Efficient tuning of zinc phthalocyanine-based dyes for dye-sensitized solar cells: a detailed DFT study

Unveiling next-generation organic photovoltaics: Quantum mechanical insights into non-fullerene donor-acceptor compounds

Organic photovoltaics (OPVs) have improved greatly in recent years in pursuit for efficient and sustainable energy conversion methods. Specifically, utilizing quantum chemistry approaches such as density functional theory (DFT), the electronic structures, energy levels, and charge transport characteristics of donor-π-acceptor (D-π-A) systems based on non-fullerene donor and acceptor molecules have been examined and synthesized. Non-fullerene acceptors offer several advantages over traditional fullerene-based materials, such as enhanced light absorption, modifiable energy levels, and reduced recombination losses. Quantum mechanical simulations are helpful in the design and development of these materials because they can accurately predict the energy level alignment, molecule interactions, and charge transport properties needed for the high-efficiency of OPVs. The research begins through the selection of electron-donating and electron-accepting non-fullerene polymeric molecules using the unique properties of non-fullerene derivatives and non-fullerene acceptors. The theory uses the B3LYP-D3 method with a 6-31+G (d,p) basis set. PY-IT is used as the reference molecule, and eight molecules PY-IT01-PY-IT08, has been created by changing the end caps of the acceptor units. The created compound has superior photovoltaic characteristics. Focus has been specifically given to the frontier molecular orbitals (FMOs), natural bond order (NBO) analysis, reorganization energies (RE), and absorption spectra in order to assess the viability of charge separation and efficient light absorption. Finally, the molecular electrostatic potential (MEP) analysis, transition density matrix (TDM) analysis, and improved open circuit voltage (Voc) all have been computed. The results of the findings provide new insight to design organic solar cells (OSCs) with improved photovoltaic and solar energy conversion capabilities, which has great potential for the future development of more dependable and efficient OSCs.

Understanding the nature of the adsorption of Zn(II)/Si(IV) phthalocyanines on anatase TiO2 and rutile SnO2

CONTEXT

The zinc (II) and silicon (IV) phthalocyanine adsorption on a TiO2 and SnO2 semiconductor surface was investigated using the density functional theory. Several effects were studied: the semiconductor (TiO2, SnO2), the central metal atom in the phthalocyanine (Zn, Si), the substituent groups in the phthalocyanine, and the anchor group (anhydrous, carboxyl) connecting the phthalocyanine with the semiconductor. The application of methodologies to study the intermolecular interactions predicted a stronger zinc and silicon phthalocyanine adsorption with carboxyl than anhydrous. Adsorption energies for phthalocyanines anchored by a carboxyl group indicate a stronger adsorption for TiO2 than for SnO2 with energy differences of up to 7 eV. The presence of coordinative and more van der Waals interactions in TiO2 can explain this. This work is carried out to understand the interaction between phthalocyanines and the semiconductor surface, a crucial aspect of the efficient performance of solar cells.

METHODS

We modeled two semiconductor surfaces in extended configuration (TiO2 and SnO2), which were optimized with the GGA-PBE exchange-correlation functional for solids, including the Grimme's correction dispersion (D3). The meta-GGA TB09LDA exchange-correlation functional was employed to calculate the band gap energy of the semiconductors. The adsorption energies of the phthalocyanines adsorbed on the semiconductors were determined with GGA-PBE-D3 and corrected by the counterpoise method. The nature of the intermolecular interactions in the adsorption was analyzed using the non-covalent interactions (NCI) based on the promolecular approximation of electron density. These interactions were quantifiable by employing the intrinsic bond strength index (IBSI). We used the QuantumATK and the Multiwfn packages for all the calculations.

Tuning optoelectronic properties of indandione-based D-A materials by malononitrile group acceptors: A DFT and TD-DFT approach

CONTEXT

Indandione-based materials are promising candidates for organic electronics, offering high electron mobility and tunable optoelectronic properties. In this study, we explore the optoelectronic and photovoltaic properties of indandione-based donor-acceptor (D-A) materials, specifically (R1) and (R2), by introducing malononitrile group acceptors into their molecular structure. These strong electron-withdrawing acceptors are designed to enhance charge transfer and overall material performance. The designed molecules (DM1-DM4) exhibit a low optical band gap of approximately 1.77 eV, significantly lower than the reference materials (R1 and R2) at around 2.24 eV in a solvent environment. Among the designed molecules, DM4 stands out with superior photovoltaic parameters, including a narrow optical band gap (1.77 eV), higher electron affinity (3.49 eV), an extended excited state lifetime (10.0 ns) owing to its low electron and hole reorganization energies (λe ~ 0.13 eV and λh ~ 0.24 eV), and improved short-circuit current density (Jsc) of ~ 15.73 mA/cm2. Notably, DM4 achieves a power conversion efficiency (PCE) of ~ 18.5%, making it an excellent candidate for device applications.

