Advances in multifunctional chitosan-based self-healing hydrogels for biomedical applications

Crosslinked hydrogel-derived carbons activated by trace amounts of aqueous potassium carbonate for carbon dioxide adsorption

A new method for green synthesis of activated carbon using chitosan-based hydrogel precursors is reported. Chitosan-based hydrogel materials are designed to absorb trace amounts of non-toxic and non-corrosive activating agent K2CO3 from dilute aqueous solution. The K2CO3 impregnated hydrogels are further freeze-dried and converted to activated carbons with tuneable pore structure by a single-step pyrolysis. Activated carbon with highest pore volume of 0.76 cm3/g and surface area of 2026 m2/g is obtained by using K2CO3 as low as 0.23 g per gram of chitosan hydrogel. It can adsorb maximum CO2 of 4.2 mmol/g at 25 °C and 1 bar. This study demonstrates that biopolymer hydrogels impregnated with trace amounts of K2CO3 are excellent precursor materials to design high surface area carbons for CO2 capture.

Chitosan catechol-tannic acid composite hydrogel and cryogel with antimicrobial and hemostatic properties

Hydrogels containing catechol group have received attention in the biomedical field due to their robust adhesive/cohesive capabilities, biocompatibility, and hemostatic abilities. Catechol-functionalized chitosan holds promise for preparing self-assembly hydrogels. However, issues of inefficient gelation and instability still persist in these hydrogels. In the current study, we synthesized chitosan catechol (CC) of high catechol substitution (∼28 %) and combined CC with tannic acid (TA, which also contains catechol) to form self-healing CC-TA hydrogels. The catechol-enriched CC-TA composite hydrogels showed rapid gelation and mechanical reinforcement (shear modulus ∼110 Pa). In situ coherent small-angle X-ray scattering (SAXS) coupled with rheometry revealed a morphological feature of mesoscale clusters (∼20 nm) within CC-TA hydrogel. The clusters underwent dynamic destruction under large-amplitude oscillatory shear, corresponding with the strain-dependent and self-healing behavior of the CC-TA hydrogel. The composite hydrogel had osmotic-responsive and notable adhesive properties. Meanwhile, CC-TA composite cryogel prepared simply through freeze-thawing procedures exhibited distinctive macroporous structure (∼200 μm), high water swelling ratio (∼7000 %), and favorable compressive modulus (∼8 kPa). The sponge-like cryogel was fabricated into swabs, demonstrating hemostatic capacity. The CC-TA composites, in both hydrogel and cryogel forms, possessed ROS scavenging ability, antimicrobial activity, and cell compatibility with potentials in biological applications.

Self-Healing Hydrogel Bioelectronics

Hydrogels have emerged as powerful building blocks to develop various soft bioelectronics because of their tissue-like mechanical properties, superior bio-compatibility, the ability to conduct both electrons and ions, and multiple stimuli-responsiveness. However, hydrogels are vulnerable to mechanical damage, which limits their usage in developing durable hydrogel-based bioelectronics. Self-healing hydrogels aim to endow bioelectronics with the property of repairing specific functions after mechanical failure, thus improving their durability, reliability, and longevity. This review discusses recent advances in self-healing hydrogels, from the self-healing mechanisms, material chemistry, and strategies for multiple properties improvement of hydrogel materials, to the design, fabrication, and applications of various hydrogel-based bioelectronics, including wearable physical and biochemical sensors, supercapacitors, flexible display devices, triboelectric nanogenerators (TENGs), implantable bioelectronics, etc. Furthermore, the persisting challenges hampering the development of self-healing hydrogel bioelectronics and their prospects are proposed. This review is expected to expedite the research and applications of self-healing hydrogels for various self-healing bioelectronics.

Chitosan-based hydrogels: From preparation to applications, a review

Chitosan, derived from the deacetylation of chitin, is an abundant natural biopolymer on earth. Chitosan and its derivatives have become promising biological materials because of their unique molecular structure and excellent biological activities. The reactive functional groups of chitosan such as the amino and hydroxyl groups play a crucial role in facilitating the synthesis of three-dimensional hydrogel. Chitosan-based hydrogels have been widely used in medical, pharmaceutical, and environmental fields for years. Nowadays, chitosan-based hydrogels have been found in a wide range of applications in the food industry such as food sensors, dye adsorbents and nutrient carriers. In this review, recently developed methods for the preparation of chitosan-based hydrogels were given, and the biological activities of chitosan-based hydrogels were systematically introduced. Additionally, the recent progress in food sensors, packaging, dye adsorbents, and nutrient carriers was discussed. Finally, the challenges and prospects for the future development of chitosan-based hydrogels were discussed.

Polyoxometalate nanocluster-infused triple IPN hydrogels for excellent microplastic removal from contaminated water: detection, photodegradation, and upcycling

Microplastic (MP) pollution pervades global ecosystems, originating from improper plastic disposal and fragmentation due to factors like hydrolysis and biodegradation. These minute particles, less than 5 mm in size, have become omnipresent, impacting terrestrial, freshwater, and marine environments worldwide. Their ubiquity poses severe threats to marine life by causing physical harm and potentially transferring toxins through the food chain. Addressing this environmental crisis necessitates a sustainable strategy. Our proposed solution involves a highly efficient copper substitute polyoxometalate (Cu-POM) nanocluster infused triple interpenetrating polymer network (IPN) hydrogel, comprising chitosan (CS), polyvinyl alcohol (PVA), and polyaniline (PANI) (referred to as pGel@IPN) for mitigating MP contamination from water. This 3D IPN architecture, incorporating nanoclusters, also enhances the hydrogel's photodegradation capabilities. Our scalable approach offers a sustainable strategy to combat MPs in water bodies, as demostrated by the adsorption behaviors on the hydrogel matrix under varying conditions, simulating real-world scenarios. Evaluations of physicochemical properties, mechanical strength, and thermal behavior underscore the hydrogel's robustness and stability. Detecting minute MP particles remains challenging, prompting us to label MPs with Nile red for fluorescence microscopic analysis of their concentration and adsorption on the hydrogel. The catalytic properties of POM within the hydrogel facilitate UV-induced MP degradation, highlighting a sustainable solution. Our detailed kinetics and isotherm studies revealed pseudo-first-order and Langmuir models as fitting descriptors for MP adsorption, exhibiting a high maximum adsorption capacity (Qm). Notably, pGel@IPN achieved ∼95% and ∼93% removal efficiencies for polyvinyl chloride (PVC) and polypropylene (PP) MPs at pH ∼ 6.5, respectively, also demonstrating reusability for up to 5 cycles. Post-end-of-life, the spent adsorbent was efficiently upcycled into carbon nanomaterials, effectively removing the heavy metal Cr(VI), exemplifying circular economy principles. Our prepared hydrogel emerges as a potent solution for MP removal from water, promising effective mitigation of the emerging pollutants of MPs while ensuring sustainable environmental practices.

