compared with natural laccase, the designed mimic has higher affinity to the substrate of 2,4-DP with Km of 0.13 mM. Interestingly, PDA-Cu nanoparticles are stable under extreme conditions (temperature, ionic strength, storage), are reusable for 6 cycles with 97 % activity, and exhibit superior substrate universality. Furthermore, PDA-Cu nanozymes show a remarkable acceleration of the catalytic degradation of dyes, malachite green (MG) and methylene blue (MB), under near-infrared (NIR) laser irradiation. These findings offer a promising paradigm on developing novel nanozymes for biomedicine, catalysis, and environmental engineering.

A novel laccase-like Cu-MOF for colorimetric differentiation and detection of phenolic compounds

The development of convenient, fast, and cost-effective methods for differentiating and detecting common organic pollutant phenols has become increasingly important for environmental and food safety. In this study, a copper metal-organic framework (Cu-MOF) with flower-like morphology was synthesized using 2-methylimidazole (2-MI) as ligands. The Cu-MOF was designed to mimic the natural laccase active site and proved demonstrated excellent mimicry of enzyme-like activity. Leveraging the superior properties of the constructed Cu-MOF, a colorimetric method was developed for analyzing phenolic compounds. This method exhibited a wide linear range from 0.1 to 100 μM with a low limit of detection (LOD) of 0.068 μM. Besides, by employing principal component analysis (PCA), nine kinds of phenols was successfully distinguished and identified. Moreover, the combination of smartphones with RGB profiling enabled real-time, quantitative, and high-throughput detection of phenols. Therefore, this work presents a paradigm and offers guidance for the differentiation and detection of phenolic pollutants in the environment.

Portable Hydrogel Kits Made with Bimetallic Nanozymes for Point-of-Care Testing of Perfluorooctanesulfonate

Perfluorooctanesulfonate (PFOS), an emerging organic contaminant, necessitates robust on-site detection strategies to safeguard human health and ecological balance. This study introduces a novel point-of-care testing (POCT) platform, combining a hydrogel kit with nanozymes and smartphone technology, for the highly sensitive detection of PFOS. The strategy utilizes copper-substituted cobalt-based Prussian blue analogue nanoboxes (CuCo-PBA NBs), which exhibit intricate hollow structures and remarkable peroxidase-like catalytic activity, efficiently catalyzing the oxidation of chromogenic substrates with hydrogen peroxide (H2O2). Density functional theory calculations elucidate the adsorption dynamics of H2O2 on CuCo-PBA NBs, identifying the factors that improve the catalytic efficiency. The colorimetric POCT platform, integrating the hydrogel kit with a smartphone interface, demonstrates practical utility and achieves a detection limit of 1.43 × 10-8 mol L-1 for PFOS. This research not only presents a new nanozyme design for PFOS detection in diverse matrices, such as lake water, whole blood, urine, and milk, but also paves the way for developing a portable and efficient POCT platform for a variety of emerging contaminants.

Multifunctional Manganese-Nucleotide Laccase-Mimicking Nanozyme for Degradation of Organic Pollutants and Visual Assay of Epinephrine via Smartphone

As a natural green catalyst, laccase has extensive application in the fields of environmental monitoring and pollutant degradation. However, susceptibility to environmental influences and poor reusability seriously hinder its application. To address these concerns, for the first time, manganese ion replaced copper ion as the active center to coordinate with guanosine monophosphate (GMP) for synthesizing mimic laccase with high catalytic activity. Compared with natural laccase, the laccase-like nanozyme (Mn-GMPNS) demonstrated superior thermal stability, acid-base resistance, salt tolerance, reusability, and substrate universality. Benefiting from the high catalytic activity of Mn-GMPNS, epinephrine, a significant neurotransmitter and hormone associated with numerous diseases, was visually detected within 10 min and a portable assay by smartphone. More encouragingly, Mn-GMPNS can efficiently degrade dye pollutants, achieving a decolorization rate over 70% within 30 min. Thus, the coordination between manganese ion and nucleotide demonstrated the potential in rational design of nanozymes with high catalytic activity, low cost, good stability, and good biocompatibility.