METHOD

A comprehensive computational investigation was carried out on indandione-based D-A materials with malononitrile group acceptors (DM1-DM4) using density functional theory (DFT) and time-dependent DFT (TD-DFT) methods, as implemented in Gaussian 16 software. We examined the electronic and optical properties of the proposed molecules through frontier molecular orbital (FMO) analysis, UV-Vis absorption spectra, density of states (DOS), exciton binding energy (Eb), and transition density matrix (TDM) analysis, utilizing GaussView 6.0 and Multiwfn 3.8 software. The photovoltaic parameters and power conversion efficiency (PCE) were evaluated using the Scharber and Alharbi models.

A theoretical investigation for improving the performance of non-fullerene organic solar cells through side-chain engineering of BTR non-fused-ring electron acceptors

In the current quantum chemical study, indacenodithiophene donor core-based the end-capped alterations of the reference chromophore BTR drafted eight A2-A1-D-A1-A2 type small non-fullerene acceptors. All the computational simulations were executed under MPW1PW91/6-31G (d, p) level of DFT. The UV-Vis absorption, open circuit voltage, electron affinity, ionization potential, the density of states, reorganization energy, orbital analysis, and non-covalent interactions were studied and compared with BTR. Several molecules of our modeled series BT1-BT8 have shown distinctive features that are better than those of the BTR. The open circuit voltage (VOC) of BT5 has a favorable impact, allowing it to replace BTR in the field of organic solar cells. The charge carrier motilities for proposed molecules generated extraordinary findings when matched to the reference one (BTR). Further charge transmission was confirmed by creating the complex with a PM6 donor molecule. The remarkable dipole moment contributes to the formation of non-covalent bond interactions with chloroform, resulting in superior charge mobility. Based on these findings, it can be said that every tailored molecule has the potential to surpass chromophore molecule (BTR) in OSCs. So, all tailored molecules may enhance the efficiency of photovoltaic cells due to the involvement of potent terminal electron-capturing acceptor2 moieties. Considering these obtained results, these newly presented molecules can be regarded for developing efficient solar devices in the future.

Peripheral (E)-2-[(4-hydroxybenzylidene)-3,4-dihydronaphthalen-1(2H)-one)]-coordinated phthalocyanines with improved enzyme inhibition properties and photophysicochemical behaviors

In this study, (E)-4-{4-[(1-oxo-3,4-dihydronaphthalen-2(1H)-ylidene)methyl]phenoxy}phthalonitrile (4) and its phthalocyanine derivatives (5-8) were synthesized for the first time. Aggregation behaviors of the novel soluble phthalocyanines in organic solvents were investigated. In addition, the efficiency of 1O2 production of (5) and ZnPc (6) was investigated. The singlet oxygen quantum yields (ΦΔ) for 2HPc (5) and ZnPc (6) were found to be 0.58 and 0.83, respectively. Additionally, novel phthalocyanines (5-8) were investigated for their ability to inhibit enzymes. They exhibited a highly potent inhibition effect on human carbonic anhydrase I and II (hCA I and II) and α-glycosidase (α-Gly) enzymes. Ki values are in the range of 2.60 ± 9.87 to 11.53 ± 6.92 µM, 3.35 ± 0.53 to 15.47 ± 1.20 µM, and 28.60 ± 4.82 to 40.58 ± 7.37 nM, respectively. The calculations of the studied molecule at the B3LYP, HF, and M062X levels in the 6-31G basis sets were made using the Gaussian package program. Afterward, the interactions occurring in the docking calculation against a protein that is the crystal structure of hCA I (PDB ID: 2CAB), the crystal structure of hCA II (PDB ID: 5AML), and the crystal structure of α-Gly (PDB ID: 1R47), were examined. Following that, Protein-Ligand Interaction Profiler (PLIP) analysis was used to look at the interactions that occurred during the docking calculation in further detail.