Immunomodulatory hydrogels for skin wound healing: cellular targets and design strategy

Skin wounds significantly impact the global health care system and represent a significant burden on the economy and society due to their complicated dynamic healing processes, wherein a series of immune events are required to coordinate normal and sequential healing phases, involving multiple immunoregulatory cells such as neutrophils, macrophages, keratinocytes, and fibroblasts, since dysfunction of these cells may impede skin wound healing presenting persisting inflammation, impaired vascularization, and excessive collagen deposition. Therefore, cellular target-based immunomodulation is promising to promote wound healing as cells are the smallest unit of life in immune response. Recently, immunomodulatory hydrogels have become an attractive avenue to promote skin wound healing. However, a detailed and comprehensive review of cellular targets and related hydrogel design strategies remains lacking. In this review, the roles of the main immunoregulatory cells participating in skin wound healing are first discussed, and then we highlight the cellular targets and state-of-the-art design strategies for immunomodulatory hydrogels based on immunoregulatory cells that cover defect, infected, diabetic, burn and tumor wounds and related scar healing. Finally, we discuss the barriers that need to be addressed and future prospects to boost the development and prosperity of immunomodulatory hydrogels.

Recent Advances of Chitosan-Based Hydrogels for Skin-Wound Dressings

The management of wound healing represents a significant clinical challenge due to the complicated processes involved. Chitosan has remarkable properties that effectively prevent certain microorganisms from entering the body and positively influence both red blood cell aggregation and platelet adhesion and aggregation in the bloodstream, resulting in a favorable hemostatic outcome. In recent years, chitosan-based hydrogels have been widely used as wound dressings due to their biodegradability, biocompatibility, safety, non-toxicity, bioadhesiveness, and soft texture resembling the extracellular matrix. This article first summarizes an overview of the main chemical modifications of chitosan for wound dressings and then reviews the desired properties of chitosan-based hydrogel dressings. The applications of chitosan-based hydrogels in wound healing, including burn wounds, surgical wounds, infected wounds, and diabetic wounds are then discussed. Finally, future prospects for chitosan-based hydrogels as wound dressings are discussed. It is anticipated that this review will form a basis for the development of a range of chitosan-based hydrogel dressings for clinical treatment.

Injectable, Shear-Thinning, Self-Healing, and Self-Cross-Linkable Benzaldehyde-Conjugated Chitosan Hydrogels as a Tissue Adhesive

Benzaldehyde-conjugated chitosan (CH-CBA) was synthesized by a coupling reaction between chitosan (CH) and carboxybenzaldehyde (CBA). The pH-sensitive self-cross-linking can be achieved through the Schiff base reaction. The degree of substitution (DS) of CH-CBA was controlled at 1.4-12.7% by optimizing the pH and reagent stoichiometry. The dynamic Schiff base linkages conferred strong shear-thinning and self-healing properties to the hydrogels. The viscosity of the 2 wt/v % CH-CBA hydrogel decreased from 5.3 × 107 mPa·s at a shear rate of 10-2 s-1 to 2.0 × 103 mPa·s at 102 s-1 at pH 7.4. The CH-CBA hydrogel exhibited excellent biocompatibility in vitro and in vivo. Moreover, the hydrogel adhered strongly to porcine small intestine, colon, and cecum samples, comparable to commercial fibrin glue, and exhibited effective in vivo tissue sealing in a mouse cecal ligation and puncture model, highlighting its potential as a biomaterial for application in tissue adhesives, tissue engineering scaffolds, etc.

Multifunctional self-healing hydrogels via nanoengineering of colloidal and polymeric cellulose

The unique features of self-healing hydrogels hold great potential for biomedical applications including injectable hydrogels for cancer treatment, procedures for tumor removal or resection. However, the fabrication of durable and multifunctional self-healing hydrogels composed of biocompatible, green building blocks via versatile synthetic methodology continues to pose a significant challenge. Here, we engineered dialdehyde cellulose (DAC, as a macromolecular bio-crosslinker), and electrosterically stabilized nanocrystalline cellulose (ENCC, as a ligand-targeted drug carrier) to facilitate a strategy for the construction of self-healing hydrogels. Benefiting from its high carboxyl group density, ENCC was functionalized with folic acid (FA) using a non-toxic DMTMM coupling agent and loaded with doxorubicin (DOX, a model drug) through electrostatic interactions. A natural self-healing hydrogel was prepared from carboxymethyl chitosan (CCTS) and DAC mixed with DOX-loaded FA-ENCC using dynamic Schiff-base and hydrogen linkages. A combination of active supramolecular and vital covalent junctions led to a soft (storage modulus ∼500 Pa) and durable material, with rapid (< 5 min) reconstruction of molecular structure from fractured and injected to intact forms. The DAC-CCTS hydrogel showed an appreciable loading capacity of ∼5 mg g-1. Biocompatibility of the hydrogels was evaluated using cell viability and metabolic activity assays, showing lower metabolic activity due to sustained release of its cargo. These materials offer a versatile, sustainable, and green platform for the efficient construction of hydrogels, based on macro- and nano-engineered cellulose, the most abundant and easily accessible biopolymer.

Multifunctional hydrogel bioscaffolds based on polysaccharide to promote wound healing: A review

Various types of skin wounds pose challenges in terms of healing and susceptibility to infection, which can have a significant impact on physical and mental well-being, and in severe cases, may result in amputation. Conventional wound dressings often fail to provide optimal support for these wounds, thereby impeding the healing process. As a result, there has been considerable interest in the development of multifunctional polymer matrix hydrogel scaffolds for wound healing. This review offers a comprehensive review of the characteristics of polysaccharide-based hydrogel scaffolds, as well as their applications in different types of wounds. Additionally, it evaluates the advantages and disadvantages associated with various types of multifunctional polymer and polysaccharide-based hydrogel scaffolds. The objective is to provide a theoretical foundation for the utilization of multifunctional hydrogel scaffolds in promoting wound healing.

Schiff base and coordinate bonds cross-linked chitosan-based eutectogels with ultrafast self-healing, self-adhesive, and anti-freezing capabilities for motion detection

Ion conductors offer great potential for diverse electric applications. However, most of the ion conductors were fabricated from non - degradable petroleum-based polymers with non or low biodegradability, which inevitably leads to resource depletion and waste accumulation. Fabricating ion conductors based on renewable, and sustainable materials is highly desirable and valuable. Herein, a series of eutectogels were designed through dual-dynamic-bond cross-linking among ferric iron (Fe3+), protocatechualdehyde (PA), and chitosan (CS) in 1 - allyl-3 - methylimidazole chloride ionic liquid/urea (AmimCl/urea) eutectic-based ionic liquid. Due to the presence of AmimCl/urea eutectic-based ionic liquid, the obtained CS - PA@Fe eutectogels showed excellent ionic conductivity, superior anti-freezing properties that could maintain flexibility and high electrical properties at -20 °C. Dual-dynamic-bond cross-linking of catechol-Fe coordinate and dynamic Schiff base bonds equip CS - PA@Fe eutectogels with excellent injectable, and self-healing abilities. Additionally, due to the presence of phenolic hydroxyl groups of PA, the obtained CS - PA@Fe eutectogels present good adhesiveness. Based on the CS - PA@Fe eutectogels, multifunctional flexible strain sensors with high sensitivity, stability, as well as rapid response speed at wide operating temperature ranges were successfully fabricated. Thus, this study offers a promising strategy for fabricating naturally occurring biopolymers based eutectogels, which show great potential as high-performance flexible strain sensors for next-generation wearable electronic devices.