Boosting the LAC-like activity of tetrapeptide capped copper nanoparticle-based nanozymes for colorimetric determination of adrenaline

Enzymatic activity is important for a variety of technological applications, but the limited stability and complex structures of enzymes often limit their use. Therefore, designing powerful nanomaterial catalysts that are more stable and have higher catalytic activity than natural catalysts has been the pursuit of biotechnology. Here, inspired by electron transfer and the active site of laccase (LAC), four types of copper particles with LAC-like activity were synthesized using a simple hydrothermal method. Copper particles coated with the L-phenylalanine (F)-L-phenylalanine (F)-L-cysteine (C)-L-histidine (H) tetrapeptide exhibited higher LAC-like activity compared to those coated with a CH dipeptide, C, and H. This enhancement could be attributed to the higher structural homology and amino acid composition similarity with the natural LAC active center. The FFCH@CuNP nanozyme was employed for adrenaline detection, and it demonstrated outstanding activity, stability, and recyclability. Additionally, a method for the quantitative detection of adrenaline was established using a smartphone based on the FFCH@CuNP nanozymes. And the FFCH@CuNPs exhibited excellent sensitivity and specificity to adrenaline in a saliva-based test. Therefore, this work provides a reasonable pathway for the design of catalysts for future biotechnological and industrial applications.

Chiral Cux Coy S-Cuz S Nanoflowers with Bioinspired Enantioselective Catalytic Performances

Nanomaterials with biomimetic catalytic abilities have attracted significant attention. However, the stereoselectivity of natural enzymes determined by their unique configurations is difficult to imitate. In this work, a kind of chiral Cux Coy S-Cuz S nanoflowers (L/D-Pen-NFs) is developed, using porous Cux Coy S nanoparticles (NPs) as stamens, Cuz S sheets as petals, and chiral penicillamine as surface stabilizers. Compared to the natural laccase enzyme, L/D-Pen-NFs exhibit significant advantages in catalytic efficiency, stability against harsh environments, recyclability, and convenience in construction. Most importantly, they display high enantioselectivity toward chiral neurotransmitters, which is proved by L- and D-Pen-NFs' different catalytic efficiencies toward chiral enantiomers. L-Pen-NFs are more efficient in catalyzing the oxidation of L-epinephrine and L-dopamine compared with D-Pen-NFs. However, their catalytic efficiency in oxidizing L-norepinephrine and L-DOPA is lower than that of D-Pen-NFs. The reason for the difference in catalytic efficiency is the distinct binding affinities between Cux Coy S-Cuz S nano-enantiomers and chiral molecules. This work can spur the development of chiral nanostructures with biomimetic functions.

Nanozyme as detector and remediator to environmental pollutants: between current situation and future prospective

The term "nanozyme" refers to a nanomaterial possessing enzymatic capabilities, and in recent years, the field of nanozymes has experienced rapid advancement. Nanozymes offer distinct advantages over natural enzymes, including ease of production, cost-effectiveness, prolonged storage capabilities, and exceptional environmental stability. In this review, we provide a concise overview of various common applications of nanozymes, encompassing the detection and removal of pollutants such as pathogens, toxic ions, pesticides, phenols, organic contaminants, air pollution, and antibiotic residues. Furthermore, our focus is directed towards the potential challenges and future developments within the realm of nanozymes. The burgeoning applications of nanozymes in bioscience and technology have kindled significant interest in research in this domain, and it is anticipated that nanozymes will soon become a topic of explosive discussion.

Metal-organic frameworks for enzyme immobilization and nanozymes: A laccase-focused review

Laccases are natural catalysts with remarkable catalytic activity. However, their application is limited by their lack of stability. Metal-organic frameworks (MOFs) have emerged as a promising alternative for enzyme immobilization. Enzymes can be immobilized in MOFs via two approaches: postsynthetic immobilization and in situ immobilization. In postsynthetic immobilization, an enzyme is embedded after MOF formation by covalent interactions or adsorption. In contrast, in in situ immobilization, a MOF is formed in the presence of an enzyme. Additionally, MOFs have exhibited intrinsic enzyme-like activity. These materials, known as nanozymes when they have the ability to replace enzymes in certain catalytic processes, have multiple key advantages, such as low cost, easy preparation, and large surface areas. This review presents a general overview of the most recent advances in both enzyme@MOF biocatalysts and MOF-based nanozymes in different applications, with a focus on laccase, which is one of the most widely investigated enzymes with excellent industrial potential.

Selective sensing of catechol based on a fluorescent nanozyme with catechol oxidase activity

Nanozymes, an unusual category of nanomaterials possessing enzymatic properties, and have generated considerable interest regarding their application feasibilities on several important fronts. In the present work, an innovative sensing device for catechol was established ground on a fluorescent nanozyme (Cu-BDC-NH2) that exhibited catechol oxidase activity. The fluorescent nanozyme combines both functions of catechol recognition and response signal output, and can realize the sensing of catechol without the addition of other chromogenic agents. In the existence of Cu-BDC-NH2, catechol can be oxidized efficiently to produce quinones or polymers with strong electron absorption capacity, which immediately results in efficient fluorescence quenching of Cu-BDC-NH2. However, other common phenolic compounds, such as phenol, the other two diphenols (hydroquinone and resorcinol), phloroglucinol, and chlorophenol, do not result in efficient fluorescence quenching of Cu-BDC-NH2. The method shows a nice linear relationship between catechol concentration prep the fluorescence intensity of Cu-BDC-NH2 in the scope of 0-10 μM, with a detection limit of 0.997 μM. The detection of catechol in actual water samples has also achieved the satisfactory consequences, which provides a new strategy for the convenient and selective detection of catechol.