Designing efficient materials for high-performance of non-fullerene organic solar cells through side-chain engineering on DBT-4F derivatives by non-fused-ring electron acceptors

CONTEXT

For the advancement in fields of organic and perovskite solar cells, various techniques of structural alterations are being employed on previously reported chromophores. In this study, the end-capped engineering is carried out on DBT-4F (R) by modifying terminal acceptors to improve optoelectronic and photovoltaic attributes. Seven molecules (AD1-AD7) are modeled using different push-pull acceptors. DFT/B3LYP/6-31G along with its time-dependent approach (TD-DFT) are on a payroll to investigate ground state geometries, absorption maxima (λmax), energy gap (Eg), excitation energy (Ex), internal reorganization energy, light harvesting efficiency (LHE), dielectric constant, open circuit voltage (VOC), fill factor (FF), etc. of OSCs. AD1 displayed the lowest band gap (1.76 eV), highest λmax (876 nm), lowest Ex (1.41 eV), and lowest binding energy (0.21 eV). Among various calculated parameters, all of the sketched molecules demonstrated greater dielectric constant when compared to R. The highest dielectric constant was exhibited by AD3 (56.26). AD5 exhibited maximum LHE (0.9980). Lower reorganization energies demonstrated improved charge mobility. AD5 and AD7 (1.63 and 1.68 eV) have higher values of VOC than R (1.51 eV). All novel molecules having outperforming attributes will be better candidates to enhance the efficacy of OSCs for future use.

METHODS

Precisely, a DFT and TD-DFT analysis on all of the proposed organic molecules were conducted, using the functional MPW1PW91 at 6-31G (d,p) basis set to examine their optoelectronic aspects, additionally the solvent-state computations were studied with a TD-SCF simulation. For all these simulations, Guassian 09 and GuassView 5.0 were employed. Moreover, the Origin 6.0, Multiwfn 3.8, and PyMOlyze 1.1 software were utilized for the visual depiction of the graphs of absorption, TDM, and DOS, respectively of the studied molecules. A number of crucial aspects such as FMOs, bandgaps, light-harvesting efficiency, electrostatic potential, dipole moment, ionization potential, open-circuit voltage, fill factor, binding energy, interaction coefficient, chemical hardness-softness, and electrophilicity index were also investigated for the studied molecules.

High-Efficiency and Low-Energy-Loss Organic Solar Cells Enabled by Tuning the End Group Modification of the Terthiophene-Based Acceptor Molecules to Enhance Photovoltaic Properties

In the current study, six nonfullerene small acceptor molecules were designed by end-group modification of terminal acceptors. Density functional theory calculations of all designed molecules were performed, and optoelectronic properties were computed by employing different functionals. Every constructed molecule has a significant bathochromic shift in the maximum absorption value (λmax) except AM6. AM1-AM4 molecules represented a narrow band gap (Eg) and low excitation energy values. The AM1-AM4 and AM6 molecules have higher electron mobility. Comparing AM2 to the reference molecule reveals that AM2 has higher hole mobilities. Compared to the reference molecule, all compounds have excellent light harvesting efficiency values compared to AM1 and AM2. The natural transition orbital investigation showed that AM5 and AM6 had significant electronic transitions. The open-circuit voltage (Voc) values of the computed molecules were calculated by combining the designed acceptor molecules with PTB7-Th. In light of the findings, it is concluded that the designed molecules can be further developed for organic solar cells (OSCs) with superior photovoltaic abilities.