Tissue adhesives based on chitosan for skin wound healing: Where do we stand in this era? A review

Chitosan has been commonly used as an adhesive dressing material due to its excellent biocompatibility, degradability, and renewability. Tissue adhesives are outstanding among wound dressings because they can close the wound, absorb excess tissue exudate from the wound site, provide a moist environment, and act as a carrier for loading various bioactive molecules. They have been widely used in both preclinical and clinical treatment of skin wounds. This review summarizes recent research progresses in the application of chitosan and its derivatives for tissue adhesives. We also introduce their biomedical effects on wound adhesion, contamination isolation, antibacterial, immune regulation, and wound healing, and the strategies to achieve these functions when used as wound dressings. Finally, challenges and future perspectives of chitosan-based tissue adhesives are discussed for wound healing.

Application of Chitosan-Based Hydrogel in Promoting Wound Healing: A Review

Chitosan is a linear polyelectrolyte with active hydroxyl and amino groups that can be made into chitosan-based hydrogels by different cross-linking methods. Chitosan-based hydrogels also have a three-dimensional network of hydrogels, which can accommodate a large number of aqueous solvents and biofluids. CS, as an ideal drug-carrying material, can effectively encapsulate and protect drugs and has the advantages of being nontoxic, biocompatible, and biodegradable. These advantages make it an ideal material for the preparation of functional hydrogels that can act as wound dressings for skin injuries. This review reports the role of chitosan-based hydrogels in promoting skin repair in the context of the mechanisms involved in skin injury repair. Chitosan-based hydrogels were found to promote skin repair at different process stages. Various functional chitosan-based hydrogels are also discussed.

Rational design of viscoelastic hydrogels for periodontal ligament remodeling and repair

The periodontal ligament (PDL) is a distinctive yet critical connective tissue vital for maintaining the integrity and functionality of tooth-supporting structures. However, PDL repair poses significant challenges due to the complexity of its mechanical microenvironment encompassing hard-soft-hard tissues, with the viscoelastic properties of the PDL being of particular interest. This review delves into the significant role of viscoelastic hydrogels in PDL regeneration, underscoring their utility in simulating biomimetic three-dimensional microenvironments. We review the intricate relationship between PDL and viscoelastic mechanical properties, emphasizing the role of tissue viscoelasticity in maintaining mechanical functionality. Moreover, we summarize the techniques for characterizing PDL's viscoelastic behavior. From a chemical bonding perspective, we explore various crosslinking methods and characteristics of viscoelastic hydrogels, along with engineering strategies to construct viscoelastic cell microenvironments. We present a detailed analysis of the influence of the viscoelastic microenvironment on cellular mechanobiological behavior and fate. Furthermore, we review the applications of diverse viscoelastic hydrogels in PDL repair and address current challenges in the field of viscoelastic tissue repair. Lastly, we propose future directions for the development of innovative hydrogels that will facilitate not only PDL but also systemic ligament tissue repair. STATEMENT OF SIGNIFICANCE.

Engineering superstable islets-laden chitosan microgels with carboxymethyl cellulose coating for long-term blood glucose regulation in vivo

Islet transplantation to restore endogenous insulin secretion is a promising therapy for type 1 diabetes in clinic. However, host immune rejection seriously limits the survival of transplanted islets. Despite of the various encapsulation strategies and materials developed so far to provide immune isolation for transplanted islets, long-term blood glucose regulation is still difficult due to the inherent defects of the encapsulation materials. Herein, a novel islet-encapsulation composite material with low immunogenicity, good biocompatibility and excellent stability is reported. Specifically, chitosan (CS) microgels (diameter: ∼302 μm) are prepared via Michael addition reaction between maleimide grafted chitosan (CS-Mal) and thiol grafted chitosan (CS-NAC) in droplet-based microfluidic device, and then zwitterionic surface layer is constructed on CS microgel surface by covalent binding between maleimide groups on CS and thiol groups on thiol modified carboxymethyl cellulose (CMC-SH). The as-formed carboxymethyl cellulose coated chitosan (CS@CMC) microgels show not only long-term stability in vivo owing to the non-biodegradability of CMC, but also fantastic anti-adsorption and antifibrosis because of the stable zwitterionic surface layer. As a result, islets encapsulated in the CS@CMC microgels exhibit high viability and good insulin secretion function in vivo, and long-term blood glucose regulation is achieved for 180 days in diabetic mice post-transplantation.

Optimization of rapid self-healing and self-adhesive gluten/guar gum crosslinked gel for strain sensors and electronic devices

In this study, a smart strain sensor based on gluten/guar gum (GG) copolymer containing a combination of additives was developed. The mix proportions of strain sensors were designed using Taguchi method coupled with Grey relational analysis. L16 orthogonal array with three factors, viz. tannic acid (TA), glycerol and sodium chloride (NaCl) at four-levels each was optimized. The addition of TA substantially enhanced tensile strength, self-adhesion ability and conductivity. The self-adhesion ability could also be improved by adding NaCl in range of 0-5 wt%. The presence of glycerol in strain sensors could reduce the self-healing time which was found in the range of 28.75-150 s. In addition, the incorporation of glycerol into gel also improved stretchability of strain sensors. The best mix proportion of strain sensor was found to be 3.75 wt% TA, 30 vol% glycerol and 5 wt% NaCl. The best mixture of stain sensor showed the highest gauge factor (GF) of 0.61 % at a stretchability of 665 % and rapid self-healing at 70 s. This strain sensor could be applied to monitor human limb movements in a wide temperature range from -20 °C to 50 °C. Furthermore, the obtained gel was successfully used as electronic devices and self-powered sensors.

Self-healing hydrogels based on biological macromolecules in wound healing: A review

The complete healing of skin wounds has been a challenge in clinical treatment. Self-healing hydrogels are special hydrogels formed by distinctive physicochemically reversible bonds, and they are considered promising biomaterials in the biomedical field owing to their inherently good drug-carrying capacity as well as self-healing and repair abilities. Moreover, natural polymeric materials have received considerable attention in skin tissue engineering owing to their low cytotoxicity, low immunogenicity, and excellent biodegradation rates. In this paper, we review recent advances in the design of self-healing hydrogels based on natural polymers for skin-wound healing applications. First, we outline a variety of natural polymers that can be used to construct self-healing hydrogel systems and highlight the advantages and disadvantages of different natural polymers. We then describe the principle of self-healing hydrogels in terms of two different crosslinking mechanisms-physical and chemical-and dissect their performance characteristics based on the practical needs of skin-trauma applications. Next, we outline the biological mechanisms involved in the healing of skin wounds and describe the current application strategies for self-healing hydrogels based on these mechanisms. Finally, we analyze and summarize the challenges and prospects of natural-material-based self-healing hydrogels for skin applications.