Bacterial Nanocellulose/Copper as a Robust Laccase-Mimicking Bionanozyme for Catalytic Oxidation of Phenolic Pollutants

Industrial effluents containing phenolic compounds are a major public health concern and thus require effective and robust remediation technologies. Although laccase-like nanozymes are generally recognized as being catalytically efficient in oxidizing phenols, their support materials often lack resilience in harsh environments. Herein, bacterial nanocellulose (BNC) was introduced as a sustainable, strong, biocompatible, and environmentally friendly biopolymer for the synthesis of a laccase-like nanozyme (BNC/Cu). A native bacterial strain that produces nanocellulose was isolated from black tea broth fermented for 1 month. The isolate that produced BNC was identified as Bacillus sp. strain T15, and it can metabolize hexoses, sucrose, and less expensive substrates, such as molasses. Further, BNC/Cu nanozyme was synthesized using the in situ reduction of copper on the BNC. Characterization of the nanozyme by scanning electron microscopy (SEM) and X-ray diffraction (XRD) confirmed the presence of the copper nanoparticles dispersed in the layered sheets of BNC. The laccase-mimetic activity was assessed using the chromogenic redox reaction between 2,4-dichlorophenol (2,4-DP) and 4-aminoantipyrine (4-AP) with characteristic absorption at 510 nm. Remarkably, BNC/Cu has 50.69% higher catalytic activity than the pristine Cu NPs, indicating that BNC served as an effective biomatrix to disperse Cu NPs. Also, the bionanozyme showed the highest specificity toward 2,4-DP with a Km of 0.187 mM, which was lower than that of natural laccase. The bionanozyme retained catalytic activity across a wider temperature range with optimum activity at 85 °C, maintaining 38% laccase activity after 11 days and 46.77% activity after the fourth cycle. The BNC/Cu bionanozyme could efficiently oxidize more than 70% of 1,4-dichlorophenol and phenol in 5 h. Thereby, the BNC/Cu bionanozyme is described here as having an efficient ability to mimic laccase in the oxidation of phenolic compounds that are commonly released into the environment by industry.

Copper nanoparticles embedded fungal chitosan as a rational and sustainable bionanozyme with robust laccase activity for catalytic oxidation of phenolic pollutants

Despite their potential for oxidation of persistent environmental pollutants, the development of rational and sustainable laccase nanozymes with efficient catalytic performance remains a challenge. Herein, fungal-produced chitosan-copper (CsCu) is proposed as a rational and sustainable bionanozyme with intrinsic laccase activity. The CsCu nanozyme was prepared by in situ reduction of copper on chitosan extracted from Irpex sp. isolate AWK2 a native fungus, from traditional fermented foods, yielding a low molecular weight chitosan with a 70% degree of deacetylation. Characterizations of the nanozyme using SEM-EDX, XRD, and XPS confirmed the presence of a multi-oxidation state copper on the chitosan matrix which is consistent with the composition of natural laccase. The laccase memetic activity was investigated using 2,4-DP as a substrate which oxidized to form a reddish-pink color with 4-AP (λmax = 510 nm). The CsCu nanozyme showed 38% higher laccase activity than the pristine Cu NPs at pH 9, indicating enhanced activity in the presence of chitosan structure. Further, CsCu showed significant stability in harsh conditions and exhibited a lower Km (0.26 mM) which is competitive with that reported for natural laccase. Notably, the nanozyme converted 92% of different phenolic substrates in 5 h, signifying a robust performance for environmental remediation purposes.

Adenine phosphate-Cu nanozyme with multienzyme mimicking activity for efficient degrading phenolic compounds and detection of hydrogen peroxide, epinephrine and glutathione

BACKGROUND

With the development of nanotechnology, various nanomaterials with enzyme-like activity (nanozymes) have been reported. Due to their superior properties, nanozymes have shown important application potential in the fields of bioanalysis, disease detection, and environmental remediation. However, only a few nanomaterials with multi-enzyme mimicry activity have been reported. In this study, a novel multienzyme mimic was synthesized through a simple and rapid preparation protocol by coordinating copper ions with N3, N6 (amino), N7, and N9 on adenine phosphate.