Molecular Engineering of Anthracene Core-Based Hole-Transporting Materials for Organic and Perovskite Photovoltaics

Anthracene core-based hole-transporting material containing TIPs (triisopropylsilylacetylene) has been spotlighted as potential donors for perovskite solar cells (SCs) due to their appropriate energy levels, efficient hole transport capacity, high stability, and high power conversion efficiency. Herein, we have efficiently designed seven new highly conjugated A-B-D-C-D molecules (AS1-AS7) containing an anthracene core. We used end-capped modifications of donor units with acceptor units on one side and then theoretically characterized them for their appropriate use for SC applications. Modern quantum chemistry techniques have theoretically described the R (reference molecule) and developed (AS1-AS7) molecules. Moreover, the proposed (AS1-AS7) molecules are explored with density functional theory (DFT) and time-dependent density functional theory (TD-DFT) employing B3LYP/6-31G(d,p), and numerous parameters like photovoltaic, optical and electronic characteristics, frontier molecular orbital, excitation, binding and reorganization (λe and λh) energies, open circuit voltage, light harvesting efficiency, transition density matrix, fill factor, and the density of states have been studied. End-capped modification causes a smaller band gap between the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), higher UV-vis absorption maxima, tuned energy levels, lower binding and reorganizational (λe and λh) energies, and larger Voc values in proposed (AS1-AS7) molecules than R. AS5 has a remarkable absorption maximum of 495.94 nm and a narrow optimal energy gap (Eg) of 1.46 eV. Furthermore, a complex study of AS5:PC61BM has revealed extraordinary charge shifting at the HOMO (AS5)-LUMO (PC61BM) interface. Our results suggested that newly developed anthracene core-based compounds (AS1-AS7) would be effective candidates with excellent photovoltaic and optoelectronic properties and could be employed in future organic and perovskite SC applications.

Green Synthesis and Bioactivity of Aliphatic N-Substituted Glycine Derivatives

Standard amino acids have an asymmetric α-carbon atom to which -COOH, -NH2, -H, and -R groups are bonded. Among them, glycine is the simplest (R = -H) with no asymmetric carbon, and other natural amino acids are C-substituted of glycine. Here, we have designed and made a green synthesis of some new N-substituted glycine derivatives with R-(NH)CH2-COOH formula, where R is flexible and hydrophobic with different chain lengths and benches of the type propyl, butyl, sec-butyl, tert-butyl, pentyl, isopentyl, tert-pentyl, hexyl, 2-aminoheptyl, and octyl. These glycine derivatives were characterized by recording their melting points and FT-IR, mass, 1H NMR, and 13C NMR spectra. DFT studies revealed that 2-aminoheptyl glycine had the highest electronegativity value and can thus act as a good bidentate ligand for the metal centers. ADME comparative results and bioavailability radars indicated that both octyl- and 2-aminoheptyl glycine had the most lipophilicity, making them good agents in cell passing. Furthermore, lipophilicity determination showed that octyl glycine was the best and propylgly was more soluble than others. Based on solubility, lipophilicity, and dipole moment values, propyl- and 2-aminoheptyl-glycine were considered for bio-macromolecular interaction studies. Thus, the interaction of these two agents with DNA and HSA was studied using absorption spectroscopy and circular dichroism techniques. Due to the presence of the R-amine group, they can interact with the DNA by H-binding and hydrophobicity, while electrostatic mode could not be ruled out. Meanwhile, molecular docking studies revealed that octyl- and 2-aminoheptyl glycine had the highest negative docking energy, which reflects their higher tendency to interact with DNA. The DNA binding affinity of two candidate AAs was determined by viscosity measurement and fluorescence emission recording, which confirms that groove binding occurs. Also, the toxicity of these synthesized amino acid derivates was tested against the human foreskin fibroblast (HFF) cell line. They showed IC50 values within the range of 127-344 μM after 48 h with the highest toxicity for 2-aminoheptyl glycine.

Molecular design of D-π-A-π-D small molecule donor materials with narrow energy gap for organic solar cells applications

CONTEXT

Developing novel materials present a great challenge to improve the photovoltaic performance of organic solar cells (OSCs). In this paper, we designed a series of the donor-π bridge-acceptor-π bridge-donor (D-π-A-π-D) structure molecules. These molecules consist of diketopyrrolopyrrole (DPP) moiety as core, 9-hexyl-carbazole moiety as terminal groups, and different planar electron-rich aromatic groups as π-bridges. The density functional theory (DFT) and time-dependent DFT (TD-DFT) computations showed that the frontier molecular orbital (FMO) energy levels, energy gaps, electron-driving forces (ΔEL-L), open-circuit voltage (Voc), fill factor (FF), reorganization energy (λ), exciton binding energy (Eb), and absorption spectra of the designed molecules can be effectively adjusted by the introduction of different π-bridges. The designed molecules have narrow energy gap and strong absorption spectra, which are beneficial for improving the photoelectric conversion efficiency of organic solar cells. In addition, the designed molecules possess large ΔEL-L, large Voc, and FF values and low Eb when the typical fullerene derivatives are used as acceptors. The FMO energy levels of the designed molecules can provide match well with the typical fullerene acceptors PC61BM, bisPC61BM, and PC71BM. Our results suggest that the designed molecules are expected to be promising donor materials for OSCs.