Engineering pH responsive carboxyethyl chitosan and oxidized pectin -based hydrogels with self-healing, biodegradable and antibacterial properties for wound healing

As an important organ of the human body, effective protection of the skin during trauma is crucial. An ideal wound dressing should have adhesion, adsorption of wound secretions, and good antibacterial properties. Two kinds of natural polysaccharide-based hydrogels, carboxyethyl chitosan/oxidized pectin hydrogel (CEC/OP) and carboxyethyl chitosan/oxidized pectin/polyethyleneimine hydrogel (CEC/OP/PEI), were reported by using carboxyethyl chitosan as the matrix, and oxidized pectin and branched polyethyleneimine as the crosslinking agents. Both hydrogels could be formed in a short time and exhibited the pH responsively due to the presence of imine bond. Compared with carboxyethyl chitosan/oxidized pectin hydrogel, polyethyleneimine containing hydrogel can form gel quickly, a more compact and stable three-dimensional space network structure was formed, which exhibited better swelling performance, the swelling ration, rheology property, self-repair ability, and antibacterial performance. When the mass fractions of carboxyethyl chitosan and oxidized pectin solutions are 4 wt% and 9 wt%, respectively, the hydrogel exhibited an antibacterial efficiency of >96 % against both Staphylococcus aureus and Escherichia coli. After adding 0.75 wt% polyethyleneimine, the antibacterial efficiency of hydrogel could reach up to >98 %. More importantly, the polyethyleneimine containing hydrogel has a significant effect in the treatment of bacterially infected wounds.

Gold@mesoporous polydopamine nanoparticles modified self-healing hydrogel for sport-injuring therapy

Sports-related damage is a prevalent issue, which a combination therapy including photothermal irradiation, self-healing dressing and antibacterial treatment is an effective way to rehabilitate it. In the study, a multifunctional hydrogel was developed to meet the requirement. Firstly, mesoporous polydopamine (MPDA) was prepared, where gold nanoparticles (Au NPs) were formed in its mesoporous structure, to construct Au@MPDA NPs with nanosize about 200 nm. Synergetic and efficient photothermal effect was achieved by the combination of the two photothermal agents. The Au@MPDA NPs were then added to modify polyvinyl alcohol-carboxymethyl chitosan-borax (PCB) hydrogel. Via rheological property characterization, cell experiments and antibacterial evaluation, high photothermal efficiency and effective antibacterial activity of Au@MPDA@PCB hydrogel was obtained with the aid of Au@MPDA NPs, together with self-healing property. When treated in motion-related tissue, the modified hydrogel showed excellent adaptive property and photothermal effect in situ. This study is beneficial for developing a novel rehabilitation treatment strategy for sports-related injuries.

A temperature and pH dual-responsive injectable self-healing hydrogel prepared by chitosan oligosaccharide and aldehyde hyaluronic acid for promoting diabetic foot ulcer healing

Chronic wound, such as skin defect after burn, pressure ulcer, and diabetic foot ulcer is very difficult to cure. Its pathological process is often accompanied with local temperature rise, pH decrease, and other phenomena. Owing to their outstanding hydrophilic, biocompatibility, and responsive properties, hydrogels could accelerate the healing process. In this study, we chose chitosan oligosaccharide (COS) grafted with Pluronic F127 (F127-COS). Aldehyde hyaluronic acid (A-HA) oxidized by NaIO4. And added boric acid (BA) to prepare a thermosensitive and pH-responsive injectable self-healing F127-COS/A-HA/COS/BA (FCAB) hydrogel, loaded with drug deferoxamine (DFO) in order to have an accurate release and promote angiogenesis of diabetic foot ulcer. In vitro experiments had verified that the FCAB hydrogel system loaded with DFO (FCAB/D) could promote migration and angiogenesis of HUVEC. A diabetes rat back wound model further confirmed its role in promoting angiogenesis in wound repair process. The results showed that the FCAB/D hydrogel exhibited unique physicochemical properties, excellent biocompatibility, and significantly enhanced therapeutic effects for diabetic foot ulcer.

Dendronization of chitosan to afford unprecedent thermoresponsiveness and tunable microconfinement

Convenient chemical modification of biomacromolecules to create novel biocompatible functional materials satisfies the current requirements of sustainable chemistry. Dendronization of chitosan with dendritic oligoethylene glycols (OEGs) paves a strategy for the preparation of functional dendronized chitosans (DCSs) with unprecedent thermoresponsive behavior, which inherit biological features from polysaccharides and the topological features from dendritic OEGs. In addition, densely packed dendritic OEG chains around the backbone provide efficient cooperative interactions and form an intriguing confined microenvironment based on the degradable biopolymers. In this perspective, we describe the principle for the preparation of the thermoresponsive DCSs, and focus on the molecular envelop effect from the hydrophobic microconfinement to the encapsulated guest molecules or moieties. Particular attention is put on their capacity to regulate behavior and the functions of the encapsulated guests through thermally-mediated dehydration and collapse of the densely packed dendritic OEGs. We believe that the methodology described here may provide prospects for the fabrication of functional materials from biomacromolecules, especially when used as environmentally friendly nanomaterials or in accurate diagnosis and therapy.

Rapid Synthesis of Robust Antibacterial and Biodegradable Hydrogels via Frontal Polymerization

Chitosan (CS) is widely used in biomedical hydrogels due to their similarity to extracellular matrix. However, the preparation method of CS-based hydrogel suffers the drawbacks of tedious operation, time-consuming and energy consumption. Thus, there is an urgent need to develop a rapid synthesis pathway towards hydrogels. In this work, we used a modified CS as a cross-linking agent and acrylic acid (AA) as monomer to prepare a hydrogel through frontal polymerization (FP), which facilitates a facile and rapid method achieved in several minutes. The occurrence of pure FP was confirmed via the frontal velocity and temperature profile measurement. In addition, the as-prepared hydrogel shows excellent mechanical strength up to 1.76 MPa, and the Young's modulus (ranging from 0.16 to 0.56 MPa) is comparable to human skin. The degradation mechanism is revealed by the micro-IR images through the distribution of the functional groups, which is attributed to the breakage of the ether bond. Moreover, the hydrogel exhibits excellent degradability, biocompatibility and antibacterial properties, offering great potentials in tissue engineering. We believe this work not only offers a facile and rapid FP method to fabricate a robust degradable hydrogel, but also provides an effective pathway for the investigation of the degradation mechanism at the chemical bond analysis level.