RESULTS

The prepared adenine phosphate-Cu complex exhibits significant peroxidase, laccase, and oxidase mimicking activities. The Michaelis-Menten constant (Km) and the maximal velocity (Vmax) values of the peroxidase, laccase, and oxidase mimicking activities of AP-Cu nanozyme are 0.052 mM, 0.14 mM, and 2.49 mM; and 0.552 μM min-1, 6.70 μM min-1, and 2.24 μM min-1, respectively. Then, based on its laccase mimicking activity, the nanozyme was applied in the degradation of phenolic compounds. The calculated kinetic constant for the degradation of 2,4-dichlorophenol is 0.468 min-1 and the degradation efficiency of 2,4-dichlorophenol (0.1 mM) reaches 96.14% at 7 min. Finally, based on the multienzyme mimicking activity of adenine phosphate-Cu nanozyme, simple colorimetric sensing methods with high sensitivity and good selectivity were developed for the detection of hydrogen peroxide, epinephrine, and glutathione in the ranges of 20.0-200.0 μM (R2 = 0.9951), 5.0-100.0 μM (R2 = 0.9970), and 5.0-200.0 μM (R2 = 0.9924) with the limits of quantitation of 20.0 μM, 5.0 μM, and 5.0 μM, respectively.

SIGNIFICANCE

In short, the synthesis of nanozymes with multi-enzyme mimicry activity through coordination between copper ions and small molecule mimicry enzymes provides new ideas for the design and research of multi-enzyme mimics.

Light-gated specific oxidase-like activity of a self-assembled Pt(II) nanozyme for environmental remediation

Artificial enzyme equivalents, also known as nanozymes, are a practical tool for environmental remediation when compared to their natural counterparts due to their high operational stability, efficiency, and cost-effectiveness. Specific oxidase mimicking nanozymes are well suited to degrade toxic chemicals from industrial waste such as phenols and azo dyes. Therefore, photocatalytic nanozymes using visible/sunlight would provide a viable strategy for sustainable environmental remediation. Herein, we introduce an aggregation-induced emissive Pt(II) complex, which self-assembles in water providing NanoPtA nanotapes. These structures exhibit a specific oxidase-like nanozyme activity driven by light. The NanoPtA structure assists in the photogeneration of singlet oxygen in water via a triplet excited 3MMLCT state, leading to a specific oxidase-like activity instead of a peroxidase-like activity. The self-assembled nanozyme showed great stability under harsh environmental conditions and exhibited photo-induced specific oxidase-mimetic activity, which was considerably more efficient than the natural enzyme or other specific nanozymes. We demonstrated efficient NanoPtA-induced photocatalytic degradation of various phenolic compounds and azo dyes within 5-10 minutes of light irradiation. Notably, the system operates under sunlight and exhibits reusability over twenty cycles of catalytic reactions. Another fascinating aspect of NanoPtA is the unaltered catalytic performance for more than 75 days, providing a robust enzyme-equivalent for practical sustainable environmental remediation.

Valence-Engineered Oxidase-Mimicking Nanozyme with Specificity for Aromatic Amine Oxidation and Identification

Oxidase-mimicking nanozymes with specificity for catalyzing oxidation of aromatic amines are of great significance for recognition of aromatic amines but rarely reported. Herein, Cu-A nanozyme (synthesized with Cu²⁺ as a node and adenine as a linker) could specifically catalyze oxidation of o-phenylenediamine (OPD) in Britton-Robinson buffer solution. Such a specific catalytic performance was also corroborated with other aromatic amines, such as p-phenylenediamine (PPD), 1,5-naphthalene diamine (1,5-NDA), 1,8-naphthalene diamine (1,8-NDA), and 2-aminoanthracene (2-AA). Moreover, the presence of salts (1 mM NaNO₂, NaHCO₃, NH₄Cl, KCl, NaCl, NaBr, and NaI) greatly mediated the catalytic activity with the order of NaNO₂ < blank ≈ NaHCO₃ < NH₄Cl ≈ KCl ≈ NaCl < NaBr < NaI, which was due to anions sequentially increasing interfacial Cu⁺ content via anionic redox reaction, while the effect of cations was negligible. With the increased Cu⁺ content, K_m decreased and V_max increased, indicating valence-engineered catalytic activity. Based on high specificity and satisfactory activity, a colorimetric sensor array with NaCl, NaBr, and NaI as sensing channels was constructed to identify five representative aromatic amines (OPD, PPD, 1,5-NDA, 1,8-NDA, and 2-AA) as low as 50 μM, quantitatively analyze single aromatic amine (with OPD and PPD as model analysts), and even identify 20 unknown samples with an accuracy of 100%. In addition, the performance was further validated through accurately recognizing various concentration ratios of binary, ternary, quaternary, and quinary mixtures. Finally, the practical applications were demonstrated by successfully discriminating five aromatic amines in tap, river, sewage, and sea water, providing a simple and feasible assay for large-scale scanning aromatic amine levels in environmental water samples.