METHODS

All DFT and TD-DFT calculations were carried out using the Gaussian 09 code. The computational technique chosen was the hybrid functional B3LYP and the 6-31G(d,p) basis set. The benzene and chloroform solvent effects have been considered using the polarized continuum model (PCM) at the TD-DFT level. The simulated absorption spectra of designed molecules were plotted by using the GaussSum 1.0 program.

Porphyrin and phthalocyanine heavy metal removal: overview of theoretical investigation for heterojunction organic solar cell applications

CONTEXT

Heavy metals are highly noxious, and their presence can cause diverse effects on living organisms and the environment. Crown ether porphyrins and phthalocyanines are known to effectively extract these pollutants and are also used in photovoltaic devices. This study aims to evaluate various factors that govern intramolecular charge transfer (ICT) and photo-injection processes, including maximum absorption wavelength (λ_max), density of states (DOS), charge transfer dipole (μ_CT), light harvesting efficiency (LHE), open-circuit voltage (V_oc), and free energy change of electron injection (ΔG_inj) in order to investigate the performance of different compounds designed from metalloporphyrins for bulk-heterojunction organic solar cell (BHJ-OSC) applications. The porphyrin complex showed the best optoelectronic properties, with remarkable LHE values and CT amounts compared to phthalocyanine derivatives. The central metal played a significant role in optimizing the optical properties of the materials for use in solar cells. HgPr4O and CdPr4O were found to have optimal V_oc values, resulting in effective injection, high electron, and hole mobilities, making them ideal materials for highly efficient BHJ-OSC devices.

METHODS

Density functional theory (DFT) approach was employed with the B3LYP functional and the def2TZVP basis set as implemented in the Gaussian 16 revision C.01 program to investigate the designed complexes and to compute geometrical parameters, frontier molecular orbitals (FMOs), and natural bond orbital (NBO). Furthermore, the time-dependent density functional theory (TD-DFT) method was used to analyze the optical properties and photovoltaic characteristics of selected metalloporphyrins by examining the UV-Vis spectra. In summary, the study presents a thorough description of the structural and electronic properties of the investigated complexes and provides insights into their potential use in photovoltaic applications.

Efficient D-π-π-A-Type Dye Sensitizer Based on a Benzothiadiazole Moiety: A Computational Study

The design of highly efficient sensitizers is one of the most significant areas in dye-sensitized solar cell (DSSC) research. We studied a series of benzothiadiazole-based D-π-π-A organic dyes, putting emphasis on the influence of the donor moiety on the DSSC's efficiency. Using (linear-response time-dependent) density functional theory ((TD)DFT)) with the CAM-B3LYP functional, different donor groups were characterized in terms of electronic absorption spectra and key photovoltaic parameters. As a reference, a dye was considered that had a benzothiadiazole fragment linked via thiophene rings to a diphenylamine donor and a cyanoacrylic-acid acceptor. The different systems were first studied in terms of individual performance parameters, which eventually aggregated into power conversion efficiency. Only the amino-substituted species showed a modest increase, whereas the dimethylamino case showed a decrease.

Numerical optimization and performance evaluation of ZnPC:PC70BM based dye-sensitized solar cell

The increase in global energy consumption and the related ecological problems have generated a constant demand for alternative energy sources superior to traditional ones. This is why unlimited photon-energy harnessing is important. A notable focus to address this concern is on advancing and producing cost-effective low-loss solar cells. For efficient light energy capture and conversion, we fabricated a ZnPC:PC70BM-based dye-sensitized solar cell (DSSC) and estimated its performance using a solar cell capacitance simulator (SCAPS-1D). We evaluated the output parameters of the ZnPC:PC70BM-based DSSC with different photoactive layer thicknesses, series and shunt resistances, and back-metal work function. Our analyses show that moderate thickness, minimum series resistance, high shunt resistance, and high metal-work function are favorable for better device performance due to low recombination losses, electrical losses, and better transport of charge carriers. In addition, in-depth research for clarifying the impact of factors, such as thickness variation, defect density, and doping density of charge transport layers, has been conducted. The best efficiency value found was 10.30% after tweaking the parameters. It also provides a realistic strategy for efficiently utilizing DSSC cells by altering features that are highly dependent on DSSC performance and output.