Stabilization of capsanthin in physically-connected hydrogels: Rheology property, self-recovering performance and syringe/screw-3D printing

This work presented a facile way of stabilizing capsanthin by physically-connected soft hydrogels via utilizing specially-structured polysaccharides, and investigated rheological properties, self-recovering mechanism and 3D printability. The functionalized hydrogels demonstrated excellent color quality including redness, yellowness index and hue with great storage stability and visual perception. The soft hydrogels fabricated with properly sequenced polyglyceryl fatty acid esters, β-cyclodextrin, chitosan, and low-content capsanthin possessed outstanding extrudability, appropriate yield stress, reasonable mechanical strength, rational elasticity and structure sustainability. Furthermore, the self-recovering properties based on hydrogen bonds, host-guest interactions and electrostatic interactions were revealed and verified by structural, zeta potential, micro-morphological, zeta potential, thixotropic, creep-recovery, and macroscopic/microscopic characterizations. Along with excellent antioxidant performance, the subsequent 3D printing onto bread with complex models elucidated the high geometry accuracy and great sensory characters. The sequenced physically-connected hydrogels incorporated with capsanthin can provide new insights on stabilizing hydrophobic biomaterials and developing the 3D printed exquisite, innovative food.

Biomass-based single- and double-network hydrogels derived from cellulose microfiber and chitosan for potential application as plant growing substrate

A series of hydrogels were synthesized from renewable and low-cost micro-sized cellulose fiber. The single-network hydrogel was composed of cellulose fiber and a small amount of another polysaccharide, chitosan, which 'glued' individual cellulose fiber pieces together through Schiff-base bonding. The double-network hydrogel was constructed by adding a secondary network, the covalently crosslinked polyacrylamide, into the single-network hydrogel, which was synthesized by conducting Schiff-base reaction and free radical polymerization at the same time in a facile one-pot process. In both single- and double-network hydrogels, cellulose fiber constituted the dominant component. Both types of hydrogels exhibited good swelling properties. The double-network hydrogel showed much improved stability against soaking in water and higher salt tolerance. Germination experiment with choy sum seeds sowed on hydrogel surface showed that the seeds were able to germinate and further develop roots, shoots, and true leaves, demonstrating the potential of the biomass-derived hydrogels for soilless plant growing applications.

Chitosan-Based Self-Healing Hydrogel: From Fabrication to Biomedical Application

Biocompatible self-healing hydrogels are new-generation smart soft materials that hold great promise in biomedical fields. Chitosan-based self-healing hydrogels, mainly prepared via dynamic imine bonds, have attracted broad attention due to their mild preparation conditions, excellent biocompatibility, and self-recovery ability under a physiological environment. In this review, we present a comprehensive overview of the design and fabrication of chitosan-based self-healing hydrogels, and summarize their biomedical applications in tissue regeneration, customized drug delivery, smart biosensors, and three/four dimensional (3D/4D) printing. Finally, we will discuss the challenges and future perspectives for the development of chitosan-based self-healing hydrogels in the biomedical field.

Self-Healing of Pluronic® F127 Hydrogels in the Presence of Various Polysaccharides

Thermoresponsive Pluronic® F127 (PL) gels in water were investigated through rheological tests in different shear conditions. The gel strength was tuned with the addition of 1% polysaccharide solution. In the presence of xanthan gum (XG), the viscoelastic behavior of PL-based hydrogels was improved in aqueous environment, but the rheological behavior was less changed with the addition of XG in PBS solutions, whereas in the presence of 0.1 M NaCl, the viscoelastic parameters decreased. PL micellar networks exhibited a self-healing ability, recovering their initial structure after applying cycles of high strain. The rheological characteristics of the PL hydrogel changed with the addition of 1% polysaccharides (xanthan gum, alginate, κ-carrageenan, gellan, or chitosan). PL/polysaccharide systems form temperature-responsive hydrogels with shear thinning behavior, yield stress, and self-healing ability, being considered a versatile platform for injectable biomaterials or bioinks. Thus, in the presence of xanthan gum in aqueous medium, the gel strength was improved after applying a high strain (the values of elastic modulus increased). The other investigated natural polymers induced specific self-healing behaviors. Good performances were observed with the addition of gellan gum, alginate, and κ-carrageenan, but for high values of strain, the ability to recover the initial structure decreased. A modest self-healing behavior was observed in the presence of chitosan and xanthan gum dissolved in NaCl solution.

Injectable, antibacterial, and oxygen-releasing chitosan-based hydrogel for multimodal healing of bacteria-infected wounds

Bacterial infection is one of the main challenges of wound healing. It imposes financial and healthcare costs. The emergence of antibiotic-resistant bacteria has increased concerns about this challenge, and made finding alternative solutions a crucial aim. We created a new, antibacterial, multifunctional hydrogel with synergistic chemodynamic and photothermal features for wound-healing applications. We fabricated a chitosan (CT)-based hydrogel containing tannic acid (TA), Fe, and MnO2 nanosheets (CT-TA-Fe-MnO2) via a simple method and characterized it. The antibacterial features (resulting from the production of reactive oxygen species within bacterial cells) and healing ability (via anti-inflammatory and hemostatic features) of the hydrogel were confirmed in vitro. In vivo results revealed the effectiveness of the CT-TA-Fe-MnO2 hydrogel in decreasing the hemostatic time, improving anti-inflammatory effects, and promoting wound healing during 14 days by enhancing the deposition and maturation of collagen fibers without affecting the vital organs. The fabricated CT-TA-Fe-MnO2 hydrogel could be a promising candidate with antibacterial and anti-inflammatory activities suitable for wound-healing applications.

Recent Advances in Biodegradable and Biocompatible Synthetic Polymers Used in Skin Wound Healing

The treatment of skin wounds caused by trauma and pathophysiological disorders has been a growing healthcare challenge, posing a great economic burden worldwide. The use of appropriate wound dressings can help to facilitate the repair and healing rate of defective skin. Natural polymer biomaterials such as collagen and hyaluronic acid with excellent biocompatibility have been shown to promote wound healing and the restoration of skin. However, the low mechanical properties and fast degradation rate have limited their applications. Skin wound dressings based on biodegradable and biocompatible synthetic polymers can not only overcome the shortcomings of natural polymer biomaterials but also possess favorable properties for applications in the treatment of skin wounds. Herein, we listed several biodegradable and biocompatible synthetic polymers used as wound dressing materials, such as PVA, PCL, PLA, PLGA, PU, and PEO/PEG, focusing on their composition, fabrication techniques, and functions promoting wound healing. Additionally, the future development prospects of synthetic biodegradable polymer-based wound dressings are put forward. Our review aims to provide new insights for the further development of wound dressings using synthetic biodegradable polymers.

Glycopolypeptide hydrogels with adjustable enzyme-triggered degradation: A novel proteoglycans analogue to repair articular-cartilage defects

Proteoglycans (PGs), also known as a viscous lubricant, is the main component of the cartilage extracellular matrix (ECM). The loss of PGs is accompanied by the chronic degeneration of cartilage tissue, which is an irreversible degeneration process that eventually develops into osteoarthritis (OA). Unfortunately, there is still no substitute for PGs in clinical treatments. Herein, we propose a new PGs analogue. The Glycopolypeptide hydrogels in the experimental groups with different concentrations were prepared by Schiff base reaction (Gel-1, Gel-2, Gel-3, Gel-4, Gel-5 and Gel-6). They have good biocompatibility and adjustable enzyme-triggered degradability. The hydrogels have a loose and porous structure suitable for the proliferation, adhesion, and migration of chondrocytes, good anti-swelling, and reduce the reactive oxygen species (ROS) in chondrocytes. In vitro experiments confirmed that the glycopolypeptide hydrogels significantly promoted ECM deposition and up-regulated the expression of cartilage-specific genes, such as type-II collagen, aggrecan, and glycosaminoglycans (sGAG). In vivo, the New Zealand rabbit knee articular cartilage defect model was established and the hydrogels were implanted to repair it, the results showed good cartilage regeneration potential. It is worth noting that the Gel-3 group, with a pore size of 122 ​± ​12 ​μm, was particularly prominent in the above experiments, and provides a theoretical reference for the design of cartilage-tissue regeneration materials in the future.