One stone, two birds: A Cu-S cluster as a laccase-mimicking nanozyme and sulfite activator for phenol remediation in marine environments

Phenols are infamous pollutants in marine environments and present a grave danger to human health, which makes their efficient detection and removal serious issues. Colorimetry is a simple method for detecting phenols in water because phenols can be oxidized by natural laccase and generate a brown product. However, high cost and poor stability impede the wide-spread implementation of natural laccase in phenol detection. To reverse this adverse situation, a nanoscale Cu-S cluster, Cu₄(MPPM)₄ (Cu₄S₄, MPPM = 2-mercapto-5-n-propylpyrimidine), is synthesized. As a stable and inexpensive nanozyme, Cu₄S₄ shows excellent laccase-mimicking activity and prompts the oxidation of phenols. This characteristic makes Cu₄S₄ a perfect option for phenol detection with colorimetry. In addition, Cu₄S₄ also exhibits sulfite activation properties. It can degrade phenols and other pollutants with advanced oxidation processes (AOPs). Theoretical calculations show good laccase-mimicking and sulfite activation properties originating from appropriate interactions between Cu₄S₄ and substrates. We anticipate that the phenol detection and degradation characteristics of Cu₄S₄ make it a promising material to be used for practical phenol remediation in water environments.

Nanozymes and nanoflower: Physiochemical properties, mechanism and biomedical applications

Natural enzymes possess several drawbacks which limits their application in industries, wastewater remediation and biomedical field. Therefore, in recent years researchers have developed enzyme mimicking nanomaterials and enzymatic hybrid nanoflower which are alternatives of enzyme. Nanozymes and organic inorganic hybrid nanoflower have been developed which mimics natural enzymes functionalities such as diverse enzyme mimicking activities, enhanced catalytic activities, low cost, ease of preparation, stability and biocompatibility. Nanozymes include metal and metal oxide nanoparticles mimicking oxidases, peroxidases, superoxide dismutase and catalases while enzymatic and non-enzymatic biomolecules were used for preparing hybrid nanoflower. In this review nanozymes and hybrid nanoflower have been compared in terms of physiochemical properties, common synthetic routes, mechanism of action, modification, green synthesis and application in the field of disease diagnosis, imaging, environmental remediation and disease treatment. We also address the current challenges facing nanozyme and hybrid nanoflower research and the possible way to fulfil their potential in future.

Application of Nanozymes in Environmental Monitoring, Management, and Protection

Nanozymes are nanomaterials with enzyme-like activity, possessing the unique properties of nanomaterials and natural enzyme-like catalytic functions. Nanozymes are catalytically active, stable, tunable, recyclable, and versatile. Therefore, increasing attention has been paid in the fields of environmental science and life sciences. In this review, we focused on the most recent applications of nanozymes for environmental monitoring, environmental management, and environmental protection. We firstly introduce the tuning catalytic activity of nanozymes according to some crucial factors such as size and shape, composition and doping, and surface coating. Then, the application of nanozymes in environmental fields are introduced in detail. Nanozymes can not only be used to detect inorganic ions, molecules, organics, and foodborne pathogenic bacteria but are also involved in the degradation of phenolic compounds, dyes, and antibiotics. The capability of nanozymes was also reported for assisting air purification, constructing biofuel cells, and application in marine antibacterial fouling removal. Finally, the current challenges and future trends of nanozymes toward environmental fields are proposed and discussed.

A Cu(II) MOF with laccase-like activity for colorimetric detection of 2,4-dichlorophenol and p-nitrophenol

Metal-organic framework (MOF) materials with aqueous stability have a good potential application in the field of mimetic enzymes. However, most of them have poor robustness in aqueous solution due to competitive coordination effects between water molecules and central metal ions. Herein, a copper-based MOF (Cu-SM MOF) was prepared using copper ions and 5-(sulfomethyl) isophthalic acid (5-SMIPA) by a hydrothermal process. Considering the similarity of coordination and morphology with HKUST-1, the aqueous stability and laccase-like activity of the Cu-SM MOF were investigated using HKUST-1 as the reference. The Cu-SM MOF shows superior aqueous stability to HKUST-1 after immersion in buffer solutions, especially under alkaline conditions. Moreover, the Cu-SM MOF possesses higher catalytic activity than HKUST-1 at a high salt concentration, high temperature, etc., because the Cu-SM MOF exhibits lower K_m and higher V_max values than those of laccase and reported mimetic enzymes. The mimetic enzyme behavior of the Cu-SM MOF is demonstrated in the oxidation of phenols, as well as in the detection of 2,4-dichlorophenol (2,4-DP) and p-nitrophenol with linear ranges of 1-100 μM and 2-250 μM, and limits of detection of 0.53 μM and 1.62 μM, respectively. Owing to the excellent aqueous stability and laccase-like activity of the Cu-SM MOF, it has great application prospects in many fields, such as the determination of phenols and the treatment of industrial wastewater.