Synthesis, characterization and exploration of photovoltaic behavior of hydrazide based scaffolds: a concise experimental and DFT study

Solar energy being a non-depleting energy resource, has attracted scientists' attention to develop efficient solar cells to meet energy demands. Herein, a series of hydrazinylthiazole-4-carbohydrazide organic photovoltaic compounds (BDTC1-BDTC7) with an A1-D1-A2-D2 framework was synthesized with 48-62% yields, and their spectroscopic characterization was accomplished using FT-IR, HRMS, ¹H and ¹³C-NMR techniques. Density functional theory (DFT) and time dependent DFT analyses were performed utilizing the M06/6-31G(d,p) functional to calculate the photovoltaic and optoelectronic properties of BDTC1-BDTC7via numerous simulations of the frontier molecular orbitals (FMOs), transition density matrix (TDM), open circuit voltage (V _oc) and density of states (DOS). Moreover, the conducted analysis on the FMOs revealed efficient transference of charge from the highest occupied to the lowest unoccupied molecular orbitals (HOMO → LUMO), further supported by TDM and DOS analyses. Furthermore, the values of binding energy (E _b = 0.295 to 1.150 eV), as well as reorganization energy of the holes (-0.038-0.025 eV) and electrons (-0.023-0.00 eV), were found to be smaller for all the studied compounds, which suggests a higher exciton dissociation rate with greater hole mobility in BDTC1-BDTC7. V _oc analysis was accomplished with respect to HOMO_PBDB-T-LUMO_ACCEPTOR. Among all the synthesized molecules, BDTC7 was found to have a reduced band gap (3.583 eV), with a bathochromic shift and absorption maximum at 448.990 nm, and a promising V _oc (1.97 V), thus it is regarded as a potential candidate for high performance photovoltaic applications.

One-pot synthesis, X-ray crystal structure, and identification of potential molecules against COVID-19 main protease through structure-guided modeling and simulation approach

Although antimicrobial resistance before the Covid-19 pandemic is a top priority for global public health, research is already ongoing on novel organic compounds with antimicrobial and antiviral properties in changing medical environments in connection with Covid 19. Thanks to the Biginelli reaction, which allows the synthesis of pyrimidine compounds, blockers of calcium channels, antibodies, antiviral, antimicrobial, anti-inflammatory, or antioxidant therapeutic compounds were investigated. In this paper, we aim to present Biginelli's synthesis, its therapeutic properties, and the structural-functional relationship in the test compounds that allows the synthesis of antimicrobial compounds. Both the DFT and TD-DFT computations of spectral data, molecular orbitals (HOMO, LUMO) analysis, and electrostatic potential (MEP) surfaces are carried out as an add-on to synthetic research. Hirshfeld surface analysis was also used to segregate the different intermolecular hydrogen bonds involved in the molecular packing strength. Natural Bond Orbital (NBO) investigation endorses the existence of intermolecular interactions mediated by lone pair, bonding, and anti-bonding orbitals. The dipole moment, linear polarizability, and first hyperpolarizabilities have been explored as molecular parameters. All findings based on DFT exhibit the best consistency with experimental findings, implying that synthesized molecules are highly stable. To better understand the binding mechanism of the SARS-CoV-2 Mpro, we performed molecular docking, molecular dynamics (MD) simulations, and binding free energy calculations.