Rosmarinic Acid-Grafted Dextran/Gelatin Hydrogel as a Wound Dressing with Improved Properties: Strong Tissue Adhesion, Antibacterial, Antioxidant and Anti-Inflammatory

Designing a strong tissue adhesive and multifunctional hydrogel dressing for various skin injuries is still a significant challenge. Based on the bioactive activities of rosmarinic acid (RA) and its catechol structure being similar to dopamine, RA-grafted dextran/gelatin hydrogel (ODex-AG-RA) was designed and systemically characterized in this study. The ODex-AG-RA hydrogel exhibited excellent physicochemical properties, including fast gelation time (61.6 ± 2.8 s), strong adhesive strength (27.30 ± 2.02 kPa) and enhanced mechanical properties (1.31 × 10⁴ Pa of G'). The examination of hemolysis and co-culturing with L929 cells showed the strong in vitro biocompatibility of ODex-AG-RA hydrogels. The ODex-AG-RA hydrogels exhibited a 100% mortality rate against S. aureus and at least 89.7% against E. coli in vitro. In vivo evaluation for efficacy in skin wound healing was carried out in a rat model of full-thickness skindefect. The amount of collagen deposition and CD31 on wounds in the two ODex-AG-RA-1 groups on day 14 was 4.3 times and 2.3 times of that in the control group, respectively. Furthermore, the mechanism of ODex-AG-RA-1 for promoting wound healing was proved to be related to its anti-inflammatory properties by adjusting the expression of inflammatory cytokines (TNF-α and CD163) and reducing the level of oxidative stress (MDA and H₂O₂). Overall, this study demonstrated the wound-healing efficacy of RA-grafted hydrogels for the first time. ODex-AG-RA-1 hydrogel, due to its adhesive, anti-inflammatory, antibacterial and antioxidative activities, was a promising candidate as a wound dressing.

Optimization of thermoresponsive chitosan/β-glycerophosphate hydrogels for injectable neural tissue engineering application

Regeneration of neural tissue and recovery of lost functions following an accident or disease to the central nervous system remains a major challenge worldwide, with limited treatment options available. The main reason for the failure of conventional therapeutic techniques to regenerate neural tissue is the presence of blood-brain barrier separating nervous system from systemic circulation and the limited capacity of self-regeneration of the nervous system. Injectable hydrogels have shown great promise for neural tissue engineering given their suitability for minimally invasive in situ delivery and tunable mechanical and biological properties. Chitosan (CS)/β-glycerophosphate (β-GP) hydrogels have been extensively investigated and shown regenerative potential in a wide variety of tissues such as bone and cartilage tissue engineering. However, the potential of CS/β-GP hydrogels has never been tested for injectable neural tissue engineering applications. In the present study, CS/β-GP hydrogels, consisting of 0.5-2% CS and 2-3% β-GP, were prepared and characterized to investigate their suitability for injectable neural tissue engineering applications. The resulting CS/β-GP-hydrogels showed a varying range of properties depending on the CS/β-GP blend ratio. In particular, the 0.5%:3% and 0.75%:3% CS/β-GP hydrogels underwent rapid gelation (3 min and 5 min, respectively) at physiological temperature (37 °C) and pH (7.4). They also had suitable porosity, osmolality, swelling behavior and biodegradation for tissue engineering. The biocompatibility of hydrogels was determined in vitro using PC12 cells, an immortalized cell line with neuronal cell-like properties, revealing that these hydrogels supported cell growth and proliferation. In conclusion, the thermoresponsive 0.5%:3% and 0.75%:3% CS/β-GP hydrogels had the greatest potential for neural tissue engineering.

Role of Hydrophobic Associations in Self-Healing Hydrogels Based on Amphiphilic Polysaccharides

Self-healing hydrogels have the ability to recover their original properties after the action of an external stress, due to presence in their structure of reversible chemical or physical cross-links. The physical cross-links lead to supramolecular hydrogels stabilized by hydrogen bonds, hydrophobic associations, electrostatic interactions, or host-guest interactions. Hydrophobic associations of amphiphilic polymers can provide self-healing hydrogels with good mechanical properties, and can also add more functionalities to these hydrogels by creating hydrophobic microdomains inside the hydrogels. This review highlights the main general advantages brought by hydrophobic associations in the design of self-healing hydrogels, with a focus on hydrogels based on biocompatible and biodegradable amphiphilic polysaccharides.

Healing Wounds Efficiently with Biomimetic Soft Matter: Injectable Self-Healing Neutral Glycol Chitosan/Dibenzaldehyde-Terminated Poly(ethylene glycol) Hydrogel with Inherent Antibacterial Properties

The high prevalence of acquiring skin wounds, along with the emergence of antibiotic-resistant strains that lead to infections, impose a threat to the physical, mental, and socioeconomic health of society. Among the wide array of wound dressings developed, hydrogels are regarded as a biomimetic soft matter of choice owing to their ability to provide a moist environment ideal for healing. Herein, neutral glycol chitosan (GC) was cross-linked via imine bonds with varying concentrations of dibenzaldehyde-terminated polyethylene glycol (DP) to give glycol chitosan/dibenzaldehyde-terminated polyethylene glycol hydrogels (GC/DP). These dynamic Schiff base linkages (absorption peak at 1638 cm^-1) within the hydrogel structure endowed their ability to recover from damage as characterized by high-low strain exposure in continuous step strain rheology. Along with their good injectability and biodegradability, the hydrogels exhibited remarkable inhibition against E. coli, P. aeruginosa, and S. aureus. GC/DP hydrogels demonstrated high LC50 values in vivo using zebrafish embryos as a model system due to their relative biocompatibility and a remarkable 93.4 ± 0.88% wound contraction at 30-dpw against 49.1 ± 3.40% of the control. To the best of our knowledge, this is the first study that developed injectable glycol chitosan/dibenzaldehyde-terminated polyethylene glycol self-healing hydrogels for application in wound healing with intrinsic bacteriostatic properties against the three bacteria.