Supramolecular assembly of benzophenone alanine and copper presents high laccase-like activity for the degradation of phenolic pollutants

Laccases are multicopper oxidases of significant importance for the degradation of phenolic pollutants. Because of the inherent defects of natural laccases in practical applications, herein, we discovered highly effective and non-cytotoxic laccase-like metallo-nanofibers based on the supramolecular assembly of single unnatural amino acid, benzophenone-alanine (BpA), in combination with copper ions. Structural analysis revealed that the catalytic BpA-Cu nanofibers possess a Cu(I)-Cu(II) electron transfer system similar to that in natural laccase. Our BpA-Cu nanofibers exhibit 4 times higher substrate affinity and 24% higher catalytic efficiency than the well-known high-performance industrialized laccase (Novozym 51003) in 2,4-dichlorophenol degradation. In addition, the BpA-Cu nanofibers were demonstrated to be stable (&gt;75% residual activity) in long-term storage at a wide range of pH, ionic strength, temperature, ethanol, and water sample, and to be readily recovered for pollutant degradation, keeping 83% of the laccase activity after 10 catalytic recycles. Remarkably, the nanofibers displayed a wide substrate spectrum, detecting and degrading a variety of phenolic pollutants with high activity than other laccase mimics reported in the literature. Furthermore, the biocompatibility of the material was proved with cultured cells. These findings demonstrated the potential of BpA-Cu nanofibers in mimicking laccases for environmental remediation.

Supramolecular enzyme-mimicking catalysts self-assembled from peptides

Natural enzymes catalyze biochemical transformations in superior catalytic efficiency and remarkable substrate specificity. The excellent catalytic repertoire of enzymes is attributed to the sophisticated chemical structures of their active sites, as a result of billions-of-years natural evolution. However, large-scale practical applications of natural enzymes are restricted due to their poor stability, difficulty in modification, and high costs of production. One viable solution is to fabricate supramolecular catalysts with enzyme-mimetic active sites. In this review, we introduce the principles and strategies of designing peptide-based artificial enzymes which display catalytic activities similar to those of natural enzymes, such as aldolases, laccases, peroxidases, and hydrolases (mainly the esterases and phosphatases). We also discuss some multifunctional enzyme-mimicking systems which are capable of catalyzing orthogonal or cascade reactions. We highlight the relationship between structures of enzyme-like active sites and the catalytic properties, as well as the significance of these studies from an evolutionary point of view.

Colorimetric assay of phosphate using a multicopper laccase-like nanozyme

A new nanozyme (Cu-NADH) is reported composed of Cu-coordinated nicotinamide adenine dinucleotide (NADH) exhibiting laccase-like activity. The Cu-NADH nanozyme had higher heat tolerance and catalytic efficiency than natural laccase, and its catalytic activity can be enhanced by high concentration of Cl ions and it is intensely inhibited by phosphate. Therefore, a colorimetric method based on Cu-NADH and indigo carmine was successfully developed to detect phosphate in water. This method showed an excellent selectivity for phosphate, and it had a linear relationship in the phosphate concentration range 2-50 μM with a detection limit of 0.37 μM. We believe that this example of coordination between metal ions and biomolecules to mimic natural enzymes can inspire more effective and alternative strategies in nanozyme design and expand their use in sensing and determination.

Laccase-mimicking Mn-Cu hybrid nanoflowers for paper-based visual detection of phenolic neurotransmitters and rapid degradation of dyes

Background

Laccase-based biosensors are efficient for detecting phenolic compounds. However, the instability and high cost of laccases have hindered their practical utilization.

Results

In this study, we developed hierarchical manganese dioxide–copper phosphate hybrid nanoflowers (H–Mn–Cu NFs) as excellent laccase-mimicking nanozymes. To synthesize the H–Mn–Cu NFs, manganese dioxide nanoflowers (MnO₂ NFs) were first synthesized by rapidly reducing potassium permanganate using citric acid. The MnO₂ NFs were then functionalized with amine groups, followed by incubation with copper sulfate for three days at room temperature to drive the coordination interaction between the amine moieties and copper ions and to induce anisotropic growth of the petals composed of copper phosphate crystals, consequently yielding H–Mn–Cu NFs. Compared with those of free laccase, at the same mass concentration, H–Mn–Cu NFs exhibited lower K_m (~ 85%) and considerably higher V_max (~ 400%), as well as significantly enhanced stability in the ranges of pH, temperature, ionic strength, and incubation periods evaluated. H–Mn–Cu NFs also catalyzed the decolorization of diverse dyes considerably faster than the free laccase. Based on these advantageous features, a paper microfluidic device incorporating H–Mn–Cu NFs was constructed for the convenient visual detection of phenolic neurotransmitters, including dopamine and epinephrine. The device enabled rapid and sensitive quantification of target neurotransmitters using an image acquired using a smartphone.