Theoretical investigation of fused N-methyl-dithieno-pyrrole derivatives in the context of acceptor-donor-acceptor approach

In this work we have theoretically investigated the optoelectronic properties of a series of acceptor-donor-acceptor type molecules by employing density functional theory formalism. We have used 1,1-dicyano-methylene-3-indanone as the acceptor unit and a fused N-methyl-dithieno-pyrrole as the donor unit. We have calculated the values of dihedral angle, inter-ring bond length, bond length alteration parameters, HOMO-LUMO gap, ionization potential, electron affinity, partial density of states, reorganization energies for holes and electrons, charge transfer rate for holes and electrons of the seven types of compounds designed via molecular engineering. Calculated IP and EA values manifest that PBDB-C2 shows excellent charge transportation compared to others. Absorption spectra of the designed compounds have been studied using the time-dependent density functional theory method. From the calculation of reorganization energy it is confirmed that our designed molecules behave more likely as donor materials. Our calculated results also reveal that compounds with electron donating substituents at the acceptor units show higher value of λ max. Absorption spectra of donor/acceptor blends show similar trends with the isolated compounds. Observed lower exciton binding energy values for all the compounds indicate facile charge carrier separation at the donor/acceptor interface. Moreover, the negative values of Gibb's free energy change also indicate the ease of exciton dissociation of all the designed compounds. The photovoltaic characteristics of the studied compounds infer that all the designed compounds have the potential to become suitable candidate for the fabrication of organic semiconductors. However, PBDB-C2 and PBDB-C4 with the highest PCE of 18.25% can become the best candidate for application in photovoltaics.

Graphene-derived antibacterial nanocomposites for water disinfection: Current and future perspectives

Antimicrobial nanomaterials provide numerous opportunities for the synthesis of next-generation sustainable water disinfectants. Using the keywords graphene and water disinfection and graphene antibacterial activity, a detailed search of the Scopus database yielded 198 and 1433 studies on using graphene for water disinfection applications and graphene antibacterial activity in the last ten years, respectively. Graphene family nanomaterials (GFNs) have emerged as effective antibacterial agents. The current innovations in graphene-, graphene oxide (GO)-, reduced graphene oxide (rGO)-, and graphene quantum dot (GQD)-based nanocomposites for water disinfection, including their functionalization with semiconductor photocatalysts and metal and metal oxide nanoparticles, have been thoroughly discussed in this review. Furthermore, their novel application in the fabrication of 3D porous hydrogels, thin films, and membranes has been emphasized. The physicochemical and structural properties affecting their antibacterial efficiency, such as sheet size, layer number, shape, edges, smoothness/roughness, arrangement mode, aggregation, dispersibility, and surface functionalization have been highlighted. The various mechanisms involved in GFN antibacterial action have been reviewed, including the mechanisms of membrane stress, ROS-dependent and -independent oxidative stress, cell wrapping/trapping, charge transfer, and interaction with cellular components. For safe applications, the potential biosafety and biocompatibility of GFNs in aquatic environments are emphasized. Finally, the current limitations and future perspectives are discussed. This review may provide ideas for developing efficient and practical solutions using graphene-, GO-, rGO-, and GQD-based nanocomposites in water disinfection by rationally employing their unique properties.

Quantum chemical designing of novel fullerene-free acceptor molecules for organic solar cell applications

Organic solar cells (OSCs) with bulk heterojunction (BHJ) structures consisting of electron-donor and electron-acceptor materials have achieved impressive progress over the past decade, demonstrating their great potential in practical applications. In this study, we have designed five fullerene-free acceptor-based molecules containing indaceno-dithiophene as a central core moiety. We studied the optoelectronic features of these newly architecture molecules by using DFT and TD-DFT approaches. For the investigation of the optoelectronic characteristics of the reference and newly designed molecules, we performed different parameters including FMO's, absorption maxima, excitation energy, transition density matrix (TDM) along with binding energy, dipole moment, the partial density of states, charge mobility, and charge transfer analysis. Among all engineered molecules, SK1 has proven to be the most efficient solar cell due to its promising optoelectronic and photovoltaic properties. SK1 reveals smaller band-gap (E_gap = 1.959 eV) and lesser λ_h (0.0070 eV) and λ_e (0.0051 eV). SK1 illustrated comparable binding energy value (0.33 eV) and lowest excitation energy (1.62 eV) which will lead to improved power conversion efficiency values. The SK1 molecule demonstrated the highest λ_max value (764 nm) in the solvent phase which could lead to redshift absorption for achieving the high efficiency of OSCs. This molecular modeling approves that the best working efficiency of organic solar devices can be achieved by terminal group modifications due to their promising photovoltaic and optoelectronic properties. It is evident from the current analysis that all the theoretically fabricated molecules (SK1-SK5) are fabulous and highly suggested to experimental workers for their synthesis and advancement of these highly competent solar devices in the future.