Chitosan-Based Hemostatic Hydrogels: The Concept, Mechanism, Application, and Prospects

The design of new hemostatic materials to mitigate uncontrolled bleeding in emergencies is challenging. Chitosan-based hemostatic hydrogels have frequently been used for hemostasis due to their unique biocompatibility, tunable mechanical properties, injectability, and ease of handling. Moreover, chitosan (CS) absorbs red blood cells and activates platelets to promote hemostasis. Benefiting from these desired properties, the hemostatic application of CS hydrogels is attracting ever-increasing research attention. This paper reviews the recent research progress of CS-based hemostatic hydrogels and their advantageous characteristics compared to traditional hemostatic materials. The effects of the hemostatic mechanism, effects of deacetylation degree, relative molecular mass, and chemical modification on the hemostatic performance of CS hydrogels are summarized. Meanwhile, some typical applications of CS hydrogels are introduced to provide references for the preparation of efficient hemostatic hydrogels. Finally, the future perspectives of CS-based hemostatic hydrogels are presented.

Polysaccharides for Medical Technology: Properties and Applications

Over the past decade, the use of polysaccharides has gained tremendous attention in the field of medical technology. They have been applied in various sectors such as tissue engineering, drug delivery system, face mask, and bio-sensing. This review article provides an overview and background of polysaccharides for biomedical uses. Different types of polysaccharides, for example, cellulose and its derivatives, chitin and chitosan, hyaluronic acid, alginate, and pectin are presented. They are fabricated in various forms such as hydrogels, nanoparticles, membranes, and as porous mediums. Successful development and improvement of polysaccharide-based materials will effectively help users to enhance their quality of personal health, decrease cost, and eventually increase the quality of life with respect to sustainability.

Facile fabrication of a novel self-healing and flame-retardant hydrogel/MXene coating for wood

To improve flame retardancy of wood, a novel high-water-retention and self-healing polyvinyl alcohol/phytic acid/MXene hydrogel coating was developed through facile one-pot heating and freeze-thaw cycle methods, and then painted on wood surface. The coating exhibit excellent self-healing property and significantly enhanced water-retention property (water content ≥ 90 wt%), due to the increased hydrogen bonds within the coating system with the presence of MXene nanosheets. Compared to pristine wood, the flame retardancy of coated wood is greatly improved, such as passed V0 rating in UL-94 test, increasing time to ignition (TTI, from 32 to 69 s), and decreased heat release rate and total heat release by 41.6% and 36.14%. The cooling effect and large thermal capacity of high-water-retention hydrogel, and physical barrier effects for flammable gas products, heat and oxygen by MXene nanosheets and the compact char layer formed during combustion play key roles in the flame retardancy enhancements of the wood. High thermal stability of MXene nanosheets is another beneficial factor. The detailed flame-retardant and self-healing mechanisms were proposed.

Constructing a self-healing injectable SABA/Borax/PDA@AgNPs hydrogel for synergistic low-temperature photothermal antibacterial therapy

Infections caused by bacteria are one of the biggest challenges humans face around the world. Photothermal therapy (PTT) has been regarded as a promising strategy in combating pathogenic infection, however the high temperatures (55-65 °C) required during a single PTT process can induce injury to healthy tissues nearby. Combination therapy could overcome this problem by reducing the photothermal temperature. Here, we developed a self-healing and injectable hydrogel to realize low-temperature PTT (LT-PTT, ≤45 °C) for antisepsis with high-efficiency. The hybrid hydrogel is prepared by incorporating borax into a mixture of 3-aminophenylboronic acid grafted sodium alginate and nano-silver decorated polydopamine nanoparticles. Our results showed that the SABA/Borax/PDA@AgNPs hydrogel possesses satisfactory mechanical properties and self-healing capacity, and as a result, it can repair itself after being damaged mechanically, retaining its integrality and recovering its initial functionalities. Furthermore, through utilizing the photothermal property of polydopamine nanoparticles and broad-spectrum antibacterial activity of nano-silver, the hybrid hydrogel achieves excellent LT-PTT for sterilization both in vitro as well as in an in vivo mice skin wound model with no distinct injury to normal tissues. Overall, our prepared hydrogel is expected to be an excellent candidate for treating bacterial infections.

Chitosan-Based Hydrogels for Bioelectronic Sensing: Recent Advances and Applications in Biomedicine and Food Safety

Due to the lack of efficient bioelectronic interfaces, the communication between biology and electronics has become a great challenge, especially in constructing bioelectronic sensing. As natural polysaccharide biomaterials, chitosan-based hydrogels exhibit the advantages of flexibility, biocompatibility, mechanical tunability, and stimuli sensitivity, and could serve as an excellent interface for bioelectronic sensors. Based on the fabrication approaches, interaction mechanisms, and bioelectronic communication modalities, this review divided chitosan-based hydrogels into four types, including electrode-based hydrogels, conductive materials conjugated hydrogels, ionically conductive hydrogels, and redox-based hydrogels. To introduce the enhanced performance of bioelectronic sensors, as a complementary alternative, the incorporation of nanoparticles and redox species in chitosan-based hydrogels was discussed. In addition, the multifunctional properties of chitosan-based composite hydrogels enable their applications in biomedicine (e.g., smart skin patches, wood healing, disease diagnosis) and food safety (e.g., electrochemical sensing, smart sensing, artificial bioelectronic tongue, fluorescence sensors, surface-enhanced Raman scattering). We believe that this review will shed light on the future development of chitosan-based biosensing hydrogels for micro-implantable devices and human-machine interactions, as well as potential applications in medicine, food, agriculture, and other fields.

Polysaccharides-Based Injectable Hydrogels: Preparation, Characteristics, and Biomedical Applications

Polysaccharides-based injectable hydrogels are a unique group of biodegradable and biocompatible materials that have shown great potential in the different biomedical fields. The biomolecules or cells can be simply blended with the hydrogel precursors with a high loading capacity by homogenous mixing. The different physical and chemical crosslinking approaches for preparing polysaccharide-based injectable hydrogels are reviewed. Additionally, the review highlights the recent work using polysaccharides-based injectable hydrogels as stimuli-responsive delivery vehicles for the controlled release of different therapeutic agents and viscoelastic matrix for cell encapsulation. Moreover, the application of polysaccharides-based injectable hydrogel in regenerative medicine as tissue scaffold and wound healing dressing is covered.

Nanocarrier system: An emerging strategy for bioactive peptide delivery

Compared with small-molecule synthetic drugs, bioactive peptides have desirable advantages in efficiency, selectivity, safety, tolerance, and side effects, which are accepted by attracting extensive attention from researchers in food, medicine, and other fields. However, unacceptable barriers, including mucus barrier, digestive enzyme barrier, and epithelial barrier, cause the weakening or the loss of bioavailability and biostability of bioactive peptides. The nanocarrier system for bioactive peptide delivery needs to be further probed. We provide a comprehensive update on the application of versatile delivery systems for embedding bioactive peptides, including liposomes, polymer nanoparticles, polysaccharides, hydrogels, and self-emulsifying delivery systems, and further clarify their structural characterization, advantages, and disadvantages as delivery systems. It aims to provide a reference for the maximum utilization of bioactive peptides. It is expected to be an effective strategy for improving the bioavailability and biostability of bioactive peptides.