Conclusions

These results clearly show that H–Mn–Cu NFs could be potential candidates to replace natural laccases for a wide range of applications in biosensing, environmental protection, and biotechnology.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01560-0.

Bioremoval of estrogens by laccase immobilized onto polyacrylonitrile/polyethersulfone material: Effect of inhibitors and mediators, process characterization and catalytic pathways determination

The presence of micropollutants in water, wastewater and soil are a global problem due to their persistent effect on ecosystems and human health. Although there are many methods of removal of environmental pollutants, they are often ineffective for degradation of pharmaceuticals, including estrogens. In presented work we proposed fabrication of electrospun material from polyacrylonitrile/polyethersulfone (PAN/PES) as a support for laccase immobilization by covalent binding. Oxidoreductase was attached to the electrospun fibers using polydopamine as a linker and produced system was used for degradation of two estrogens: 17β-estradiol (E2) and 17α-ethynylestradiol (EE2). It was shown that 92% of E2 and 100% of EE2 were degraded after 24 h of the process. Moreover, the effect of surfactants, metal ions and mediators on conversion efficiencies of estrogens was investigated and it was confirmed that immobilized enzyme possessed higher resistance to inhibitory agents as well as thermal and storage stability, compared to its native form. Finally, estrogenic activities of E2 and EE2 solutions decreased around 99% and 87%, respectively, after enzymatic conversion, that corresponds to significant reduction of the total organic carbon and formation of low-toxic final products of estrogens degradation.

Systems chemistry of peptide-assemblies for biochemical transformations

During the billions of years of the evolutionary journey, primitive polymers, involved in proto metabolic pathways with low catalytic activity, played critical roles in the emergence of modern enzymes with remarkable substrate specificity. The precise positioning of amino acid residues and the complex orchestrated interplay in the binding pockets of evolved enzymes promote covalent and non-covalent interactions to foster a diverse set of complex catalytic transformations. Recent efforts to emulate the structural and functional information of extant enzymes by minimal peptide based assemblies have attempted to provide a holistic approach that could help in discerning the prebiotic origins of catalytically active binding pockets of advanced proteins. In addition to the impressive sets of advanced biochemical transformations, catalytic promiscuity and cascade catalysis by such small molecule based dynamic systems can foreshadow the ancestral catalytic processes required for the onset of protometabolism. Looking beyond minimal systems that work close to equilibrium, catalytic systems and compartments under non-equilibrium conditions utilizing simple prebiotically relevant precursors have attempted to shed light on how bioenergetics played an essential role in chemical emergence of complex behaviour. Herein, we map out these recent works and progress where diverse sets of complex enzymatic transformations were demonstrated by utilizing minimal peptide based self-assembled systems. Further, we have attempted to cover the examples of peptide assemblies that could feature promiscuous activity and promote complex multistep cascade reaction networks. The review also covers a few recent examples of minimal transient catalytic assemblies under non-equilibrium conditions. This review attempts to provide a broad perspective for potentially programming functionality via rational selection of amino acid sequences leading towards minimal catalytic systems that resemble the traits of contemporary enzymes.

Degradation and Detection of Endocrine Disruptors by Laccase-Mimetic Polyoxometalates

Endocrine disruptors are newly identified water contaminants and immediately caught worldwide concern. An effort has been made to degrade endocrine disruptors in the water body by relying on laccase-assisted approaches, including laccase-mediated catalytic systems, immobilized laccase catalytic systems, and nano-catalytic systems based on atypical protein enzymes. Analogous to laccases, polyoxometalates (POMs) have a similar size as these enzymes. They are also capable of using oxygen as an electron acceptor, which could assist the removal of endocrine disruptors in water. This perspective begins with a brief introduction to endocrine disruptors and laccases, summarizes current approaches employing laccases, and focuses on the nano-catalytic systems that mimic the function of laccases. Among the inorganic nanoparticles, POMs meet the design requirements and are easy for large-scale production. The catalytic performance of POMs in water treatment is highlighted, and an example of using polyoxovanadates for endocrine disruptor degradation is given at the end of this perspective. Exploring laccase-mimetic POMs will give key insights into the degradation of emergent water contaminants.

Supramolecule self-assembly synthesis of amyloid phenylalanine-Cu fibrils with laccase-like activity and their application for dopamine determination

Laccases are multicopper proteins for dioxygen-involved oxidation of a broad spectrum of organic compounds. I Novel amyloid-like phenylalanine-Cu (F-Cu(II)) fibrils were developed, which were obtained via supramolecular self-assembly of Cu²⁺ and phenylalanine (F) under basic condition. The obtained amyloid-like fibrils represented highly periodic structure, of which the lattice unit was constructed via alternating hydrophobic (aromatic environment) and hydrophilic (both hydrogen bonding and Cu(II) coordination) interactions. Relative to natural laccases, the amyloid-like F-Cu(II) architecture exhibited comparable substrate affinity (Michaelis constant, K_m = 0.75 mM) and higher catalytic efficiency (k_cat/K_m = 773.33 × 10^-3 g^-1 min^-1L). Moreover, it exhibited remarkable tolerances in pH (4 ~ 10), temperature (room temperature ~ 200 ℃), organic solvent, and long-term storage (> 15 days). These stabilities were superior among the reported nature and artificial laccases, presenting a more promising candidate in various chemo- or bio-applications. In addition, F-Cu(II) fibrils could catalyze the oxidation of dopamine (DA) to a brown product, in which a new absorption band at 470 nm was observed. Based on this, a simple colorimetric assay for the detection of DA could be performed. We reported a novel amyloid-like phenylalanine-Cu fibrils, in which F-Cu⁺ complex can mimick the T1 site of natural laccase to oxidize the substrates. Then electrons transferred to F-Cu²⁺ complex via N-H···O=C hydrogen binding pathway. Finally, the dioxygen was transformed to water though radical reaction.

CuCoFe Layered double hydroxides as laccase mimicking nanozymes for colorimetric detection of pheochromocytoma biomarkers

A laccase catalyzed colorimetric biosensing approach is promising for the detection of pheochromocytoma biomarkers, yet suffers from the poor stability of enzymes and high cost for production. Here we report for the first time an easy to produce, cheap, stable and reliable laccase-mimicking CuCoFe-LDHzyme, which can catalyze the oxidation of pheochromocytoma biomarkers to form a chromogenic product for smartphone-based colorimetric detection.

Current research progress on laccase-like nanomaterials

The first systematic review of the progress of research on the types and applications of laccase-like activity of nanomaterials is reported.

Nanobiotechnological advancements in agriculture and food industry: Applications, nanotoxicity, and future perspectives

The high demand for sufficient and safe food, and continuous damage of environment by conventional agriculture are major challenges facing the globe. The necessity of smart alternatives and more sustainable practices in food production is crucial to confront the steady increase in human population and careless depletion of global resources. Nanotechnology implementation in agriculture offers smart delivery systems of nutrients, pesticides, and genetic materials for enhanced soil fertility and protection, along with improved traits for better stress tolerance. Additionally, nano-based sensors are the ideal approach towards precision farming for monitoring all factors that impact on agricultural productivity. Furthermore, nanotechnology can play a significant role in post-harvest food processing and packaging to reduce food contamination and wastage. In this review, nanotechnology applications in the agriculture and food sector are reviewed. Implementations of nanotechnology in agriculture have included nano- remediation of wastewater for land irrigation, nanofertilizers, nanopesticides, and nanosensors, while the beneficial effects of nanomaterials (NMs) in promoting genetic traits, germination, and stress tolerance of plants are discussed. Furthermore, the article highlights the efficiency of nanoparticles (NPs) and nanozymes in food processing and packaging. To this end, the potential risks and impacts of NMs on soil, plants, and human tissues and organs are emphasized in order to unravel the complex bio-nano interactions. Finally, the strengths, weaknesses, opportunities, and threats of nanotechnology are evaluated and discussed to provide a broad and clear view of the nanotechnology potentials, as well as future directions for nano-based agri-food applications towards sustainability.

Research Progress and Prospects of Nanozyme-Based Glucose Biofuel Cells

The appearance and evolution of biofuel cells can be categorized into three groups: microbial biofuel cells (MBFCs), enzymatic biofuel cells (EBFCs), and enzyme-like nanomaterial (nanozyme)-based biofuel cells (NBFCs). MBFCs can produce electricity from waste; however, they have significantly low power output as well as difficulty in controlling electron transfer and microbial growth. EBFCs are more productive in generating electricity with the assistance of natural enzymes, but their vulnerability under diverse environmental conditions has critically hindered practical applications. In contrast, because of the intrinsic advantages of nanozymes, such as high stability and robustness even in harsh conditions, low synthesis cost through facile scale-up, and tunable catalytic activity, NBFCs have attracted attention, particularly for developing wearable and implantable devices to generate electricity from glucose in the physiological fluids of plants, animals, and humans. In this review, recent studies on NBFCs, including the synthetic strategies and catalytic activities of metal and metal oxide-based nanozymes, the mechanism of electricity generation from glucose, and representative studies are reviewed and discussed. Current challenges and prospects for the utilization of nanozymes in glucose biofuel cells are also discussed.