Preparation and properties of CS/P(AM-co-AA) composite hydrogels by frontal polymerization of ternary DES

A deep eutectic solvent (DES) was prepared from choline chloride (ChCl), acrylamide (AM) and acrylic acid (AA); chitosan (CS) was used as a filler, and CS/P(AM-co-AA) composite hydrogels were prepared by frontal polymerization (FP). The hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The mechanical properties, pH responsiveness and conductivity of the hydrogel were studied. The results showed that the mechanical properties of the hydrogel were significantly improved by adding CS, and the tensile strength and compressive strength were increased by 11.61 and 1.65 times respectively due to the increase in number of hydrogen bonds. At the same time, due to the presence of AA, the composite hydrogel has excellent pH response and super high swelling performance under alkaline conditions. The introduction of CS enhanced the conductivity of the hydrogel and gradually increased with the increase of CS content. The conductivity of the hydrogel with CS content of 10 wt% was nearly 160 times that of the hydrogel without CS. In this study, a more convenient and rapid method was proposed to prepare conductive composite hydrogels with excellent mechanical properties and pH responsiveness.

Photothermal nanohybrid hydrogels for biomedical applications

In the past decades, diseases such as wound infection, cancer, bone defect and osteoarthritis have constantly threatened the public health. However, the traditional treatment has many insufficiencies, such as high cost, easy recurrence and high biological toxicity. Hydrogel is a material with three-dimensional network structure, which has a series of advantages, such as injectability, self-heal ability, easy loading and controllability of drug release, and excellent biocompatibility. Therefore, it is extensively used in drug delivery, antibacterial, anti-cancer and other fields. However, the traditional hydrogels have the single performance, and therapeutic efficacy is often rely on the drugs loaded on them to cure diseases, which cannot achieve sustainable therapeutic effect. In order to solve this problem, photothermal nano hydrogel with photothermal agent (PTA) has become an ideal material due to its excellent physical and chemical properties. Photothermal nano hydrogels used in photothermal therapy (PTT) can exploit the photothermal effect of photothermal agent to increase local temperature and control the sol-gel phase transition behavior of hydrogels, so they are widely used in drug release, photothermal sterilization, photothermal inhibition of cancer cells and enhancement of bone repair. To sum up, this paper introduces the preparation of hydrogels with photothermal nanomaterials, and discusses their applications in the fields of drug release, photothermal sterilization, photothermal cancer cell inhibition and enhanced bone repair.

Self-Healing Hydrogels: Development, Biomedical Applications, and Challenges

Polymeric hydrogels have drawn considerable attention as a biomedical material for their unique mechanical and chemical properties, which are very similar to natural tissues. Among the conventional hydrogel materials, self-healing hydrogels (SHH) are showing their promise in biomedical applications in tissue engineering, wound healing, and drug delivery. Additionally, their responses can be controlled via external stimuli (e.g., pH, temperature, pressure, or radiation). Identifying a suitable combination of viscous and elastic materials, lipophilicity and biocompatibility are crucial challenges in the development of SHH. Furthermore, the trade-off relation between the healing performance and the mechanical toughness also limits their real-time applications. Additionally, short-term and long-term effects of many SHH in the in vivo model are yet to be reported. This review will discuss the mechanism of various SHH, their recent advancements, and their challenges in tissue engineering, wound healing, and drug delivery.

Multifunctional Composite Hydrogels for Bacterial Capture, Growth/Elimination, and Sensing Applications

Hydrogels are cross-linked networks of hydrophilic polymer chains with a three-dimensional structure. Owing to their unique features, the application of hydrogels for bacterial/antibacterial studies and bacterial infection management has grown in importance in recent years. This trend is likely to continue due to the rise in bacterial infections and antimicrobial resistance. By exploiting their physicochemical characteristics and inherent nature, hydrogels have been developed to achieve bacterial capture and detection, bacterial growth or elimination, antibiotic delivery, or bacterial sensing. Traditionally, the development of hydrogels for bacterial/antibacterial studies has focused on achieving a single function such as antibiotic delivery, antibacterial activity, bacterial growth, or bacterial detection. However, recent studies demonstrate the fabrication of multifunctional hydrogels, where a single hydrogel is capable of performing more than one bacterial/antibacterial function, or composite hydrogels consisting of a number of single functionalized hydrogels, which exhibit bacterial/antibacterial function synergistically. In this review, we first highlight the hydrogel features critical for bacterial studies and infection management. Then, we specifically address unique hydrogel properties, their surface/network functionalization, and their mode of action for bacterial capture, adhesion/growth, antibacterial activity, and bacterial sensing, respectively. Finally, we provide insights into different strategies for developing multifunctional hydrogels and how such systems can help tackle, manage, and understand bacterial infections and antimicrobial resistance. We also note that the strategies highlighted in this review can be adapted to other cell types and are therefore likely to find applications beyond the field of microbiology.

Inspired by the Periodontium: A Universal Bacteria-Defensive Hydrogel for Preventing Percutaneous Device-Related Infection

Percutaneous device-related infection has greatly shortened the service period of devices and seriously reduced the quality of life of patients. Bacteria are one of the main pathogenic factors and cannot be effectively and conveniently eradicated by traditional strategies (e.g., construct coatings and introduce antibiotics), due to the complex interface among medical devices, surrounding tissue, and colonizing bacteria. Inspired by the periodontium, a universal bacteria-defensive hydrogel adapting to the complicated interface is fabricated by introducing phenol-amine chemistry to a polymeric matrix of N-hydroxyethyl acrylamide (HPC hydrogels). The HPC hydrogels with excellent toughness (2.1 MJ/m3), adhesion (10.2 and 13.2 kPa for pigskin and Ti-6Al-4V alloy, respectively), and antibacterial property (up to 99.9% for both Escherichia coli and Staphylococcus aureus) contributed to the innate microbe barrier via sealing the tissue-device interface and adaptive defense to eradicate bacteria. Meanwhile, bacterial invasion experiments demonstrate HPC hydrogels possess both a bacteria-defensive property (up to 24 h) and cell-protecting function at the same time. Furthermore, the biocompatibility of HPC hydrogels is verified in tests for in vitro cytotoxicity and in vivo irritation. Hence, the designed HPC hydrogels are considered as an emerging and universal candidate for preventing bacterial infection and can protect the deep tissue around a percutaneous device.

Injectable and Self-Healing Hydrogel Based on Chitosan-Tannic Acid and Oxidized Hyaluronic Acid for Wound Healing

Self-healing performance plays an important role in the in situ microinvasive injection of hydrogels, which can reduce sudden drug release and prolong the service life of hydrogels. In this paper, a multifunctional injectable and self-healing hydrogel for wound healing was developed. Chitosan (CS) was modified with TA to achieve potential adhesion, anti-inflammatory properties, and slower degradation rate. The hydrogel was formed by Schiff base reaction based on amino groups in CS and aldehyde groups in oxidized hyaluronic acid (OHA). The gel formation process was quick and convenient in mild conditions without extra initiators. Due to the dynamically reversible covalent bonds, the hydrogel could self-heal within 2 min after injection. It also had good biocompatibility and hemostatic performance. With the addition of TA, the hydrogel acquired anti-inflammatory properties and promoted cell growth, effectively accelerating the wound-healing process in vivo. The CS-TA/OHA hydrogel is expected to be used for skin repair.